X-Git-Url: http://git.salome-platform.org/gitweb/?p=modules%2Fsmesh.git;a=blobdiff_plain;f=doc%2Fsalome%2Fgui%2FSMESH%2Fquality_controls.htm;fp=doc%2Fsalome%2Fgui%2FSMESH%2Fquality_controls.htm;h=0000000000000000000000000000000000000000;hp=2af942145135939c5a285bd6b576989cb1a20909;hb=79b1ac2b6df9117f16f11d444b1f165d477a1813;hpb=984c4ffdd7df62aeaedc544cd0b8e64ff8f53f1a diff --git a/doc/salome/gui/SMESH/quality_controls.htm b/doc/salome/gui/SMESH/quality_controls.htm deleted file mode 100755 index 2af942145..000000000 --- a/doc/salome/gui/SMESH/quality_controls.htm +++ /dev/null @@ -1,1673 +0,0 @@ - - - - -
-Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
import salome
- -import geompy
- -import SMESH
- -import StdMeshers
- -- -
smesh = salome.lcc.FindOrLoadComponent("FactoryServer", - "SMESH")
- -smesh.SetCurrentStudy(salome.myStudy)
- -- -
# create a box without - one plane
- -box = geompy.MakeBox(0., - 0., 0., 20., 20., 15.)
- -subShapeList = geompy.SubShapeAll(box, - geompy.ShapeType["FACE"])
- -- -
FaceList = - []
- -for i in range( - 5 ):
- -FaceList.append( - subShapeList[ i ] )
- -- -
aComp = geompy.MakeCompound( - FaceList )
- -aBox = geompy.Sew( - aComp, 1. )
- -idbox = geompy.addToStudy( - aBox, "box" )
- -- -
aBox = - salome.IDToObject( idbox )
- -- -
# create a mesh
- -hyp1 = smesh.CreateHypothesis("NumberOfSegments", - "libStdMeshersEngine.so")
- -hyp1.SetNumberOfSegments(5)
- -hyp2 = smesh.CreateHypothesis("MaxElementArea", - "libStdMeshersEngine.so")
- -hyp2.SetMaxElementArea(20)
- -- -
algo1 = smesh.CreateHypothesis("Regular_1D", - "libStdMeshersEngine.so")
- -algo2 = smesh.CreateHypothesis("MEFISTO_2D", - "libStdMeshersEngine.so")
- -- -
mesh = smesh.CreateMesh(aBox)
- -mesh.AddHypothesis(aBox,hyp1)
- -mesh.AddHypothesis(aBox,hyp2)
- -mesh.AddHypothesis(aBox,algo1)
- -mesh.AddHypothesis(aBox,algo2)
- -- -
smesh.Compute(mesh,aBox)
- -- -
smeshgui = salome.ImportComponentGUI("SMESH")
- -smeshgui.Init(salome.myStudyId);
- -smeshgui.SetName( - salome.ObjectToID( mesh ), "Mesh_freebord" );
- -- -
# criterion : free borders
- -aFilterMgr = smesh.CreateFilterManager()
- -aPredicate = aFilterMgr.CreateFreeBorders()
- -aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Free borders Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.EDGE, "Free borders" )
- -aGroup.Add( anIds - )
- -salome.sg.updateObjBrowser(1) -
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
import salome
- -import geompy
- -import SMESH
- -import StdMeshers
- -- -
smesh = salome.lcc.FindOrLoadComponent("FactoryServer", - "SMESH")
- -smesh.SetCurrentStudy(salome.myStudy)
- -- -
# create a box without - one plane
- -- -
box = geompy.MakeBox(0., - 0., 0., 20., 20., 15.)
- -subShapeList = geompy.SubShapeAll(box, - geompy.ShapeType["FACE"])
- -- -
FaceList = - []
- -for i in range( - 5 ):
- -FaceList.append( - subShapeList[ i ] )
- -- -
aComp = geompy.MakeCompound( - FaceList )
- -aBox = geompy.Sew( - aComp, 1. )
- -idbox = geompy.addToStudy( - aBox, "box" )
- -- -
aBox = - salome.IDToObject( idbox )
- -- -
# create a mesh
- -- -
hyp1 = smesh.CreateHypothesis("NumberOfSegments", - "libStdMeshersEngine.so")
- -hyp1.SetNumberOfSegments(5)
- -hyp2 = smesh.CreateHypothesis("MaxElementArea", - "libStdMeshersEngine.so")
- -hyp2.SetMaxElementArea(20)
- -- -
algo1 = smesh.CreateHypothesis("Regular_1D", - "libStdMeshersEngine.so")
- -algo2 = smesh.CreateHypothesis("MEFISTO_2D", - "libStdMeshersEngine.so")
- -- -
mesh = smesh.CreateMesh(aBox)
- -mesh.AddHypothesis(aBox,hyp1)
- -mesh.AddHypothesis(aBox,hyp2)
- -mesh.AddHypothesis(aBox,algo1)
- -mesh.AddHypothesis(aBox,algo2)
- -- -
smesh.Compute(mesh,aBox)
- -- -
smeshgui = salome.ImportComponentGUI("SMESH")
- -smeshgui.Init(salome.myStudyId);
- -smeshgui.SetName( - salome.ObjectToID( mesh ), "Mesh_borders_at_multi-connections" - );
- -- -
# Criterion : Borders at - multi-connection
- -aFilterMgr = smesh.CreateFilterManager()
- -aFunctor = aFilterMgr.CreateMultiConnection()
- -- -
aPredicate = aFilterMgr.CreateEqualTo()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 2 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Borders at multi-connections Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.EDGE, "Borders at multi-connections" )
- -aGroup.Add( anIds - )
- -salome.sg.updateObjBrowser(1) -
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
- -
import salome
- -import geompy
- -import SMESH
- -import StdMeshers
- -- -
smesh = salome.lcc.FindOrLoadComponent("FactoryServer", - "SMESH")
- -smesh.SetCurrentStudy(salome.myStudy)
- -- -
# create a box without - one plane
- -box = geompy.MakeBox(0., - 0., 0., 20., 20., 15.)
- -subShapeList = geompy.SubShapeAll(box, - geompy.ShapeType["FACE"])
- -- -
FaceList = - []
- -for i in range( - 5 ):
- -FaceList.append( - subShapeList[ i ] )
- -- -
aComp = geompy.MakeCompound( - FaceList )
- -aBox = geompy.Sew( - aComp, 1. )
- -idbox = geompy.addToStudy( - aBox, "box" )
- -- -
aBox = - salome.IDToObject( idbox )
- -- -
# create a mesh
- -hyp1 = smesh.CreateHypothesis("NumberOfSegments", - "libStdMeshersEngine.so")
- -hyp1.SetNumberOfSegments(5)
- -hyp2 = smesh.CreateHypothesis("MaxElementArea", - "libStdMeshersEngine.so")
- -hyp2.SetMaxElementArea(20)
- -- -
algo1 = smesh.CreateHypothesis("Regular_1D", - "libStdMeshersEngine.so")
- -algo2 = smesh.CreateHypothesis("MEFISTO_2D", - "libStdMeshersEngine.so")
- -- -
mesh = smesh.CreateMesh(aBox)
- -mesh.AddHypothesis(aBox,hyp1)
- -mesh.AddHypothesis(aBox,hyp2)
- -mesh.AddHypothesis(aBox,algo1)
- -mesh.AddHypothesis(aBox,algo2)
- -- -
smesh.Compute(mesh,aBox)
- -- -
smeshgui = salome.ImportComponentGUI("SMESH")
- -smeshgui.Init(salome.myStudyId);
- -smeshgui.SetName( - salome.ObjectToID( mesh ), "Mesh" );
- -- -
# Criterion : Length > - 3
- -aFilterMgr = smesh.CreateFilterManager()
- -aFunctor = aFilterMgr.CreateLength()
- -- -
aPredicate = aFilterMgr.CreateMoreThan()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 3 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Edges length > 3 Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.EDGE, "Edges with legth > 3" )
- -aGroup.Add( anIds - )
- -salome.sg.updateObjBrowser(1)
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
import SMESH
- -import SMESH_mechanic
- -- -
smesh = - SMESH_mechanic.smesh
- -mesh = - SMESH_mechanic.mesh
- -salome = SMESH_mechanic.salome
- -- -
aFilterMgr = smesh.CreateFilterManager()
- -- -
# Criterion : AREA > - 30
- -aFunctor = aFilterMgr.CreateArea()
- -aPredicate = aFilterMgr.CreateMoreThan()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 95 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -anEditor = mesh.GetMeshEditor()
- -anEditor.RemoveElements(anIds)
- -- -
# Criterion : Free Edges
- -- -
aPredicate = aFilterMgr.CreateFreeEdges()
- -aPredicate.SetMesh( - mesh )
- -aBorders = aPredicate.GetBorders()
- -- -
# create groups
- -aGroupF = mesh.CreateGroup( - SMESH.FACE, "Faces with free edges" )
- -aGroupN = mesh.CreateGroup( - SMESH.NODE, "Nodes on free edges" )
- -- -
# fill groups with elements, - corresponding to the criterion
- -print ""
- -print "Criterion: - Free edges Nb = ", len( aBorders )
- -for i in range( - len( aBorders ) ):
- -aBorder - = aBorders[ i ]
- -print - "Face # ", aBorder.myElemId, " : Edge between nodes (",
- -print - aBorder.myPnt1, ", ", aBorder.myPnt2, ")"
- -- -
aGroupF.Add( - [aBorder.myElemId] )
- -aGroupN.Add( - [aBorder.myPnt1, aBorder.myPnt2] )
- -- -
salome.sg.updateObjBrowser(1) -
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
import salome
- -import geompy
- -import SMESH
- -import StdMeshers
- -- -
smesh = salome.lcc.FindOrLoadComponent("FactoryServer", - "SMESH")
- -smesh.SetCurrentStudy(salome.myStudy)
- -- -
# create a box without - one plane
- -- -
box = geompy.MakeBox(0., - 0., 0., 20., 20., 15.)
- -subShapeList = geompy.SubShapeAll(box, - geompy.ShapeType["FACE"])
- -- -
FaceList = - []
- -for i in range( - 5 ):
- -FaceList.append( - subShapeList[ i ] )
- -- -
aComp = geompy.MakeCompound( - FaceList )
- -aBox = geompy.Sew( - aComp, 1. )
- -idbox = geompy.addToStudy( - aBox, "box" )
- -- -
aBox = - salome.IDToObject( idbox )
- -- -
# create a mesh
- -- -
hyp1 = smesh.CreateHypothesis("NumberOfSegments", - "libStdMeshersEngine.so")
- -hyp1.SetNumberOfSegments(5)
- -hyp2 = smesh.CreateHypothesis("MaxElementArea", - "libStdMeshersEngine.so")
- -hyp2.SetMaxElementArea(20)
- -- -
algo1 = smesh.CreateHypothesis("Regular_1D", - "libStdMeshersEngine.so")
- -algo2 = smesh.CreateHypothesis("MEFISTO_2D", - "libStdMeshersEngine.so")
- -- -
mesh = smesh.CreateMesh(aBox)
- -mesh.AddHypothesis(aBox,hyp1)
- -mesh.AddHypothesis(aBox,hyp2)
- -mesh.AddHypothesis(aBox,algo1)
- -mesh.AddHypothesis(aBox,algo2)
- -- -
smesh.Compute(mesh,aBox)
- -- -
smeshgui = salome.ImportComponentGUI("SMESH")
- -smeshgui.Init(salome.myStudyId);
- -smeshgui.SetName( - salome.ObjectToID( mesh ), "Mesh" );
- -- -
# Criterion : Length 2D - > 5
- -aFilterMgr = smesh.CreateFilterManager()
- -aFunctor = aFilterMgr.CreateLength2D()
- -- -
aPredicate = aFilterMgr.CreateMoreThan()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 5 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Edges length 2D > 5 Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.FACE, "Edges with legth 2D > 5" )
- -aGroup.Add( anIds - )
- -salome.sg.updateObjBrowser(1) -
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
import salome
- -import geompy
- -import SMESH
- -import StdMeshers
- -- -
smesh = salome.lcc.FindOrLoadComponent("FactoryServer", - "SMESH")
- -smesh.SetCurrentStudy(salome.myStudy)
- -- -
# create a box without - one plane
- -box = geompy.MakeBox(0., - 0., 0., 20., 20., 15.)
- -subShapeList = geompy.SubShapeAll(box, - geompy.ShapeType["FACE"])
- -- -
FaceList = - []
- -for i in range( - 5 ):
- -FaceList.append( - subShapeList[ i ] )
- -- -
aComp = geompy.MakeCompound( - FaceList )
- -aBox = geompy.Sew( - aComp, 1. )
- -idbox = geompy.addToStudy( - aBox, "box" )
- -- -
aBox = - salome.IDToObject( idbox )
- -- -
# create a mesh
- -hyp1 = smesh.CreateHypothesis("NumberOfSegments", - "libStdMeshersEngine.so")
- -hyp1.SetNumberOfSegments(5)
- -hyp2 = smesh.CreateHypothesis("MaxElementArea", - "libStdMeshersEngine.so")
- -hyp2.SetMaxElementArea(20)
- -- -
algo1 = smesh.CreateHypothesis("Regular_1D", - "libStdMeshersEngine.so")
- -algo2 = smesh.CreateHypothesis("MEFISTO_2D", - "libStdMeshersEngine.so")
- -- -
mesh = smesh.CreateMesh(aBox)
- -mesh.AddHypothesis(aBox,hyp1)
- -mesh.AddHypothesis(aBox,hyp2)
- -mesh.AddHypothesis(aBox,algo1)
- -mesh.AddHypothesis(aBox,algo2)
- -- -
smesh.Compute(mesh,aBox)
- -smeshgui = salome.ImportComponentGUI("SMESH")
- -smeshgui.Init(salome.myStudyId);
- -smeshgui.SetName( - salome.ObjectToID( mesh ), "Mesh" );
- -- -
# Criterion : MULTI-CONNECTION - 2D = 2
- -aFilterMgr = smesh.CreateFilterManager()
- -aFunctor = aFilterMgr.CreateMultiConnection2D()
- -- -
aPredicate = aFilterMgr.CreateEqualTo()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 2 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Borders at multi-connection 2D = 2 Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.FACE, "Borders at multi-connection 2D = 2" )
- -aGroup.Add( anIds - )
- -salome.sg.updateObjBrowser(1) -
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
import SMESH
- -import SMESH_mechanic
- -- -
smesh = - SMESH_mechanic.smesh
- -mesh = - SMESH_mechanic.mesh
- -salome = SMESH_mechanic.salome
- -- -
aFilterMgr = smesh.CreateFilterManager()
- -- -
# Criterion : AREA > - 100
- -- -
aFunctor = aFilterMgr.CreateArea()
- -aPredicate = aFilterMgr.CreateMoreThan()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 100 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Area > 100 Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.FACE, "Area > 100" )
- -aGroup.Add( anIds - )
- -- -
salome.sg.updateObjBrowser(1) -
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
import SMESH
- -import SMESH_mechanic
- -- -
smesh = - SMESH_mechanic.smesh
- -mesh = - SMESH_mechanic.mesh
- -salome = SMESH_mechanic.salome
- -- -
aFilterMgr = smesh.CreateFilterManager()
- -- -
# Criterion : Taper > - 3e-20
- -- -
aFunctor = aFilterMgr.CreateTaper()
- -aPredicate = aFilterMgr.CreateMoreThan()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 3e-20 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Taper > 3e-20 Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.FACE, "Taper > 3e-20" )
- -aGroup.Add( anIds - )
- -- -
salome.sg.updateObjBrowser(1) -
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
import SMESH
- -import SMESH_mechanic
- -- -
smesh = - SMESH_mechanic.smesh
- -mesh = - SMESH_mechanic.mesh
- -salome = SMESH_mechanic.salome
- -- -
aFilterMgr = smesh.CreateFilterManager()
- -- -
# Criterion : ASPECT RATIO - > 1.4
- -- -
aFunctor = aFilterMgr.CreateAspectRatio()
- -aPredicate = aFilterMgr.CreateMoreThan()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 1.4 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Aspect Ratio > 1.4 Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.FACE, "Aspect Ratio > 1.4" )
- -aGroup.Add( anIds - )
- -- -
salome.sg.updateObjBrowser(1) -
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
- -
import SMESH
- -import SMESH_mechanic
- -- -
smesh = - SMESH_mechanic.smesh
- -mesh = - SMESH_mechanic.mesh
- -salome = SMESH_mechanic.salome
- -- -
aFilterMgr = smesh.CreateFilterManager()
- -- -
# Criterion : MINIMUM - ANGLE < 70
- -- -
aFunctor = aFilterMgr.CreateMinimumAngle()
- -aPredicate = aFilterMgr.CreateLessThan()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 70 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Minimum Angle < 70 Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.FACE, "Minimum Angle < 70" )
- -aGroup.Add( anIds - )
- -- -
salome.sg.updateObjBrowser(1) -
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
import SMESH
- -import SMESH_mechanic
- -- -
smesh = - SMESH_mechanic.smesh
- -mesh = - SMESH_mechanic.mesh
- -salome = SMESH_mechanic.salome
- -- -
aFilterMgr = smesh.CreateFilterManager()
- -- -
# Criterion : WARP ANGLE - > 1e-15
- -- -
aFunctor = aFilterMgr.CreateWarping()
- -aPredicate = aFilterMgr.CreateMoreThan()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 1e-15 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Warp > 1e-15 Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.FACE, "Warp > 1e-15" )
- -aGroup.Add( anIds - )
- -salome.sg.updateObjBrowser(1) -
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
import SMESH
- -import SMESH_mechanic
- -- -
smesh = - SMESH_mechanic.smesh
- -mesh = - SMESH_mechanic.mesh
- -salome = SMESH_mechanic.salome
- -- -
aFilterMgr = smesh.CreateFilterManager()
- -- -
# Criterion : Skew > - 18
- -- -
aFunctor = aFilterMgr.CreateSkew()
- -aPredicate = aFilterMgr.CreateMoreThan()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 18 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Skew > 18 Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.FACE, "Skew > 18" )
- -aGroup.Add( anIds - )
- -- -
salome.sg.updateObjBrowser(1) -
- -- -
Attention! This script was written using old approach, based on direct usage of SMESH idl interface. To be updated for version 3.2.1 to use smesh package.
-
-
-
import SMESH
- -import SMESH_mechanic_tetra
- -- -
smesh = - SMESH_mechanic_tetra.smesh
- -mesh = - SMESH_mechanic_tetra.mesh
- -salome = SMESH_mechanic_tetra.salome
- -- -
aFilterMgr = smesh.CreateFilterManager()
- -- -
# Criterion : ASPECT RATIO - 3D > 2.2
- -- -
aFunctor = aFilterMgr.CreateAspectRatio3D()
- -aPredicate = aFilterMgr.CreateMoreThan()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 2.2 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print "Criterion: - Aspect Ratio 3D > 2.2 Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.VOLUME, "Aspect Ratio 3D > 2.2" )
- -aGroup.Add( anIds - )
- -- -
salome.sg.updateObjBrowser(1) -
- -- -
import SMESH
- -import SMESH_mechanic_tetra
- -- -
smesh = - SMESH_mechanic_tetra.smesh
- -mesh = - SMESH_mechanic_tetra.mesh
- -salome = SMESH_mechanic_tetra.salome
- -- -
aFilterMgr = smesh.CreateFilterManager()
- -- -
# Criterion : VOLUME < - 7
- -- -
aFunctor = aFilterMgr.CreateVolume3D()
- -aPredicate = aFilterMgr.CreateLessThan()
- -aPredicate.SetNumFunctor( - aFunctor )
- -aPredicate.SetMargin( - 7 )
- -- -
aFilter = aFilterMgr.CreateFilter()
- -aFilter.SetPredicate( - aPredicate )
- -- -
anIds = aFilter.GetElementsId( - mesh )
- -- -
# print the result
- -print ""
- -print "Criterion: - Volume < 7 Nb = ", len( anIds )
- -for i in range( - len( anIds ) ):
- -print - anIds[ i ]
- -- -
# create a group
- -aGroup = mesh.CreateGroup( - SMESH.VOLUME, "Volume < 7" )
- -aGroup.Add( anIds - )
- -- -
salome.sg.updateObjBrowser(1) -
- - - -