X-Git-Url: http://git.salome-platform.org/gitweb/?p=modules%2Fsmesh.git;a=blobdiff_plain;f=src%2FSMESH_SWIG%2FsmeshBuilder.py;h=6cf59af32446d9313fbb24532da89aaf26fd6d8b;hp=98b192177bc72f44baa5b317df4e1c8ab36ca251;hb=1dd2f82c6d43d470c088288248edea674d583eec;hpb=e26ffcc005221f12d4ff91e074c4c8464ca044e4 diff --git a/src/SMESH_SWIG/smeshBuilder.py b/src/SMESH_SWIG/smeshBuilder.py index 98b192177..6cf59af32 100644 --- a/src/SMESH_SWIG/smeshBuilder.py +++ b/src/SMESH_SWIG/smeshBuilder.py @@ -1,4 +1,4 @@ -# Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE # # This library is free software; you can redistribute it and/or # modify it under the terms of the GNU Lesser General Public @@ -161,6 +161,9 @@ SMESH.PointStruct.__init__ = __initPointStruct # Substitute AxisStruct.__init__() to create SMESH.AxisStruct using notebook variables. # Parameters are stored in AxisStruct.parameters attribute def __initAxisStruct(ax,*args): + if len( args ) != 6: + raise RuntimeError,\ + "Bad nb args (%s) passed in SMESH.AxisStruct(x,y,z,dx,dy,dz)"%(len( args )) ax.x, ax.y, ax.z, ax.vx, ax.vy, ax.vz, ax.parameters,hasVars = ParseParameters(*args) pass SMESH.AxisStruct.__init__ = __initAxisStruct @@ -207,12 +210,15 @@ def GetName(obj): raise RuntimeError, "Null or invalid object" ## Prints error message if a hypothesis was not assigned. -def TreatHypoStatus(status, hypName, geomName, isAlgo): +def TreatHypoStatus(status, hypName, geomName, isAlgo, mesh): if isAlgo: hypType = "algorithm" else: hypType = "hypothesis" pass + reason = "" + if hasattr( status, "__getitem__" ): + status,reason = status[0],status[1] if status == HYP_UNKNOWN_FATAL : reason = "for unknown reason" elif status == HYP_INCOMPATIBLE : @@ -229,23 +235,30 @@ def TreatHypoStatus(status, hypName, geomName, isAlgo): elif status == HYP_BAD_SUBSHAPE : reason = "the shape is neither the main one, nor its sub-shape, nor a valid group" elif status == HYP_BAD_GEOMETRY: - reason = "geometry mismatches the expectation of the algorithm" + reason = "the algorithm is not applicable to this geometry" elif status == HYP_HIDDEN_ALGO: reason = "it is hidden by an algorithm of an upper dimension, which generates elements of all dimensions" elif status == HYP_HIDING_ALGO: reason = "it hides algorithms of lower dimensions by generating elements of all dimensions" elif status == HYP_NEED_SHAPE: - reason = "Algorithm can't work without shape" + reason = "algorithm can't work without shape" + elif status == HYP_INCOMPAT_HYPS: + pass else: return - hypName = '"' + hypName + '"' - geomName= '"' + geomName+ '"' - if status < HYP_UNKNOWN_FATAL and not geomName =='""': - print hypName, "was assigned to", geomName,"but", reason - elif not geomName == '""': - print hypName, "was not assigned to",geomName,":", reason + where = geomName + if where: + where = '"%s"' % geomName + if mesh: + meshName = GetName( mesh ) + if meshName and meshName != NO_NAME: + where = '"%s" in "%s"' % ( geomName, meshName ) + if status < HYP_UNKNOWN_FATAL and where: + print '"%s" was assigned to %s but %s' %( hypName, where, reason ) + elif where: + print '"%s" was not assigned to %s : %s' %( hypName, where, reason ) else: - print hypName, "was not assigned:", reason + print '"%s" was not assigned : %s' %( hypName, reason ) pass ## Private method. Add geom (sub-shape of the main shape) into the study if not yet there @@ -383,10 +396,16 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): def init_smesh(self,theStudy,geompyD = None): #print "init_smesh" self.SetCurrentStudy(theStudy,geompyD) - - ## Creates an empty Mesh. This mesh can have an underlying geometry. - # @param obj the Geometrical object on which the mesh is built. If not defined, - # the mesh will have no underlying geometry. + if theStudy: + global notebook + notebook.myStudy = theStudy + + ## Creates a mesh. This can be either an empty mesh, possibly having an underlying geometry, + # or a mesh wrapping a CORBA mesh given as a parameter. + # @param obj either (1) a CORBA mesh (SMESH._objref_SMESH_Mesh) got e.g. by calling + # salome.myStudy.FindObjectID("0:1:2:3").GetObject() or + # (2) a Geometrical object for meshing or + # (3) none. # @param name the name for the new mesh. # @return an instance of Mesh class. # @ingroup l2_construct @@ -450,7 +469,9 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): # @return SMESH.AxisStruct # @ingroup l1_auxiliary def GetAxisStruct(self,theObj): + import GEOM edges = self.geompyD.SubShapeAll( theObj, geomBuilder.geomBuilder.ShapeType["EDGE"] ) + axis = None if len(edges) > 1: vertex1, vertex2 = self.geompyD.SubShapeAll( edges[0], geomBuilder.geomBuilder.ShapeType["VERTEX"] ) vertex3, vertex4 = self.geompyD.SubShapeAll( edges[1], geomBuilder.geomBuilder.ShapeType["VERTEX"] ) @@ -462,14 +483,18 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): v2 = [vertex4[0]-vertex3[0], vertex4[1]-vertex3[1], vertex4[2]-vertex3[2]] normal = [ v1[1]*v2[2]-v2[1]*v1[2], v1[2]*v2[0]-v2[2]*v1[0], v1[0]*v2[1]-v2[0]*v1[1] ] axis = AxisStruct(vertex1[0], vertex1[1], vertex1[2], normal[0], normal[1], normal[2]) - return axis + axis._mirrorType = SMESH.SMESH_MeshEditor.PLANE elif len(edges) == 1: vertex1, vertex2 = self.geompyD.SubShapeAll( edges[0], geomBuilder.geomBuilder.ShapeType["VERTEX"] ) p1 = self.geompyD.PointCoordinates( vertex1 ) p2 = self.geompyD.PointCoordinates( vertex2 ) axis = AxisStruct(p1[0], p1[1], p1[2], p2[0]-p1[0], p2[1]-p1[1], p2[2]-p1[2]) - return axis - return None + axis._mirrorType = SMESH.SMESH_MeshEditor.AXIS + elif theObj.GetShapeType() == GEOM.VERTEX: + x,y,z = self.geompyD.PointCoordinates( theObj ) + axis = AxisStruct( x,y,z, 1,0,0,) + axis._mirrorType = SMESH.SMESH_MeshEditor.POINT + return axis # From SMESH_Gen interface: # ------------------------ @@ -498,7 +523,8 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): #return self.IsEmbeddedMode() return SMESH._objref_SMESH_Gen.IsEmbeddedMode(self) - ## Sets the current study + ## Sets the current study. Calling SetCurrentStudy( None ) allows to + # switch OFF automatic pubilishing in the Study of mesh objects. # @ingroup l1_auxiliary def SetCurrentStudy( self, theStudy, geompyD = None ): #self.SetCurrentStudy(theStudy) @@ -514,6 +540,12 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): notebook = salome_notebook.NoteBook( theStudy ) else: notebook = salome_notebook.NoteBook( salome_notebook.PseudoStudyForNoteBook() ) + if theStudy: + sb = theStudy.NewBuilder() + sc = theStudy.FindComponent("SMESH") + if sc: sb.LoadWith(sc, self) + pass + pass ## Gets the current study # @ingroup l1_auxiliary @@ -573,14 +605,15 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): if error.comment: print "*** CreateMeshesFromGMF() errors:\n", error.comment return Mesh(self, self.geompyD, aSmeshMesh), error - ## Concatenate the given meshes into one mesh. - # @return an instance of Mesh class - # @param meshes the meshes to combine into one mesh + ## Concatenate the given meshes into one mesh. All groups of input meshes will be + # present in the new mesh. + # @param meshes the meshes, sub-meshes and groups to combine into one mesh # @param uniteIdenticalGroups if true, groups with same names are united, else they are renamed - # @param mergeNodesAndElements if true, equal nodes and elements aremerged + # @param mergeNodesAndElements if true, equal nodes and elements are merged # @param mergeTolerance tolerance for merging nodes - # @param allGroups forces creation of groups of all elements + # @param allGroups forces creation of groups corresponding to every input mesh # @param name name of a new mesh + # @return an instance of Mesh class def Concatenate( self, meshes, uniteIdenticalGroups, mergeNodesAndElements = False, mergeTolerance = 1e-5, allGroups = False, name = ""): @@ -605,7 +638,7 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): # pass result of Mesh.GetIDSource( list_of_ids, type ) as meshPart # @param meshName a name of the new mesh # @param toCopyGroups to create in the new mesh groups the copied elements belongs to - # @param toKeepIDs to preserve IDs of the copied elements or not + # @param toKeepIDs to preserve order of the copied elements or not # @return an instance of Mesh class def CopyMesh( self, meshPart, meshName, toCopyGroups=False, toKeepIDs=False): if (isinstance( meshPart, Mesh )): @@ -656,15 +689,17 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): ## Creates a criterion by the given parameters # \n Criterion structures allow to define complex filters by combining them with logical operations (AND / OR) (see example below) - # @param elementType the type of elements(NODE, EDGE, FACE, VOLUME) - # @param CritType the type of criterion (FT_Taper, FT_Area, FT_RangeOfIds, FT_LyingOnGeom etc.) - # @param Compare belongs to {FT_LessThan, FT_MoreThan, FT_EqualTo} + # @param elementType the type of elements(SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) + # @param CritType the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.) + # Type SMESH.FunctorType._items in the Python Console to see all values. + # Note that the items starting from FT_LessThan are not suitable for CritType. + # @param Compare belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo} # @param Threshold the threshold value (range of ids as string, shape, numeric) - # @param UnaryOp FT_LogicalNOT or FT_Undefined - # @param BinaryOp a binary logical operation FT_LogicalAND, FT_LogicalOR or - # FT_Undefined (must be for the last criterion of all criteria) - # @param Tolerance the tolerance used by FT_BelongToGeom, FT_BelongToSurface, - # FT_LyingOnGeom, FT_CoplanarFaces criteria + # @param UnaryOp SMESH.FT_LogicalNOT or SMESH.FT_Undefined + # @param BinaryOp a binary logical operation SMESH.FT_LogicalAND, SMESH.FT_LogicalOR or + # SMESH.FT_Undefined + # @param Tolerance the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface, + # SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces criteria # @return SMESH.Filter.Criterion # # Example of Criteria usage @@ -699,7 +734,7 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): if CritType in [FT_BelongToGeom, FT_BelongToPlane, FT_BelongToGenSurface, FT_BelongToCylinder, FT_LyingOnGeom]: - # Checks that Threshold is GEOM object + # Check that Threshold is GEOM object if isinstance(aThreshold, geomBuilder.GEOM._objref_GEOM_Object): aCriterion.ThresholdStr = GetName(aThreshold) aCriterion.ThresholdID = aThreshold.GetStudyEntry() @@ -708,23 +743,39 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): if not name: name = "%s_%s"%(aThreshold.GetShapeType(), id(aThreshold)%10000) aCriterion.ThresholdID = self.geompyD.addToStudy( aThreshold, name ) - #raise RuntimeError, "Threshold shape must be published" + # or a name of GEOM object + elif isinstance( aThreshold, str ): + aCriterion.ThresholdStr = aThreshold else: - print "Error: The Threshold should be a shape." - return None + raise TypeError, "The Threshold should be a shape." if isinstance(UnaryOp,float): aCriterion.Tolerance = UnaryOp UnaryOp = FT_Undefined pass + elif CritType == FT_BelongToMeshGroup: + # Check that Threshold is a group + if isinstance(aThreshold, SMESH._objref_SMESH_GroupBase): + if aThreshold.GetType() != elementType: + raise ValueError, "Group type mismatches Element type" + aCriterion.ThresholdStr = aThreshold.GetName() + aCriterion.ThresholdID = salome.orb.object_to_string( aThreshold ) + study = self.GetCurrentStudy() + if study: + so = study.FindObjectIOR( aCriterion.ThresholdID ) + if so: + entry = so.GetID() + if entry: + aCriterion.ThresholdID = entry + else: + raise TypeError, "The Threshold should be a Mesh Group" elif CritType == FT_RangeOfIds: - # Checks that Threshold is string + # Check that Threshold is string if isinstance(aThreshold, str): aCriterion.ThresholdStr = aThreshold else: - print "Error: The Threshold should be a string." - return None + raise TypeError, "The Threshold should be a string." elif CritType == FT_CoplanarFaces: - # Checks the Threshold + # Check the Threshold if isinstance(aThreshold, int): aCriterion.ThresholdID = str(aThreshold) elif isinstance(aThreshold, str): @@ -733,10 +784,10 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): raise ValueError, "Invalid ID of mesh face: '%s'"%aThreshold aCriterion.ThresholdID = aThreshold else: - raise ValueError,\ + raise TypeError,\ "The Threshold should be an ID of mesh face and not '%s'"%aThreshold elif CritType == FT_ConnectedElements: - # Checks the Threshold + # Check the Threshold if isinstance(aThreshold, geomBuilder.GEOM._objref_GEOM_Object): # shape aCriterion.ThresholdID = aThreshold.GetStudyEntry() if not aCriterion.ThresholdID: @@ -756,11 +807,11 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): else: aCriterion.ThresholdStr = aThreshold # hope that it's point coordinates else: - raise ValueError,\ + raise TypeError,\ "The Threshold should either a VERTEX, or a node ID, "\ "or a list of point coordinates and not '%s'"%aThreshold elif CritType == FT_ElemGeomType: - # Checks the Threshold + # Check the Threshold try: aCriterion.Threshold = self.EnumToLong(aThreshold) assert( aThreshold in SMESH.GeometryType._items ) @@ -768,12 +819,11 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): if isinstance(aThreshold, int): aCriterion.Threshold = aThreshold else: - print "Error: The Threshold should be an integer or SMESH.GeometryType." - return None + raise TypeError, "The Threshold should be an integer or SMESH.GeometryType." pass pass elif CritType == FT_EntityType: - # Checks the Threshold + # Check the Threshold try: aCriterion.Threshold = self.EnumToLong(aThreshold) assert( aThreshold in SMESH.EntityType._items ) @@ -781,18 +831,16 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): if isinstance(aThreshold, int): aCriterion.Threshold = aThreshold else: - print "Error: The Threshold should be an integer or SMESH.EntityType." - return None + raise TypeError, "The Threshold should be an integer or SMESH.EntityType." pass pass elif CritType == FT_GroupColor: - # Checks the Threshold + # Check the Threshold try: aCriterion.ThresholdStr = self.ColorToString(aThreshold) except: - print "Error: The threshold value should be of SALOMEDS.Color type" - return None + raise TypeError, "The threshold value should be of SALOMEDS.Color type" pass elif CritType in [FT_FreeBorders, FT_FreeEdges, FT_FreeNodes, FT_FreeFaces, FT_LinearOrQuadratic, FT_BadOrientedVolume, @@ -810,7 +858,7 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): aThreshold = float(aThreshold) aCriterion.Threshold = aThreshold except: - print "Error: The Threshold should be a number." + raise TypeError, "The Threshold should be a number." return None if Threshold == FT_LogicalNOT or UnaryOp == FT_LogicalNOT: @@ -828,13 +876,15 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): return aCriterion ## Creates a filter with the given parameters - # @param elementType the type of elements in the group - # @param CritType the type of criterion ( FT_Taper, FT_Area, FT_RangeOfIds, FT_LyingOnGeom etc. ) - # @param Compare belongs to {FT_LessThan, FT_MoreThan, FT_EqualTo} - # @param Threshold the threshold value (range of id ids as string, shape, numeric) - # @param UnaryOp FT_LogicalNOT or FT_Undefined - # @param Tolerance the tolerance used by FT_BelongToGeom, FT_BelongToSurface, - # FT_LyingOnGeom, FT_CoplanarFaces and FT_EqualNodes criteria + # @param elementType the type of elements (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) + # @param CritType the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.) + # Type SMESH.FunctorType._items in the Python Console to see all values. + # Note that the items starting from FT_LessThan are not suitable for CritType. + # @param Compare belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo} + # @param Threshold the threshold value (range of ids as string, shape, numeric) + # @param UnaryOp SMESH.FT_LogicalNOT or SMESH.FT_Undefined + # @param Tolerance the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface, + # SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces and SMESH.FT_EqualNodes criteria # @param mesh the mesh to initialize the filter with # @return SMESH_Filter # @@ -877,7 +927,9 @@ class smeshBuilder(object, SMESH._objref_SMESH_Gen): return aFilter ## Creates a numerical functor by its type - # @param theCriterion FT_...; functor type + # @param theCriterion functor type - an item of SMESH.FunctorType enumeration. + # Type SMESH.FunctorType._items in the Python Console to see all items. + # Note that not all items correspond to numerical functors. # @return SMESH_NumericalFunctor # @ingroup l1_controls def GetFunctor(self,theCriterion): @@ -1212,7 +1264,6 @@ class Mesh: for attrName in dir(self): attr = getattr( self, attrName ) if isinstance( attr, algoCreator ): - #print "algoCreator ", attrName setattr( self, attrName, attr.copy( self )) pass pass @@ -1347,9 +1398,10 @@ class Mesh: # @param discardModifs if True and the mesh has been edited since # a last total re-compute and that may prevent successful partial re-compute, # then the mesh is cleaned before Compute() + # @param refresh if @c True, Object browser is automatically updated (when running in GUI) # @return True or False # @ingroup l2_construct - def Compute(self, geom=0, discardModifs=False): + def Compute(self, geom=0, discardModifs=False, refresh=False): if geom == 0 or not isinstance(geom, geomBuilder.GEOM._objref_GEOM_Object): if self.geom == 0: geom = self.mesh.GetShapeToMesh() @@ -1373,37 +1425,7 @@ class Mesh: # Treat compute errors computeErrors = self.smeshpyD.GetComputeErrors( self.mesh, geom ) for err in computeErrors: - shapeText = "" - if self.mesh.HasShapeToMesh(): - try: - mainIOR = salome.orb.object_to_string(geom) - for sname in salome.myStudyManager.GetOpenStudies(): - s = salome.myStudyManager.GetStudyByName(sname) - if not s: continue - mainSO = s.FindObjectIOR(mainIOR) - if not mainSO: continue - if err.subShapeID == 1: - shapeText = ' on "%s"' % mainSO.GetName() - subIt = s.NewChildIterator(mainSO) - while subIt.More(): - subSO = subIt.Value() - subIt.Next() - obj = subSO.GetObject() - if not obj: continue - go = obj._narrow( geomBuilder.GEOM._objref_GEOM_Object ) - if not go: continue - ids = go.GetSubShapeIndices() - if len(ids) == 1 and ids[0] == err.subShapeID: - shapeText = ' on "%s"' % subSO.GetName() - break - if not shapeText: - shape = self.geompyD.GetSubShape( geom, [err.subShapeID]) - if shape: - shapeText = " on %s #%s" % (shape.GetShapeType(), err.subShapeID) - else: - shapeText = " on subshape #%s" % (err.subShapeID) - except: - shapeText = " on subshape #%s" % (err.subShapeID) + shapeText = " on %s" % self.GetSubShapeName( err.subShapeID ) errText = "" stdErrors = ["OK", #COMPERR_OK "Invalid input mesh", #COMPERR_BAD_INPUT_MESH @@ -1477,44 +1499,134 @@ class Mesh: smeshgui = salome.ImportComponentGUI("SMESH") smeshgui.Init(self.mesh.GetStudyId()) smeshgui.SetMeshIcon( salome.ObjectToID( self.mesh ), ok, (self.NbNodes()==0) ) - salome.sg.updateObjBrowser(1) + if refresh: salome.sg.updateObjBrowser(1) pass return ok - ## Return submesh objects list in meshing order - # @return list of list of submesh objects + ## Return a name of a sub-shape by its ID + # @param subShapeID a unique ID of a sub-shape + # @return a string describing the sub-shape; possible variants: + # - "Face_12" (published sub-shape) + # - FACE #3 (not published sub-shape) + # - sub-shape #3 (invalid sub-shape ID) + # - #3 (error in this function) + def GetSubShapeName(self, subShapeID ): + if not self.mesh.HasShapeToMesh(): + return "" + try: + shapeText = "" + mainIOR = salome.orb.object_to_string( self.GetShape() ) + for sname in salome.myStudyManager.GetOpenStudies(): + s = salome.myStudyManager.GetStudyByName(sname) + if not s: continue + mainSO = s.FindObjectIOR(mainIOR) + if not mainSO: continue + if subShapeID == 1: + shapeText = '"%s"' % mainSO.GetName() + subIt = s.NewChildIterator(mainSO) + while subIt.More(): + subSO = subIt.Value() + subIt.Next() + obj = subSO.GetObject() + if not obj: continue + go = obj._narrow( geomBuilder.GEOM._objref_GEOM_Object ) + if not go: continue + try: + ids = self.geompyD.GetSubShapeID( self.GetShape(), go ) + except: + continue + if ids == subShapeID: + shapeText = '"%s"' % subSO.GetName() + break + if not shapeText: + shape = self.geompyD.GetSubShape( self.GetShape(), [subShapeID]) + if shape: + shapeText = '%s #%s' % (shape.GetShapeType(), subShapeID) + else: + shapeText = 'sub-shape #%s' % (subShapeID) + except: + shapeText = "#%s" % (subShapeID) + return shapeText + + ## Return a list of sub-shapes meshing of which failed, grouped into GEOM groups by + # error of an algorithm + # @param publish if @c True, the returned groups will be published in the study + # @return a list of GEOM groups each named after a failed algorithm + def GetFailedShapes(self, publish=False): + + algo2shapes = {} + computeErrors = self.smeshpyD.GetComputeErrors( self.mesh, self.GetShape() ) + for err in computeErrors: + shape = self.geompyD.GetSubShape( self.GetShape(), [err.subShapeID]) + if not shape: continue + if err.algoName in algo2shapes: + algo2shapes[ err.algoName ].append( shape ) + else: + algo2shapes[ err.algoName ] = [ shape ] + pass + + groups = [] + for algoName, shapes in algo2shapes.items(): + while shapes: + groupType = self.smeshpyD.EnumToLong( shapes[0].GetShapeType() ) + otherTypeShapes = [] + sameTypeShapes = [] + group = self.geompyD.CreateGroup( self.geom, groupType ) + for shape in shapes: + if shape.GetShapeType() == shapes[0].GetShapeType(): + sameTypeShapes.append( shape ) + else: + otherTypeShapes.append( shape ) + self.geompyD.UnionList( group, sameTypeShapes ) + if otherTypeShapes: + group.SetName( "%s %s" % ( algoName, shapes[0].GetShapeType() )) + else: + group.SetName( algoName ) + groups.append( group ) + shapes = otherTypeShapes + pass + if publish: + for group in groups: + self.geompyD.addToStudyInFather( self.geom, group, group.GetName() ) + return groups + + ## Return sub-mesh objects list in meshing order + # @return list of list of sub-meshes # @ingroup l2_construct def GetMeshOrder(self): return self.mesh.GetMeshOrder() - ## Return submesh objects list in meshing order - # @return list of list of submesh objects + ## Set order in which concurrent sub-meshes sould be meshed + # @param submeshes list of sub-meshes # @ingroup l2_construct def SetMeshOrder(self, submeshes): return self.mesh.SetMeshOrder(submeshes) ## Removes all nodes and elements + # @param refresh if @c True, Object browser is automatically updated (when running in GUI) # @ingroup l2_construct - def Clear(self): + def Clear(self, refresh=False): self.mesh.Clear() if ( salome.sg.hasDesktop() and - salome.myStudyManager.GetStudyByID( self.mesh.GetStudyId() )): + salome.myStudyManager.GetStudyByID( self.mesh.GetStudyId() ) ): smeshgui = salome.ImportComponentGUI("SMESH") smeshgui.Init(self.mesh.GetStudyId()) smeshgui.SetMeshIcon( salome.ObjectToID( self.mesh ), False, True ) - salome.sg.updateObjBrowser(1) + if refresh: salome.sg.updateObjBrowser(1) ## Removes all nodes and elements of indicated shape + # @param refresh if @c True, Object browser is automatically updated (when running in GUI) + # @param geomId the ID of a sub-shape to remove elements on # @ingroup l2_construct - def ClearSubMesh(self, geomId): + def ClearSubMesh(self, geomId, refresh=False): self.mesh.ClearSubMesh(geomId) if salome.sg.hasDesktop(): smeshgui = salome.ImportComponentGUI("SMESH") smeshgui.Init(self.mesh.GetStudyId()) smeshgui.SetMeshIcon( salome.ObjectToID( self.mesh ), False, True ) - salome.sg.updateObjBrowser(1) + if refresh: salome.sg.updateObjBrowser(1) - ## Computes a tetrahedral mesh using AutomaticLength + MEFISTO + NETGEN + ## Computes a tetrahedral mesh using AutomaticLength + MEFISTO + Tetrahedron # @param fineness [0.0,1.0] defines mesh fineness # @return True or False # @ingroup l3_algos_basic @@ -1527,8 +1639,7 @@ class Mesh: self.Triangle().LengthFromEdges() pass if dim > 2 : - from salome.NETGENPlugin.NETGENPluginBuilder import NETGEN - self.Tetrahedron(NETGEN) + self.Tetrahedron() pass return self.Compute() @@ -1555,6 +1666,8 @@ class Mesh: # @return SMESH.Hypothesis_Status # @ingroup l2_hypotheses def AddHypothesis(self, hyp, geom=0): + if isinstance( hyp, geomBuilder.GEOM._objref_GEOM_Object ): + hyp, geom = geom, hyp if isinstance( hyp, Mesh_Algorithm ): hyp = hyp.GetAlgorithm() pass @@ -1563,23 +1676,26 @@ class Mesh: if not geom: geom = self.mesh.GetShapeToMesh() pass - hyp_name = hyp.GetName() - lib_name = hyp.GetLibName() - geom_name = "" - if geom: - geom_name = geom.GetName() isApplicable = True - isAlgo = hyp._narrow( SMESH_Algo ) if self.mesh.HasShapeToMesh(): - isApplicable = self.smeshpyD.IsApplicable(hyp_name, lib_name, geom, not geom.IsSame( self.mesh.GetShapeToMesh() ) ) + hyp_type = hyp.GetName() + lib_name = hyp.GetLibName() + checkAll = ( not geom.IsSame( self.mesh.GetShapeToMesh() )) + if checkAll and geom: + checkAll = geom.GetType() == 37 + isApplicable = self.smeshpyD.IsApplicable(hyp_type, lib_name, geom, checkAll) if isApplicable: AssureGeomPublished( self, geom, "shape for %s" % hyp.GetName()) status = self.mesh.AddHypothesis(geom, hyp) - TreatHypoStatus( status, hyp_name, geom_name, isAlgo ) - return status else: - TreatHypoStatus( HYP_BAD_GEOMETRY, hyp_name, geom_name, isAlgo ) - return HYP_BAD_GEOMETRY + status = HYP_BAD_GEOMETRY,"" + hyp_name = GetName( hyp ) + geom_name = "" + if geom: + geom_name = geom.GetName() + isAlgo = hyp._narrow( SMESH_Algo ) + TreatHypoStatus( status, hyp_name, geom_name, isAlgo, self ) + return status ## Return True if an algorithm of hypothesis is assigned to a given shape # @param hyp a hypothesis to check @@ -1649,17 +1765,24 @@ class Mesh: # - 1D if all mesh nodes lie on OX coordinate axis, or # - 2D if all mesh nodes lie on XOY coordinate plane, or # - 3D in the rest cases. - # # If @a autoDimension is @c False, the space dimension is always 3. + # @param fields : list of GEOM fields defined on the shape to mesh. + # @param geomAssocFields : each character of this string means a need to export a + # corresponding field; correspondence between fields and characters is following: + # - 'v' stands for _vertices_ field; + # - 'e' stands for _edges_ field; + # - 'f' stands for _faces_ field; + # - 's' stands for _solids_ field. # @ingroup l2_impexp def ExportMED(self, f, auto_groups=0, version=MED_V2_2, - overwrite=1, meshPart=None, autoDimension=True): - if meshPart: + overwrite=1, meshPart=None, autoDimension=True, fields=[], geomAssocFields=''): + if meshPart or fields or geomAssocFields: unRegister = genObjUnRegister() if isinstance( meshPart, list ): meshPart = self.GetIDSource( meshPart, SMESH.ALL ) unRegister.set( meshPart ) - self.mesh.ExportPartToMED( meshPart, f, auto_groups, version, overwrite, autoDimension) + self.mesh.ExportPartToMED( meshPart, f, auto_groups, version, overwrite, autoDimension, + fields, geomAssocFields) else: self.mesh.ExportToMEDX(f, auto_groups, version, overwrite, autoDimension) @@ -1770,7 +1893,8 @@ class Mesh: # ---------------------- ## Creates an empty mesh group - # @param elementType the type of elements in the group + # @param elementType the type of elements in the group; either of + # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) # @param name the name of the mesh group # @return SMESH_Group # @ingroup l2_grps_create @@ -1793,8 +1917,9 @@ class Mesh: # the name is the same as the geometrical group name # @param grp a geometrical group, a vertex, an edge, a face or a solid # @param name the name of the mesh group - # @param typ the type of elements in the group. If not set, it is - # automatically detected by the type of the geometry + # @param typ the type of elements in the group; either of + # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). If not set, it is + # automatically detected by the type of the geometry # @return SMESH_GroupOnGeom # @ingroup l2_grps_create def GroupOnGeom(self, grp, name="", typ=None): @@ -1829,7 +1954,8 @@ class Mesh: ## Creates a mesh group with given \a name based on the \a filter which ## is a special type of group dynamically updating it's contents during ## mesh modification - # @param typ the type of elements in the group + # @param typ the type of elements in the group; either of + # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). # @param name the name of the mesh group # @param filter the filter defining group contents # @return SMESH_GroupOnFilter @@ -1839,25 +1965,33 @@ class Mesh: ## Creates a mesh group by the given ids of elements # @param groupName the name of the mesh group - # @param elementType the type of elements in the group + # @param elementType the type of elements in the group; either of + # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). # @param elemIDs the list of ids # @return SMESH_Group # @ingroup l2_grps_create def MakeGroupByIds(self, groupName, elementType, elemIDs): group = self.mesh.CreateGroup(elementType, groupName) - group.Add(elemIDs) + if hasattr( elemIDs, "GetIDs" ): + if hasattr( elemIDs, "SetMesh" ): + elemIDs.SetMesh( self.GetMesh() ) + group.AddFrom( elemIDs ) + else: + group.Add(elemIDs) return group ## Creates a mesh group by the given conditions # @param groupName the name of the mesh group - # @param elementType the type of elements in the group - # @param CritType the type of criterion( FT_Taper, FT_Area, FT_RangeOfIds, FT_LyingOnGeom etc. ) - # @param Compare belongs to {FT_LessThan, FT_MoreThan, FT_EqualTo} - # @param Threshold the threshold value (range of id ids as string, shape, numeric) - # @param UnaryOp FT_LogicalNOT or FT_Undefined - # @param Tolerance the tolerance used by FT_BelongToGeom, FT_BelongToSurface, - # FT_LyingOnGeom, FT_CoplanarFaces criteria - # @return SMESH_Group + # @param elementType the type of elements(SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME) + # @param CritType the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.) + # Type SMESH.FunctorType._items in the Python Console to see all values. + # Note that the items starting from FT_LessThan are not suitable for CritType. + # @param Compare belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo} + # @param Threshold the threshold value (range of ids as string, shape, numeric) + # @param UnaryOp SMESH.FT_LogicalNOT or SMESH.FT_Undefined + # @param Tolerance the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface, + # SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces criteria + # @return SMESH_GroupOnFilter # @ingroup l2_grps_create def MakeGroup(self, groupName, @@ -1874,40 +2008,32 @@ class Mesh: ## Creates a mesh group by the given criterion # @param groupName the name of the mesh group # @param Criterion the instance of Criterion class - # @return SMESH_Group + # @return SMESH_GroupOnFilter # @ingroup l2_grps_create def MakeGroupByCriterion(self, groupName, Criterion): - aFilterMgr = self.smeshpyD.CreateFilterManager() - aFilter = aFilterMgr.CreateFilter() - aCriteria = [] - aCriteria.append(Criterion) - aFilter.SetCriteria(aCriteria) - group = self.MakeGroupByFilter(groupName, aFilter) - aFilterMgr.UnRegister() - return group + return self.MakeGroupByCriteria( groupName, [Criterion] ) ## Creates a mesh group by the given criteria (list of criteria) # @param groupName the name of the mesh group # @param theCriteria the list of criteria - # @return SMESH_Group + # @param binOp binary operator used when binary operator of criteria is undefined + # @return SMESH_GroupOnFilter # @ingroup l2_grps_create - def MakeGroupByCriteria(self, groupName, theCriteria): - aFilterMgr = self.smeshpyD.CreateFilterManager() - aFilter = aFilterMgr.CreateFilter() - aFilter.SetCriteria(theCriteria) + def MakeGroupByCriteria(self, groupName, theCriteria, binOp=SMESH.FT_LogicalAND): + aFilter = self.smeshpyD.GetFilterFromCriteria( theCriteria, binOp ) group = self.MakeGroupByFilter(groupName, aFilter) - aFilterMgr.UnRegister() return group ## Creates a mesh group by the given filter # @param groupName the name of the mesh group # @param theFilter the instance of Filter class - # @return SMESH_Group + # @return SMESH_GroupOnFilter # @ingroup l2_grps_create def MakeGroupByFilter(self, groupName, theFilter): - group = self.CreateEmptyGroup(theFilter.GetElementType(), groupName) - theFilter.SetMesh( self.mesh ) - group.AddFrom( theFilter ) + #group = self.CreateEmptyGroup(theFilter.GetElementType(), groupName) + #theFilter.SetMesh( self.mesh ) + #group.AddFrom( theFilter ) + group = self.GroupOnFilter( theFilter.GetElementType(), groupName, theFilter ) return group ## Removes a group @@ -1920,11 +2046,24 @@ class Mesh: def RemoveGroupWithContents(self, group): self.mesh.RemoveGroupWithContents(group) - ## Gets the list of groups existing in the mesh in the order of creation (starting from the oldest one) + ## Gets the list of groups existing in the mesh in the order + # of creation (starting from the oldest one) + # @param elemType type of elements the groups contain; either of + # (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME); + # by default groups of elements of all types are returned # @return a sequence of SMESH_GroupBase # @ingroup l2_grps_create - def GetGroups(self): - return self.mesh.GetGroups() + def GetGroups(self, elemType = SMESH.ALL): + groups = self.mesh.GetGroups() + if elemType == SMESH.ALL: + return groups + typedGroups = [] + for g in groups: + if g.GetType() == elemType: + typedGroups.append( g ) + pass + pass + return typedGroups ## Gets the number of groups existing in the mesh # @return the quantity of groups as an integer value @@ -1942,7 +2081,26 @@ class Mesh: names.append(group.GetName()) return names - ## Produces a union of two groups + ## Finds groups by name and type + # @param name name of the group of interest + # @param elemType type of elements the groups contain; either of + # (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME); + # by default one group of any type of elements is returned + # if elemType == SMESH.ALL then all groups of any type are returned + # @return a list of SMESH_GroupBase's + # @ingroup l2_grps_create + def GetGroupByName(self, name, elemType = None): + groups = [] + for group in self.GetGroups(): + if group.GetName() == name: + if elemType is None: + return [group] + if ( elemType == SMESH.ALL or + group.GetType() == elemType ): + groups.append( group ) + return groups + + ## Produces a union of two groups. # A new group is created. All mesh elements that are # present in the initial groups are added to the new one # @return an instance of SMESH_Group @@ -1950,7 +2108,7 @@ class Mesh: def UnionGroups(self, group1, group2, name): return self.mesh.UnionGroups(group1, group2, name) - ## Produces a union list of groups + ## Produces a union list of groups. # New group is created. All mesh elements that are present in # initial groups are added to the new one # @return an instance of SMESH_Group @@ -1958,7 +2116,7 @@ class Mesh: def UnionListOfGroups(self, groups, name): return self.mesh.UnionListOfGroups(groups, name) - ## Prodices an intersection of two groups + ## Prodices an intersection of two groups. # A new group is created. All mesh elements that are common # for the two initial groups are added to the new one. # @return an instance of SMESH_Group @@ -1966,7 +2124,7 @@ class Mesh: def IntersectGroups(self, group1, group2, name): return self.mesh.IntersectGroups(group1, group2, name) - ## Produces an intersection of groups + ## Produces an intersection of groups. # New group is created. All mesh elements that are present in all # initial groups simultaneously are added to the new one # @return an instance of SMESH_Group @@ -1974,7 +2132,7 @@ class Mesh: def IntersectListOfGroups(self, groups, name): return self.mesh.IntersectListOfGroups(groups, name) - ## Produces a cut of two groups + ## Produces a cut of two groups. # A new group is created. All mesh elements that are present in # the main group but are not present in the tool group are added to the new one # @return an instance of SMESH_Group @@ -1982,22 +2140,36 @@ class Mesh: def CutGroups(self, main_group, tool_group, name): return self.mesh.CutGroups(main_group, tool_group, name) - ## Produces a cut of groups + ## Produces a cut of groups. # A new group is created. All mesh elements that are present in main groups # but do not present in tool groups are added to the new one # @return an instance of SMESH_Group # @ingroup l2_grps_operon def CutListOfGroups(self, main_groups, tool_groups, name): - return self.mesh.CutListOfGroups(main_groups, tool_groups, name) + return self.mesh.CutListOfGroups(main_groups, tool_groups, name) - ## Produces a group of elements of specified type using list of existing groups - # A new group is created. System - # 1) extracts all nodes on which groups elements are built - # 2) combines all elements of specified dimension laying on these nodes + ## + # Create a standalone group of entities basing on nodes of other groups. + # \param groups - list of groups, sub-meshes or filters, of any type. + # \param elemType - a type of elements to include to the new group; either of + # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). + # \param name - a name of the new group. + # \param nbCommonNodes - a criterion of inclusion of an element to the new group + # basing on number of element nodes common with reference \a groups. + # Meaning of possible values are: + # - SMESH.ALL_NODES - include if all nodes are common, + # - SMESH.MAIN - include if all corner nodes are common (meaningful for a quadratic mesh), + # - SMESH.AT_LEAST_ONE - include if one or more node is common, + # - SMEHS.MAJORITY - include if half of nodes or more are common. + # \param underlyingOnly - if \c True (default), an element is included to the + # new group provided that it is based on nodes of one element of \a groups. # @return an instance of SMESH_Group # @ingroup l2_grps_operon - def CreateDimGroup(self, groups, elem_type, name): - return self.mesh.CreateDimGroup(groups, elem_type, name) + def CreateDimGroup(self, groups, elemType, name, + nbCommonNodes = SMESH.ALL_NODES, underlyingOnly = True): + if isinstance( groups, SMESH._objref_SMESH_IDSource ): + groups = [groups] + return self.mesh.CreateDimGroup(groups, elemType, name, nbCommonNodes, underlyingOnly) ## Convert group on geom into standalone group @@ -2065,9 +2237,17 @@ class Mesh: ## Wrap a list of IDs of elements or nodes into SMESH_IDSource which # can be passed as argument to a method accepting mesh, group or sub-mesh + # @param ids list of IDs + # @param elemType type of elements; this parameter is used to distinguish + # IDs of nodes from IDs of elements; by default ids are treated as + # IDs of elements; use SMESH.NODE if ids are IDs of nodes. # @return an instance of SMESH_IDSource + # @warning call UnRegister() for the returned object as soon as it is no more useful: + # idSrc = mesh.GetIDSource( [1,3,5], SMESH.NODE ) + # mesh.DoSomething( idSrc ) + # idSrc.UnRegister() # @ingroup l1_auxiliary - def GetIDSource(self, ids, elemType): + def GetIDSource(self, ids, elemType = SMESH.ALL): return self.editor.MakeIDSource(ids, elemType) @@ -2113,7 +2293,7 @@ class Mesh: ## Returns the number of edges with the given order in the mesh # @param elementOrder the order of elements: - # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC + # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC # @return an integer value # @ingroup l1_meshinfo def NbEdgesOfOrder(self, elementOrder): @@ -2127,7 +2307,7 @@ class Mesh: ## Returns the number of faces with the given order in the mesh # @param elementOrder the order of elements: - # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC + # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC # @return an integer value # @ingroup l1_meshinfo def NbFacesOfOrder(self, elementOrder): @@ -2141,7 +2321,7 @@ class Mesh: ## Returns the number of triangles with the given order in the mesh # @param elementOrder is the order of elements: - # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC + # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC # @return an integer value # @ingroup l1_meshinfo def NbTrianglesOfOrder(self, elementOrder): @@ -2161,7 +2341,7 @@ class Mesh: ## Returns the number of quadrangles with the given order in the mesh # @param elementOrder the order of elements: - # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC + # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC # @return an integer value # @ingroup l1_meshinfo def NbQuadranglesOfOrder(self, elementOrder): @@ -2173,11 +2353,13 @@ class Mesh: def NbBiQuadQuadrangles(self): return self.mesh.NbBiQuadQuadrangles() - ## Returns the number of polygons in the mesh + ## Returns the number of polygons of given order in the mesh + # @param elementOrder the order of elements: + # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC # @return an integer value # @ingroup l1_meshinfo - def NbPolygons(self): - return self.mesh.NbPolygons() + def NbPolygons(self, elementOrder = SMESH.ORDER_ANY): + return self.mesh.NbPolygonsOfOrder(elementOrder) ## Returns the number of volumes in the mesh # @return an integer value @@ -2187,7 +2369,7 @@ class Mesh: ## Returns the number of volumes with the given order in the mesh # @param elementOrder the order of elements: - # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC + # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC # @return an integer value # @ingroup l1_meshinfo def NbVolumesOfOrder(self, elementOrder): @@ -2201,7 +2383,7 @@ class Mesh: ## Returns the number of tetrahedrons with the given order in the mesh # @param elementOrder the order of elements: - # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC + # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC # @return an integer value # @ingroup l1_meshinfo def NbTetrasOfOrder(self, elementOrder): @@ -2215,7 +2397,7 @@ class Mesh: ## Returns the number of hexahedrons with the given order in the mesh # @param elementOrder the order of elements: - # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC + # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC # @return an integer value # @ingroup l1_meshinfo def NbHexasOfOrder(self, elementOrder): @@ -2235,7 +2417,7 @@ class Mesh: ## Returns the number of pyramids with the given order in the mesh # @param elementOrder the order of elements: - # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC + # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC # @return an integer value # @ingroup l1_meshinfo def NbPyramidsOfOrder(self, elementOrder): @@ -2249,7 +2431,7 @@ class Mesh: ## Returns the number of prisms with the given order in the mesh # @param elementOrder the order of elements: - # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC + # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC # @return an integer value # @ingroup l1_meshinfo def NbPrismsOfOrder(self, elementOrder): @@ -2280,7 +2462,8 @@ class Mesh: return self.mesh.GetElementsId() ## Returns the list of IDs of mesh elements with the given type - # @param elementType the required type of elements (SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME) + # @param elementType the required type of elements, either of + # (SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME) # @return list of integer values # @ingroup l1_meshinfo def GetElementsByType(self, elementType): @@ -2297,18 +2480,21 @@ class Mesh: ## Returns the type of mesh element # @return the value from SMESH::ElementType enumeration + # Type SMESH.ElementType._items in the Python Console to see all possible values. # @ingroup l1_meshinfo - def GetElementType(self, id, iselem): + def GetElementType(self, id, iselem=True): return self.mesh.GetElementType(id, iselem) ## Returns the geometric type of mesh element # @return the value from SMESH::EntityType enumeration + # Type SMESH.EntityType._items in the Python Console to see all possible values. # @ingroup l1_meshinfo def GetElementGeomType(self, id): return self.mesh.GetElementGeomType(id) ## Returns the shape type of mesh element - # @return the value from SMESH::GeometryType enumeration + # @return the value from SMESH::GeometryType enumeration. + # Type SMESH.GeometryType._items in the Python Console to see all possible values. # @ingroup l1_meshinfo def GetElementShape(self, id): return self.mesh.GetElementShape(id) @@ -2319,8 +2505,8 @@ class Mesh: # @return the list of integer values # @ingroup l1_meshinfo def GetSubMeshElementsId(self, Shape): - if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)): - ShapeID = Shape.GetSubShapeIndices()[0] + if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object): + ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape ) else: ShapeID = Shape return self.mesh.GetSubMeshElementsId(ShapeID) @@ -2332,7 +2518,7 @@ class Mesh: # @return the list of integer values # @ingroup l1_meshinfo def GetSubMeshNodesId(self, Shape, all): - if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)): + if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object): ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape ) else: ShapeID = Shape @@ -2344,8 +2530,8 @@ class Mesh: # @return element type # @ingroup l1_meshinfo def GetSubMeshElementType(self, Shape): - if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)): - ShapeID = Shape.GetSubShapeIndices()[0] + if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object): + ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape ) else: ShapeID = Shape return self.mesh.GetSubMeshElementType(ShapeID) @@ -2386,24 +2572,22 @@ class Mesh: def GetElementPosition(self,ElemID): return self.mesh.GetElementPosition(ElemID) - ## If the given element is a node, returns the ID of shape - # \n If there is no node for the given ID - returns -1 - # @return an integer value + ## Returns the ID of the shape, on which the given node was generated. + # @return an integer value > 0 or -1 if there is no node for the given + # ID or the node is not assigned to any geometry # @ingroup l1_meshinfo def GetShapeID(self, id): return self.mesh.GetShapeID(id) - ## Returns the ID of the result shape after - # FindShape() from SMESH_MeshEditor for the given element - # \n If there is no element for the given ID - returns -1 - # @return an integer value + ## Returns the ID of the shape, on which the given element was generated. + # @return an integer value > 0 or -1 if there is no element for the given + # ID or the element is not assigned to any geometry # @ingroup l1_meshinfo def GetShapeIDForElem(self,id): return self.mesh.GetShapeIDForElem(id) - ## Returns the number of nodes for the given element - # \n If there is no element for the given ID - returns -1 - # @return an integer value + ## Returns the number of nodes of the given element + # @return an integer value > 0 or -1 if there is no element for the given ID # @ingroup l1_meshinfo def GetElemNbNodes(self, id): return self.mesh.GetElemNbNodes(id) @@ -2428,8 +2612,11 @@ class Mesh: return self.mesh.IsMediumNode(elementID, nodeID) ## Returns true if the given node is the medium node in one of quadratic elements + # @param nodeID ID of the node + # @param elementType the type of elements to check a state of the node, either of + # (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME) # @ingroup l1_meshinfo - def IsMediumNodeOfAnyElem(self, nodeID, elementType): + def IsMediumNodeOfAnyElem(self, nodeID, elementType = SMESH.ALL ): return self.mesh.IsMediumNodeOfAnyElem(nodeID, elementType) ## Returns the number of edges for the given element @@ -2557,7 +2744,7 @@ class Mesh: ## Get measure structure specifying bounding box data of the specified object(s) # @param IDs single source object or list of source objects or list of nodes/elements IDs - # @param isElem if @a objects is a list of IDs, @c True value in this parameters specifies that @a objects are elements, + # @param isElem if @a IDs is a list of IDs, @c True value in this parameters specifies that @a objects are elements, # @c False specifies that @a objects are nodes # @return Measure structure # @sa BoundingBox() @@ -2687,6 +2874,14 @@ class Mesh: def AddPolygonalFace(self, IdsOfNodes): return self.editor.AddPolygonalFace(IdsOfNodes) + ## Adds a quadratic polygonal face to the mesh by the list of node IDs + # @param IdsOfNodes the list of node IDs for creation of the element; + # corner nodes follow first. + # @return the Id of the new face + # @ingroup l2_modif_add + def AddQuadPolygonalFace(self, IdsOfNodes): + return self.editor.AddQuadPolygonalFace(IdsOfNodes) + ## Creates both simple and quadratic volume (this is determined # by the number of given nodes). # @param IDsOfNodes the list of node IDs for creation of the element. @@ -2725,7 +2920,7 @@ class Mesh: # @ingroup l2_modif_add def SetNodeOnVertex(self, NodeID, Vertex): if ( isinstance( Vertex, geomBuilder.GEOM._objref_GEOM_Object)): - VertexID = Vertex.GetSubShapeIndices()[0] + VertexID = self.geompyD.GetSubShapeID( self.geom, Vertex ) else: VertexID = Vertex try: @@ -2743,7 +2938,7 @@ class Mesh: # @ingroup l2_modif_add def SetNodeOnEdge(self, NodeID, Edge, paramOnEdge): if ( isinstance( Edge, geomBuilder.GEOM._objref_GEOM_Object)): - EdgeID = Edge.GetSubShapeIndices()[0] + EdgeID = self.geompyD.GetSubShapeID( self.geom, Edge ) else: EdgeID = Edge try: @@ -2761,7 +2956,7 @@ class Mesh: # @ingroup l2_modif_add def SetNodeOnFace(self, NodeID, Face, u, v): if ( isinstance( Face, geomBuilder.GEOM._objref_GEOM_Object)): - FaceID = Face.GetSubShapeIndices()[0] + FaceID = self.geompyD.GetSubShapeID( self.geom, Face ) else: FaceID = Face try: @@ -2777,7 +2972,7 @@ class Mesh: # @ingroup l2_modif_add def SetNodeInVolume(self, NodeID, Solid): if ( isinstance( Solid, geomBuilder.GEOM._objref_GEOM_Object)): - SolidID = Solid.GetSubShapeIndices()[0] + SolidID = self.geompyD.GetSubShapeID( self.geom, Solid ) else: SolidID = Solid try: @@ -2793,7 +2988,7 @@ class Mesh: # @ingroup l2_modif_add def SetMeshElementOnShape(self, ElementID, Shape): if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)): - ShapeID = Shape.GetSubShapeIndices()[0] + ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape ) else: ShapeID = Shape try: @@ -2843,8 +3038,9 @@ class Mesh: # @param x the X coordinate of a point # @param y the Y coordinate of a point # @param z the Z coordinate of a point - # @param elementType type of elements to find (SMESH.ALL type - # means elements of any type excluding nodes, discrete and 0D elements) + # @param elementType type of elements to find; either of + # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME); SMESH.ALL type + # means elements of any type excluding nodes, discrete and 0D elements. # @param meshPart a part of mesh (group, sub-mesh) to search within # @return list of IDs of found elements # @ingroup l2_modif_throughp @@ -2854,10 +3050,9 @@ class Mesh: else: return self.editor.FindElementsByPoint(x, y, z, elementType) - # Return point state in a closed 2D mesh in terms of TopAbs_State enumeration: - # 0-IN, 1-OUT, 2-ON, 3-UNKNOWN - # TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails. - + ## Return point state in a closed 2D mesh in terms of TopAbs_State enumeration: + # 0-IN, 1-OUT, 2-ON, 3-UNKNOWN + # UNKNOWN state means that either mesh is wrong or the analysis fails. def GetPointState(self, x, y, z): return self.editor.GetPointState(x, y, z) @@ -2943,13 +3138,46 @@ class Mesh: theFace = -1 return self.editor.Reorient2D( the2DObject, theDirection, theFace, thePoint ) + ## Reorient faces according to adjacent volumes. + # @param the2DObject is a mesh, sub-mesh, group or list of + # either IDs of faces or face groups. + # @param the3DObject is a mesh, sub-mesh, group or list of IDs of volumes. + # @param theOutsideNormal to orient faces to have their normals + # pointing either \a outside or \a inside the adjacent volumes. + # @return number of reoriented faces. + # @ingroup l2_modif_changori + def Reorient2DBy3D(self, the2DObject, the3DObject, theOutsideNormal=True ): + unRegister = genObjUnRegister() + # check the2DObject + if not isinstance( the2DObject, list ): + the2DObject = [ the2DObject ] + elif the2DObject and isinstance( the2DObject[0], int ): + the2DObject = self.GetIDSource( the2DObject, SMESH.FACE ) + unRegister.set( the2DObject ) + the2DObject = [ the2DObject ] + for i,obj2D in enumerate( the2DObject ): + if isinstance( obj2D, Mesh ): + the2DObject[i] = obj2D.GetMesh() + if isinstance( obj2D, list ): + the2DObject[i] = self.GetIDSource( obj2D, SMESH.FACE ) + unRegister.set( the2DObject[i] ) + # check the3DObject + if isinstance( the3DObject, Mesh ): + the3DObject = the3DObject.GetMesh() + if isinstance( the3DObject, list ): + the3DObject = self.GetIDSource( the3DObject, SMESH.VOLUME ) + unRegister.set( the3DObject ) + return self.editor.Reorient2DBy3D( the2DObject, the3DObject, theOutsideNormal ) + ## Fuses the neighbouring triangles into quadrangles. - # @param IDsOfElements The triangles to be fused, - # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to - # choose a neighbour to fuse with. + # @param IDsOfElements The triangles to be fused. + # @param theCriterion a numerical functor, in terms of enum SMESH.FunctorType, used to + # applied to possible quadrangles to choose a neighbour to fuse with. + # Type SMESH.FunctorType._items in the Python Console to see all items. + # Note that not all items correspond to numerical functors. # @param MaxAngle is the maximum angle between element normals at which the fusion - # is still performed; theMaxAngle is mesured in radians. - # Also it could be a name of variable which defines angle in degrees. + # is still performed; theMaxAngle is mesured in radians. + # Also it could be a name of variable which defines angle in degrees. # @return TRUE in case of success, FALSE otherwise. # @ingroup l2_modif_unitetri def TriToQuad(self, IDsOfElements, theCriterion, MaxAngle): @@ -2962,10 +3190,12 @@ class Mesh: ## Fuses the neighbouring triangles of the object into quadrangles # @param theObject is mesh, submesh or group - # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to - # choose a neighbour to fuse with. + # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, + # applied to possible quadrangles to choose a neighbour to fuse with. + # Type SMESH.FunctorType._items in the Python Console to see all items. + # Note that not all items correspond to numerical functors. # @param MaxAngle a max angle between element normals at which the fusion - # is still performed; theMaxAngle is mesured in radians. + # is still performed; theMaxAngle is mesured in radians. # @return TRUE in case of success, FALSE otherwise. # @ingroup l2_modif_unitetri def TriToQuadObject (self, theObject, theCriterion, MaxAngle): @@ -2978,9 +3208,11 @@ class Mesh: ## Splits quadrangles into triangles. # @param IDsOfElements the faces to be splitted. - # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to + # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to # choose a diagonal for splitting. If @a theCriterion is None, which is a default # value, then quadrangles will be split by the smallest diagonal. + # Type SMESH.FunctorType._items in the Python Console to see all items. + # Note that not all items correspond to numerical functors. # @return TRUE in case of success, FALSE otherwise. # @ingroup l2_modif_cutquadr def QuadToTri (self, IDsOfElements, theCriterion = None): @@ -2997,6 +3229,8 @@ class Mesh: # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to # choose a diagonal for splitting. If @a theCriterion is None, which is a default # value, then quadrangles will be split by the smallest diagonal. + # Type SMESH.FunctorType._items in the Python Console to see all items. + # Note that not all items correspond to numerical functors. # @return TRUE in case of success, FALSE otherwise. # @ingroup l2_modif_cutquadr def QuadToTriObject (self, theObject, theCriterion = None): @@ -3048,6 +3282,8 @@ class Mesh: # @param IDOfQuad the ID of the quadrangle to be splitted. # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to # choose a diagonal for splitting. + # Type SMESH.FunctorType._items in the Python Console to see all items. + # Note that not all items correspond to numerical functors. # @return 1 if 1-3 diagonal is better, 2 if 2-4 # diagonal is better, 0 if error occurs. # @ingroup l2_modif_cutquadr @@ -3068,6 +3304,29 @@ class Mesh: elems = self.editor.MakeIDSource(elems, SMESH.VOLUME) unRegister.set( elems ) self.editor.SplitVolumesIntoTetra(elems, method) + return + + ## Split bi-quadratic elements into linear ones without creation of additional nodes: + # - bi-quadratic triangle will be split into 3 linear quadrangles; + # - bi-quadratic quadrangle will be split into 4 linear quadrangles; + # - tri-quadratic hexahedron will be split into 8 linear hexahedra. + # Quadratic elements of lower dimension adjacent to the split bi-quadratic element + # will be split in order to keep the mesh conformal. + # @param elems - elements to split: sub-meshes, groups, filters or element IDs; + # if None (default), all bi-quadratic elements will be split + # @ingroup l2_modif_cutquadr + def SplitBiQuadraticIntoLinear(self, elems=None): + unRegister = genObjUnRegister() + if elems and isinstance( elems, list ) and isinstance( elems[0], int ): + elems = self.editor.MakeIDSource(elems, SMESH.ALL) + unRegister.set( elems ) + if elems is None: + elems = [ self.GetMesh() ] + if isinstance( elems, Mesh ): + elems = [ elems.GetMesh() ] + if not isinstance( elems, list ): + elems = [elems] + self.editor.SplitBiQuadraticIntoLinear( elems ) ## Splits hexahedra into prisms # @param elems either a list of elements or a mesh or a group or a submesh or a filter @@ -3328,11 +3587,11 @@ class Mesh: # them with quadratic with the same id. # @param theForce3d new node creation method: # 0 - the medium node lies at the geometrical entity from which the mesh element is built - # 1 - the medium node lies at the middle of the line segments connecting start and end node of a mesh element + # 1 - the medium node lies at the middle of the line segments connecting two nodes of a mesh element # @param theSubMesh a group or a sub-mesh to convert; WARNING: in this case the mesh can become not conformal # @param theToBiQuad If True, converts the mesh to bi-quadratic # @ingroup l2_modif_tofromqu - def ConvertToQuadratic(self, theForce3d, theSubMesh=None, theToBiQuad=False): + def ConvertToQuadratic(self, theForce3d=False, theSubMesh=None, theToBiQuad=False): if isinstance( theSubMesh, Mesh ): theSubMesh = theSubMesh.mesh if theToBiQuad: @@ -3360,15 +3619,15 @@ class Mesh: ## Creates 2D mesh as skin on boundary faces of a 3D mesh # @return TRUE if operation has been completed successfully, FALSE otherwise # @ingroup l2_modif_edit - def Make2DMeshFrom3D(self): - return self.editor. Make2DMeshFrom3D() + def Make2DMeshFrom3D(self): + return self.editor.Make2DMeshFrom3D() ## Creates missing boundary elements # @param elements - elements whose boundary is to be checked: # mesh, group, sub-mesh or list of elements # if elements is mesh, it must be the mesh whose MakeBoundaryMesh() is called - # @param dimension - defines type of boundary elements to create: - # SMESH.BND_2DFROM3D, SMESH.BND_1DFROM3D, SMESH.BND_1DFROM2D + # @param dimension - defines type of boundary elements to create, either of + # { SMESH.BND_2DFROM3D, SMESH.BND_1DFROM3D, SMESH.BND_1DFROM2D } # SMESH.BND_1DFROM3D creates mesh edges on all borders of free facets of 3D cells # @param groupName - a name of group to store created boundary elements in, # "" means not to create the group @@ -3397,15 +3656,16 @@ class Mesh: ## # @brief Creates missing boundary elements around either the whole mesh or - # groups of 2D elements - # @param dimension - defines type of boundary elements to create + # groups of elements + # @param dimension - defines type of boundary elements to create, either of + # { SMESH.BND_2DFROM3D, SMESH.BND_1DFROM3D, SMESH.BND_1DFROM2D } # @param groupName - a name of group to store all boundary elements in, # "" means not to create the group # @param meshName - a name of a new mesh, which is a copy of the initial # mesh + created boundary elements; "" means not to create the new mesh # @param toCopyAll - if true, the whole initial mesh will be copied into # the new mesh else only boundary elements will be copied into the new mesh - # @param groups - groups of 2D elements to make boundary around + # @param groups - groups of elements to make boundary around # @retval tuple( long, mesh, groups ) # long - number of added boundary elements # mesh - the mesh where elements were added to @@ -3418,20 +3678,37 @@ class Mesh: if mesh: mesh = self.smeshpyD.Mesh(mesh) return nb, mesh, group - ## Renumber mesh nodes + ## Renumber mesh nodes (Obsolete, does nothing) # @ingroup l2_modif_renumber def RenumberNodes(self): self.editor.RenumberNodes() - ## Renumber mesh elements + ## Renumber mesh elements (Obsole, does nothing) # @ingroup l2_modif_renumber def RenumberElements(self): self.editor.RenumberElements() - ## Generates new elements by rotation of the elements around the axis - # @param IDsOfElements the list of ids of elements to sweep - # @param Axis the axis of rotation, AxisStruct or line(geom object) - # @param AngleInRadians the angle of Rotation (in radians) or a name of variable which defines angle in degrees + ## Private method converting \a arg into a list of SMESH_IdSource's + def _getIdSourceList(self, arg, idType, unRegister): + if arg and isinstance( arg, list ): + if isinstance( arg[0], int ): + arg = self.GetIDSource( arg, idType ) + unRegister.set( arg ) + elif isinstance( arg[0], Mesh ): + arg[0] = arg[0].GetMesh() + elif isinstance( arg, Mesh ): + arg = arg.GetMesh() + if arg and isinstance( arg, SMESH._objref_SMESH_IDSource ): + arg = [arg] + return arg + + ## Generates new elements by rotation of the given elements and nodes around the axis + # @param nodes - nodes to revolve: a list including ids, groups, sub-meshes or a mesh + # @param edges - edges to revolve: a list including ids, groups, sub-meshes or a mesh + # @param faces - faces to revolve: a list including ids, groups, sub-meshes or a mesh + # @param Axis the axis of rotation: AxisStruct, line (geom object) or [x,y,z,dx,dy,dz] + # @param AngleInRadians the angle of Rotation (in radians) or a name of variable + # which defines angle in degrees # @param NbOfSteps the number of steps # @param Tolerance tolerance # @param MakeGroups forces the generation of new groups from existing ones @@ -3439,23 +3716,44 @@ class Mesh: # of all steps, else - size of each step # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise # @ingroup l2_modif_extrurev - def RotationSweep(self, IDsOfElements, Axis, AngleInRadians, NbOfSteps, Tolerance, - MakeGroups=False, TotalAngle=False): - if IDsOfElements == []: - IDsOfElements = self.GetElementsId() - if ( isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object)): - Axis = self.smeshpyD.GetAxisStruct(Axis) + def RotationSweepObjects(self, nodes, edges, faces, Axis, AngleInRadians, NbOfSteps, Tolerance, + MakeGroups=False, TotalAngle=False): + unRegister = genObjUnRegister() + nodes = self._getIdSourceList( nodes, SMESH.NODE, unRegister ) + edges = self._getIdSourceList( edges, SMESH.EDGE, unRegister ) + faces = self._getIdSourceList( faces, SMESH.FACE, unRegister ) + + if isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object): + Axis = self.smeshpyD.GetAxisStruct( Axis ) + if isinstance( Axis, list ): + Axis = SMESH.AxisStruct( *Axis ) + AngleInRadians,AngleParameters,hasVars = ParseAngles(AngleInRadians) NbOfSteps,Tolerance,Parameters,hasVars = ParseParameters(NbOfSteps,Tolerance) Parameters = Axis.parameters + var_separator + AngleParameters + var_separator + Parameters self.mesh.SetParameters(Parameters) if TotalAngle and NbOfSteps: AngleInRadians /= NbOfSteps - if MakeGroups: - return self.editor.RotationSweepMakeGroups(IDsOfElements, Axis, - AngleInRadians, NbOfSteps, Tolerance) - self.editor.RotationSweep(IDsOfElements, Axis, AngleInRadians, NbOfSteps, Tolerance) - return [] + return self.editor.RotationSweepObjects( nodes, edges, faces, + Axis, AngleInRadians, + NbOfSteps, Tolerance, MakeGroups) + + ## Generates new elements by rotation of the elements around the axis + # @param IDsOfElements the list of ids of elements to sweep + # @param Axis the axis of rotation, AxisStruct or line(geom object) + # @param AngleInRadians the angle of Rotation (in radians) or a name of variable which defines angle in degrees + # @param NbOfSteps the number of steps + # @param Tolerance tolerance + # @param MakeGroups forces the generation of new groups from existing ones + # @param TotalAngle gives meaning of AngleInRadians: if True then it is an angular size + # of all steps, else - size of each step + # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + # @ingroup l2_modif_extrurev + def RotationSweep(self, IDsOfElements, Axis, AngleInRadians, NbOfSteps, Tolerance, + MakeGroups=False, TotalAngle=False): + return self.RotationSweepObjects([], IDsOfElements, IDsOfElements, Axis, + AngleInRadians, NbOfSteps, Tolerance, + MakeGroups, TotalAngle) ## Generates new elements by rotation of the elements of object around the axis # @param theObject object which elements should be sweeped. @@ -3471,21 +3769,9 @@ class Mesh: # @ingroup l2_modif_extrurev def RotationSweepObject(self, theObject, Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups=False, TotalAngle=False): - if ( isinstance( theObject, Mesh )): - theObject = theObject.GetMesh() - if ( isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object)): - Axis = self.smeshpyD.GetAxisStruct(Axis) - AngleInRadians,AngleParameters,hasVars = ParseAngles(AngleInRadians) - NbOfSteps,Tolerance,Parameters,hasVars = ParseParameters(NbOfSteps,Tolerance) - Parameters = Axis.parameters + var_separator + AngleParameters + var_separator + Parameters - self.mesh.SetParameters(Parameters) - if TotalAngle and NbOfSteps: - AngleInRadians /= NbOfSteps - if MakeGroups: - return self.editor.RotationSweepObjectMakeGroups(theObject, Axis, AngleInRadians, - NbOfSteps, Tolerance) - self.editor.RotationSweepObject(theObject, Axis, AngleInRadians, NbOfSteps, Tolerance) - return [] + return self.RotationSweepObjects( [], theObject, theObject, Axis, + AngleInRadians, NbOfSteps, Tolerance, + MakeGroups, TotalAngle ) ## Generates new elements by rotation of the elements of object around the axis # @param theObject object which elements should be sweeped. @@ -3501,21 +3787,9 @@ class Mesh: # @ingroup l2_modif_extrurev def RotationSweepObject1D(self, theObject, Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups=False, TotalAngle=False): - if ( isinstance( theObject, Mesh )): - theObject = theObject.GetMesh() - if ( isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object)): - Axis = self.smeshpyD.GetAxisStruct(Axis) - AngleInRadians,AngleParameters,hasVars = ParseAngles(AngleInRadians) - NbOfSteps,Tolerance,Parameters,hasVars = ParseParameters(NbOfSteps,Tolerance) - Parameters = Axis.parameters + var_separator + AngleParameters + var_separator + Parameters - self.mesh.SetParameters(Parameters) - if TotalAngle and NbOfSteps: - AngleInRadians /= NbOfSteps - if MakeGroups: - return self.editor.RotationSweepObject1DMakeGroups(theObject, Axis, AngleInRadians, - NbOfSteps, Tolerance) - self.editor.RotationSweepObject1D(theObject, Axis, AngleInRadians, NbOfSteps, Tolerance) - return [] + return self.RotationSweepObjects([],theObject,[], Axis, + AngleInRadians, NbOfSteps, Tolerance, + MakeGroups, TotalAngle) ## Generates new elements by rotation of the elements of object around the axis # @param theObject object which elements should be sweeped. @@ -3531,113 +3805,113 @@ class Mesh: # @ingroup l2_modif_extrurev def RotationSweepObject2D(self, theObject, Axis, AngleInRadians, NbOfSteps, Tolerance, MakeGroups=False, TotalAngle=False): - if ( isinstance( theObject, Mesh )): - theObject = theObject.GetMesh() - if ( isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object)): - Axis = self.smeshpyD.GetAxisStruct(Axis) - AngleInRadians,AngleParameters,hasVars = ParseAngles(AngleInRadians) - NbOfSteps,Tolerance,Parameters,hasVars = ParseParameters(NbOfSteps,Tolerance) - Parameters = Axis.parameters + var_separator + AngleParameters + var_separator + Parameters - self.mesh.SetParameters(Parameters) - if TotalAngle and NbOfSteps: - AngleInRadians /= NbOfSteps - if MakeGroups: - return self.editor.RotationSweepObject2DMakeGroups(theObject, Axis, AngleInRadians, - NbOfSteps, Tolerance) - self.editor.RotationSweepObject2D(theObject, Axis, AngleInRadians, NbOfSteps, Tolerance) - return [] + return self.RotationSweepObjects([],[],theObject, Axis, AngleInRadians, + NbOfSteps, Tolerance, MakeGroups, TotalAngle) - ## Generates new elements by extrusion of the elements with given ids - # @param IDsOfElements the list of elements ids for extrusion + ## Generates new elements by extrusion of the given elements and nodes + # @param nodes - nodes to extrude: a list including ids, groups, sub-meshes or a mesh + # @param edges - edges to extrude: a list including ids, groups, sub-meshes or a mesh + # @param faces - faces to extrude: a list including ids, groups, sub-meshes or a mesh # @param StepVector vector or DirStruct or 3 vector components, defining # the direction and value of extrusion for one step (the total extrusion # length will be NbOfSteps * ||StepVector||) # @param NbOfSteps the number of steps # @param MakeGroups forces the generation of new groups from existing ones - # @param IsNodes is True if elements with given ids are nodes # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise # @ingroup l2_modif_extrurev - def ExtrusionSweep(self, IDsOfElements, StepVector, NbOfSteps, MakeGroups=False, IsNodes = False): - if IDsOfElements == []: - IDsOfElements = self.GetElementsId() + def ExtrusionSweepObjects(self, nodes, edges, faces, StepVector, NbOfSteps, MakeGroups=False): + unRegister = genObjUnRegister() + nodes = self._getIdSourceList( nodes, SMESH.NODE, unRegister ) + edges = self._getIdSourceList( edges, SMESH.EDGE, unRegister ) + faces = self._getIdSourceList( faces, SMESH.FACE, unRegister ) + if isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object): StepVector = self.smeshpyD.GetDirStruct(StepVector) if isinstance( StepVector, list ): StepVector = self.smeshpyD.MakeDirStruct(*StepVector) + NbOfSteps,Parameters,hasVars = ParseParameters(NbOfSteps) Parameters = StepVector.PS.parameters + var_separator + Parameters self.mesh.SetParameters(Parameters) - if MakeGroups: - if(IsNodes): - return self.editor.ExtrusionSweepMakeGroups0D(IDsOfElements, StepVector, NbOfSteps) - else: - return self.editor.ExtrusionSweepMakeGroups(IDsOfElements, StepVector, NbOfSteps) - if(IsNodes): - self.editor.ExtrusionSweep0D(IDsOfElements, StepVector, NbOfSteps) - else: - self.editor.ExtrusionSweep(IDsOfElements, StepVector, NbOfSteps) - return [] + + return self.editor.ExtrusionSweepObjects( nodes, edges, faces, + StepVector, NbOfSteps, MakeGroups) + ## Generates new elements by extrusion of the elements with given ids - # @param IDsOfElements is ids of elements + # @param IDsOfElements the list of ids of elements or nodes for extrusion # @param StepVector vector or DirStruct or 3 vector components, defining # the direction and value of extrusion for one step (the total extrusion # length will be NbOfSteps * ||StepVector||) # @param NbOfSteps the number of steps - # @param ExtrFlags sets flags for extrusion - # @param SewTolerance uses for comparing locations of nodes if flag - # EXTRUSION_FLAG_SEW is set # @param MakeGroups forces the generation of new groups from existing ones - # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + # @param IsNodes is True if elements with given ids are nodes + # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise # @ingroup l2_modif_extrurev - def AdvancedExtrusion(self, IDsOfElements, StepVector, NbOfSteps, - ExtrFlags, SewTolerance, MakeGroups=False): - if ( isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object)): - StepVector = self.smeshpyD.GetDirStruct(StepVector) - if isinstance( StepVector, list ): - StepVector = self.smeshpyD.MakeDirStruct(*StepVector) - if MakeGroups: - return self.editor.AdvancedExtrusionMakeGroups(IDsOfElements, StepVector, NbOfSteps, - ExtrFlags, SewTolerance) - self.editor.AdvancedExtrusion(IDsOfElements, StepVector, NbOfSteps, - ExtrFlags, SewTolerance) - return [] + def ExtrusionSweep(self, IDsOfElements, StepVector, NbOfSteps, MakeGroups=False, IsNodes = False): + n,e,f = [],[],[] + if IsNodes: n = IDsOfElements + else : e,f, = IDsOfElements,IDsOfElements + return self.ExtrusionSweepObjects(n,e,f, StepVector, NbOfSteps, MakeGroups) + + ## Generates new elements by extrusion along the normal to a discretized surface or wire + # @param Elements elements to extrude - a list including ids, groups, sub-meshes or a mesh. + # Only faces can be extruded so far. A sub-mesh should be a sub-mesh on geom faces. + # @param StepSize length of one extrusion step (the total extrusion + # length will be \a NbOfSteps * \a StepSize ). + # @param NbOfSteps number of extrusion steps. + # @param ByAverageNormal if True each node is translated by \a StepSize + # along the average of the normal vectors to the faces sharing the node; + # else each node is translated along the same average normal till + # intersection with the plane got by translation of the face sharing + # the node along its own normal by \a StepSize. + # @param UseInputElemsOnly to use only \a Elements when computing extrusion direction + # for every node of \a Elements. + # @param MakeGroups forces generation of new groups from existing ones. + # @param Dim dimension of elements to extrude: 2 - faces or 1 - edges. Extrusion of edges + # is not yet implemented. This parameter is used if \a Elements contains + # both faces and edges, i.e. \a Elements is a Mesh. + # @return the list of created groups (SMESH_GroupBase) if \a MakeGroups=True, + # empty list otherwise. + # @ingroup l2_modif_extrurev + def ExtrusionByNormal(self, Elements, StepSize, NbOfSteps, + ByAverageNormal=False, UseInputElemsOnly=True, MakeGroups=False, Dim = 2): + unRegister = genObjUnRegister() + if isinstance( Elements, Mesh ): + Elements = [ Elements.GetMesh() ] + if isinstance( Elements, list ): + if not Elements: + raise RuntimeError, "Elements empty!" + if isinstance( Elements[0], int ): + Elements = self.GetIDSource( Elements, SMESH.ALL ) + unRegister.set( Elements ) + if not isinstance( Elements, list ): + Elements = [ Elements ] + StepSize,NbOfSteps,Parameters,hasVars = ParseParameters(StepSize,NbOfSteps) + self.mesh.SetParameters(Parameters) + return self.editor.ExtrusionByNormal(Elements, StepSize, NbOfSteps, + ByAverageNormal, UseInputElemsOnly, MakeGroups, Dim) - ## Generates new elements by extrusion of the elements which belong to the object - # @param theObject the object which elements should be processed. - # It can be a mesh, a sub mesh or a group. + ## Generates new elements by extrusion of the elements or nodes which belong to the object + # @param theObject the object whose elements or nodes should be processed. + # It can be a mesh, a sub-mesh or a group. # @param StepVector vector or DirStruct or 3 vector components, defining # the direction and value of extrusion for one step (the total extrusion # length will be NbOfSteps * ||StepVector||) # @param NbOfSteps the number of steps # @param MakeGroups forces the generation of new groups from existing ones - # @param IsNodes is True if elements which belong to the object are nodes + # @param IsNodes is True if elements to extrude are nodes # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise # @ingroup l2_modif_extrurev def ExtrusionSweepObject(self, theObject, StepVector, NbOfSteps, MakeGroups=False, IsNodes=False): - if ( isinstance( theObject, Mesh )): - theObject = theObject.GetMesh() - if ( isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object)): - StepVector = self.smeshpyD.GetDirStruct(StepVector) - if isinstance( StepVector, list ): - StepVector = self.smeshpyD.MakeDirStruct(*StepVector) - NbOfSteps,Parameters,hasVars = ParseParameters(NbOfSteps) - Parameters = StepVector.PS.parameters + var_separator + Parameters - self.mesh.SetParameters(Parameters) - if MakeGroups: - if(IsNodes): - return self.editor.ExtrusionSweepObject0DMakeGroups(theObject, StepVector, NbOfSteps) - else: - return self.editor.ExtrusionSweepObjectMakeGroups(theObject, StepVector, NbOfSteps) - if(IsNodes): - self.editor.ExtrusionSweepObject0D(theObject, StepVector, NbOfSteps) - else: - self.editor.ExtrusionSweepObject(theObject, StepVector, NbOfSteps) - return [] - - ## Generates new elements by extrusion of the elements which belong to the object - # @param theObject object which elements should be processed. - # It can be a mesh, a sub mesh or a group. + n,e,f = [],[],[] + if IsNodes: n = theObject + else : e,f, = theObject,theObject + return self.ExtrusionSweepObjects(n,e,f, StepVector, NbOfSteps, MakeGroups) + + ## Generates new elements by extrusion of edges which belong to the object + # @param theObject object whose 1D elements should be processed. + # It can be a mesh, a sub-mesh or a group. # @param StepVector vector or DirStruct or 3 vector components, defining # the direction and value of extrusion for one step (the total extrusion # length will be NbOfSteps * ||StepVector||) @@ -3646,23 +3920,11 @@ class Mesh: # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise # @ingroup l2_modif_extrurev def ExtrusionSweepObject1D(self, theObject, StepVector, NbOfSteps, MakeGroups=False): - if ( isinstance( theObject, Mesh )): - theObject = theObject.GetMesh() - if ( isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object)): - StepVector = self.smeshpyD.GetDirStruct(StepVector) - if isinstance( StepVector, list ): - StepVector = self.smeshpyD.MakeDirStruct(*StepVector) - NbOfSteps,Parameters,hasVars = ParseParameters(NbOfSteps) - Parameters = StepVector.PS.parameters + var_separator + Parameters - self.mesh.SetParameters(Parameters) - if MakeGroups: - return self.editor.ExtrusionSweepObject1DMakeGroups(theObject, StepVector, NbOfSteps) - self.editor.ExtrusionSweepObject1D(theObject, StepVector, NbOfSteps) - return [] + return self.ExtrusionSweepObjects([],theObject,[], StepVector, NbOfSteps, MakeGroups) - ## Generates new elements by extrusion of the elements which belong to the object - # @param theObject object which elements should be processed. - # It can be a mesh, a sub mesh or a group. + ## Generates new elements by extrusion of faces which belong to the object + # @param theObject object whose 2D elements should be processed. + # It can be a mesh, a sub-mesh or a group. # @param StepVector vector or DirStruct or 3 vector components, defining # the direction and value of extrusion for one step (the total extrusion # length will be NbOfSteps * ||StepVector||) @@ -3671,25 +3933,74 @@ class Mesh: # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise # @ingroup l2_modif_extrurev def ExtrusionSweepObject2D(self, theObject, StepVector, NbOfSteps, MakeGroups=False): - if ( isinstance( theObject, Mesh )): - theObject = theObject.GetMesh() - if ( isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object)): + return self.ExtrusionSweepObjects([],[],theObject, StepVector, NbOfSteps, MakeGroups) + + ## Generates new elements by extrusion of the elements with given ids + # @param IDsOfElements is ids of elements + # @param StepVector vector or DirStruct or 3 vector components, defining + # the direction and value of extrusion for one step (the total extrusion + # length will be NbOfSteps * ||StepVector||) + # @param NbOfSteps the number of steps + # @param ExtrFlags sets flags for extrusion + # @param SewTolerance uses for comparing locations of nodes if flag + # EXTRUSION_FLAG_SEW is set + # @param MakeGroups forces the generation of new groups from existing ones + # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise + # @ingroup l2_modif_extrurev + def AdvancedExtrusion(self, IDsOfElements, StepVector, NbOfSteps, + ExtrFlags, SewTolerance, MakeGroups=False): + if isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object): StepVector = self.smeshpyD.GetDirStruct(StepVector) if isinstance( StepVector, list ): StepVector = self.smeshpyD.MakeDirStruct(*StepVector) - NbOfSteps,Parameters,hasVars = ParseParameters(NbOfSteps) - Parameters = StepVector.PS.parameters + var_separator + Parameters - self.mesh.SetParameters(Parameters) - if MakeGroups: - return self.editor.ExtrusionSweepObject2DMakeGroups(theObject, StepVector, NbOfSteps) - self.editor.ExtrusionSweepObject2D(theObject, StepVector, NbOfSteps) - return [] + return self.editor.AdvancedExtrusion(IDsOfElements, StepVector, NbOfSteps, + ExtrFlags, SewTolerance, MakeGroups) + ## Generates new elements by extrusion of the given elements and nodes along the path. + # The path of extrusion must be a meshed edge. + # @param Nodes nodes to extrude: a list including ids, groups, sub-meshes or a mesh + # @param Edges edges to extrude: a list including ids, groups, sub-meshes or a mesh + # @param Faces faces to extrude: a list including ids, groups, sub-meshes or a mesh + # @param PathMesh 1D mesh or 1D sub-mesh, along which proceeds the extrusion + # @param PathShape shape (edge) defines the sub-mesh of PathMesh if PathMesh + # contains not only path segments, else it can be None + # @param NodeStart the first or the last node on the path. Defines the direction of extrusion + # @param HasAngles allows the shape to be rotated around the path + # to get the resulting mesh in a helical fashion + # @param Angles list of angles + # @param LinearVariation forces the computation of rotation angles as linear + # variation of the given Angles along path steps + # @param HasRefPoint allows using the reference point + # @param RefPoint the point around which the shape is rotated (the mass center of the + # shape by default). The User can specify any point as the Reference Point. + # @param MakeGroups forces the generation of new groups from existing ones + # @return list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error + # @ingroup l2_modif_extrurev + def ExtrusionAlongPathObjects(self, Nodes, Edges, Faces, PathMesh, PathShape=None, + NodeStart=1, HasAngles=False, Angles=[], LinearVariation=False, + HasRefPoint=False, RefPoint=[0,0,0], MakeGroups=False): + unRegister = genObjUnRegister() + Nodes = self._getIdSourceList( Nodes, SMESH.NODE, unRegister ) + Edges = self._getIdSourceList( Edges, SMESH.EDGE, unRegister ) + Faces = self._getIdSourceList( Faces, SMESH.FACE, unRegister ) + if isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object): + RefPoint = self.smeshpyD.GetPointStruct(RefPoint) + if isinstance( RefPoint, list ): + RefPoint = SMESH.PointStruct( *RefPoint ) + if isinstance( PathMesh, Mesh ): + PathMesh = PathMesh.GetMesh() + Angles,AnglesParameters,hasVars = ParseAngles(Angles) + Parameters = AnglesParameters + var_separator + RefPoint.parameters + self.mesh.SetParameters(Parameters) + return self.editor.ExtrusionAlongPathObjects(Nodes, Edges, Faces, + PathMesh, PathShape, NodeStart, + HasAngles, Angles, LinearVariation, + HasRefPoint, RefPoint, MakeGroups) ## Generates new elements by extrusion of the given elements # The path of extrusion must be a meshed edge. - # @param Base mesh or group, or submesh, or list of ids of elements for extrusion + # @param Base mesh or group, or sub-mesh, or list of ids of elements for extrusion # @param Path - 1D mesh or 1D sub-mesh, along which proceeds the extrusion # @param NodeStart the start node from Path. Defines the direction of extrusion # @param HasAngles allows the shape to be rotated around the path @@ -3710,34 +4021,15 @@ class Mesh: def ExtrusionAlongPathX(self, Base, Path, NodeStart, HasAngles, Angles, LinearVariation, HasRefPoint, RefPoint, MakeGroups, ElemType): - if isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object): - RefPoint = self.smeshpyD.GetPointStruct(RefPoint) - pass - elif isinstance( RefPoint, list ): - RefPoint = PointStruct(*RefPoint) - pass - Angles,AnglesParameters,hasVars = ParseAngles(Angles) - Parameters = AnglesParameters + var_separator + RefPoint.parameters - self.mesh.SetParameters(Parameters) - - if (isinstance(Path, Mesh)): Path = Path.GetMesh() - - if isinstance(Base, list): - IDsOfElements = [] - if Base == []: IDsOfElements = self.GetElementsId() - else: IDsOfElements = Base - return self.editor.ExtrusionAlongPathX(IDsOfElements, Path, NodeStart, - HasAngles, Angles, LinearVariation, - HasRefPoint, RefPoint, MakeGroups, ElemType) - else: - if isinstance(Base, Mesh): Base = Base.GetMesh() - if isinstance(Base, SMESH._objref_SMESH_Mesh) or isinstance(Base, SMESH._objref_SMESH_Group) or isinstance(Base, SMESH._objref_SMESH_subMesh): - return self.editor.ExtrusionAlongPathObjX(Base, Path, NodeStart, - HasAngles, Angles, LinearVariation, - HasRefPoint, RefPoint, MakeGroups, ElemType) - else: - raise RuntimeError, "Invalid Base for ExtrusionAlongPathX" - + n,e,f = [],[],[] + if ElemType == SMESH.NODE: n = Base + if ElemType == SMESH.EDGE: e = Base + if ElemType == SMESH.FACE: f = Base + gr,er = self.ExtrusionAlongPathObjects(n,e,f, Path, None, NodeStart, + HasAngles, Angles, LinearVariation, + HasRefPoint, RefPoint, MakeGroups) + if MakeGroups: return gr,er + return er ## Generates new elements by extrusion of the given elements # The path of extrusion must be a meshed edge. @@ -3760,30 +4052,18 @@ class Mesh: def ExtrusionAlongPath(self, IDsOfElements, PathMesh, PathShape, NodeStart, HasAngles, Angles, HasRefPoint, RefPoint, MakeGroups=False, LinearVariation=False): - if IDsOfElements == []: - IDsOfElements = self.GetElementsId() - if ( isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object)): - RefPoint = self.smeshpyD.GetPointStruct(RefPoint) - pass - if ( isinstance( PathMesh, Mesh )): - PathMesh = PathMesh.GetMesh() - Angles,AnglesParameters,hasVars = ParseAngles(Angles) - Parameters = AnglesParameters + var_separator + RefPoint.parameters - self.mesh.SetParameters(Parameters) - if HasAngles and Angles and LinearVariation: - Angles = self.editor.LinearAnglesVariation( PathMesh, PathShape, Angles ) - pass - if MakeGroups: - return self.editor.ExtrusionAlongPathMakeGroups(IDsOfElements, PathMesh, - PathShape, NodeStart, HasAngles, - Angles, HasRefPoint, RefPoint) - return self.editor.ExtrusionAlongPath(IDsOfElements, PathMesh, PathShape, - NodeStart, HasAngles, Angles, HasRefPoint, RefPoint) + n,e,f = [],IDsOfElements,IDsOfElements + gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, + NodeStart, HasAngles, Angles, + LinearVariation, + HasRefPoint, RefPoint, MakeGroups) + if MakeGroups: return gr,er + return er ## Generates new elements by extrusion of the elements which belong to the object # The path of extrusion must be a meshed edge. - # @param theObject the object which elements should be processed. - # It can be a mesh, a sub mesh or a group. + # @param theObject the object whose elements should be processed. + # It can be a mesh, a sub-mesh or a group. # @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds # @param PathShape shape(edge) defines the sub-mesh for the path # @param NodeStart the first or the last node on the edge. Defines the direction of extrusion @@ -3802,30 +4082,17 @@ class Mesh: def ExtrusionAlongPathObject(self, theObject, PathMesh, PathShape, NodeStart, HasAngles, Angles, HasRefPoint, RefPoint, MakeGroups=False, LinearVariation=False): - if ( isinstance( theObject, Mesh )): - theObject = theObject.GetMesh() - if ( isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object)): - RefPoint = self.smeshpyD.GetPointStruct(RefPoint) - if ( isinstance( PathMesh, Mesh )): - PathMesh = PathMesh.GetMesh() - Angles,AnglesParameters,hasVars = ParseAngles(Angles) - Parameters = AnglesParameters + var_separator + RefPoint.parameters - self.mesh.SetParameters(Parameters) - if HasAngles and Angles and LinearVariation: - Angles = self.editor.LinearAnglesVariation( PathMesh, PathShape, Angles ) - pass - if MakeGroups: - return self.editor.ExtrusionAlongPathObjectMakeGroups(theObject, PathMesh, - PathShape, NodeStart, HasAngles, - Angles, HasRefPoint, RefPoint) - return self.editor.ExtrusionAlongPathObject(theObject, PathMesh, PathShape, - NodeStart, HasAngles, Angles, HasRefPoint, - RefPoint) - - ## Generates new elements by extrusion of the elements which belong to the object + n,e,f = [],theObject,theObject + gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart, + HasAngles, Angles, LinearVariation, + HasRefPoint, RefPoint, MakeGroups) + if MakeGroups: return gr,er + return er + + ## Generates new elements by extrusion of mesh segments which belong to the object # The path of extrusion must be a meshed edge. - # @param theObject the object which elements should be processed. - # It can be a mesh, a sub mesh or a group. + # @param theObject the object whose 1D elements should be processed. + # It can be a mesh, a sub-mesh or a group. # @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds # @param PathShape shape(edge) defines the sub-mesh for the path # @param NodeStart the first or the last node on the edge. Defines the direction of extrusion @@ -3844,30 +4111,17 @@ class Mesh: def ExtrusionAlongPathObject1D(self, theObject, PathMesh, PathShape, NodeStart, HasAngles, Angles, HasRefPoint, RefPoint, MakeGroups=False, LinearVariation=False): - if ( isinstance( theObject, Mesh )): - theObject = theObject.GetMesh() - if ( isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object)): - RefPoint = self.smeshpyD.GetPointStruct(RefPoint) - if ( isinstance( PathMesh, Mesh )): - PathMesh = PathMesh.GetMesh() - Angles,AnglesParameters,hasVars = ParseAngles(Angles) - Parameters = AnglesParameters + var_separator + RefPoint.parameters - self.mesh.SetParameters(Parameters) - if HasAngles and Angles and LinearVariation: - Angles = self.editor.LinearAnglesVariation( PathMesh, PathShape, Angles ) - pass - if MakeGroups: - return self.editor.ExtrusionAlongPathObject1DMakeGroups(theObject, PathMesh, - PathShape, NodeStart, HasAngles, - Angles, HasRefPoint, RefPoint) - return self.editor.ExtrusionAlongPathObject1D(theObject, PathMesh, PathShape, - NodeStart, HasAngles, Angles, HasRefPoint, - RefPoint) - - ## Generates new elements by extrusion of the elements which belong to the object + n,e,f = [],theObject,[] + gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart, + HasAngles, Angles, LinearVariation, + HasRefPoint, RefPoint, MakeGroups) + if MakeGroups: return gr,er + return er + + ## Generates new elements by extrusion of faces which belong to the object # The path of extrusion must be a meshed edge. - # @param theObject the object which elements should be processed. - # It can be a mesh, a sub mesh or a group. + # @param theObject the object whose 2D elements should be processed. + # It can be a mesh, a sub-mesh or a group. # @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds # @param PathShape shape(edge) defines the sub-mesh for the path # @param NodeStart the first or the last node on the edge. Defines the direction of extrusion @@ -3886,41 +4140,30 @@ class Mesh: def ExtrusionAlongPathObject2D(self, theObject, PathMesh, PathShape, NodeStart, HasAngles, Angles, HasRefPoint, RefPoint, MakeGroups=False, LinearVariation=False): - if ( isinstance( theObject, Mesh )): - theObject = theObject.GetMesh() - if ( isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object)): - RefPoint = self.smeshpyD.GetPointStruct(RefPoint) - if ( isinstance( PathMesh, Mesh )): - PathMesh = PathMesh.GetMesh() - Angles,AnglesParameters,hasVars = ParseAngles(Angles) - Parameters = AnglesParameters + var_separator + RefPoint.parameters - self.mesh.SetParameters(Parameters) - if HasAngles and Angles and LinearVariation: - Angles = self.editor.LinearAnglesVariation( PathMesh, PathShape, Angles ) - pass - if MakeGroups: - return self.editor.ExtrusionAlongPathObject2DMakeGroups(theObject, PathMesh, - PathShape, NodeStart, HasAngles, - Angles, HasRefPoint, RefPoint) - return self.editor.ExtrusionAlongPathObject2D(theObject, PathMesh, PathShape, - NodeStart, HasAngles, Angles, HasRefPoint, - RefPoint) + n,e,f = [],[],theObject + gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart, + HasAngles, Angles, LinearVariation, + HasRefPoint, RefPoint, MakeGroups) + if MakeGroups: return gr,er + return er ## Creates a symmetrical copy of mesh elements # @param IDsOfElements list of elements ids # @param Mirror is AxisStruct or geom object(point, line, plane) - # @param theMirrorType is POINT, AXIS or PLANE - # If the Mirror is a geom object this parameter is unnecessary + # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE + # If the Mirror is a geom object this parameter is unnecessary # @param Copy allows to copy element (Copy is 1) or to replace with its mirroring (Copy is 0) # @param MakeGroups forces the generation of new groups from existing ones (if Copy) # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise # @ingroup l2_modif_trsf - def Mirror(self, IDsOfElements, Mirror, theMirrorType, Copy=0, MakeGroups=False): + def Mirror(self, IDsOfElements, Mirror, theMirrorType=None, Copy=0, MakeGroups=False): if IDsOfElements == []: IDsOfElements = self.GetElementsId() if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)): - Mirror = self.smeshpyD.GetAxisStruct(Mirror) - self.mesh.SetParameters(Mirror.parameters) + Mirror = self.smeshpyD.GetAxisStruct(Mirror) + theMirrorType = Mirror._mirrorType + else: + self.mesh.SetParameters(Mirror.parameters) if Copy and MakeGroups: return self.editor.MirrorMakeGroups(IDsOfElements, Mirror, theMirrorType) self.editor.Mirror(IDsOfElements, Mirror, theMirrorType, Copy) @@ -3929,18 +4172,20 @@ class Mesh: ## Creates a new mesh by a symmetrical copy of mesh elements # @param IDsOfElements the list of elements ids # @param Mirror is AxisStruct or geom object (point, line, plane) - # @param theMirrorType is POINT, AXIS or PLANE - # If the Mirror is a geom object this parameter is unnecessary + # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE + # If the Mirror is a geom object this parameter is unnecessary # @param MakeGroups to generate new groups from existing ones # @param NewMeshName a name of the new mesh to create # @return instance of Mesh class # @ingroup l2_modif_trsf - def MirrorMakeMesh(self, IDsOfElements, Mirror, theMirrorType, MakeGroups=0, NewMeshName=""): + def MirrorMakeMesh(self, IDsOfElements, Mirror, theMirrorType=0, MakeGroups=0, NewMeshName=""): if IDsOfElements == []: IDsOfElements = self.GetElementsId() if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)): - Mirror = self.smeshpyD.GetAxisStruct(Mirror) - self.mesh.SetParameters(Mirror.parameters) + Mirror = self.smeshpyD.GetAxisStruct(Mirror) + theMirrorType = Mirror._mirrorType + else: + self.mesh.SetParameters(Mirror.parameters) mesh = self.editor.MirrorMakeMesh(IDsOfElements, Mirror, theMirrorType, MakeGroups, NewMeshName) return Mesh(self.smeshpyD,self.geompyD,mesh) @@ -3948,18 +4193,20 @@ class Mesh: ## Creates a symmetrical copy of the object # @param theObject mesh, submesh or group # @param Mirror AxisStruct or geom object (point, line, plane) - # @param theMirrorType is POINT, AXIS or PLANE - # If the Mirror is a geom object this parameter is unnecessary + # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE + # If the Mirror is a geom object this parameter is unnecessary # @param Copy allows copying the element (Copy is 1) or replacing it with its mirror (Copy is 0) # @param MakeGroups forces the generation of new groups from existing ones (if Copy) # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise # @ingroup l2_modif_trsf - def MirrorObject (self, theObject, Mirror, theMirrorType, Copy=0, MakeGroups=False): + def MirrorObject (self, theObject, Mirror, theMirrorType=None, Copy=0, MakeGroups=False): if ( isinstance( theObject, Mesh )): theObject = theObject.GetMesh() if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)): - Mirror = self.smeshpyD.GetAxisStruct(Mirror) - self.mesh.SetParameters(Mirror.parameters) + Mirror = self.smeshpyD.GetAxisStruct(Mirror) + theMirrorType = Mirror._mirrorType + else: + self.mesh.SetParameters(Mirror.parameters) if Copy and MakeGroups: return self.editor.MirrorObjectMakeGroups(theObject, Mirror, theMirrorType) self.editor.MirrorObject(theObject, Mirror, theMirrorType, Copy) @@ -3968,18 +4215,20 @@ class Mesh: ## Creates a new mesh by a symmetrical copy of the object # @param theObject mesh, submesh or group # @param Mirror AxisStruct or geom object (point, line, plane) - # @param theMirrorType POINT, AXIS or PLANE - # If the Mirror is a geom object this parameter is unnecessary + # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE + # If the Mirror is a geom object this parameter is unnecessary # @param MakeGroups forces the generation of new groups from existing ones # @param NewMeshName the name of the new mesh to create # @return instance of Mesh class # @ingroup l2_modif_trsf - def MirrorObjectMakeMesh (self, theObject, Mirror, theMirrorType,MakeGroups=0, NewMeshName=""): + def MirrorObjectMakeMesh (self, theObject, Mirror, theMirrorType=0,MakeGroups=0,NewMeshName=""): if ( isinstance( theObject, Mesh )): theObject = theObject.GetMesh() - if (isinstance(Mirror, geomBuilder.GEOM._objref_GEOM_Object)): - Mirror = self.smeshpyD.GetAxisStruct(Mirror) - self.mesh.SetParameters(Mirror.parameters) + if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)): + Mirror = self.smeshpyD.GetAxisStruct(Mirror) + theMirrorType = Mirror._mirrorType + else: + self.mesh.SetParameters(Mirror.parameters) mesh = self.editor.MirrorObjectMakeMesh(theObject, Mirror, theMirrorType, MakeGroups, NewMeshName) return Mesh( self.smeshpyD,self.geompyD,mesh ) @@ -4064,7 +4313,7 @@ class Mesh: ## Scales the object # @param theObject - the object to translate (mesh, submesh, or group) - # @param thePoint - base point for scale + # @param thePoint - base point for scale (SMESH.PointStruct or list of 3 coordinates) # @param theScaleFact - list of 1-3 scale factors for axises # @param Copy - allows copying the translated elements # @param MakeGroups - forces the generation of new groups from existing @@ -4078,6 +4327,8 @@ class Mesh: if ( isinstance( theObject, list )): theObject = self.GetIDSource(theObject, SMESH.ALL) unRegister.set( theObject ) + if ( isinstance( thePoint, list )): + thePoint = PointStruct( thePoint[0], thePoint[1], thePoint[2] ) if ( isinstance( theScaleFact, float )): theScaleFact = [theScaleFact] if ( isinstance( theScaleFact, int )): @@ -4092,7 +4343,7 @@ class Mesh: ## Creates a new mesh from the translated object # @param theObject - the object to translate (mesh, submesh, or group) - # @param thePoint - base point for scale + # @param thePoint - base point for scale (SMESH.PointStruct or list of 3 coordinates) # @param theScaleFact - list of 1-3 scale factors for axises # @param MakeGroups - forces the generation of new groups from existing ones # @param NewMeshName - the name of the newly created mesh @@ -4104,6 +4355,8 @@ class Mesh: if ( isinstance( theObject, list )): theObject = self.GetIDSource(theObject,SMESH.ALL) unRegister.set( theObject ) + if ( isinstance( thePoint, list )): + thePoint = PointStruct( thePoint[0], thePoint[1], thePoint[2] ) if ( isinstance( theScaleFact, float )): theScaleFact = [theScaleFact] if ( isinstance( theScaleFact, int )): @@ -4200,45 +4453,63 @@ class Mesh: ## Finds groups of adjacent nodes within Tolerance. # @param Tolerance the value of tolerance - # @return the list of pairs of nodes IDs (e.g. [[1,12],[25,4]]) + # @param SeparateCornerAndMediumNodes if @c True, in quadratic mesh puts + # corner and medium nodes in separate groups thus preventing + # their further merge. + # @return the list of groups of nodes IDs (e.g. [[1,12,13],[4,25]]) # @ingroup l2_modif_trsf - def FindCoincidentNodes (self, Tolerance): - return self.editor.FindCoincidentNodes(Tolerance) + def FindCoincidentNodes (self, Tolerance, SeparateCornerAndMediumNodes=False): + return self.editor.FindCoincidentNodes( Tolerance, SeparateCornerAndMediumNodes ) ## Finds groups of ajacent nodes within Tolerance. # @param Tolerance the value of tolerance # @param SubMeshOrGroup SubMesh or Group # @param exceptNodes list of either SubMeshes, Groups or node IDs to exclude from search - # @return the list of pairs of nodes IDs (e.g. [[1,12],[25,4]]) + # @param SeparateCornerAndMediumNodes if @c True, in quadratic mesh puts + # corner and medium nodes in separate groups thus preventing + # their further merge. + # @return the list of groups of nodes IDs (e.g. [[1,12,13],[4,25]]) # @ingroup l2_modif_trsf - def FindCoincidentNodesOnPart (self, SubMeshOrGroup, Tolerance, exceptNodes=[]): + def FindCoincidentNodesOnPart (self, SubMeshOrGroup, Tolerance, + exceptNodes=[], SeparateCornerAndMediumNodes=False): unRegister = genObjUnRegister() if (isinstance( SubMeshOrGroup, Mesh )): SubMeshOrGroup = SubMeshOrGroup.GetMesh() - if not isinstance( exceptNodes, list): + if not isinstance( exceptNodes, list ): exceptNodes = [ exceptNodes ] - if exceptNodes and isinstance( exceptNodes[0], int): - exceptNodes = [ self.GetIDSource( exceptNodes, SMESH.NODE)] + if exceptNodes and isinstance( exceptNodes[0], int ): + exceptNodes = [ self.GetIDSource( exceptNodes, SMESH.NODE )] unRegister.set( exceptNodes ) - return self.editor.FindCoincidentNodesOnPartBut(SubMeshOrGroup, Tolerance,exceptNodes) + return self.editor.FindCoincidentNodesOnPartBut(SubMeshOrGroup, Tolerance, + exceptNodes, SeparateCornerAndMediumNodes) ## Merges nodes - # @param GroupsOfNodes a list of pairs of nodes IDs for merging (e.g. [[1,12],[25,4]]) + # @param GroupsOfNodes a list of groups of nodes IDs for merging + # (e.g. [[1,12,13],[25,4]], then nodes 12, 13 and 4 will be removed and replaced + # by nodes 1 and 25 correspondingly in all elements and groups + # @param NodesToKeep nodes to keep in the mesh: a list of groups, sub-meshes or node IDs. + # If @a NodesToKeep does not include a node to keep for some group to merge, + # then the first node in the group is kept. # @ingroup l2_modif_trsf - def MergeNodes (self, GroupsOfNodes): - self.editor.MergeNodes(GroupsOfNodes) + def MergeNodes (self, GroupsOfNodes, NodesToKeep=[]): + # NodesToKeep are converted to SMESH_IDSource in meshEditor.MergeNodes() + self.editor.MergeNodes(GroupsOfNodes,NodesToKeep) ## Finds the elements built on the same nodes. # @param MeshOrSubMeshOrGroup Mesh or SubMesh, or Group of elements for searching - # @return the list of pairs of equal elements IDs (e.g. [[1,12],[25,4]]) + # @return the list of groups of equal elements IDs (e.g. [[1,12,13],[4,25]]) # @ingroup l2_modif_trsf - def FindEqualElements (self, MeshOrSubMeshOrGroup): - if ( isinstance( MeshOrSubMeshOrGroup, Mesh )): + def FindEqualElements (self, MeshOrSubMeshOrGroup=None): + if not MeshOrSubMeshOrGroup: + MeshOrSubMeshOrGroup=self.mesh + elif isinstance( MeshOrSubMeshOrGroup, Mesh ): MeshOrSubMeshOrGroup = MeshOrSubMeshOrGroup.GetMesh() - return self.editor.FindEqualElements(MeshOrSubMeshOrGroup) + return self.editor.FindEqualElements( MeshOrSubMeshOrGroup ) ## Merges elements in each given group. - # @param GroupsOfElementsID a list of pairs of elements IDs for merging (e.g. [[1,12],[25,4]]) + # @param GroupsOfElementsID a list of groups of elements IDs for merging + # (e.g. [[1,12,13],[25,4]], then elements 12, 13 and 4 will be removed and + # replaced by elements 1 and 25 in all groups) # @ingroup l2_modif_trsf def MergeElements(self, GroupsOfElementsID): self.editor.MergeElements(GroupsOfElementsID) @@ -4318,11 +4589,12 @@ class Mesh: def ClearLastCreated(self): self.editor.ClearLastCreated() - ## Creates Duplicates given elements, i.e. creates new elements based on the + ## Creates duplicates of given elements, i.e. creates new elements based on the # same nodes as the given ones. # @param theElements - container of elements to duplicate. It can be a Mesh, - # sub-mesh, group, filter or a list of element IDs. - # @param theGroupName - a name of group to contain the generated elements. + # sub-mesh, group, filter or a list of element IDs. If \a theElements is + # a Mesh, elements of highest dimension are duplicated + # @param theGroupName - a name of group to contain the generated elements. # If a group with such a name already exists, the new elements # are added to the existng group, else a new group is created. # If \a theGroupName is empty, new elements are not added @@ -4493,9 +4765,11 @@ class Mesh: # Triangles are transformed in prisms, and quadrangles in hexahedrons. # @param theDomains - list of groups of volumes # @param createJointElems - if TRUE, create the elements + # @param onAllBoundaries - if TRUE, the nodes and elements are also created on + # the boundary between \a theDomains and the rest mesh # @return TRUE if operation has been completed successfully, FALSE otherwise - def DoubleNodesOnGroupBoundaries(self, theDomains, createJointElems ): - return self.editor.DoubleNodesOnGroupBoundaries( theDomains, createJointElems ) + def DoubleNodesOnGroupBoundaries(self, theDomains, createJointElems, onAllBoundaries=False ): + return self.editor.DoubleNodesOnGroupBoundaries( theDomains, createJointElems, onAllBoundaries ) ## Double nodes on some external faces and create flat elements. # Flat elements are mainly used by some types of mechanic calculations. @@ -4520,9 +4794,15 @@ class Mesh: self.functors[ funcType._v ] = fn return fn - def _valueFromFunctor(self, funcType, elemId): + ## Returns value of a functor for a given element + # @param funcType an item of SMESH.FunctorType enum + # Type "SMESH.FunctorType._items" in the Python Console to see all items. + # @param elemId element or node ID + # @param isElem @a elemId is ID of element or node + # @return the functor value or zero in case of invalid arguments + def FunctorValue(self, funcType, elemId, isElem=True): fn = self._getFunctor( funcType ) - if fn.GetElementType() == self.GetElementType(elemId, True): + if fn.GetElementType() == self.GetElementType(elemId, isElem): val = fn.GetValue(elemId) else: val = 0 @@ -4537,7 +4817,7 @@ class Mesh: if elemId == None: length = self.smeshpyD.GetLength(self) else: - length = self._valueFromFunctor(SMESH.FT_Length, elemId) + length = self.FunctorValue(SMESH.FT_Length, elemId) return length ## Get area of 2D element or sum of areas of all 2D mesh elements @@ -4549,7 +4829,7 @@ class Mesh: if elemId == None: area = self.smeshpyD.GetArea(self) else: - area = self._valueFromFunctor(SMESH.FT_Area, elemId) + area = self.FunctorValue(SMESH.FT_Area, elemId) return area ## Get volume of 3D element or sum of volumes of all 3D mesh elements @@ -4561,7 +4841,7 @@ class Mesh: if elemId == None: volume = self.smeshpyD.GetVolume(self) else: - volume = self._valueFromFunctor(SMESH.FT_Volume3D, elemId) + volume = self.FunctorValue(SMESH.FT_Volume3D, elemId) return volume ## Get maximum element length. @@ -4573,7 +4853,7 @@ class Mesh: ftype = SMESH.FT_MaxElementLength3D else: ftype = SMESH.FT_MaxElementLength2D - return self._valueFromFunctor(ftype, elemId) + return self.FunctorValue(ftype, elemId) ## Get aspect ratio of 2D or 3D element. # @param elemId mesh element ID @@ -4584,38 +4864,119 @@ class Mesh: ftype = SMESH.FT_AspectRatio3D else: ftype = SMESH.FT_AspectRatio - return self._valueFromFunctor(ftype, elemId) + return self.FunctorValue(ftype, elemId) ## Get warping angle of 2D element. # @param elemId mesh element ID # @return element's warping angle value # @ingroup l1_measurements def GetWarping(self, elemId): - return self._valueFromFunctor(SMESH.FT_Warping, elemId) + return self.FunctorValue(SMESH.FT_Warping, elemId) ## Get minimum angle of 2D element. # @param elemId mesh element ID # @return element's minimum angle value # @ingroup l1_measurements def GetMinimumAngle(self, elemId): - return self._valueFromFunctor(SMESH.FT_MinimumAngle, elemId) + return self.FunctorValue(SMESH.FT_MinimumAngle, elemId) ## Get taper of 2D element. # @param elemId mesh element ID # @return element's taper value # @ingroup l1_measurements def GetTaper(self, elemId): - return self._valueFromFunctor(SMESH.FT_Taper, elemId) + return self.FunctorValue(SMESH.FT_Taper, elemId) ## Get skew of 2D element. # @param elemId mesh element ID # @return element's skew value # @ingroup l1_measurements def GetSkew(self, elemId): - return self._valueFromFunctor(SMESH.FT_Skew, elemId) + return self.FunctorValue(SMESH.FT_Skew, elemId) + + ## Return minimal and maximal value of a given functor. + # @param funType a functor type, an item of SMESH.FunctorType enum + # (one of SMESH.FunctorType._items) + # @param meshPart a part of mesh (group, sub-mesh) to treat + # @return tuple (min,max) + # @ingroup l1_measurements + def GetMinMax(self, funType, meshPart=None): + unRegister = genObjUnRegister() + if isinstance( meshPart, list ): + meshPart = self.GetIDSource( meshPart, SMESH.ALL ) + unRegister.set( meshPart ) + if isinstance( meshPart, Mesh ): + meshPart = meshPart.mesh + fun = self._getFunctor( funType ) + if fun: + if meshPart: + if hasattr( meshPart, "SetMesh" ): + meshPart.SetMesh( self.mesh ) # set mesh to filter + hist = fun.GetLocalHistogram( 1, False, meshPart ) + else: + hist = fun.GetHistogram( 1, False ) + if hist: + return hist[0].min, hist[0].max + return None pass # end of Mesh class + +## class used to compensate change of CORBA API of SMESH_Mesh for backward compatibility +# with old dump scripts which call SMESH_Mesh directly and not via smeshBuilder.Mesh +# +class meshProxy(SMESH._objref_SMESH_Mesh): + def __init__(self): + SMESH._objref_SMESH_Mesh.__init__(self) + def __deepcopy__(self, memo=None): + new = self.__class__() + return new + def CreateDimGroup(self,*args): # 2 args added: nbCommonNodes, underlyingOnly + if len( args ) == 3: + args += SMESH.ALL_NODES, True + return SMESH._objref_SMESH_Mesh.CreateDimGroup( self, *args ) + pass +omniORB.registerObjref(SMESH._objref_SMESH_Mesh._NP_RepositoryId, meshProxy) + +## class used to compensate change of CORBA API of SMESH_MeshEditor for backward compatibility +# with old dump scripts which call SMESH_MeshEditor directly and not via smeshBuilder.Mesh +# +class meshEditor(SMESH._objref_SMESH_MeshEditor): + def __init__(self): + SMESH._objref_SMESH_MeshEditor.__init__(self) + self.mesh = None + def __getattr__(self, name ): # method called if an attribute not found + if not self.mesh: # look for name() method in Mesh class + self.mesh = Mesh( None, None, SMESH._objref_SMESH_MeshEditor.GetMesh(self)) + if hasattr( self.mesh, name ): + return getattr( self.mesh, name ) + if name == "ExtrusionAlongPathObjX": + return getattr( self.mesh, "ExtrusionAlongPathX" ) # other method name + print "meshEditor: attribute '%s' NOT FOUND" % name + return None + def __deepcopy__(self, memo=None): + new = self.__class__() + return new + def FindCoincidentNodes(self,*args): # a 2nd arg added (SeparateCornerAndMediumNodes) + if len( args ) == 1: args += False, + return SMESH._objref_SMESH_MeshEditor.FindCoincidentNodes( self, *args ) + def FindCoincidentNodesOnPart(self,*args): # a 3d arg added (SeparateCornerAndMediumNodes) + if len( args ) == 2: args += False, + return SMESH._objref_SMESH_MeshEditor.FindCoincidentNodesOnPart( self, *args ) + def MergeNodes(self,*args): # a 2nd arg added (NodesToKeep) + if len( args ) == 1: + return SMESH._objref_SMESH_MeshEditor.MergeNodes( self, args[0], [] ) + NodesToKeep = args[1] + unRegister = genObjUnRegister() + if NodesToKeep: + if isinstance( NodesToKeep, list ) and isinstance( NodesToKeep[0], int ): + NodesToKeep = self.MakeIDSource( NodesToKeep, SMESH.NODE ) + if not isinstance( NodesToKeep, list ): + NodesToKeep = [ NodesToKeep ] + return SMESH._objref_SMESH_MeshEditor.MergeNodes( self, args[0], NodesToKeep ) + pass +omniORB.registerObjref(SMESH._objref_SMESH_MeshEditor._NP_RepositoryId, meshEditor) + ## Helper class for wrapping of SMESH.SMESH_Pattern CORBA class # class Pattern(SMESH._objref_SMESH_Pattern):