-# Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
## @{
## @defgroup l3_algos_basic Basic meshing algorithms
## @defgroup l3_algos_proj Projection Algorithms
-## @defgroup l3_algos_radialp Radial Prism
## @defgroup l3_algos_segmarv Segments around Vertex
## @defgroup l3_algos_3dextr 3D extrusion meshing algorithm
## @defgroup l2_modif_trsf Transforming meshes (Translation, Rotation, Symmetry, Sewing, Merging)
## @defgroup l2_modif_movenode Moving nodes
## @defgroup l2_modif_throughp Mesh through point
-## @defgroup l2_modif_invdiag Diagonal inversion of elements
## @defgroup l2_modif_unitetri Uniting triangles
-## @defgroup l2_modif_changori Changing orientation of elements
## @defgroup l2_modif_cutquadr Cutting elements
+## @defgroup l2_modif_changori Changing orientation of elements
## @defgroup l2_modif_smooth Smoothing
## @defgroup l2_modif_extrurev Extrusion and Revolution
## @defgroup l2_modif_patterns Pattern mapping
elif status == HYP_BAD_SUBSHAPE :
reason = "the shape is neither the main one, nor its sub-shape, nor a valid group"
elif status == HYP_BAD_GEOMETRY:
- reason = "geometry mismatches the expectation of the algorithm"
+ reason = "the algorithm is not applicable to this geometry"
elif status == HYP_HIDDEN_ALGO:
reason = "it is hidden by an algorithm of an upper dimension, which generates elements of all dimensions"
elif status == HYP_HIDING_ALGO:
if mesh:
meshName = GetName( mesh )
if meshName and meshName != NO_NAME:
- where = '"%s" in "%s"' % ( geomName, meshName )
+ where = '"%s" shape in "%s" mesh ' % ( geomName, meshName )
if status < HYP_UNKNOWN_FATAL and where:
print '"%s" was assigned to %s but %s' %( hypName, where, reason )
elif where:
doLcc = False
created = False
-## This class allows to create, load or manipulate meshes
-# It has a set of methods to create load or copy meshes, to combine several meshes.
-# It also has methods to get infos on meshes.
+## This class allows to create, load or manipulate meshes.
+# It has a set of methods to create, load or copy meshes, to combine several meshes, etc.
+# It also has methods to get infos and measure meshes.
class smeshBuilder(object, SMESH._objref_SMESH_Gen):
# MirrorType enumeration
# @param allGroups forces creation of groups corresponding to every input mesh
# @param name name of a new mesh
# @return an instance of Mesh class
+ # @ingroup l2_compounds
def Concatenate( self, meshes, uniteIdenticalGroups,
mergeNodesAndElements = False, mergeTolerance = 1e-5, allGroups = False,
name = ""):
## Creates a numerical functor by its type
# @param theCriterion functor type - an item of SMESH.FunctorType enumeration.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @return SMESH_NumericalFunctor
# @ingroup l1_controls
def GetFunctor(self,theCriterion):
# import salome
# salome.salome_init()
# from salome.smesh import smeshBuilder
-# smesh = smeshBuilder.New(theStudy)
+# smesh = smeshBuilder.New(salome.myStudy)
# \endcode
# @param study SALOME study, generally obtained by salome.myStudy.
# @param instance CORBA proxy of SMESH Engine. If None, the default Engine is used.
import salome
salome.salome_init()
from salome.smesh import smeshBuilder
- smesh = smeshBuilder.New(theStudy)
+ smesh = smeshBuilder.New(salome.myStudy)
Parameters:
study SALOME study, generally obtained by salome.myStudy.
# Treat compute errors
computeErrors = self.smeshpyD.GetComputeErrors( self.mesh, geom )
+ shapeText = ""
for err in computeErrors:
- shapeText = " on %s" % self.GetSubShapeName( err.subShapeID )
+ if self.mesh.HasShapeToMesh():
+ shapeText = " on %s" % self.GetSubShapeName( err.subShapeID )
errText = ""
stdErrors = ["OK", #COMPERR_OK
"Invalid input mesh", #COMPERR_BAD_INPUT_MESH
return groups
## Return sub-mesh objects list in meshing order
- # @return list of list of submesh objects
+ # @return list of lists of sub-meshes
# @ingroup l2_construct
def GetMeshOrder(self):
return self.mesh.GetMeshOrder()
## Set order in which concurrent sub-meshes sould be meshed
- # @param list of sub-meshes
+ # @param submeshes list of lists of sub-meshes
# @ingroup l2_construct
def SetMeshOrder(self, submeshes):
return self.mesh.SetMeshOrder(submeshes)
if self.mesh.HasShapeToMesh():
hyp_type = hyp.GetName()
lib_name = hyp.GetLibName()
- checkAll = ( not geom.IsSame( self.mesh.GetShapeToMesh() ))
- if checkAll and geom:
- checkAll = geom.GetType() == 37
+ # checkAll = ( not geom.IsSame( self.mesh.GetShapeToMesh() ))
+ # if checkAll and geom:
+ # checkAll = geom.GetType() == 37
+ checkAll = False
isApplicable = self.smeshpyD.IsApplicable(hyp_type, lib_name, geom, checkAll)
if isApplicable:
AssureGeomPublished( self, geom, "shape for %s" % hyp.GetName())
# @param groupName the name of the mesh group
# @param elementType the type of elements in the group; either of
# (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME).
- # @param elemIDs the list of ids
+ # @param elemIDs either the list of ids, group, sub-mesh, or filter
# @return SMESH_Group
# @ingroup l2_grps_create
def MakeGroupByIds(self, groupName, elementType, elemIDs):
##
# Create a standalone group of entities basing on nodes of other groups.
- # \param groups - list of groups, sub-meshes or filters, of any type.
+ # \param groups - list of reference groups, sub-meshes or filters, of any type.
# \param elemType - a type of elements to include to the new group; either of
# (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME).
# \param name - a name of the new group.
# - SMESH.AT_LEAST_ONE - include if one or more node is common,
# - SMEHS.MAJORITY - include if half of nodes or more are common.
# \param underlyingOnly - if \c True (default), an element is included to the
- # new group provided that it is based on nodes of one element of \a groups.
+ # new group provided that it is based on nodes of an element of \a groups;
+ # in this case the reference \a groups are supposed to be of higher dimension
+ # than \a elemType, which can be useful for example to get all faces lying on
+ # volumes of the reference \a groups.
# @return an instance of SMESH_Group
# @ingroup l2_grps_operon
def CreateDimGroup(self, groups, elemType, name,
## Convert group on geom into standalone group
- # @ingroup l2_grps_delete
+ # @ingroup l2_grps_edit
def ConvertToStandalone(self, group):
return self.mesh.ConvertToStandalone(group)
# @return an integer value
# @ingroup l1_meshinfo
def NbPolygons(self, elementOrder = SMESH.ORDER_ANY):
- return self.mesh.NbPolygons(elementOrder)
+ return self.mesh.NbPolygonsOfOrder(elementOrder)
## Returns the number of volumes in the mesh
# @return an integer value
# @return the list of integer values
# @ingroup l1_meshinfo
def GetSubMeshElementsId(self, Shape):
- if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
- ShapeID = Shape.GetSubShapeIndices()[0]
+ if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object):
+ ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
return self.mesh.GetSubMeshElementsId(ShapeID)
# @return the list of integer values
# @ingroup l1_meshinfo
def GetSubMeshNodesId(self, Shape, all):
- if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
+ if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object):
ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
# @return element type
# @ingroup l1_meshinfo
def GetSubMeshElementType(self, Shape):
- if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
- ShapeID = Shape.GetSubShapeIndices()[0]
+ if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object):
+ ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
return self.mesh.GetSubMeshElementType(ShapeID)
# @ingroup l2_modif_add
def SetNodeOnVertex(self, NodeID, Vertex):
if ( isinstance( Vertex, geomBuilder.GEOM._objref_GEOM_Object)):
- VertexID = Vertex.GetSubShapeIndices()[0]
+ VertexID = self.geompyD.GetSubShapeID( self.geom, Vertex )
else:
VertexID = Vertex
try:
# @ingroup l2_modif_add
def SetNodeOnEdge(self, NodeID, Edge, paramOnEdge):
if ( isinstance( Edge, geomBuilder.GEOM._objref_GEOM_Object)):
- EdgeID = Edge.GetSubShapeIndices()[0]
+ EdgeID = self.geompyD.GetSubShapeID( self.geom, Edge )
else:
EdgeID = Edge
try:
# @ingroup l2_modif_add
def SetNodeOnFace(self, NodeID, Face, u, v):
if ( isinstance( Face, geomBuilder.GEOM._objref_GEOM_Object)):
- FaceID = Face.GetSubShapeIndices()[0]
+ FaceID = self.geompyD.GetSubShapeID( self.geom, Face )
else:
FaceID = Face
try:
# @ingroup l2_modif_add
def SetNodeInVolume(self, NodeID, Solid):
if ( isinstance( Solid, geomBuilder.GEOM._objref_GEOM_Object)):
- SolidID = Solid.GetSubShapeIndices()[0]
+ SolidID = self.geompyD.GetSubShapeID( self.geom, Solid )
else:
SolidID = Solid
try:
# @ingroup l2_modif_add
def SetMeshElementOnShape(self, ElementID, Shape):
if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
- ShapeID = Shape.GetSubShapeIndices()[0]
+ ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
try:
# @param NodeID1 the ID of the first node
# @param NodeID2 the ID of the second node
# @return false if proper faces were not found
- # @ingroup l2_modif_invdiag
+ # @ingroup l2_modif_cutquadr
def InverseDiag(self, NodeID1, NodeID2):
return self.editor.InverseDiag(NodeID1, NodeID2)
## Fuses the neighbouring triangles into quadrangles.
# @param IDsOfElements The triangles to be fused.
# @param theCriterion a numerical functor, in terms of enum SMESH.FunctorType, used to
- # choose a neighbour to fuse with.
+ # applied to possible quadrangles to choose a neighbour to fuse with.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @param MaxAngle is the maximum angle between element normals at which the fusion
# is still performed; theMaxAngle is mesured in radians.
# Also it could be a name of variable which defines angle in degrees.
## Fuses the neighbouring triangles of the object into quadrangles
# @param theObject is mesh, submesh or group
- # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
- # choose a neighbour to fuse with.
+ # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType,
+ # applied to possible quadrangles to choose a neighbour to fuse with.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @param MaxAngle a max angle between element normals at which the fusion
# is still performed; theMaxAngle is mesured in radians.
# @return TRUE in case of success, FALSE otherwise.
## Splits quadrangles into triangles.
# @param IDsOfElements the faces to be splitted.
- # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
+ # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
# choose a diagonal for splitting. If @a theCriterion is None, which is a default
# value, then quadrangles will be split by the smallest diagonal.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_cutquadr
def QuadToTri (self, IDsOfElements, theCriterion = None):
# choose a diagonal for splitting. If @a theCriterion is None, which is a default
# value, then quadrangles will be split by the smallest diagonal.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_cutquadr
def QuadToTriObject (self, theObject, theCriterion = None):
# @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
# choose a diagonal for splitting.
# Type SMESH.FunctorType._items in the Python Console to see all items.
- # Note that not all items corresponds to numerical functors.
+ # Note that not all items correspond to numerical functors.
# @return 1 if 1-3 diagonal is better, 2 if 2-4
# diagonal is better, 0 if error occurs.
# @ingroup l2_modif_cutquadr
## Creates 2D mesh as skin on boundary faces of a 3D mesh
# @return TRUE if operation has been completed successfully, FALSE otherwise
# @ingroup l2_modif_edit
- def Make2DMeshFrom3D(self):
- return self.editor. Make2DMeshFrom3D()
+ def Make2DMeshFrom3D(self):
+ return self.editor.Make2DMeshFrom3D()
## Creates missing boundary elements
# @param elements - elements whose boundary is to be checked:
## Generates new elements by extrusion of the elements with given ids
- # @param IDsOfElements the list of elements ids for extrusion
+ # @param IDsOfElements the list of ids of elements or nodes for extrusion
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
return self.ExtrusionSweepObjects(n,e,f, StepVector, NbOfSteps, MakeGroups)
## Generates new elements by extrusion along the normal to a discretized surface or wire
- # @param Elements elements to extrude - a list including ids, groups, sub-meshes or a mesh
- # Only faces can be extruded so far. Sub-mesh should be a sub-mesh on geom faces.
+ # @param Elements elements to extrude - a list including ids, groups, sub-meshes or a mesh.
+ # Only faces can be extruded so far. A sub-mesh should be a sub-mesh on geom faces.
# @param StepSize length of one extrusion step (the total extrusion
# length will be \a NbOfSteps * \a StepSize ).
# @param NbOfSteps number of extrusion steps.
return self.editor.ExtrusionByNormal(Elements, StepSize, NbOfSteps,
ByAverageNormal, UseInputElemsOnly, MakeGroups, Dim)
- ## Generates new elements by extrusion of the elements which belong to the object
- # @param theObject the object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ ## Generates new elements by extrusion of the elements or nodes which belong to the object
+ # @param theObject the object whose elements or nodes should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
# @param NbOfSteps the number of steps
# @param MakeGroups forces the generation of new groups from existing ones
- # @param IsNodes is True if elements to extrude are nodes
+ # @param IsNodes is True if elements to extrude are nodes
# @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
# @ingroup l2_modif_extrurev
def ExtrusionSweepObject(self, theObject, StepVector, NbOfSteps, MakeGroups=False, IsNodes=False):
else : e,f, = theObject,theObject
return self.ExtrusionSweepObjects(n,e,f, StepVector, NbOfSteps, MakeGroups)
- ## Generates new elements by extrusion of the elements which belong to the object
- # @param theObject object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ ## Generates new elements by extrusion of edges which belong to the object
+ # @param theObject object whose 1D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
def ExtrusionSweepObject1D(self, theObject, StepVector, NbOfSteps, MakeGroups=False):
return self.ExtrusionSweepObjects([],theObject,[], StepVector, NbOfSteps, MakeGroups)
- ## Generates new elements by extrusion of the elements which belong to the object
- # @param theObject object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ ## Generates new elements by extrusion of faces which belong to the object
+ # @param theObject object whose 2D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
if isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object):
RefPoint = self.smeshpyD.GetPointStruct(RefPoint)
if isinstance( RefPoint, list ):
+ if not RefPoint: RefPoint = [0,0,0]
RefPoint = SMESH.PointStruct( *RefPoint )
if isinstance( PathMesh, Mesh ):
PathMesh = PathMesh.GetMesh()
## Generates new elements by extrusion of the given elements
# The path of extrusion must be a meshed edge.
- # @param Base mesh or group, or submesh, or list of ids of elements for extrusion
+ # @param Base mesh or group, or sub-mesh, or list of ids of elements for extrusion
# @param Path - 1D mesh or 1D sub-mesh, along which proceeds the extrusion
# @param NodeStart the start node from Path. Defines the direction of extrusion
# @param HasAngles allows the shape to be rotated around the path
# only SMESH::Extrusion_Error otherwise
# @ingroup l2_modif_extrurev
def ExtrusionAlongPathX(self, Base, Path, NodeStart,
- HasAngles, Angles, LinearVariation,
- HasRefPoint, RefPoint, MakeGroups, ElemType):
+ HasAngles=False, Angles=[], LinearVariation=False,
+ HasRefPoint=False, RefPoint=[0,0,0], MakeGroups=False,
+ ElemType=SMESH.FACE):
n,e,f = [],[],[]
if ElemType == SMESH.NODE: n = Base
if ElemType == SMESH.EDGE: e = Base
# only SMESH::Extrusion_Error otherwise
# @ingroup l2_modif_extrurev
def ExtrusionAlongPath(self, IDsOfElements, PathMesh, PathShape, NodeStart,
- HasAngles, Angles, HasRefPoint, RefPoint,
+ HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[],
MakeGroups=False, LinearVariation=False):
n,e,f = [],IDsOfElements,IDsOfElements
gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape,
## Generates new elements by extrusion of the elements which belong to the object
# The path of extrusion must be a meshed edge.
- # @param theObject the object which elements should be processed.
+ # @param theObject the object whose elements should be processed.
# It can be a mesh, a sub-mesh or a group.
# @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds
# @param PathShape shape(edge) defines the sub-mesh for the path
# only SMESH::Extrusion_Error otherwise
# @ingroup l2_modif_extrurev
def ExtrusionAlongPathObject(self, theObject, PathMesh, PathShape, NodeStart,
- HasAngles, Angles, HasRefPoint, RefPoint,
+ HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[],
MakeGroups=False, LinearVariation=False):
n,e,f = [],theObject,theObject
gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart,
if MakeGroups: return gr,er
return er
- ## Generates new elements by extrusion of the elements which belong to the object
+ ## Generates new elements by extrusion of mesh segments which belong to the object
# The path of extrusion must be a meshed edge.
- # @param theObject the object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ # @param theObject the object whose 1D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds
# @param PathShape shape(edge) defines the sub-mesh for the path
# @param NodeStart the first or the last node on the edge. Defines the direction of extrusion
# only SMESH::Extrusion_Error otherwise
# @ingroup l2_modif_extrurev
def ExtrusionAlongPathObject1D(self, theObject, PathMesh, PathShape, NodeStart,
- HasAngles, Angles, HasRefPoint, RefPoint,
+ HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[],
MakeGroups=False, LinearVariation=False):
n,e,f = [],theObject,[]
gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart,
if MakeGroups: return gr,er
return er
- ## Generates new elements by extrusion of the elements which belong to the object
+ ## Generates new elements by extrusion of faces which belong to the object
# The path of extrusion must be a meshed edge.
- # @param theObject the object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ # @param theObject the object whose 2D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds
# @param PathShape shape(edge) defines the sub-mesh for the path
# @param NodeStart the first or the last node on the edge. Defines the direction of extrusion
# only SMESH::Extrusion_Error otherwise
# @ingroup l2_modif_extrurev
def ExtrusionAlongPathObject2D(self, theObject, PathMesh, PathShape, NodeStart,
- HasAngles, Angles, HasRefPoint, RefPoint,
+ HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[],
MakeGroups=False, LinearVariation=False):
n,e,f = [],[],theObject
gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart,
# then the first node in the group is kept.
# @ingroup l2_modif_trsf
def MergeNodes (self, GroupsOfNodes, NodesToKeep=[]):
- unRegister = genObjUnRegister()
- if NodesToKeep:
- if isinstance( NodesToKeep, list ) and isinstance( NodesToKeep[0], int ):
- NodesToKeep = self.GetIDSource( NodesToKeep, SMESH.NODE )
- if not isinstance( NodesToKeep, list ):
- NodesToKeep = [ NodesToKeep ]
+ # NodesToKeep are converted to SMESH_IDSource in meshEditor.MergeNodes()
self.editor.MergeNodes(GroupsOfNodes,NodesToKeep)
## Finds the elements built on the same nodes.
def MergeEqualElements(self):
self.editor.MergeEqualElements()
+ ## Returns groups of FreeBorder's coincident within the given tolerance.
+ # @param tolerance the tolerance. If the tolerance <= 0.0 then one tenth of an average
+ # size of elements adjacent to free borders being compared is used.
+ # @return SMESH.CoincidentFreeBorders structure
+ # @ingroup l2_modif_trsf
+ def FindCoincidentFreeBorders (self, tolerance=0.):
+ return self.editor.FindCoincidentFreeBorders( tolerance )
+
+ ## Sew FreeBorder's of each group
+ # @param freeBorders either a SMESH.CoincidentFreeBorders structure or a list of lists
+ # where each enclosed list contains node IDs of a group of coincident free
+ # borders such that each consequent triple of IDs within a group describes
+ # a free border in a usual way: n1, n2, nLast - i.e. 1st node, 2nd node and
+ # last node of a border.
+ # For example [[1, 2, 10, 20, 21, 40], [11, 12, 15, 55, 54, 41]] describes two
+ # groups of coincident free borders, each group including two borders.
+ # @param createPolygons if @c True faces adjacent to free borders are converted to
+ # polygons if a node of opposite border falls on a face edge, else such
+ # faces are split into several ones.
+ # @param createPolyhedra if @c True volumes adjacent to free borders are converted to
+ # polyhedra if a node of opposite border falls on a volume edge, else such
+ # volumes, if any, remain intact and the mesh becomes non-conformal.
+ # @return a number of successfully sewed groups
+ # @ingroup l2_modif_trsf
+ def SewCoincidentFreeBorders (self, freeBorders, createPolygons=False, createPolyhedra=False):
+ if freeBorders and isinstance( freeBorders, list ):
+ # construct SMESH.CoincidentFreeBorders
+ if isinstance( freeBorders[0], int ):
+ freeBorders = [freeBorders]
+ borders = []
+ coincidentGroups = []
+ for nodeList in freeBorders:
+ if not nodeList or len( nodeList ) % 3:
+ raise ValueError, "Wrong number of nodes in this group: %s" % nodeList
+ group = []
+ while nodeList:
+ group.append ( SMESH.FreeBorderPart( len(borders), 0, 1, 2 ))
+ borders.append( SMESH.FreeBorder( nodeList[:3] ))
+ nodeList = nodeList[3:]
+ pass
+ coincidentGroups.append( group )
+ pass
+ freeBorders = SMESH.CoincidentFreeBorders( borders, coincidentGroups )
+
+ return self.editor.SewCoincidentFreeBorders( freeBorders, createPolygons, createPolyhedra )
+
## Sews free borders
# @return SMESH::Sew_Error
# @ingroup l2_modif_trsf
def ClearLastCreated(self):
self.editor.ClearLastCreated()
- ## Creates Duplicates given elements, i.e. creates new elements based on the
+ ## Creates duplicates of given elements, i.e. creates new elements based on the
# same nodes as the given ones.
# @param theElements - container of elements to duplicate. It can be a Mesh,
# sub-mesh, group, filter or a list of element IDs. If \a theElements is
## Returns value of a functor for a given element
# @param funcType an item of SMESH.FunctorType enum
+ # Type "SMESH.FunctorType._items" in the Python Console to see all items.
# @param elemId element or node ID
# @param isElem @a elemId is ID of element or node
# @return the functor value or zero in case of invalid arguments
fun = self._getFunctor( funType )
if fun:
if meshPart:
+ if hasattr( meshPart, "SetMesh" ):
+ meshPart.SetMesh( self.mesh ) # set mesh to filter
hist = fun.GetLocalHistogram( 1, False, meshPart )
else:
hist = fun.GetHistogram( 1, False )
pass # end of Mesh class
-## class used to add to SMESH_MeshEditor methods removed from its CORBA API
+
+## class used to compensate change of CORBA API of SMESH_Mesh for backward compatibility
+# with old dump scripts which call SMESH_Mesh directly and not via smeshBuilder.Mesh
+#
+class meshProxy(SMESH._objref_SMESH_Mesh):
+ def __init__(self):
+ SMESH._objref_SMESH_Mesh.__init__(self)
+ def __deepcopy__(self, memo=None):
+ new = self.__class__()
+ return new
+ def CreateDimGroup(self,*args): # 2 args added: nbCommonNodes, underlyingOnly
+ if len( args ) == 3:
+ args += SMESH.ALL_NODES, True
+ return SMESH._objref_SMESH_Mesh.CreateDimGroup( self, *args )
+ pass
+omniORB.registerObjref(SMESH._objref_SMESH_Mesh._NP_RepositoryId, meshProxy)
+
+## class used to compensate change of CORBA API of SMESH_MeshEditor for backward compatibility
+# with old dump scripts which call SMESH_MeshEditor directly and not via smeshBuilder.Mesh
#
class meshEditor(SMESH._objref_SMESH_MeshEditor):
def __init__(self):
if hasattr( self.mesh, name ):
return getattr( self.mesh, name )
if name == "ExtrusionAlongPathObjX":
- return getattr( self.mesh, "ExtrusionAlongPathX" )
- print name, "meshEditor: attribute '%s' NOT FOUND" % name
+ return getattr( self.mesh, "ExtrusionAlongPathX" ) # other method name
+ print "meshEditor: attribute '%s' NOT FOUND" % name
return None
def __deepcopy__(self, memo=None):
new = self.__class__()
return new
+ def FindCoincidentNodes(self,*args): # a 2nd arg added (SeparateCornerAndMediumNodes)
+ if len( args ) == 1: args += False,
+ return SMESH._objref_SMESH_MeshEditor.FindCoincidentNodes( self, *args )
+ def FindCoincidentNodesOnPart(self,*args): # a 3d arg added (SeparateCornerAndMediumNodes)
+ if len( args ) == 2: args += False,
+ return SMESH._objref_SMESH_MeshEditor.FindCoincidentNodesOnPart( self, *args )
+ def MergeNodes(self,*args): # a 2nd arg added (NodesToKeep)
+ if len( args ) == 1:
+ return SMESH._objref_SMESH_MeshEditor.MergeNodes( self, args[0], [] )
+ NodesToKeep = args[1]
+ unRegister = genObjUnRegister()
+ if NodesToKeep:
+ if isinstance( NodesToKeep, list ) and isinstance( NodesToKeep[0], int ):
+ NodesToKeep = self.MakeIDSource( NodesToKeep, SMESH.NODE )
+ if not isinstance( NodesToKeep, list ):
+ NodesToKeep = [ NodesToKeep ]
+ return SMESH._objref_SMESH_MeshEditor.MergeNodes( self, args[0], NodesToKeep )
pass
omniORB.registerObjref(SMESH._objref_SMESH_MeshEditor._NP_RepositoryId, meshEditor)
#
class Pattern(SMESH._objref_SMESH_Pattern):
+ def LoadFromFile(self, patternTextOrFile ):
+ text = patternTextOrFile
+ if os.path.exists( text ):
+ text = open( patternTextOrFile ).read()
+ pass
+ return SMESH._objref_SMESH_Pattern.LoadFromFile( self, text )
+
def ApplyToMeshFaces(self, theMesh, theFacesIDs, theNodeIndexOnKeyPoint1, theReverse):
decrFun = lambda i: i-1
theNodeIndexOnKeyPoint1,Parameters,hasVars = ParseParameters(theNodeIndexOnKeyPoint1, decrFun)
theMesh.SetParameters(Parameters)
return SMESH._objref_SMESH_Pattern.ApplyToHexahedrons( self, theMesh, theVolumesIDs, theNode000Index, theNode001Index )
+ def MakeMesh(self, mesh, CreatePolygons=False, CreatePolyhedra=False):
+ if isinstance( mesh, Mesh ):
+ mesh = mesh.GetMesh()
+ return SMESH._objref_SMESH_Pattern.MakeMesh( self, mesh, CreatePolygons, CreatePolyhedra )
+
# Registering the new proxy for Pattern
omniORB.registerObjref(SMESH._objref_SMESH_Pattern._NP_RepositoryId, Pattern)
