# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
-#
+#
import SMESH
import math
import Config
from salome.geom import geomBuilder
-geompy = geomBuilder.New( Config.theStudy )
+geompy = geomBuilder.New()
from salome.smesh import smeshBuilder
-smesh = smeshBuilder.New( Config.theStudy )
+smesh = smeshBuilder.New()
##########################################################################################################
def PublishGroups ():
- aFilterManager = smesh.CreateFilterManager()
+ aFilterManager = smesh.CreateFilterManager()
- # Building geometric and mesh compounds and groups ##############################################
- if Config.debug : print "Searching for geometric groups and publishing final compound"
-
+ # Building geometric and mesh compounds and groups ##############################################
+ if Config.debug : print("Searching for geometric groups and publishing final compound")
+
+ TempGEOList = []
+ TempMESHList = []
+
+ for MacroObj in Config.ListObj :
+ TempGEOList += MacroObj.GeoChildren
+ TempMESHList += MacroObj.Mesh
+
+ FinalCompound = geompy.MakeCompound(TempGEOList)
+ geompy.addToStudy (FinalCompound,Config.StudyName)
+ MeshCompound = smesh.Concatenate(TempMESHList, 1, 1, 1e-5)
+ MeshCompound.SetName(Config.StudyName)
+
+ GroupGEO = []
+ for group in Config.Groups :
+
+ # Geometric groups definition
TempGEOList = []
- TempMESHList = []
-
- for MacroObj in Config.ListObj :
- TempGEOList += MacroObj.GeoChildren
- TempMESHList += MacroObj.Mesh
-
- FinalCompound = geompy.MakeCompound(TempGEOList)
- geompy.addToStudy (FinalCompound,Config.StudyName)
- MeshCompound = smesh.Concatenate(TempMESHList, 1, 1, 1e-5)
- MeshCompound.SetName(Config.StudyName)
-
- GroupGEO = []
- for group in Config.Groups :
-
- # Geometric groups definition
- TempGEOList = []
- TempNames = []
- for MacroObj in Config.ListObj :
- if group in MacroObj.GroupNames :
- Occurences = IndexMultiOcc(MacroObj.GroupNames, group)
- for Occ in Occurences :
- TempGEOList += MacroObj.GetBorder(Occ)
- GroupGEO.append(geompy.MakeCompound(TempGEOList))
- geompy.addToStudyInFather(FinalCompound,GroupGEO[-1],'GR_'+group)
-
- # Mesh groups definition
- Criterion = smesh.GetCriterion(SMESH.EDGE, SMESH.FT_BelongToGeom,'=',GroupGEO[-1],Tolerance=1e-06)
- #Criterion = smesh.Filter.Criterion(18,39,0,'GR_'+group,'GR_'+group,39,39,1e-06,smesh.EDGE,7)
- MeshCompound.MakeGroupByCriterion(group,Criterion)
-
- StudyBuilder = Config.theStudy.NewBuilder()
- for MeshObj in TempMESHList:
- SO = Config.theStudy.FindObjectIOR(Config.theStudy.ConvertObjectToIOR(MeshObj))
- if SO is not None: StudyBuilder.RemoveObjectWithChildren(SO)
-
- return MeshCompound
-
+ TempNames = []
+ for MacroObj in Config.ListObj :
+ if group in MacroObj.GroupNames :
+ Occurences = IndexMultiOcc(MacroObj.GroupNames, group)
+ for Occ in Occurences :
+ TempGEOList += MacroObj.GetBorder(Occ)
+ GroupGEO.append(geompy.MakeCompound(TempGEOList))
+ geompy.addToStudyInFather(FinalCompound,GroupGEO[-1],'GR_'+group)
+
+ # Mesh groups definition
+ Criterion = smesh.GetCriterion(SMESH.EDGE, SMESH.FT_BelongToGeom,'=',GroupGEO[-1],Tolerance=1e-06)
+ #Criterion = smesh.Filter.Criterion(18,39,0,'GR_'+group,'GR_'+group,39,39,1e-06,smesh.EDGE,7)
+ MeshCompound.MakeGroupByCriterion(group,Criterion)
+
+ StudyBuilder = Config.theStudy.NewBuilder()
+ for MeshObj in TempMESHList:
+ SO = Config.theStudy.FindObjectIOR(Config.theStudy.ConvertObjectToIOR(MeshObj))
+ if SO is not None: StudyBuilder.RemoveObjectWithChildren(SO)
+
+ return MeshCompound
+
def IndexMultiOcc (Array,Element) :
- """
- This function returns the occurrences indices of Element in Array.
- As opposed to Array.index(Element) method, this allows determining
- multiple entries rather than just the first one!
- """
- Output = []
- try : Array.index(Element)
- except ValueError : print "No more occurrences"
- else : Output.append(Array.index(Element))
-
- if not(Output == [-1]) and len(Array) > 1 :
- for index, ArrElem in enumerate(Array[Output[0]+1:]) :
- if ArrElem is Element : Output.append(index+Output[0]+1)
-
- return Output
-
+ """
+ This function returns the occurrences indices of Element in Array.
+ As opposed to Array.index(Element) method, this allows determining
+ multiple entries rather than just the first one!
+ """
+ Output = []
+ try : Array.index(Element)
+ except ValueError : print("No more occurrences")
+ else : Output.append(Array.index(Element))
+
+ if not(Output == [-1]) and len(Array) > 1 :
+ for index, ArrElem in enumerate(Array[Output[0]+1:]) :
+ if ArrElem is Element : Output.append(index+Output[0]+1)
+
+ return Output
+
def Publish (ObjToPublish):
- for i,GeoObj in enumerate(ObjToPublish) : geompy.addToStudy(GeoObj,"Sub_"+str(i))
-
+ for i,GeoObj in enumerate(ObjToPublish) : geompy.addToStudy(GeoObj,"Sub_"+str(i))
+
def RevolveMesh(MainMesh,**args):
"""
This function permits to revolute and scale a 2D mesh while transforming the edge
################################################################################
if 'Center' in args : CenterCoor = [float(Coor) for Coor in args['Center']]
else :
- print "\nThe coordinates of the center of revolution were not given\nThe origin is used by default."
+ print("\nThe coordinates of the center of revolution were not given\nThe origin is used by default.")
CenterCoor = [0.,0.,0.]
if 'Direction' in args : Direction = [float(Dir) for Dir in args['Direction']]
else :
- print "\nThe axis vector of revolution was not given\nThe x-axis is used by default."
+ print("\nThe axis vector of revolution was not given\nThe x-axis is used by default.")
Direction = [1.,0.,0.]
if 'AngleDeg' in args : Angle = float(args['AngleDeg'])*math.pi/180.
elif 'AngleRad' in args : Angle = float(args['AngleRad'])
else :
- print "\nThe revolution angle was not given\nAn angle of 10 degrees is used by default."
+ print("\nThe revolution angle was not given\nAn angle of 10 degrees is used by default.")
Angle = 10.*math.pi/180.
if 'Scale' in args : Scale = float(args['Scale'])
################################################################################
if 'Distance' in args : Distance = float(args['Distance'])
else :
- print "\nThe extrusion distance was not given\nA default value of 1 is used."
+ print("\nThe extrusion distance was not given\nA default value of 1 is used.")
Distance = 1.
if 'Direction' in args : Direction = NormalizeVector([float(Dir) for Dir in args['Direction']],Distance)
else :
- print "\nThe extrusion vector of revolution was not given\nThe z-axis is used by default."
+ print("\nThe extrusion vector of revolution was not given\nThe z-axis is used by default.")
Direction = NormalizeVector([0.,0.,1.],Distance)
if 'Scale' in args : Scale = float(args['Scale'])
def NormalizeVector (V,Norm):
- """
- This function returns a normalized vector (magnitude = Norm), parallel to the entered one
- """
- V = [float(Coor) for Coor in V]
- Norm = float(Norm)
- MagV = math.sqrt(V[0]*V[0]+V[1]*V[1]+V[2]*V[2])
- return [Coor*Norm/MagV for Coor in V]
-
+ """
+ This function returns a normalized vector (magnitude = Norm), parallel to the entered one
+ """
+ V = [float(Coor) for Coor in V]
+ Norm = float(Norm)
+ MagV = math.sqrt(V[0]*V[0]+V[1]*V[1]+V[2]*V[2])
+ return [Coor*Norm/MagV for Coor in V]
