X-Git-Url: http://git.salome-platform.org/gitweb/?p=modules%2Fsmesh.git;a=blobdiff_plain;f=idl%2FSMESH_MeshEditor.idl;h=ea19b5ebe03f90f0a2d1427744ae9de556f26632;hp=f1b2fc82b86d3a86b7919cc81e11e8b86e6e7d38;hb=62336a394b80b503991ff801f2ebf7feff47e7f0;hpb=bd8f1aee7c78f7d2eb82bd4fec5e08c9e3d280ce diff --git a/idl/SMESH_MeshEditor.idl b/idl/SMESH_MeshEditor.idl index f1b2fc82b..ea19b5ebe 100644 --- a/idl/SMESH_MeshEditor.idl +++ b/idl/SMESH_MeshEditor.idl @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -6,7 +6,7 @@ // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public // License as published by the Free Software Foundation; either -// version 2.1 of the License. +// version 2.1 of the License, or (at your option) any later version. // // This library is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -29,37 +29,71 @@ module SMESH { + interface NumericalFunctor; + enum Bnd_Dimension { BND_2DFROM3D, BND_1DFROM3D, BND_1DFROM2D }; + + struct FreeBorder + { + SMESH::long_array nodeIDs; // all nodes defining a free border + // 1st and last node is same in a closed border + }; + struct FreeBorderPart + { + short border; // border index within a sequence + long node1; // node index within the border-th FreeBorder + long node2; + long nodeLast; + }; + typedef sequence ListOfFreeBorders; + typedef sequence FreeBordersGroup; + typedef sequence ListOfFreeBorderGroups; + + struct CoincidentFreeBorders + { + ListOfFreeBorders borders; // nodes of all free borders + ListOfFreeBorderGroups coincidentGroups; // groups of coincident parts of borders + }; + + /*! * This interface makes modifications on the Mesh - removing elements and nodes etc. */ - interface NumericalFunctor; - interface SMESH_MeshEditor { + /*! + * Returns a mesh subject to edition + */ + SMESH_Mesh GetMesh(); + /*! * Return data of mesh edition preview which is computed provided - * that the editor was obtained trough SMESH_Mesh::GetMeshEditPreviewer() + * that the editor was obtained through SMESH_Mesh::GetMeshEditPreviewer() */ MeshPreviewStruct GetPreviewData() raises (SALOME::SALOME_Exception); /*! * If during last operation of MeshEditor some nodes were - * created this method returns list of their IDs, if new nodes + * created, this method returns list of their IDs, if new nodes * not created - returns empty list */ long_array GetLastCreatedNodes() raises (SALOME::SALOME_Exception); /*! * If during last operation of MeshEditor some elements were - * created this method returns list of their IDs, if new elements + * created, this method returns list of their IDs, if new elements * not created - returns empty list */ long_array GetLastCreatedElems() raises (SALOME::SALOME_Exception); /*! - * \brief Returns description of an error/warning occured during the last operation + * \brief Clears sequences of last created elements and nodes + */ + void ClearLastCreated() raises (SALOME::SALOME_Exception); + + /*! + * \brief Returns description of an error/warning occurred during the last operation */ ComputeError GetLastError() raises (SALOME::SALOME_Exception); @@ -102,8 +136,10 @@ module SMESH /*! * Create a 0D element on the given node. * \param IdOfNode Node IDs for creation of element. + * \param DuplicateElements to add one more 0D element to a node or not */ - long Add0DElement(in long IDOfNode) raises (SALOME::SALOME_Exception); + long Add0DElement(in long IDOfNode, + in boolean DuplicateElements) raises (SALOME::SALOME_Exception); /*! * Create a ball element on the given node. @@ -133,6 +169,13 @@ module SMESH long AddPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception); + /*! + * Create a quadratic polygonal face + * \param IdsOfNodes - nodes of the polygon; corner nodes follow first + * \return long - ID of a new polygon + */ + long AddQuadPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception); + /*! * Create volume, either linear and quadratic (this is determed * by number of given nodes). @@ -160,16 +203,17 @@ module SMESH long AddPolyhedralVolumeByFaces (in long_array IdsOfFaces) raises (SALOME::SALOME_Exception); /*! - * Create 0D elements on all nodes of the given object except those - * nodes on which a 0D element already exists. + * Create 0D elements on all nodes of the given object. * \param theObject object on whose nodes 0D elements will be created. * \param theGroupName optional name of a group to add 0D elements created * and/or found on nodes of \a theObject. + * \param theDuplicateElements to add one more 0D element to a node or not * \return an object (a new group or a temporary SMESH_IDSource) holding * ids of new and/or found 0D elements. */ SMESH_IDSource Create0DElementsOnAllNodes(in SMESH_IDSource theObject, - in string theGroupName) + in string theGroupName, + in boolean theDuplicateElements) raises (SALOME::SALOME_Exception); /*! @@ -233,29 +277,39 @@ module SMESH * \param theFace - ID of face whose orientation is checked. * It can be < 1 then \a thePoint is used to find a face. * \param thePoint - is used to find a face if \a theFace < 1. - * \return number of reoriented elements. + * \return number of reoriented faces. */ long Reorient2D(in SMESH_IDSource the2Dgroup, in DirStruct theDirection, in long theFace, in PointStruct thePoint) raises (SALOME::SALOME_Exception); + /*! + * \brief Reorient faces basing on orientation of adjacent volumes. + * \param faces - a list of objects containing face to reorient + * \param volumes - an object containing volumes. + * \param outsideNormal - to orient faces to have their normal + * pointing either \a outside or \a inside the adjacent volumes. + * \return number of reoriented faces. + */ + long Reorient2DBy3D(in ListOfIDSources faces, + in SMESH_IDSource volumes, + in boolean outsideNormal) raises (SALOME::SALOME_Exception); /*! * \brief Fuse neighbour triangles into quadrangles. - * \param theElems The triangles to be fused. + * \param IDsOfElements Ids of triangles to be fused. * \param theCriterion Is used to choose a neighbour to fuse with. * \param theMaxAngle Is a max angle between element normals at which fusion * is still performed; theMaxAngle is mesured in radians. - * \return TRUE in case of success, FALSE otherwise. + * \return \c true in case of success, FALSE otherwise. */ boolean TriToQuad (in long_array IDsOfElements, in NumericalFunctor Criterion, in double MaxAngle) raises (SALOME::SALOME_Exception); - /*! * \brief Fuse neighbour triangles into quadrangles. * - * Behaves like the above method, taking list of elements from \a theObject + * Behaves like the above method, taking a list of elements from \a theObject */ boolean TriToQuadObject (in SMESH_IDSource theObject, in NumericalFunctor Criterion, @@ -263,20 +317,24 @@ module SMESH /*! * \brief Split quadrangles into triangles. - * \param theElems The faces to be splitted. + * \param IDsOfElements Ids of quadrangles to split. * \param theCriterion Is used to choose a diagonal for splitting. * \return TRUE in case of success, FALSE otherwise. */ boolean QuadToTri (in long_array IDsOfElements, in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception); - /*! * \brief Split quadrangles into triangles. * - * Behaves like the above method, taking list of elements from \a theObject + * Behaves like the above method, taking a list of elements from \a theObject */ boolean QuadToTriObject (in SMESH_IDSource theObject, in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception); + /*! + * \brief Split each of quadrangles into 4 triangles. + * \param theQuads Container of quadrangles to split. + */ + void QuadTo4Tri (in SMESH_IDSource theQuads) raises (SALOME::SALOME_Exception); /*! * \brief Split quadrangles into triangles. @@ -286,7 +344,6 @@ module SMESH */ boolean SplitQuad (in long_array IDsOfElements, in boolean Diag13) raises (SALOME::SALOME_Exception); - /*! * \brief Split quadrangles into triangles. * @@ -316,6 +373,39 @@ module SMESH void SplitVolumesIntoTetra(in SMESH_IDSource elems, in short methodFlags) raises (SALOME::SALOME_Exception); + /*! + * \brief Split hexahedra into triangular prisms + * \param elems - elements to split + * \param startHexPoint - a point used to find a hexahedron for which \a facetToSplitNormal + * gives a normal vector defining facets to split into triangles. + * \param facetToSplitNormal - normal used to find a facet of hexahedron + * to split into triangles. + * \param methodFlags - flags passing splitting method: + * 1 - split the hexahedron into 2 prisms + * 2 - split the hexahedron into 4 prisms + * \param allDomains - if \c False, only hexahedra adjacent to one closest + * to \a facetToSplitNormal location are split, else \a facetToSplitNormal + * is used to find the facet to split in all domains present in \a elems. + */ + void SplitHexahedraIntoPrisms(in SMESH_IDSource elems, + in SMESH::PointStruct startHexPoint, + in SMESH::DirStruct facetToSplitNormal, + in short methodFlags, + in boolean allDomains) + raises (SALOME::SALOME_Exception); + + /*! + * \brief Split bi-quadratic elements into linear ones without creation of additional nodes. + * - bi-quadratic triangle will be split into 3 linear quadrangles; + * - bi-quadratic quadrangle will be split into 4 linear quadrangles; + * - tri-quadratic hexahedron will be split into 8 linear hexahedra; + * Quadratic elements of lower dimension adjacent to the split bi-quadratic element + * will be split in order to keep the mesh conformal. + * \param elems - elements to split + */ + void SplitBiQuadraticIntoLinear(in ListOfIDSources elems) + raises (SALOME::SALOME_Exception); + enum Smooth_Method { LAPLACIAN_SMOOTH, CENTROIDAL_SMOOTH }; @@ -354,7 +444,7 @@ module SMESH void ConvertFromQuadraticObject(in SMESH_IDSource theObject) raises (SALOME::SALOME_Exception); - void ConvertToBiQuadratic(in boolean theForce3d, + void ConvertToBiQuadratic(in boolean theForce3d, in SMESH_IDSource theObject) raises (SALOME::SALOME_Exception); @@ -363,190 +453,76 @@ module SMESH void RenumberElements() raises (SALOME::SALOME_Exception); /*! - * \brief Genarate dim+1 elements by rotation of given elements around axis - * \param IDsOfElements - elements to ratate - * \param Axix - rotation axis - * \param AngleInRadians - rotation angle - * \param NbOfSteps - number of elements to generate from one element - */ - void RotationSweep(in long_array IDsOfElements, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance) - raises (SALOME::SALOME_Exception); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups RotationSweepMakeGroups(in long_array IDsOfElements, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance) - raises (SALOME::SALOME_Exception); - /*! - * \brief Genarate dim+1 elements by rotation of the object around axis - * \param theObject - object containing elements to ratate - * \param Axix - rotation axis - * \param AngleInRadians - rotation angle - * \param NbOfSteps - number of elements to generate from one element - */ - void RotationSweepObject(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance) - raises (SALOME::SALOME_Exception); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups RotationSweepObjectMakeGroups(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance) - raises (SALOME::SALOME_Exception); - /*! - * \brief Genarate dim+1 elements by rotation of the object around axis - * \param theObject - object containing elements to ratate - * \param Axix - rotation axis - * \param AngleInRadians - rotation angle - * \param NbOfSteps - number of elements to generate from one element - */ - void RotationSweepObject1D(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance) - raises (SALOME::SALOME_Exception); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups RotationSweepObject1DMakeGroups(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance) - raises (SALOME::SALOME_Exception); - /*! - * \brief Genarate dim+1 elements by rotation of the object around axis - * \param theObject - object containing elements to ratate - * \param Axix - rotation axis - * \param AngleInRadians - rotation angle - * \param NbOfSteps - number of elements to generate from one element - */ - void RotationSweepObject2D(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance) - raises (SALOME::SALOME_Exception); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups RotationSweepObject2DMakeGroups(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance) - raises (SALOME::SALOME_Exception); - /*! - * \brief Genarate dim+1 elements by extrusion of elements along vector - * \param IDsOfElements - elements to sweep - * \param StepVector - vector giving direction and distance of an extrusion step - * \param NbOfSteps - number of elements to generate from one element - */ - void ExtrusionSweep(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps) - raises (SALOME::SALOME_Exception); - /*! - * \brief Genarate dim+1 elements by extrusion of elements along vector - * \param IDsOfElements - elements to sweep - * \param StepVector - vector giving direction and distance of an extrusion step - * \param NbOfSteps - number of elements to generate from one element - */ - void ExtrusionSweep0D(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps) - raises (SALOME::SALOME_Exception); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups ExtrusionSweepMakeGroups(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps) - raises (SALOME::SALOME_Exception); - /*! - * \brief Same as previous but elements are nodes - */ - ListOfGroups ExtrusionSweepMakeGroups0D(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps) - raises (SALOME::SALOME_Exception); - /*! - * Generate new elements by extrusion of theElements - * by StepVector by NbOfSteps - * param ExtrFlags set flags for performing extrusion - * param SewTolerance - uses for comparing locations of nodes if flag - * EXTRUSION_FLAG_SEW is set - */ - void AdvancedExtrusion(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps, - in long ExtrFlags, - in double SewTolerance) - raises (SALOME::SALOME_Exception); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups AdvancedExtrusionMakeGroups(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps, - in long ExtrFlags, - in double SewTolerance) - raises (SALOME::SALOME_Exception); - - void ExtrusionSweepObject(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps) - raises (SALOME::SALOME_Exception); - ListOfGroups ExtrusionSweepObjectMakeGroups(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps) - raises (SALOME::SALOME_Exception); - - void ExtrusionSweepObject0D(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps) - raises (SALOME::SALOME_Exception); - ListOfGroups ExtrusionSweepObject0DMakeGroups(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps) - raises (SALOME::SALOME_Exception); - - void ExtrusionSweepObject1D(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps) - raises (SALOME::SALOME_Exception); - ListOfGroups ExtrusionSweepObject1DMakeGroups(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps) - raises (SALOME::SALOME_Exception); - - void ExtrusionSweepObject2D(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps) - raises (SALOME::SALOME_Exception); - ListOfGroups ExtrusionSweepObject2DMakeGroups(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps) + * \brief Generate dim+1 elements by rotation of the object around axis + * \param Nodes - nodes to revolve: a list including groups, sub-meshes or a mesh + * \param Edges - edges to revolve: a list including groups, sub-meshes or a mesh + * \param Faces - faces to revolve: a list including groups, sub-meshes or a mesh + * \param Axis - rotation axis + * \param AngleInRadians - rotation angle + * \param NbOfSteps - number of elements to generate from one element + * \param ToMakeGroups - if true, new elements will be included into new groups + * corresponding to groups the input elements included in. + * \return ListOfGroups - new groups craeted if \a ToMakeGroups is true + */ + ListOfGroups RotationSweepObjects(in ListOfIDSources Nodes, + in ListOfIDSources Edges, + in ListOfIDSources Faces, + in AxisStruct Axis, + in double AngleInRadians, + in long NbOfSteps, + in double Tolerance, + in boolean ToMakeGroups) + raises (SALOME::SALOME_Exception); + + /*! + * \brief Generate dim+1 elements by extrusion of elements along vector + * \param nodes - nodes to extrude: a list including groups, sub-meshes or a mesh + * \param edges - edges to extrude: a list including groups, sub-meshes or a mesh + * \param faces - faces to extrude: a list including groups, sub-meshes or a mesh + * \param stepVector - vector giving direction and distance of an extrusion step + * \param nbOfSteps - number of elements to generate from one element + * \param toMakeGroups - if true, new elements will be included into new groups + * corresponding to groups the input elements included in. + * \return ListOfGroups - new groups craeted if \a toMakeGroups is true + */ + ListOfGroups ExtrusionSweepObjects(in ListOfIDSources nodes, + in ListOfIDSources edges, + in ListOfIDSources faces, + in DirStruct stepVector, + in long nbOfSteps, + in double_array scaleFactors, + in boolean linearVariation, + in double_array basePoint, + in boolean toMakeGroups) + raises (SALOME::SALOME_Exception); + + /*! Generates new elements by extrusion along the normal to a discretized surface or wire + */ + ListOfGroups ExtrusionByNormal(in ListOfIDSources theObjects, + in double stepSize, + in long nbOfSteps, + in boolean byAverageNormal, + in boolean useInputElemsOnly, + in boolean makeGroups, + in short dim) + raises (SALOME::SALOME_Exception); + + /*! + * Generate new elements by extrusion of theElements + * by StepVector by NbOfSteps + * \param ExtrFlags set flags for performing extrusion + * \param SewTolerance - uses for comparing locations of nodes if flag + * EXTRUSION_FLAG_SEW is set + * \param ToMakeGroups - if true, new elements will be included into new groups + * corresponding to groups the input elements included in. + * \return ListOfGroups - new groups craeted if \a ToMakeGroups is true + */ + ListOfGroups AdvancedExtrusion(in long_array IDsOfElements, + in DirStruct StepVector, + in long NbOfSteps, + in long ExtrFlags, + in double SewTolerance, + in boolean ToMakeGroups) raises (SALOME::SALOME_Exception); enum Extrusion_Error { @@ -557,112 +533,21 @@ module SMESH EXTR_BAD_STARTING_NODE, EXTR_BAD_ANGLES_NUMBER, EXTR_CANT_GET_TANGENT - }; - - ListOfGroups ExtrusionAlongPathX(in long_array IDsOfElements, - in SMESH_IDSource Path, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean LinearVariation, - in boolean HasRefPoint, - in PointStruct RefPoint, - in boolean MakeGroups, - in ElementType ElemType, - out Extrusion_Error Error) - raises (SALOME::SALOME_Exception); - - ListOfGroups ExtrusionAlongPathObjX(in SMESH_IDSource theObject, - in SMESH_IDSource Path, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean LinearVariation, - in boolean HasRefPoint, - in PointStruct RefPoint, - in boolean MakeGroups, - in ElementType ElemType, - out Extrusion_Error Error) - raises (SALOME::SALOME_Exception); - - Extrusion_Error ExtrusionAlongPath(in long_array IDsOfElements, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint) - raises (SALOME::SALOME_Exception); - ListOfGroups ExtrusionAlongPathMakeGroups(in long_array IDsOfElements, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint, - out Extrusion_Error Error) - raises (SALOME::SALOME_Exception); - - Extrusion_Error ExtrusionAlongPathObject(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint) - raises (SALOME::SALOME_Exception); - ListOfGroups ExtrusionAlongPathObjectMakeGroups(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint, - out Extrusion_Error Error) - raises (SALOME::SALOME_Exception); - - Extrusion_Error ExtrusionAlongPathObject1D(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint) - raises (SALOME::SALOME_Exception); - ListOfGroups ExtrusionAlongPathObject1DMakeGroups(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint, - out Extrusion_Error Error) - raises (SALOME::SALOME_Exception); - - Extrusion_Error ExtrusionAlongPathObject2D(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint) - raises (SALOME::SALOME_Exception); - ListOfGroups ExtrusionAlongPathObject2DMakeGroups(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint, - out Extrusion_Error Error) + }; + + ListOfGroups ExtrusionAlongPathObjects(in ListOfIDSources Nodes, + in ListOfIDSources Edges, + in ListOfIDSources Faces, + in SMESH_IDSource Path, + in GEOM::GEOM_Object PathShape, + in long NodeStart, + in boolean HasAngles, + in double_array Angles, + in boolean LinearVariation, + in boolean HasRefPoint, + in PointStruct RefPoint, + in boolean MakeGroups, + out Extrusion_Error Error) raises (SALOME::SALOME_Exception); /*! @@ -766,41 +651,46 @@ module SMESH in AxisStruct Axis, in double AngleInRadians, in boolean CopyGroups, - in string MeshName) + in string MeshName) raises (SALOME::SALOME_Exception); void RotateObject (in SMESH_IDSource theObject, in AxisStruct Axis, in double AngleInRadians, - in boolean Copy) + in boolean Copy) raises (SALOME::SALOME_Exception); ListOfGroups RotateObjectMakeGroups (in SMESH_IDSource theObject, in AxisStruct Axis, - in double AngleInRadians) + in double AngleInRadians) raises (SALOME::SALOME_Exception); SMESH_Mesh RotateObjectMakeMesh (in SMESH_IDSource theObject, in AxisStruct Axis, in double AngleInRadians, in boolean CopyGroups, - in string MeshName) + in string MeshName) raises (SALOME::SALOME_Exception); void FindCoincidentNodes (in double Tolerance, - out array_of_long_array GroupsOfNodes) + out array_of_long_array GroupsOfNodes, + in boolean SeparateCornersAndMedium) raises (SALOME::SALOME_Exception); void FindCoincidentNodesOnPart (in SMESH_IDSource SubMeshOrGroup, in double Tolerance, - out array_of_long_array GroupsOfNodes) + out array_of_long_array GroupsOfNodes, + in boolean SeparateCornersAndMedium) raises (SALOME::SALOME_Exception); void FindCoincidentNodesOnPartBut (in SMESH_IDSource SubMeshOrGroup, in double Tolerance, out array_of_long_array GroupsOfNodes, - in ListOfIDSources ExceptSubMeshOrGroups) + in ListOfIDSources ExceptSubMeshOrGroups, + in boolean SeparateCornersAndMedium) raises (SALOME::SALOME_Exception); - void MergeNodes (in array_of_long_array GroupsOfNodes) + void MergeNodes (in array_of_long_array GroupsOfNodes, + in SMESH::ListOfIDSources NodesToKeep, + in boolean AvoidMakingHoles) raises (SALOME::SALOME_Exception); /*! @@ -864,6 +754,21 @@ module SMESH short GetPointState(in double x, in double y, in double z) raises (SALOME::SALOME_Exception); + /*! + * Returns groups of FreeBorder's coincident within the given tolerance. + * If the tolerance <= 0.0 then one tenth of an average size of elements adjacent + * to free borders being compared is used. + */ + CoincidentFreeBorders FindCoincidentFreeBorders(in double tolerance); + + /*! + * Sew FreeBorder's of each group + */ + short SewCoincidentFreeBorders (in CoincidentFreeBorders freeBorders, + in boolean createPolygons, + in boolean createPolyedrs) + raises (SALOME::SALOME_Exception); + enum Sew_Error { SEW_OK, SEW_BORDER1_NOT_FOUND, @@ -875,8 +780,9 @@ module SMESH SEW_DIFF_NB_OF_ELEMENTS, SEW_TOPO_DIFF_SETS_OF_ELEMENTS, SEW_BAD_SIDE1_NODES, - SEW_BAD_SIDE2_NODES - }; + SEW_BAD_SIDE2_NODES, + SEW_INTERNAL_ERROR + }; Sew_Error SewFreeBorders (in long FirstNodeID1, in long SecondNodeID1, @@ -920,13 +826,29 @@ module SMESH boolean ChangeElemNodes(in long ide, in long_array newIDs) raises (SALOME::SALOME_Exception); + /*! + * \brief Duplicates given elements, i.e. creates new elements based on the + * same nodes as the given ones. + * \param theElements - container of elements to duplicate. + * \param theGroupName - a name of group to contain the generated elements. + * If a group with such a name already exists, the new elements + * are added to the existng group, else a new group is created. + * If \a theGroupName is empty, new elements are not added + * in any group. + * \return a group where the new elements are added. NULL if theGroupName == "". + * \sa DoubleNode() + */ + SMESH_Group DoubleElements( in SMESH_IDSource theElements, + in string theGroupName ) + raises (SALOME::SALOME_Exception); + /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements * \param theNodes - identifiers of nodes to be doubled * \param theModifiedElems - identifiers of elements to be updated by the new (doubled) * nodes. If list of element identifiers is empty then nodes are doubled but * they not assigned to elements - * \return TRUE if operation has been completed successfully, FALSE otherwise + * \return TRUE if operation has been completed successfully, FALSE otherwise * \sa DoubleNode(), DoubleNodeGroup(), DoubleNodeGroups() */ boolean DoubleNodes( in long_array theNodes, in long_array theModifiedElems ) @@ -1231,10 +1153,13 @@ module SMESH * Triangles are transformed in prisms, and quadrangles in hexahedrons. * \param theDomains - list of groups of volumes * \param createJointElems - if TRUE, create the elements + * \param onAllBoundaries - if TRUE, the nodes and elements are also created on + * the boundary between \a theDomains and the rest mesh * \return TRUE if operation has been completed successfully, FALSE otherwise */ boolean DoubleNodesOnGroupBoundaries( in ListOfGroups theDomains, - in boolean createJointElems ) + in boolean createJointElems, + in boolean onAllBoundaries) raises (SALOME::SALOME_Exception); /*!