Update of CheckDone

[modules/smesh.git] / src / StdMeshersGUI / StdMeshersGUI_NbSegmentsCreator.cxx

diff --git a/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx b/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx
index be7c99d26b1d5f693b39126242355348fcd43f32..116df94bcd65268c0549f7b3ab262495fb58944a 100644 (file)
--- a/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx
+++ b/src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx
@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2024  CEA, EDF, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -25,8 +25,11 @@
 // SMESH includes
 //
 #include "StdMeshersGUI_NbSegmentsCreator.h"
+#ifndef DISABLE_PLOT2DVIEWER
+  #include "StdMeshersGUI_DistrPreview.h"
+#endif
 #include "StdMeshersGUI_DistrTable.h"
-#include "StdMeshersGUI_DistrPreview.h"
+#include "StdMeshersGUI_PropagationHelperWdg.h"
 #include "StdMeshersGUI_SubShapeSelectorWdg.h"
 
 #include <SMESHGUI.h>
@@ -63,7 +66,9 @@ StdMeshersGUI_NbSegmentsCreator::StdMeshersGUI_NbSegmentsCreator()
   myDistr( 0 ),
   myScale( 0 ),
   myTable( 0 ),
+#ifndef DISABLE_PLOT2DVIEWER
   myPreview( 0 ),
+#endif
   myExpr( 0 ),
   myConvBox( 0 ),
   myConv( 0 ),
@@ -89,9 +94,10 @@ bool StdMeshersGUI_NbSegmentsCreator::checkParams( QString& msg ) const
   readParamsFromHypo( data_old );
   readParamsFromWidgets( data_new );
   bool res = storeParamsToHypo( data_new );
-  storeParamsToHypo( data_old );
   res = myNbSeg->isValid( msg, true ) && res;
   res = myScale->isValid( msg, true ) && res;
+  if ( !res )
+    storeParamsToHypo( data_old );
   return res;
 }
 
@@ -178,12 +184,14 @@ QFrame* StdMeshersGUI_NbSegmentsCreator::buildFrame()
   
        // c)  table
   myTable = new StdMeshersGUI_DistrTableFrame( GroupC1 );
+  myTable->setMinimumHeight(220);
   myDistLayout->addWidget( myTable, 1, 0, 2, 1 );
 
+#ifndef DISABLE_PLOT2DVIEWER
        // d) preview
   myPreview = new StdMeshersGUI_DistrPreview( GroupC1, h.in() );  
-  myPreview->setMinimumHeight(220);
   myDistLayout->addWidget( myPreview, 1, 1, 2, 1 );
+#endif
   
   // 5)  conversion (radiogroup)
   myConvBox = new QGroupBox( tr( "SMESH_CONV_MODE" ), GroupC1 );
@@ -214,21 +222,30 @@ QFrame* StdMeshersGUI_NbSegmentsCreator::buildFrame()
   QString aMainEntry = getMainShapeEntry();
   if ( aGeomEntry == "" )
     aGeomEntry = h->GetObjectEntry();
-  myDirectionWidget->SetGeomShapeEntry( aGeomEntry );
-  myDirectionWidget->SetMainShapeEntry( aMainEntry );
+  myDirectionWidget->SetGeomShapeEntry( aGeomEntry, aMainEntry );
   myDirectionWidget->SetListOfIDs( h->GetReversedEdges() );
   edgeLay->addWidget( myDirectionWidget );
 
   lay->addWidget( myReversedEdgesBox );
-  lay->setStretchFactor( GroupC1, 2);
+  lay->setStretchFactor( GroupC1, 1);
   lay->setStretchFactor( myReversedEdgesBox, 1);
-  
+
+  myReversedEdgesHelper = 0;
+  if ( !aGeomEntry.isEmpty() || !aMainEntry.isEmpty() )
+  {
+    myReversedEdgesHelper = new StdMeshersGUI_PropagationHelperWdg( myDirectionWidget, fr, false );
+    lay->addWidget( myReversedEdgesHelper );
+    lay->setStretchFactor( myReversedEdgesHelper, 1 );
+  }
+
   connect( myNbSeg, SIGNAL( valueChanged( const QString& ) ), this, SLOT( onValueChanged() ) );
   connect( myDistr, SIGNAL( activated( int ) ), this, SLOT( onValueChanged() ) );
   connect( myTable, SIGNAL( valueChanged( int, int ) ), this, SLOT( onValueChanged() ) );
   connect( myExpr,  SIGNAL( textChanged( const QString& ) ), this, SLOT( onValueChanged() ) );
   connect( myConv,  SIGNAL( buttonClicked( int ) ), this, SLOT( onValueChanged() ) );
 
+  onValueChanged();
+
   return fr;
 }
 
@@ -278,13 +295,13 @@ QString StdMeshersGUI_NbSegmentsCreator::storeParams() const
   case Regular :
     valStr += tr("SMESH_DISTR_REGULAR");
     break;
-  case Scale   : 
-    valStr += tr("SMESH_NB_SEGMENTS_SCALE_PARAM") + " = " + QString::number( data.myScale );\
+  case Scale   :
+    valStr += tr("SMESH_NB_SEGMENTS_SCALE_PARAM") + " = " + QString::number( data.myScale );
     break;
   case TabFunc : {
     //valStr += tr("SMESH_TAB_FUNC");
     bool param = true;
-    for( int i=0; i < data.myTable.length(); i++, param = !param ) {
+    for( CORBA::ULong i = 0; i < data.myTable.length(); i++, param = !param ) {
       if ( param )
         valStr += "[";
       valStr += QString::number( data.myTable[ i ]);
@@ -362,15 +379,16 @@ bool StdMeshersGUI_NbSegmentsCreator::storeParamsToHypo( const NbSegmentsHypothe
   try
   {
     if( isCreation() )
-      SMESH::SetName( SMESH::FindSObject( h ), h_data.myName.toLatin1().data() );
+      SMESH::SetName( SMESH::FindSObject( h ), h_data.myName.toUtf8().data() );
 
-    h->SetVarParameter( h_data.myNbSegVarName.toLatin1().constData(), "SetNumberOfSegments" );
+    h->SetVarParameter( h_data.myNbSegVarName.toUtf8().constData(), "SetNumberOfSegments" );
     h->SetNumberOfSegments( h_data.myNbSeg );
-    int distr = h_data.myDistrType;
-    h->SetDistrType( distr );
     
+    int distr = h_data.myDistrType;
+    if ( distr == 0 )
+      h->SetDistrType( distr ); // this is actually needed at non-uniform -> uniform switch
     if( distr==1 ) {
-      h->SetVarParameter( h_data.myScaleVarName.toLatin1().constData(), "SetScaleFactor" );
+      h->SetVarParameter( h_data.myScaleVarName.toUtf8().constData(), "SetScaleFactor" );
       h->SetScaleFactor( h_data.myScale );
     }
     if( distr==2 || distr==3 )
@@ -385,7 +403,7 @@ bool StdMeshersGUI_NbSegmentsCreator::storeParamsToHypo( const NbSegmentsHypothe
       h->SetTableFunction( h_data.myTable );
 
     if( distr==3 )
-      h->SetExpressionFunction( h_data.myExpr.toLatin1().data() );
+      h->SetExpressionFunction( h_data.myExpr.toUtf8().data() );
     //setting of function must follow after setConversionMode, because otherwise
     //the function will be checked with old conversion mode, so that it may occurs
     //unexpected errors for user
@@ -429,20 +447,27 @@ void StdMeshersGUI_NbSegmentsCreator::onValueChanged()
     myTable->setData( arr ); //update data in table
   }
 
-  myScale->setShown( distr==1 );
-  myLScale->setShown( distr==1 );
-  myReversedEdgesBox->setShown( !distr==0 );
-  myDirectionWidget->showPreview( !distr==0 );
+  myScale->setVisible( distr==1 );
+  myLScale->setVisible( distr==1 );
+  myReversedEdgesBox->setVisible( distr!=0 );
+  if ( myReversedEdgesHelper ) {
+    myReversedEdgesHelper->Clear();
+    myReversedEdgesHelper->setVisible( distr!=0 );
+  }
+  myDirectionWidget->ShowPreview( distr!=0 );
 
   bool isFunc = distr==2 || distr==3;
-  myPreview->setShown( isFunc );
-  myConvBox->setShown( isFunc );
+#ifndef DISABLE_PLOT2DVIEWER
+  myPreview->setVisible( isFunc );
+#endif
+  myConvBox->setVisible( isFunc );
   
-  myTable->setShown( distr==2 );
-  myExpr->setShown( distr==3 );
-  myLExpr->setShown( distr==3 );
-  myInfo->setShown( distr==3);
+  myTable->setVisible( distr==2 );
+  myExpr->setVisible( distr==3 );
+  myLExpr->setVisible( distr==3 );
+  myInfo->setVisible( distr==3);
 
+#ifndef DISABLE_PLOT2DVIEWER
   //change of preview
   int nbSeg = myNbSeg->value();
   if( distr==2 ) //preview for table-described function
@@ -456,6 +481,7 @@ void StdMeshersGUI_NbSegmentsCreator::onValueChanged()
 
   if( isFunc )
     myPreview->setConversion( StdMeshersGUI_DistrPreview::Conversion( myConv->checkedId() ) );
+#endif
 
   if ( (QtxComboBox*)sender() == myDistr && dlg() ) {
     QApplication::instance()->processEvents();