X-Git-Url: http://git.salome-platform.org/gitweb/?p=modules%2Fsmesh.git;a=blobdiff_plain;f=src%2FSMESH_SWIG%2Fsmesh_algorithm.py;fp=src%2FSMESH_SWIG%2Fsmesh_algorithm.py;h=b8c12430e22f397a0e8d6e7fa6b1f9afabd788bd;hp=172dcca74e2a3f9de4b7dcfbcc50a8c697454fae;hb=b7a7d49664daa32e1befb558280e13ed0bde37c9;hpb=e7811c61c3565ada368be484f20e7fcac4a9f2cb diff --git a/src/SMESH_SWIG/smesh_algorithm.py b/src/SMESH_SWIG/smesh_algorithm.py index 172dcca74..b8c12430e 100644 --- a/src/SMESH_SWIG/smesh_algorithm.py +++ b/src/SMESH_SWIG/smesh_algorithm.py @@ -30,7 +30,7 @@ class Mesh_Algorithm: The base class to define meshing algorithms Note: - This class should not be used directly, it is supposed to be sub-classed + This class should not be used directly, it is supposed to be sub-classed for implementing Python API for specific meshing algorithms For each meshing algorithm, a python class inheriting from class %Mesh_Algorithm @@ -38,37 +38,37 @@ class Mesh_Algorithm: it is created by class Mesh (see e.g. class :class:`~StdMeshersBuilder.StdMeshersBuilder_Segment` in StdMeshersBuilder package): - - :code:`meshMethod` attribute defines name of method of class smesh.Mesh by calling which the - python class of algorithm is created; this method is dynamically added to the smesh.Mesh class - in runtime. For example, if in :code:`class MyPlugin_Algorithm` this attribute is defined as - :: + - :code:`meshMethod` attribute defines name of method of class smesh.Mesh by calling which the + python class of algorithm is created; this method is dynamically added to the smesh.Mesh class + in runtime. For example, if in :code:`class MyPlugin_Algorithm` this attribute is defined as + :: - meshMethod = "MyAlgorithm" + meshMethod = "MyAlgorithm" - then an instance of :code:`MyPlugin_Algorithm` can be created by the direct invocation of the function - of smesh.Mesh class: - :: + then an instance of :code:`MyPlugin_Algorithm` can be created by the direct invocation of the function + of smesh.Mesh class: + :: - my_algo = mesh.MyAlgorithm() + my_algo = mesh.MyAlgorithm() - - :code:`algoType` defines type of algorithm and is used mostly to discriminate - algorithms that are created by the same method of class smesh.Mesh. For example, if this attribute - is specified in :code:`MyPlugin_Algorithm` class as - :: + - :code:`algoType` defines type of algorithm and is used mostly to discriminate + algorithms that are created by the same method of class smesh.Mesh. For example, if this attribute + is specified in :code:`MyPlugin_Algorithm` class as + :: - algoType = "MyPLUGIN" + algoType = "MyPLUGIN" - then it's creation code can be: - :: + then it's creation code can be: + :: - my_algo = mesh.MyAlgorithm(algo="MyPLUGIN") + my_algo = mesh.MyAlgorithm(algo="MyPLUGIN") """ def __init__(self): - """ - Private constuctor - """ + """ + Private constuctor + """ self.mesh = None self.geom = None self.subm = None @@ -76,13 +76,13 @@ class Mesh_Algorithm: pass def FindHypothesis (self, hypname, args, CompareMethod, smeshpyD): - """ - Finds a hypothesis in the study by its type name and parameters. - Finds only the hypotheses created in smeshpyD engine. - Returns: - SMESH.SMESH_Hypothesis - """ - study = smeshpyD.GetCurrentStudy() + """ + Finds a hypothesis in the study by its type name and parameters. + Finds only the hypotheses created in smeshpyD engine. + Returns: + SMESH.SMESH_Hypothesis + """ + study = salome.myStudy if not study: return None #to do: find component by smeshpyD object, not by its data type scomp = study.FindComponent(smeshpyD.ComponentDataType()) @@ -123,14 +123,14 @@ class Mesh_Algorithm: return None def FindAlgorithm (self, algoname, smeshpyD): - """ - Finds the algorithm in the study by its type name. - Finds only the algorithms, which have been created in smeshpyD engine. - - Returns: - SMESH.SMESH_Algo - """ - study = smeshpyD.GetCurrentStudy() + """ + Finds the algorithm in the study by its type name. + Finds only the algorithms, which have been created in smeshpyD engine. + + Returns: + SMESH.SMESH_Algo + """ + study = salome.myStudy if not study: return None #to do: find component by smeshpyD object, not by its data type scomp = study.FindComponent(smeshpyD.ComponentDataType()) @@ -168,52 +168,52 @@ class Mesh_Algorithm: return None def GetSubMesh(self): - """ - If the algorithm is global, returns 0; - else returns the submesh associated to this algorithm. - """ + """ + If the algorithm is global, returns 0; + else returns the submesh associated to this algorithm. + """ return self.subm def GetAlgorithm(self): - """ - Returns the wrapped mesher. - """ + """ + Returns the wrapped mesher. + """ return self.algo def GetCompatibleHypothesis(self): - """ - Gets the list of hypothesis that can be used with this algorithm - """ + """ + Gets the list of hypothesis that can be used with this algorithm + """ mylist = [] if self.algo: mylist = self.algo.GetCompatibleHypothesis() return mylist def GetName(self): - """ - Gets the name of the algorithm - """ + """ + Gets the name of the algorithm + """ from salome.smesh.smeshBuilder import GetName return GetName(self.algo) def SetName(self, name): - """ - Sets the name to the algorithm - """ + """ + Sets the name to the algorithm + """ self.mesh.smeshpyD.SetName(self.algo, name) def GetId(self): - """ - Gets the id of the algorithm - """ + """ + Gets the id of the algorithm + """ return self.algo.GetId() def Create(self, mesh, geom, hypo, so="libStdMeshersEngine.so"): - """ - Private method. - """ + """ + Private method. + """ if geom is None and mesh.mesh.HasShapeToMesh(): - raise RuntimeError, "Attempt to create " + hypo + " algorithm on None shape" + raise RuntimeError("Attempt to create " + hypo + " algorithm on None shape") algo = self.FindAlgorithm(hypo, mesh.smeshpyD) if algo is None: algo = mesh.smeshpyD.CreateHypothesis(hypo, so) @@ -222,12 +222,12 @@ class Mesh_Algorithm: return self.algo def Assign(self, algo, mesh, geom): - """ - Private method - """ + """ + Private method + """ from salome.smesh.smeshBuilder import AssureGeomPublished, TreatHypoStatus, GetName if geom is None and mesh.mesh.HasShapeToMesh(): - raise RuntimeError, "Attempt to create " + algo + " algorithm on None shape" + raise RuntimeError("Attempt to create " + algo + " algorithm on None shape") self.mesh = mesh if not geom or geom.IsSame( mesh.geom ): self.geom = mesh.geom @@ -240,7 +240,7 @@ class Mesh_Algorithm: return def CompareHyp (self, hyp, args): - print "CompareHyp is not implemented for ", self.__class__.__name__, ":", hyp.GetName() + print("CompareHyp is not implemented for ", self.__class__.__name__, ":", hyp.GetName()) return False def CompareEqualHyp (self, hyp, args): @@ -248,9 +248,9 @@ class Mesh_Algorithm: def Hypothesis (self, hyp, args=[], so="libStdMeshersEngine.so", UseExisting=0, CompareMethod="", toAdd=True): - """ - Private method - """ + """ + Private method + """ from salome.smesh.smeshBuilder import TreatHypoStatus, GetName hypo = None if UseExisting: @@ -285,9 +285,9 @@ class Mesh_Algorithm: return hypo def MainShapeEntry(self): - """ - Returns entry of the shape to mesh in the study - """ + """ + Returns entry of the shape to mesh in the study + """ if not self.mesh or not self.mesh.GetMesh(): return "" if not self.mesh.GetMesh().HasShapeToMesh(): return "" shape = self.mesh.GetShape() @@ -295,40 +295,40 @@ class Mesh_Algorithm: def ViscousLayers(self, thickness, numberOfLayers, stretchFactor, faces=[], isFacesToIgnore=True, extrMethod=StdMeshers.SURF_OFFSET_SMOOTH ): - """ - Defines "ViscousLayers" hypothesis to give parameters of layers of prisms to build - near mesh boundary. This hypothesis can be used by several 3D algorithms: - NETGEN 3D, MG-Tetra, Hexahedron(i,j,k) - - Parameters: - thickness: total thickness of layers of prisms - numberOfLayers: number of layers of prisms - stretchFactor: factor (>1.0) of growth of layer thickness towards inside of mesh - faces: list of geometrical faces (or their ids). - Viscous layers are either generated on these faces or not, depending on - the value of **isFacesToIgnore** parameter. - isFacesToIgnore: if *True*, the Viscous layers are not generated on the - faces specified by the previous parameter (**faces**). - extrMethod: extrusion method defines how position of new nodes are found during - prism construction and how creation of distorted and intersecting prisms is - prevented. Possible values are: - - - StdMeshers.SURF_OFFSET_SMOOTH (default) method extrudes nodes along normal - to underlying geometrical surface. Smoothing of internal surface of - element layers can be used to avoid creation of invalid prisms. - - StdMeshers.FACE_OFFSET method extrudes nodes along average normal of - surrounding mesh faces till intersection with a neighbor mesh face - translated along its own normal by the layers thickness. Thickness - of layers can be limited to avoid creation of invalid prisms. - - StdMeshers.NODE_OFFSET method extrudes nodes along average normal of - surrounding mesh faces by the layers thickness. Thickness of - layers can be limited to avoid creation of invalid prisms. - """ + """ + Defines "ViscousLayers" hypothesis to give parameters of layers of prisms to build + near mesh boundary. This hypothesis can be used by several 3D algorithms: + NETGEN 3D, MG-Tetra, Hexahedron(i,j,k) + + Parameters: + thickness: total thickness of layers of prisms + numberOfLayers: number of layers of prisms + stretchFactor: factor (>1.0) of growth of layer thickness towards inside of mesh + faces: list of geometrical faces (or their ids). + Viscous layers are either generated on these faces or not, depending on + the value of **isFacesToIgnore** parameter. + isFacesToIgnore: if *True*, the Viscous layers are not generated on the + faces specified by the previous parameter (**faces**). + extrMethod: extrusion method defines how position of new nodes are found during + prism construction and how creation of distorted and intersecting prisms is + prevented. Possible values are: + + - StdMeshers.SURF_OFFSET_SMOOTH (default) method extrudes nodes along normal + to underlying geometrical surface. Smoothing of internal surface of + element layers can be used to avoid creation of invalid prisms. + - StdMeshers.FACE_OFFSET method extrudes nodes along average normal of + surrounding mesh faces till intersection with a neighbor mesh face + translated along its own normal by the layers thickness. Thickness + of layers can be limited to avoid creation of invalid prisms. + - StdMeshers.NODE_OFFSET method extrudes nodes along average normal of + surrounding mesh faces by the layers thickness. Thickness of + layers can be limited to avoid creation of invalid prisms. + """ if not isinstance(self.algo, SMESH._objref_SMESH_3D_Algo): - raise TypeError, "ViscousLayers are supported by 3D algorithms only" + raise TypeError("ViscousLayers are supported by 3D algorithms only") if not "ViscousLayers" in self.GetCompatibleHypothesis(): - raise TypeError, "ViscousLayers are not supported by %s"%self.algo.GetName() + raise TypeError("ViscousLayers are not supported by %s"%self.algo.GetName()) if faces and isinstance( faces, geomBuilder.GEOM._objref_GEOM_Object ): faces = [ faces ] if faces and isinstance( faces[0], geomBuilder.GEOM._objref_GEOM_Object ): @@ -351,26 +351,26 @@ class Mesh_Algorithm: def ViscousLayers2D(self, thickness, numberOfLayers, stretchFactor, edges=[], isEdgesToIgnore=True ): - """ - Defines "ViscousLayers2D" hypothesis to give parameters of layers of quadrilateral - elements to build near mesh boundary. This hypothesis can be used by several 2D algorithms: - NETGEN 2D, NETGEN 1D-2D, Quadrangle (mapping), MEFISTO, MG-CADSurf - - Parameters: - thickness: total thickness of layers of quadrilaterals - numberOfLayers: number of layers - stretchFactor: factor (>1.0) of growth of layer thickness towards inside of mesh - edges: list of geometrical edges (or their ids). - Viscous layers are either generated on these edges or not, depending on - the value of **isEdgesToIgnore** parameter. - isEdgesToIgnore: if *True*, the Viscous layers are not generated on the - edges specified by the previous parameter (**edges**). - """ + """ + Defines "ViscousLayers2D" hypothesis to give parameters of layers of quadrilateral + elements to build near mesh boundary. This hypothesis can be used by several 2D algorithms: + NETGEN 2D, NETGEN 1D-2D, Quadrangle (mapping), MEFISTO, MG-CADSurf + + Parameters: + thickness: total thickness of layers of quadrilaterals + numberOfLayers: number of layers + stretchFactor: factor (>1.0) of growth of layer thickness towards inside of mesh + edges: list of geometrical edges (or their ids). + Viscous layers are either generated on these edges or not, depending on + the value of **isEdgesToIgnore** parameter. + isEdgesToIgnore: if *True*, the Viscous layers are not generated on the + edges specified by the previous parameter (**edges**). + """ if not isinstance(self.algo, SMESH._objref_SMESH_2D_Algo): - raise TypeError, "ViscousLayers2D are supported by 2D algorithms only" + raise TypeError("ViscousLayers2D are supported by 2D algorithms only") if not "ViscousLayers2D" in self.GetCompatibleHypothesis(): - raise TypeError, "ViscousLayers2D are not supported by %s"%self.algo.GetName() + raise TypeError("ViscousLayers2D are not supported by %s"%self.algo.GetName()) if edges and not isinstance( edges, list ) and not isinstance( edges, tuple ): edges = [edges] if edges and isinstance( edges[0], geomBuilder.GEOM._objref_GEOM_Object ): @@ -391,10 +391,10 @@ class Mesh_Algorithm: return hyp def ReversedEdgeIndices(self, reverseList): - """ - Transform a list of either edges or tuples (edge, 1st_vertex_of_edge) - into a list acceptable to SetReversedEdges() of some 1D hypotheses - """ + """ + Transform a list of either edges or tuples (edge, 1st_vertex_of_edge) + into a list acceptable to SetReversedEdges() of some 1D hypotheses + """ from salome.smesh.smeshBuilder import FirstVertexOnCurve resList = [] @@ -403,29 +403,29 @@ class Mesh_Algorithm: if isinstance( i, int ): s = geompy.SubShapes(self.mesh.geom, [i])[0] if s.GetShapeType() != geomBuilder.GEOM.EDGE: - raise TypeError, "Not EDGE index given" + raise TypeError("Not EDGE index given") resList.append( i ) elif isinstance( i, geomBuilder.GEOM._objref_GEOM_Object ): if i.GetShapeType() != geomBuilder.GEOM.EDGE: - raise TypeError, "Not an EDGE given" + raise TypeError("Not an EDGE given") resList.append( geompy.GetSubShapeID(self.mesh.geom, i )) elif len( i ) > 1: e = i[0] v = i[1] if not isinstance( e, geomBuilder.GEOM._objref_GEOM_Object ) or \ not isinstance( v, geomBuilder.GEOM._objref_GEOM_Object ): - raise TypeError, "A list item must be a tuple (edge, 1st_vertex_of_edge)" + raise TypeError("A list item must be a tuple (edge, 1st_vertex_of_edge)") if v.GetShapeType() == geomBuilder.GEOM.EDGE and \ e.GetShapeType() == geomBuilder.GEOM.VERTEX: v,e = e,v if e.GetShapeType() != geomBuilder.GEOM.EDGE or \ v.GetShapeType() != geomBuilder.GEOM.VERTEX: - raise TypeError, "A list item must be a tuple (edge, 1st_vertex_of_edge)" + raise TypeError("A list item must be a tuple (edge, 1st_vertex_of_edge)") vFirst = FirstVertexOnCurve( self.mesh, e ) tol = geompy.Tolerance( vFirst )[-1] if geompy.MinDistance( v, vFirst ) > 1.5*tol: resList.append( geompy.GetSubShapeID(self.mesh.geom, e )) else: - raise TypeError, "Item must be either an edge or tuple (edge, 1st_vertex_of_edge)" + raise TypeError("Item must be either an edge or tuple (edge, 1st_vertex_of_edge)") return resList