X-Git-Url: http://git.salome-platform.org/gitweb/?p=modules%2Fsmesh.git;a=blobdiff_plain;f=src%2FSMESHGUI%2FSMESH_msg_en.ts;h=cdbcfc114831ebd04ae8867dfd6cc02bc9e6f11d;hp=f36fa04c73407e4dfb3cdac33b23121bf1192587;hb=HEAD;hpb=30628bd54b2932ebfaae2ae2c24af7f173c4970e diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts index f36fa04c7..7d40dd113 100644 --- a/src/SMESHGUI/SMESH_msg_en.ts +++ b/src/SMESHGUI/SMESH_msg_en.ts @@ -95,6 +95,10 @@ BARE_BORDER_VOLUME Volumes with bare border + + SCALED_JACOBIAN + Scaled Jacobian + OVER_CONSTRAINED_VOLUME Over-constrained volumes @@ -111,6 +115,10 @@ ASPECTRATIO_3D_ELEMENTS Aspect Ratio 3D + + WARPING_3D_ELEMENTS + Warping 3D + ASPECTRATIO_ELEMENTS Aspect Ratio @@ -186,7 +194,7 @@ EDITERR_NO_MEDIUM_ON_GEOM Some medium nodes not placed on geometry to avoid - distorting elements shown in magenta + distorting elements shown in magenta. SMESH_GEOM @@ -292,6 +300,10 @@ MEN_COPY_MESH Copy Mesh + + MEN_CREATE_DUAL_MESH + Create Dual Mesh + MEN_CLIP Clipping @@ -304,6 +316,14 @@ MEN_COMPUTE Compute + + MEN_RE_COMPUTE + Clear + Compute + + + MEN_SHOW_ERRORS + Show Compute Errors + MEN_COMPUTE_SUBMESH Compute Sub-mesh @@ -328,6 +348,130 @@ MEN_CONSTRUCT_GROUP Construct Group + + MEN_MG_ADAPT + Remesh with MG_Adapt + + + MEN_HOMARD_ADAPT + Uniform refinement + + + Args + Arguments + + + MeshOut + Mesh Out + + + MeshIn + Mesh In + + + MEDFile + MED file + + + Browser + Browser + + + Publish_MG_ADAPT + Publish + + + SIZE_MAP_FIELD + Size map field + + + MG_ADAPT_FIELD_NAME + Field Name + + + MG_ADAPT_MED_FILE_1 + This MED file cannot be read. + + + MG_ADAPT_MED_FILE_2 + No mesh in this MED file. + + + MG_ADAPT_MED_FILE_3 + More than one mesh in this MED file. + + + MG_ADAPT_MED_FILE_4 + The mesh in this MED file cannot be read. + + + MG_ADAPT_MED_FILE_5 + No field in this MED file. + + + MG_ADAPT_ERROR + Error + + + MG_ADAPT_CH_ST + Chosen time step + + + MG_ADAPT_RANK + Rank + + + MG_ADAPT_TSTP + Time step + + + MG_ADAPT_NO_T_ST + No time step + + + MG_ADAPT_L_ST + Last time step + + + MeshName + Mesh name + + + LOCAL_MG_ADAPT + Local + + + BACKGRND_MG_ADAPT + Background + + + CNST_MG_ADAPT + Constant + + + MED_FILE_BCKG + MED file background size map + + + VALUE_MG_ADAPT + Value + + + SIZE_MAP_DEF + Size map definition + + + ADVOP + Advanced Options + + + MG_ADAPT_DIAG_1 + Adaptation succeeded. + + + MG_ADAPT_DIAG_2 + Adaptation failed. + MEN_CONV_TO_QUAD Convert to/from quadratic @@ -336,6 +480,10 @@ MEN_2D_FROM_3D Create boundary elements + + MEN_2D_FROM_3D_ELEMENTS + Create 2D mesh from 3D elements + MEN_MESH_ORDER Change sub-mesh priority @@ -516,10 +664,6 @@ MEN_EXPORT_GMF Export to GMF file - - MEN_EXPORT_SAUV - Export to SAUV file - MEN_EXPORT_STL Export to STL file @@ -745,12 +889,12 @@ GMF file - MEN_IMPORT_SAUV - SAUV file + MEN_IMPORT_MESHIO + other formats... (meshio) - MEN_SAUV - SAUV file + MEN_EXPORT_MESHIO + other formats... (meshio) MEN_MERGE @@ -768,6 +912,18 @@ MEN_MESH_THROU_POINT Move Node + + MEN_MOVE_NODE_INTRCT + Move node by mouse + + + MEN_SPLIT_DIAG_INTRC + Add node on segment + + + MEN_SPLIT_FACE_INTRC + Add node to triangle + MEN_MIN_ANG Minimum Angle @@ -776,6 +932,10 @@ MEN_MODIFY Modification + + MEN_ADAPT + Adaptation + MEN_MEASURE Measurements @@ -844,6 +1004,18 @@ TOP_MEASURE_VOLUME Volume + + MEN_MEASURE_ANGLE + Angle + + + STB_MEASURE_ANGLE + Measure angle defined by three nodes + + + TOP_MEASURE_ANGLE + Angle + MEN_MOVE Move Node @@ -944,6 +1116,10 @@ MEN_REMOVE_NODES Nodes + + MEN_REMOVE_NODE_RECON + Node with reconnection + MEN_REMOVE_ORPHAN_NODES Orphan Nodes @@ -978,7 +1154,7 @@ MEN_SAVE_DISTRIBUTION - Export ... + Export the distribution... MEN_SHOW_DISTRIBUTION @@ -1140,6 +1316,10 @@ MEN_UNDERLYING_ELEMS Group based on nodes of other groups + + MEN_FACE_GROUPS_BY_EDGES + Face groups separated by sharp edges + MEN_UPDATE Update @@ -1156,10 +1336,18 @@ MEN_VOLUME_3D Volume + + MEN_SCALED_JACOBIAN + Scaled Jacobian + MEN_WARP Warping Angle + + MEN_WARP_3D + Warping 3D + MEN_WHAT_IS Mesh Element Information @@ -1462,6 +1650,14 @@ Please enter correct values and try again SMESH_AUTO_DIM Automatically define space dimension + + SMESH_MED_SAVE_NUMS + Export indices + + + SMESH_ZTOLERANCE + Z tolerance + SMESH_REQUIRED_GROUPS Create groups of required entities @@ -1470,6 +1666,10 @@ Please enter correct values and try again SMESH_AVAILABLE Available + + SMESH_NOT_AVAILABLE + Not available + SMESH_AVAILABLE_ALGORITHMS Available algorithms @@ -1776,7 +1976,12 @@ so that the application may crash. Do you wish to continue visualization? SMESH_EXPORT_FAILED Mesh export failed. -Probably, there is not enough space on disk. +Probably, there is not enough space on disk, or the version of MED file used is not compatible with the mesh. + + + + SMESH_EXPORT_FAILED_SHORT + Mesh export failed. SMESH_EXPORT_MED_DUPLICATED_GRP @@ -1796,13 +2001,6 @@ Do you want to continue? SMESH_EXPORT_ONLY_GPOUP You are going to export the group without its mesh. Do you want to continue? - - - SMESH_EXPORT_MED_V2_1 - During export mesh with name - "%1" to MED 2.1 -polygons and polyhedrons elements will be missed -For correct export use MED 2.2 -Are you sure want to export to MED 2.1? SMESH_EXPORT_MED_VERSION_COLLISION @@ -1816,6 +2014,22 @@ Overwrite the file? meshes with the following names: %1 The result file may be incorrect. Overwrite the file? + + + SMESH_EXPORT_MESHIO_ONLY_MESH + Current implementation uses export through intermediate MED file. +However, meshio does not support reading MED files with more than one mesh. +Selected meshes will be saved into separated files. + +Do you want to continue? + + + SMESH_MESHIO_NOT_INSTALLED + Meshio is not installed! +Operation will be canceled. + +Try to install meshio with a command: +pip install meshio[all] EXPORT_NOT_SUPPORTED @@ -1829,15 +2043,15 @@ Do you want to continue? SMESH_EXTRUSION_TO_DISTANCE - Extrusion To Distance + Extrusion to distance SMESH_EXTRUSION_ALONG_VECTOR - Extrusion Along Vector + Extrusion along vector SMESH_EXTRUSION_BY_NORMAL - Extrusion By Normal + Extrusion by normal SMESH_FACE @@ -1922,7 +2136,7 @@ add the exported data to its contents? Height: - SMESH_HEXAS + SMESH_HEXAHEDRON Hexahedron @@ -1941,6 +2155,14 @@ add the exported data to its contents? SMESH_HYPOTHESES Hypotheses + + SMESH_HYPOTHESIS + Hypothesis + + + SMESH_ALGORITHM + Algorithm + SMESH_HYP_1 Algorithm misses a hypothesis @@ -2050,6 +2272,14 @@ Check algorithm documentation for supported geometry SMESH_LOGARITHMIC_SCALARBAR Logarithmic + + SMESH_TRESHOLD_SCALARBAR + Threshold + + + SMESH_WIREFRAME_OFF_SCALARBAR + Wireframe Off + SMESH_MAKE_GROUPS Generate groups @@ -2266,6 +2496,10 @@ Check algorithm documentation for supported geometry SMESH_NAME Name + + SMESH_NAMES + Names + SMESH_NODES Nodes @@ -2674,6 +2908,10 @@ Check algorithm documentation for supported geometry SMESH_RENUMBERING Renumbering + + SMESH_RENUMBER + Renumber + SMESH_RENUMBERING_ELEMENTS_TITLE Renumbering elements @@ -2760,7 +2998,7 @@ Check algorithm documentation for supported geometry Symmetry - SMESH_TETRAS + SMESH_TETRAHEDRON Tetrahedron @@ -2859,6 +3097,86 @@ Check algorithm documentation for supported geometry SMESH_MULTICOLOR Multicolor + + ADAPT_PREF_TAB_GENERAL + Adaptation + + + ADAPT_PREF_NONE + None + + + ADAPT_WITH_HOMARD + Adaptation with HOMARD + + + ADAPT_PREF_MG_ADAPT + Adaptation with MG-Adapt + + + ADAPT_PREF_MG_ADAPT_FILE_MAILLAGE_OUT + Write the OUT mesh + + + ADAPT_PREF_MG_ADAPT_PUBLICATION_MAILLAGE_OUT + Publication of the OUT mesh + + + OPTION_VALUE_COLUMN + Option + + + OPTION_NAME_COLUMN + Value + + + compute_ridges + Compute ridges + + + max_memory + Maximum memory (Mb) + + + Adaption + adaptation + + + components + Components + + + ADAPT_PREF_MG_ADAPT_SIZE_MAP + Size map + + + ADAPT_PREF_MG_ADAPT_SIZE_MAP_LOCAL + Local + + + ADAPT_PREF_MG_ADAPT_SIZE_MAP_BACKGROUND + Background + + + ADAPT_PREF_MG_ADAPT_TIME_STEP_LAST + Last + + + ADAPT_PREF_MG_ADAPT_TIME_STEP + Choosen time step + + + ADAPT_PREF_MG_ADAPT_TIME_STEP_C + Value + + + MG_ADAPT_SELECT_FILE_0 + MG-ADAPT select file + + + ADAPT_PREF_MG_ADAPT_ADVOP + Advanced Options + SMESH_VISU_PROBLEM Mesh visualization failed @@ -2982,6 +3300,10 @@ Use Display Entity menu command to show them. SMESH_Z Z + + SMESH_Z_SCALARBAR + Z: + STATE_ALGO_MISSING %3 %2D algorithm is missing @@ -3038,6 +3360,10 @@ Use Display Entity menu command to show them. STB_COPY_MESH Copy Mesh + + STB_CREATE_DUAL_MESH + Create Dual Mesh + STB_CLIP Clipping @@ -3050,6 +3376,10 @@ Use Display Entity menu command to show them. STB_COMPUTE Compute + + STB_RE_COMPUTE + Clear + Compute + STB_COMPUTE_SUBMESH Compute Sub-mesh @@ -3074,6 +3404,14 @@ Use Display Entity menu command to show them. STB_CONSTRUCT_GROUP Construct Group + + STB_MG_ADAPT + Remesh with MG_Adapt + + + STB_HOMARD_ADAPT + Uniform refinement + STB_CONV_TO_QUAD Convert to/from quadratic @@ -3082,6 +3420,10 @@ Use Display Entity menu command to show them. STB_2D_FROM_3D Create boundary elements + + STB_2D_FROM_3D_ELEMENTS + Create 2D mesh from 3D elements + STB_MESH_ORDER Change sub-mesh priority @@ -3210,10 +3552,6 @@ Use Display Entity menu command to show them. STB_EXPORT_GMF Export to GMF file - - STB_EXPORT_SAUV - Export to SAUV file - STB_EXPORT_STL Export to STL file @@ -3346,14 +3684,6 @@ Use Display Entity menu command to show them. STB_GMF Export GMF file - - STB_IMPORT_SAUV - Import SAUV file - - - STB_SAUV - Export SAUV file - STB_MERGE Merge nodes @@ -3366,6 +3696,18 @@ Use Display Entity menu command to show them. STB_MESH_THROU_POINT Move Node + + STB_MOVE_NODE_INTRCT + Move Node by mouse + + + STB_SPLIT_DIAG_INTRC + Add node on segment + + + STB_SPLIT_FACE_INTRC + Add node to triangle + STB_MIN_ANG Minimum Angle @@ -3454,6 +3796,10 @@ Use Display Entity menu command to show them. STB_REMOVE_NODES Remove nodes + + STB_REMOVE_NODE_RECON + Remove node with reconnection + STB_REMOVE_ORPHAN_NODES Remove orphan nodes @@ -3602,6 +3948,10 @@ Use Display Entity menu command to show them. STB_UNDERLYING_ELEMS Create groups of entities basing on nodes of other groups + + STB_FACE_GROUPS_BY_EDGES + Create face groups separated by sharp edges + STB_UPDATE Update @@ -3614,10 +3964,18 @@ Use Display Entity menu command to show them. STB_VOLUME_3D Volume + + STB_SCALED_JACOBIAN + Scaled Jacobian + STB_WARP Warping angle + + STB_WARP_3D + Warping angle + STB_WHAT_IS Show information about the mesh node or element @@ -3646,6 +4004,10 @@ Use Display Entity menu command to show them. TB_RENUMBER Renumbering Toolbar + + TB_INTERACT + Interactive modifications Toolbar + TB_TRANSFORM Transformation Toolbar @@ -3666,6 +4028,10 @@ Use Display Entity menu command to show them. TB_CTRL3D Volume Controls Toolbar + + TB_ADAPTATION + Adaptation Toolbar + TB_MEASUREM Measurements Toolbar @@ -3746,6 +4112,10 @@ Use Display Entity menu command to show them. TOP_COMPUTE Compute + + TOP_RE_COMPUTE + Clear + Compute + TOP_COMPUTE_SUBMESH Compute Sub-mesh @@ -3770,6 +4140,14 @@ Use Display Entity menu command to show them. TOP_CONSTRUCT_GROUP Construct Group + + TOP_MG_ADAPT + Remesh with MG_Adapt + + + TOP_HOMARD_ADAPT + Uniform refinement + TOP_CONV_TO_QUAD Convert to/from quadratic @@ -3778,6 +4156,10 @@ Use Display Entity menu command to show them. TOP_2D_FROM_3D Create boundary elements + + TOP_2D_FROM_3D_ELEMENTS + Create 2D mesh from 3D elements + TOP_MESH_ORDER Change sub-mesh priority @@ -3898,10 +4280,6 @@ Use Display Entity menu command to show them. TOP_EXPORT_MED Export to MED file - - TOP_EXPORT_SAUV - Export to SAUV file - TOP_EXPORT_STL Export to STL file @@ -4034,14 +4412,6 @@ Use Display Entity menu command to show them. TOP_GMF Export GMF file - - TOP_IMPORT_SAUV - Import SAUV file - - - TOP_SAUV - Export SAUV file - TOP_MERGE Merge nodes @@ -4054,6 +4424,18 @@ Use Display Entity menu command to show them. TOP_MESH_THROU_POINT Move Node + + TOP_MOVE_NODE_INTRCT + Move node by mouse + + + TOP_SPLIT_DIAG_INTRC + Add node on segment + + + TOP_SPLIT_FACE_INTRC + Add node to triangle + TOP_MIN_ANG Minimum Angle @@ -4142,6 +4524,10 @@ Use Display Entity menu command to show them. TOP_REMOVE_NODES Remove nodes + + TOP_REMOVE_NODE_RECON + Remove node with reconnection + TOP_REMOVE_ORPHAN_NODES Remove orphan nodes @@ -4286,6 +4672,10 @@ Use Display Entity menu command to show them. TOP_UNDERLYING_ELEMS Create groups of entities basing on nodes of other groups + + TOP_FACE_GROUPS_BY_EDGES + Create groups of faces separated by sharp edges + TOP_UPDATE Update @@ -4298,10 +4688,18 @@ Use Display Entity menu command to show them. TOP_VOLUME_3D Volume + + TOP_SCALED_JACOBIAN + Scaled Jacobian + TOP_WARP Warping angle + + TOP_WARP_3D + Warping 3D + TOP_WHAT_IS Mesh Element Information @@ -4326,9 +4724,13 @@ Use Display Entity menu command to show them. WARP_ELEMENTS Warping + + WARP_3D_ELEMENTS + Warping 3D + MEN_FILE_INFO - MED File Information + File Information SMESH_WRN_NO_APPROPRIATE_SELECTION @@ -4397,8 +4799,8 @@ Use Display Entity menu command to show them. FULL_RECOMPUTE_QUESTION -The mesh has been edited since a last total re-compute -that may prevent successful computation. +The mesh has been edited since a last total re-compute +that may prevent successful computation. Do you wish to re-compute the mesh totally to discard the modifications? @@ -4465,6 +4867,24 @@ It can't be deleted STB_SORT_CHILD_ITEMS Sort child items + + MEN_BREAK_SHAPER_LINK + Break link + + + STB_BREAK_SHAPER_LINK + Break link with Shaper model + + + MSG_BREAK_SHAPER_LINK + A link with Shaper model for object %1 will be broken. +Continue? + + + MSG_WARN_ON_GEOM_MODIF + This action is prohibited since the geometry +was changed and the mesh needs to be recomputed. + SMESH_ADVANCED Advanced @@ -4513,14 +4933,41 @@ It can't be deleted SMESH_3D_ALGO_GROUP_ADVANCED Advanced - - + + SMESH_HEX_PRISM + Hexagonal Prism + + + SMESHGUI_FieldSelectorWdg FIELDS_TO_EXPORT Export Fields + + SMESHGUI_FaceGroupsSeparatedByEdgesDlg + + CAPTION + Face groups separated by sharp edges + + + SHARP_ANGLE + Sharp angle + + + CREATE_EDGES + Create edges + + + USE_EXISTING_EDGES + Use existing edges + + + NB_GROUPS_CREATED + %1 group(s) of faces created + + SMESHGUI_OffsetDlg @@ -4578,6 +5025,14 @@ Please, create VTK viewer and try again PREF_SHOW_WARN Show warning when exporting group + + PREF_MED_SAVE_NUMS + Save cell/node numbers to MED file + + + PREF_ZTOLERANCE + Z tolerance for MED export + PREF_GROUP_SEGMENT_LENGTH Automatic parameters @@ -4590,6 +5045,10 @@ Please, create VTK viewer and try again PREF_NB_SEGMENTS Default Number of Segments + + PREF_USE_MESHGEMS_HYPOSET + Use MeshGems meshers when assigning set of hypotheses + SMESH_PREF_MESH_LOADING Mesh loading @@ -4672,12 +5131,16 @@ Please, create VTK viewer and try again PREF_DISPLAY_MODE_GROUP - Display mode + Display PREF_DISPLAY_MODE Default display mode + + PREF_FITALL_ON_DISPLAYONLY + Fit All upon Show Only + PREF_ELEMENTS Elements @@ -4830,6 +5293,10 @@ Please, create VTK viewer and try again PREF_OBJECTS Objects + + PREF_SELECTION_INCREMENT + Elements width increment + PREF_OBJECT_COLOR Object color @@ -4922,6 +5389,74 @@ Please, create VTK viewer and try again PREF_PREVIEW_CHUNK_SIZE Sub-shapes preview chunk size + + INFO_WELCOME_TO_SMESH + Welcome to Mesh + + + INFO_GRP_CREATE_MESH + Create mesh + + + INFO_DEFINE_ALGOS + Choose algorithms + + + INFO_DEFINE_HYPOS + Define hypotheses + + + INFO_COMPUTE + Compute + + + INFO_REFINE + Add refinements + + + INFO_REFINE_LOCAL_SIZE + via local sizes with some hypotheses + + + INFO_REFINE_SUBMESH + via sub-meshes + + + INFO_GRP_IMPORT_MESH + Import mesh + + + INFO_AVAILABLE_FORMATS + Available formats + + + INFO_GRP_CHECK_MESH + Check mesh quality + + + INFO_DISPLAY + Display mesh + + + INFO_QUALITY_INFO + Display some quality criteria + + + INFO_QUALITY_AREA + area + + + INFO_QUALITY_VOLUME + volume + + + INFO_QUALITY_ASPECT_RATION + aspect ration + + + INFO_CLIPPING + Add clipping planes + SMESHGUI_GroupDlg @@ -5049,6 +5584,14 @@ Please, create VTK viewer and try again MESHES Meshes, sub-meshes, groups + + NEW_MESH_NAME + Create new mesh named + + + MESH_APPEND_TO + Append to mesh + PROCESSING_IDENTICAL_GROUPS Processing identical groups @@ -5059,7 +5602,7 @@ Please, create VTK viewer and try again RESULT_NAME - Result name + Result UNITE @@ -5228,6 +5771,29 @@ Please specify it and try again Warning: mesh can become non-conformal + + SMESHGUI_CreateDualMeshDlg + + CAPTION + Create Dual Mesh + + + MESH + Mesh or Sub-mesh + + + NON_TETRA_MESH_WARNING + Warning: mesh must have only Tetrahedron 3D elements + + + DUAL_MESH_NAME + Name of the dual mesh + + + PROJ_SHAPE + Project boundary elements on shape + + SMESHGUI_ConvToQuadOp @@ -5413,6 +5979,10 @@ Please select a group and try again KEEP_NODES Nodes to keep during the merge + + KEEP_ELEMENTS + Elements to keep during the merge + GROUP_SUBMESH Groups and sub-meshes @@ -5432,18 +6002,6 @@ Please select a group and try again CANT_GET_TANGENT Can't get tangent for one of the path nodes - - EXTRUSION_0D - Extrusion of 0D elements - - - EXTRUSION_1D - Extrusion of 1D elements - - - EXTRUSION_2D - Extrusion of 2D elements - EXTRUSION_ALONG_PATH Extrusion along a path @@ -5454,7 +6012,7 @@ Please select a group and try again LINEAR_ANGLES - Linear variation of the angles + Linear variation of angles NO_ELEMENTS_SELECTED @@ -5466,11 +6024,19 @@ Please select a group and try again SMESH_ANGLES - Rotation Angles + Rotation angles SMESH_BASE_POINT - Base Point + Base point + + + SMESH_SCALES + Scale factors + + + LINEAR_SCALES + Linear variation of factors SMESH_PATH @@ -5490,11 +6056,11 @@ Please select a group and try again SMESH_USE_ANGLES - Use Angles + Use angles SMESH_USE_BASE_POINT - Use Base Point + Use base point WRONG_ANGLES_NUMBER @@ -5503,18 +6069,6 @@ Please select a group and try again SMESHGUI_ExtrusionDlg - - EXTRUSION_0D - Extrusion of nodes - - - EXTRUSION_1D - Extrusion of 1D elements - - - EXTRUSION_2D - Extrusion of 2D elements - EXTRUSION_ALONG_LINE Extrusion along a line @@ -5529,15 +6083,23 @@ Please select a group and try again SMESH_SCALES - Scale Factors + Scale factors LINEAR_SCALES - Linear Variation of Scale Factors + Linear variation of factors BASE_POINT - Scaling Center + Base point + + + LINEAR_ANGLES + Linear variation of angles + + + SMESH_ANGLES + Rotation angles @@ -5783,6 +6345,10 @@ Please check input data and try again ASPECT_RATIO_3D Aspect ratio 3D + + WARPING_3D + Warping 3D + BAD_ORIENTED_VOLUME Bad oriented volume @@ -5920,6 +6486,10 @@ Please enter correct value and try again LENGTH2D Length 2D + + LENGTH3D + Length 3D + DEFLECTION2D Deflection 2D @@ -6006,6 +6576,10 @@ Please enter correct value and try again VOLUME_3D Volume + + SCALED_JACOBIAN + Scaled Jacobian + WARPING Warping @@ -6314,6 +6888,10 @@ Please specify them and try again DESTINATION Destination + + DESTINATION_BY_MOUSE + Destination by mouse click + MOVE_NODE Move node @@ -6342,6 +6920,120 @@ Please specify them and try again Mesh to modify not selected + + SMESHGUI_AddNodeOnSegmentDlg + + CAPTION + Add node to segment + + + SEGMENT_GROUP + Edge between neighboring triangles + + + SEGMENT + Edge + + + POSITION_GROUP + Node on Edge + + + POSITION + Location by mouse click + + + + SMESHGUI_AddNodeOnSegmentOp + + INVALID_EDGE + Edge is invalid + + + INVALID_MESH + Mesh to modify not selected + + + NO_ELEMENTS + Edge belongs to none face + + + VOLUME_FOUND + Can't split an edge of a volume + + + NOT_TRIANGLE_FACE_FOUND + Operation applies to triangles only + + + BAD_POSITION + Position on edge is incorrect + + + + SMESHGUI_AddNodeOnFaceDlg + + CAPTION + Add node to triangle + + + FACE_GROUP + Triangle to split + + + FACE_ID + ID + + + XYZ_GROUP + Node location by mouse click + + + XYZ_NODE_ON_FACE + Node on face + + + + SMESHGUI_AddNodeOnFaceOp + + INVALID_MESH + Mesh to modify not selected + + + NOT_FACE + Not a face selected + + + INVALID_ID + Face ID is invalid + + + + SMESHGUI_RemoveNodeReconnectionDlg + + CAPTION + Remove Node with Reconnection + + + NODE_2REMOVE_ID + ID + + + NODE_2REMOVE + Node + + + + SMESHGUI_RemoveNodeReconnectionOp + + INVALID_ID + Node ID is invalid + + + INVALID_MESH + Mesh to modify not selected + + SMESHGUI_FindElemByPointDlg @@ -6417,7 +7109,7 @@ Please specify them and try again HYPOTHESES_SETS - Assign a set of hypotheses + Assign a set of automatic hypotheses MESH @@ -6431,6 +7123,10 @@ Please specify them and try again NAME Name + + CREATE_ALL_GROUPS + Create all Groups on Geometry + SMESHGUI_MeshOp @@ -6450,7 +7146,7 @@ Please specify them and try again GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH Geometry object is not defined. -Do you want to create an empty mesh +Do you want to create an empty mesh without algorithms and hypotheses? @@ -6524,8 +7220,8 @@ select mesh or sub-mesh and try again CONCURRENT_SUBMESH_APPEARS - -The assigned algorithm has the same priority as one assigned to an + +The assigned algorithm has the same priority as one assigned to an adjacent sub-mesh, hence it's undefined which algorithm to use for meshing boundary shared by two sub-meshes. Would you like to set the order of sub-mesh computation? @@ -7272,6 +7968,17 @@ It is impossible to read point coordinates from file Generate + + SMESHGUI_MakeFull2DFrom3DDlg + + CAPTION + Create 2D mesh from 3D elements + + + 2D_FROM_3D_ELEMENTS + 2D from 3D + + SMESHGUI_Make2DFrom3DDlg @@ -7323,6 +8030,43 @@ It is impossible to read point coordinates from file Create group + + SMESHGUI_MakeFull2DFrom3DOp + + NB_ADDED + %1 boundary elements have been added + + + WRONG_GROUPS + The following groups have not been processed +as they are of improper type: +%1 + + + SMESH_ERR_NO_INPUT_MESH + Source mesh is not specified + + + SMESH_TOO_MANY_MESHES + Only one mesh can be processed at once + + + SMESH_NOT_ONLY_GROUPS + Can't process meshes and groups at once + + + SMESH_ERR_NO_3D_ELEMENTS + The source objects do not contain 3D elements + + + SMESH_ERR_MESH_NAME_NOT_SPECIFIED + New mesh name is not specified + + + SMESH_ERR_GRP_NAME_NOT_SPECIFIED + Group name is not specified + + SMESHGUI_Make2DFrom3DOp @@ -7365,7 +8109,7 @@ as they are of improper type: - SMESHGUI_MeshInfo + SMESHGUI_BaseInfo BASE_INFO Base information @@ -7494,6 +8238,18 @@ as they are of improper type: OBJECT_GROUP_BALLS Group of balls + + OBJECT_GROUP_STANDALONE + (standalone) + + + OBJECT_GROUP_GEOM + (on geometry) + + + OBJECT_GROUP_FILTER + (on filter) + BUT_LOAD_MESH Load mesh from server @@ -7529,6 +8285,10 @@ as they are of improper type: ELEM_MODE Element + + GROUP_MODE + Group + SHOW_IDS Show IDs @@ -7560,6 +8320,10 @@ as they are of improper type: COORDINATES Coordinates + + NB_NODES + Nb nodes + CONNECTIVITY Connectivity @@ -7858,6 +8622,18 @@ as they are of improper type: FILE_NAME File name + + FILE_SIZE + Size + + + FILE_VERSION + Version + + + VERSION_UNKNOWN + Unknown + STANDALONE_MESH Standalone @@ -8055,6 +8831,21 @@ as they are of improper type: Compute + + SMESHGUI_Angle + + NODES_GROUP + Three nodes + + + RESULT + Angle in degrees + + + COMPUTE + Compute + + SMESHGUI_CopyMeshDlg @@ -8069,6 +8860,29 @@ as they are of improper type: NEW_NAME New Mesh Name + + NEW_GEOM + New Geometry + + + REUSE_HYPOTHESES + Reuse Hypotheses + + + COPY_ELEMENTS + Copy Mesh Elements + + + OPERATION_FAILED + Not all mesh sub-objects have been copied + + + SUBSHAPES_NOT_FOUND_MSG + +Some sub-shapes not found in the new geometry. They are listed +below along with dependent mesh objects that are marked with +red in the Object Browser. + SMESHGUI_MeasureDlg @@ -8088,6 +8902,10 @@ as they are of improper type: BASIC_PROPERTIES Basic Properties + + ANGLE + Angle + SMESHGUI_BoundingBox @@ -8160,6 +8978,10 @@ as they are of improper type: OBJECT Object + + OBJECTS + Objects + POINT Point @@ -8180,6 +9002,10 @@ as they are of improper type: VOLUMES Volumes + + REF_GROUPS + Ref. objects (optional) + OUTSIDE_VOLUME_NORMAL Face normal outside volume @@ -8321,4 +9147,19 @@ as they are of improper type: Option value + + SMESHGUI_GenericHypothesisCreator + + AverageLengthForHypoSet + Mean Size + + + + SMESHGUI_SpinBoxForbiddendRange + + VALID_RANGE_NOVAR_MSG + Specify a floating-point value in range [%1; %2) U (%3; %4] +with %5-digit precision + +