X-Git-Url: http://git.salome-platform.org/gitweb/?p=modules%2Fsmesh.git;a=blobdiff_plain;f=idl%2FSMESH_MeshEditor.idl;h=8c63fdbdab7dc8a9eb4e57da139fe1d08ef25781;hp=561c5b8841b4945d60160daafac2eceaa1eba64a;hb=a0880e7c367025142b27c4669968a7611837c5a9;hpb=bd4e115a78b52e3fbc016e5e30bb0e19b2a9e7d6 diff --git a/idl/SMESH_MeshEditor.idl b/idl/SMESH_MeshEditor.idl index 561c5b884..8c63fdbda 100644 --- a/idl/SMESH_MeshEditor.idl +++ b/idl/SMESH_MeshEditor.idl @@ -1,4 +1,4 @@ -// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS @@ -6,7 +6,7 @@ // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public // License as published by the Free Software Foundation; either -// version 2.1 of the License. +// version 2.1 of the License, or (at your option) any later version. // // This library is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -25,17 +25,78 @@ #define _SMESH_MESHEDITOR_IDL_ #include "SMESH_Mesh.idl" +#include "SMESH_Gen.idl" module SMESH { + interface NumericalFunctor; + enum Bnd_Dimension { BND_2DFROM3D, BND_1DFROM3D, BND_1DFROM2D }; + + struct FreeBorder + { + SMESH::long_array nodeIDs; // all nodes defining a free border + // 1st and last node is same in a closed border + }; + struct FreeBorderPart + { + short border; // border index within a sequence + long node1; // node index within the border-th FreeBorder + long node2; + long nodeLast; + }; + typedef sequence ListOfFreeBorders; + typedef sequence FreeBordersGroup; + typedef sequence ListOfFreeBorderGroups; + + struct CoincidentFreeBorders + { + ListOfFreeBorders borders; // nodes of all free borders + ListOfFreeBorderGroups coincidentGroups; // groups of coincident parts of borders + }; + + /*! * This interface makes modifications on the Mesh - removing elements and nodes etc. */ - interface NumericalFunctor; interface SMESH_MeshEditor { + /*! + * Returns a mesh subject to edition + */ + SMESH_Mesh GetMesh(); + + /*! + * Return data of mesh edition preview which is computed provided + * that the editor was obtained through SMESH_Mesh::GetMeshEditPreviewer() + */ + MeshPreviewStruct GetPreviewData() raises (SALOME::SALOME_Exception); + + /*! + * If during last operation of MeshEditor some nodes were + * created, this method returns list of their IDs, if new nodes + * not created - returns empty list + */ + long_array GetLastCreatedNodes() raises (SALOME::SALOME_Exception); + + /*! + * If during last operation of MeshEditor some elements were + * created, this method returns list of their IDs, if new elements + * not created - returns empty list + */ + long_array GetLastCreatedElems() raises (SALOME::SALOME_Exception); + + /*! + * \brief Clears sequences of last created elements and nodes + */ + void ClearLastCreated() raises (SALOME::SALOME_Exception); + + /*! + * \brief Returns description of an error/warning occured during the last operation + */ + ComputeError GetLastError() raises (SALOME::SALOME_Exception); + /*! * \brief Wrap a sequence of ids in a SMESH_IDSource * \param IDsOfElements list of mesh elements identifiers @@ -48,20 +109,20 @@ module SMESH * \param IDsOfElements list of mesh elements identifiers * \return \c true if elements are correctly removed or \c false otherwise */ - boolean RemoveElements(in long_array IDsOfElements); + boolean RemoveElements(in long_array IDsOfElements) raises (SALOME::SALOME_Exception); /*! * \brief Remove mesh nodes specified by their identifiers. * \param IDsOfNodes list of mesh nodes identifiers * \return \c true if nodes are correctly removed or \c false otherwise */ - boolean RemoveNodes(in long_array IDsOfNodes); + boolean RemoveNodes(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception); /*! * \brief Remove all orphan nodes. * \return number of removed nodes */ - long RemoveOrphanNodes(); + long RemoveOrphanNodes() raises (SALOME::SALOME_Exception); /*! * \brief Add a new node. @@ -70,19 +131,19 @@ module SMESH * \param z Z coordinate of new node * \return integer identifier of new node */ - long AddNode(in double x, in double y, in double z); + long AddNode(in double x, in double y, in double z) raises (SALOME::SALOME_Exception); /*! * Create a 0D element on the given node. * \param IdOfNode Node IDs for creation of element. */ - long Add0DElement(in long IDOfNode); + long Add0DElement(in long IDOfNode) raises (SALOME::SALOME_Exception); /*! * Create a ball element on the given node. * \param IdOfNode Node IDs for creation of element. */ - long AddBall(in long IDOfNode, in double diameter); + long AddBall(in long IDOfNode, in double diameter) raises (SALOME::SALOME_Exception); /*! * Create an edge, either linear and quadratic (this is determed @@ -92,7 +153,7 @@ module SMESH * of MED. This description is located by the following link: * http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3. */ - long AddEdge(in long_array IDsOfNodes); + long AddEdge(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception); /*! * Create face, either linear and quadratic (this is determed @@ -102,9 +163,16 @@ module SMESH * of MED. This description is located by the following link: * http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3. */ - long AddFace(in long_array IDsOfNodes); + long AddFace(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception); - long AddPolygonalFace(in long_array IdsOfNodes); + long AddPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception); + + /*! + * Create a quadratic polygonal face + * \param IdsOfNodes - nodes of the polygon; corner nodes follow first + * \return long - ID of a new polygon + */ + long AddQuadPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception); /*! * Create volume, either linear and quadratic (this is determed @@ -114,7 +182,7 @@ module SMESH * of MED. This description is located by the following link: * http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3. */ - long AddVolume(in long_array IDsOfNodes); + long AddVolume(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception); /*! * Create volume of many faces, giving nodes for each face. @@ -123,15 +191,27 @@ module SMESH * gives quantity of nodes in face number i. */ long AddPolyhedralVolume (in long_array IdsOfNodes, - in long_array Quantities); - + in long_array Quantities) raises (SALOME::SALOME_Exception); /*! * Create volume of many faces, giving IDs of existing faces. * \param IdsOfFaces List of face IDs for volume creation. * \note The created volume will refer only to nodes * of the given faces, not to the faces itself. */ - long AddPolyhedralVolumeByFaces (in long_array IdsOfFaces); + long AddPolyhedralVolumeByFaces (in long_array IdsOfFaces) raises (SALOME::SALOME_Exception); + + /*! + * Create 0D elements on all nodes of the given object except those + * nodes on which a 0D element already exists. + * \param theObject object on whose nodes 0D elements will be created. + * \param theGroupName optional name of a group to add 0D elements created + * and/or found on nodes of \a theObject. + * \return an object (a new group or a temporary SMESH_IDSource) holding + * ids of new and/or found 0D elements. + */ + SMESH_IDSource Create0DElementsOnAllNodes(in SMESH_IDSource theObject, + in string theGroupName) + raises (SALOME::SALOME_Exception); /*! * \brief Bind a node to a vertex @@ -173,15 +253,20 @@ module SMESH raises (SALOME::SALOME_Exception); - boolean MoveNode(in long NodeID, in double x, in double y, in double z); + boolean MoveNode(in long NodeID, in double x, in double y, in double z) + raises (SALOME::SALOME_Exception); - boolean InverseDiag(in long NodeID1, in long NodeID2); + boolean InverseDiag(in long NodeID1, in long NodeID2) + raises (SALOME::SALOME_Exception); - boolean DeleteDiag(in long NodeID1, in long NodeID2); + boolean DeleteDiag(in long NodeID1, in long NodeID2) + raises (SALOME::SALOME_Exception); - boolean Reorient(in long_array IDsOfElements); + boolean Reorient(in long_array IDsOfElements) + raises (SALOME::SALOME_Exception); - boolean ReorientObject(in SMESH_IDSource theObject); + boolean ReorientObject(in SMESH_IDSource theObject) + raises (SALOME::SALOME_Exception); /*! * \brief Reorient faces contained in \a the2Dgroup. * \param the2Dgroup - the mesh or its part to reorient @@ -189,50 +274,64 @@ module SMESH * \param theFace - ID of face whose orientation is checked. * It can be < 1 then \a thePoint is used to find a face. * \param thePoint - is used to find a face if \a theFace < 1. - * \return number of reoriented elements. + * \return number of reoriented faces. */ long Reorient2D(in SMESH_IDSource the2Dgroup, in DirStruct theDirection, in long theFace, in PointStruct thePoint) raises (SALOME::SALOME_Exception); + /*! + * \brief Reorient faces basing on orientation of adjacent volumes. + * \param faces - a list of objects containing face to reorient + * \param volumes - an object containing volumes. + * \param outsideNormal - to orient faces to have their normal + * pointing either \a outside or \a inside the adjacent volumes. + * \return number of reoriented faces. + */ + long Reorient2DBy3D(in ListOfIDSources faces, + in SMESH_IDSource volumes, + in boolean outsideNormal) raises (SALOME::SALOME_Exception); /*! * \brief Fuse neighbour triangles into quadrangles. - * \param theElems The triangles to be fused. + * \param IDsOfElements Ids of triangles to be fused. * \param theCriterion Is used to choose a neighbour to fuse with. * \param theMaxAngle Is a max angle between element normals at which fusion * is still performed; theMaxAngle is mesured in radians. - * \return TRUE in case of success, FALSE otherwise. + * \return \c true in case of success, FALSE otherwise. */ boolean TriToQuad (in long_array IDsOfElements, in NumericalFunctor Criterion, - in double MaxAngle); - + in double MaxAngle) raises (SALOME::SALOME_Exception); /*! * \brief Fuse neighbour triangles into quadrangles. * - * Behaves like the above method, taking list of elements from \a theObject + * Behaves like the above method, taking a list of elements from \a theObject */ boolean TriToQuadObject (in SMESH_IDSource theObject, in NumericalFunctor Criterion, - in double MaxAngle); + in double MaxAngle) raises (SALOME::SALOME_Exception); /*! * \brief Split quadrangles into triangles. - * \param theElems The faces to be splitted. + * \param IDsOfElements Ids of quadrangles to split. * \param theCriterion Is used to choose a diagonal for splitting. * \return TRUE in case of success, FALSE otherwise. */ boolean QuadToTri (in long_array IDsOfElements, - in NumericalFunctor Criterion); - + in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception); /*! * \brief Split quadrangles into triangles. * - * Behaves like the above method, taking list of elements from \a theObject + * Behaves like the above method, taking a list of elements from \a theObject */ boolean QuadToTriObject (in SMESH_IDSource theObject, - in NumericalFunctor Criterion); + in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception); + /*! + * \brief Split each of quadrangles into 4 triangles. + * \param theQuads Container of quadrangles to split. + */ + void QuadTo4Tri (in SMESH_IDSource theQuads) raises (SALOME::SALOME_Exception); /*! * \brief Split quadrangles into triangles. @@ -241,15 +340,14 @@ module SMESH * \return TRUE in case of success, FALSE otherwise. */ boolean SplitQuad (in long_array IDsOfElements, - in boolean Diag13); - + in boolean Diag13) raises (SALOME::SALOME_Exception); /*! * \brief Split quadrangles into triangles. * * Behaves like the above method, taking list of elements from \a theObject */ boolean SplitQuadObject (in SMESH_IDSource theObject, - in boolean Diag13); + in boolean Diag13) raises (SALOME::SALOME_Exception); /*! * Find better splitting of the given quadrangle. @@ -259,7 +357,7 @@ module SMESH * diagonal is better, 0 if error occurs. */ long BestSplit (in long IDOfQuad, - in NumericalFunctor Criterion); + in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception); /*! * \brief Split volumic elements into tetrahedrons @@ -272,6 +370,39 @@ module SMESH void SplitVolumesIntoTetra(in SMESH_IDSource elems, in short methodFlags) raises (SALOME::SALOME_Exception); + /*! + * \brief Split hexahedra into triangular prisms + * \param elems - elements to split + * \param startHexPoint - a point used to find a hexahedron for which \a facetToSplitNormal + * gives a normal vector defining facets to split into triangles. + * \param facetToSplitNormal - normal used to find a facet of hexahedron + * to split into triangles. + * \param methodFlags - flags passing splitting method: + * 1 - split the hexahedron into 2 prisms + * 2 - split the hexahedron into 4 prisms + * \param allDomains - if \c False, only hexahedra adjacent to one closest + * to \a facetToSplitNormal location are split, else \a facetToSplitNormal + * is used to find the facet to split in all domains present in \a elems. + */ + void SplitHexahedraIntoPrisms(in SMESH_IDSource elems, + in SMESH::PointStruct startHexPoint, + in SMESH::DirStruct facetToSplitNormal, + in short methodFlags, + in boolean allDomains) + raises (SALOME::SALOME_Exception); + + /*! + * \brief Split bi-quadratic elements into linear ones without creation of additional nodes. + * - bi-quadratic triangle will be split into 3 linear quadrangles; + * - bi-quadratic quadrangle will be split into 4 linear quadrangles; + * - tri-quadratic hexahedron will be split into 8 linear hexahedra; + * Quadratic elements of lower dimension adjacent to the split bi-quadratic element + * will be split in order to keep the mesh conformal. + * \param elems - elements to split + */ + void SplitBiQuadraticIntoLinear(in ListOfIDSources elems) + raises (SALOME::SALOME_Exception); + enum Smooth_Method { LAPLACIAN_SMOOTH, CENTROIDAL_SMOOTH }; @@ -279,205 +410,114 @@ module SMESH in long_array IDsOfFixedNodes, in long MaxNbOfIterations, in double MaxAspectRatio, - in Smooth_Method Method); + in Smooth_Method Method) raises (SALOME::SALOME_Exception); boolean SmoothObject(in SMESH_IDSource theObject, in long_array IDsOfFixedNodes, in long MaxNbOfIterations, in double MaxAspectRatio, - in Smooth_Method Method); + in Smooth_Method Method) raises (SALOME::SALOME_Exception); boolean SmoothParametric(in long_array IDsOfElements, in long_array IDsOfFixedNodes, in long MaxNbOfIterations, in double MaxAspectRatio, - in Smooth_Method Method); + in Smooth_Method Method) raises (SALOME::SALOME_Exception); boolean SmoothParametricObject(in SMESH_IDSource theObject, in long_array IDsOfFixedNodes, in long MaxNbOfIterations, in double MaxAspectRatio, - in Smooth_Method Method); - - void ConvertToQuadratic(in boolean theForce3d); - - boolean ConvertFromQuadratic(); + in Smooth_Method Method) raises (SALOME::SALOME_Exception); + void ConvertToQuadratic(in boolean theForce3d) + raises (SALOME::SALOME_Exception); void ConvertToQuadraticObject(in boolean theForce3d, in SMESH_IDSource theObject) raises (SALOME::SALOME_Exception); + + boolean ConvertFromQuadratic() + raises (SALOME::SALOME_Exception); + void ConvertFromQuadraticObject(in SMESH_IDSource theObject) + raises (SALOME::SALOME_Exception); - void ConvertFromQuadraticObject(in SMESH_IDSource theObject) - raises (SALOME::SALOME_Exception); - - void RenumberNodes(); - - void RenumberElements(); - - /*! - * \brief Genarate dim+1 elements by rotation of given elements around axis - * \param IDsOfElements - elements to ratate - * \param Axix - rotation axis - * \param AngleInRadians - rotation angle - * \param NbOfSteps - number of elements to generate from one element - */ - void RotationSweep(in long_array IDsOfElements, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups RotationSweepMakeGroups(in long_array IDsOfElements, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance); - /*! - * \brief Genarate dim+1 elements by rotation of the object around axis - * \param theObject - object containing elements to ratate - * \param Axix - rotation axis - * \param AngleInRadians - rotation angle - * \param NbOfSteps - number of elements to generate from one element - */ - void RotationSweepObject(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups RotationSweepObjectMakeGroups(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance); - /*! - * \brief Genarate dim+1 elements by rotation of the object around axis - * \param theObject - object containing elements to ratate - * \param Axix - rotation axis - * \param AngleInRadians - rotation angle - * \param NbOfSteps - number of elements to generate from one element - */ - void RotationSweepObject1D(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups RotationSweepObject1DMakeGroups(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance); - /*! - * \brief Genarate dim+1 elements by rotation of the object around axis - * \param theObject - object containing elements to ratate - * \param Axix - rotation axis - * \param AngleInRadians - rotation angle - * \param NbOfSteps - number of elements to generate from one element - */ - void RotationSweepObject2D(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups RotationSweepObject2DMakeGroups(in SMESH_IDSource theObject, - in AxisStruct Axix, - in double AngleInRadians, - in long NbOfSteps, - in double Tolerance); - /*! - * \brief Genarate dim+1 elements by extrusion of elements along vector - * \param IDsOfElements - elements to sweep - * \param StepVector - vector giving direction and distance of an extrusion step - * \param NbOfSteps - number of elements to generate from one element - */ - void ExtrusionSweep(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps); - /*! - * \brief Genarate dim+1 elements by extrusion of elements along vector - * \param IDsOfElements - elements to sweep - * \param StepVector - vector giving direction and distance of an extrusion step - * \param NbOfSteps - number of elements to generate from one element - */ - void ExtrusionSweep0D(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups ExtrusionSweepMakeGroups(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps); - /*! - * \brief Same as previous but elements are nodes + void ConvertToBiQuadratic(in boolean theForce3d, + in SMESH_IDSource theObject) + raises (SALOME::SALOME_Exception); + + void RenumberNodes() raises (SALOME::SALOME_Exception); + + void RenumberElements() raises (SALOME::SALOME_Exception); + + /*! + * \brief Generate dim+1 elements by rotation of the object around axis + * \param Nodes - nodes to revolve: a list including groups, sub-meshes or a mesh + * \param Edges - edges to revolve: a list including groups, sub-meshes or a mesh + * \param Faces - faces to revolve: a list including groups, sub-meshes or a mesh + * \param Axis - rotation axis + * \param AngleInRadians - rotation angle + * \param NbOfSteps - number of elements to generate from one element + * \param ToMakeGroups - if true, new elements will be included into new groups + * corresponding to groups the input elements included in. + * \return ListOfGroups - new groups craeted if \a ToMakeGroups is true + */ + ListOfGroups RotationSweepObjects(in ListOfIDSources Nodes, + in ListOfIDSources Edges, + in ListOfIDSources Faces, + in AxisStruct Axis, + in double AngleInRadians, + in long NbOfSteps, + in double Tolerance, + in boolean ToMakeGroups) + raises (SALOME::SALOME_Exception); + + /*! + * \brief Generate dim+1 elements by extrusion of elements along vector + * \param nodes - nodes to extrude: a list including groups, sub-meshes or a mesh + * \param edges - edges to extrude: a list including groups, sub-meshes or a mesh + * \param faces - faces to extrude: a list including groups, sub-meshes or a mesh + * \param stepVector - vector giving direction and distance of an extrusion step + * \param nbOfSteps - number of elements to generate from one element + * \param toMakeGroups - if true, new elements will be included into new groups + * corresponding to groups the input elements included in. + * \return ListOfGroups - new groups craeted if \a toMakeGroups is true + */ + ListOfGroups ExtrusionSweepObjects(in ListOfIDSources nodes, + in ListOfIDSources edges, + in ListOfIDSources faces, + in DirStruct stepVector, + in long nbOfSteps, + in boolean toMakeGroups) + raises (SALOME::SALOME_Exception); + + /*! Generates new elements by extrusion along the normal to a discretized surface or wire */ - ListOfGroups ExtrusionSweepMakeGroups0D(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps); - /*! - * Generate new elements by extrusion of theElements - * by StepVector by NbOfSteps - * param ExtrFlags set flags for performing extrusion - * param SewTolerance - uses for comparing locations of nodes if flag - * EXTRUSION_FLAG_SEW is set - */ - void AdvancedExtrusion(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps, - in long ExtrFlags, - in double SewTolerance); - /*! - * \brief Same as previous but additionally create groups of elements - * generated from elements belonging to preexisting groups - */ - ListOfGroups AdvancedExtrusionMakeGroups(in long_array IDsOfElements, - in DirStruct StepVector, - in long NbOfSteps, - in long ExtrFlags, - in double SewTolerance); - - void ExtrusionSweepObject(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps); - ListOfGroups ExtrusionSweepObjectMakeGroups(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps); - - void ExtrusionSweepObject0D(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps); - ListOfGroups ExtrusionSweepObject0DMakeGroups(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps); - - void ExtrusionSweepObject1D(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps); - ListOfGroups ExtrusionSweepObject1DMakeGroups(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps); - - void ExtrusionSweepObject2D(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps); - ListOfGroups ExtrusionSweepObject2DMakeGroups(in SMESH_IDSource theObject, - in DirStruct StepVector, - in long NbOfSteps); + ListOfGroups ExtrusionByNormal(in ListOfIDSources theObjects, + in double stepSize, + in long nbOfSteps, + in boolean byAverageNormal, + in boolean useInputElemsOnly, + in boolean makeGroups, + in short dim) + raises (SALOME::SALOME_Exception); + + /*! + * Generate new elements by extrusion of theElements + * by StepVector by NbOfSteps + * \param ExtrFlags set flags for performing extrusion + * \param SewTolerance - uses for comparing locations of nodes if flag + * EXTRUSION_FLAG_SEW is set + * \param ToMakeGroups - if true, new elements will be included into new groups + * corresponding to groups the input elements included in. + * \return ListOfGroups - new groups craeted if \a ToMakeGroups is true + */ + ListOfGroups AdvancedExtrusion(in long_array IDsOfElements, + in DirStruct StepVector, + in long NbOfSteps, + in long ExtrFlags, + in double SewTolerance, + in boolean ToMakeGroups) + raises (SALOME::SALOME_Exception); enum Extrusion_Error { EXTR_OK, @@ -487,103 +527,22 @@ module SMESH EXTR_BAD_STARTING_NODE, EXTR_BAD_ANGLES_NUMBER, EXTR_CANT_GET_TANGENT - }; - - ListOfGroups ExtrusionAlongPathX(in long_array IDsOfElements, - in SMESH_IDSource Path, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean LinearVariation, - in boolean HasRefPoint, - in PointStruct RefPoint, - in boolean MakeGroups, - in ElementType ElemType, - out Extrusion_Error Error); - - ListOfGroups ExtrusionAlongPathObjX(in SMESH_IDSource theObject, - in SMESH_IDSource Path, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean LinearVariation, - in boolean HasRefPoint, - in PointStruct RefPoint, - in boolean MakeGroups, - in ElementType ElemType, - out Extrusion_Error Error); - - Extrusion_Error ExtrusionAlongPath(in long_array IDsOfElements, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint); - ListOfGroups ExtrusionAlongPathMakeGroups(in long_array IDsOfElements, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint, - out Extrusion_Error Error); - - Extrusion_Error ExtrusionAlongPathObject(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint); - ListOfGroups ExtrusionAlongPathObjectMakeGroups(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint, - out Extrusion_Error Error); - - Extrusion_Error ExtrusionAlongPathObject1D(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint); - ListOfGroups ExtrusionAlongPathObject1DMakeGroups(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint, - out Extrusion_Error Error); - - Extrusion_Error ExtrusionAlongPathObject2D(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint); - ListOfGroups ExtrusionAlongPathObject2DMakeGroups(in SMESH_IDSource theObject, - in SMESH_Mesh PathMesh, - in GEOM::GEOM_Object PathShape, - in long NodeStart, - in boolean HasAngles, - in double_array Angles, - in boolean HasRefPoint, - in PointStruct RefPoint, - out Extrusion_Error Error); + }; + + ListOfGroups ExtrusionAlongPathObjects(in ListOfIDSources Nodes, + in ListOfIDSources Edges, + in ListOfIDSources Faces, + in SMESH_IDSource Path, + in GEOM::GEOM_Object PathShape, + in long NodeStart, + in boolean HasAngles, + in double_array Angles, + in boolean LinearVariation, + in boolean HasRefPoint, + in PointStruct RefPoint, + in boolean MakeGroups, + out Extrusion_Error Error) + raises (SALOME::SALOME_Exception); /*! * Compute rotation angles for ExtrusionAlongPath as linear variation @@ -602,101 +561,130 @@ module SMESH void Mirror (in long_array IDsOfElements, in AxisStruct Mirror, in MirrorType Type, - in boolean Copy); + in boolean Copy) + raises (SALOME::SALOME_Exception); ListOfGroups MirrorMakeGroups (in long_array IDsOfElements, in AxisStruct Mirror, - in MirrorType Type); + in MirrorType Type) + raises (SALOME::SALOME_Exception); SMESH_Mesh MirrorMakeMesh (in long_array IDsOfElements, in AxisStruct Mirror, in MirrorType Type, in boolean CopyGroups, - in string MeshName); + in string MeshName) + raises (SALOME::SALOME_Exception); void MirrorObject (in SMESH_IDSource theObject, in AxisStruct Mirror, in MirrorType Type, - in boolean Copy); + in boolean Copy) + raises (SALOME::SALOME_Exception); ListOfGroups MirrorObjectMakeGroups (in SMESH_IDSource theObject, in AxisStruct Mirror, - in MirrorType Type); + in MirrorType Type) + raises (SALOME::SALOME_Exception); SMESH_Mesh MirrorObjectMakeMesh (in SMESH_IDSource theObject, in AxisStruct Mirror, in MirrorType Type, in boolean CopyGroups, - in string MeshName); + in string MeshName) + raises (SALOME::SALOME_Exception); void Translate (in long_array IDsOfElements, in DirStruct Vector, - in boolean Copy); + in boolean Copy) + raises (SALOME::SALOME_Exception); ListOfGroups TranslateMakeGroups (in long_array IDsOfElements, - in DirStruct Vector); + in DirStruct Vector) + raises (SALOME::SALOME_Exception); SMESH_Mesh TranslateMakeMesh (in long_array IDsOfElements, in DirStruct Vector, in boolean CopyGroups, - in string MeshName); + in string MeshName) + raises (SALOME::SALOME_Exception); void TranslateObject (in SMESH_IDSource theObject, in DirStruct Vector, - in boolean Copy); + in boolean Copy) + raises (SALOME::SALOME_Exception); ListOfGroups TranslateObjectMakeGroups (in SMESH_IDSource theObject, - in DirStruct Vector); + in DirStruct Vector) + raises (SALOME::SALOME_Exception); SMESH_Mesh TranslateObjectMakeMesh (in SMESH_IDSource theObject, in DirStruct Vector, in boolean CopyGroups, - in string MeshName); + in string MeshName) + raises (SALOME::SALOME_Exception); void Scale (in SMESH_IDSource theObject, in PointStruct thePoint, in double_array theScaleFact, - in boolean Copy); + in boolean Copy) + raises (SALOME::SALOME_Exception); ListOfGroups ScaleMakeGroups (in SMESH_IDSource theObject, in PointStruct thePoint, - in double_array theScaleFact); + in double_array theScaleFact) + raises (SALOME::SALOME_Exception); SMESH_Mesh ScaleMakeMesh (in SMESH_IDSource theObject, in PointStruct thePoint, in double_array theScaleFact, in boolean CopyGroups, - in string MeshName); + in string MeshName) + raises (SALOME::SALOME_Exception); void Rotate (in long_array IDsOfElements, in AxisStruct Axis, in double AngleInRadians, - in boolean Copy); + in boolean Copy) + raises (SALOME::SALOME_Exception); ListOfGroups RotateMakeGroups (in long_array IDsOfElements, in AxisStruct Axis, - in double AngleInRadians); + in double AngleInRadians) + raises (SALOME::SALOME_Exception); SMESH_Mesh RotateMakeMesh (in long_array IDsOfElements, in AxisStruct Axis, in double AngleInRadians, in boolean CopyGroups, - in string MeshName); + in string MeshName) + raises (SALOME::SALOME_Exception); void RotateObject (in SMESH_IDSource theObject, in AxisStruct Axis, in double AngleInRadians, - in boolean Copy); + in boolean Copy) + raises (SALOME::SALOME_Exception); ListOfGroups RotateObjectMakeGroups (in SMESH_IDSource theObject, in AxisStruct Axis, - in double AngleInRadians); + in double AngleInRadians) + raises (SALOME::SALOME_Exception); SMESH_Mesh RotateObjectMakeMesh (in SMESH_IDSource theObject, in AxisStruct Axis, in double AngleInRadians, in boolean CopyGroups, - in string MeshName); + in string MeshName) + raises (SALOME::SALOME_Exception); void FindCoincidentNodes (in double Tolerance, - out array_of_long_array GroupsOfNodes); + out array_of_long_array GroupsOfNodes, + in boolean SeparateCornersAndMedium) + raises (SALOME::SALOME_Exception); void FindCoincidentNodesOnPart (in SMESH_IDSource SubMeshOrGroup, in double Tolerance, - out array_of_long_array GroupsOfNodes); + out array_of_long_array GroupsOfNodes, + in boolean SeparateCornersAndMedium) + raises (SALOME::SALOME_Exception); void FindCoincidentNodesOnPartBut (in SMESH_IDSource SubMeshOrGroup, in double Tolerance, out array_of_long_array GroupsOfNodes, - in ListOfIDSources ExceptSubMeshOrGroups); + in ListOfIDSources ExceptSubMeshOrGroups, + in boolean SeparateCornersAndMedium) + raises (SALOME::SALOME_Exception); - void MergeNodes (in array_of_long_array GroupsOfNodes); + void MergeNodes (in array_of_long_array GroupsOfNodes, + in SMESH::ListOfIDSources NodesToKeep) + raises (SALOME::SALOME_Exception); /*! * \brief Find elements built on the same nodes. @@ -704,36 +692,42 @@ module SMESH * \return List of groups of equal elements. */ void FindEqualElements (in SMESH_IDSource MeshOrSubMeshOrGroup, - out array_of_long_array GroupsOfElementsID); + out array_of_long_array GroupsOfElementsID) + raises (SALOME::SALOME_Exception); /*! * \brief Merge elements in each given group. * \param GroupsOfElementsID Groups of elements for merging. */ - void MergeElements(in array_of_long_array GroupsOfElementsID); + void MergeElements(in array_of_long_array GroupsOfElementsID) + raises (SALOME::SALOME_Exception); /*! * \brief Merge equal elements in the whole mesh. */ - void MergeEqualElements(); + void MergeEqualElements() + raises (SALOME::SALOME_Exception); /*! * If the given ID is a valid node ID (nodeID > 0), just move this node, else * move the node closest to the point to point's location and return ID of the node */ - long MoveClosestNodeToPoint(in double x, in double y, in double z, in long nodeID); + long MoveClosestNodeToPoint(in double x, in double y, in double z, in long nodeID) + raises (SALOME::SALOME_Exception); /*! * Return ID of node closest to a given point */ - long FindNodeClosestTo(in double x, in double y, in double z); + long FindNodeClosestTo(in double x, in double y, in double z) + raises (SALOME::SALOME_Exception); /*! * Return elements of given type where the given point is IN or ON. * * 'ALL' type means elements of any type excluding nodes and 0D elements */ - long_array FindElementsByPoint(in double x, in double y, in double z, in ElementType type); + long_array FindElementsByPoint(in double x, in double y, in double z, in ElementType type) + raises (SALOME::SALOME_Exception); /*! * Searching among the given elements, return elements of given type @@ -743,13 +737,30 @@ module SMESH */ long_array FindAmongElementsByPoint(in SMESH_IDSource elements, in double x, in double y, in double z, - in ElementType type); + in ElementType type) + raises (SALOME::SALOME_Exception); /*! * Return point state in a closed 2D mesh in terms of TopAbs_State enumeration. * TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails. */ - short GetPointState(in double x, in double y, in double z); + short GetPointState(in double x, in double y, in double z) + raises (SALOME::SALOME_Exception); + + /*! + * Returns groups of FreeBorder's coincident within the given tolerance. + * If the tolerance <= 0.0 then one tenth of an average size of elements adjacent + * to free borders being compared is used. + */ + CoincidentFreeBorders FindCoincidentFreeBorders(in double tolerance); + + /*! + * Sew FreeBorder's of each group + */ + short SewCoincidentFreeBorders (in CoincidentFreeBorders freeBorders, + in boolean createPolygons, + in boolean createPolyedrs) + raises (SALOME::SALOME_Exception); enum Sew_Error { SEW_OK, @@ -772,13 +783,15 @@ module SMESH in long SecondNodeID2, in long LastNodeID2, in boolean CreatePolygons, - in boolean CreatePolyedrs); + in boolean CreatePolyedrs) + raises (SALOME::SALOME_Exception); Sew_Error SewConformFreeBorders (in long FirstNodeID1, in long SecondNodeID1, in long LastNodeID1, in long FirstNodeID2, - in long SecondNodeID2); + in long SecondNodeID2) + raises (SALOME::SALOME_Exception); Sew_Error SewBorderToSide (in long FirstNodeIDOnFreeBorder, in long SecondNodeIDOnFreeBorder, @@ -786,41 +799,40 @@ module SMESH in long FirstNodeIDOnSide, in long LastNodeIDOnSide, in boolean CreatePolygons, - in boolean CreatePolyedrs); + in boolean CreatePolyedrs) + raises (SALOME::SALOME_Exception); Sew_Error SewSideElements (in long_array IDsOfSide1Elements, in long_array IDsOfSide2Elements, in long NodeID1OfSide1ToMerge, in long NodeID1OfSide2ToMerge, in long NodeID2OfSide1ToMerge, - in long NodeID2OfSide2ToMerge); + in long NodeID2OfSide2ToMerge) + raises (SALOME::SALOME_Exception); /*! * Set new nodes for given element. * If number of nodes is not corresponded to type of * element - returns false */ - boolean ChangeElemNodes(in long ide, in long_array newIDs); - - /*! - * Return data of mesh edition preview which is computed provided - * that the editor was obtained trough SMESH_Mesh::GetMeshEditPreviewer() - */ - MeshPreviewStruct GetPreviewData(); - - /*! - * If during last operation of MeshEditor some nodes were - * created this method returns list of it's IDs, if new nodes - * not creared - returns empty list - */ - long_array GetLastCreatedNodes(); + boolean ChangeElemNodes(in long ide, in long_array newIDs) + raises (SALOME::SALOME_Exception); - /*! - * If during last operation of MeshEditor some elements were - * created this method returns list of it's IDs, if new elements - * not creared - returns empty list - */ - long_array GetLastCreatedElems(); + /*! + * \brief Duplicates given elements, i.e. creates new elements based on the + * same nodes as the given ones. + * \param theElements - container of elements to duplicate. + * \param theGroupName - a name of group to contain the generated elements. + * If a group with such a name already exists, the new elements + * are added to the existng group, else a new group is created. + * If \a theGroupName is empty, new elements are not added + * in any group. + * \return a group where the new elements are added. NULL if theGroupName == "". + * \sa DoubleNode() + */ + SMESH_Group DoubleElements( in SMESH_IDSource theElements, + in string theGroupName ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements @@ -828,10 +840,11 @@ module SMESH * \param theModifiedElems - identifiers of elements to be updated by the new (doubled) * nodes. If list of element identifiers is empty then nodes are doubled but * they not assigned to elements - * \return TRUE if operation has been completed successfully, FALSE otherwise + * \return TRUE if operation has been completed successfully, FALSE otherwise * \sa DoubleNode(), DoubleNodeGroup(), DoubleNodeGroups() */ - boolean DoubleNodes( in long_array theNodes, in long_array theModifiedElems ); + boolean DoubleNodes( in long_array theNodes, in long_array theModifiedElems ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements @@ -841,7 +854,8 @@ module SMESH * \return TRUE if operation has been completed successfully, FALSE otherwise * \sa DoubleNodes(), DoubleNodeGroup(), DoubleNodeGroups() */ - boolean DoubleNode( in long theNodeId, in long_array theModifiedElems ); + boolean DoubleNode( in long theNodeId, in long_array theModifiedElems ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements @@ -852,7 +866,8 @@ module SMESH * \sa DoubleNode(), DoubleNodes(), DoubleNodeGroups(), DoubleNodeGroupNew() */ boolean DoubleNodeGroup( in SMESH_GroupBase theNodes, - in SMESH_GroupBase theModifiedElems ); + in SMESH_GroupBase theModifiedElems ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements. * Works as DoubleNodeGroup() described above, but returns a new group with @@ -863,7 +878,8 @@ module SMESH * \sa DoubleNodeGroup() */ SMESH_Group DoubleNodeGroupNew( in SMESH_GroupBase theNodes, - in SMESH_GroupBase theModifiedElems ); + in SMESH_GroupBase theModifiedElems ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements @@ -874,7 +890,8 @@ module SMESH * \sa DoubleNode(), DoubleNodeGroup(), DoubleNodes() */ boolean DoubleNodeGroups( in ListOfGroups theNodes, - in ListOfGroups theModifiedElems ); + in ListOfGroups theModifiedElems ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements * Works as DoubleNodeGroups() described above, but returns a new group with @@ -885,7 +902,8 @@ module SMESH * \sa DoubleNodeGroups() */ SMESH_Group DoubleNodeGroupsNew( in ListOfGroups theNodes, - in ListOfGroups theModifiedElems ); + in ListOfGroups theModifiedElems ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements @@ -899,7 +917,8 @@ module SMESH */ boolean DoubleNodeElem( in long_array theElems, in long_array theNodesNot, - in long_array theAffectedElems ); + in long_array theAffectedElems ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements @@ -914,7 +933,8 @@ module SMESH */ boolean DoubleNodeElemInRegion( in long_array theElems, in long_array theNodesNot, - in GEOM::GEOM_Object theShape ); + in GEOM::GEOM_Object theShape ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements @@ -928,7 +948,8 @@ module SMESH */ boolean DoubleNodeElemGroup( in SMESH_GroupBase theElems, in SMESH_GroupBase theNodesNot, - in SMESH_GroupBase theAffectedElems ); + in SMESH_GroupBase theAffectedElems ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements. * Works as DoubleNodeElemGroup() described above, but returns a new group with @@ -942,7 +963,8 @@ module SMESH */ SMESH_Group DoubleNodeElemGroupNew( in SMESH_GroupBase theElems, in SMESH_GroupBase theNodesNot, - in SMESH_GroupBase theAffectedElems ); + in SMESH_GroupBase theAffectedElems ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements. * Works as DoubleNodeElemGroup() described above, but returns two new groups: @@ -960,7 +982,8 @@ module SMESH in SMESH_GroupBase theNodesNot, in SMESH_GroupBase theAffectedElems, in boolean theElemGroupNeeded, - in boolean theNodeGroupNeeded); + in boolean theNodeGroupNeeded) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements @@ -975,7 +998,8 @@ module SMESH */ boolean DoubleNodeElemGroupInRegion( in SMESH_GroupBase theElems, in SMESH_GroupBase theNodesNot, - in GEOM::GEOM_Object theShape ); + in GEOM::GEOM_Object theShape ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements @@ -989,7 +1013,8 @@ module SMESH */ boolean DoubleNodeElemGroups( in ListOfGroups theElems, in ListOfGroups theNodesNot, - in ListOfGroups theAffectedElems ); + in ListOfGroups theAffectedElems ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements. * Works as DoubleNodeElemGroups() described above, but returns a new group with @@ -1003,7 +1028,8 @@ module SMESH */ SMESH_Group DoubleNodeElemGroupsNew( in ListOfGroups theElems, in ListOfGroups theNodesNot, - in ListOfGroups theAffectedElems ); + in ListOfGroups theAffectedElems ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements. * Works as DoubleNodeElemGroups() described above, but returns two new groups: @@ -1021,7 +1047,8 @@ module SMESH in ListOfGroups theNodesNot, in ListOfGroups theAffectedElems, in boolean theElemGroupNeeded, - in boolean theNodeGroupNeeded ); + in boolean theNodeGroupNeeded ) + raises (SALOME::SALOME_Exception); /*! * \brief Creates a hole in a mesh by doubling the nodes of some particular elements @@ -1036,14 +1063,31 @@ module SMESH */ boolean DoubleNodeElemGroupsInRegion( in ListOfGroups theElems, in ListOfGroups theNodesNot, - in GEOM::GEOM_Object theShape ); + in GEOM::GEOM_Object theShape ) + raises (SALOME::SALOME_Exception); + + /*! + * \brief Identify the elements that will be affected by node duplication (actual duplication is not performed). + * This method is the first step of DoubleNodeElemGroupsInRegion. + * \param theElems - list of groups of elements (edges or faces) to be replicated + * \param theNodesNot - list of groups of nodes not to replicated + * \param theShape - shape to detect affected elements (element which geometric center + * located on or inside shape). + * The replicated nodes should be associated to affected elements. + * \return groups of affected elements + * \sa DoubleNodeElemGroupsInRegion() + */ + ListOfGroups AffectedElemGroupsInRegion( in ListOfGroups theElems, + in ListOfGroups theNodesNot, + in GEOM::GEOM_Object theShape ) + raises (SALOME::SALOME_Exception); /*! * \brief Generates skin mesh (containing 2D cells) from 3D mesh * The created 2D mesh elements based on nodes of free faces of boundary volumes * \return TRUE if operation has been completed successfully, FALSE otherwise */ - boolean Make2DMeshFrom3D(); + boolean Make2DMeshFrom3D() raises (SALOME::SALOME_Exception); /*! * \brief Creates missing boundary elements @@ -1067,7 +1111,7 @@ module SMESH in string meshName, in boolean toCopyElements, in boolean toCopyExistingBondary, - out SMESH_Group group); + out SMESH_Group group) raises (SALOME::SALOME_Exception); /*! * \brief Creates missing boundary elements around either the whole mesh or * groups of 2D elements @@ -1101,10 +1145,13 @@ module SMESH * Triangles are transformed in prisms, and quadrangles in hexahedrons. * \param theDomains - list of groups of volumes * \param createJointElems - if TRUE, create the elements + * \param onAllBoundaries - if TRUE, the nodes and elements are also created on + * the boundary between \a theDomains and the rest mesh * \return TRUE if operation has been completed successfully, FALSE otherwise */ boolean DoubleNodesOnGroupBoundaries( in ListOfGroups theDomains, - in boolean createJointElems ) + in boolean createJointElems, + in boolean onAllBoundaries) raises (SALOME::SALOME_Exception); /*! @@ -1116,7 +1163,21 @@ module SMESH * \param theGroupsOfFaces - list of groups of faces * \return TRUE if operation has been completed successfully, FALSE otherwise */ - boolean CreateFlatElementsOnFacesGroups( in ListOfGroups theGroupsOfFaces ); + boolean CreateFlatElementsOnFacesGroups( in ListOfGroups theGroupsOfFaces ) + raises (SALOME::SALOME_Exception); + + /*! + * \brief identify all the elements around a geom shape, get the faces delimiting the hole + * Build groups of volume to remove, groups of faces to replace on the skin of the object, + * groups of faces to remove insidethe object, (idem edges). + * Build ordered list of nodes at the border of each group of faces to replace (to be used to build a geom subshape) + */ + void CreateHoleSkin(in double radius, + in GEOM::GEOM_Object theShape, + in string groupName, + in double_array theNodesCoords, + out array_of_long_array GroupsOfNodes) + raises (SALOME::SALOME_Exception); }; };