From c80762b0a1cdba101aec4aa2b1cae281331a162e Mon Sep 17 00:00:00 2001 From: eap Date: Tue, 28 Feb 2017 19:42:01 +0300 Subject: [PATCH] 23414: EDF 14228 - Viscous Layer crashes SALOME This is the case where a FACE is shrunk in two SOLIDs but VL is on different EDGEs --- src/DriverDAT/DriverDAT_W_SMDS_Mesh.cxx | 2 +- src/SMDS/SMDS_Mesh.cxx | 12 +-- src/SMDS/SMDS_MeshElement.hxx | 2 +- src/SMESH/SMESH_MeshEditor.cxx | 3 +- src/SMESH/SMESH_MeshEditor.hxx | 3 +- src/StdMeshers/StdMeshers_ViscousLayers.cxx | 81 ++++++++++++++++----- 6 files changed, 75 insertions(+), 28 deletions(-) diff --git a/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cxx b/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cxx index 0b54a200a..7ab288f86 100644 --- a/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cxx +++ b/src/DriverDAT/DriverDAT_W_SMDS_Mesh.cxx @@ -130,7 +130,7 @@ Driver_Mesh::Status DriverDAT_W_SMDS_Mesh::Perform() std::vector quant = v->GetQuantities(); if ( !quant.empty() ) { - fprintf(aFileId, "%d %d ", quant.size(), quant[0]); + fprintf(aFileId, "%d %d ", (int)quant.size(), quant[0]); for ( size_t i = 1; i < quant.size(); ++i ) fprintf(aFileId, "%d ", quant[i]); } diff --git a/src/SMDS/SMDS_Mesh.cxx b/src/SMDS/SMDS_Mesh.cxx index ffb2926b9..808873c38 100644 --- a/src/SMDS/SMDS_Mesh.cxx +++ b/src/SMDS/SMDS_Mesh.cxx @@ -3233,7 +3233,7 @@ void SMDS_Mesh::RemoveElement(const SMDS_MeshElement * elem, if (const SMDS_VtkEdge* vtkElem = dynamic_cast(*it)) myEdgePool->destroy((SMDS_VtkEdge*) vtkElem); else { - ((SMDS_MeshElement*) *it)->init( -1, -1, -1 ); // avoid reuse + ((SMDS_MeshElement*) *it)->init( 0, -1, -1 ); // avoid reuse delete (*it); } break; @@ -3248,7 +3248,7 @@ void SMDS_Mesh::RemoveElement(const SMDS_MeshElement * elem, if (const SMDS_VtkFace* vtkElem = dynamic_cast(*it)) myFacePool->destroy((SMDS_VtkFace*) vtkElem); else { - ((SMDS_MeshElement*) *it)->init( -1, -1, -1 ); // avoid reuse + ((SMDS_MeshElement*) *it)->init( 0, -1, -1 ); // avoid reuse delete (*it); } break; @@ -3263,7 +3263,7 @@ void SMDS_Mesh::RemoveElement(const SMDS_MeshElement * elem, if (const SMDS_VtkVolume* vtkElem = dynamic_cast(*it)) myVolumePool->destroy((SMDS_VtkVolume*) vtkElem); else { - ((SMDS_MeshElement*) *it)->init( -1, -1, -1 ); // avoid reuse + ((SMDS_MeshElement*) *it)->init( 0, -1, -1 ); // avoid reuse delete (*it); } break; @@ -3278,7 +3278,7 @@ void SMDS_Mesh::RemoveElement(const SMDS_MeshElement * elem, if (const SMDS_BallElement* vtkElem = dynamic_cast(*it)) myBallPool->destroy(const_cast( vtkElem )); else { - ((SMDS_MeshElement*) *it)->init( -1, -1, -1 ); // avoid reuse + ((SMDS_MeshElement*) *it)->init( 0, -1, -1 ); // avoid reuse delete (*it); } break; @@ -3340,7 +3340,7 @@ void SMDS_Mesh::RemoveFreeElement(const SMDS_MeshElement * elem) myNodes[elemId] = 0; myInfo.myNbNodes--; ((SMDS_MeshNode*) n)->SetPosition(SMDS_SpacePosition::originSpacePosition()); - ((SMDS_MeshNode*) n)->SMDS_MeshElement::init( -1, -1, -1 ); // avoid reuse + ((SMDS_MeshNode*) n)->SMDS_MeshElement::init( 0, -1, -1 ); // avoid reuse myNodePool->destroy(static_cast(todest)); myNodeIDFactory->ReleaseID(elemId, vtkId); } @@ -3396,7 +3396,7 @@ void SMDS_Mesh::RemoveFreeElement(const SMDS_MeshElement * elem) // --- to do: keep vtkid in a list of reusable cells if ( elem ) - ((SMDS_MeshElement*) elem)->init( -1, -1, -1 ); // avoid reuse + ((SMDS_MeshElement*) elem)->init( 0, -1, -1 ); // avoid reuse } } diff --git a/src/SMDS/SMDS_MeshElement.hxx b/src/SMDS/SMDS_MeshElement.hxx index d114c02da..620e4d82d 100644 --- a/src/SMDS/SMDS_MeshElement.hxx +++ b/src/SMDS/SMDS_MeshElement.hxx @@ -57,7 +57,7 @@ class SMDS_Mesh; // ============================================================ -class SMDS_EXPORT SMDS_MeshElement:public SMDS_MeshObject +class SMDS_EXPORT SMDS_MeshElement : public SMDS_MeshObject { public: diff --git a/src/SMESH/SMESH_MeshEditor.cxx b/src/SMESH/SMESH_MeshEditor.cxx index d975229cf..817a28b21 100644 --- a/src/SMESH/SMESH_MeshEditor.cxx +++ b/src/SMESH/SMESH_MeshEditor.cxx @@ -7345,7 +7345,8 @@ int SMESH_MeshEditor::SimplifyFace (const vector& faceNod // in all elements. //======================================================================= -void SMESH_MeshEditor::MergeNodes (TListOfListOfNodes & theGroupsOfNodes) +void SMESH_MeshEditor::MergeNodes (TListOfListOfNodes & theGroupsOfNodes, + const bool theAvoidMakingHoles) { myLastCreatedElems.Clear(); myLastCreatedNodes.Clear(); diff --git a/src/SMESH/SMESH_MeshEditor.hxx b/src/SMESH/SMESH_MeshEditor.hxx index 103e4a417..e251e4f9c 100644 --- a/src/SMESH/SMESH_MeshEditor.hxx +++ b/src/SMESH/SMESH_MeshEditor.hxx @@ -471,7 +471,8 @@ public: // Return list of group of nodes close to each other within theTolerance. // Search among theNodes or in the whole mesh if theNodes is empty. - void MergeNodes (TListOfListOfNodes & theNodeGroups); + void MergeNodes (TListOfListOfNodes & theNodeGroups, + const bool theAvoidMakingHoles = false); // In each group, the cdr of nodes are substituted by the first one // in all elements. diff --git a/src/StdMeshers/StdMeshers_ViscousLayers.cxx b/src/StdMeshers/StdMeshers_ViscousLayers.cxx index e977252e6..2513c991c 100644 --- a/src/StdMeshers/StdMeshers_ViscousLayers.cxx +++ b/src/StdMeshers/StdMeshers_ViscousLayers.cxx @@ -95,7 +95,7 @@ #include #ifdef _DEBUG_ -#define __myDEBUG +//#define __myDEBUG //#define __NOT_INVALIDATE_BAD_SMOOTH //#define __NODES_AT_POS #endif @@ -440,7 +440,7 @@ namespace VISCOUS_3D DISTORTED = 0x0001000, // was bad before smoothing RISKY_SWOL = 0x0002000, // SWOL is parallel to a source FACE SHRUNK = 0x0004000, // target node reached a tgt position while shrink() - UNUSED_FLAG = 0x0100000 + UNUSED_FLAG = 0x0100000 // to add use flags after }; bool Is ( int flag ) const { return _flags & flag; } void Set ( int flag ) { _flags |= flag; } @@ -4158,7 +4158,7 @@ void _LayerEdge::SetDataByNeighbors( const SMDS_MeshNode* n1, //================================================================================ /*! * \brief Copy data from a _LayerEdge of other SOLID and based on the same node; - * this and other _LayerEdge's are inflated along a FACE or an EDGE + * this and the other _LayerEdge are inflated along a FACE or an EDGE */ //================================================================================ @@ -4508,7 +4508,10 @@ bool _ViscousBuilder::inflate(_SolidData& data) const double shapeTgtThick = eos._hyp.GetTotalThickness(); for ( size_t i = 0; i < eos._edges.size(); ++i ) { - avgThick += Min( 1., eos._edges[i]->_len / shapeTgtThick ); + if ( eos._edges[i]->_nodes.size() > 1 ) + avgThick += Min( 1., eos._edges[i]->_len / shapeTgtThick ); + else + avgThick += shapeTgtThick; nbActiveEdges += ( ! eos._edges[i]->Is( _LayerEdge::BLOCKED )); } } @@ -9804,6 +9807,7 @@ bool _ViscousBuilder::shrink(_SolidData& theData) continue; _SolidData& data = *dataList.front(); + _SolidData* data2 = dataList.size() > 1 ? dataList.back() : 0; const TopoDS_Face& F = TopoDS::Face( getMeshDS()->IndexToShape( f2sd->first )); SMESH_subMesh* sm = _mesh->GetSubMesh( F ); SMESHDS_SubMesh* smDS = sm->GetSubMeshDS(); @@ -9817,7 +9821,7 @@ bool _ViscousBuilder::shrink(_SolidData& theData) // Prepare data for shrinking // =========================== - // Collect nodes to smooth, they are marked at the beginning of this method + // Collect nodes to smooth (they are marked at the beginning of this method) vector < const SMDS_MeshNode* > smoothNodes; { SMDS_NodeIteratorPtr nIt = smDS->GetNodes(); @@ -9855,8 +9859,13 @@ bool _ViscousBuilder::shrink(_SolidData& theData) if ( data._noShrinkShapes.count( subID )) continue; _EdgesOnShape* eos = data.GetShapeEdges( subID ); - if ( !eos || eos->_sWOL.IsNull() ) continue; - + if ( !eos || eos->_sWOL.IsNull() ) + if ( data2 ) // check in adjacent SOLID + { + eos = data2->GetShapeEdges( subID ); + if ( !eos || eos->_sWOL.IsNull() ) + continue; + } subEOS.push_back( eos ); for ( size_t i = 0; i < eos->_edges.size(); ++i ) @@ -9916,7 +9925,7 @@ bool _ViscousBuilder::shrink(_SolidData& theData) { const SMDS_MeshNode* n = smoothNodes[i]; nodesToSmooth[ i ]._node = n; - // src nodes must be replaced by tgt nodes to have tgt nodes in _simplices + // src nodes must be already replaced by tgt nodes to have tgt nodes in _simplices _Simplex::GetSimplices( n, nodesToSmooth[ i ]._simplices, ignoreShapes, 0, sortSimplices); // fix up incorrect uv of nodes on the FACE helper.GetNodeUV( F, n, 0, &isOkUV); @@ -10285,6 +10294,8 @@ bool _ViscousBuilder::shrink(_SolidData& theData) // Set an event listener to clear FACE sub-mesh together with SOLID sub-mesh VISCOUS_3D::ToClearSubWithMain( sm, data._solid ); + if ( data2 ) + VISCOUS_3D::ToClearSubWithMain( sm, data2->_solid ); } // loop on FACES to srink mesh on @@ -10363,7 +10374,7 @@ bool _ViscousBuilder::prepareEdgeToShrink( _LayerEdge& edge, double uSrc = helper.GetNodeU( E, srcNode, n2 ); double uTgt = helper.GetNodeU( E, tgtNode, srcNode ); - double u2 = helper.GetNodeU( E, n2, srcNode ); + double u2 = helper.GetNodeU( E, n2, srcNode ); //edge._pos.clear(); @@ -10898,7 +10909,7 @@ void _Shrinker1D::AddEdge( const _LayerEdge* e, _done = false; } // check _LayerEdge - if ( e == _edges[0] || e == _edges[1] ) + if ( e == _edges[0] || e == _edges[1] || e->_nodes.size() < 2 ) return; if ( eos.SWOLType() != TopAbs_EDGE ) throw SALOME_Exception(LOCALIZED("Wrong _LayerEdge is added")); @@ -11099,7 +11110,8 @@ bool _ViscousBuilder::addBoundaryElements(_SolidData& data) for ( int iE = 1; iE <= geomEdges.Extent(); ++iE ) { const TopoDS_Edge& E = TopoDS::Edge( geomEdges(iE)); - if ( data._noShrinkShapes.count( getMeshDS()->ShapeToIndex( E ))) + const TGeomID edgeID = getMeshDS()->ShapeToIndex( E ); + if ( data._noShrinkShapes.count( edgeID )) continue; // Get _LayerEdge's based on E @@ -11148,10 +11160,9 @@ bool _ViscousBuilder::addBoundaryElements(_SolidData& data) // Find out orientation and type of face to create bool reverse = false, isOnFace; - - map< TGeomID, TopoDS_Shape >::iterator e2f = - data._shrinkShape2Shape.find( getMeshDS()->ShapeToIndex( E )); TopoDS_Shape F; + + map< TGeomID, TopoDS_Shape >::iterator e2f = data._shrinkShape2Shape.find( edgeID ); if (( isOnFace = ( e2f != data._shrinkShape2Shape.end() ))) { F = e2f->second.Oriented( TopAbs_FORWARD ); @@ -11177,18 +11188,44 @@ bool _ViscousBuilder::addBoundaryElements(_SolidData& data) if ( !sm ) return error("error in addBoundaryElements()", data._index); + // Find a proxy sub-mesh of the FACE of an adjacent SOLID, which will use the new boundary + // faces for 3D meshing (PAL23414) + SMESHDS_SubMesh* adjSM = 0; + if ( isOnFace ) + { + const TGeomID faceID = sm->GetID(); + PShapeIteratorPtr soIt = helper.GetAncestors( F, *_mesh, TopAbs_SOLID ); + while ( const TopoDS_Shape* solid = soIt->next() ) + if ( !solid->IsSame( data._solid )) + { + size_t iData = _solids.FindIndex( *solid ) - 1; + if ( iData < _sdVec.size() && + _sdVec[ iData ]._ignoreFaceIds.count( faceID ) && + _sdVec[ iData ]._shrinkShape2Shape.count( edgeID ) == 0 ) + { + SMESH_ProxyMesh::SubMesh* proxySub = + _sdVec[ iData ]._proxyMesh->getFaceSubM( TopoDS::Face( F ), /*create=*/false); + if ( proxySub && proxySub->NbElements() > 0 ) + adjSM = proxySub; + } + } + } + // Make faces const int dj1 = reverse ? 0 : 1; const int dj2 = reverse ? 1 : 0; + vector< const SMDS_MeshElement*> ff; // new faces row + SMESHDS_Mesh* m = getMeshDS(); for ( size_t j = 1; j < ledges.size(); ++j ) { vector< const SMDS_MeshNode*>& nn1 = ledges[j-dj1]->_nodes; vector< const SMDS_MeshNode*>& nn2 = ledges[j-dj2]->_nodes; + ff.resize( std::max( nn1.size(), nn2.size() ), NULL ); if ( nn1.size() == nn2.size() ) { if ( isOnFace ) for ( size_t z = 1; z < nn1.size(); ++z ) - sm->AddElement( getMeshDS()->AddFace( nn1[z-1], nn2[z-1], nn2[z], nn1[z] )); + sm->AddElement( ff[z-1] = m->AddFace( nn1[z-1], nn2[z-1], nn2[z], nn1[z] )); else for ( size_t z = 1; z < nn1.size(); ++z ) sm->AddElement( new SMDS_FaceOfNodes( nn1[z-1], nn2[z-1], nn2[z], nn1[z] )); @@ -11197,7 +11234,7 @@ bool _ViscousBuilder::addBoundaryElements(_SolidData& data) { if ( isOnFace ) for ( size_t z = 1; z < nn2.size(); ++z ) - sm->AddElement( getMeshDS()->AddFace( nn1[0], nn2[z-1], nn2[z] )); + sm->AddElement( ff[z-1] = m->AddFace( nn1[0], nn2[z-1], nn2[z] )); else for ( size_t z = 1; z < nn2.size(); ++z ) sm->AddElement( new SMDS_FaceOfNodes( nn1[0], nn2[z-1], nn2[z] )); @@ -11206,11 +11243,19 @@ bool _ViscousBuilder::addBoundaryElements(_SolidData& data) { if ( isOnFace ) for ( size_t z = 1; z < nn1.size(); ++z ) - sm->AddElement( getMeshDS()->AddFace( nn1[z-1], nn2[0], nn1[z] )); + sm->AddElement( ff[z-1] = m->AddFace( nn1[z-1], nn2[0], nn1[z] )); else for ( size_t z = 1; z < nn1.size(); ++z ) sm->AddElement( new SMDS_FaceOfNodes( nn1[z-1], nn2[0], nn2[z] )); } + + if ( adjSM ) // add faces to a proxy SM of the adjacent SOLID + { + for ( size_t z = 0; z < ff.size(); ++z ) + if ( ff[ z ]) + adjSM->AddElement( ff[ z ]); + ff.clear(); + } } // Make edges @@ -11221,7 +11266,7 @@ bool _ViscousBuilder::addBoundaryElements(_SolidData& data) if ( eos && eos->SWOLType() == TopAbs_EDGE ) { vector< const SMDS_MeshNode*>& nn = edge->_nodes; - if ( nn.size() < 2 || nn[1]->GetInverseElementIterator( SMDSAbs_Edge )->more() ) + if ( nn.size() < 2 || nn[1]->NbInverseElements( SMDSAbs_Edge ) >= 2 ) continue; helper.SetSubShape( eos->_sWOL ); helper.SetElementsOnShape( true ); -- 2.30.2