X-Git-Url: http://git.salome-platform.org/gitweb/?p=modules%2Fsmesh.git;a=blobdiff_plain;f=src%2FSMESHGUI%2FSMESHGUI.cxx;h=f638d0391b8722e5ca7be3470c7fdd2a7d138a2b;hp=259b5d8b1b02c9a2418f3a4972b3369382d968ad;hb=19720c1ef8ed1ff65a87ae63b7fff432b924b2f3;hpb=ec2b6eb2fb72bce2449d1c0eeb24ad157e571eab diff --git a/src/SMESHGUI/SMESHGUI.cxx b/src/SMESHGUI/SMESHGUI.cxx index 259b5d8b1..f638d0391 100644 --- a/src/SMESHGUI/SMESHGUI.cxx +++ b/src/SMESHGUI/SMESHGUI.cxx @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2020 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -40,20 +40,26 @@ #include "SMESHGUI_CopyMeshDlg.h" #include "SMESHGUI_CreatePolyhedralVolumeDlg.h" #include "SMESHGUI_DeleteGroupDlg.h" +#include "SMESHGUI_DisplayEntitiesDlg.h" #include "SMESHGUI_Displayer.h" #include "SMESHGUI_DuplicateNodesDlg.h" #include "SMESHGUI_ExtrusionAlongPathDlg.h" #include "SMESHGUI_ExtrusionDlg.h" +#include "SMESHGUI_FaceGroupsSeparatedByEdgesDlg.h" #include "SMESHGUI_FieldSelectorWdg.h" #include "SMESHGUI_FileInfoDlg.h" #include "SMESHGUI_FileValidator.h" #include "SMESHGUI_FilterDlg.h" #include "SMESHGUI_FilterLibraryDlg.h" +#include "SMESHGUI_FilterUtils.h" #include "SMESHGUI_FindElemByPointDlg.h" +#include "SMESHGUI_GEOMGenUtils.h" #include "SMESHGUI_GroupDlg.h" #include "SMESHGUI_GroupOnShapeDlg.h" #include "SMESHGUI_GroupOpDlg.h" +#include "SMESHGUI_GroupUtils.h" #include "SMESHGUI_Hypotheses.h" +#include "SMESHGUI_HypothesesUtils.h" #include "SMESHGUI_Make2DFrom3DOp.h" #include "SMESHGUI_MakeNodeAtPointDlg.h" #include "SMESHGUI_Measurements.h" @@ -62,9 +68,12 @@ #include "SMESHGUI_MeshOp.h" #include "SMESHGUI_MeshOrderOp.h" #include "SMESHGUI_MeshPatternDlg.h" +#include "SMESHGUI_MeshUtils.h" #include "SMESHGUI_MultiEditDlg.h" #include "SMESHGUI_NodesDlg.h" +#include "SMESHGUI_OffsetDlg.h" #include "SMESHGUI_Operations.h" +#include "SMESHGUI_PatternUtils.h" #include "SMESHGUI_Preferences_ScalarBarDlg.h" #include "SMESHGUI_PropertiesDlg.h" #include "SMESHGUI_RemoveElementsDlg.h" @@ -74,65 +83,53 @@ #include "SMESHGUI_RevolutionDlg.h" #include "SMESHGUI_RotationDlg.h" #include "SMESHGUI_ScaleDlg.h" -#include "SMESHGUI_OffsetDlg.h" #include "SMESHGUI_Selection.h" #include "SMESHGUI_SewingDlg.h" #include "SMESHGUI_SingleEditDlg.h" #include "SMESHGUI_SmoothingDlg.h" +#include "SMESHGUI_SpinBox.h" +#include "SMESHGUI_SplitBiQuad.h" #include "SMESHGUI_SymmetryDlg.h" #include "SMESHGUI_TranslationDlg.h" #include "SMESHGUI_TransparencyDlg.h" -#include "SMESHGUI_DisplayEntitiesDlg.h" -#include "SMESHGUI_SplitBiQuad.h" - -#include "SMESHGUI_FilterUtils.h" -#include "SMESHGUI_GEOMGenUtils.h" -#include "SMESHGUI_GroupUtils.h" -#include "SMESHGUI_HypothesesUtils.h" -#include "SMESHGUI_MeshUtils.h" -#include "SMESHGUI_PatternUtils.h" #include "SMESHGUI_Utils.h" #include "SMESHGUI_VTKUtils.h" #include "SMESH_version.h" -#include "SMESH_ControlsDef.hxx" #include "SMESH_Actor.h" #include "SMESH_ActorUtils.h" #include "SMESH_Client.hxx" +#include "SMESH_Comment.hxx" +#include "SMESH_ControlsDef.hxx" #include "SMESH_ScalarBarActor.h" #include "SMESH_TypeFilter.hxx" // SALOME GUI includes -#include -#include -#include -#include -#include - #include #include #include #include #include - -#include -#include -#include - -#include - +#include +#include +#include #include #include #include #include #include #include - -#include -#include - -#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include #ifndef DISABLE_PLOT2DVIEWER #include @@ -149,13 +146,13 @@ // Qt includes // #define INCLUDE_MENUITEM_DEF // VSR commented ???????? #include +#include +#include +#include +#include #include #include -#include #include -#include -#include -#include // BOOST includes #include @@ -175,6 +172,7 @@ #include #include #include "utilities.h" +#include // OCCT includes #include @@ -491,17 +489,11 @@ namespace QDialogButtonBox* btnbox = msgBox.findChild(); lt->addWidget(&dontShowCheckBox, lt->rowCount(), lt->columnCount()-1, lt->rowCount(), lt->columnCount()); lt->addWidget(btnbox, lt->rowCount(), 0, lt->rowCount(), lt->columnCount()); - if(msgBox.exec() == QMessageBox::Ok) - { - if(dontShowCheckBox.checkState() == Qt::Checked) - { - if ( resMgr ) - resMgr->setValue( "SMESH", "show_warning", false); - } - aCheckWarn = false; - } - else + if ( msgBox.exec() != QMessageBox::Ok ) return; + + if ( dontShowCheckBox.checkState() == Qt::Checked && resMgr ) + resMgr->setValue( "SMESH", "show_warning", false); } QString aMeshName = anIObject->getName(); @@ -550,7 +542,7 @@ namespace } } } - + // Warn the user about presence of not supported elements QString format; std::vector< SMESH::EntityType > notSupportedElemTypes, presentNotSupported; @@ -655,6 +647,9 @@ namespace // Get parameters of export operation QString aFilename; + int aFormat =-1; // for MED version used for write + bool isOkToWrite = true; // to check MED file version compatibility before adding a mesh in an existing file + // Init the parameters with the default values bool aIsASCII_STL = true; bool toCreateGroups = false; @@ -662,6 +657,7 @@ namespace toCreateGroups = resMgr->booleanValue( "SMESH", "auto_groups", false ); bool toOverwrite = true; bool toFindOutDim = true; + double zTol = resMgr ? resMgr->doubleValue( "SMESH", "med_ztolerance", 0. ) : 0.; QString aFilter, aTitle = QObject::tr("SMESH_EXPORT_MESH"); QString anInitialPath = ""; @@ -670,7 +666,7 @@ namespace QList< QPair< GEOM::ListOfFields_var, QString > > aFieldList; - // Get a file name to write in and additional otions + // Get a file name to write in and additional options if ( isUNV || isDAT || isGMF ) // Export w/o options { if ( isUNV ) @@ -706,7 +702,7 @@ namespace if ( fd->exec() ) aFilename = fd->selectedFile(); - toOverwrite = fv->isOverwrite(); + toOverwrite = fv->isOverwrite(aFilename); toCreateGroups = fd->IsChecked(0); SMESHGUI::resourceMgr()->setValue("SMESH", theByTypeResource, toCreateGroups ); @@ -741,14 +737,34 @@ namespace } else if ( isMED || isSAUV ) // Export to MED or SAUV { - QStringList filters; + int defaultVersion = 0; + QMap aFilterMap; if ( isMED ) { - filters << QObject::tr( "MED_FILES_FILTER" ) + " (*.med)"; + //filters << QObject::tr( "MED_FILES_FILTER" ) + " (*.med)"; + //QString vmed (aMesh->GetVersionString(-1, 2)); + SMESH::long_array_var mvok = aMesh->GetMEDVersionsCompatibleForAppend(); + if ( mvok->length() > 0) + defaultVersion = mvok[0]; // the current version to set the default filter on it + for ( CORBA::ULong i = 0; i < mvok->length(); ++i ) + { + QString vs = (char*)( SMESH_Comment( mvok[i]/10 ) << "." << mvok[i]%10 ); + MESSAGE("MED version: " << vs.toStdString()); + aFilterMap.insert( QObject::tr( "MED_VX_FILES_FILTER" ).arg( vs ) + " (*.med)", mvok[i]); + } } else { // isSAUV - filters << QObject::tr( "SAUV_FILES_FILTER" ) + " (*.sauv *.sauve)"; + aFilterMap.insert("All files (*)", -1 ); + aFilterMap.insert("SAUV files (*.sauv)", defaultVersion ); // 0 = default filter (defaultVersion) + aFilterMap.insert("SAUV files (*.sauve)", -1 ); + } + QStringList filters; + QMap::const_iterator it = aFilterMap.begin(); + QString aDefaultFilter = it.key(); + for ( ; it != aFilterMap.end(); ++it ) { + filters.push_back( it.key() ); + if (it.value() == defaultVersion) // explicit default for MED = current MED version + aDefaultFilter = it.key(); } - QStringList checkBoxes; checkBoxes << QObject::tr("SMESH_AUTO_GROUPS") << QObject::tr("SMESH_AUTO_DIM"); @@ -757,17 +773,32 @@ namespace if ( fieldSelWdg->GetAllFields( aMeshList, aFieldList )) wdgList.append( fieldSelWdg ); + QWidget* zTolWdg = new QWidget(); + QCheckBox* zTolCheck = new QCheckBox( QObject::tr( "SMESH_ZTOLERANCE" ), zTolWdg ); + SMESHGUI_SpinBox* zTolSpin = new SMESHGUI_SpinBox( zTolWdg ); + QHBoxLayout* zTolLayout = new QHBoxLayout( zTolWdg ); + zTolLayout->addWidget( zTolCheck ); + zTolLayout->addWidget( zTolSpin ); + zTolLayout->setMargin( 0 ); + zTolSpin->RangeStepAndValidator( 0, 1e+100, 1., "length_precision" ); + zTolSpin->setValue( zTol ); + QObject::connect( zTolCheck, SIGNAL( toggled(bool)), zTolSpin, SLOT( setEnabled(bool))); + zTolCheck->setChecked( resMgr->booleanValue( "SMESH", "enable_ztolerance", false )); + zTolSpin ->setEnabled( zTolCheck->isChecked() ); + wdgList.append( zTolWdg ); + SalomeApp_CheckFileDlg* fd = new SalomeApp_CheckFileDlg ( SMESHGUI::desktop(), false, checkBoxes, true, true, wdgList ); fd->setWindowTitle( aTitle ); fd->setNameFilters( filters ); + fd->selectNameFilter( aDefaultFilter ); fd->SetChecked( toCreateGroups, 0 ); fd->SetChecked( toFindOutDim, 1 ); if ( !anInitialPath.isEmpty() ) fd->setDirectory( anInitialPath ); fd->selectFile(aMeshName); - - + + QListView *lview = fd->findChild("listView"); if( lview ) { lview->setMinimumHeight(200); @@ -781,19 +812,26 @@ namespace fd->setValidator( fv ); bool is_ok = false; - while (!is_ok) { + while (!is_ok) + { + //MESSAGE("******* Loop on file dialog ***********"); + isOkToWrite =true; if ( fd->exec() ) aFilename = fd->selectedFile(); else { aFilename = QString::null; break; } - toOverwrite = fv->isOverwrite(); + aFormat = aFilterMap[fd->selectedNameFilter()]; + //MESSAGE("selected version: " << aFormat << " file: " << aFilename.toUtf8().constData()); + toOverwrite = fv->isOverwrite(aFilename); + //MESSAGE("toOverwrite:" << toOverwrite); is_ok = true; if ( !aFilename.isEmpty() ) { if( !toOverwrite ) { - // can't append to an existing using other format - bool isVersionOk = SMESHGUI::GetSMESHGen()->CheckCompatibility( aFilename.toUtf8().constData() ); + // append is only possible if the existing file format is compatible + bool isVersionOk = SMESHGUI::GetSMESHGen()->CheckWriteCompatibility( aFilename.toUtf8().constData() ); + MESSAGE("Append check, isVersionOk:" << isVersionOk); if ( !isVersionOk ) { int aRet = SUIT_MessageBox::warning(SMESHGUI::desktop(), QObject::tr("SMESH_WRN_WARNING"), @@ -801,11 +839,17 @@ namespace QObject::tr("SMESH_BUT_YES"), QObject::tr("SMESH_BUT_NO"), 0, 1); if (aRet == 0) + { toOverwrite = true; + //MESSAGE("incompatible MED file version for add, overwrite accepted"); + } else + { + isOkToWrite = false; is_ok = false; + //MESSAGE("incompatible MED file version for add, overwrite refused"); + } } - QStringList aMeshNamesCollisionList; SMESH::string_array_var aMeshNames = SMESHGUI::GetSMESHGen()->GetMeshNames( aFilename.toUtf8().constData() ); for( int i = 0, n = aMeshNames->length(); i < n; i++ ) { @@ -819,6 +863,7 @@ namespace } } if( !aMeshNamesCollisionList.isEmpty() ) { + isOkToWrite = false; QString aMeshNamesCollisionString = aMeshNamesCollisionList.join( ", " ); int aRet = SUIT_MessageBox::warning(SMESHGUI::desktop(), QObject::tr("SMESH_WRN_WARNING"), @@ -826,8 +871,11 @@ namespace QObject::tr("SMESH_BUT_YES"), QObject::tr("SMESH_BUT_NO"), QObject::tr("SMESH_BUT_CANCEL"), 0, 2); - if (aRet == 0) + MESSAGE("answer collision name " << aRet); + if (aRet == 0) { toOverwrite = true; + isOkToWrite = true; + } else if (aRet == 2) is_ok = false; } @@ -836,9 +884,14 @@ namespace } toCreateGroups = fd->IsChecked(0); toFindOutDim = fd->IsChecked(1); + zTol = zTolCheck->isChecked() ? zTolSpin->value() : -1; fieldSelWdg->GetSelectedFields(); + if ( resMgr ) resMgr->setValue( "SMESH", "enable_ztolerance", zTolCheck->isChecked() ); + if ( !fieldSelWdg->parent() ) delete fieldSelWdg; + if ( !zTolWdg->parent() ) + delete zTolWdg; delete fd; } else @@ -857,19 +910,20 @@ namespace try { // Renumbering is not needed since SMDS redesign in V6.2.0 (Nov 2010) -// bool Renumber = false; -// // PAL 14172 : Check of we have to renumber or not from the preferences before export -// if (resMgr) -// Renumber= resMgr->booleanValue("renumbering"); -// if (Renumber){ -// SMESH::SMESH_MeshEditor_var aMeshEditor = aMesh->GetMeshEditor(); + // bool Renumber = false; + // // PAL 14172 : Check of we have to renumber or not from the preferences before export + // if (resMgr) + // Renumber= resMgr->booleanValue("renumbering"); + // if (Renumber){ + // SMESH::SMESH_MeshEditor_var aMeshEditor = aMesh->GetMeshEditor(); // aMeshEditor->RenumberNodes(); // aMeshEditor->RenumberElements(); // if ( SMESHGUI::automaticUpdate() ) // SMESH::UpdateView(); // } - if ( isMED ) + if ( isMED && isOkToWrite) { + MESSAGE("OK to write MED file "<< aFilename.toUtf8().constData()); aMeshIter = aMeshList.begin(); for( int aMeshIndex = 0; aMeshIter != aMeshList.end(); aMeshIter++, aMeshIndex++ ) { @@ -878,13 +932,14 @@ namespace const GEOM::ListOfFields& fields = aFieldList[ aMeshIndex ].first.in(); const QString& geoAssFields = aFieldList[ aMeshIndex ].second; const bool hasFields = ( fields.length() || !geoAssFields.isEmpty() ); - if ( !hasFields && aMeshOrGroup->_is_equivalent( aMeshItem )) - aMeshItem->ExportMED( aFilename.toUtf8().data(), toCreateGroups, + if ( !hasFields && aMeshOrGroup->_is_equivalent( aMeshItem ) && zTol < 0 ) + aMeshItem->ExportMED( aFilename.toUtf8().data(), toCreateGroups, aFormat, toOverwrite && aMeshIndex == 0, toFindOutDim ); else - aMeshItem->ExportPartToMED( aMeshOrGroup, aFilename.toUtf8().data(), toCreateGroups, + aMeshItem->ExportPartToMED( aMeshOrGroup, aFilename.toUtf8().data(), + toCreateGroups, aFormat, toOverwrite && aMeshIndex == 0, toFindOutDim, - fields, geoAssFields.toLatin1().data() ); + fields, geoAssFields.toLatin1().data(), zTol ); } } else if ( isSAUV ) @@ -940,7 +995,7 @@ namespace wc.suspend(); SUIT_MessageBox::warning(SMESHGUI::desktop(), QObject::tr("SMESH_WRN_WARNING"), - QObject::tr("SMESH_EXPORT_FAILED")); + QObject::tr("SMESH_EXPORT_FAILED") + SalomeApp_Tools::ExceptionToString(S_ex)); wc.resume(); } } @@ -1328,6 +1383,108 @@ namespace } } + // Break link with Shaper model + void breakShaperLink() + { + LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr(); + SALOME_ListIO selected; + if (aSel) { + aSel->selectedObjects(selected); + if (selected.Extent()) { + Handle(SALOME_InteractiveObject) anIObject = selected.First(); + _PTR(Study) aStudy = SMESH::getStudy(); + std::string aEntry = anIObject->getEntry(); + _PTR(SObject) aSObj = aStudy->FindObjectID(aEntry); + if (aSObj) { + std::string aName = aSObj->GetName(); + QMessageBox::StandardButton aRes = SUIT_MessageBox::warning(SMESHGUI::desktop(), + QObject::tr("SMESH_WRN_WARNING"), + QObject::tr("MSG_BREAK_SHAPER_LINK").arg(aName.c_str()), + SUIT_MessageBox::Yes | SUIT_MessageBox::No, SUIT_MessageBox::No); + if (aRes == SUIT_MessageBox::Yes) { + SUIT_DataOwnerPtrList aList; + aSel->selected(aList, "ObjectBrowser", true); + SUIT_DataOwner* aOwn = aList.first(); + LightApp_DataOwner* sowner = dynamic_cast(aOwn); + QString aREntry = sowner->entry(); + + static GEOM::GEOM_Gen_var geomGen; + if (CORBA::is_nil(geomGen)) { + SalomeApp_Application* app = dynamic_cast + (SUIT_Session::session()->activeApplication()); + if (app) { + SALOME_LifeCycleCORBA* ls = new SALOME_LifeCycleCORBA(app->namingService()); + Engines::EngineComponent_var comp = + ls->FindOrLoad_Component("FactoryServer", "SHAPERSTUDY"); + geomGen = GEOM::GEOM_Gen::_narrow(comp); + } + } + if (!CORBA::is_nil(geomGen)) + { + geomGen->BreakLink(aREntry.toStdString().c_str()); + SMESHGUI::GetSMESHGUI()->updateObjBrowser(); + + // remove actors whose objects are removed by BreakLink() + QList wndList = SMESHGUI::desktop()->windows(); + SUIT_ViewWindow* wnd; + foreach(wnd, wndList) + SMESH::UpdateActorsAfterUpdateStudy(wnd); + } + } + } + } + } + } + + //================================================================================ + /*! + * \brief Return true if a mesh icon == ICON_SMESH_TREE_GEOM_MODIF + * which means that the mesh can't be modified. It should be either re-computed + * or breakShaperLink()'ed. Warn the user about it. + */ + //================================================================================ + + bool warnOnGeomModif() + { + SALOME_ListIO selected; + if ( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() ) + aSel->selectedObjects(selected,"",/*convertReferences=*/false); + + SALOME_ListIteratorOfListIO It( selected ); + for ( ; It.More(); It.Next() ) + { + Handle(SALOME_InteractiveObject) io = It.Value(); + if ( !io->hasEntry() ) continue; + _PTR(SObject) so = SMESH::getStudy()->FindObjectID( io->getEntry() ); + SMESH::SMESH_Mesh_var mesh; + while ( mesh->_is_nil() && so && so->GetID() != "0:" ) + { + CORBA::Object_var obj = SMESH::SObjectToObject( so ); + SMESH::SMESH_IDSource_var isrc = SMESH::SMESH_IDSource::_narrow( obj ); + if ( isrc->_is_nil() ) + so = so->GetFather(); + else + mesh = isrc->GetMesh(); + } + if ( mesh->_is_nil() ) continue; + so = SMESH::FindSObject( mesh ); + if ( !so ) continue; + _PTR(GenericAttribute) attr; + so->FindAttribute( attr, "AttributePixMap" ); + _PTR(AttributePixMap) pixmap = attr; + if ( !pixmap ) continue; + + if ( pixmap->GetPixMap() == "ICON_SMESH_TREE_GEOM_MODIF" ) + { + SUIT_MessageBox::warning(SMESHGUI::desktop(), + QObject::tr("SMESH_WRN_WARNING"), + QObject::tr("MSG_WARN_ON_GEOM_MODIF")); + return true; + } + } + return false; + } + void SetDisplayMode(int theCommandID, VTK::MarkerMap& theMarkerMap) { SALOME_ListIO selected; @@ -1442,7 +1599,7 @@ namespace presentEntities = presentEntities | SMESH_Actor::e0DElements; if ( !(presentEntities & SMESH_Actor::eBallElem) && anActor->GetObject()->GetNbEntities( SMDSAbs_Ball ) ) presentEntities = presentEntities | SMESH_Actor::eBallElem; - + // as we know that all types of elements are present, we can exit the loop if ( presentEntities == SMESH_Actor::eAllEntity ) break; @@ -1480,7 +1637,7 @@ namespace dlg.setShrinkCoef( int( shrinkCoef * 100. ) ); // hide unused controls dlg.showControls( presentEntities, hasNodes ); - + if ( dlg.exec() ) { nodeColor = dlg.nodeColor(); markerType = dlg.nodeMarkerType(); @@ -1514,7 +1671,7 @@ namespace if ( !IObject->hasEntry() ) continue; SMESH_Actor* anActor = SMESH::FindActorByEntry( IObject->getEntry() ); if ( !anActor ) continue; - + // nodes: color, marker anActor->SetNodeColor( nodeColor.redF(), nodeColor.greenF(), nodeColor.blueF() ); if ( markerType != VTK::MT_USER ) { @@ -1559,17 +1716,17 @@ namespace aColor = nodeColor; break; case SMESH::EDGE: aColor = edgeColor; break; - case SMESH::FACE: + case SMESH::FACE: aColor = faceColor; break; case SMESH::VOLUME: aColor = volumeColor; break; - case SMESH::ELEM0D: + case SMESH::ELEM0D: aColor = elem0dColor; break; - case SMESH::BALL: + case SMESH::BALL: aColor = ballColor; break; default: break; } - + if ( aColor.isValid() ) { SALOMEDS::Color aGroupColor; aGroupColor.R = aColor.redF(); @@ -1696,7 +1853,7 @@ namespace int anEntitiesCount = anActor->GetNumberControlEntities(); if (anEntitiesCount >= 0) functorName = functorName + ": " + QString::number(anEntitiesCount); - anActor->GetScalarBarActor()->SetTitle( functorName.toLatin1().constData() ); + anActor->GetScalarBarActor()->SetTitle( functorName.toUtf8().constData() ); SMESH::RepaintCurrentView(); #ifndef DISABLE_PLOT2DVIEWER if ( anActor->GetPlot2Histogram() ) { @@ -1794,7 +1951,7 @@ namespace v = qMax( uint(0), qMin ( v, size-1 ) ); return v; } - + } //namespace void SMESHGUI::OnEditDelete() @@ -1808,6 +1965,7 @@ void SMESHGUI::OnEditDelete() _PTR(GenericAttribute) anAttr; _PTR(AttributeIOR) anIOR; + const int objectCountLimit = 30; // PAL23599 int objectCount = 0; QString aNameList; QString aParentComponent = QString::null; @@ -1817,29 +1975,33 @@ void SMESHGUI::OnEditDelete() Handle(SALOME_InteractiveObject) anIO = anIt.Value(); if ( anIO.IsNull() ) continue; - QString father = "unknown"; + QString father = "unknown", name; _PTR(SObject) aSO = aStudy->FindObjectID( anIO->getEntry() ); if (aSO) { father = QString::fromStdString( aSO->GetFatherComponent()->ComponentDataType() ); // check if object is reference _PTR(SObject) aRefSObj; - aNameList.append("\n - "); if ( aSO->ReferencedObject( aRefSObj ) ) { - QString aRefName = QString::fromStdString ( aRefSObj->GetName() ); - aNameList.append( aRefName ); + name = QString::fromStdString ( aRefSObj->GetName() ); father = QString::fromStdString ( aRefSObj->GetFatherComponent()->ComponentDataType() ); } else - aNameList.append(anIO->getName()); + name = anIO->getName(); objectCount++; } + if ( objectCount < objectCountLimit ) { // avoid occupying the whole screen + aNameList.append("\n - "); + aNameList.append( name ); + } if( aParentComponent.isNull() ) aParentComponent = father; else if( !aParentComponent.isEmpty() && aParentComponent!=father ) aParentComponent = ""; } + if ( objectCount >= objectCountLimit ) + aNameList.append("\n - ..."); if ( objectCount == 0 ) return; // No Valid Objects Selected @@ -1861,8 +2023,8 @@ void SMESHGUI::OnEditDelete() SalomeApp_Application* anApp = dynamic_cast( SUIT_Session::session()->activeApplication() ); - // Put the whole hierarchy of sub-objects of the selected SO's into a list and - // then treat them all starting from the deepest objects (at list back) + // Put one level of sub-objects of the selected SO's into a list + // in order to get objects inside folders like "Assigned Algorithms" std::list< _PTR(SObject) > listSO; SALOME_ListIteratorOfListIO It(selected); for( ; It.More(); It.Next()) // loop on selected IO's @@ -1883,43 +2045,47 @@ void SMESHGUI::OnEditDelete() aSO = aRefSObject; // Delete main Object instead of reference listSO.push_back( aSO ); - std::list< _PTR(SObject) >::iterator itSO = --listSO.end(); - for ( ; itSO != listSO.end(); ++itSO ) { - _PTR(ChildIterator) it = aStudy->NewChildIterator( *itSO ); - for (it->InitEx(false); it->More(); it->Next()) - listSO.push_back( it->Value() ); - } + + _PTR(ChildIterator) it = aStudy->NewChildIterator( aSO ); + for (it->InitEx(false); it->More(); it->Next()) + listSO.push_back( it->Value() ); } } // Check if none of objects to delete is referred from outside std::list< _PTR(SObject) >::reverse_iterator ritSO; + std::vector< _PTR(SObject) > subSO; for ( ritSO = listSO.rbegin(); ritSO != listSO.rend(); ++ritSO ) { _PTR(SObject) SO = *ritSO; if ( !SO ) continue; - std::vector<_PTR(SObject)> aReferences = aStudy->FindDependances( *ritSO ); - for (size_t i = 0; i < aReferences.size(); i++) { - _PTR(SComponent) aComponent = aReferences[i]->GetFatherComponent(); - std::string type = aComponent->ComponentDataType(); - if ( type != "SMESH" ) - { - SUIT_MessageBox::warning( anApp->desktop(), - QObject::tr("WRN_WARNING"), - QObject::tr("DEP_OBJECT") ); - return; // outside SMESH, there is an object depending on a SMESH object + + int nbChildren = SO->GetLastChildTag(); + subSO.clear(); + subSO.reserve( 1 + nbChildren ); + subSO.push_back( SO ); + if ( nbChildren > 0 ) + { + _PTR(ChildIterator) it = aStudy->NewChildIterator( SO ); + for ( it->InitEx( true ); it->More(); it->Next() ) + subSO.push_back( it->Value() ); + } + for ( size_t i = 0; i < subSO.size(); ++i ) + { + std::vector<_PTR(SObject)> aReferences = aStudy->FindDependances( subSO[i] ); + for ( size_t j = 0; j < aReferences.size(); j++ ) { + _PTR(SComponent) aComponent = aReferences[j]->GetFatherComponent(); + std::string type = aComponent->ComponentDataType(); + if ( type != "SMESH" ) + { + SUIT_MessageBox::warning( anApp->desktop(), + QObject::tr("WRN_WARNING"), + QObject::tr("DEP_OBJECT") ); + return; // outside SMESH, there is an object depending on a SMESH object + } } } } - // Call mesh->Clear() to prevent loading mesh from file caused by hypotheses removal - for( It.Initialize( selected ); It.More(); It.Next()) // loop on selected IO's - { - Handle(SALOME_InteractiveObject) IObject = It.Value(); - SMESH::SMESH_Mesh_var mesh = SMESH::IObjectToInterface< SMESH::SMESH_Mesh >( IObject ); - if ( !mesh->_is_nil() ) - mesh->Clear(); - } - // Treat SO's in the list starting from the back aStudyBuilder->NewCommand(); // There is a transaction for ( ritSO = listSO.rbegin(); ritSO != listSO.rend(); ++ritSO ) @@ -1929,7 +2095,7 @@ void SMESHGUI::OnEditDelete() std::string anEntry = SO->GetID(); /** Erase graphical object and remove all its data **/ - if(SO->FindAttribute(anAttr, "AttributeIOR")) { + if ( SO->FindAttribute( anAttr, "AttributeIOR" )) { SMESH::RemoveVisualObjectWithActors( anEntry.c_str(), true); } /** Remove an object from data structures **/ @@ -2088,20 +2254,20 @@ bool SMESHGUI::automaticUpdate( SMESH::SMESH_IDSource_ptr theMesh, SMESH::long_array_var info = theMesh->GetMeshInfo(); long nbOdElems = info[SMDSEntity_0D]; long nbEdges = info[SMDSEntity_Edge] + info[SMDSEntity_Quad_Edge]; - long nbFaces = info[SMDSEntity_Triangle] + info[SMDSEntity_Quad_Triangle] + info[SMDSEntity_BiQuad_Triangle] + - info[SMDSEntity_Quadrangle] + info[SMDSEntity_Quad_Quadrangle] + info[SMDSEntity_BiQuad_Quadrangle] + + long nbFaces = info[SMDSEntity_Triangle] + info[SMDSEntity_Quad_Triangle] + info[SMDSEntity_BiQuad_Triangle] + + info[SMDSEntity_Quadrangle] + info[SMDSEntity_Quad_Quadrangle] + info[SMDSEntity_BiQuad_Quadrangle] + info[SMDSEntity_Polygon] + info[SMDSEntity_Quad_Polygon]; - long nbVolumes = info[SMDSEntity_Tetra] + info[SMDSEntity_Quad_Tetra] + - info[SMDSEntity_Hexa] + info[SMDSEntity_Quad_Hexa] + info[SMDSEntity_TriQuad_Hexa] + - info[SMDSEntity_Pyramid] + info[SMDSEntity_Quad_Pyramid] + + long nbVolumes = info[SMDSEntity_Tetra] + info[SMDSEntity_Quad_Tetra] + + info[SMDSEntity_Hexa] + info[SMDSEntity_Quad_Hexa] + info[SMDSEntity_TriQuad_Hexa] + + info[SMDSEntity_Pyramid] + info[SMDSEntity_Quad_Pyramid] + info[SMDSEntity_Penta] + info[SMDSEntity_Quad_Penta] + info[SMDSEntity_BiQuad_Penta] + - info[SMDSEntity_Polyhedra] + + info[SMDSEntity_Polyhedra] + info[SMDSEntity_Hexagonal_Prism]; long nbBalls = info[SMDSEntity_Ball]; long requestedSize = nbOdElems + nbBalls + nbEdges + nbFaces + nbVolumes; *nbElements = requestedSize; - + *entities = SMESH_Actor::eAllEntity; *hidden = 0; @@ -2482,6 +2648,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) #ifndef DISABLE_PLOT2DVIEWER SMESH::ProcessIn2DViewers(anActor,SMESH::RemoveFrom2dViewer); #endif + anActor->UpdateFilter(); } } } @@ -2668,6 +2835,10 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) else aSel->setSelectedObjects( to_process ); + if ( vtkwnd && vtkwnd->GetRenderer() && !isStudyLocked() && + ( theCommandID==SMESHOp::OpShow || theCommandID==SMESHOp::OpShowOnly ) ) + vtkwnd->GetRenderer()->AdjustActors(); + break; } @@ -2686,18 +2857,37 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) break; } - case SMESHOp::OpCreateMesh: - case SMESHOp::OpCreateSubMesh: case SMESHOp::OpEditMeshOrSubMesh: case SMESHOp::OpEditMesh: case SMESHOp::OpEditSubMesh: + case SMESHOp::OpMeshOrder: + case SMESHOp::OpCreateSubMesh: + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified + + case SMESHOp::OpCreateMesh: case SMESHOp::OpCompute: case SMESHOp::OpComputeSubMesh: case SMESHOp::OpPreCompute: case SMESHOp::OpEvaluate: - case SMESHOp::OpMeshOrder: + case SMESHOp::OpShowErrors: startOperation( theCommandID ); break; + case SMESHOp::OpRecompute: + { + if ( isStudyLocked() ) + break; + SALOME_ListIO selected; + if ( LightApp_SelectionMgr *sel = selectionMgr() ) + sel->selectedObjects( selected ); + if ( selected.Extent() == 1 ) { + SMESH::SMESH_Mesh_var aMesh = SMESH::GetMeshByIO( selected.First() ); + if ( !aMesh->_is_nil() ) + aMesh->Clear(); + startOperation( SMESHOp::OpCompute ); + } + } + break; case SMESHOp::OpCopyMesh: { if (isStudyLocked()) break; @@ -2724,6 +2914,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if ( isStudyLocked() ) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified /*Standard_Boolean aRes; SMESH::SMESH_Mesh_var aMesh = SMESH::IObjectToInterface(IObject); @@ -2754,6 +2946,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if ( isStudyLocked() ) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified EmitSignalDeactivateDialog(); SMESHGUI_MultiEditDlg* aDlg = NULL; @@ -2772,6 +2966,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpSmoothing: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_SmoothingDlg( this ) )->show(); @@ -2784,6 +2980,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpExtrusion: { if (isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if (vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_ExtrusionDlg ( this ) )->show(); @@ -2795,6 +2993,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpExtrusionAlongAPath: { if (isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if (vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_ExtrusionAlongPathDlg( this ) )->show(); @@ -2806,6 +3006,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpRevolution: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RevolutionDlg( this ) )->show(); @@ -2819,6 +3021,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if ( isStudyLocked() ) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); @@ -2835,6 +3039,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpReorientFaces: case SMESHOp::OpCreateGeometryGroup: { + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified startOperation( theCommandID ); break; } @@ -2847,6 +3053,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) } if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified EmitSignalDeactivateDialog(); SMESH::SMESH_Mesh_var aMesh = SMESH::SMESH_Mesh::_nil(); @@ -2874,6 +3082,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) } if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified EmitSignalDeactivateDialog(); LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr(); @@ -2951,6 +3161,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) } if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified EmitSignalDeactivateDialog(); LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr(); @@ -3048,6 +3260,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) if ( isStudyLocked() ) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified EmitSignalDeactivateDialog(); @@ -3068,6 +3282,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) { if ( isStudyLocked() ) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified EmitSignalDeactivateDialog(); SMESHGUI_GroupOpDlg* aDlg = new SMESHGUI_DimGroupDlg( this ); @@ -3076,6 +3292,20 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) break; } + case SMESHOp::OpFaceGroupsByEdges: // Create face groups separated by sharp edges + { + if ( isStudyLocked() ) + break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified + + EmitSignalDeactivateDialog(); + SMESHGUI_FaceGroupsSeparatedByEdgesDlg* aDlg = new SMESHGUI_FaceGroupsSeparatedByEdgesDlg( this ); + aDlg->show(); + + break; + } + case SMESHOp::OpDeleteGroup: // Delete groups with their contents { if ( !vtkwnd ) @@ -3107,7 +3337,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) SALOME_ListIteratorOfListIO It( selected ); for ( ; It.More(); It.Next() ) { SMESHGUI_MeshInfoDlg* dlg = new SMESHGUI_MeshInfoDlg( SMESHGUI::desktop(), page ); - dlg->showInfo( It.Value() ); + dlg->showInfo( It.Value() ); dlg->show(); } } @@ -3127,6 +3357,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpEditHypothesis: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr(); SALOME_ListIO selected; @@ -3172,6 +3404,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpUnassign: // REMOVE HYPOTHESIS / ALGORITHMS { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified SUIT_OverrideCursor wc; LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr(); @@ -3203,6 +3437,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpHexagonalPrism: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); SMDSAbs_EntityType type = SMDSEntity_Edge; @@ -3229,6 +3465,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpPolyhedron: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_CreatePolyhedralVolumeDlg( this ) )->show(); @@ -3252,6 +3490,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpTriQuadraticHexahedron: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); SMDSAbs_EntityType type = SMDSEntity_Last; @@ -3283,6 +3523,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpRemoveNodes: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RemoveNodesDlg( this ) )->show(); @@ -3296,6 +3538,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpRemoveElements: // REMOVES ELEMENTS { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RemoveElementsDlg( this ) )->show(); @@ -3310,6 +3554,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpClearMesh: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified SALOME_ListIO selected; if( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() ) @@ -3349,6 +3595,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpRemoveOrphanNodes: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified SALOME_ListIO selected; if( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() ) aSel->selectedObjects( selected ); @@ -3388,6 +3636,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpRenumberingNodes: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RenumberingDlg( this, 0 ) )->show(); @@ -3402,6 +3652,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpRenumberingElements: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RenumberingDlg( this, 1 ) )->show(); @@ -3416,6 +3668,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpTranslation: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_TranslationDlg( this ) )->show(); @@ -3429,6 +3683,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpRotation: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_RotationDlg( this ) )->show(); @@ -3442,6 +3698,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpSymmetry: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if(vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_SymmetryDlg( this ) )->show(); @@ -3455,6 +3713,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpScale: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_ScaleDlg( this ) )->show(); @@ -3469,6 +3729,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpOffset: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_OffsetDlg( this ) )->show(); @@ -3483,6 +3745,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpSewing: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if(vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_SewingDlg( this ) )->show(); @@ -3496,6 +3760,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpMergeNodes: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if(vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_MergeDlg( this, 0 ) )->show(); @@ -3509,6 +3775,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpMergeElements: { if (isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if (vtkwnd) { EmitSignalDeactivateDialog(); ( new SMESHGUI_MergeDlg( this, 1 ) )->show(); @@ -3520,12 +3788,16 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) } case SMESHOp::OpMoveNode: // MAKE MESH PASS THROUGH POINT + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified startOperation( SMESHOp::OpMoveNode ); break; case SMESHOp::OpDuplicateNodes: { if(isStudyLocked()) break; + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified if ( vtkwnd ) { EmitSignalDeactivateDialog(); ( new SMESHGUI_DuplicateNodesDlg( this ) )->show(); @@ -3538,6 +3810,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) } case SMESHOp::OpElem0DOnElemNodes: // 0D_ON_ALL_NODES + if ( warnOnGeomModif() ) + break; // action forbiden as geometry modified startOperation( SMESHOp::OpElem0DOnElemNodes ); break; @@ -3649,6 +3923,7 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpPropertiesVolume: case SMESHOp::OpMinimumDistance: case SMESHOp::OpBoundingBox: + case SMESHOp::OpAngle: { int page = SMESHGUI_MeasureDlg::MinDistance; if ( theCommandID == SMESHOp::OpBoundingBox ) @@ -3659,6 +3934,8 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) page = SMESHGUI_MeasureDlg::Area; else if ( theCommandID == SMESHOp::OpPropertiesVolume ) page = SMESHGUI_MeasureDlg::Volume; + else if ( theCommandID == SMESHOp::OpAngle ) + page = SMESHGUI_MeasureDlg::Angle; EmitSignalDeactivateDialog(); SMESHGUI_MeasureDlg* dlg = new SMESHGUI_MeasureDlg( SMESHGUI::desktop(), page ); @@ -3668,6 +3945,9 @@ bool SMESHGUI::OnGUIEvent( int theCommandID ) case SMESHOp::OpSortChild: ::sortChildren(); break; + case SMESHOp::OpBreakLink: + ::breakShaperLink(); + break; } @@ -3734,7 +4014,7 @@ void SMESHGUI::createSMESHAction( const int id, const QString& po_id, const QStr if ( !icon_id.isEmpty() ) pix = resMgr->loadPixmap( "SMESH", tr( icon_id.toLatin1().data() ) ); else - pix = resMgr->loadPixmap( "SMESH", tr( QString( "ICO_%1" ).arg( po_id ).toLatin1().data() ), false ); + pix = resMgr->loadPixmap( "SMESH", tr( QString( "ICON_%1" ).arg( po_id ).toLatin1().data() ), false ); if ( !pix.isNull() ) icon = QIcon( pix ); @@ -3841,7 +4121,9 @@ void SMESHGUI::initialize( CAM_Application* app ) createSMESHAction( SMESHOp::OpCopyMesh, "COPY_MESH", "ICON_COPY_MESH" ); createSMESHAction( SMESHOp::OpCompute, "COMPUTE", "ICON_COMPUTE" ); createSMESHAction( SMESHOp::OpComputeSubMesh, "COMPUTE_SUBMESH", "ICON_COMPUTE" ); + createSMESHAction( SMESHOp::OpRecompute, "RE_COMPUTE", "ICON_COMPUTE" ); createSMESHAction( SMESHOp::OpPreCompute, "PRECOMPUTE", "ICON_PRECOMPUTE" ); + createSMESHAction( SMESHOp::OpShowErrors, "SHOW_ERRORS", "ICON_SHOW_ERRORS" ); createSMESHAction( SMESHOp::OpEvaluate, "EVALUATE", "ICON_EVALUATE" ); createSMESHAction( SMESHOp::OpMeshOrder, "MESH_ORDER", "ICON_MESH_ORDER"); createSMESHAction( SMESHOp::OpCreateGroup, "CREATE_GROUP", "ICON_CREATE_GROUP" ); @@ -3853,6 +4135,7 @@ void SMESHGUI::initialize( CAM_Application* app ) createSMESHAction( SMESHOp::OpIntersectGroups, "INT_GROUP", "ICON_INTERSECT" ); createSMESHAction( SMESHOp::OpCutGroups, "CUT_GROUP", "ICON_CUT" ); createSMESHAction( SMESHOp::OpGroupUnderlyingElem, "UNDERLYING_ELEMS", "ICON_UNDERLYING_ELEMS" ); + createSMESHAction( SMESHOp::OpFaceGroupsByEdges, "FACE_GROUPS_BY_EDGES", "ICON_FACE_GROUPS_BY_EDGES" ); createSMESHAction( SMESHOp::OpAddElemGroupPopup, "ADD_TO_GROUP" ); createSMESHAction( SMESHOp::OpRemoveElemGroupPopup, "REMOVE_FROM_GROUP" ); createSMESHAction( SMESHOp::OpDeleteGroup, "DEL_GROUP", "ICON_DEL_GROUP" ); @@ -3992,6 +4275,7 @@ void SMESHGUI::initialize( CAM_Application* app ) createSMESHAction( SMESHOp::OpPropertiesLength, "MEASURE_LENGTH", "ICON_MEASURE_LENGTH" ); createSMESHAction( SMESHOp::OpPropertiesArea, "MEASURE_AREA", "ICON_MEASURE_AREA" ); createSMESHAction( SMESHOp::OpPropertiesVolume, "MEASURE_VOLUME", "ICON_MEASURE_VOLUME" ); + createSMESHAction( SMESHOp::OpAngle, "MEASURE_ANGLE", "ICON_MEASURE_ANGLE" ); createSMESHAction( SMESHOp::OpHide, "HIDE", "ICON_HIDE" ); createSMESHAction( SMESHOp::OpShow, "SHOW", "ICON_SHOW" ); @@ -3999,6 +4283,8 @@ void SMESHGUI::initialize( CAM_Application* app ) createSMESHAction( SMESHOp::OpSortChild, "SORT_CHILD_ITEMS" ); + createSMESHAction( SMESHOp::OpBreakLink, "BREAK_SHAPER_LINK" ); + QList aCtrlActions; aCtrlActions << SMESHOp::OpFreeNode << SMESHOp::OpEqualNode << SMESHOp::OpNodeConnectivityNb // node controls @@ -4090,6 +4376,7 @@ void SMESHGUI::initialize( CAM_Application* app ) createMenu( SMESHOp::OpCutGroups, meshId, -1 ); createMenu( separator(), meshId, -1 ); createMenu( SMESHOp::OpGroupUnderlyingElem, meshId, -1 ); + createMenu( SMESHOp::OpFaceGroupsByEdges, meshId, -1 ); createMenu( separator(), meshId, -1 ); createMenu( SMESHOp::OpMeshInformation, meshId, -1 ); //createMenu( SMESHOp::OpStdInfo, meshId, -1 ); @@ -4198,6 +4485,7 @@ void SMESHGUI::initialize( CAM_Application* app ) createMenu( SMESHOp::OpMinimumDistance, measureId, -1 ); createMenu( SMESHOp::OpBoundingBox, measureId, -1 ); + createMenu( SMESHOp::OpAngle, measureId, -1 ); createMenu( SMESHOp::OpPropertiesLength, basicPropId, -1 ); createMenu( SMESHOp::OpPropertiesArea, basicPropId, -1 ); createMenu( SMESHOp::OpPropertiesVolume, basicPropId, -1 ); @@ -4219,8 +4507,8 @@ void SMESHGUI::initialize( CAM_Application* app ) addElemTb = createTool( tr( "TB_ADD" ), QString( "SMESHAddElementToolbar" ) ), addNonElemTb = createTool( tr( "TB_ADDNON" ), QString( "SMESHAddElementToolbar" ) ), remTb = createTool( tr( "TB_REM" ), QString( "SMESHRemoveToolbar" ) ), - //renumbTb = createTool( tr( "TB_RENUMBER" ), QString( "SMESHRenumberingToolbar" ) ), - transformTb = createTool( tr( "TB_TRANSFORM" ), QString( "SMESHTransformationToolbar" ) ), + //renumbTb = createTool( tr( "TB_RENUMBER" ), QString( "SMESHRenumberingToolbar" ) ), + transformTb = createTool( tr( "TB_TRANSFORM" ), QString( "SMESHTransformationToolbar" ) ), modifyTb = createTool( tr( "TB_MODIFY" ), QString( "SMESHModificationToolbar" ) ), measuremTb = createTool( tr( "TB_MEASUREM" ), QString( "SMESHMeasurementsToolbar" ) ), dispModeTb = createTool( tr( "TB_DISP_MODE" ), QString( "SMESHDisplayModeToolbar" ) ); @@ -4389,20 +4677,22 @@ void SMESHGUI::initialize( CAM_Application* app ) hasVolumes("({'Volume'} in elemTypes)"), hasFacesOrVolumes("(({'Face'} in elemTypes) || ({'Volume'} in elemTypes)) "); - createPopupItem( SMESHOp::OpFileInformation, OB, mesh, "&& selcount=1 && isImported" ); - createPopupItem( SMESHOp::OpCreateSubMesh, OB, mesh, "&& hasGeomReference"); createPopupItem( SMESHOp::OpEditMesh, OB, mesh, "&& selcount=1" ); + createPopupItem( SMESHOp::OpCreateSubMesh, OB, mesh, "&& hasGeomReference"); + createPopupItem( SMESHOp::OpMeshOrder, OB, mesh, "&& selcount=1 && hasAlgo && hasGeomReference" ); createPopupItem( SMESHOp::OpEditSubMesh, OB, subMesh, "&& selcount=1 && hasGeomReference" ); createPopupItem( SMESHOp::OpEditGroup, OB, group ); createPopupItem( SMESHOp::OpEditGeomGroupAsGroup, OB, group, "&& groupType != 'Group'" ); popupMgr()->insert( separator(), -1, 0 ); - createPopupItem( SMESHOp::OpCompute, OB, mesh, "&& selcount=1 && isComputable" ); - createPopupItem( SMESHOp::OpComputeSubMesh, OB, subMesh, "&& selcount=1 && isComputable" ); - createPopupItem( SMESHOp::OpPreCompute, OB, mesh, "&& selcount=1 && isPreComputable" ); - createPopupItem( SMESHOp::OpEvaluate, OB, mesh, "&& selcount=1 && isComputable" ); - createPopupItem( SMESHOp::OpMeshOrder, OB, mesh, "&& selcount=1 && isComputable && hasGeomReference" ); - createPopupItem( SMESHOp::OpUpdate, OB, mesh_part ); + createPopupItem( SMESHOp::OpCompute, OB, mesh, "&& selcount=1 && hasAlgo && isComputable" ); + createPopupItem( SMESHOp::OpRecompute, OB, mesh, "&& selcount=1 && hasAlgo && " + isNotEmpty ); + createPopupItem( SMESHOp::OpShowErrors, OB, mesh, "&& selcount=1 && hasErrors" ); + createPopupItem( SMESHOp::OpComputeSubMesh, OB, subMesh, "&& selcount=1 && hasAlgo && isComputable" ); + createPopupItem( SMESHOp::OpPreCompute, OB, mesh, "&& selcount=1 && hasAlgo && isPreComputable" ); + createPopupItem( SMESHOp::OpEvaluate, OB, mesh, "&& selcount=1 && hasAlgo && isComputable" ); + popupMgr()->insert( separator(), -1, 0 ); + createPopupItem( SMESHOp::OpFileInformation, OB, mesh, "&& selcount=1 && isImported" ); createPopupItem( SMESHOp::OpMeshInformation, OB, mesh_part ); createPopupItem( SMESHOp::OpFindElementByPoint,OB, mesh_group, "&& selcount=1" ); createPopupItem( SMESHOp::OpOverallMeshQuality,OB, mesh_part ); @@ -4416,8 +4706,8 @@ void SMESHGUI::initialize( CAM_Application* app ) popupMgr()->insert( separator(), -1, 0 ); createPopupItem( SMESHOp::OpConvertMeshToQuadratic, OB, mesh_submesh ); createPopupItem( SMESHOp::OpCreateBoundaryElements, OB, mesh_group, "&& selcount=1 && dim>=2"); - popupMgr()->insert( separator(), -1, 0 ); - createPopupItem( SMESHOp::OpClearMesh, OB, mesh ); + //popupMgr()->insert( separator(), -1, 0 ); + //popupMgr()->insert( separator(), -1, 0 ); QString only_one_non_empty = QString( " && %1=1 && numberOfNodes>0" ).arg( dc ); @@ -4425,6 +4715,7 @@ void SMESHGUI::initialize( CAM_Application* app ) QString only_one_2D = only_one_non_empty + " && dim>1"; int anId = popupMgr()->insert( tr( "MEN_EXPORT" ), -1, -1 ); // EXPORT submenu + popupMgr()->findMenu( anId )->menuAction()->setIcon( resourceMgr()->loadPixmap( "SMESH", tr( "ICON_EXPORT" ))); createPopupItem( SMESHOp::OpPopupExportMED, OB, mesh_group, multiple_non_empty, anId ); createPopupItem( SMESHOp::OpPopupExportUNV, OB, mesh_group, only_one_non_empty, anId ); createPopupItem( SMESHOp::OpPopupExportSTL, OB, mesh_group, only_one_2D, anId ); @@ -4434,8 +4725,6 @@ void SMESHGUI::initialize( CAM_Application* app ) createPopupItem( SMESHOp::OpPopupExportSAUV, OB, mesh_group, only_one_non_empty, anId ); createPopupItem( SMESHOp::OpPopupExportGMF, OB, mesh_group, only_one_non_empty, anId ); createPopupItem( SMESHOp::OpPopupExportDAT, OB, mesh_group, only_one_non_empty, anId ); - createPopupItem( SMESHOp::OpDelete, OB, mesh_part + " " + hyp_alg ); - createPopupItem( SMESHOp::OpDeleteGroup, OB, group ); anId = popupMgr()->insert( tr( "MEN_IMPORT" ), -1, -1 ); // IMPORT submenu createPopupItem( SMESHOp::OpPopupImportMED, OB, smesh, "", anId ); @@ -4449,18 +4738,22 @@ void SMESHGUI::initialize( CAM_Application* app ) createPopupItem( SMESHOp::OpPopupImportDAT, OB, smesh, "", anId ); popupMgr()->insert( separator(), -1, 0 ); + createPopupItem( SMESHOp::OpClearMesh, OB, mesh ); + createPopupItem( SMESHOp::OpDelete, OB, mesh_part + " " + hyp_alg ); + createPopupItem( SMESHOp::OpDeleteGroup, OB, group ); + // popup for viewer createPopupItem( SMESHOp::OpEditGroup, View, group ); createPopupItem( SMESHOp::OpAddElemGroupPopup, View, elems, "&& guiState = 800" ); createPopupItem( SMESHOp::OpRemoveElemGroupPopup, View, elems, "&& guiState = 800" ); popupMgr()->insert( separator(), -1, 0 ); - createPopupItem( SMESHOp::OpUpdate, View, mesh_part ); createPopupItem( SMESHOp::OpMeshInformation, View, mesh_part ); createPopupItem( SMESHOp::OpOverallMeshQuality, View, mesh_part ); createPopupItem( SMESHOp::OpFindElementByPoint, View, mesh ); popupMgr()->insert( separator(), -1, 0 ); + createPopupItem( SMESHOp::OpUpdate, OB + " " + View, mesh_part ); createPopupItem( SMESHOp::OpAutoColor, OB + " " + View, mesh, "&& (not isAutoColor)" ); createPopupItem( SMESHOp::OpDisableAutoColor, OB + " " + View, mesh, "&& isAutoColor" ); popupMgr()->insert( separator(), -1, 0 ); @@ -4770,6 +5063,9 @@ void SMESHGUI::initialize( CAM_Application* app ) popupMgr()->setRule( action( SMESHOp::OpSortChild ), "$component={'SMESH'} and client='ObjectBrowser' and isContainer and nbChildren>1", QtxPopupMgr::VisibleRule ); popupMgr()->insert( separator(), -1, -1 ); + popupMgr()->insert( action( SMESHOp::OpBreakLink), -1, -1 ); + popupMgr()->setRule( action( SMESHOp::OpBreakLink), "$component={'SHAPERSTUDY'} and client='ObjectBrowser' and canBreakLink", QtxPopupMgr::VisibleRule ); + connect( application(), SIGNAL( viewManagerActivated( SUIT_ViewManager* ) ), this, SLOT( onViewManagerActivated( SUIT_ViewManager* ) ) ); @@ -4795,8 +5091,9 @@ bool SMESHGUI::isSelectionCompatible() SALOME_ListIteratorOfListIO It( selected ); for ( ; isCompatible && It.More(); It.Next()) isCompatible = - ( strcmp("GEOM", It.Value()->getComponentDataType()) == 0 ) || - ( strcmp("SMESH", It.Value()->getComponentDataType()) == 0 ); + ( strcmp("GEOM", It.Value()->getComponentDataType()) == 0 ) || + ( strcmp("SHAPERSTUDY", It.Value()->getComponentDataType()) == 0 ) || + ( strcmp("SMESH", It.Value()->getComponentDataType()) == 0 ); return isCompatible; } @@ -4805,7 +5102,7 @@ bool SMESHGUI::isSelectionCompatible() bool SMESHGUI::reusableOperation( const int id ) { // compute, evaluate and precompute are not reusable operations - return ( id == SMESHOp::OpCompute || id == SMESHOp::OpPreCompute || id == SMESHOp::OpEvaluate ) ? false : SalomeApp_Module::reusableOperation( id ); + return ( id == SMESHOp::OpCompute || id == SMESHOp::OpPreCompute || id == SMESHOp::OpEvaluate || id == SMESHOp::OpRecompute ) ? false : SalomeApp_Module::reusableOperation( id ); } bool SMESHGUI::activateModule( SUIT_Study* study ) @@ -4843,7 +5140,14 @@ bool SMESHGUI::activateModule( SUIT_Study* study ) QList wndList = aDesk->windows(); SUIT_ViewWindow* wnd; foreach ( wnd, wndList ) + { connectView( wnd ); + + // remove actors whose objects are removed in GetSMESHGen()->UpdateStudy() + SMESH::UpdateActorsAfterUpdateStudy(wnd); + + wnd->update(); + } } Py_XDECREF(pluginsmanager); @@ -4909,9 +5213,9 @@ void SMESHGUI::contextMenuPopup( const QString& client, QMenu* menu, QString& ti _PTR(Study) study = appStudy->studyDS(); _PTR(SObject) obj = study->FindObjectID( io->getEntry() ); if ( obj ) { - QString aName = QString( SMESH::fromUtf8(obj->GetName()) ); - while ( aName.at( aName.length() - 1 ) == ' ' ) // Remove extraspaces in Name of Popup - aName.remove( (aName.length() - 1), 1 ); + QString aName = SMESH::fromUtf8( obj->GetName()); + while ( !aName.isEmpty() && aName.at( aName.length() - 1 ) == ' ' ) // Remove extraspaces in Name of Popup + aName.remove(( aName.length() - 1 ), 1 ); title = aName; } } @@ -5009,6 +5313,9 @@ void SMESHGUI::createPreferences() int dispgroup = addPreference( tr( "PREF_DISPLAY_MODE_GROUP" ), genTab ); setPreferenceProperty( dispgroup, "columns", 2 ); + + addPreference( tr( "PREF_FITALL_ON_DISPLAYONLY" ), dispgroup, LightApp_Preferences::Bool, "SMESH", "fitall_on_displayonly" ); + int dispmode = addPreference( tr( "PREF_DISPLAY_MODE" ), dispgroup, LightApp_Preferences::Selector, "SMESH", "display_mode" ); QStringList modes; modes.append( tr("MEN_WIRE") ); @@ -5053,11 +5360,21 @@ void SMESHGUI::createPreferences() setPreferenceProperty( doubleNodesTol, "max", 1000000.0 ); setPreferenceProperty( doubleNodesTol, "step", 0.0000001 ); + /* + int cinc = addPreference(tr("PREF_CONTROLS_INCREMENT"), qaGroup, LightApp_Preferences::IntSpin, "SMESH", "controls_increment"); + setPreferenceProperty( cinc, "min", 0 ); + setPreferenceProperty( cinc, "max", 5 ); + */ int exportgroup = addPreference( tr( "PREF_GROUP_EXPORT" ), genTab ); setPreferenceProperty( exportgroup, "columns", 2 ); addPreference( tr( "PREF_AUTO_GROUPS" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "auto_groups" ); addPreference( tr( "PREF_SHOW_WARN" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "show_warning" ); + int zTol = addPreference( tr( "PREF_ZTOLERANCE" ), exportgroup, LightApp_Preferences::DblSpin, "SMESH", "med_ztolerance" ); + setPreferenceProperty( zTol, "precision", 10 ); + setPreferenceProperty( zTol, "min", 0.0000000001 ); + setPreferenceProperty( zTol, "max", 1000000.0 ); + setPreferenceProperty( zTol, "step", 1. ); //addPreference( tr( "PREF_RENUMBER" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "renumbering" ); int computeGroup = addPreference( tr( "PREF_GROUP_COMPUTE" ), genTab ); @@ -5111,6 +5428,7 @@ void SMESHGUI::createPreferences() "SMESH", "nb_segments_per_edge" ); setPreferenceProperty( nbSeg, "min", 1 ); setPreferenceProperty( nbSeg, "max", 10000000 ); + addPreference( tr( "PREF_USE_MESHGEMS_HYPOSET" ), segGroup, LightApp_Preferences::Bool, "SMESH", "use-meshgems-hypo-sets" ); int loadGroup = addPreference( tr( "SMESH_PREF_MESH_LOADING" ), genTab ); addPreference( tr( "PREF_FORGET_MESH_AT_HYP_MODIF" ), loadGroup, LightApp_Preferences::Bool, @@ -5246,7 +5564,7 @@ void SMESHGUI::createPreferences() int numGroup = addPreference( tr( "PREF_GROUP_NUMBERING" ), meshTab ); setPreferenceProperty( numGroup, "columns", 2 ); - + addPreference( tr( "PREF_NUMBERING_NODE" ), numGroup, LightApp_Preferences::Color, "SMESH", "numbering_node_color" ); addVtkFontPref( tr( "PREF_NUMBERING_FONT" ), numGroup, "numbering_node_font", true ); @@ -5286,6 +5604,10 @@ void SMESHGUI::createPreferences() addPreference( tr( "PREF_ELEMENTS" ), precSelGroup, LightApp_Preferences::Double, "SMESH", "selection_precision_element" ); addPreference( tr( "PREF_OBJECTS" ), precSelGroup, LightApp_Preferences::Double, "SMESH", "selection_precision_object" ); + int sinc = addPreference(tr("PREF_SELECTION_INCREMENT"), selTab, LightApp_Preferences::IntSpin, "SMESH", "selection_increment"); + setPreferenceProperty( sinc, "min", 0 ); + setPreferenceProperty( sinc, "max", 5 ); + // Scalar Bar tab ------------------------------------------------------------------------ int sbarTab = addPreference( tr( "SMESH_SCALARBAR" ) ); int fontGr = addPreference( tr( "SMESH_FONT_SCALARBAR" ), sbarTab ); @@ -5380,12 +5702,13 @@ void SMESHGUI::preferencesChanged( const QString& sect, const QString& name ) std::string aWarning; SUIT_ResourceMgr* aResourceMgr = SMESH::GetResourceMgr(this); - if ( name== "selection_object_color" || - name=="selection_element_color" || - name== "highlight_color" || - name=="selection_precision_node" || - name=="selection_precision_element" || - name=="selection_precision_object" ) + if ( name == "selection_object_color" || + name == "selection_element_color" || + name == "highlight_color" || + name == "selection_precision_node" || + name == "selection_precision_element" || + name == "selection_precision_object" || + name == "selection_increment") { SMESH::UpdateSelectionProp( this ); } @@ -5531,55 +5854,55 @@ LightApp_Operation* SMESHGUI::createOperation( const int id ) const // to do : create operation here switch( id ) { - case SMESHOp::OpSplitBiQuadratic: - op = new SMESHGUI_SplitBiQuadOp(); + case SMESHOp::OpSplitBiQuadratic: + op = new SMESHGUI_SplitBiQuadOp(); break; - case SMESHOp::OpConvertMeshToQuadratic: - op = new SMESHGUI_ConvToQuadOp(); + case SMESHOp::OpConvertMeshToQuadratic: + op = new SMESHGUI_ConvToQuadOp(); break; - case SMESHOp::OpCreateBoundaryElements: // create 2D mesh as boundary on 3D - op = new SMESHGUI_Make2DFrom3DOp(); + case SMESHOp::OpCreateBoundaryElements: // create 2D mesh as boundary on 3D + op = new SMESHGUI_Make2DFrom3DOp(); break; - case SMESHOp::OpReorientFaces: - op = new SMESHGUI_ReorientFacesOp(); - break; - case SMESHOp::OpCreateMesh: - op = new SMESHGUI_MeshOp( true, true ); + case SMESHOp::OpReorientFaces: + op = new SMESHGUI_ReorientFacesOp(); break; - case SMESHOp::OpCreateSubMesh: - op = new SMESHGUI_MeshOp( true, false ); + case SMESHOp::OpCreateMesh: + op = new SMESHGUI_MeshOp( true, true ); break; - case SMESHOp::OpEditMeshOrSubMesh: - case SMESHOp::OpEditMesh: - case SMESHOp::OpEditSubMesh: - op = new SMESHGUI_MeshOp( false ); + case SMESHOp::OpCreateSubMesh: + op = new SMESHGUI_MeshOp( true, false ); break; - case SMESHOp::OpCompute: - case SMESHOp::OpComputeSubMesh: - op = new SMESHGUI_ComputeOp(); + case SMESHOp::OpEditMeshOrSubMesh: + case SMESHOp::OpEditMesh: + case SMESHOp::OpEditSubMesh: + op = new SMESHGUI_MeshOp( false ); break; - case SMESHOp::OpPreCompute: - op = new SMESHGUI_PrecomputeOp(); + case SMESHOp::OpCompute: + case SMESHOp::OpComputeSubMesh: + op = new SMESHGUI_ComputeOp(); break; - case SMESHOp::OpEvaluate: - op = new SMESHGUI_EvaluateOp(); + case SMESHOp::OpPreCompute: + op = new SMESHGUI_PrecomputeOp(); break; - case SMESHOp::OpMeshOrder: - op = new SMESHGUI_MeshOrderOp(); + case SMESHOp::OpEvaluate: + op = new SMESHGUI_EvaluateOp(); break; - case SMESHOp::OpCreateGeometryGroup: - op = new SMESHGUI_GroupOnShapeOp(); - break; - case SMESHOp::OpFindElementByPoint: - op = new SMESHGUI_FindElemByPointOp(); - break; - case SMESHOp::OpMoveNode: // Make mesh pass through point - op = new SMESHGUI_MakeNodeAtPointOp(); - break; - case SMESHOp::OpElem0DOnElemNodes: // Create 0D elements on all nodes - op = new SMESHGUI_Add0DElemsOnAllNodesOp(); - break; - default: + case SMESHOp::OpMeshOrder: + op = new SMESHGUI_MeshOrderOp(); + break; + case SMESHOp::OpCreateGeometryGroup: + op = new SMESHGUI_GroupOnShapeOp(); + break; + case SMESHOp::OpFindElementByPoint: + op = new SMESHGUI_FindElemByPointOp(); + break; + case SMESHOp::OpMoveNode: // Make mesh pass through point + op = new SMESHGUI_MakeNodeAtPointOp(); + break; + case SMESHOp::OpElem0DOnElemNodes: // Create 0D elements on all nodes + op = new SMESHGUI_Add0DElemsOnAllNodesOp(); + break; + default: break; } @@ -5667,7 +5990,7 @@ const char* gPathSep = "|"; // character used to separate paths * \brief Store visual parameters * * This method is called just before the study document is saved. - * Store visual parameters in AttributeParameter attribue(s) + * Store visual parameters in AttributeParameter attribute(s) */ void SMESHGUI::storeVisualParameters (int savePoint) { @@ -6019,7 +6342,7 @@ typedef std::map TPlaneInfoMap; * \brief Restore visual parameters * * This method is called after the study document is opened. - * Restore visual parameters from AttributeParameter attribue(s) + * Restore visual parameters from AttributeParameter attribute(s) */ void SMESHGUI::restoreVisualParameters (int savePoint) { @@ -6033,8 +6356,6 @@ void SMESHGUI::restoreVisualParameters (int savePoint) // componentName is used for encoding of entries when storing them in IParameters std::string componentName = myComponentSMESH->ComponentDataType(); - //_PTR(SComponent) aSComponent = studyDS->FindComponent("GEOM"); - //if (!aSComponent) return; // IParameters _PTR(AttributeParameter) ap = studyDS->GetModuleParameters("Interface Applicative", @@ -6133,7 +6454,7 @@ void SMESHGUI::restoreVisualParameters (int savePoint) aPlaneData.Mode = aPropertyValueList[0].toInt( &ok ); if( !ok ) continue; - + ok = false; aPlaneData.isOpenGLClipping = aPropertyValueList[1].toInt( &ok ); if( !ok ) @@ -6633,9 +6954,9 @@ void SMESHGUI::restoreVisualParameters (int savePoint) // Clipping else if (paramNameStr.startsWith("ClippingPlane")) { QStringList vals = val.split(gDigitsSep, QString::SkipEmptyParts); - // old format - val looks like "Off" or "1:0:0:0.5:0:0" + // old format - val looks like "Off" or "1:0:0:0.5:0:0" // (mode(relative), is OpenGL clipping plane, orientation, distance, two angles) - // or "0:1:1:10.5:1.0:1.0:15.0:10.0:10.0" + // or "0:1:1:10.5:1.0:1.0:15.0:10.0:10.0" // (mode(absolute), is OpenGL clipping plane, orientation, base point(x, y, z), direction (dx, dy, dz)) // new format - val looks like "Off" or "0" (plane id) // (note: in new format "Off" value is used only for consistency, @@ -6835,10 +7156,10 @@ void SMESHGUI::restoreVisualParameters (int savePoint) break; } } - + } } - + // update all VTK views QList lst; @@ -6854,7 +7175,7 @@ void SMESHGUI::restoreVisualParameters (int savePoint) while( vtkActor* aVTKActor = anAllActors->GetNextActor() ) if( SMESH_Actor* anActor = SMESH_Actor::SafeDownCast( aVTKActor ) ) anActor->SetOpenGLClippingPlane(); - + vtkView->getRenderer()->ResetCameraClippingRange(); vtkView->Repaint(); } @@ -6973,7 +7294,7 @@ void SMESHGUI::message( const QString& msg ) name = SMESH::fromUtf8(obj->GetName()); if ( name.isEmpty() ) return; - + if ( data.last() == "stop" ) application()->putInfo( tr( "MESH_LOADING_MSG_FINISHED" ).arg( name ) ); else @@ -7014,7 +7335,7 @@ bool SMESHGUI::renameAllowed( const QString& entry) const { return false; SalomeApp_DataObject* obj = dynamic_cast(appStudy->findObjectByEntry(entry)); - + if(!obj) return false; @@ -7044,17 +7365,17 @@ bool SMESHGUI::renameObject( const QString& entry, const QString& name) { SalomeApp_Application* anApp = dynamic_cast( application() ); if( !anApp ) return false; - + SalomeApp_Study* appStudy = dynamic_cast( anApp->activeStudy() ); if(!appStudy) return false; - + _PTR(Study) aStudy = appStudy->studyDS(); - + if(!aStudy) return false; - + bool aLocked = (_PTR(AttributeStudyProperties)(appStudy->studyDS()->GetProperties()))->IsLocked(); if ( aLocked ) { SUIT_MessageBox::warning ( anApp->desktop(), QObject::tr("WRN_WARNING"), QObject::tr("WRN_STUDY_LOCKED") ); @@ -7084,7 +7405,7 @@ bool SMESHGUI::renameObject( const QString& entry, const QString& name) { SMESH::SMESH_GroupBase_var aGroupObject = SMESH::IObjectToInterface(IObject); if( !aGroupObject->_is_nil() ) { - aGroupObject->SetName( qPrintable(name) ); + aGroupObject->SetName( qUtf8Printable(name) ); if ( SMESH_Actor *anActor = SMESH::FindActorByEntry( qPrintable(entry) ) ) anActor->setName( qUtf8Printable(name) ); }