X-Git-Url: http://git.salome-platform.org/gitweb/?p=modules%2Fsmesh.git;a=blobdiff_plain;f=doc%2Fsalome%2Fgui%2FSMESH%2Finput%2Fselection_filter_library.doc;h=4e58dcee09fefe4ee60d516553e7508f5f582372;hp=66c72a0e848286f681124fc3d8775ff22da41d83;hb=bd4e115a78b52e3fbc016e5e30bb0e19b2a9e7d6;hpb=0635c9fc80f67d1e5dc0e94ec85f487286a92070
diff --git a/doc/salome/gui/SMESH/input/selection_filter_library.doc b/doc/salome/gui/SMESH/input/selection_filter_library.doc
index 66c72a0e8..4e58dcee0 100644
--- a/doc/salome/gui/SMESH/input/selection_filter_library.doc
+++ b/doc/salome/gui/SMESH/input/selection_filter_library.doc
@@ -9,8 +9,8 @@ via Tools / Selection filter library.
\image html selectionfilterlibrary.png
Library file name shows the path and the file name where your
-filters will be stored. By clicking the Browse button you can load an
-existing filter library.
+filters will be stored. By clicking the Browse button you can
+load an existing filter library.
\n Names of filters lists the filters created or uploaded for
the current study. You can \b Add or \b Delete filters.
\n In Filter name box you can specify the name for your
@@ -31,18 +31,28 @@ specify logical relations between criteria using \b Binary operators
Or and And.
\n Some criteria should have the additional parameter of \b Tolerance.
-When we create a Standalone Group using filters (for this click
-Set Filters button in the Create Group menu), the menu
-for setting filters looks a bit differently. Toggling Insert filter
-in viewer checkbox enables to preview the group selected with your
-current filter in the viewer.
-\n In the \b Source field you choose if the filter will be applied to
-the whole \b Mesh, the Initial Selection or the Current Group.
-\n Copy from... button gives you a possibility to load an
+When we create a group using filters (for this click
+Set Filters button in the Create Group dialog), the menu
+for setting filters looks a bit differently (see below). Switching
+on Insert filter in viewer checkbox limits selection of elements
+in the Viewer using your current filter.
+
+In the \b Source field you choose if the filter will be applied to
+the whole \b Mesh, the Initial Selection or the Current
+Group. If \b Mesh is chosen, the elements satisfying the filter
+will be selected in the 3D Viewer. If Initial Selection is
+chosen, the filter will be applied to the selected elements and the
+elements rejected by the filter will be deseleced. If Current
+Group is chosen, the filter will be applied to the list of
+elements in the Greate Croup dialog and the elements rejected
+by the filter will be removed from the list.
+
+Copy from... button gives you a possibility to load an
existing filter from Selection filter library and Add
to... button gives you a possibility to save your current filter
in the Library.
-\n Note: If the button Apply and Close is disabled, there
+
+Note: If the button Apply and Close is disabled, there
is no selected mesh in the Object Browser and the filter can not be
created. You have to select the mesh and the button will be enabled.
@@ -66,20 +76,19 @@ shape, the algorithm works slower.
IDs.
Threshold Value can be, for example: "1,2,3,50-60,63,67,70-78"
-Color of Group allows selection of entities belonging to Group with
-specified color defined by the Threshold Value.
+Color of Group allows selection of entities belonging to the Group with
+the color defined by the Threshold Value.
-Some criteria are applicable to all Entity types: except for
+Some criteria are applicable to all Entity types, except for
Nodes
-
-Linear allows selection of Linear or Quadratic (in case of
-Unary set to "Not" state)
+Linear allows selection of Linear or Quadratic elements (if Unary is set to "Not")
-
Geometry type allows selection of elements by their geometric type
defined by the Threshold Value. The list of available geometric
-types depends on element entity type defined by the Threshold Value.
+types depends on the element entity type defined by the Threshold Value.
@@ -97,12 +106,25 @@ specified arbitrary surface within a given Tolerance.
-Additional criteria to select mesh Edges are the following:
+The following criteria allow selecting mesh Nodes:
+-
+Free nodes selects nodes not belonging to any mesh element.
+
-
+Double nodes selects a node coincident with other nodes
+(within a given Tolerance).
+See also \ref tui_double_nodes_control "Double Nodes quality control".
+
+
+
+The following criteria allow selecting mesh Edges:
-
Free Borders selects free 1D mesh elements, i.e. edges belonging to
one face only. See also a
\ref free_borders_page "Free Borders quality control".
-
+Double edges selects 1D mesh elements basing on the same set of nodes.
+See also \ref filter_double_elements "Double Elements quality control".
+
-
Borders at Multi-Connections selects edges belonging to several faces.
The number of faces should be more, less or equal (within a given Tolerance)
to the predefined Threshold Value. See also a
@@ -115,7 +137,7 @@ See also a
-Additional criteria to select mesh Faces are the following:
+The following criteria allow selecting mesh Faces:
-
Aspect ratio selects 2D mesh elements with an aspect ratio (see also an
\ref aspect_ratio_page "Aspect Ratio quality control"), which is more, less or equal
@@ -145,8 +167,17 @@ Additional criteria to select mesh Faces are the following:
one element of mesh only. See also a
\ref free_edges_page "Free Edges quality control".
-
-Free faces selects 3D mesh elements wich belong less than to
-two volumes.
+Free faces selects 2D mesh elements wich belong to less than two volumes.
+
-
+Double faces selects 2D mesh elements basing on the same set of nodes.
+See also \ref filter_double_elements "Double Elements quality control".
+
-
+Faces with bare border selects 2D mesh elements having a free border without an edge on it.
+See also \ref bare_border_faces_page "Bare border faces quality control".
+
-
+Over-constrained faces selects 2D mesh elements having only one border shared
+with other 2D elements.
+See also \ref over_constrained_faces_page "Over-constrained faces quality control".
-
Borders at Multi-Connections 2D selects cells consisting of edges belonging to
several elements of mesh. The number of mesh elements should be more, less or equal
@@ -158,10 +189,21 @@ See also a
length, which is more, less or equal (within a given Tolerance) to the predefined
Threshold Value. See also a
\ref length_2d_page "Length 2D quality control".
+
-
+Coplanar faces selects mesh faces neighboring the one selected
+by ID in Threshold Value field, if the angle between the
+normal to the neighboring face and the normal to the selected face is less then the
+angular tolerance (defined in degrees). Selection continues among all neighbor faces of already
+selected ones.
+ -
+Element Diameter 2D selects triangles and quadrangles composed of the edges and
+diagonals with a value of length, which is more, less or equal
+(within a given Tolerance) to the predefined Threshold Value. See also a
+\ref max_element_length_2d_page "Element Diameter 2D quality control".
-Additional criteria to select mesh Volumes are the following:
+The following criteria allow selecting mesh Volumes:
-
Aspect ratio 3D selects 3D mesh elements with an aspect ratio (see also an
\ref aspect_ratio_3d_page "Aspect Ratio 3D quality control"), which is more, less or equal
@@ -171,8 +213,23 @@ Additional criteria to select mesh Volumes are the following:
\ref volume_page "Volume quality control"), which is more, less or equal (within a given
Tolerance) to the predefined Threshold Value.
-
+Element Diameter 3D selects 3D mesh elements composed of the edges and
+diagonals with a value of length, which is more, less or equal
+(within a given Tolerance) to the predefined Threshold Value. See also a
+\ref max_element_length_3d_page "Element Diameter 3D quality control".
+
-
+Double volumes selects 3D mesh elements basing on the same set of nodes.
+See also \ref filter_double_elements "Double Elements quality control".
+
-
Bad oriented volume selects mesh volumes, which are incorrectly oriented from
the point of view of MED convention.
+
-
+Over-constrained volumes selects mesh volumes having only one border shared
+with other volumes.
+See also \ref over_constrained_volumes_page "Over-constrained volumes quality control".
+
-
+Volumes with bare border selects 3D mesh elements having a free border without a face on it.
+See also \ref bare_border_volumes_page "Bare border volumes quality control".