X-Git-Url: http://git.salome-platform.org/gitweb/?p=modules%2Fsmesh.git;a=blobdiff_plain;f=resources%2FStdMeshers.xml.in;h=239ff2cb4919b3e4cdce58a31602899989bb665e;hp=d80b4e7d997f9004e31774b651f44cd1cbff54a9;hb=da78b9467b74750ae0f1c17c3fdc814d4abbc43e;hpb=7b33bc39fd54725e6444d8814129c6fffd826617

diff --git a/resources/StdMeshers.xml.in b/resources/StdMeshers.xml.in
index d80b4e7d9..239ff2cb4 100644
--- a/resources/StdMeshers.xml.in
+++ b/resources/StdMeshers.xml.in
@@ -1,7 +1,7 @@
 <?xml version='1.0' encoding='us-ascii'?>
 <!DOCTYPE meshers PUBLIC "" "desktop.dtd">
 <!--
-  Copyright (C) 2007-2013  CEA/DEN, EDF R&D, OPEN CASCADE
+  Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
 
   Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
   CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -9,7 +9,7 @@
   This library is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
-  version 2.1 of the License.
+  version 2.1 of the License, or (at your option) any later version.
 
   This library is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -55,6 +55,11 @@
                 icon-id  ="mesh_hypo_length.png"
                 dim      ="1"/>
 
+    <hypothesis type     ="GeometricProgression"
+                label-id ="Geometric Progression"
+                icon-id  ="mesh_hypo_length.png"
+                dim      ="1"/>
+
     <hypothesis type     ="FixedPoints1D"
                 label-id ="Fixed Points 1D"
                 icon-id  ="mesh_hypo_length.png"
@@ -84,6 +89,14 @@
                 label-id ="Propagation of 1D Hyp. on Opposite Edges"
                 icon-id  ="mesh_hypo_length.png"
                 dim      ="1"
+                context  ="LOCAL"
+                auxiliary="true"/>
+
+    <hypothesis type     ="PropagOfDistribution"
+                label-id ="Propagation of Node Distribution on Opposite Edges"
+                icon-id  ="mesh_hypo_length.png"
+                dim      ="1"
+                context  ="LOCAL"
                 auxiliary="true"/>
 
     <hypothesis type     ="AutomaticLength"
@@ -106,6 +119,7 @@
                 label-id ="Quadratic Mesh"
                 icon-id  ="mesh_algo_quad.png"
                 dim      ="1"
+                context  ="GLOBAL"
                 auxiliary="true"/>                
 
     <hypothesis type     ="MaxElementArea"
@@ -117,6 +131,7 @@
                 label-id ="Not Conform Mesh Allowed"
                 icon-id  ="mesh_hypo_length.png"
                 dim      ="1,2,3"
+                context  ="GLOBAL"
                 auxiliary="true"/>                
 
     <hypothesis type     ="MaxElementVolume"
@@ -189,6 +204,7 @@
     <hypothesis type     ="CartesianParameters3D"
                 label-id ="Body Fitting Parameters"
                 icon-id  ="mesh_hypo_length.png"
+                context  ="GLOBAL"
                 dim      ="3"/>
 
   </hypotheses>
@@ -200,27 +216,31 @@
 	       icon-id  ="mesh_algo_regular.png"
                hypos    ="SegmentLengthAroundVertex"
                output   ="VERTEX"
+               need-hyp ="true"
                dim      ="0"/>
 
     <algorithm type     ="Regular_1D"
 	       label-id ="Wire Discretisation"
 	       icon-id  ="mesh_algo_regular.png"
-               hypos    ="Adaptive1D,LocalLength,MaxLength,Arithmetic1D,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
-               opt-hypos="Propagation,QuadraticMesh"
+               hypos    ="Adaptive1D,LocalLength,MaxLength,Arithmetic1D,GeometricProgression,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
+               opt-hypos="Propagation,PropagOfDistribution,QuadraticMesh"
                input    ="VERTEX"
                output   ="EDGE"
+               need-hyp ="true"
                dim      ="1">
       <python-wrap>
         <algo>Regular_1D=Segment()</algo>
         <hypo>LocalLength=LocalLength(SetLength(1),,SetPrecision(1))</hypo>
         <hypo>MaxLength=MaxSize(SetLength(1))</hypo>
         <hypo>Arithmetic1D=Arithmetic1D(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
+        <hypo>GeometricProgression=GeometricProgression(SetStartLength(),SetCommonRatio(),SetReversedEdges())</hypo>
         <hypo>StartEndLength=StartEndLength(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
         <hypo>Deflection1D=Deflection1D(SetDeflection())</hypo>
         <hypo>Adaptive1D=Adaptive(SetMinSize(),SetMaxSize(),SetDeflection())</hypo>
         <hypo>AutomaticLength=AutomaticLength(SetFineness())</hypo>
         <hypo>FixedPoints1D=FixedPoints1D(SetPoints(),SetNbSegments(),SetReversedEdges())</hypo>
         <hypo>Propagation=Propagation()</hypo>
+        <hypo>PropagOfDistribution=PropagationOfDistribution()</hypo>
         <hypo>QuadraticMesh=QuadraticMesh()</hypo>
       </python-wrap>
     </algorithm>
@@ -228,22 +248,25 @@
     <algorithm type     ="CompositeSegment_1D"
 	       label-id ="Composite Side Discretisation"
 	       icon-id  ="mesh_algo_regular.png"
-               hypos    ="Adaptive1D,LocalLength,MaxLength,Arithmetic1D,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
-               opt-hypos="Propagation,QuadraticMesh"
+               hypos    ="Adaptive1D,LocalLength,MaxLength,Arithmetic1D,GeometricProgression,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
+               opt-hypos="Propagation,PropagOfDistribution,QuadraticMesh"
                input    ="VERTEX"
                output   ="EDGE"
+               need-hyp ="true"
                dim      ="1">
       <python-wrap>
         <algo>CompositeSegment_1D=Segment(algo=smeshBuilder.COMPOSITE)</algo>
         <hypo>LocalLength=LocalLength(SetLength(), ,SetPrecision())</hypo>
         <hypo>MaxLength=MaxSize(SetLength())</hypo>
         <hypo>Arithmetic1D=Arithmetic1D(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
+        <hypo>GeometricProgression=GeometricProgression(SetStartLength(),SetCommonRatio(),SetReversedEdges())</hypo>
         <hypo>StartEndLength=StartEndLength(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
         <hypo>Deflection1D=Deflection1D(SetDeflection())</hypo>
         <hypo>Adaptive1D=Adaptive(SetMinSize(),SetMaxSize(),SetDeflection())</hypo>
         <hypo>AutomaticLength=AutomaticLength(SetFineness())</hypo>
         <hypo>FixedPoints1D=FixedPoints1D(SetPoints(),SetNbSegments(),SetReversedEdges())</hypo>
         <hypo>Propagation=Propagation()</hypo>
+        <hypo>PropagOfDistribution=PropagationOfDistribution()</hypo>
         <hypo>QuadraticMesh=QuadraticMesh()</hypo>
       </python-wrap>
     </algorithm>
@@ -283,7 +306,7 @@
                dim      ="2">
       <python-wrap>
         <algo>Quadrangle_2D=Quadrangle(algo=smeshBuilder.QUADRANGLE)</algo>
-        <hypo>QuadrangleParams=QuadrangleParameters(SetQuadType(),SetTriaVertex())</hypo>
+        <hypo>QuadrangleParams=QuadrangleParameters(SetQuadType(),SetTriaVertex(),SetEnforcedNodes(1),SetEnforcedNodes(2))</hypo>
         <hypo>ViscousLayers2D=ViscousLayers2D(SetTotalThickness(),SetNumberLayers(),SetStretchFactor(),SetIgnoreEdges())</hypo>
       </python-wrap>
     </algorithm>
@@ -292,6 +315,7 @@
                label-id ="Hexahedron (i,j,k)"
                icon-id  ="mesh_algo_hexa.png"
                input    ="QUAD"
+               output   ="HEXA,PENTA"
 	       need-geom="false"
                opt-hypos="ViscousLayers"
                dim      ="3">
@@ -306,6 +330,7 @@
                icon-id ="mesh_algo_regular.png"
                hypos   ="ProjectionSource1D"
                output  ="EDGE"
+               need-hyp="true"
                dim     ="1">
       <python-wrap>
         <algo>Projection_1D=Projection1D()</algo>
@@ -319,6 +344,7 @@
                input   ="EDGE"
                hypos   ="ProjectionSource2D"
                output  ="QUAD,TRIA"
+               need-hyp="true"
                dim     ="2">
       <python-wrap>
         <algo>Projection_2D=Projection2D()</algo>
@@ -331,6 +357,7 @@
                icon-id ="mesh_algo_quad.png"
                hypos   ="ProjectionSource2D"
                output  ="QUAD,TRIA"
+               need-hyp="true"
                dim     ="2">
       <python-wrap>
         <algo>Projection_1D2D=Projection1D2D()</algo>
@@ -343,6 +370,7 @@
                icon-id ="mesh_algo_hexa.png"
                hypos   ="ProjectionSource3D"
                input   ="QUAD,TRIA"
+               need-hyp="true"
                dim     ="3">
       <python-wrap>
         <algo>Projection_3D=Projection3D()</algo>
@@ -351,10 +379,11 @@
     </algorithm>
 
     <algorithm type    ="Import_1D"
-               label-id="Use Existing 1D Elements"
+               label-id="Import 1D Elements from Another Mesh"
                icon-id ="mesh_algo_regular.png"
                hypos   ="ImportSource1D"
                output  ="EDGE"
+               need-hyp="true"
                dim     ="1">
       <python-wrap>
         <algo>Import_1D=UseExisting1DElements()</algo>
@@ -363,11 +392,12 @@
     </algorithm>
 
     <algorithm type             ="Import_1D2D"
-               label-id         ="Use Existing 2D Elements"
+               label-id         ="Import 1D-2D Elements from Another Mesh"
                icon-id          ="mesh_algo_quad.png"
                hypos            ="ImportSource2D"
                output           ="QUAD,TRIA"
                support-submeshes="false"
+               need-hyp         ="true"
                dim              ="2">
       <python-wrap>
         <algo>Import_1D2D=UseExisting2DElements()</algo>
@@ -379,6 +409,7 @@
                label-id="3D Extrusion"
                icon-id ="mesh_algo_hexa.png"
                input   ="QUAD,TRIA"
+               output  ="HEXA,PENTA,OCTA,POLYHEDRON"
                dim     ="3">
       <python-wrap>
         <algo>Prism_3D=Prism()</algo>
@@ -390,6 +421,8 @@
                icon-id ="mesh_algo_hexa.png"
                hypos   ="NumberOfLayers, LayerDistribution"
                input   ="QUAD,TRIA"
+               output  ="HEXA,PENTA,OCTA,POLYHEDRON"
+               need-hyp="true"
                dim     ="3">
       <python-wrap>
         <algo>RadialPrism_3D=Prism('RadialPrism_3D')</algo>
@@ -398,7 +431,7 @@
     </algorithm>
 
     <algorithm type    ="UseExisting_1D"
-               label-id="Use Existing Edges"
+               label-id="Use Edges to be Created Manually"
                icon-id ="mesh_algo_regular.png"
                input   ="VERTEX"
                output  ="EDGE"
@@ -409,7 +442,7 @@
     </algorithm>
 
     <algorithm type    ="UseExisting_2D"
-               label-id="Use Existing Faces"
+               label-id="Use Faces to be Created Manually"
                icon-id ="mesh_algo_quad.png"
                input   ="EDGE"
                output  ="QUAD,TRIA"
@@ -424,7 +457,7 @@
                icon-id ="mesh_algo_quad.png"
                hypos   ="NumberOfLayers2D, LayerDistribution2D"
                input   ="EDGE"
-               output  ="QUAD,TRIA"
+               output  ="QUAD"
                dim     ="2">
       <python-wrap>
         <algo>RadialQuadrangle_1D2D=Quadrangle(algo=smeshBuilder.RADIAL_QUAD)</algo>
@@ -437,6 +470,9 @@
                icon-id          ="mesh_algo_hexa.png"
                hypos            ="CartesianParameters3D"
                support-submeshes="false"
+               output           ="HEXA"
+               need-hyp         ="true"
+               context          ="GLOBAL"
                dim              ="3">
       <python-wrap>
         <algo>Cartesian_3D=BodyFitted()</algo>