-// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#include "StdMeshers_ProjectionSource2D.hxx"
#include "StdMeshers_ProjectionSource3D.hxx"
+#include "SMDS_EdgePosition.hxx"
#include "SMESH_Algo.hxx"
#include "SMESH_Block.hxx"
#include "SMESH_Gen.hxx"
+#include "SMESH_HypoFilter.hxx"
#include "SMESH_Hypothesis.hxx"
#include "SMESH_Mesh.hxx"
#include "SMESH_MesherHelper.hxx"
#include "SMESH_subMesh.hxx"
#include "SMESH_subMeshEventListener.hxx"
-#include "SMDS_EdgePosition.hxx"
+#include "SMESH_MeshAlgos.hxx"
#include "utilities.h"
} // namespace
//=======================================================================
-/*!
- * \brief Looks for association of all sub-shapes of two shapes
- * \param theShape1 - target shape
- * \param theMesh1 - mesh built on shape 1
- * \param theShape2 - source shape
- * \param theMesh2 - mesh built on shape 2
- * \param theAssociation - association map to be filled that may
- * contain association of one or two pairs of vertices
- * \retval bool - true if association found
+/*
+ * Looks for association of all sub-shapes of two shapes
+ * \param theShape1 - target shape
+ * \param theMesh1 - mesh built on shape 1
+ * \param theShape2 - source shape
+ * \param theMesh2 - mesh built on shape 2
+ * \param theAssociation - association map to be filled that may
+ * contain association of one or two pairs of vertices
+ * \retval bool - true if association found
*/
//=======================================================================
TShapeShapeMap & theMap)
{
// Structure of this long function is following
- // 1) Group->group projection: theShape1 is a group member,
- // theShape2 is a group. We find a group theShape1 is in and recall self.
+ // 1) Group -> Group projection: theShape1 is a group member,
+ // theShape2 is another group. We find a group theShape1 is in and recall self.
// 2) Accosiate same shapes with different location (partners).
// 3) If vertex association is given, perform accosiation according to shape type:
// switch ( ShapeType ) {
TopTools_ListIteratorOfListOfShape ancestIt1( edgeToFace1.FindFromKey( edge1 ));
for ( ; F1.IsNull() && ancestIt1.More(); ancestIt1.Next() )
if ( ancestIt1.Value().ShapeType() == TopAbs_FACE )
- F1 = ancestIt1.Value().Oriented( TopAbs_FORWARD );
+ F1 = ancestIt1.Value().Oriented //( TopAbs_FORWARD );
+ ( SMESH_MesherHelper::GetSubShapeOri( theShape1, ancestIt1.Value() ));
if ( F1.IsNull() )
RETURN_BAD_RESULT(" Face1 not found");
TopTools_ListIteratorOfListOfShape ancestIt2( edgeToFace2.FindFromKey( edge2 ));
for ( int i = 0; FF2[1].IsNull() && ancestIt2.More(); ancestIt2.Next() )
if ( ancestIt2.Value().ShapeType() == TopAbs_FACE )
- FF2[ i++ ] = ancestIt2.Value().Oriented( TopAbs_FORWARD );
+ FF2[ i++ ] = ancestIt2.Value().Oriented // ( TopAbs_FORWARD );
+ ( SMESH_MesherHelper::GetSubShapeOri( theShape2, ancestIt2.Value() ));
// get oriented edge1 and edge2 from F1 and FF2[0]
for ( exp.Init( F1, TopAbs_EDGE ); exp.More(); exp.Next() )
// get outer edge of theShape1
TopoDS_Shape wire = OuterShape( face1, TopAbs_WIRE );
//edge1 = TopoDS::Edge( OuterShape( face1, TopAbs_EDGE ));
- map<int,TopoDS_Edge> propag_edges; // use map to find the closest propagation edge
+ // use map to find the closest propagation edge
+ map<int, pair< TopoDS_Edge, TopoDS_Edge > > propag_edges;
for ( TopoDS_Iterator edgeIt( wire ); edgeIt.More(); edgeIt.Next() )
{
edge1 = TopoDS::Edge( edgeIt.Value() );
edge2 = TopoDS::Edge( exp.Current() );
pair<int,TopoDS_Edge> step_edge = GetPropagationEdge( theMesh1, edge2, edge1 );
if ( !step_edge.second.IsNull() ) { // propagation found
- propag_edges.insert( step_edge );
+ propag_edges.insert( make_pair( step_edge.first,
+ ( make_pair( edge1, step_edge.second ))));
if ( step_edge.first == 1 ) break; // most close found
}
}
}
if ( !propag_edges.empty() ) // propagation found
{
- edge2 = propag_edges.begin()->second;
+ edge1 = propag_edges.begin()->second.first;
+ edge2 = propag_edges.begin()->second.second;
TopoDS_Vertex VV1[2], VV2[2];
TopExp::Vertices( edge1, VV1[0], VV1[1], true );
TopExp::Vertices( edge2, VV2[0], VV2[1], true );
}
//================================================================================
-/*!
- * \brief Find association of edges of faces
- * \param face1 - face 1
- * \param VV1 - vertices of face 1
- * \param face2 - face 2
- * \param VV2 - vertices of face 2 associated with ones of face 1
- * \param edges1 - out list of edges of face 1
- * \param edges2 - out list of edges of face 2
- * \retval int - nb of edges in an outer wire in a success case, else zero
+/*
+ * Find association of edges of faces
+ * \param face1 - face 1
+ * \param VV1 - vertices of face 1
+ * \param face2 - face 2
+ * \param VV2 - vertices of face 2 associated with ones of face 1
+ * \param edges1 - out list of edges of face 1
+ * \param edges2 - out list of edges of face 2
+ * \retval int - nb of edges in an outer wire in a success case, else zero
*/
//================================================================================
CONT_BAD_RESULT("GetOrderedEdges() failed");
}
}
- edgeIt = --edges2.end();
if ( !VV2[1].IsSame( TopExp::LastVertex( edges2.front(), true ))) {
reverse = !reverse;
+ edgeIt = --edges2.end();
+ // move a degenerated edge from back to front
+ // http://www.salome-platform.org/forum/forum_11/173031193
+ if ( TopExp::FirstVertex( *edgeIt ).IsSame( TopExp::LastVertex( *edgeIt ))) {
+ edges2.splice( edges2.begin(), edges2, edgeIt );
+ edgeIt = --edges2.end();
+ }
// check if the second vertex belongs to the first or last edge in the wire
if ( !VV2[1].IsSame( TopExp::FirstVertex( *edgeIt, true ))) {
bool KO = true; // belongs to none
// move edge2Beg to place before edge2End
edges2.splice( edge2End, edges2, edge2Beg++ );
- if ( sameVertexUV( *edge2Beg, face2, 0, v0f1UV, vTolUV ))
+ if ( edge2Beg != edges2.end() &&
+ sameVertexUV( *edge2Beg, face2, 0, v0f1UV, vTolUV ))
{
if ( iW1 == 0 ) OK = true; // OK is for the first wire
// reverse edges2 if needed
}
//=======================================================================
-/*!
- * \brief Inserts association theShape1 <-> theShape2 to TShapeShapeMap
- * \param theShape1 - target shape
- * \param theShape2 - source shape
- * \param theAssociationMap - association map
- * \retval bool - true if there was no association for these shapes before
+/*
+ * Inserts association theShape1 <-> theShape2 to TShapeShapeMap
+ * \param theShape1 - target shape
+ * \param theShape2 - source shape
+ * \param theAssociationMap - association map
+ * \retval bool - true if there was no association for these shapes before
*/
//=======================================================================
}
//=======================================================================
-/*!
- * \brief Finds an edge by its vertices in a main shape of the mesh
- * \param aMesh - the mesh
- * \param V1 - vertex 1
- * \param V2 - vertex 2
- * \retval TopoDS_Edge - found edge
+/*
+ * Finds an edge by its vertices in a main shape of the mesh
+ * \param aMesh - the mesh
+ * \param V1 - vertex 1
+ * \param V2 - vertex 2
+ * \retval TopoDS_Edge - found edge
*/
//=======================================================================
}
//================================================================================
-/*!
- * \brief Return another face sharing an edge
- * \param edgeToFaces - data map of descendants to ancestors
- * \param edge - edge
- * \param face - face
- * \retval TopoDS_Face - found face
+/*
+ * Return another face sharing an edge
+ * \param edgeToFaces - data map of descendants to ancestors
+ * \param edge - edge
+ * \param face - face
+ * \retval TopoDS_Face - found face
*/
//================================================================================
}
//================================================================================
-/*!
- * \brief Return other vertex of an edge
+/*
+ * Return other vertex of an edge
*/
//================================================================================
}
//================================================================================
-/*!
- * \brief Return a propagation edge
- * \param aMesh - mesh
- * \param theEdge - edge to find by propagation
- * \param fromEdge - start edge for propagation
- * \retval pair<int,TopoDS_Edge> - propagation step and found edge
+/*
+ * Return a propagation edge
+ * \param aMesh - mesh
+ * \param anEdge - edge to find by propagation
+ * \param fromEdge - start edge for propagation
+ * \param chain - return, if !NULL, a propagation chain passed till
+ * anEdge; if anEdge.IsNull() then a full propagation chain is returned;
+ * fromEdge is the 1st in the chain
+ * \retval pair<int,TopoDS_Edge> - propagation step and found edge
*/
//================================================================================
pair<int,TopoDS_Edge>
-StdMeshers_ProjectionUtils::GetPropagationEdge( SMESH_Mesh* aMesh,
- const TopoDS_Edge& theEdge,
- const TopoDS_Edge& fromEdge)
+StdMeshers_ProjectionUtils::GetPropagationEdge( SMESH_Mesh* aMesh,
+ const TopoDS_Edge& anEdge,
+ const TopoDS_Edge& fromEdge,
+ TopTools_IndexedMapOfShape* chain)
{
- TopTools_IndexedMapOfShape aChain;
+ TopTools_IndexedMapOfShape locChain;
+ TopTools_IndexedMapOfShape& aChain = chain ? *chain : locChain;
int step = 0;
+ //TopTools_IndexedMapOfShape checkedWires;
+ BRepTools_WireExplorer aWE;
+ TopoDS_Shape fourEdges[4];
+
// List of edges, added to chain on the previous cycle pass
TopTools_ListOfShape listPrevEdges;
- listPrevEdges.Append(fromEdge);
+ listPrevEdges.Append( fromEdge );
+ aChain.Add( fromEdge );
// Collect all edges pass by pass
- while (listPrevEdges.Extent() > 0) {
+ while (listPrevEdges.Extent() > 0)
+ {
step++;
// List of edges, added to chain on this cycle pass
TopTools_ListOfShape listCurEdges;
// Find the next portion of edges
TopTools_ListIteratorOfListOfShape itE (listPrevEdges);
- for (; itE.More(); itE.Next()) {
- TopoDS_Shape anE = itE.Value();
+ for (; itE.More(); itE.Next())
+ {
+ const TopoDS_Shape& anE = itE.Value();
// Iterate on faces, having edge <anE>
TopTools_ListIteratorOfListOfShape itA (aMesh->GetAncestors(anE));
- for (; itA.More(); itA.Next()) {
- TopoDS_Shape aW = itA.Value();
+ for (; itA.More(); itA.Next())
+ {
+ const TopoDS_Shape& aW = itA.Value();
// There are objects of different type among the ancestors of edge
- if (aW.ShapeType() == TopAbs_WIRE) {
- TopoDS_Shape anOppE;
-
- BRepTools_WireExplorer aWE (TopoDS::Wire(aW));
- Standard_Integer nb = 1, found = 0;
- TopTools_Array1OfShape anEdges (1,4);
- for (; aWE.More(); aWE.Next(), nb++) {
- if (nb > 4) {
- found = 0;
+ if ( aW.ShapeType() == TopAbs_WIRE /*&& checkedWires.Add( aW )*/)
+ {
+ Standard_Integer nb = 0, found = -1;
+ for ( aWE.Init( TopoDS::Wire( aW )); aWE.More(); aWE.Next() ) {
+ if (nb+1 > 4) {
+ found = -1;
break;
}
- anEdges(nb) = aWE.Current();
- if (anEdges(nb).IsSame(anE)) found = nb;
+ fourEdges[ nb ] = aWE.Current();
+ if ( aWE.Current().IsSame( anE )) found = nb;
+ nb++;
}
-
- if (nb == 5 && found > 0) {
+ if (nb == 4 && found >= 0) {
// Quadrangle face found, get an opposite edge
- Standard_Integer opp = found + 2;
- if (opp > 4) opp -= 4;
- anOppE = anEdges(opp);
+ TopoDS_Shape& anOppE = fourEdges[( found + 2 ) % 4 ];
// add anOppE to aChain if ...
- if (!aChain.Contains(anOppE)) { // ... anOppE is not in aChain
+ int prevChainSize = aChain.Extent();
+ if ( aChain.Add(anOppE) > prevChainSize ) { // ... anOppE is not in aChain
// Add found edge to the chain oriented so that to
// have it co-directed with a forward MainEdge
TopAbs_Orientation ori = anE.Orientation();
- if ( anEdges(opp).Orientation() == anEdges(found).Orientation() )
+ if ( anOppE.Orientation() == fourEdges[found].Orientation() )
ori = TopAbs::Reverse( ori );
anOppE.Orientation( ori );
- if ( anOppE.IsSame( theEdge ))
+ if ( anOppE.IsSame( anEdge ))
return make_pair( step, TopoDS::Edge( anOppE ));
- aChain.Add(anOppE);
listCurEdges.Append(anOppE);
}
- } // if (nb == 5 && found > 0)
+ } // if (nb == 4 && found >= 0)
} // if (aF.ShapeType() == TopAbs_WIRE)
- } // for (; itF.More(); itF.Next())
- } // for (; itE.More(); itE.Next())
+ } // loop on ancestors of anE
+ } // loop on listPrevEdges
listPrevEdges = listCurEdges;
} // while (listPrevEdges.Extent() > 0)
}
//================================================================================
- /*!
- * \brief Find corresponding nodes on two faces
- * \param face1 - the first face
- * \param mesh1 - mesh containing elements on the first face
- * \param face2 - the second face
- * \param mesh2 - mesh containing elements on the second face
- * \param assocMap - map associating sub-shapes of the faces
- * \param node1To2Map - map containing found matching nodes
- * \retval bool - is a success
- */
+/*
+ * Find corresponding nodes on two faces
+ * \param face1 - the first face
+ * \param mesh1 - mesh containing elements on the first face
+ * \param face2 - the second face
+ * \param mesh2 - mesh containing elements on the second face
+ * \param assocMap - map associating sub-shapes of the faces
+ * \param node1To2Map - map containing found matching nodes
+ * \retval bool - is a success
+ */
//================================================================================
bool StdMeshers_ProjectionUtils::
{
SMESHDS_Mesh* meshDS1 = mesh1->GetMeshDS();
SMESHDS_Mesh* meshDS2 = mesh2->GetMeshDS();
-
+
SMESH_MesherHelper helper1( *mesh1 );
SMESH_MesherHelper helper2( *mesh2 );
TIDSortedElemSet inSet, notInSet;
const SMDS_MeshElement* f1 =
- SMESH_MeshEditor::FindFaceInSet( vNode, eNode, inSet, notInSet );
+ SMESH_MeshAlgos::FindFaceInSet( vNode, eNode, inSet, notInSet );
if ( !f1 ) RETURN_BAD_RESULT("The first face on seam not found");
notInSet.insert( f1 );
const SMDS_MeshElement* f2 =
- SMESH_MeshEditor::FindFaceInSet( vNode, eNode, inSet, notInSet );
+ SMESH_MeshAlgos::FindFaceInSet( vNode, eNode, inSet, notInSet );
if ( !f2 ) RETURN_BAD_RESULT("The second face on seam not found");
// select a face with less UV of vNode
for ( int i = 0; i < nbNodes; ++i ) {
const SMDS_MeshNode* n1 = faceToKeep->GetNode( i );
const SMDS_MeshNode* n2 = faceToKeep->GetNode(( i+1 ) % nbNodes );
- f1 = SMESH_MeshEditor::FindFaceInSet( n1, n2, inSet, notInSet );
+ f1 = SMESH_MeshAlgos::FindFaceInSet( n1, n2, inSet, notInSet );
if ( f1 )
elems.insert( f1 );
}
node1To2Map.insert( make_pair( vNode1, vNode2 ));
}
-// don't know why this condition is usually true :(
-// if ( node1To2Map.size() * quadFactor < SM1->NbNodes() )
-// MESSAGE("FindMatchingNodes() found too few node pairs starting from nodes ("
-// << vNode1->GetID() << " - " << eNode1[0]->GetID() << ") ("
-// << vNode2->GetID() << " - " << eNode2[0]->GetID() << "):"
-// << node1To2Map.size() * quadFactor << " < " << SM1->NbNodes());
-
+ // don't know why this condition is usually true :(
+ // if ( node1To2Map.size() * quadFactor < SM1->NbNodes() )
+ // MESSAGE("FindMatchingNodes() found too few node pairs starting from nodes ("
+ // << vNode1->GetID() << " - " << eNode1[0]->GetID() << ") ("
+ // << vNode2->GetID() << " - " << eNode2[0]->GetID() << "):"
+ // << node1To2Map.size() * quadFactor << " < " << SM1->NbNodes());
+
return true;
}
//================================================================================
- /*!
- * \brief Return any sub-shape of a face belonging to the outer wire
- * \param face - the face
- * \param type - type of sub-shape to return
- * \retval TopoDS_Shape - the found sub-shape
- */
+/*
+ * Return any sub-shape of a face belonging to the outer wire
+ * \param face - the face
+ * \param type - type of sub-shape to return
+ * \retval TopoDS_Shape - the found sub-shape
+ */
//================================================================================
TopoDS_Shape StdMeshers_ProjectionUtils::OuterShape( const TopoDS_Face& face,
}
//================================================================================
- /*!
- * \brief Check that submesh is computed and try to compute it if is not
- * \param sm - submesh to compute
- * \param iterationNb - int used to stop infinite recursive call
- * \retval bool - true if computed
- */
+/*
+ * Check that sub-mesh is computed and try to compute it if is not
+ * \param sm - sub-mesh to compute
+ * \param iterationNb - int used to stop infinite recursive call
+ * \retval bool - true if computed
+ */
//================================================================================
bool StdMeshers_ProjectionUtils::MakeComputed(SMESH_subMesh * sm, const int iterationNb)
if ( sm->IsMeshComputed() )
return true;
- SMESH_Mesh* mesh = sm->GetFather();
- SMESH_Gen* gen = mesh->GetGen();
- SMESH_Algo* algo = sm->GetAlgo();
+ SMESH_Mesh* mesh = sm->GetFather();
+ SMESH_Gen* gen = mesh->GetGen();
+ SMESH_Algo* algo = sm->GetAlgo();
+ TopoDS_Shape shape = sm->GetSubShape();
if ( !algo )
{
- if ( sm->GetSubShape().ShapeType() != TopAbs_COMPOUND )
- RETURN_BAD_RESULT("No algo assigned to submesh " << sm->GetId());
- // group
- bool computed = true;
- for ( TopoDS_Iterator grMember( sm->GetSubShape() ); grMember.More(); grMember.Next())
- if ( SMESH_subMesh* grSub = mesh->GetSubMesh( grMember.Value() ))
- if ( !MakeComputed( grSub, iterationNb + 1 ))
- computed = false;
- return computed;
+ if ( shape.ShapeType() != TopAbs_COMPOUND )
+ {
+ // No algo assigned to a non-compound sub-mesh.
+ // Try to find an all-dimensional algo of an upper dimension
+ int dim = gen->GetShapeDim( shape );
+ for ( ++dim; ( dim <= 3 && !algo ); ++dim )
+ {
+ SMESH_HypoFilter hypoFilter( SMESH_HypoFilter::IsAlgo() );
+ hypoFilter.And( SMESH_HypoFilter::HasDim( dim ));
+ list <const SMESHDS_Hypothesis * > hyps;
+ list< TopoDS_Shape > assignedTo;
+ int nbAlgos =
+ mesh->GetHypotheses( shape, hypoFilter, hyps, true, &assignedTo );
+ if ( nbAlgos > 1 ) // concurrent algos
+ {
+ list<SMESH_subMesh*> smList; // where an algo is assigned
+ list< TopoDS_Shape >::iterator shapeIt = assignedTo.begin();
+ for ( ; shapeIt != assignedTo.end(); ++shapeIt )
+ smList.push_back( mesh->GetSubMesh( *shapeIt ));
+
+ mesh->SortByMeshOrder( smList );
+ algo = smList.front()->GetAlgo();
+ shape = smList.front()->GetSubShape();
+ }
+ else if ( nbAlgos == 1 )
+ {
+ algo = (SMESH_Algo*) hyps.front();
+ shape = assignedTo.front();
+ }
+ }
+ if ( !algo )
+ return false;
+ }
+ else
+ {
+ // group
+ bool computed = true;
+ for ( TopoDS_Iterator grMember( shape ); grMember.More(); grMember.Next())
+ if ( SMESH_subMesh* grSub = mesh->GetSubMesh( grMember.Value() ))
+ if ( !MakeComputed( grSub, iterationNb + 1 ))
+ computed = false;
+ return computed;
+ }
}
string algoType = algo->GetName();
if ( algoType.substr(0, 11) != "Projection_")
- return gen->Compute( *mesh, sm->GetSubShape() );
+ return gen->Compute( *mesh, shape, /*shapeOnly=*/true );
// try to compute source mesh
const list <const SMESHDS_Hypothesis *> & hyps =
- algo->GetUsedHypothesis( *mesh, sm->GetSubShape() );
+ algo->GetUsedHypothesis( *mesh, shape );
TopoDS_Shape srcShape;
SMESH_Mesh* srcMesh = 0;
}
}
if ( srcShape.IsNull() ) // no projection source defined
- return gen->Compute( *mesh, sm->GetSubShape() );
+ return gen->Compute( *mesh, shape, /*shapeOnly=*/true );
- if ( srcShape.IsSame( sm->GetSubShape() ))
+ if ( srcShape.IsSame( shape ))
RETURN_BAD_RESULT("Projection from self");
if ( !srcMesh )
srcMesh = mesh;
if ( MakeComputed( srcMesh->GetSubMesh( srcShape ), iterationNb + 1 ) &&
- gen->Compute( *mesh, sm->GetSubShape() ))
+ gen->Compute( *mesh, shape, /*shapeOnly=*/true ))
return sm->IsMeshComputed();
return false;
}
+
+//================================================================================
+/*
+ * Returns an error message to show in case if MakeComputed( sm ) fails.
+ */
+//================================================================================
+
+std::string StdMeshers_ProjectionUtils::SourceNotComputedError( SMESH_subMesh * sm,
+ SMESH_Algo* projAlgo )
+{
+ const char usualMessage [] = "Source mesh not computed";
+ if ( !projAlgo )
+ return usualMessage;
+ if ( !sm || sm->GetAlgoState() != SMESH_subMesh::NO_ALGO )
+ return usualMessage; // algo is OK, anything else is KO.
+
+ // Try to find a type of all-dimentional algorithm that would compute the
+ // given sub-mesh if it could be launched before projection
+ const TopoDS_Shape shape = sm->GetSubShape();
+ const int shapeDim = SMESH_Gen::GetShapeDim( shape );
+
+ for ( int dimIncrement = 1; shapeDim + dimIncrement < 4; ++dimIncrement )
+ {
+ SMESH_HypoFilter filter( SMESH_HypoFilter::IsAlgo() );
+ filter.And( filter.HasDim( shapeDim + dimIncrement ));
+
+ SMESH_Algo* algo = (SMESH_Algo*) sm->GetFather()->GetHypothesis( shape, filter, true );
+ if ( algo && !algo->NeedDiscreteBoundary() )
+ return SMESH_Comment("\"")
+ << algo->GetFeatures()._label << "\""
+ << " can't be used to compute the source mesh for \""
+ << projAlgo->GetFeatures()._label << "\" in this case";
+ }
+ return usualMessage;
+}
+
//================================================================================
-/*!
- * \brief Return a boundary EDGE (or all boundary EDGEs) of edgeContainer
+/*
+ * Return a boundary EDGE (or all boundary EDGEs) of edgeContainer
*/
//================================================================================
}
//================================================================================
-/*!
- * \brief Set event listeners to submesh with projection algo
- * \param subMesh - submesh with projection algo
- * \param srcShape - source shape
- * \param srcMesh - source mesh
+/*
+ * Set event listeners to submesh with projection algo
+ * \param subMesh - submesh with projection algo
+ * \param srcShape - source shape
+ * \param srcMesh - source mesh
*/
//================================================================================