X-Git-Url: http://git.salome-platform.org/gitweb/?p=modules%2Fsmesh.git;a=blobdiff_plain;f=doc%2Fsalome%2Fgui%2FSMESH%2Finput%2F1d_meshing_hypo.doc;h=6ba10611e7be1dfa8f24f37d0a3c4ef1be2ae17a;hp=470fe0c4dcd70cb7fa1f0af3b7a45e1873046436;hb=381c06d4b74ecbc55b08a7fd1f73ff0ee419a2f7;hpb=2cd148d0668de3bfbeeceeb7df1995bb5b39475b

diff --git a/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc b/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
index 470fe0c4d..6ba10611e 100644
--- a/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
+++ b/doc/salome/gui/SMESH/input/1d_meshing_hypo.doc
@@ -6,6 +6,7 @@
 <ul>
 <li>\ref adaptive_1d_anchor "Adaptive"</li>
 <li>\ref arithmetic_1d_anchor "Arithmetic 1D"</li>
+<li>\ref geometric_1d_anchor "Geometric Progression"</li>
 <li>\ref average_length_anchor "Local Length"</li>
 <li>\ref max_length_anchor "Max Size"</li>
 <li>\ref deflection_1d_anchor "Deflection 1D"</li>
@@ -34,7 +35,7 @@ creation of narrow 2D elements.
 
 \image html adaptive1d_sample_mesh.png "Adaptive hypothesis and Netgen 2D algorithm - the size of mesh segments reflects the size of geometrical features"
 
-<b>See Also</b> a \ref tui_1d_adaptive "sample TUI Script" that creates mesh of the above image.
+<b>See Also</b> a \ref tui_1d_adaptive "sample TUI Script" that uses Adaptive hypothesis.
 
 <br>
 \anchor arithmetic_1d_anchor
@@ -44,18 +45,46 @@ creation of narrow 2D elements.
 length that changes in arithmetic progression (Lk = Lk-1 + d)
 beginning from a given starting length and up to a given end length.
 
-The direction of the splitting is defined by the orientation of the underlying geometrical edge. 
-<b>"Reverse Edges"</b> list box allows to specify the edges for which the splitting should be made 
-in the direction opposing to their orientation. This list box is enabled only if the geometry object 
-is selected for the meshing. In this case the user can select edges to be reversed either directly 
-picking them in the 3D viewer or by selecting the edges or groups of edges in the Object Browser.
+The splitting direction is defined by the orientation of the
+underlying geometrical edge.
+<b>Reverse Edges</b> list box allows specifying the edges, for which
+the splitting should be made in the direction opposite to their
+orientation. This list box is usable only if a geometry object is
+selected for meshing. In this case it is possible to select edges to
+be reversed either directly picking them in the 3D viewer or by
+selecting the edges or groups of edges in the Object Browser. Use \b
+Add button to add the selected edges to the list.
 
 \image html a-arithmetic1d.png
 
 \image html b-ithmetic1d.png "Arithmetic 1D hypothesis - the size of mesh elements gradually increases"
 
 <b>See Also</b> a sample TUI Script of a 
-\ref tui_1d_arithmetic "Defining Arithmetic 1D hypothesis" operation.  
+\ref tui_1d_arithmetic "Defining Arithmetic 1D and Geometric Progression hypothesis" operation.  
+
+<br>
+\anchor geometric_1d_anchor
+<h2>Geometric Progression hypothesis</h2>
+
+<b>Geometric Progression</b> hypothesis allows splitting edges into
+segments with a length that changes in geometric progression (Lk =
+Lk-1 * d) starting from a given <b>Start Length</b> and with a given
+<b>Common Ratio</b>.
+
+The splitting direction is defined by the orientation of the
+underlying geometrical edge.
+<b>Reverse Edges</b> list box allows specifying the edges, for which
+the splitting should be made in the direction opposite to their
+orientation. This list box is usable only if a geometry object is
+selected for meshing. In this case it is possible to select edges to
+be reversed either directly picking them in the 3D viewer or by
+selecting the edges or groups of edges in the Object Browser. Use \b
+Add button to add the selected edges to the list.
+
+\image html a-geometric1d.png
+
+<b>See Also</b> a sample TUI Script of a 
+\ref tui_1d_arithmetic "Defining Arithmetic 1D and Geometric Progression hypothesis" operation.  
 
 <br>
 \anchor deflection_1d_anchor
@@ -135,11 +164,14 @@ edges generated by these segments will represent nodes of your
 mesh. Later these nodes will be used for meshing of the faces abutting
 to these edges.
 
-The direction of the splitting is defined by the orientation of the underlying geometrical edge. 
-<b>"Reverse Edges"</b> list box allows to specify the edges for which the splitting should be made 
-in the direction opposing to their orientation. This list box is enabled only if the geometry object 
-is selected for the meshing. In this case the user can select edges to be reversed either directly 
-picking them in the 3D viewer or by selecting the edges or groups of edges in the Object Browser.
+The direction of the splitting is defined by the orientation of the
+underlying geometrical edge. <b>"Reverse Edges"</b> list box allows to
+specify the edges for which the splitting should be made in the
+direction opposing to their orientation. This list box is enabled only
+if the geometry object is selected for the meshing. In this case it is 
+possible to select edges to be reversed either by directly picking them
+in the 3D viewer or by selecting the edges or groups of edges in the
+Object Browser.
 
 \image html image46.gif
 
@@ -151,28 +183,48 @@ You can set the type of distribution for this hypothesis in the
 <br><b>Equidistant Distribution</b> - all segments will have the same
 length, you define only the <b>Number of Segments</b>.
 
-<br><b>Scale Distribution</b> - length of segments gradually changes depending on the <b>Scale Factor</b>, which is a ratio of the first segment length to the last segment length.
-
-\image html a-nbsegments2.png
+<br><b>Scale Distribution</b> - length of segments gradually changes
+depending on the <b>Scale Factor</b>, which is a ratio of the first
+segment length to the last segment length.<br>
+Length of segments changes in geometric progression with the common
+ratio (A) depending on the <b>Scale Factor</b> (S) and <b>Number of
+Segments</b> (N) as follows: <code> A = S**(1/(N-1))</code>. For an
+edge of length L, length of the first segment is 
+<code>L * (1 - A)/(1 - A**N)</code>.
 
-<br><b>Distribution with Table Density</b> - you input a number of
-pairs <b>t - F(t)</b>, where \b t ranges from 0 to 1,  and the module computes the
-formula, which will rule the change of length of segments and shows
-the curve in the plot. You can select the <b>Conversion mode</b> from
-\b Exponent and <b>Cut negative</b>.
 
-\image html distributionwithtabledensity.png
+\image html a-nbsegments2.png
 
 <br><b>Distribution with Analytic Density</b> - you input the formula,
 which will rule the change of length of segments and the module shows
-the curve in the plot.
+in the plot the density function curve in red and the node
+distribution as blue crosses.
 
 \image html distributionwithanalyticdensity.png
 
+<br>
+\anchor analyticdensity_anchor
+The node distribution is computed so that to have the density function
+integral on the range between two nodes equal for all segments.
+\image html analyticdensity.png
+
+<br><b>Distribution with Table Density</b> - you input a number of
+pairs <b>t - F(t)</b>, where \b t ranges from 0 to 1, and the module computes the
+formula, which will rule the change of length of segments and shows
+in the plot the density function curve in red and the node
+distribution as blue crosses. The node distribution is computed in the
+same way as for 
+\ref analyticdensity_anchor "Distribution with Analytic Density". You
+can select the <b>Conversion mode</b> from\b Exponent and <b>Cut
+negative</b>. 
+
+\image html distributionwithtabledensity.png
+
 <b>See Also</b> a sample TUI Script of a 
 \ref tui_deflection_1d "Defining Number of Segments" hypothesis
 operation.
 
+
 <br>
 \anchor start_and_end_length_anchor
 <h2>Start and End Length hypothesis</h2>
@@ -184,11 +236,14 @@ geometric progression. Then mesh nodes are
 constructed at segment ends location and 1D mesh elements are
 constructed on them.
 
-The direction of the splitting is defined by the orientation of the underlying geometrical edge. 
-<b>"Reverse Edges"</b> list box allows to specify the edges for which the splitting should be made 
-in the direction opposing to their orientation. This list box is enabled only if the geometry object 
-is selected for the meshing. In this case the user can select edges to be reversed either directly 
-picking them in the 3D viewer or by selecting the edges or groups of edges in the Object Browser.
+The direction of the splitting is defined by the orientation of the
+underlying geometrical edge. <b>"Reverse Edges"</b> list box allows to
+specify the edges, for which the splitting should be made in the
+direction opposing to their orientation. This list box is enabled only
+if the geometry object is selected for the meshing. In this case it is 
+possible to select edges to be reversed either by directly picking them
+in the 3D viewer or by selecting the edges or groups of edges in the
+Object Browser.
 
 \image html a-startendlength.png
 
@@ -202,15 +257,14 @@ hypothesis operation.
 \anchor automatic_length_anchor
 <h2>Automatic Length</h2>
 
-This hypothesis is automatically applied when you select <b>Assign a
-set of hypotheses</b> option in Create Mesh menu.
-
-\image html automaticlength.png
-
 The dialog box prompts you to define the quality of the future mesh by
 only one parameter, which is \b Fineness, ranging from 0 (coarse mesh,
 low number of elements) to 1 (extremely fine mesh, great number of
-elements). Compare one and the same object (sphere) meshed with
+elements). 
+
+\image html automaticlength.png
+
+Compare one and the same object (sphere) meshed with
 minimum and maximum value of this parameter.
 
 \image html image147.gif "Example of a very rough mesh. Automatic Length works for 0."