From 7d57cfe3069f0be65c6773ff704c2642129b2bb8 Mon Sep 17 00:00:00 2001 From: eap Date: Mon, 11 Jan 2021 12:42:05 +0300 Subject: [PATCH] Fix typos by Kunda https://www.salome-platform.org/forum/forum_9/875695368/263950625 --- doc/salome/examples/generate_flat_elements.py | 2 +- doc/salome/gui/SMESH/input/about_filters.rst | 2 +- doc/salome/gui/SMESH/input/measurements.rst | 2 +- doc/salome/gui/SMESH/input/mesh_infos.rst | 2 +- .../gui/SMESH/input/tui_modifying_meshes.rst | 2 +- idl/SMESH_Gen.idl | 2 +- src/SMESH/SMESH_Mesh.cxx | 2 +- src/SMESH/SMESH_MeshEditor.cxx | 4 +- src/SMESH/SMESH_MesherHelper.cxx | 2 +- src/SMESHGUI/SMESHGUI.cxx | 74 +++++++++---------- src/SMESH_I/SMESH_2smeshpy.hxx | 2 +- src/SMESH_I/SMESH_Pattern_i.cxx | 2 +- src/StdMeshers/StdMeshers_Import_1D.cxx | 6 +- .../MGCleanerPlug/MGCleanerMonPlugDialog.py | 2 +- .../MGCleanerPlug/doc/Generics_params.rst | 2 +- src/Tools/YamsPlug/monYamsPlugDialog.py | 2 +- 16 files changed, 55 insertions(+), 55 deletions(-) diff --git a/doc/salome/examples/generate_flat_elements.py b/doc/salome/examples/generate_flat_elements.py index b81d80155..5dda5bb7a 100644 --- a/doc/salome/examples/generate_flat_elements.py +++ b/doc/salome/examples/generate_flat_elements.py @@ -1,6 +1,6 @@ # Double nodes on groups boundaries -# This example represents an iron cable (a thin cylinder) in a concrete bloc (a big cylinder). +# This example represents an iron cable (a thin cylinder) in a concrete block (a big cylinder). # The big cylinder is defined by two geometric volumes. diff --git a/doc/salome/gui/SMESH/input/about_filters.rst b/doc/salome/gui/SMESH/input/about_filters.rst index 5f3620196..c2cfce9b3 100644 --- a/doc/salome/gui/SMESH/input/about_filters.rst +++ b/doc/salome/gui/SMESH/input/about_filters.rst @@ -10,7 +10,7 @@ Several criteria can be combined together by using logical operators *AND* and * Some filtering criteria use the functionality of :ref:`mesh quality controls ` to filter mesh nodes / elements by specific characteristic (Area, Length, etc). -The functinality of mesh filters is available in both GUI and TUI modes: +The functionality of mesh filters is available in both GUI and TUI modes: * In GUI, filters are available in some dialog boxes via "Set Filters" button, clicking on which opens the :ref:`dialog box ` allowing to specify the list of filter criteria to be applied to the current selection. See :ref:`selection_filter_library_page` page to learn more about selection filters and their usage in GUI. diff --git a/doc/salome/gui/SMESH/input/measurements.rst b/doc/salome/gui/SMESH/input/measurements.rst index 248ea4f02..9fb3cac4f 100644 --- a/doc/salome/gui/SMESH/input/measurements.rst +++ b/doc/salome/gui/SMESH/input/measurements.rst @@ -27,7 +27,7 @@ The following targets are supported: * **Node:** single mesh node; * **Element:** single mesh element (not available in this version); * **Object:** mesh, sub-mesh or group object (not available in this version); -* **Origin:** origin of the global co-ordinate system. +* **Origin:** origin of the global coordinate system. The result will be shown in the bottom area of the dialog. In addition, a simple preview will be shown in the 3D viewer. diff --git a/doc/salome/gui/SMESH/input/mesh_infos.rst b/doc/salome/gui/SMESH/input/mesh_infos.rst index c12109aa5..a93830ded 100644 --- a/doc/salome/gui/SMESH/input/mesh_infos.rst +++ b/doc/salome/gui/SMESH/input/mesh_infos.rst @@ -79,7 +79,7 @@ The user can either input the ID of a node or element he wants to analyze direct If **Show IDs** is activated, IDs of selected nodes or elements are displayed in the 3D viewer. .. note:: - The information about the groups, to which the node or element belongs, can be shown in a short or in a detailed form. By default, for performance rasons, this information is shown in a short form (group names only). The detailed information on groups can be switched on via :ref:`Show details on groups in element information tab ` option of :ref:`mesh_preferences_page`. + The information about the groups, to which the node or element belongs, can be shown in a short or in a detailed form. By default, for performance reasons, this information is shown in a short form (group names only). The detailed information on groups can be switched on via :ref:`Show details on groups in element information tab ` option of :ref:`mesh_preferences_page`. .. _mesh_addition_info_anchor: diff --git a/doc/salome/gui/SMESH/input/tui_modifying_meshes.rst b/doc/salome/gui/SMESH/input/tui_modifying_meshes.rst index 0981dd7af..1509e8d9f 100644 --- a/doc/salome/gui/SMESH/input/tui_modifying_meshes.rst +++ b/doc/salome/gui/SMESH/input/tui_modifying_meshes.rst @@ -308,7 +308,7 @@ If there is no shared faces between the group \#n and the group \#p in the list, All the flat elements are gathered into the group named "joints3D" (or "joints2D" in 2D situation). The flat element of the multiple junctions between the simple junction are stored in a group named "jointsMultiples". -This example represents an iron cable (a thin cylinder) in a concrete bloc (a big cylinder). +This example represents an iron cable (a thin cylinder) in a concrete block (a big cylinder). The big cylinder is defined by two geometric volumes. .. literalinclude:: ../../../examples/generate_flat_elements.py diff --git a/idl/SMESH_Gen.idl b/idl/SMESH_Gen.idl index 69d725c7c..a7e4c5094 100644 --- a/idl/SMESH_Gen.idl +++ b/idl/SMESH_Gen.idl @@ -121,7 +121,7 @@ module SMESH */ struct HypInitParams { - short way; // 0 - by mesh, 1 - by geometry size + prefered parameters, 2 - by averageLength + short way; // 0 - by mesh, 1 - by geometry size + preferred parameters, 2 - by averageLength double averageLength; boolean quadDominated; }; diff --git a/src/SMESH/SMESH_Mesh.cxx b/src/SMESH/SMESH_Mesh.cxx index b5a598f57..9ed363a17 100644 --- a/src/SMESH/SMESH_Mesh.cxx +++ b/src/SMESH/SMESH_Mesh.cxx @@ -1159,7 +1159,7 @@ bool SMESH_Mesh::IsUsedHypothesis(SMESHDS_Hypothesis * anHyp, // algorithm parameter if (algo) { - // look trough hypotheses used by algo + // look through hypotheses used by algo const SMESH_HypoFilter* hypoKind; if (( hypoKind = algo->GetCompatibleHypoFilter( !hyp->IsAuxiliary() ))) { std::list usedHyps; diff --git a/src/SMESH/SMESH_MeshEditor.cxx b/src/SMESH/SMESH_MeshEditor.cxx index 08ea9ca65..e9c672c1e 100644 --- a/src/SMESH/SMESH_MeshEditor.cxx +++ b/src/SMESH/SMESH_MeshEditor.cxx @@ -1927,7 +1927,7 @@ namespace } for ( int variant = 0; variant < nbVariants && method._nbSplits == 0; ++variant ) { - // check method compliancy with adjacent tetras, + // check method compliance with adjacent tetras, // all found splits must be among facets of tetras described by this method method = TSplitMethod( nbTet, connVariants[variant] ); if ( hasAdjacentSplits && method._nbSplits > 0 ) @@ -2126,7 +2126,7 @@ namespace // there are adjacent prism for ( int variant = 0; variant < nbVariants; ++variant ) { - // check method compliancy with adjacent prisms, + // check method compliance with adjacent prisms, // the found prism facets must be among facets of prisms described by current method method._nbSplits = nbSplits; method._nbCorners = 6; diff --git a/src/SMESH/SMESH_MesherHelper.cxx b/src/SMESH/SMESH_MesherHelper.cxx index d17b4e66c..ed97f5cc2 100644 --- a/src/SMESH/SMESH_MesherHelper.cxx +++ b/src/SMESH/SMESH_MesherHelper.cxx @@ -2972,7 +2972,7 @@ bool SMESH_MesherHelper::IsReversedSubMesh (const TopoDS_Face& theFace) if ( !aSubMeshDSFace ) return isReversed; - // find an element on a bounday of theFace + // find an element on a boundary of theFace SMDS_ElemIteratorPtr iteratorElem = aSubMeshDSFace->GetElements(); const SMDS_MeshNode* nn[2]; while ( iteratorElem->more() ) // loop on elements on theFace diff --git a/src/SMESHGUI/SMESHGUI.cxx b/src/SMESHGUI/SMESHGUI.cxx index cc66cba2e..ff88035b1 100644 --- a/src/SMESHGUI/SMESHGUI.cxx +++ b/src/SMESHGUI/SMESHGUI.cxx @@ -2864,7 +2864,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpMeshOrder: case SMESHOp::OpCreateSubMesh: if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified // fall through case SMESHOp::OpCreateMesh: case SMESHOp::OpCompute: @@ -2916,7 +2916,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if ( isStudyLocked() ) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified /*Standard_Boolean aRes; SMESH::SMESH_Mesh_var aMesh = SMESH::IObjectToInterface(IObject); @@ -2948,7 +2948,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if ( isStudyLocked() ) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified EmitSignalDeactivateDialog(); SMESHGUI_MultiEditDlg* aDlg = NULL; @@ -2968,7 +2968,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_SmoothingDlg( this ) )->show(); @@ -2982,7 +2982,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if (isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if (vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_ExtrusionDlg ( this ) )->show(); @@ -2995,7 +2995,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if (isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if (vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_ExtrusionAlongPathDlg( this ) )->show(); @@ -3008,7 +3008,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RevolutionDlg( this ) )->show(); @@ -3023,7 +3023,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if ( isStudyLocked() ) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); @@ -3041,7 +3041,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpCreateGeometryGroup: { if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified startOperation( theCommandID ); break; } @@ -3055,7 +3055,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified EmitSignalDeactivateDialog(); SMESH::SMESH_Mesh_var aMesh = SMESH::SMESH_Mesh::_nil(); @@ -3084,7 +3084,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified EmitSignalDeactivateDialog(); LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr(); @@ -3163,7 +3163,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified EmitSignalDeactivateDialog(); LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr(); @@ -3262,7 +3262,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if ( isStudyLocked() ) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified EmitSignalDeactivateDialog(); @@ -3284,7 +3284,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if ( isStudyLocked() ) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified EmitSignalDeactivateDialog(); SMESHGUI_GroupOpDlg* aDlg = new SMESHGUI_DimGroupDlg( this ); @@ -3298,7 +3298,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if ( isStudyLocked() ) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified EmitSignalDeactivateDialog(); SMESHGUI_FaceGroupsSeparatedByEdgesDlg* aDlg = new SMESHGUI_FaceGroupsSeparatedByEdgesDlg( this ); @@ -3359,7 +3359,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr(); SALOME_ListIO selected; @@ -3406,7 +3406,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified SUIT_OverrideCursor wc; LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr(); @@ -3439,7 +3439,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); SMDSAbs_EntityType type = SMDSEntity_Edge; @@ -3467,7 +3467,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_CreatePolyhedralVolumeDlg( this ) )->show(); @@ -3492,7 +3492,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); SMDSAbs_EntityType type = SMDSEntity_Last; @@ -3525,7 +3525,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RemoveNodesDlg( this ) )->show(); @@ -3540,7 +3540,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RemoveElementsDlg( this ) )->show(); @@ -3556,7 +3556,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified SALOME_ListIO selected; if( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() ) @@ -3597,7 +3597,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified SALOME_ListIO selected; if( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() ) aSel->selectedObjects( selected ); @@ -3638,7 +3638,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RenumberingDlg( this, 0 ) )->show(); @@ -3654,7 +3654,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RenumberingDlg( this, 1 ) )->show(); @@ -3670,7 +3670,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_TranslationDlg( this ) )->show(); @@ -3685,7 +3685,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RotationDlg( this ) )->show(); @@ -3700,7 +3700,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if(vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_SymmetryDlg( this ) )->show(); @@ -3715,7 +3715,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_ScaleDlg( this ) )->show(); @@ -3731,7 +3731,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_OffsetDlg( this ) )->show(); @@ -3747,7 +3747,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if(vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_SewingDlg( this ) )->show(); @@ -3762,7 +3762,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if(vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_MergeDlg( this, 0 ) )->show(); @@ -3777,7 +3777,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if (isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if (vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_MergeDlg( this, 1 ) )->show(); @@ -3790,7 +3790,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpMoveNode: // MAKE MESH PASS THROUGH POINT if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified startOperation( SMESHOp::OpMoveNode ); break; @@ -3798,7 +3798,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if(isStudyLocked()) break; if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_DuplicateNodesDlg( this ) )->show(); @@ -3812,7 +3812,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpElem0DOnElemNodes: // 0D_ON_ALL_NODES if ( warnOnGeomModif() ) - break; // action forbiden as geometry modified + break; // action forbidden as geometry modified startOperation( SMESHOp::OpElem0DOnElemNodes ); break; diff --git a/src/SMESH_I/SMESH_2smeshpy.hxx b/src/SMESH_I/SMESH_2smeshpy.hxx index c8c0a6374..b62e1203f 100644 --- a/src/SMESH_I/SMESH_2smeshpy.hxx +++ b/src/SMESH_I/SMESH_2smeshpy.hxx @@ -422,7 +422,7 @@ protected: std::list myUnusedCommands; std::list myReferredObjs; // maps used to clear commands setting parameters if result of setting is - // discared (e.g. by mesh.Clear()) + // discarded (e.g. by mesh.Clear()) std::map<_AString, std::list > myMeth2Commands; std::map< _pyCommand::TAddr, std::list > myComputeAddr2Cmds; std::list myComputeCmds; diff --git a/src/SMESH_I/SMESH_Pattern_i.cxx b/src/SMESH_I/SMESH_Pattern_i.cxx index fa5b4d552..f540e358d 100644 --- a/src/SMESH_I/SMESH_Pattern_i.cxx +++ b/src/SMESH_I/SMESH_Pattern_i.cxx @@ -114,7 +114,7 @@ SMESH_Pattern_i::SMESH_Pattern_i( SMESH_Gen_i* theGen_i ): CORBA::Boolean SMESH_Pattern_i::LoadFromFile(const char* theFileContents) { - // remove some gabage from the end + // remove some garbage from the end TCollection_AsciiString patternDescription = (char*) theFileContents; int pos = patternDescription.Length(); while (! isdigit( patternDescription.Value( pos ))) diff --git a/src/StdMeshers/StdMeshers_Import_1D.cxx b/src/StdMeshers/StdMeshers_Import_1D.cxx index 32582cc5d..5a9880cd8 100644 --- a/src/StdMeshers/StdMeshers_Import_1D.cxx +++ b/src/StdMeshers/StdMeshers_Import_1D.cxx @@ -693,14 +693,14 @@ namespace // INTERNAL STUFF if ( removeImport ) { - // treate removal of Import algo from subMesh + // treat removal of Import algo from subMesh removeSubmesh( subMesh, (_ListenerData*) data ); } else if ( modifHyp || ( SMESH_subMesh::CLEAN == event && SMESH_subMesh::COMPUTE_EVENT == eventType)) { - // treate modification of ImportSource hypothesis + // treat modification of ImportSource hypothesis clearSubmesh( subMesh, (_ListenerData*) data, /*all=*/false ); } else if ( SMESH_subMesh::CHECK_COMPUTE_STATE == event && @@ -720,7 +720,7 @@ namespace // INTERNAL STUFF d->_computedSubM.insert( *smIt); } } - // Clear _ImportData::_n2n if it's no more useful, i.e. when + // Clear _ImportData::_n2n if it isn't useful anymore, i.e. when // the event is not within mesh.Compute() if ( SMESH_subMesh::ALGO_EVENT == eventType ) clearN2N( subMesh->GetFather() ); diff --git a/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py b/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py index ec87a6f82..553c192dc 100644 --- a/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py +++ b/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py @@ -368,7 +368,7 @@ class MGCleanerMonPlugDialog(Ui_MGCleanerPlugDialog,QWidget): for slig in reversed(text.split(separator)): lig=slig.strip() #print "load ResumeData",lig - if lig=="": continue #skip blanck lines + if lig=="": continue #skip blank lines if lig[0]=="#": break try: tit,value=lig.split("=") diff --git a/src/Tools/MGCleanerPlug/doc/Generics_params.rst b/src/Tools/MGCleanerPlug/doc/Generics_params.rst index 8da4e2ae9..16c748dc8 100644 --- a/src/Tools/MGCleanerPlug/doc/Generics_params.rst +++ b/src/Tools/MGCleanerPlug/doc/Generics_params.rst @@ -9,7 +9,7 @@ These options are not meshing options but allow the user to configure control pa - **File** - You can change the file used to store your favorite remeshing hypothesis. see paragraph :ref:`hypothesis-label` for further informations. + You can change the file used to store your favorite remeshing hypothesis. see paragraph :ref:`hypothesis-label` for further information. .. image:: images/Generic.png :align: center diff --git a/src/Tools/YamsPlug/monYamsPlugDialog.py b/src/Tools/YamsPlug/monYamsPlugDialog.py index 01ecff063..f4713f41e 100644 --- a/src/Tools/YamsPlug/monYamsPlugDialog.py +++ b/src/Tools/YamsPlug/monYamsPlugDialog.py @@ -336,7 +336,7 @@ class MonYamsPlugDialog(Ui_YamsPlugDialog,QWidget): for slig in reversed(text.split(separator)): lig=slig.strip() #print "load ResumeData",lig - if lig=="": continue #skip blanck lines + if lig=="": continue #skip blank lines if lig[0]=="#": break try: tit,value=lig.split("=") -- 2.30.2