-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
algo->myProxyMesh->GetMesh() != helper->GetMesh() )
algo->myProxyMesh.reset( new SMESH_ProxyMesh( *helper->GetMesh() ));
- algo->myQuadStruct.reset();
+ algo->myQuadList.clear();
if ( helper )
algo->_quadraticMesh = helper->GetIsQuadratic();
return algo;
}
};
+ //=======================================================================
+ /*!
+ * \brief Returns already computed EDGEs
+ */
+ void getPrecomputedEdges( SMESH_MesherHelper& theHelper,
+ const TopoDS_Shape& theShape,
+ vector< TopoDS_Edge >& theEdges)
+ {
+ theEdges.clear();
+
+ SMESHDS_Mesh* meshDS = theHelper.GetMeshDS();
+ SMESHDS_SubMesh* sm;
+
+ TopTools_IndexedMapOfShape edges;
+ TopExp::MapShapes( theShape, TopAbs_EDGE, edges );
+ for ( int iE = 1; iE <= edges.Extent(); ++iE )
+ {
+ const TopoDS_Shape edge = edges( iE );
+ if (( ! ( sm = meshDS->MeshElements( edge ))) ||
+ ( sm->NbElements() == 0 ))
+ continue;
+
+ // there must not be FACEs meshed with triangles and sharing a computed EDGE
+ // as the precomputed EDGEs are used for propagation other to 'vertical' EDGEs
+ bool faceFound = false;
+ PShapeIteratorPtr faceIt =
+ theHelper.GetAncestors( edge, *theHelper.GetMesh(), TopAbs_FACE );
+ while ( const TopoDS_Shape* face = faceIt->next() )
+
+ if (( sm = meshDS->MeshElements( *face )) &&
+ ( sm->NbElements() > 0 ) &&
+ ( !theHelper.IsSameElemGeometry( sm, SMDSGeom_QUADRANGLE ) ))
+ {
+ faceFound;
+ break;
+ }
+ if ( !faceFound )
+ theEdges.push_back( TopoDS::Edge( edge ));
+ }
+ }
//================================================================================
/*!
//================================================================================
bool setBottomEdge( const TopoDS_Edge& botE,
- faceQuadStruct::Ptr& quad,
+ FaceQuadStruct::Ptr& quad,
const TopoDS_Shape& face)
{
- quad->side[ QUAD_TOP_SIDE ]->Reverse();
- quad->side[ QUAD_LEFT_SIDE ]->Reverse();
+ quad->side[ QUAD_TOP_SIDE ].grid->Reverse();
+ quad->side[ QUAD_LEFT_SIDE ].grid->Reverse();
int edgeIndex = 0;
for ( size_t i = 0; i < quad->side.size(); ++i )
{
- StdMeshers_FaceSide* quadSide = quad->side[i];
+ StdMeshers_FaceSidePtr quadSide = quad->side[i];
for ( int iE = 0; iE < quadSide->NbEdges(); ++iE )
if ( botE.IsSame( quadSide->Edge( iE )))
{
compute( prism ));
}
+ // find propagation chains from already computed EDGEs
+ vector< TopoDS_Edge > computedEdges;
+ getPrecomputedEdges( helper, theShape, computedEdges );
+ myPropagChains = new TopTools_IndexedMapOfShape[ computedEdges.size() + 1 ];
+ SMESHUtils::ArrayDeleter< TopTools_IndexedMapOfShape > pcDel( myPropagChains );
+ for ( size_t i = 0, nb = 0; i < computedEdges.size(); ++i )
+ {
+ StdMeshers_ProjectionUtils::GetPropagationEdge( &theMesh, TopoDS_Edge(),
+ computedEdges[i], myPropagChains + nb );
+ if ( myPropagChains[ nb ].Extent() < 2 ) // an empty map is a termination sign
+ myPropagChains[ nb ].Clear();
+ else
+ nb++;
+ }
+
TopTools_MapOfShape meshedSolids;
list< Prism_3D::TPrismTopo > meshedPrism;
TopTools_ListIteratorOfListOfShape solidIt;
!compute( prism ))
return false;
- meshedFaces.push_front( prism.myTop );
+ SMESHDS_SubMesh* smDS = theMesh.GetMeshDS()->MeshElements( prism.myTop );
+ if ( !myHelper->IsSameElemGeometry( smDS, SMDSGeom_QUADRANGLE ))
+ {
+ meshedFaces.push_front( prism.myTop );
+ }
meshedPrism.push_back( prism );
}
}
continue; // already computed prism
}
// find a source FACE of the SOLID: it's a FACE sharing a bottom EDGE with wFace
- const TopoDS_Edge& wEdge = (*wQuad)->side[ QUAD_TOP_SIDE ]->Edge(0);
+ const TopoDS_Edge& wEdge = (*wQuad)->side[ QUAD_TOP_SIDE ].grid->Edge(0);
PShapeIteratorPtr faceIt = myHelper->GetAncestors( wEdge, *myHelper->GetMesh(),
TopAbs_FACE);
while ( const TopoDS_Shape* f = faceIt->next() )
prism.myBottom = candidateF;
mySetErrorToSM = false;
if ( !myHelper->IsSubShape( candidateF, prismIt->myShape3D ) &&
+ myHelper->IsSubShape( candidateF, solid ) &&
!myHelper->GetMesh()->GetSubMesh( candidateF )->IsMeshComputed() &&
initPrism( prism, solid ) &&
project2dMesh( prismIt->myBottom, candidateF))
mySetErrorToSM = true;
if ( !compute( prism ))
return false;
- meshedFaces.push_front( prism.myTop );
- meshedFaces.push_front( prism.myBottom );
+ SMESHDS_SubMesh* smDS = theMesh.GetMeshDS()->MeshElements( prism.myTop );
+ if ( !myHelper->IsSameElemGeometry( smDS, SMDSGeom_QUADRANGLE ))
+ {
+ meshedFaces.push_front( prism.myTop );
+ meshedFaces.push_front( prism.myBottom );
+ }
meshedPrism.push_back( prism );
meshedSolids.Add( solid );
}
int nbKnownFaces;
do {
nbKnownFaces = faceMap.Extent();
- StdMeshers_FaceSide *rightSide, *topSide; // sides of the quad
+ StdMeshers_FaceSidePtr rightSide, topSide; // sides of the quad
for ( size_t i = 0; i < thePrism.myWallQuads.size(); ++i )
{
rightSide = thePrism.myWallQuads[i].back()->side[ QUAD_RIGHT_SIDE ];
{
for ( size_t i = 0; i < thePrism.myWallQuads.size(); ++i )
{
- StdMeshers_FaceSide* topSide = thePrism.myWallQuads[i].back()->side[ QUAD_TOP_SIDE ];
- const TopoDS_Edge & topE = topSide->Edge( 0 );
+ StdMeshers_FaceSidePtr topSide = thePrism.myWallQuads[i].back()->side[ QUAD_TOP_SIDE ];
+ const TopoDS_Edge & topE = topSide->Edge( 0 );
if ( topSide->NbEdges() > 1 )
return toSM( error(COMPERR_BAD_SHAPE, TCom("Side face #") <<
shapeID( thePrism.myWallQuads[i].back()->face )
// Check that the top FACE shares all the top EDGEs
for ( size_t i = 0; i < thePrism.myWallQuads.size(); ++i )
{
- StdMeshers_FaceSide* topSide = thePrism.myWallQuads[i].back()->side[ QUAD_TOP_SIDE ];
- const TopoDS_Edge & topE = topSide->Edge( 0 );
+ StdMeshers_FaceSidePtr topSide = thePrism.myWallQuads[i].back()->side[ QUAD_TOP_SIDE ];
+ const TopoDS_Edge & topE = topSide->Edge( 0 );
if ( !myHelper->IsSubShape( topE, thePrism.myTop ))
return toSM( error( TCom("Wrong source face (#") << shapeID( thePrism.myBottom )));
}
SMESHDS_Mesh* meshDS = myHelper->GetMeshDS();
DBGOUT( endl << "COMPUTE Prism " << meshDS->ShapeToIndex( thePrism.myShape3D ));
- TProjction1dAlgo* projector1D = TProjction1dAlgo::instance( this );
+ TProjction1dAlgo* projector1D = TProjction1dAlgo::instance( this );
StdMeshers_Quadrangle_2D* quadAlgo = TQuadrangleAlgo::instance( this, myHelper );
SMESH_HypoFilter hyp1dFilter( SMESH_HypoFilter::IsAlgo(),/*not=*/true);
int wgt = 0; // "weight"
for ( ; quad != thePrism.myWallQuads[iW].end(); ++quad )
{
- StdMeshers_FaceSide* lftSide = (*quad)->side[ QUAD_LEFT_SIDE ];
+ StdMeshers_FaceSidePtr lftSide = (*quad)->side[ QUAD_LEFT_SIDE ];
for ( int i = 0; i < lftSide->NbEdges(); ++i )
{
++wgt;
quad = thePrism.myWallQuads[iW].begin();
for ( ; quad != thePrism.myWallQuads[iW].end(); ++quad )
for ( int i = 0; i < NB_QUAD_SIDES; ++i )
- (*quad)->side[ i ]->SetIgnoreMediumNodes( true );
+ (*quad)->side[ i ].grid->SetIgnoreMediumNodes( true );
}
}
Prism_3D::TQuadList::const_iterator quad = quads.begin();
for ( ; quad != quads.end(); ++quad )
{
- StdMeshers_FaceSide* rgtSide = (*quad)->side[ QUAD_RIGHT_SIDE ]; // tgt
- StdMeshers_FaceSide* lftSide = (*quad)->side[ QUAD_LEFT_SIDE ]; // src
+ StdMeshers_FaceSidePtr rgtSide = (*quad)->side[ QUAD_RIGHT_SIDE ]; // tgt
+ StdMeshers_FaceSidePtr lftSide = (*quad)->side[ QUAD_LEFT_SIDE ]; // src
bool swapLeftRight = ( lftSide->NbSegments( /*update=*/true ) == 0 &&
rgtSide->NbSegments( /*update=*/true ) > 0 );
if ( swapLeftRight )
SMESH_subMesh* srcSM = mesh->GetSubMesh( srcE );
if ( !srcSM->IsMeshComputed() ) {
DBGOUT( "COMPUTE V edge " << srcSM->GetId() );
- srcSM->ComputeSubMeshStateEngine( SMESH_subMesh::COMPUTE );
- srcSM->ComputeStateEngine ( SMESH_subMesh::COMPUTE );
+ TopoDS_Edge prpgSrcE = findPropagationSource( srcE );
+ if ( !prpgSrcE.IsNull() ) {
+ srcSM->ComputeSubMeshStateEngine( SMESH_subMesh::COMPUTE );
+ projector1D->myHyp.SetSourceEdge( prpgSrcE );
+ projector1D->Compute( *mesh, srcE );
+ srcSM->ComputeStateEngine( SMESH_subMesh::CHECK_COMPUTE_STATE );
+ }
+ else {
+ srcSM->ComputeSubMeshStateEngine( SMESH_subMesh::COMPUTE );
+ srcSM->ComputeStateEngine ( SMESH_subMesh::COMPUTE );
+ }
if ( !srcSM->IsMeshComputed() )
return toSM( error( "Can't compute 1D mesh" ));
}
// to compute stuctured quad mesh on wall FACEs
// ---------------------------------------------------
{
- const TopoDS_Edge& botE = (*quad)->side[ QUAD_BOTTOM_SIDE ]->Edge(0);
- const TopoDS_Edge& topE = (*quad)->side[ QUAD_TOP_SIDE ]->Edge(0);
+ const TopoDS_Edge& botE = (*quad)->side[ QUAD_BOTTOM_SIDE ].grid->Edge(0);
+ const TopoDS_Edge& topE = (*quad)->side[ QUAD_TOP_SIDE ].grid->Edge(0);
SMESH_subMesh* botSM = mesh->GetSubMesh( botE );
SMESH_subMesh* topSM = mesh->GetSubMesh( topE );
SMESH_subMesh* srcSM = botSM;
return true;
}
+//=======================================================================
+/*!
+ * \brief Returns a source EDGE of propagation to a given EDGE
+ */
+//=======================================================================
+
+TopoDS_Edge StdMeshers_Prism_3D::findPropagationSource( const TopoDS_Edge& E )
+{
+ for ( size_t i = 0; !myPropagChains[i].IsEmpty(); ++i )
+ if ( myPropagChains[i].Contains( E ))
+ return TopoDS::Edge( myPropagChains[i].FindKey( 1 ));
+
+ return TopoDS_Edge();
+}
+
//=======================================================================
//function : Evaluate
//purpose :
return myHelper->GetMeshDS()->ShapeToIndex( S );
}
+namespace // utils used by StdMeshers_Prism_3D::IsApplicable()
+{
+ struct EdgeWithNeighbors
+ {
+ TopoDS_Edge _edge;
+ int _iL, _iR;
+ EdgeWithNeighbors(const TopoDS_Edge& E, int iE, int nbE, int shift = 0 ):
+ _edge( E ),
+ _iL( SMESH_MesherHelper::WrapIndex( iE-1, nbE ) + shift ),
+ _iR( SMESH_MesherHelper::WrapIndex( iE+1, nbE ) + shift )
+ {
+ }
+ EdgeWithNeighbors() {}
+ };
+ struct PrismSide
+ {
+ TopoDS_Face _face;
+ TopTools_IndexedMapOfShape *_faces; // pointer because its copy constructor is private
+ TopoDS_Edge _topEdge;
+ vector< EdgeWithNeighbors >*_edges;
+ int _iBotEdge;
+ vector< bool > _isCheckedEdge;
+ int _nbCheckedEdges; // nb of EDGEs whose location is defined
+ PrismSide *_leftSide;
+ PrismSide *_rightSide;
+ const TopoDS_Edge& Edge( int i ) const
+ {
+ return (*_edges)[ i ]._edge;
+ }
+ int FindEdge( const TopoDS_Edge& E ) const
+ {
+ for ( size_t i = 0; i < _edges->size(); ++i )
+ if ( E.IsSame( Edge( i ))) return i;
+ return -1;
+ }
+ };
+ //--------------------------------------------------------------------------------
+ /*!
+ * \brief Return ordered edges of a face
+ */
+ bool getEdges( const TopoDS_Face& face,
+ vector< EdgeWithNeighbors > & edges,
+ const bool noHolesAllowed)
+ {
+ list< TopoDS_Edge > ee;
+ list< int > nbEdgesInWires;
+ int nbW = SMESH_Block::GetOrderedEdges( face, ee, nbEdgesInWires );
+ if ( nbW > 1 && noHolesAllowed )
+ return false;
+
+ int iE, nbTot = 0;
+ list< TopoDS_Edge >::iterator e = ee.begin();
+ list< int >::iterator nbE = nbEdgesInWires.begin();
+ for ( ; nbE != nbEdgesInWires.end(); ++nbE )
+ for ( iE = 0; iE < *nbE; ++e, ++iE )
+ if ( SMESH_Algo::isDegenerated( *e ))
+ {
+ ee.erase( e );
+ --(*nbE);
+ --iE;
+ }
+ else
+ {
+ e->Orientation( TopAbs_FORWARD ); // for operator==() to work
+ }
+
+ edges.clear();
+ e = ee.begin();
+ for ( nbE = nbEdgesInWires.begin(); nbE != nbEdgesInWires.end(); ++nbE )
+ {
+ for ( iE = 0; iE < *nbE; ++e, ++iE )
+ edges.push_back( EdgeWithNeighbors( *e, iE, *nbE, nbTot ));
+ nbTot += *nbE;
+ }
+ return edges.size();
+ }
+ //--------------------------------------------------------------------------------
+ /*!
+ * \brief Return another faces sharing an edge
+ */
+ const TopoDS_Shape & getAnotherFace( const TopoDS_Face& face,
+ const TopoDS_Edge& edge,
+ TopTools_IndexedDataMapOfShapeListOfShape& facesOfEdge)
+ {
+ TopTools_ListIteratorOfListOfShape faceIt( facesOfEdge.FindFromKey( edge ));
+ for ( ; faceIt.More(); faceIt.Next() )
+ if ( !face.IsSame( faceIt.Value() ))
+ return faceIt.Value();
+ return face;
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Return true if the algorithm can mesh this shape
+ * \param [in] aShape - shape to check
+ * \param [in] toCheckAll - if true, this check returns OK if all shapes are OK,
+ * else, returns OK if at least one shape is OK
+ */
+//================================================================================
+
+bool StdMeshers_Prism_3D::IsApplicable(const TopoDS_Shape & shape, bool toCheckAll)
+{
+ TopExp_Explorer sExp( shape, TopAbs_SOLID );
+ if ( !sExp.More() )
+ return false;
+
+ for ( ; sExp.More(); sExp.Next() )
+ {
+ // check nb shells
+ TopoDS_Shape shell;
+ TopExp_Explorer shExp( sExp.Current(), TopAbs_SHELL );
+ if ( shExp.More() ) {
+ shell = shExp.Current();
+ shExp.Next();
+ if ( shExp.More() )
+ shell.Nullify();
+ }
+ if ( shell.IsNull() ) {
+ if ( toCheckAll ) return false;
+ continue;
+ }
+ // get all faces
+ TopTools_IndexedMapOfShape allFaces;
+ TopExp::MapShapes( shell, TopAbs_FACE, allFaces );
+ if ( allFaces.Extent() < 3 ) {
+ if ( toCheckAll ) return false;
+ continue;
+ }
+ // is a box?
+ if ( allFaces.Extent() == 6 )
+ {
+ TopTools_IndexedMapOfOrientedShape map;
+ bool isBox = SMESH_Block::FindBlockShapes( TopoDS::Shell( shell ),
+ TopoDS_Vertex(), TopoDS_Vertex(), map );
+ if ( isBox ) {
+ if ( !toCheckAll ) return true;
+ continue;
+ }
+ }
+#ifdef _DEBUG_
+ TopTools_IndexedMapOfShape allShapes;
+ TopExp::MapShapes( shape, allShapes );
+#endif
+
+ TopTools_IndexedDataMapOfShapeListOfShape facesOfEdge;
+ TopTools_ListIteratorOfListOfShape faceIt;
+ TopExp::MapShapesAndAncestors( sExp.Current(), TopAbs_EDGE, TopAbs_FACE , facesOfEdge );
+ if ( facesOfEdge.IsEmpty() ) {
+ if ( toCheckAll ) return false;
+ continue;
+ }
+
+ typedef vector< EdgeWithNeighbors > TEdgeWithNeighborsVec;
+ vector< TEdgeWithNeighborsVec > faceEdgesVec( allFaces.Extent() + 1 );
+ TopTools_IndexedMapOfShape* facesOfSide = new TopTools_IndexedMapOfShape[ faceEdgesVec.size() ];
+ SMESHUtils::ArrayDeleter<TopTools_IndexedMapOfShape> delFacesOfSide( facesOfSide );
+
+ // try to use each face as a bottom one
+ bool prismDetected = false;
+ for ( int iF = 1; iF < allFaces.Extent() && !prismDetected; ++iF )
+ {
+ const TopoDS_Face& botF = TopoDS::Face( allFaces( iF ));
+
+ TEdgeWithNeighborsVec& botEdges = faceEdgesVec[ iF ];
+ if ( botEdges.empty() )
+ {
+ if ( !getEdges( botF, botEdges, /*noHoles=*/false ))
+ break;
+ if ( allFaces.Extent()-1 <= (int) botEdges.size() )
+ continue; // all faces are adjacent to botF - no top FACE
+ }
+ // init data of side FACEs
+ vector< PrismSide > sides( botEdges.size() );
+ for ( int iS = 0; iS < botEdges.size(); ++iS )
+ {
+ sides[ iS ]._topEdge = botEdges[ iS ]._edge;
+ sides[ iS ]._face = botF;
+ sides[ iS ]._leftSide = & sides[ botEdges[ iS ]._iR ];
+ sides[ iS ]._rightSide = & sides[ botEdges[ iS ]._iL ];
+ sides[ iS ]._faces = & facesOfSide[ iS ];
+ sides[ iS ]._faces->Clear();
+ }
+
+ bool isOK = true; // ok for a current botF
+ bool isAdvanced = true;
+ int nbFoundSideFaces = 0;
+ for ( int iLoop = 0; isOK && isAdvanced; ++iLoop )
+ {
+ isAdvanced = false;
+ for ( size_t iS = 0; iS < sides.size() && isOK; ++iS )
+ {
+ PrismSide& side = sides[ iS ];
+ if ( side._face.IsNull() )
+ continue;
+ if ( side._topEdge.IsNull() )
+ {
+ // find vertical EDGEs --- EGDEs shared with neighbor side FACEs
+ for ( int is2nd = 0; is2nd < 2 && isOK; ++is2nd ) // 2 adjacent neighbors
+ {
+ int di = is2nd ? 1 : -1;
+ const PrismSide* adjSide = is2nd ? side._rightSide : side._leftSide;
+ for ( size_t i = 1; i < side._edges->size(); ++i )
+ {
+ int iE = SMESH_MesherHelper::WrapIndex( i*di + side._iBotEdge, side._edges->size());
+ if ( side._isCheckedEdge[ iE ] ) continue;
+ const TopoDS_Edge& vertE = side.Edge( iE );
+ const TopoDS_Shape& neighborF = getAnotherFace( side._face, vertE, facesOfEdge );
+ bool isEdgeShared = adjSide->_faces->Contains( neighborF );
+ if ( isEdgeShared )
+ {
+ isAdvanced = true;
+ side._isCheckedEdge[ iE ] = true;
+ side._nbCheckedEdges++;
+ int nbNotCheckedE = side._edges->size() - side._nbCheckedEdges;
+ if ( nbNotCheckedE == 1 )
+ break;
+ }
+ else
+ {
+ if ( i == 1 && iLoop == 0 ) isOK = false;
+ break;
+ }
+ }
+ }
+ // find a top EDGE
+ int nbNotCheckedE = side._edges->size() - side._nbCheckedEdges;
+ if ( nbNotCheckedE == 1 )
+ {
+ vector<bool>::iterator ii = std::find( side._isCheckedEdge.begin(),
+ side._isCheckedEdge.end(), false );
+ if ( ii != side._isCheckedEdge.end() )
+ {
+ size_t iE = std::distance( side._isCheckedEdge.begin(), ii );
+ side._topEdge = side.Edge( iE );
+ }
+ }
+ isOK = ( nbNotCheckedE >= 1 );
+ }
+ else //if ( !side._topEdge.IsNull() )
+ {
+ // get a next face of a side
+ const TopoDS_Shape& f = getAnotherFace( side._face, side._topEdge, facesOfEdge );
+ side._faces->Add( f );
+ bool stop = false;
+ if ( f.IsSame( side._face ) || // _topEdge is a seam
+ SMESH_MesherHelper::Count( f, TopAbs_WIRE, false ) != 1 )
+ {
+ stop = true;
+ }
+ else if ( side._leftSide != & side ) // not closed side face
+ {
+ if ( side._leftSide->_faces->Contains( f ))
+ {
+ stop = true;
+ side._leftSide->_face.Nullify();
+ side._leftSide->_topEdge.Nullify();
+ }
+ if ( side._rightSide->_faces->Contains( f ))
+ {
+ stop = true;
+ side._rightSide->_face.Nullify();
+ side._rightSide->_topEdge.Nullify();
+ }
+ }
+ if ( stop )
+ {
+ side._face.Nullify();
+ side._topEdge.Nullify();
+ continue;
+ }
+ side._face = TopoDS::Face( f );
+ int faceID = allFaces.FindIndex( side._face );
+ side._edges = & faceEdgesVec[ faceID ];
+ if ( side._edges->empty() )
+ if ( !getEdges( side._face, * side._edges, /*noHoles=*/true ))
+ break;
+ const int nbE = side._edges->size();
+ if ( nbE >= 4 )
+ {
+ isAdvanced = true;
+ ++nbFoundSideFaces;
+ side._iBotEdge = side.FindEdge( side._topEdge );
+ side._isCheckedEdge.clear();
+ side._isCheckedEdge.resize( nbE, false );
+ side._isCheckedEdge[ side._iBotEdge ] = true;
+ side._nbCheckedEdges = 1; // bottom EDGE is known
+ }
+ side._topEdge.Nullify();
+ isOK = ( !side._edges->empty() || side._faces->Extent() > 1 );
+
+ } //if ( !side._topEdge.IsNull() )
+
+ } // loop on prism sides
+
+ if ( nbFoundSideFaces > allFaces.Extent() )
+ {
+ isOK = false;
+ }
+ if ( iLoop > allFaces.Extent() * 10 )
+ {
+ isOK = false;
+#ifdef _DEBUG_
+ cerr << "BUG: infinite loop in StdMeshers_Prism_3D::IsApplicable()" << endl;
+#endif
+ }
+ } // while isAdvanced
+
+ if ( isOK && sides[0]._faces->Extent() > 1 )
+ {
+ const int nbFaces = sides[0]._faces->Extent();
+ if ( botEdges.size() == 1 ) // cylinder
+ {
+ prismDetected = ( nbFaces == allFaces.Extent()-1 );
+ }
+ else
+ {
+ const TopoDS_Shape& topFace = sides[0]._faces->FindKey( nbFaces );
+ size_t iS;
+ for ( iS = 1; iS < sides.size(); ++iS )
+ if ( !sides[ iS ]._faces->Contains( topFace ))
+ break;
+ prismDetected = ( iS == sides.size() );
+ }
+ }
+ } // loop on allFaces
+
+ if ( !prismDetected && toCheckAll ) return false;
+ if ( prismDetected && !toCheckAll ) return true;
+
+ } // loop on solids
+
+ return toCheckAll;
+}
+
namespace Prism_3D
{
//================================================================================
Prism_3D::TQuadList::const_iterator quad = thePrism.myWallQuads[ iE ].begin();
for ( ; quad != thePrism.myWallQuads[ iE ].end(); ++quad )
{
- const TopoDS_Edge& quadBot = (*quad)->side[ QUAD_BOTTOM_SIDE ]->Edge( 0 );
+ const TopoDS_Edge& quadBot = (*quad)->side[ QUAD_BOTTOM_SIDE ].grid->Edge( 0 );
if ( !myHelper->LoadNodeColumns( faceColumns, (*quad)->face, quadBot, meshDS ))
return error(COMPERR_BAD_INPUT_MESH, TCom("Can't find regular quadrangle mesh ")
<< "on a side face #" << MeshDS()->ShapeToIndex( (*quad)->face ));
Prism_3D::TQuadList::const_iterator quad = thePrism.myWallQuads[ iE ].begin();
for ( ; quad != thePrism.myWallQuads[ iE ].end(); ++quad )
{
- const TopoDS_Edge& quadBot = (*quad)->side[ QUAD_BOTTOM_SIDE ]->Edge( 0 );
+ const TopoDS_Edge& quadBot = (*quad)->side[ QUAD_BOTTOM_SIDE ].grid->Edge( 0 );
if ( !myHelper->LoadNodeColumns( faceColumns, (*quad)->face, quadBot, meshDS ))
return error(COMPERR_BAD_INPUT_MESH, TCom("Can't find regular quadrangle mesh ")
<< "on a side face #" << MeshDS()->ShapeToIndex( (*quad)->face ));
const int Z = isTop ? sideFace->ColumnHeight() - 1 : 0;
map<double, const SMDS_MeshNode* > u2nodes;
sideFace->GetNodesAtZ( Z, u2nodes );
+ if ( u2nodes.empty() )
+ return;
SMESH_MesherHelper helper( *sideFace->GetMesh() );
helper.SetSubShape( horFace );
map< double, gp_XY >::const_iterator i1 = myUVmap.upper_bound( U );
if ( i1 == myUVmap.end() )
- return myUVmap.rbegin()->second;
+ return myUVmap.empty() ? gp_XY(0,0) : myUVmap.rbegin()->second;
if ( i1 == myUVmap.begin() )
return (*i1).second;
