jfa [Mon, 13 Mar 2006 13:14:40 +0000 (13:14 +0000)]
Fix for bug 11847: SIGSEGV detected after close study.
mzn [Mon, 13 Mar 2006 10:18:53 +0000 (10:18 +0000)]
Fix for bug Bug IPAL11402 ( Group on geometry isn't editable ).
enk [Mon, 13 Mar 2006 10:12:02 +0000 (10:12 +0000)]
Fix for Bug IPAL11836:
Hexahedrons are not restored from MED file
eap [Mon, 13 Mar 2006 08:41:26 +0000 (08:41 +0000)]
bug 11843. Fix python command for SetExpressionFunction()
eap [Fri, 10 Mar 2006 12:58:05 +0000 (12:58 +0000)]
fix MultiConnection2D for quardratic faces
apo [Fri, 10 Mar 2006 11:49:31 +0000 (11:49 +0000)]
Bug PAL11696 - writing a MESH with FAMILY attributes (identifier, value, description
apo [Fri, 10 Mar 2006 11:18:05 +0000 (11:18 +0000)]
To destinguish in what mode (embedded or not) the SMESHDS_Mesh was created
mzn [Fri, 10 Mar 2006 10:03:30 +0000 (10:03 +0000)]
Fix for bug PAL11541 (see Additional Comments From Roman Nikolaev 2006-03-10 08:11).
enk [Fri, 10 Mar 2006 08:41:56 +0000 (08:41 +0000)]
Fix for Bug IPAL11830:
Incorrect title of the warning dialog box
nds [Fri, 10 Mar 2006 08:32:04 +0000 (08:32 +0000)]
Canges in configure scripts.
eap [Thu, 9 Mar 2006 15:41:08 +0000 (15:41 +0000)]
bug 11389. Fix ordering of commands
eap [Thu, 9 Mar 2006 12:24:34 +0000 (12:24 +0000)]
minor changes
eap [Thu, 9 Mar 2006 12:24:03 +0000 (12:24 +0000)]
take care of uv of nodes on edges on a seam edge
eap [Thu, 9 Mar 2006 12:22:29 +0000 (12:22 +0000)]
fix centroidal smoothing of quadratic elements
eap [Thu, 9 Mar 2006 10:54:14 +0000 (10:54 +0000)]
make IndexToShape() const
eap [Thu, 9 Mar 2006 09:47:32 +0000 (09:47 +0000)]
fix free edges for quadratic mesh
enk [Thu, 9 Mar 2006 08:58:35 +0000 (08:58 +0000)]
Fixed Bug IPAL10680:
Selection of element stay in the 3D Viewer and dialog box after Apply for Patter Mapping
nds [Thu, 9 Mar 2006 07:08:28 +0000 (07:08 +0000)]
Changed in configuration scripts
nds [Thu, 9 Mar 2006 07:01:02 +0000 (07:01 +0000)]
Changes in Salome configuration scripts
apo [Tue, 7 Mar 2006 14:25:02 +0000 (14:25 +0000)]
To miss internal triangulation for representation of the quadratic mesh elements
enk [Tue, 7 Mar 2006 12:11:17 +0000 (12:11 +0000)]
Fixed Bug IPAL11054:
Application crashes if you set "-8" as f(t) in "Exponent" mode in "Hypothesis Construction"
eap [Tue, 7 Mar 2006 10:51:41 +0000 (10:51 +0000)]
bug 11812. Return nb of found hypothesis from GetHypotheses()
eap [Tue, 7 Mar 2006 10:50:04 +0000 (10:50 +0000)]
bug 11812. Fix Init()
apo [Tue, 7 Mar 2006 09:31:03 +0000 (09:31 +0000)]
Restore more precise signal detection as in SALOME V2.2.7, connected to Bug PAL11170
apo [Tue, 7 Mar 2006 07:23:30 +0000 (07:23 +0000)]
Apply additional improvement of the performance in case of usage of the SMESH module in the embedded mode
apo [Tue, 7 Mar 2006 06:58:40 +0000 (06:58 +0000)]
To compile SMESHGUI_Hypotheses.h by MOC
eap [Mon, 6 Mar 2006 13:36:18 +0000 (13:36 +0000)]
Merge from OCC_Quadric_Mesh_2006
jfa [Mon, 6 Mar 2006 13:18:20 +0000 (13:18 +0000)]
Fix bug 10020. Now NumberOfSegments hypothesis allow scale distribution with scale factor = 1.
enk [Mon, 6 Mar 2006 12:18:17 +0000 (12:18 +0000)]
Fix for Bug IPAL10464:
SMESH: Add Polyhedron (Problem5)
eap [Mon, 6 Mar 2006 10:59:20 +0000 (10:59 +0000)]
hypothesis for quadratic elements creation
eap [Mon, 6 Mar 2006 10:56:57 +0000 (10:56 +0000)]
quadratic elements creation
eap [Mon, 6 Mar 2006 10:54:50 +0000 (10:54 +0000)]
icons for quadratic elements creation
eap [Mon, 6 Mar 2006 10:43:19 +0000 (10:43 +0000)]
Add classes for quadratic elements generation
eap [Mon, 6 Mar 2006 10:33:03 +0000 (10:33 +0000)]
Add dlg adding quadratic elements
apo [Fri, 3 Mar 2006 14:25:21 +0000 (14:25 +0000)]
To improve SALOME signal handling.
Connected to the following bugs.
Bug IPAL11670
CRASH after trying to import "polygones.med" and "recall_bord.med".
Bug PAL11170
SIGSEGV when "extrusion along a path" gives no result
apo [Fri, 3 Mar 2006 08:54:22 +0000 (08:54 +0000)]
To compile binary file
apo [Fri, 3 Mar 2006 06:40:04 +0000 (06:40 +0000)]
To compile binary file
mzn [Thu, 2 Mar 2006 12:45:45 +0000 (12:45 +0000)]
Fix for bug IPAL11705 ( problems with "import SMESH_GroupLyingOnGeom" ).
enk [Thu, 2 Mar 2006 11:42:33 +0000 (11:42 +0000)]
Fix for Bug IPAL10129:
Values in "Change Clipping" dialog box are not taken by "Ok" or "Apply"
apo [Thu, 2 Mar 2006 10:03:01 +0000 (10:03 +0000)]
Apply SMESH module performance improvement
srn [Mon, 27 Feb 2006 14:10:42 +0000 (14:10 +0000)]
TEMPORARY solution! Added a linkage to SalomeDS
apo [Mon, 27 Feb 2006 13:09:57 +0000 (13:09 +0000)]
Fix for Bug IPAL11676 - Performance regression of 'generate frames' in animation
mkr [Mon, 27 Feb 2006 12:16:20 +0000 (12:16 +0000)]
Fix for PAL11733 ( version arg of the ExportToMED method ) for Salome development version.
enk [Mon, 27 Feb 2006 08:53:17 +0000 (08:53 +0000)]
Fix for Bug IPAL10464:
SMESH: Add Polyhedron
mzn [Thu, 23 Feb 2006 14:42:40 +0000 (14:42 +0000)]
Fix for bug PAL11541 ( With Gnome and Xfce, some dialog boxes appear at the bottom-right corner of the Salome window ).
jfa [Tue, 21 Feb 2006 08:52:26 +0000 (08:52 +0000)]
PAL11563: Naming Policy. Export to MED groups with duplicated names forbidden: ask user whether to rename automatically or cancel exporting.
jfa [Tue, 21 Feb 2006 07:38:30 +0000 (07:38 +0000)]
PAL11563: Naming Policy. Add method HasDuplicatedGroupNamesMED() to check group names on duplications before export to MED.
jfa [Tue, 21 Feb 2006 07:37:57 +0000 (07:37 +0000)]
PAL11563: Naming Policy. 1. Add method HasDuplicatedGroupNamesMED() to check group names on duplications before export to MED. 2. Provide unique group names when passing data to MED writer.
jfa [Mon, 20 Feb 2006 11:53:55 +0000 (11:53 +0000)]
PAL11563: Naming Policy. Suppress renaming to blank names.
enk [Fri, 17 Feb 2006 08:53:33 +0000 (08:53 +0000)]
Fix for Bug IPAL11592:
There is incorrect behavior of "Origin & Size" entry fields in "Preferences".
eap [Thu, 16 Feb 2006 13:47:31 +0000 (13:47 +0000)]
PAL11200. fix Deflection1D example
eap [Thu, 16 Feb 2006 13:45:40 +0000 (13:45 +0000)]
PAL11200. SMESH::HYP_BAD_SUBSHAPE status added
eap [Thu, 16 Feb 2006 13:43:27 +0000 (13:43 +0000)]
PAL11200. SMESH_Hypothesis::HYP_BAD_SUBSHAPE status added
eap [Thu, 16 Feb 2006 13:01:00 +0000 (13:01 +0000)]
PAL11200. do not return NULL submeshes from getSubmeshes()
jfa [Thu, 16 Feb 2006 12:30:40 +0000 (12:30 +0000)]
PAL11544: Improve memory management: implement and use destructors.
eap [Thu, 16 Feb 2006 08:23:34 +0000 (08:23 +0000)]
PAL11200. Fix deflection case
eap [Thu, 16 Feb 2006 08:21:47 +0000 (08:21 +0000)]
PAL11200. Print diagnostics on failed hypothesis assignation and on hypo definition if computation fails.
Add fineness parameter to "Automatic...lization"
eap [Thu, 16 Feb 2006 08:14:21 +0000 (08:14 +0000)]
PAL11200. Fix empty popup of a submesh on wire
eap [Thu, 16 Feb 2006 08:12:48 +0000 (08:12 +0000)]
PAL11200. Fix for a submesh on a wire
jfa [Wed, 15 Feb 2006 15:46:29 +0000 (15:46 +0000)]
PAL11544: Optimize sub-meshes cleaning on hypothesis modification.
enk [Tue, 14 Feb 2006 09:02:15 +0000 (09:02 +0000)]
Fix for Bug IPAL11555:
The "Origin & Size" values from "Preferences" aren't taken into account for Scalar Bar.
enk [Fri, 10 Feb 2006 07:13:53 +0000 (07:13 +0000)]
Fix for Problem 1 of Bug IPAL10464:
SMESH: Add Polyhedron
eap [Thu, 9 Feb 2006 15:52:49 +0000 (15:52 +0000)]
PAL11200, 11544. optimize setting elements on submeshes
eap [Thu, 9 Feb 2006 15:52:02 +0000 (15:52 +0000)]
PAL11200, 11544. optimize a little
apo [Thu, 9 Feb 2006 13:24:49 +0000 (13:24 +0000)]
To move calling of a virtual method from a constructor to the Init method
jfa [Wed, 8 Feb 2006 09:47:15 +0000 (09:47 +0000)]
Update version to 3.2.0a1
smh [Tue, 7 Feb 2006 15:01:11 +0000 (15:01 +0000)]
Merge from OCC_development_generic_2006
Preparation of 3.2.0a1
jfa [Wed, 28 Dec 2005 09:17:39 +0000 (09:17 +0000)]
Join modifications from branch BR_3_1_0deb
eap [Mon, 26 Dec 2005 10:43:09 +0000 (10:43 +0000)]
PAL10953. Use GUI to create hypothesis from a hypotheses set
eap [Mon, 26 Dec 2005 10:41:53 +0000 (10:41 +0000)]
PAL10953. Make fields of parameters protected
eap [Mon, 26 Dec 2005 10:36:57 +0000 (10:36 +0000)]
PAL10953. Fix GetSubmeshComputed(): there may be elements but no nodes in a submesh
eap [Mon, 26 Dec 2005 10:34:54 +0000 (10:34 +0000)]
PAL10953. Add Fineness parameter to Automatic Length hypothesis
eap [Fri, 23 Dec 2005 10:00:03 +0000 (10:00 +0000)]
PAL10467. Add "Quadrangle Preference" hypothesis for "Quadrangle(Mapping)" algo
eap [Fri, 23 Dec 2005 07:47:36 +0000 (07:47 +0000)]
PAL10494. Add .._STANDARD_RTTI_... in order to build executable
eap [Wed, 21 Dec 2005 08:30:31 +0000 (08:30 +0000)]
PAL10872 (aspect retio not conform with specifications). Add picture for aspect ratio of hexahedron. Remove 2D formular from 3D aspect ratio page
eap [Tue, 20 Dec 2005 13:57:13 +0000 (13:57 +0000)]
fix PAL10974. Call CleanDependants() instead of
RemoveSubMeshElementsAndNodes() before algo->Compute()
eap [Tue, 20 Dec 2005 13:53:23 +0000 (13:53 +0000)]
fix bug PAL10974: add IsReversedSubMesh()
eap [Tue, 20 Dec 2005 11:10:13 +0000 (11:10 +0000)]
fix bug PAL10974: check if SubMeshesComputed() by presence of nodes in submesh.
Restore lost modifications fixing PAL8021.
eap [Mon, 19 Dec 2005 15:30:18 +0000 (15:30 +0000)]
fix bug 10959. Initialize GEOM_Gen if necessary
eap [Mon, 19 Dec 2005 13:14:02 +0000 (13:14 +0000)]
fix bug 10073. Check isVisible() in enterEvent() which unexpectedly comes after accept()
eap [Thu, 15 Dec 2005 09:56:38 +0000 (09:56 +0000)]
PAL10595: unit and coordinate name length must be equal to 16
eap [Thu, 15 Dec 2005 08:38:29 +0000 (08:38 +0000)]
PAL10494 (SMESH python dump uses idl interface). Python dump using TPythonDump tool
eap [Thu, 15 Dec 2005 08:34:25 +0000 (08:34 +0000)]
PAL10494 (SMESH python dump uses idl interface). Python dump converted to smesh.py API, usage of TPythonDump tool
eap [Thu, 15 Dec 2005 07:33:07 +0000 (07:33 +0000)]
PAL10494 (SMESH python dump uses idl interface). Add SMESH_2smeshpy, a converter of IDL API to smesh.py API
eap [Thu, 15 Dec 2005 07:29:27 +0000 (07:29 +0000)]
PAL10494 (SMESH python dump uses idl interface). Add GetAlgorithm() to class Mesh_Algorithm in order to have access to the wrapped mesher
asl [Wed, 14 Dec 2005 07:11:48 +0000 (07:11 +0000)]
PAL10902 - local selection is stay in viewer after "apply" of Modifiction->Orientation operation
asl [Wed, 14 Dec 2005 06:44:19 +0000 (06:44 +0000)]
PAL10810 - "Display", "Erase", "Display only" on root objects
eap [Mon, 12 Dec 2005 15:29:54 +0000 (15:29 +0000)]
PAL10872. Update according to the Nadir Bouhamau specification
eap [Mon, 12 Dec 2005 15:27:19 +0000 (15:27 +0000)]
PAL10872. Image for aspect ratio of a quadrangle
asl [Tue, 6 Dec 2005 12:52:53 +0000 (12:52 +0000)]
Fix of compilation problems on some platforms
mzn [Tue, 6 Dec 2005 12:32:59 +0000 (12:32 +0000)]
Remove unnecessary item.
smh [Mon, 5 Dec 2005 16:31:55 +0000 (16:31 +0000)]
Copyrights update
mkr [Fri, 2 Dec 2005 15:44:02 +0000 (15:44 +0000)]
Fix for bug PAL9227 : SMESH : documentation on group is wrong.
mzn [Fri, 2 Dec 2005 13:04:27 +0000 (13:04 +0000)]
Fix for bug PAL8377 (ExportToMed TUI vs GUI: how to set the value of the boolean "auto_groups"?).
mzn [Fri, 2 Dec 2005 10:52:13 +0000 (10:52 +0000)]
Fix for bug IPAL10313 (It is impossible to select "Start point" from 3D viewer in "Extrusion along a path" dialog box).
jfa [Thu, 1 Dec 2005 14:49:26 +0000 (14:49 +0000)]
PAL10718: Portability gfortran. Fix by Erwan ADAM.
jfa [Thu, 1 Dec 2005 13:22:31 +0000 (13:22 +0000)]
PAL10719: Portability gcc4.0.1. Fix by Erwan ADAM.
asl [Thu, 1 Dec 2005 10:05:38 +0000 (10:05 +0000)]
Improvement: now in rules you can use "canBeDisplayed" parameter. It is true, if current object can be displayed in active viewer. The result of this check is calculated by new virtual method LightApp_Displayer::canBeDisplayed. GEOM, SMESH, VISU overrides it in order to provide information, what object can be displayed in what viewer
mkr [Wed, 30 Nov 2005 14:59:56 +0000 (14:59 +0000)]
Modifications in SMESH Help.
asl [Wed, 30 Nov 2005 12:39:44 +0000 (12:39 +0000)]
PAL10678 - selection is lost after "update"
