#include "utilities.h"
#include <BRep_Tool.hxx>
+#include <Bnd_B2d.hxx>
+#include <Bnd_B3d.hxx>
+#include <ElCLib.hxx>
#include <GCPnts_AbscissaPoint.hxx>
+#include <Geom2d_Circle.hxx>
+#include <Geom2d_Line.hxx>
+#include <Geom2d_TrimmedCurve.hxx>
#include <GeomAdaptor_Curve.hxx>
+#include <Geom_Circle.hxx>
#include <Geom_Curve.hxx>
+#include <Geom_Line.hxx>
+#include <Geom_TrimmedCurve.hxx>
#include <Precision.hxx>
#include <TopExp.hxx>
#include <TopExp_Explorer.hxx>
gp_XYZ* _plnNorm;
_2NearEdges() { _nodes[0]=_nodes[1]=0; _plnNorm = 0; }
+ void reverse() {
+ std::swap( _nodes[0], _nodes[1] );
+ std::swap( _wgt[0], _wgt[1] );
+ }
};
//--------------------------------------------------------------------------------
/*!
// FACE's WOL, srink on which is forbiden due to algo on the adjacent SOLID
set< TGeomID > _noShrinkFaces;
- // end index in _edges of _LayerEdge's based on EDGE (map key) to
- // FACE (maybe NULL) they are inflated along
- //map< int, TopoDS_Face > _endEdge2Face;
+ // <EDGE to smooth on> to <it's curve>
+ map< TGeomID,Handle(Geom_Curve)> _edge2curve;
// end indices in _edges of _LayerEdge on one shape to smooth
vector< int > _endEdgeToSmooth;
const StdMeshers_ViscousLayers* h=0,
_MeshOfSolid* m=0) :_solid(s), _hyp(h), _proxyMesh(m) {}
~_SolidData();
+
+ Handle(Geom_Curve) CurveForSmooth( const TopoDS_Edge& E,
+ const int iFrom,
+ const int iTo,
+ Handle(Geom_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& helper);
};
//--------------------------------------------------------------------------------
/*!
const double cosin);
void limitStepSize( _SolidData& data, const double minSize);
bool inflate(_SolidData& data);
- bool smoothAndCheck(_SolidData& data, int nbSteps, double & distToIntersection);
+ bool smoothAndCheck(_SolidData& data, const int nbSteps, double & distToIntersection);
+ bool smoothAnalyticEdge( _SolidData& data,
+ const int iFrom,
+ const int iTo,
+ Handle(Geom_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& helper);
bool updateNormals( _SolidData& data, SMESH_MesherHelper& helper );
bool refine(_SolidData& data);
bool shrink();
//================================================================================
bool _ViscousBuilder::smoothAndCheck(_SolidData& data,
- int nbSteps,
+ const int nbSteps,
double & distToIntersection)
{
if ( data._endEdgeToSmooth.empty() )
TGeomID sInd = data._edges[ iBeg ]->_nodes[0]->getshapeId();
if ( data._edges[ iBeg ]->IsOnEdge() )
- {
- dumpFunction(SMESH_Comment("smooth")<<data._index << "_Ed"<<sInd <<"_InfStep"<<nbSteps);
- // smooth on EDGE's
- int step = 0;
- do {
- moved = false;
- for ( int i = iBeg; i < iEnd; ++i )
- {
- moved |= data._edges[i]->SmoothOnEdge(surface, F, helper);
+ { // try a simple solution on an analytic EDGE
+ if ( !smoothAnalyticEdge( data, iBeg, iEnd, surface, F, helper ))
+ {
+ dumpFunction(SMESH_Comment("smooth")<<data._index << "_Ed"<<sInd <<"_InfStep"<<nbSteps);
+ // smooth on EDGE's
+ int step = 0;
+ do {
+ moved = false;
+ for ( int i = iBeg; i < iEnd; ++i )
+ {
+ moved |= data._edges[i]->SmoothOnEdge(surface, F, helper);
+ }
+ dumpCmd( SMESH_Comment("# end step ")<<step);
}
- dumpCmd( SMESH_Comment("# end step ")<<step);
- }
- while ( moved && step++ < 5 );
+ while ( moved && step++ < 5 );
+ //cout << " NB STEPS: " << step << endl;
- dumpFunctionEnd();
+ dumpFunctionEnd();
+ }
}
else
{
double dist;
const SMDS_MeshElement* intFace = 0;
#ifdef __myDEBUG
- const SMDS_MeshElement* *closestFace = 0;
+ const SMDS_MeshElement* closestFace = 0;
int iLE = 0;
#endif
for ( unsigned i = 0; i < data._edges.size(); ++i )
return true;
}
+//================================================================================
+/*!
+ * \brief Return a curve of the EDGE to be used for smoothing and arrange
+ * _LayerEdge's to be in a consequent order
+ */
+//================================================================================
+
+Handle(Geom_Curve) _SolidData::CurveForSmooth( const TopoDS_Edge& E,
+ const int iFrom,
+ const int iTo,
+ Handle(Geom_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& helper)
+{
+ TGeomID eIndex = helper.GetMeshDS()->ShapeToIndex( E );
+
+ map< TGeomID, Handle(Geom_Curve)>::iterator i2curve = _edge2curve.find( eIndex );
+
+ if ( i2curve == _edge2curve.end() )
+ {
+ // sort _LayerEdge's by position on the EDGE
+ {
+ map< double, _LayerEdge* > u2edge;
+ for ( int i = iFrom; i < iTo; ++i )
+ u2edge.insert( make_pair( helper.GetNodeU( E, _edges[i]->_nodes[0] ), _edges[i] ));
+
+ ASSERT( u2edge.size() == iTo - iFrom );
+ map< double, _LayerEdge* >::iterator u2e = u2edge.begin();
+ for ( int i = iFrom; i < iTo; ++i, ++u2e )
+ _edges[i] = u2e->second;
+
+ // set _2neibors according to the new order
+ for ( int i = iFrom; i < iTo-1; ++i )
+ if ( _edges[i]->_2neibors->_nodes[1] != _edges[i+1]->_nodes.back() )
+ _edges[i]->_2neibors->reverse();
+ if ( u2edge.size() > 1 &&
+ _edges[iTo-1]->_2neibors->_nodes[0] != _edges[iTo-2]->_nodes.back() )
+ _edges[iTo-1]->_2neibors->reverse();
+ }
+
+ SMESHDS_SubMesh* smDS = helper.GetMeshDS()->MeshElements( eIndex );
+
+ TopLoc_Location loc; double f,l;
+
+ Handle(Geom_Line) line;
+ Handle(Geom_Circle) circle;
+ bool isLine, isCirc;
+ if ( F.IsNull() ) // 3D case
+ {
+ // check if the EDGE is a line
+ Handle(Geom_Curve) curve = BRep_Tool::Curve( E, loc, f, l);
+ if ( curve->IsKind( STANDARD_TYPE( Geom_TrimmedCurve )))
+ curve = Handle(Geom_TrimmedCurve)::DownCast( curve )->BasisCurve();
+
+ line = Handle(Geom_Line)::DownCast( curve );
+ circle = Handle(Geom_Circle)::DownCast( curve );
+ isLine = (!line.IsNull());
+ isCirc = (!circle.IsNull());
+
+ if ( !isLine && !isCirc ) // Check if the EDGE is close to a line
+ {
+ Bnd_B3d bndBox;
+ SMDS_NodeIteratorPtr nIt = smDS->GetNodes();
+ while ( nIt->more() )
+ bndBox.Add( SMESH_TNodeXYZ( nIt->next() ));
+ gp_XYZ size = bndBox.CornerMax() - bndBox.CornerMin();
+
+ SMESH_TNodeXYZ p0( _edges[iFrom]->_2neibors->_nodes[0] );
+ SMESH_TNodeXYZ p1( _edges[iFrom]->_2neibors->_nodes[1] );
+ const double lineTol = 1e-2 * ( p0 - p1 ).Modulus();
+ for ( int i = 0; i < 3 && !isLine; ++i )
+ isLine = ( size.Coord( i+1 ) <= lineTol );
+ }
+ if ( !isLine && !isCirc && iTo-iFrom > 2) // Check if the EDGE is close to a circle
+ {
+ // TODO
+ }
+ }
+ else // 2D case
+ {
+ // check if the EDGE is a line
+ Handle(Geom2d_Curve) curve = BRep_Tool::CurveOnSurface( E, F, f, l);
+ if ( curve->IsKind( STANDARD_TYPE( Geom2d_TrimmedCurve )))
+ curve = Handle(Geom2d_TrimmedCurve)::DownCast( curve )->BasisCurve();
+
+ Handle(Geom2d_Line) line2d = Handle(Geom2d_Line)::DownCast( curve );
+ Handle(Geom2d_Circle) circle2d = Handle(Geom2d_Circle)::DownCast( curve );
+ isLine = (!line2d.IsNull());
+ isCirc = (!circle2d.IsNull());
+
+ if ( !isLine && !isCirc) // Check if the EDGE is close to a line
+ {
+ Bnd_B2d bndBox;
+ SMDS_NodeIteratorPtr nIt = smDS->GetNodes();
+ while ( nIt->more() )
+ bndBox.Add( helper.GetNodeUV( F, nIt->next() ));
+ gp_XY size = bndBox.CornerMax() - bndBox.CornerMin();
+
+ const double lineTol = 1e-2 * sqrt( bndBox.SquareExtent() );
+ for ( int i = 0; i < 2 && !isLine; ++i )
+ isLine = ( size.Coord( i+1 ) <= lineTol );
+ }
+ if ( !isLine && !isCirc && iTo-iFrom > 2) // Check if the EDGE is close to a circle
+ {
+ // TODO
+ }
+ if ( isLine )
+ {
+ line = new Geom_Line( gp::OX() ); // only type does matter
+ }
+ else if ( isCirc )
+ {
+ gp_Pnt2d p = circle2d->Location();
+ gp_Ax2 ax( gp_Pnt( p.X(), p.Y(), 0), gp::DX());
+ circle = new Geom_Circle( ax, 1.); // only center position does matter
+ }
+ }
+
+ Handle(Geom_Curve)& res = _edge2curve[ eIndex ];
+ if ( isLine )
+ res = line;
+ else if ( isCirc )
+ res = circle;
+
+ return res;
+ }
+ return i2curve->second;
+}
+
+//================================================================================
+/*!
+ * \brief smooth _LayerEdge's on a staight EDGE or circular EDGE
+ */
+//================================================================================
+
+bool _ViscousBuilder::smoothAnalyticEdge( _SolidData& data,
+ const int iFrom,
+ const int iTo,
+ Handle(Geom_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& helper)
+{
+ TopoDS_Shape S = helper.GetSubShapeByNode( data._edges[ iFrom ]->_nodes[0],
+ helper.GetMeshDS());
+ TopoDS_Edge E = TopoDS::Edge( S );
+
+ Handle(Geom_Curve) curve = data.CurveForSmooth( E, iFrom, iTo, surface, F, helper );
+ if ( curve.IsNull() ) return false;
+
+ // compute a relative length of segments
+ vector< double > len( iTo-iFrom+1 );
+ {
+ double curLen, prevLen = len[0] = 1.0;
+ for ( int i = iFrom; i < iTo; ++i )
+ {
+ curLen = prevLen * data._edges[i]->_2neibors->_wgt[0] / data._edges[i]->_2neibors->_wgt[1];
+ len[i-iFrom+1] = len[i-iFrom] + curLen;
+ prevLen = curLen;
+ }
+ }
+
+ if ( curve->IsKind( STANDARD_TYPE( Geom_Line )))
+ {
+ if ( F.IsNull() ) // 3D
+ {
+ SMESH_TNodeXYZ p0( data._edges[iFrom]->_2neibors->_nodes[0]);
+ SMESH_TNodeXYZ p1( data._edges[iTo-1]->_2neibors->_nodes[1]);
+ for ( int i = iFrom; i < iTo; ++i )
+ {
+ double r = len[i-iFrom] / len.back();
+ gp_XYZ newPos = p0 * ( 1. - r ) + p1 * r;
+ data._edges[i]->_pos.back() = newPos;
+ SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( data._edges[i]->_nodes.back() );
+ tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
+ }
+ }
+ else
+ {
+ gp_XY uv0 = helper.GetNodeUV( F, data._edges[iFrom]->_2neibors->_nodes[0]);
+ gp_XY uv1 = helper.GetNodeUV( F, data._edges[iTo-1]->_2neibors->_nodes[1]);
+ for ( int i = iFrom; i < iTo; ++i )
+ {
+ double r = len[i-iFrom] / len.back();
+ gp_XY newUV = uv0 * ( 1. - r ) + uv1 * r;
+ data._edges[i]->_pos.back().SetCoord( newUV.X(), newUV.Y(), 0 );
+
+ gp_Pnt newPos = surface->Value( newUV.X(), newUV.Y() );
+ SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( data._edges[i]->_nodes.back() );
+ tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
+
+ SMDS_FacePosition* pos = static_cast<SMDS_FacePosition*>( tgtNode->GetPosition() );
+ pos->SetUParameter( newUV.X() );
+ pos->SetVParameter( newUV.Y() );
+ }
+ }
+ return true;
+ }
+
+ if ( curve->IsKind( STANDARD_TYPE( Geom_Circle )))
+ {
+ Handle(Geom_Circle) circle = Handle(Geom_Circle)::DownCast( curve );
+ gp_Pnt center3D = circle->Location();
+
+ if ( F.IsNull() ) // 3D
+ {
+ return false; // TODO ???
+ }
+ else // 2D
+ {
+ const gp_XY center( center3D.X(), center3D.Y() );
+
+ gp_XY uv0 = helper.GetNodeUV( F, data._edges[iFrom]->_2neibors->_nodes[0]);
+ gp_XY uvM = helper.GetNodeUV( F, data._edges[iFrom]->_nodes.back());
+ gp_XY uv1 = helper.GetNodeUV( F, data._edges[iTo-1]->_2neibors->_nodes[1]);
+ gp_Vec2d vec0( center, uv0 );
+ gp_Vec2d vecM( center, uvM);
+ gp_Vec2d vec1( center, uv1 );
+ double uLast = vec0.Angle( vec1 ); // -PI - +PI
+ double uMidl = vec0.Angle( vecM );
+ if ( uLast < 0 ) uLast += 2*PI; // 0.0 - 2*PI
+ if ( uMidl < 0 ) uMidl += 2*PI;
+ const bool sense = ( uMidl < uLast );
+ const double radius = 0.5 * ( vec0.Magnitude() + vec1.Magnitude() );
+
+ gp_Ax2d axis( center, vec0 );
+ gp_Circ2d circ ( axis, radius, sense );
+ for ( int i = iFrom; i < iTo; ++i )
+ {
+ double newU = uLast * len[i-iFrom] / len.back();
+ gp_Pnt2d newUV = ElCLib::Value( newU, circ );
+ data._edges[i]->_pos.back().SetCoord( newUV.X(), newUV.Y(), 0 );
+
+ gp_Pnt newPos = surface->Value( newUV.X(), newUV.Y() );
+ SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( data._edges[i]->_nodes.back() );
+ tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
+
+ SMDS_FacePosition* pos = static_cast<SMDS_FacePosition*>( tgtNode->GetPosition() );
+ pos->SetUParameter( newUV.X() );
+ pos->SetVParameter( newUV.Y() );
+ }
+ }
+ return true;
+ }
+
+ return false;
+}
+
//================================================================================
/*!
* \brief Modify normals of _LayerEdge's on EDGE's to avoid intersection with
if ( badNb > 0 )
return error(SMESH_Comment("Can't shrink 2D mesh on face ") << f2sd->first );
}
- // No wrongly shaped faces remain; final smooth. Set node XYZ
- for ( int st = 3; st; --st )
+ // No wrongly shaped faces remain; final smooth. Set node XYZ.
+ // First, find out a needed quality of smoothing (high for quadrangles only)
+ bool highQuality;
+ {
+ const bool hasTria = _mesh->NbTriangles(), hasQuad = _mesh->NbQuadrangles();
+ if ( hasTria != hasQuad )
+ {
+ highQuality = hasQuad;
+ }
+ else
+ {
+ set<int> nbNodesSet;
+ SMDS_ElemIteratorPtr fIt = smDS->GetElements();
+ while ( fIt->more() && nbNodesSet.size() < 2 )
+ nbNodesSet.insert( fIt->next()->NbCornerNodes() );
+ highQuality = ( *nbNodesSet.begin() == 4 );
+ }
+ }
+ for ( int st = highQuality ? 8 : 3; st; --st )
{
dumpFunction(SMESH_Comment("shrinkFace")<<f2sd->first<<"_st"<<++smooStep); // debug
for ( unsigned i = 0; i < nodesToSmooth.size(); ++i )
nodesToSmooth[i].Smooth( badNb,surface,helper,refSign,/*set3D=*/st==1 );
dumpFunctionEnd();
}
- // Set event listener to clear FACE sub-mesh together with SOLID sub-mesh
+ // Set an event listener to clear FACE sub-mesh together with SOLID sub-mesh
_SrinkShapeListener::ToClearSubMeshWithSolid( sm, data._solid );
}// loop on FACES to srink mesh on
