Fix typos by Kunda

https://www.salome-platform.org/forum/forum_9/875695368/263950625

diff --git a/doc/salome/examples/generate_flat_elements.py b/doc/salome/examples/generate_flat_elements.py
index b81d80155179a2c85d7036a1003020c1853c5f25..5dda5bb7a68a9785e235ea075cf5cb24a406497f 100644 (file)
--- a/doc/salome/examples/generate_flat_elements.py
+++ b/doc/salome/examples/generate_flat_elements.py
@@ -1,6 +1,6 @@
 # Double nodes on groups boundaries
 
-# This example represents an iron cable (a thin cylinder) in a concrete bloc (a big cylinder).
+# This example represents an iron cable (a thin cylinder) in a concrete block (a big cylinder).
 # The big cylinder is defined by two geometric volumes.
 
 

diff --git a/doc/salome/gui/SMESH/input/about_filters.rst b/doc/salome/gui/SMESH/input/about_filters.rst
index 5f3620196e9f619932606a99fe770cae787d33ac..c2cfce9b35e3ad170c3e261dee927c46cf1fd92e 100644 (file)
--- a/doc/salome/gui/SMESH/input/about_filters.rst
+++ b/doc/salome/gui/SMESH/input/about_filters.rst
@@ -10,7 +10,7 @@ Several criteria can be combined together by using logical operators *AND* and *
 
 Some filtering criteria use the functionality of :ref:`mesh quality controls <quality_page>` to filter mesh nodes / elements by specific characteristic (Area, Length, etc).
 
-The functinality of mesh filters is available in both GUI and TUI modes:
+The functionality of mesh filters is available in both GUI and TUI modes:
 
 * In GUI, filters are available in some dialog boxes via "Set Filters" button, clicking on which opens the :ref:`dialog box <filtering_elements>` allowing to specify the list of filter criteria to be applied to the current selection. See :ref:`selection_filter_library_page` page to learn more about selection filters and their usage in GUI.
 

diff --git a/doc/salome/gui/SMESH/input/measurements.rst b/doc/salome/gui/SMESH/input/measurements.rst
index 248ea4f02a9a7841789d18317151d64467030316..9fb3cac4f3ffff1854859395c721af4c73985023 100644 (file)
--- a/doc/salome/gui/SMESH/input/measurements.rst
+++ b/doc/salome/gui/SMESH/input/measurements.rst
@@ -27,7 +27,7 @@ The following targets are supported:
 * **Node:** single mesh node;
 * **Element:** single mesh element (not available in this version);
 * **Object:** mesh, sub-mesh or group object (not available in this version);
-* **Origin:** origin of the global co-ordinate system.
+* **Origin:** origin of the global coordinate system.
 
 The result will be shown in the bottom area of the dialog. In addition, a simple preview will be shown in the 3D viewer.
 

diff --git a/doc/salome/gui/SMESH/input/mesh_infos.rst b/doc/salome/gui/SMESH/input/mesh_infos.rst
index c12109aa5b913d1f7c861a6ac3127a15a71b6e6d..a93830ded38234740cf0d91a7c7d3c79f3572e5f 100644 (file)
--- a/doc/salome/gui/SMESH/input/mesh_infos.rst
+++ b/doc/salome/gui/SMESH/input/mesh_infos.rst
@@ -79,7 +79,7 @@ The user can either input the ID of a node or element he wants to analyze direct
 If **Show IDs** is activated, IDs of selected nodes or elements are displayed in the 3D viewer.
 
 .. note::
-       The information about the groups, to which the node or element belongs, can be shown in a short or in a detailed form. By default, for performance rasons, this information is shown in a short form (group names only). The detailed information on groups can be switched on via :ref:`Show details on groups in element information tab <group_detail_info_pref>` option of :ref:`mesh_preferences_page`.
+       The information about the groups, to which the node or element belongs, can be shown in a short or in a detailed form. By default, for performance reasons, this information is shown in a short form (group names only). The detailed information on groups can be switched on via :ref:`Show details on groups in element information tab <group_detail_info_pref>` option of :ref:`mesh_preferences_page`.
 
 .. _mesh_addition_info_anchor:
 

diff --git a/doc/salome/gui/SMESH/input/tui_modifying_meshes.rst b/doc/salome/gui/SMESH/input/tui_modifying_meshes.rst
index 0981dd7af4975f30cbb3611700e04a319b239fe6..1509e8d9fd01ce22f733a2a99d415a2b989b698f 100644 (file)
--- a/doc/salome/gui/SMESH/input/tui_modifying_meshes.rst
+++ b/doc/salome/gui/SMESH/input/tui_modifying_meshes.rst
@@ -308,7 +308,7 @@ If there is no shared faces between the group \#n and the group \#p in the list,
 All the flat elements are gathered into the group named "joints3D" (or "joints2D" in 2D situation).
 The flat element of the multiple junctions between the simple junction are stored in a group named "jointsMultiples".
 
-This example represents an iron cable (a thin cylinder) in a concrete bloc (a big cylinder).
+This example represents an iron cable (a thin cylinder) in a concrete block (a big cylinder).
 The big cylinder is defined by two geometric volumes.
 
 .. literalinclude:: ../../../examples/generate_flat_elements.py

diff --git a/idl/SMESH_Gen.idl b/idl/SMESH_Gen.idl
index 69d725c7cc77455e13402400aad211159380e4d8..a7e4c50940d535482525235f37ca4fb35c27e86c 100644 (file)
--- a/idl/SMESH_Gen.idl
+++ b/idl/SMESH_Gen.idl
@@ -121,7 +121,7 @@ module SMESH
    */
   struct HypInitParams
   {
-    short   way; // 0 - by mesh, 1 - by geometry size + prefered parameters, 2 - by averageLength
+    short   way; // 0 - by mesh, 1 - by geometry size + preferred parameters, 2 - by averageLength
     double  averageLength;
     boolean quadDominated;
   };

diff --git a/src/SMESH/SMESH_Mesh.cxx b/src/SMESH/SMESH_Mesh.cxx
index b5a598f5725eafae43203519c2f58ad0fc24e31c..9ed363a17251602bd888c851959075cb107425bb 100644 (file)
--- a/src/SMESH/SMESH_Mesh.cxx
+++ b/src/SMESH/SMESH_Mesh.cxx
@@ -1159,7 +1159,7 @@ bool SMESH_Mesh::IsUsedHypothesis(SMESHDS_Hypothesis * anHyp,
   // algorithm parameter
   if (algo)
   {
-    // look trough hypotheses used by algo
+    // look through hypotheses used by algo
     const SMESH_HypoFilter* hypoKind;
     if (( hypoKind = algo->GetCompatibleHypoFilter( !hyp->IsAuxiliary() ))) {
       std::list <const SMESHDS_Hypothesis * > usedHyps;

diff --git a/src/SMESH/SMESH_MeshEditor.cxx b/src/SMESH/SMESH_MeshEditor.cxx
index 08ea9ca65b799acf347095759972d300cf627577..e9c672c1edecea739e5fd7da0021354a878bf369 100644 (file)
--- a/src/SMESH/SMESH_MeshEditor.cxx
+++ b/src/SMESH/SMESH_MeshEditor.cxx
@@ -1927,7 +1927,7 @@ namespace
       }
       for ( int variant = 0; variant < nbVariants && method._nbSplits == 0; ++variant )
       {
-        // check method compliancy with adjacent tetras,
+        // check method compliance with adjacent tetras,
         // all found splits must be among facets of tetras described by this method
         method = TSplitMethod( nbTet, connVariants[variant] );
         if ( hasAdjacentSplits && method._nbSplits > 0 )
@@ -2126,7 +2126,7 @@ namespace
       // there are adjacent prism
       for ( int variant = 0; variant < nbVariants; ++variant )
       {
-        // check method compliancy with adjacent prisms,
+        // check method compliance with adjacent prisms,
         // the found prism facets must be among facets of prisms described by current method
         method._nbSplits     = nbSplits;
         method._nbCorners    = 6;

diff --git a/src/SMESH/SMESH_MesherHelper.cxx b/src/SMESH/SMESH_MesherHelper.cxx
index d17b4e66c3556441f67e2bef135cc5331ea42237..ed97f5cc202afc547aa077a25315b56ab80eda44 100644 (file)
--- a/src/SMESH/SMESH_MesherHelper.cxx
+++ b/src/SMESH/SMESH_MesherHelper.cxx
@@ -2972,7 +2972,7 @@ bool SMESH_MesherHelper::IsReversedSubMesh (const TopoDS_Face& theFace)
   if ( !aSubMeshDSFace )
     return isReversed;
 
-  // find an element on a bounday of theFace
+  // find an element on a boundary of theFace
   SMDS_ElemIteratorPtr iteratorElem = aSubMeshDSFace->GetElements();
   const SMDS_MeshNode* nn[2];
   while ( iteratorElem->more() ) // loop on elements on theFace

diff --git a/src/SMESHGUI/SMESHGUI.cxx b/src/SMESHGUI/SMESHGUI.cxx
index cc66cba2ebe58818ee95af6213af895c0dbbca43..ff88035b1238d665f0230d67d0da51ea0eed8203 100644 (file)
--- a/src/SMESHGUI/SMESHGUI.cxx
+++ b/src/SMESHGUI/SMESHGUI.cxx
@@ -2864,7 +2864,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
   case SMESHOp::OpMeshOrder:
   case SMESHOp::OpCreateSubMesh:
     if ( warnOnGeomModif() )
-      break; // action forbiden as geometry modified
+      break; // action forbidden as geometry modified
     // fall through
   case SMESHOp::OpCreateMesh:
   case SMESHOp::OpCompute:
@@ -2916,7 +2916,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
       if ( isStudyLocked() )
         break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
 
       /*Standard_Boolean aRes;
       SMESH::SMESH_Mesh_var aMesh = SMESH::IObjectToInterface<SMESH::SMESH_Mesh>(IObject);
@@ -2948,7 +2948,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
       if ( isStudyLocked() )
         break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
 
       EmitSignalDeactivateDialog();
       SMESHGUI_MultiEditDlg* aDlg = NULL;
@@ -2968,7 +2968,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_SmoothingDlg( this ) )->show();
@@ -2982,7 +2982,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if (isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if (vtkwnd) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_ExtrusionDlg ( this ) )->show();
@@ -2995,7 +2995,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if (isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if (vtkwnd) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_ExtrusionAlongPathDlg( this ) )->show();
@@ -3008,7 +3008,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_RevolutionDlg( this ) )->show();
@@ -3023,7 +3023,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
       if ( isStudyLocked() )
         break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if ( vtkwnd )
       {
         EmitSignalDeactivateDialog();
@@ -3041,7 +3041,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
   case SMESHOp::OpCreateGeometryGroup:
     {
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       startOperation( theCommandID );
       break;
     }
@@ -3055,7 +3055,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
 
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       EmitSignalDeactivateDialog();
       SMESH::SMESH_Mesh_var aMesh = SMESH::SMESH_Mesh::_nil();
 
@@ -3084,7 +3084,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
 
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       EmitSignalDeactivateDialog();
 
       LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
@@ -3163,7 +3163,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
 
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       EmitSignalDeactivateDialog();
 
       LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
@@ -3262,7 +3262,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
       if ( isStudyLocked() )
         break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
 
       EmitSignalDeactivateDialog();
 
@@ -3284,7 +3284,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
       if ( isStudyLocked() )
         break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
 
       EmitSignalDeactivateDialog();
       SMESHGUI_GroupOpDlg* aDlg = new SMESHGUI_DimGroupDlg( this );
@@ -3298,7 +3298,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
       if ( isStudyLocked() )
         break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
 
       EmitSignalDeactivateDialog();
       SMESHGUI_FaceGroupsSeparatedByEdgesDlg* aDlg = new SMESHGUI_FaceGroupsSeparatedByEdgesDlg( this );
@@ -3359,7 +3359,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
 
       LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
       SALOME_ListIO selected;
@@ -3406,7 +3406,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       SUIT_OverrideCursor wc;
 
       LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
@@ -3439,7 +3439,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if ( vtkwnd ) {
         EmitSignalDeactivateDialog();
         SMDSAbs_EntityType type = SMDSEntity_Edge;
@@ -3467,7 +3467,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if ( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_CreatePolyhedralVolumeDlg( this ) )->show();
@@ -3492,7 +3492,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if ( vtkwnd ) {
         EmitSignalDeactivateDialog();
         SMDSAbs_EntityType type = SMDSEntity_Last;
@@ -3525,7 +3525,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if ( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_RemoveNodesDlg( this ) )->show();
@@ -3540,7 +3540,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_RemoveElementsDlg( this ) )->show();
@@ -3556,7 +3556,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
 
     if(isStudyLocked()) break;
     if ( warnOnGeomModif() )
-      break; // action forbiden as geometry modified
+      break; // action forbidden as geometry modified
 
     SALOME_ListIO selected;
     if( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() )
@@ -3597,7 +3597,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       SALOME_ListIO selected;
       if( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() )
         aSel->selectedObjects( selected );
@@ -3638,7 +3638,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_RenumberingDlg( this, 0 ) )->show();
@@ -3654,7 +3654,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if ( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_RenumberingDlg( this, 1 ) )->show();
@@ -3670,7 +3670,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if ( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_TranslationDlg( this ) )->show();
@@ -3685,7 +3685,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_RotationDlg( this ) )->show();
@@ -3700,7 +3700,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if(vtkwnd) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_SymmetryDlg( this ) )->show();
@@ -3715,7 +3715,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if ( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_ScaleDlg( this ) )->show();
@@ -3731,7 +3731,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if ( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_OffsetDlg( this ) )->show();
@@ -3747,7 +3747,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if(vtkwnd) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_SewingDlg( this ) )->show();
@@ -3762,7 +3762,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if(vtkwnd) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_MergeDlg( this, 0 ) )->show();
@@ -3777,7 +3777,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if (isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if (vtkwnd) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_MergeDlg( this, 1 ) )->show();
@@ -3790,7 +3790,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
 
   case SMESHOp::OpMoveNode: // MAKE MESH PASS THROUGH POINT
     if ( warnOnGeomModif() )
-      break; // action forbiden as geometry modified
+      break; // action forbidden as geometry modified
     startOperation( SMESHOp::OpMoveNode );
     break;
 
@@ -3798,7 +3798,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
     {
       if(isStudyLocked()) break;
       if ( warnOnGeomModif() )
-        break; // action forbiden as geometry modified
+        break; // action forbidden as geometry modified
       if ( vtkwnd ) {
         EmitSignalDeactivateDialog();
         ( new SMESHGUI_DuplicateNodesDlg( this ) )->show();
@@ -3812,7 +3812,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID )
 
   case SMESHOp::OpElem0DOnElemNodes: // 0D_ON_ALL_NODES
     if ( warnOnGeomModif() )
-      break; // action forbiden as geometry modified
+      break; // action forbidden as geometry modified
     startOperation( SMESHOp::OpElem0DOnElemNodes );
     break;
 

diff --git a/src/SMESH_I/SMESH_2smeshpy.hxx b/src/SMESH_I/SMESH_2smeshpy.hxx
index c8c0a63748e1c2baab2a68514ba3c188b1b6ab18..b62e1203fe49fb91f0443b2bb7d909161fbcebf7 100644 (file)
--- a/src/SMESH_I/SMESH_2smeshpy.hxx
+++ b/src/SMESH_I/SMESH_2smeshpy.hxx
@@ -422,7 +422,7 @@ protected:
   std::list<Handle(_pyCommand)> myUnusedCommands;
   std::list<Handle(_pyObject) > myReferredObjs;
   // maps used to clear commands setting parameters if result of setting is
-  // discared (e.g. by mesh.Clear())
+  // discarded (e.g. by mesh.Clear())
   std::map<_AString, std::list<Handle(_pyCommand)> >            myMeth2Commands;
   std::map< _pyCommand::TAddr, std::list<Handle(_pyCommand) > > myComputeAddr2Cmds;
   std::list<Handle(_pyCommand) >                                myComputeCmds;

diff --git a/src/SMESH_I/SMESH_Pattern_i.cxx b/src/SMESH_I/SMESH_Pattern_i.cxx
index fa5b4d552eb74d709b9bb055e31e8f99ead24862..f540e358de4ce12503c1b0b4e6bdcef217cea5bb 100644 (file)
--- a/src/SMESH_I/SMESH_Pattern_i.cxx
+++ b/src/SMESH_I/SMESH_Pattern_i.cxx
@@ -114,7 +114,7 @@ SMESH_Pattern_i::SMESH_Pattern_i( SMESH_Gen_i* theGen_i ):
 
 CORBA::Boolean SMESH_Pattern_i::LoadFromFile(const char* theFileContents)
 {
-  // remove some gabage from the end
+  // remove some garbage from the end
   TCollection_AsciiString patternDescription = (char*) theFileContents;
   int pos = patternDescription.Length();
   while (! isdigit( patternDescription.Value( pos )))

diff --git a/src/StdMeshers/StdMeshers_Import_1D.cxx b/src/StdMeshers/StdMeshers_Import_1D.cxx
index 32582cc5dcabba10fe07c6c677cd7eb8329956fb..5a9880cd8f4a62aea7dbd6ba35fa866063a5fb63 100644 (file)
--- a/src/StdMeshers/StdMeshers_Import_1D.cxx
+++ b/src/StdMeshers/StdMeshers_Import_1D.cxx
@@ -693,14 +693,14 @@ namespace // INTERNAL STUFF
 
       if ( removeImport )
       {
-        // treate removal of Import algo from subMesh
+        // treat removal of Import algo from subMesh
         removeSubmesh( subMesh, (_ListenerData*) data );
       }
       else if ( modifHyp ||
                 ( SMESH_subMesh::CLEAN         == event &&
                   SMESH_subMesh::COMPUTE_EVENT == eventType))
       {
-        // treate modification of ImportSource hypothesis
+        // treat modification of ImportSource hypothesis
         clearSubmesh( subMesh, (_ListenerData*) data, /*all=*/false );
       }
       else if ( SMESH_subMesh::CHECK_COMPUTE_STATE == event &&
@@ -720,7 +720,7 @@ namespace // INTERNAL STUFF
                 d->_computedSubM.insert( *smIt);
           }
       }
-      // Clear _ImportData::_n2n if it's no more useful, i.e. when
+      // Clear _ImportData::_n2n if it isn't useful anymore, i.e. when
       // the event is not within mesh.Compute()
       if ( SMESH_subMesh::ALGO_EVENT == eventType )
         clearN2N( subMesh->GetFather() );

diff --git a/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py b/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py
index ec87a6f82a00921f1ca228721a0f6f58f90f0bf5..553c192dc8b733f789b98c8f7357879216234730 100644 (file)
--- a/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py
+++ b/src/Tools/MGCleanerPlug/MGCleanerMonPlugDialog.py
@@ -368,7 +368,7 @@ class MGCleanerMonPlugDialog(Ui_MGCleanerPlugDialog,QWidget):
     for slig in reversed(text.split(separator)):
       lig=slig.strip()
       #print "load ResumeData",lig
-      if lig=="": continue #skip blanck lines
+      if lig=="": continue #skip blank lines
       if lig[0]=="#": break
       try:
         tit,value=lig.split("=")

diff --git a/src/Tools/MGCleanerPlug/doc/Generics_params.rst b/src/Tools/MGCleanerPlug/doc/Generics_params.rst
index 8da4e2ae949d06488440cbef8703c053f9e59937..16c748dc897b28be376348c0bc916eb0a632e974 100644 (file)
--- a/src/Tools/MGCleanerPlug/doc/Generics_params.rst
+++ b/src/Tools/MGCleanerPlug/doc/Generics_params.rst
@@ -9,7 +9,7 @@ These options are not meshing options but allow the user to configure control pa
 
 - **File**
 
-  You can change the file used to store your favorite remeshing hypothesis. see paragraph :ref:`hypothesis-label` for further informations.
+  You can change the file used to store your favorite remeshing hypothesis. see paragraph :ref:`hypothesis-label` for further information.
 
 .. image:: images/Generic.png
    :align: center

diff --git a/src/Tools/YamsPlug/monYamsPlugDialog.py b/src/Tools/YamsPlug/monYamsPlugDialog.py
index 01ecff0639af2a20660f00ba407db97d7431b14c..f4713f41ef18e83c198744d9522d568a16196264 100644 (file)
--- a/src/Tools/YamsPlug/monYamsPlugDialog.py
+++ b/src/Tools/YamsPlug/monYamsPlugDialog.py
@@ -336,7 +336,7 @@ class MonYamsPlugDialog(Ui_YamsPlugDialog,QWidget):
     for slig in reversed(text.split(separator)):
       lig=slig.strip()
       #print "load ResumeData",lig
-      if lig=="": continue #skip blanck lines
+      if lig=="": continue #skip blank lines
       if lig[0]=="#": break
       try:
         tit,value=lig.split("=")