return False
return True
+## Private method. Add geom (sub-shape of the main shape) into the study if not yet there
+def AssureGeomPublished(mesh, geom, name=''):
+ if not isinstance( geom, geompyDC.GEOM._objref_GEOM_Object ):
+ return
+ if not geom.IsSame( mesh.geom ) and not geom.GetStudyEntry():
+ ## set the study
+ studyID = mesh.smeshpyD.GetCurrentStudy()._get_StudyId()
+ if studyID != mesh.geompyD.myStudyId:
+ mesh.geompyD.init_geom( mesh.smeshpyD.GetCurrentStudy())
+ ## get a name
+ if not name and geom.GetShapeType() != geompyDC.GEOM.COMPOUND:
+ # for all groups SubShapeName() returns "Compound_-1"
+ name = mesh.geompyD.SubShapeName(geom, mesh.geom)
+ if not name:
+ name = "%s_%s"%(geom.GetShapeType(), id(geom)%10000)
+ ## publish
+ mesh.geompyD.addToStudyInFather( mesh.geom, geom, name )
+ return
+
# end of l1_auxiliary
## @}
# @return an object of type SMESH_SubMesh, representing a part of mesh, which lies on the given shape
# @ingroup l2_submeshes
def GetSubMesh(self, geom, name):
- if not geom.IsSame( self.geom ) and not geom.GetStudyEntry():
- ## set the study
- studyID = self.smeshpyD.GetCurrentStudy()._get_StudyId()
- if studyID != self.geompyD.myStudyId:
- self.geompyD.init_geom( self.smeshpyD.GetCurrentStudy())
- ## get a name
- if not name and geom.GetShapeType() != geompyDC.GEOM.COMPOUND:
- # for all groups SubShapeName() returns "Compound_-1"
- name = self.geompyD.SubShapeName(geom, self.geom)
- if not name:
- name = "%s_%s"%(geom.GetShapeType(), id(geom)%10000)
- ## publish
- self.geompyD.addToStudyInFather( self.geom, geom, name )
+ AssureGeomPublished( self, geom, name )
submesh = self.mesh.GetSubMesh( geom, name )
return submesh
salome.sg.updateObjBrowser(1)
## Computes a tetrahedral mesh using AutomaticLength + MEFISTO + NETGEN
- # @param fineness [0,-1] defines mesh fineness
+ # @param fineness [0.0,1.0] defines mesh fineness
# @return True or False
# @ingroup l3_algos_basic
def AutomaticTetrahedralization(self, fineness=0):
return self.Compute()
## Computes an hexahedral mesh using AutomaticLength + Quadrangle + Hexahedron
- # @param fineness [0,-1] defines mesh fineness
+ # @param fineness [0.0, 1.0] defines mesh fineness
# @return True or False
# @ingroup l3_algos_basic
def AutomaticHexahedralization(self, fineness=0):
pass
pass
- ## Creates a mesh group based on the geometric object \a grp
- # and gives a \a name, \n if this parameter is not defined
- # the name is the same as the geometric group name \n
- # Note: Works like GroupOnGeom().
- # @param grp a geometric group, a vertex, an edge, a face or a solid
- # @param name the name of the mesh group
- # @return SMESH_GroupOnGeom
- # @ingroup l2_grps_create
- def Group(self, grp, name=""):
- return self.GroupOnGeom(grp, name)
-
## Deprecated, used only for compatibility! Please, use ExportToMEDX() method instead.
# Exports the mesh in a file in MED format and chooses the \a version of MED format
## allowing to overwrite the file if it exists or add the exported data to its contents
def CreateEmptyGroup(self, elementType, name):
return self.mesh.CreateGroup(elementType, name)
+ ## Creates a mesh group based on the geometric object \a grp
+ # and gives a \a name, \n if this parameter is not defined
+ # the name is the same as the geometric group name \n
+ # Note: Works like GroupOnGeom().
+ # @param grp a geometric group, a vertex, an edge, a face or a solid
+ # @param name the name of the mesh group
+ # @return SMESH_GroupOnGeom
+ # @ingroup l2_grps_create
+ def Group(self, grp, name=""):
+ return self.GroupOnGeom(grp, name)
+
## Creates a mesh group based on the geometrical object \a grp
# and gives a \a name, \n if this parameter is not defined
# the name is the same as the geometrical group name
# @return SMESH_GroupOnGeom
# @ingroup l2_grps_create
def GroupOnGeom(self, grp, name="", typ=None):
+ AssureGeomPublished( self, grp, name )
if name == "":
name = grp.GetName()
-
- if typ == None:
- tgeo = str(grp.GetShapeType())
- if tgeo == "VERTEX":
- typ = NODE
- elif tgeo == "EDGE":
- typ = EDGE
- elif tgeo == "FACE":
- typ = FACE
- elif tgeo == "SOLID":
- typ = VOLUME
- elif tgeo == "SHELL":
- typ = VOLUME
- elif tgeo == "COMPOUND":
- try: # it raises on a compound of compounds
- if len( self.geompyD.GetObjectIDs( grp )) == 0:
- print "Mesh.Group: empty geometric group", GetName( grp )
- return 0
- pass
- except:
- pass
- if grp.GetType() == 37: # GEOMImpl_Types.hxx: #define GEOM_GROUP 37
- # group
- tgeo = self.geompyD.GetType(grp)
- if tgeo == geompyDC.ShapeType["VERTEX"]:
- typ = NODE
- elif tgeo == geompyDC.ShapeType["EDGE"]:
- typ = EDGE
- elif tgeo == geompyDC.ShapeType["FACE"]:
- typ = FACE
- elif tgeo == geompyDC.ShapeType["SOLID"]:
- typ = VOLUME
- pass
- pass
- else:
- # just a compound
- for elemType, shapeType in [[VOLUME,"SOLID"],[FACE,"FACE"],
- [EDGE,"EDGE"],[NODE,"VERTEX"]]:
- if self.geompyD.SubShapeAll(grp,geompyDC.ShapeType[shapeType]):
- typ = elemType
- break
- pass
- pass
- pass
- pass
- if typ == None:
- print "Mesh.Group: bad first argument: expected a group, a vertex, an edge, a face or a solid"
- return 0
+ if not typ:
+ typ = self._groupTypeFromShape( grp )
+ return self.mesh.CreateGroupFromGEOM(typ, name, grp)
+
+ ## Pivate method to get a type of group on geometry
+ def _groupTypeFromShape( self, shape ):
+ tgeo = str(shape.GetShapeType())
+ if tgeo == "VERTEX":
+ typ = NODE
+ elif tgeo == "EDGE":
+ typ = EDGE
+ elif tgeo == "FACE" or tgeo == "SHELL":
+ typ = FACE
+ elif tgeo == "SOLID" or tgeo == "COMPSOLID":
+ typ = VOLUME
+ elif tgeo == "COMPOUND":
+ sub = self.geompyD.SubShapeAll( shape, geompyDC.ShapeType["SHAPE"])
+ if not sub:
+ raise ValueError,"_groupTypeFromShape(): empty geometric group or compound '%s'" % GetName(shape)
+ return self._groupTypeFromShape( sub[0] )
else:
- return self.mesh.CreateGroupFromGEOM(typ, name, grp)
+ raise ValueError, \
+ "_groupTypeFromShape(): invalid geometry '%s'" % GetName(shape)
+ return typ
## Creates a mesh group by the given ids of elements
# @param groupName the name of the mesh group
self.geom = mesh.geom
else:
self.geom = geom
- self.AssureGeomPublished( geom )
+ AssureGeomPublished( mesh, geom )
try:
name = GetName(geom)
pass
TreatHypoStatus( status, algo.GetName(), name, True )
return
- ## Private method. Add geom into the study if not yet there
- def AssureGeomPublished(self, geom, name=''):
- if not isinstance( geom, geompyDC.GEOM._objref_GEOM_Object ):
- return
- if not geom.IsSame( self.mesh.geom ) and not geom.GetStudyEntry():
- ## set the study
- studyID = self.mesh.smeshpyD.GetCurrentStudy()._get_StudyId()
- if studyID != self.mesh.geompyD.myStudyId:
- self.mesh.geompyD.init_geom( self.mesh.smeshpyD.GetCurrentStudy())
- ## get a name
- if not name and geom.GetShapeType() != geompyDC.GEOM.COMPOUND:
- # for all groups SubShapeName() returns "Compound_-1"
- name = self.mesh.geompyD.SubShapeName(geom, self.mesh.geom)
- if not name:
- name = "%s_%s"%(geom.GetShapeType(), id(geom)%10000)
- ## publish
- self.mesh.geompyD.addToStudyInFather( self.mesh.geom, geom, name )
- return
-
def CompareHyp (self, hyp, args):
print "CompareHyp is not implemented for ", self.__class__.__name__, ":", hyp.GetName()
return False
### 0D algorithm
if self.geom is None:
raise RuntimeError, "Attemp to create SegmentAroundVertex_0D algoritm on None shape"
- self.AssureGeomPublished( self.geom )
+ AssureGeomPublished( self.mesh, self.geom )
name = GetName(self.geom)
algo = self.FindAlgorithm("SegmentAroundVertex_0D", self.mesh.smeshpyD)
# @param theConstantSizeDistance : distance until which the mesh size will be kept constant on theFace
# @ingroup l3_hypos_blsurf
def SetAttractorGeom(self, theFace, theAttractor, theStartSize, theEndSize, theInfluenceDistance, theConstantSizeDistance):
- self.AssureGeomPublished( theFace )
- self.AssureGeomPublished( theAttractor )
+ AssureGeomPublished( self.mesh, theFace )
+ AssureGeomPublished( self.mesh, theAttractor )
# Parameter of BLSURF algo
self.Parameters().SetAttractorGeom(theFace, theAttractor, theStartSize, theEndSize, theInfluenceDistance, theConstantSizeDistance)
# @param theFace : face on which the attractor has to be removed
# @ingroup l3_hypos_blsurf
def UnsetAttractorGeom(self, theFace):
- self.AssureGeomPublished( theFace )
+ AssureGeomPublished( self.mesh, theFace )
# Parameter of BLSURF algo
self.Parameters().SetAttractorGeom(theFace)
## To set an enforced vertex given a GEOM vertex, group or compound.
# @ingroup l3_hypos_ghs3dh
def SetEnforcedVertexGeom(self, theVertex, size):
- self.AssureGeomPublished( theVertex )
+ AssureGeomPublished( self.mesh, theVertex )
# Advanced parameter of GHS3D
return self.Parameters().SetEnforcedVertexGeom(theVertex, size)
# Only on meshes w/o geometry
# @ingroup l3_hypos_ghs3dh
def SetEnforcedVertexGeomWithGroup(self, theVertex, size, groupName):
- self.AssureGeomPublished( theVertex )
+ AssureGeomPublished( self.mesh, theVertex )
# Advanced parameter of GHS3D
return self.Parameters().SetEnforcedVertexGeomWithGroup(theVertex, size,groupName)
## To remove an enforced vertex given a GEOM vertex, group or compound.
# @ingroup l3_hypos_ghs3dh
def RemoveEnforcedVertexGeom(self, theVertex):
- self.AssureGeomPublished( theVertex )
+ AssureGeomPublished( self.mesh, theVertex )
# Advanced parameter of GHS3D
return self.Parameters().RemoveEnforcedVertexGeom(theVertex)
# @param UseExisting if ==true - searches for the existing hypothesis created with
# the same parameters, else (default) - creates a new one
def SourceEdge(self, edge, mesh=None, srcV=None, tgtV=None, UseExisting=0):
- self.AssureGeomPublished( edge )
- self.AssureGeomPublished( srcV )
- self.AssureGeomPublished( tgtV )
+ AssureGeomPublished( self.mesh, edge )
+ AssureGeomPublished( self.mesh, srcV )
+ AssureGeomPublished( self.mesh, tgtV )
hyp = self.Hypothesis("ProjectionSource1D", [edge,mesh,srcV,tgtV],
UseExisting=0)
#UseExisting=UseExisting, CompareMethod=self.CompareSourceEdge)
def SourceFace(self, face, mesh=None, srcV1=None, tgtV1=None,
srcV2=None, tgtV2=None, UseExisting=0):
for geom in [ face, srcV1, tgtV1, srcV2, tgtV2 ]:
- self.AssureGeomPublished( geom )
+ AssureGeomPublished( self.mesh, geom )
hyp = self.Hypothesis("ProjectionSource2D", [face,mesh,srcV1,tgtV1,srcV2,tgtV2],
UseExisting=0)
#UseExisting=UseExisting, CompareMethod=self.CompareSourceFace)
def SourceShape3D(self, solid, mesh=0, srcV1=0, tgtV1=0,
srcV2=0, tgtV2=0, UseExisting=0):
for geom in [ solid, srcV1, tgtV1, srcV2, tgtV2 ]:
- self.AssureGeomPublished( geom )
+ AssureGeomPublished( self.mesh, geom )
hyp = self.Hypothesis("ProjectionSource3D",
[solid,mesh,srcV1,tgtV1,srcV2,tgtV2],
UseExisting=0)
if self.algo.GetName() == "Import_2D":
raise ValueError, "algoritm dimension mismatch"
for group in groups:
- self.AssureGeomPublished( group )
+ AssureGeomPublished( self.mesh, group )
hyp = self.Hypothesis("ImportSource1D", [groups, toCopyMesh, toCopyGroups],
UseExisting=UseExisting, CompareMethod=self._compareHyp)
hyp.SetSourceEdges(groups)
if self.algo.GetName() == "Import_1D":
raise ValueError, "algoritm dimension mismatch"
for group in groups:
- self.AssureGeomPublished( group )
+ AssureGeomPublished( self.mesh, group )
hyp = self.Hypothesis("ImportSource2D", [groups, toCopyMesh, toCopyGroups],
UseExisting=UseExisting, CompareMethod=self._compareHyp)
hyp.SetSourceFaces(groups)
