-# Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
## @defgroup l2_modif_invdiag Diagonal inversion of elements
## @defgroup l2_modif_unitetri Uniting triangles
## @defgroup l2_modif_changori Changing orientation of elements
-## @defgroup l2_modif_cutquadr Cutting quadrangles
+## @defgroup l2_modif_cutquadr Cutting elements
## @defgroup l2_modif_smooth Smoothing
## @defgroup l2_modif_extrurev Extrusion and Revolution
## @defgroup l2_modif_patterns Pattern mapping
import SALOMEDS
import os
+class MeshMeta(type):
+ def __instancecheck__(cls, inst):
+ """Implement isinstance(inst, cls)."""
+ return any(cls.__subclasscheck__(c)
+ for c in {type(inst), inst.__class__})
+
+ def __subclasscheck__(cls, sub):
+ """Implement issubclass(sub, cls)."""
+ return type.__subclasscheck__(cls, sub) or (cls.__name__ == sub.__name__ and cls.__module__ == sub.__module__)
+
## @addtogroup l1_auxiliary
## @{
raise RuntimeError, "Null or invalid object"
## Prints error message if a hypothesis was not assigned.
-def TreatHypoStatus(status, hypName, geomName, isAlgo):
+def TreatHypoStatus(status, hypName, geomName, isAlgo, mesh):
if isAlgo:
hypType = "algorithm"
else:
hypType = "hypothesis"
pass
+ reason = ""
+ if hasattr( status, "__getitem__" ):
+ status,reason = status[0],status[1]
if status == HYP_UNKNOWN_FATAL :
reason = "for unknown reason"
elif status == HYP_INCOMPATIBLE :
elif status == HYP_HIDING_ALGO:
reason = "it hides algorithms of lower dimensions by generating elements of all dimensions"
elif status == HYP_NEED_SHAPE:
- reason = "Algorithm can't work without shape"
+ reason = "algorithm can't work without shape"
+ elif status == HYP_INCOMPAT_HYPS:
+ pass
else:
return
- hypName = '"' + hypName + '"'
- geomName= '"' + geomName+ '"'
- if status < HYP_UNKNOWN_FATAL and not geomName =='""':
- print hypName, "was assigned to", geomName,"but", reason
- elif not geomName == '""':
- print hypName, "was not assigned to",geomName,":", reason
+ where = geomName
+ if where:
+ where = '"%s"' % geomName
+ if mesh:
+ meshName = GetName( mesh )
+ if meshName and meshName != NO_NAME:
+ where = '"%s" in "%s"' % ( geomName, meshName )
+ if status < HYP_UNKNOWN_FATAL and where:
+ print '"%s" was assigned to %s but %s' %( hypName, where, reason )
+ elif where:
+ print '"%s" was not assigned to %s : %s' %( hypName, where, reason )
else:
- print hypName, "was not assigned:", reason
+ print '"%s" was not assigned : %s' %( hypName, reason )
pass
## Private method. Add geom (sub-shape of the main shape) into the study if not yet there
[TopAbs_IN, TopAbs_OUT, TopAbs_ON, TopAbs_UNKNOWN] = range(4)
# Methods of splitting a hexahedron into tetrahedra
- Hex_5Tet, Hex_6Tet, Hex_24Tet = 1, 2, 3
+ Hex_5Tet, Hex_6Tet, Hex_24Tet, Hex_2Prisms, Hex_4Prisms = 1, 2, 3, 1, 2
def __new__(cls):
global engine
def init_smesh(self,theStudy,geompyD = None):
#print "init_smesh"
self.SetCurrentStudy(theStudy,geompyD)
-
- ## Creates an empty Mesh. This mesh can have an underlying geometry.
- # @param obj the Geometrical object on which the mesh is built. If not defined,
- # the mesh will have no underlying geometry.
+ if theStudy:
+ global notebook
+ notebook.myStudy = theStudy
+
+ ## Creates a mesh. This can be either an empty mesh, possibly having an underlying geometry,
+ # or a mesh wrapping a CORBA mesh given as a parameter.
+ # @param obj either (1) a CORBA mesh (SMESH._objref_SMESH_Mesh) got e.g. by calling
+ # salome.myStudy.FindObjectID("0:1:2:3").GetObject() or
+ # (2) a Geometrical object for meshing or
+ # (3) none.
# @param name the name for the new mesh.
# @return an instance of Mesh class.
# @ingroup l2_construct
# @return SMESH.AxisStruct
# @ingroup l1_auxiliary
def GetAxisStruct(self,theObj):
+ import GEOM
edges = self.geompyD.SubShapeAll( theObj, geomBuilder.geomBuilder.ShapeType["EDGE"] )
+ axis = None
if len(edges) > 1:
vertex1, vertex2 = self.geompyD.SubShapeAll( edges[0], geomBuilder.geomBuilder.ShapeType["VERTEX"] )
vertex3, vertex4 = self.geompyD.SubShapeAll( edges[1], geomBuilder.geomBuilder.ShapeType["VERTEX"] )
v2 = [vertex4[0]-vertex3[0], vertex4[1]-vertex3[1], vertex4[2]-vertex3[2]]
normal = [ v1[1]*v2[2]-v2[1]*v1[2], v1[2]*v2[0]-v2[2]*v1[0], v1[0]*v2[1]-v2[0]*v1[1] ]
axis = AxisStruct(vertex1[0], vertex1[1], vertex1[2], normal[0], normal[1], normal[2])
- return axis
+ axis._mirrorType = SMESH.SMESH_MeshEditor.PLANE
elif len(edges) == 1:
vertex1, vertex2 = self.geompyD.SubShapeAll( edges[0], geomBuilder.geomBuilder.ShapeType["VERTEX"] )
p1 = self.geompyD.PointCoordinates( vertex1 )
p2 = self.geompyD.PointCoordinates( vertex2 )
axis = AxisStruct(p1[0], p1[1], p1[2], p2[0]-p1[0], p2[1]-p1[1], p2[2]-p1[2])
- return axis
- return None
+ axis._mirrorType = SMESH.SMESH_MeshEditor.AXIS
+ elif theObj.GetShapeType() == GEOM.VERTEX:
+ x,y,z = self.geompyD.PointCoordinates( theObj )
+ axis = AxisStruct( x,y,z, 1,0,0,)
+ axis._mirrorType = SMESH.SMESH_MeshEditor.POINT
+ return axis
# From SMESH_Gen interface:
# ------------------------
notebook = salome_notebook.NoteBook( theStudy )
else:
notebook = salome_notebook.NoteBook( salome_notebook.PseudoStudyForNoteBook() )
+ if theStudy:
+ sb = theStudy.NewBuilder()
+ sc = theStudy.FindComponent("SMESH")
+ if sc: sb.LoadWith(sc, self)
+ pass
+ pass
## Gets the current study
# @ingroup l1_auxiliary
return aMeshes, aStatus
## Creates a Mesh object importing data from the given GMF file.
- # GMF files have .mesh extension for the ASCII format and .meshb for
- # the bynary format.
+ # GMF files must have .mesh extension for the ASCII format and .meshb for
+ # the binary format.
# @return [ an instance of Mesh class, SMESH.ComputeError ]
# @ingroup l2_impexp
def CreateMeshesFromGMF( self, theFileName ):
# pass result of Mesh.GetIDSource( list_of_ids, type ) as meshPart
# @param meshName a name of the new mesh
# @param toCopyGroups to create in the new mesh groups the copied elements belongs to
- # @param toKeepIDs to preserve IDs of the copied elements or not
+ # @param toKeepIDs to preserve order of the copied elements or not
# @return an instance of Mesh class
def CopyMesh( self, meshPart, meshName, toCopyGroups=False, toKeepIDs=False):
if (isinstance( meshPart, Mesh )):
## Creates a filter from criteria
# @param criteria a list of criteria
+ # @param binOp binary operator used when binary operator of criteria is undefined
# @return SMESH_Filter
#
# <a href="../tui_filters_page.html#tui_filters">Example of Filters usage</a>
# @ingroup l1_controls
- def GetFilterFromCriteria(self,criteria):
+ def GetFilterFromCriteria(self,criteria, binOp=SMESH.FT_LogicalAND):
+ for i in range( len( criteria ) - 1 ):
+ if criteria[i].BinaryOp == self.EnumToLong( SMESH.FT_Undefined ):
+ criteria[i].BinaryOp = self.EnumToLong( binOp )
aFilterMgr = self.CreateFilterManager()
aFilter = aFilterMgr.CreateFilter()
aFilter.SetCriteria(criteria)
if not hasattr(src1, "_narrow"): return None
src1 = src1._narrow(SMESH.SMESH_IDSource)
if not src1: return None
+ unRegister = genObjUnRegister()
if id1 != 0:
m = src1.GetMesh()
e = m.GetMeshEditor()
src1 = e.MakeIDSource([id1], SMESH.FACE)
else:
src1 = e.MakeIDSource([id1], SMESH.NODE)
+ unRegister.set( src1 )
pass
if hasattr(src2, "_narrow"):
src2 = src2._narrow(SMESH.SMESH_IDSource)
src2 = e.MakeIDSource([id2], SMESH.FACE)
else:
src2 = e.MakeIDSource([id2], SMESH.NODE)
+ unRegister.set( src2 )
pass
pass
aMeasurements = self.CreateMeasurements()
+ unRegister.set( aMeasurements )
result = aMeasurements.MinDistance(src1, src2)
- aMeasurements.UnRegister()
return result
## Get bounding box of the specified object(s)
aMeasurements.UnRegister()
return result
+ ## Get sum of lengths of all 1D elements in the mesh object.
+ # @param obj mesh, submesh or group
+ # @return sum of lengths of all 1D elements
+ # @ingroup l1_measurements
+ def GetLength(self, obj):
+ if isinstance(obj, Mesh): obj = obj.mesh
+ if isinstance(obj, Mesh_Algorithm): obj = obj.GetSubMesh()
+ aMeasurements = self.CreateMeasurements()
+ value = aMeasurements.Length(obj)
+ aMeasurements.UnRegister()
+ return value
+
+ ## Get sum of areas of all 2D elements in the mesh object.
+ # @param obj mesh, submesh or group
+ # @return sum of areas of all 2D elements
+ # @ingroup l1_measurements
+ def GetArea(self, obj):
+ if isinstance(obj, Mesh): obj = obj.mesh
+ if isinstance(obj, Mesh_Algorithm): obj = obj.GetSubMesh()
+ aMeasurements = self.CreateMeasurements()
+ value = aMeasurements.Area(obj)
+ aMeasurements.UnRegister()
+ return value
+
+ ## Get sum of volumes of all 3D elements in the mesh object.
+ # @param obj mesh, submesh or group
+ # @return sum of volumes of all 3D elements
+ # @ingroup l1_measurements
+ def GetVolume(self, obj):
+ if isinstance(obj, Mesh): obj = obj.mesh
+ if isinstance(obj, Mesh_Algorithm): obj = obj.GetSubMesh()
+ aMeasurements = self.CreateMeasurements()
+ value = aMeasurements.Volume(obj)
+ aMeasurements.UnRegister()
+ return value
+
+ pass # end of class smeshBuilder
+
import omniORB
#Registering the new proxy for SMESH_Gen
omniORB.registerObjref(SMESH._objref_SMESH_Gen._NP_RepositoryId, smeshBuilder)
# new nodes and elements and by changing the existing entities), to get information
# about a mesh and to export a mesh into different formats.
class Mesh:
+ __metaclass__ = MeshMeta
geom = 0
mesh = 0
else:
geo_name = "%s_%s to mesh"%(self.geom.GetShapeType(), id(self.geom)%100)
geompyD.addToStudy( self.geom, geo_name )
- self.mesh = self.smeshpyD.CreateMesh(self.geom)
+ self.SetMesh( self.smeshpyD.CreateMesh(self.geom) )
elif isinstance(obj, SMESH._objref_SMESH_Mesh):
self.SetMesh(obj)
else:
- self.mesh = self.smeshpyD.CreateEmptyMesh()
+ self.SetMesh( self.smeshpyD.CreateEmptyMesh() )
if name:
self.smeshpyD.SetName(self.mesh, name)
elif objHasName:
if isinstance( attr, algoCreator ):
#print "algoCreator ", attrName
setattr( self, attrName, attr.copy( self ))
+ pass
+ pass
+ pass
+ ## Destructor. Clean-up resources
+ def __del__(self):
+ if self.mesh:
+ #self.mesh.UnRegister()
+ pass
+ pass
+
## Initializes the Mesh object from an instance of SMESH_Mesh interface
# @param theMesh a SMESH_Mesh object
# @ingroup l2_construct
def SetMesh(self, theMesh):
- if self.mesh: self.mesh.UnRegister()
+ # do not call Register() as this prevents mesh servant deletion at closing study
+ #if self.mesh: self.mesh.UnRegister()
self.mesh = theMesh
if self.mesh:
- self.mesh.Register()
+ #self.mesh.Register()
self.geom = self.mesh.GetShapeToMesh()
+ pass
## Returns the mesh, that is an instance of SMESH_Mesh interface
# @return a SMESH_Mesh object
smeshgui.SetMeshIcon( salome.ObjectToID( self.mesh ), False, True )
salome.sg.updateObjBrowser(1)
- ## Computes a tetrahedral mesh using AutomaticLength + MEFISTO + NETGEN
+ ## Computes a tetrahedral mesh using AutomaticLength + MEFISTO + Tetrahedron
# @param fineness [0.0,1.0] defines mesh fineness
# @return True or False
# @ingroup l3_algos_basic
self.Triangle().LengthFromEdges()
pass
if dim > 2 :
- from salome.NETGENPlugin.NETGENPluginBuilder import NETGEN
- self.Tetrahedron(NETGEN)
+ self.Tetrahedron()
pass
return self.Compute()
if not geom:
geom = self.mesh.GetShapeToMesh()
pass
- AssureGeomPublished( self, geom, "shape for %s" % hyp.GetName())
- status = self.mesh.AddHypothesis(geom, hyp)
- isAlgo = hyp._narrow( SMESH_Algo )
+ isApplicable = True
+ if self.mesh.HasShapeToMesh():
+ hyp_type = hyp.GetName()
+ lib_name = hyp.GetLibName()
+ checkAll = ( not geom.IsSame( self.mesh.GetShapeToMesh() ))
+ if checkAll and geom:
+ checkAll = geom.GetType() == 37
+ isApplicable = self.smeshpyD.IsApplicable(hyp_type, lib_name, geom, checkAll)
+ if isApplicable:
+ AssureGeomPublished( self, geom, "shape for %s" % hyp.GetName())
+ status = self.mesh.AddHypothesis(geom, hyp)
+ else:
+ status = HYP_BAD_GEOMETRY,""
hyp_name = GetName( hyp )
geom_name = ""
if geom:
- geom_name = GetName( geom )
- TreatHypoStatus( status, hyp_name, geom_name, isAlgo )
+ geom_name = geom.GetName()
+ isAlgo = hyp._narrow( SMESH_Algo )
+ TreatHypoStatus( status, hyp_name, geom_name, isAlgo, self )
return status
## Return True if an algorithm of hypothesis is assigned to a given shape
# - 1D if all mesh nodes lie on OX coordinate axis, or
# - 2D if all mesh nodes lie on XOY coordinate plane, or
# - 3D in the rest cases.
- #
# If @a autoDimension is @c False, the space dimension is always 3.
+ # @param fields : list of GEOM fields defined on the shape to mesh.
+ # @param geomAssocFields : each character of this string means a need to export a
+ # corresponding field; correspondence between fields and characters is following:
+ # - 'v' stands for _vertices_ field;
+ # - 'e' stands for _edges_ field;
+ # - 'f' stands for _faces_ field;
+ # - 's' stands for _solids_ field.
# @ingroup l2_impexp
def ExportMED(self, f, auto_groups=0, version=MED_V2_2,
- overwrite=1, meshPart=None, autoDimension=True):
- if meshPart:
+ overwrite=1, meshPart=None, autoDimension=True, fields=[], geomAssocFields=''):
+ if meshPart or fields or geomAssocFields:
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
- self.mesh.ExportPartToMED( meshPart, f, auto_groups, version, overwrite, autoDimension)
+ unRegister.set( meshPart )
+ self.mesh.ExportPartToMED( meshPart, f, auto_groups, version, overwrite, autoDimension,
+ fields, geomAssocFields)
else:
self.mesh.ExportToMEDX(f, auto_groups, version, overwrite, autoDimension)
# @ingroup l2_impexp
def ExportDAT(self, f, meshPart=None):
if meshPart:
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
self.mesh.ExportPartToDAT( meshPart, f )
else:
self.mesh.ExportDAT(f)
# @ingroup l2_impexp
def ExportUNV(self, f, meshPart=None):
if meshPart:
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
self.mesh.ExportPartToUNV( meshPart, f )
else:
self.mesh.ExportUNV(f)
# @ingroup l2_impexp
def ExportSTL(self, f, ascii=1, meshPart=None):
if meshPart:
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
self.mesh.ExportPartToSTL( meshPart, f, ascii )
else:
self.mesh.ExportSTL(f, ascii)
# @param meshPart a part of mesh (group, sub-mesh) to export instead of the mesh
# @ingroup l2_impexp
def ExportCGNS(self, f, overwrite=1, meshPart=None):
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
if isinstance( meshPart, Mesh ):
meshPart = meshPart.mesh
elif not meshPart:
# @param meshPart a part of mesh (group, sub-mesh) to export instead of the mesh
# @ingroup l2_impexp
def ExportGMF(self, f, meshPart=None):
+ unRegister = genObjUnRegister()
if isinstance( meshPart, list ):
meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
if isinstance( meshPart, Mesh ):
meshPart = meshPart.mesh
elif not meshPart:
# @ingroup l2_grps_create
def MakeGroupByIds(self, groupName, elementType, elemIDs):
group = self.mesh.CreateGroup(elementType, groupName)
- group.Add(elemIDs)
+ if hasattr( elemIDs, "GetIDs" ):
+ if hasattr( elemIDs, "SetMesh" ):
+ elemIDs.SetMesh( self.GetMesh() )
+ group.AddFrom( elemIDs )
+ else:
+ group.Add(elemIDs)
return group
## Creates a mesh group by the given conditions
# @param UnaryOp FT_LogicalNOT or FT_Undefined
# @param Tolerance the tolerance used by FT_BelongToGeom, FT_BelongToSurface,
# FT_LyingOnGeom, FT_CoplanarFaces criteria
- # @return SMESH_Group
+ # @return SMESH_GroupOnFilter
# @ingroup l2_grps_create
def MakeGroup(self,
groupName,
## Creates a mesh group by the given criterion
# @param groupName the name of the mesh group
# @param Criterion the instance of Criterion class
- # @return SMESH_Group
+ # @return SMESH_GroupOnFilter
# @ingroup l2_grps_create
def MakeGroupByCriterion(self, groupName, Criterion):
- aFilterMgr = self.smeshpyD.CreateFilterManager()
- aFilter = aFilterMgr.CreateFilter()
- aCriteria = []
- aCriteria.append(Criterion)
- aFilter.SetCriteria(aCriteria)
- group = self.MakeGroupByFilter(groupName, aFilter)
- aFilterMgr.UnRegister()
- return group
+ return self.MakeGroupByCriteria( groupName, [Criterion] )
## Creates a mesh group by the given criteria (list of criteria)
# @param groupName the name of the mesh group
# @param theCriteria the list of criteria
- # @return SMESH_Group
+ # @param binOp binary operator used when binary operator of criteria is undefined
+ # @return SMESH_GroupOnFilter
# @ingroup l2_grps_create
- def MakeGroupByCriteria(self, groupName, theCriteria):
- aFilterMgr = self.smeshpyD.CreateFilterManager()
- aFilter = aFilterMgr.CreateFilter()
- aFilter.SetCriteria(theCriteria)
+ def MakeGroupByCriteria(self, groupName, theCriteria, binOp=SMESH.FT_LogicalAND):
+ aFilter = self.smeshpyD.GetFilterFromCriteria( theCriteria, binOp )
group = self.MakeGroupByFilter(groupName, aFilter)
- aFilterMgr.UnRegister()
return group
## Creates a mesh group by the given filter
# @param groupName the name of the mesh group
# @param theFilter the instance of Filter class
- # @return SMESH_Group
+ # @return SMESH_GroupOnFilter
# @ingroup l2_grps_create
def MakeGroupByFilter(self, groupName, theFilter):
- group = self.CreateEmptyGroup(theFilter.GetElementType(), groupName)
- theFilter.SetMesh( self.mesh )
- group.AddFrom( theFilter )
+ #group = self.CreateEmptyGroup(theFilter.GetElementType(), groupName)
+ #theFilter.SetMesh( self.mesh )
+ #group.AddFrom( theFilter )
+ group = self.GroupOnFilter( theFilter.GetElementType(), groupName, theFilter )
return group
## Removes a group
def RemoveGroupWithContents(self, group):
self.mesh.RemoveGroupWithContents(group)
- ## Gets the list of groups existing in the mesh
+ ## Gets the list of groups existing in the mesh in the order of creation (starting from the oldest one)
# @return a sequence of SMESH_GroupBase
# @ingroup l2_grps_create
def GetGroups(self):
def GetElementGeomType(self, id):
return self.mesh.GetElementGeomType(id)
+ ## Returns the shape type of mesh element
+ # @return the value from SMESH::GeometryType enumeration
+ # @ingroup l1_meshinfo
+ def GetElementShape(self, id):
+ return self.mesh.GetElementShape(id)
+
## Returns the list of submesh elements IDs
# @param Shape a geom object(sub-shape) IOR
# Shape must be the sub-shape of a ShapeToMesh()
def GetElemFaceNodes(self,elemId, faceIndex):
return self.mesh.GetElemFaceNodes(elemId, faceIndex)
+ ## Returns three components of normal of given mesh face
+ # (or an empty array in KO case)
+ # @ingroup l1_meshinfo
+ def GetFaceNormal(self, faceId, normalized=False):
+ return self.mesh.GetFaceNormal(faceId,normalized)
+
## Returns an element based on all given nodes.
# @ingroup l1_meshinfo
def FindElementByNodes(self,nodes):
aMeasurements = self.smeshpyD.CreateMeasurements()
aMeasure = aMeasurements.MinDistance(id1, id2)
- aMeasurements.UnRegister()
+ genObjUnRegister([aMeasurements,id1, id2])
return aMeasure
## Get bounding box of the specified object(s)
## Get measure structure specifying bounding box data of the specified object(s)
# @param IDs single source object or list of source objects or list of nodes/elements IDs
- # @param isElem if @a objects is a list of IDs, @c True value in this parameters specifies that @a objects are elements,
+ # @param isElem if @a IDs is a list of IDs, @c True value in this parameters specifies that @a objects are elements,
# @c False specifies that @a objects are nodes
# @return Measure structure
# @sa BoundingBox()
if len(IDs) > 0 and isinstance(IDs[0], int):
IDs = [IDs]
srclist = []
+ unRegister = genObjUnRegister()
for o in IDs:
if isinstance(o, Mesh):
srclist.append(o.mesh)
srclist.append(self.editor.MakeIDSource(o, SMESH.FACE))
else:
srclist.append(self.editor.MakeIDSource(o, SMESH.NODE))
+ unRegister.set( srclist[-1] )
pass
pass
aMeasurements = self.smeshpyD.CreateMeasurements()
+ unRegister.set( aMeasurements )
aMeasure = aMeasurements.BoundingBox(srclist)
- aMeasurements.UnRegister()
return aMeasure
# Mesh edition (SMESH_MeshEditor functionality):
# can be retrieved from the returned object by calling GetIDs()
# @ingroup l2_modif_add
def Add0DElementsToAllNodes(self, theObject, theGroupName=""):
+ unRegister = genObjUnRegister()
if isinstance( theObject, Mesh ):
theObject = theObject.GetMesh()
if isinstance( theObject, list ):
theObject = self.GetIDSource( theObject, SMESH.ALL )
+ unRegister.set( theObject )
return self.editor.Create0DElementsOnAllNodes( theObject, theGroupName )
## Creates a ball element on a node with given ID.
# @return number of reoriented faces
# @ingroup l2_modif_changori
def Reorient2D(self, the2DObject, theDirection, theFaceOrPoint ):
+ unRegister = genObjUnRegister()
# check the2DObject
if isinstance( the2DObject, Mesh ):
the2DObject = the2DObject.GetMesh()
if isinstance( the2DObject, list ):
the2DObject = self.GetIDSource( the2DObject, SMESH.FACE )
+ unRegister.set( the2DObject )
# check theDirection
if isinstance( theDirection, geomBuilder.GEOM._objref_GEOM_Object):
theDirection = self.smeshpyD.GetDirStruct( theDirection )
theFace = -1
return self.editor.Reorient2D( the2DObject, theDirection, theFace, thePoint )
+ ## Reorient faces according to adjacent volumes.
+ # @param the2DObject is a mesh, sub-mesh, group or list of
+ # either IDs of faces or face groups.
+ # @param the3DObject is a mesh, sub-mesh, group or list of IDs of volumes.
+ # @param theOutsideNormal to orient faces to have their normals
+ # pointing either \a outside or \a inside the adjacent volumes.
+ # @return number of reoriented faces.
+ # @ingroup l2_modif_changori
+ def Reorient2DBy3D(self, the2DObject, the3DObject, theOutsideNormal=True ):
+ unRegister = genObjUnRegister()
+ # check the2DObject
+ if not isinstance( the2DObject, list ):
+ the2DObject = [ the2DObject ]
+ elif the2DObject and isinstance( the2DObject[0], int ):
+ the2DObject = self.GetIDSource( the2DObject, SMESH.FACE )
+ unRegister.set( the2DObject )
+ the2DObject = [ the2DObject ]
+ for i,obj2D in enumerate( the2DObject ):
+ if isinstance( obj2D, Mesh ):
+ the2DObject[i] = obj2D.GetMesh()
+ if isinstance( obj2D, list ):
+ the2DObject[i] = self.GetIDSource( obj2D, SMESH.FACE )
+ unRegister.set( the2DObject[i] )
+ # check the3DObject
+ if isinstance( the3DObject, Mesh ):
+ the3DObject = the3DObject.GetMesh()
+ if isinstance( the3DObject, list ):
+ the3DObject = self.GetIDSource( the3DObject, SMESH.VOLUME )
+ unRegister.set( the3DObject )
+ return self.editor.Reorient2DBy3D( the2DObject, the3DObject, theOutsideNormal )
+
## Fuses the neighbouring triangles into quadrangles.
# @param IDsOfElements The triangles to be fused,
# @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
# group or a list of face IDs. By default all quadrangles are split
# @ingroup l2_modif_cutquadr
def QuadTo4Tri (self, theElements=[]):
+ unRegister = genObjUnRegister()
if isinstance( theElements, Mesh ):
theElements = theElements.mesh
elif not theElements:
theElements = self.mesh
elif isinstance( theElements, list ):
theElements = self.GetIDSource( theElements, SMESH.FACE )
+ unRegister.set( theElements )
return self.editor.QuadTo4Tri( theElements )
## Splits quadrangles into triangles.
return self.editor.BestSplit(IDOfQuad, self.smeshpyD.GetFunctor(theCriterion))
## Splits volumic elements into tetrahedrons
- # @param elemIDs either list of elements or mesh or group or submesh
- # @param method flags passing splitting method: Hex_5Tet, Hex_6Tet, Hex_24Tet
- # Hex_5Tet - split the hexahedron into 5 tetrahedrons, etc
+ # @param elems either a list of elements or a mesh or a group or a submesh or a filter
+ # @param method flags passing splitting method:
+ # smesh.Hex_5Tet, smesh.Hex_6Tet, smesh.Hex_24Tet.
+ # smesh.Hex_5Tet - to split the hexahedron into 5 tetrahedrons, etc.
# @ingroup l2_modif_cutquadr
- def SplitVolumesIntoTetra(self, elemIDs, method=smeshBuilder.Hex_5Tet ):
- if isinstance( elemIDs, Mesh ):
- elemIDs = elemIDs.GetMesh()
- if ( isinstance( elemIDs, list )):
- elemIDs = self.editor.MakeIDSource(elemIDs, SMESH.VOLUME)
- self.editor.SplitVolumesIntoTetra(elemIDs, method)
+ def SplitVolumesIntoTetra(self, elems, method=smeshBuilder.Hex_5Tet ):
+ unRegister = genObjUnRegister()
+ if isinstance( elems, Mesh ):
+ elems = elems.GetMesh()
+ if ( isinstance( elems, list )):
+ elems = self.editor.MakeIDSource(elems, SMESH.VOLUME)
+ unRegister.set( elems )
+ self.editor.SplitVolumesIntoTetra(elems, method)
+
+ ## Splits hexahedra into prisms
+ # @param elems either a list of elements or a mesh or a group or a submesh or a filter
+ # @param startHexPoint a point used to find a hexahedron for which @a facetNormal
+ # gives a normal vector defining facets to split into triangles.
+ # @a startHexPoint can be either a triple of coordinates or a vertex.
+ # @param facetNormal a normal to a facet to split into triangles of a
+ # hexahedron found by @a startHexPoint.
+ # @a facetNormal can be either a triple of coordinates or an edge.
+ # @param method flags passing splitting method: smesh.Hex_2Prisms, smesh.Hex_4Prisms.
+ # smesh.Hex_2Prisms - to split the hexahedron into 2 prisms, etc.
+ # @param allDomains if @c False, only hexahedra adjacent to one closest
+ # to @a startHexPoint are split, else @a startHexPoint
+ # is used to find the facet to split in all domains present in @a elems.
+ # @ingroup l2_modif_cutquadr
+ def SplitHexahedraIntoPrisms(self, elems, startHexPoint, facetNormal,
+ method=smeshBuilder.Hex_2Prisms, allDomains=False ):
+ # IDSource
+ unRegister = genObjUnRegister()
+ if isinstance( elems, Mesh ):
+ elems = elems.GetMesh()
+ if ( isinstance( elems, list )):
+ elems = self.editor.MakeIDSource(elems, SMESH.VOLUME)
+ unRegister.set( elems )
+ pass
+ # axis
+ if isinstance( startHexPoint, geomBuilder.GEOM._objref_GEOM_Object):
+ startHexPoint = self.smeshpyD.GetPointStruct( startHexPoint )
+ elif isinstance( startHexPoint, list ):
+ startHexPoint = SMESH.PointStruct( startHexPoint[0],
+ startHexPoint[1],
+ startHexPoint[2])
+ if isinstance( facetNormal, geomBuilder.GEOM._objref_GEOM_Object):
+ facetNormal = self.smeshpyD.GetDirStruct( facetNormal )
+ elif isinstance( facetNormal, list ):
+ facetNormal = self.smeshpyD.MakeDirStruct( facetNormal[0],
+ facetNormal[1],
+ facetNormal[2])
+ self.mesh.SetParameters( startHexPoint.parameters + facetNormal.PS.parameters )
+
+ self.editor.SplitHexahedraIntoPrisms(elems, startHexPoint, facetNormal, method, allDomains)
## Splits quadrangle faces near triangular facets of volumes
#
# Note that nodes built on edges and boundary nodes are always fixed.
# @param MaxNbOfIterations the maximum number of iterations
# @param MaxAspectRatio varies in range [1.0, inf]
- # @param Method is Laplacian(LAPLACIAN_SMOOTH) or Centroidal(CENTROIDAL_SMOOTH)
+ # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH)
+ # or Centroidal (smesh.CENTROIDAL_SMOOTH)
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_smooth
def Smooth(self, IDsOfElements, IDsOfFixedNodes,
# Note that nodes built on edges and boundary nodes are always fixed.
# @param MaxNbOfIterations the maximum number of iterations
# @param MaxAspectRatio varies in range [1.0, inf]
- # @param Method is Laplacian(LAPLACIAN_SMOOTH) or Centroidal(CENTROIDAL_SMOOTH)
+ # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH)
+ # or Centroidal (smesh.CENTROIDAL_SMOOTH)
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_smooth
def SmoothObject(self, theObject, IDsOfFixedNodes,
# Note that nodes built on edges and boundary nodes are always fixed.
# @param MaxNbOfIterations the maximum number of iterations
# @param MaxAspectRatio varies in range [1.0, inf]
- # @param Method is Laplacian(LAPLACIAN_SMOOTH) or Centroidal(CENTROIDAL_SMOOTH)
+ # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH)
+ # or Centroidal (smesh.CENTROIDAL_SMOOTH)
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_smooth
def SmoothParametric(self, IDsOfElements, IDsOfFixedNodes,
# Note that nodes built on edges and boundary nodes are always fixed.
# @param MaxNbOfIterations the maximum number of iterations
# @param MaxAspectRatio varies in range [1.0, inf]
- # @param Method Laplacian(LAPLACIAN_SMOOTH) or Centroidal(CENTROIDAL_SMOOTH)
+ # @param Method is either Laplacian (smesh.LAPLACIAN_SMOOTH)
+ # or Centroidal (smesh.CENTROIDAL_SMOOTH)
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_smooth
def SmoothParametricObject(self, theObject, IDsOfFixedNodes,
# them with quadratic with the same id.
# @param theForce3d new node creation method:
# 0 - the medium node lies at the geometrical entity from which the mesh element is built
- # 1 - the medium node lies at the middle of the line segments connecting start and end node of a mesh element
+ # 1 - the medium node lies at the middle of the line segments connecting two nodes of a mesh element
# @param theSubMesh a group or a sub-mesh to convert; WARNING: in this case the mesh can become not conformal
# @param theToBiQuad If True, converts the mesh to bi-quadratic
# @ingroup l2_modif_tofromqu
- def ConvertToQuadratic(self, theForce3d, theSubMesh=None, theToBiQuad=False):
+ def ConvertToQuadratic(self, theForce3d=False, theSubMesh=None, theToBiQuad=False):
if isinstance( theSubMesh, Mesh ):
theSubMesh = theSubMesh.mesh
if theToBiQuad:
# the new mesh else only boundary elements will be copied into the new mesh
# @param toCopyExistingBondary - if true, not only new but also pre-existing
# boundary elements will be copied into the new mesh
- # @return tuple (mesh, group) where bondary elements were added to
+ # @return tuple (mesh, group) where boundary elements were added to
# @ingroup l2_modif_edit
def MakeBoundaryMesh(self, elements, dimension=SMESH.BND_2DFROM3D, groupName="", meshName="",
toCopyElements=False, toCopyExistingBondary=False):
+ unRegister = genObjUnRegister()
if isinstance( elements, Mesh ):
elements = elements.GetMesh()
if ( isinstance( elements, list )):
elemType = SMESH.ALL
if elements: elemType = self.GetElementType( elements[0], iselem=True)
elements = self.editor.MakeIDSource(elements, elemType)
+ unRegister.set( elements )
mesh, group = self.editor.MakeBoundaryMesh(elements,dimension,groupName,meshName,
toCopyElements,toCopyExistingBondary)
if mesh: mesh = self.smeshpyD.Mesh(mesh)
##
# @brief Creates missing boundary elements around either the whole mesh or
- # groups of 2D elements
+ # groups of elements
# @param dimension - defines type of boundary elements to create
# @param groupName - a name of group to store all boundary elements in,
# "" means not to create the group
# mesh + created boundary elements; "" means not to create the new mesh
# @param toCopyAll - if true, the whole initial mesh will be copied into
# the new mesh else only boundary elements will be copied into the new mesh
- # @param groups - groups of 2D elements to make boundary around
+ # @param groups - groups of elements to make boundary around
# @retval tuple( long, mesh, groups )
# long - number of added boundary elements
# mesh - the mesh where elements were added to
if mesh: mesh = self.smeshpyD.Mesh(mesh)
return nb, mesh, group
- ## Renumber mesh nodes
+ ## Renumber mesh nodes (Obsolete, does nothing)
# @ingroup l2_modif_renumber
def RenumberNodes(self):
self.editor.RenumberNodes()
- ## Renumber mesh elements
+ ## Renumber mesh elements (Obsole, does nothing)
# @ingroup l2_modif_renumber
def RenumberElements(self):
self.editor.RenumberElements()
ExtrFlags, SewTolerance)
return []
+ ## Generates new elements by extrusion along the normal to a discretized surface or wire
+ # @param Elements container of elements to extrude;
+ # it can be Mesh, Group, Sub-mesh, Filter or list of IDs;
+ # Only faces can be extruded so far. Sub-mesh sould be a sub-mesh on geom faces.
+ # @param StepSize length of one extrusion step (the total extrusion
+ # length will be \a NbOfSteps * \a StepSize ).
+ # @param NbOfSteps number of extrusion steps.
+ # @param ByAverageNormal if True each node is translated by \a StepSize
+ # along the average of the normal vectors to the faces sharing the node;
+ # else each node is translated along the same average normal till
+ # intersection with the plane got by translation of the face sharing
+ # the node along its own normal by \a StepSize.
+ # @param UseInputElemsOnly to use only \a Elements when computing extrusion direction
+ # for every node of \a Elements.
+ # @param MakeGroups forces generation of new groups from existing ones.
+ # @param Dim dimension of elements to extrude: 2 - faces or 1 - edges. Extrusion of edges
+ # is not yet implemented. This parameter is used if \a Elements contains
+ # both faces and edges, i.e. \a Elements is a Mesh.
+ # @return the list of created groups (SMESH_GroupBase) if \a MakeGroups=True,
+ # empty list otherwise.
+ # @ingroup l2_modif_extrurev
+ def ExtrusionByNormal(self, Elements, StepSize, NbOfSteps,
+ ByAverageNormal=False, UseInputElemsOnly=True, MakeGroups=False, Dim = 2):
+ unRegister = genObjUnRegister()
+ if isinstance( Elements, Mesh ):
+ Elements = Elements.GetMesh()
+ if isinstance( Elements, list ):
+ if not Elements:
+ raise RuntimeError, "List of element IDs is empty!"
+ if not isinstance( Elements[0], int ):
+ raise RuntimeError, "List must contain element IDs and not %s"% Elements[0]
+ Elements = self.GetIDSource( Elements, SMESH.ALL )
+ unRegister.set( Elements )
+ StepSize,NbOfSteps,Parameters,hasVars = ParseParameters(StepSize,NbOfSteps)
+ self.mesh.SetParameters(Parameters)
+ return self.editor.ExtrusionByNormal(Elements, StepSize, NbOfSteps,
+ UseInputElemsOnly, ByAverageNormal, MakeGroups, Dim)
+
## Generates new elements by extrusion of the elements which belong to the object
# @param theObject the object which elements should be processed.
# It can be a mesh, a sub mesh or a group.
# @param MakeGroups forces the generation of new groups from existing ones (if Copy)
# @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
# @ingroup l2_modif_trsf
- def Mirror(self, IDsOfElements, Mirror, theMirrorType, Copy=0, MakeGroups=False):
+ def Mirror(self, IDsOfElements, Mirror, theMirrorType=None, Copy=0, MakeGroups=False):
if IDsOfElements == []:
IDsOfElements = self.GetElementsId()
if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)):
- Mirror = self.smeshpyD.GetAxisStruct(Mirror)
- self.mesh.SetParameters(Mirror.parameters)
+ Mirror = self.smeshpyD.GetAxisStruct(Mirror)
+ theMirrorType = Mirror._mirrorType
+ else:
+ self.mesh.SetParameters(Mirror.parameters)
if Copy and MakeGroups:
return self.editor.MirrorMakeGroups(IDsOfElements, Mirror, theMirrorType)
self.editor.Mirror(IDsOfElements, Mirror, theMirrorType, Copy)
# @param NewMeshName a name of the new mesh to create
# @return instance of Mesh class
# @ingroup l2_modif_trsf
- def MirrorMakeMesh(self, IDsOfElements, Mirror, theMirrorType, MakeGroups=0, NewMeshName=""):
+ def MirrorMakeMesh(self, IDsOfElements, Mirror, theMirrorType=0, MakeGroups=0, NewMeshName=""):
if IDsOfElements == []:
IDsOfElements = self.GetElementsId()
if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)):
- Mirror = self.smeshpyD.GetAxisStruct(Mirror)
- self.mesh.SetParameters(Mirror.parameters)
+ Mirror = self.smeshpyD.GetAxisStruct(Mirror)
+ theMirrorType = Mirror._mirrorType
+ else:
+ self.mesh.SetParameters(Mirror.parameters)
mesh = self.editor.MirrorMakeMesh(IDsOfElements, Mirror, theMirrorType,
MakeGroups, NewMeshName)
return Mesh(self.smeshpyD,self.geompyD,mesh)
# @param MakeGroups forces the generation of new groups from existing ones (if Copy)
# @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
# @ingroup l2_modif_trsf
- def MirrorObject (self, theObject, Mirror, theMirrorType, Copy=0, MakeGroups=False):
+ def MirrorObject (self, theObject, Mirror, theMirrorType=None, Copy=0, MakeGroups=False):
if ( isinstance( theObject, Mesh )):
theObject = theObject.GetMesh()
if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)):
- Mirror = self.smeshpyD.GetAxisStruct(Mirror)
- self.mesh.SetParameters(Mirror.parameters)
+ Mirror = self.smeshpyD.GetAxisStruct(Mirror)
+ theMirrorType = Mirror._mirrorType
+ else:
+ self.mesh.SetParameters(Mirror.parameters)
if Copy and MakeGroups:
return self.editor.MirrorObjectMakeGroups(theObject, Mirror, theMirrorType)
self.editor.MirrorObject(theObject, Mirror, theMirrorType, Copy)
# @param NewMeshName the name of the new mesh to create
# @return instance of Mesh class
# @ingroup l2_modif_trsf
- def MirrorObjectMakeMesh (self, theObject, Mirror, theMirrorType,MakeGroups=0, NewMeshName=""):
+ def MirrorObjectMakeMesh (self, theObject, Mirror, theMirrorType=0,MakeGroups=0,NewMeshName=""):
if ( isinstance( theObject, Mesh )):
theObject = theObject.GetMesh()
- if (isinstance(Mirror, geomBuilder.GEOM._objref_GEOM_Object)):
- Mirror = self.smeshpyD.GetAxisStruct(Mirror)
- self.mesh.SetParameters(Mirror.parameters)
+ if ( isinstance( Mirror, geomBuilder.GEOM._objref_GEOM_Object)):
+ Mirror = self.smeshpyD.GetAxisStruct(Mirror)
+ theMirrorType = Mirror._mirrorType
+ else:
+ self.mesh.SetParameters(Mirror.parameters)
mesh = self.editor.MirrorObjectMakeMesh(theObject, Mirror, theMirrorType,
MakeGroups, NewMeshName)
return Mesh( self.smeshpyD,self.geompyD,mesh )
## Scales the object
# @param theObject - the object to translate (mesh, submesh, or group)
- # @param thePoint - base point for scale
+ # @param thePoint - base point for scale (SMESH.PointStruct or list of 3 coordinates)
# @param theScaleFact - list of 1-3 scale factors for axises
# @param Copy - allows copying the translated elements
# @param MakeGroups - forces the generation of new groups from existing
# @return list of created groups (SMESH_GroupBase) if MakeGroups=True,
# empty list otherwise
def Scale(self, theObject, thePoint, theScaleFact, Copy, MakeGroups=False):
+ unRegister = genObjUnRegister()
if ( isinstance( theObject, Mesh )):
theObject = theObject.GetMesh()
if ( isinstance( theObject, list )):
theObject = self.GetIDSource(theObject, SMESH.ALL)
+ unRegister.set( theObject )
+ if ( isinstance( thePoint, list )):
+ thePoint = PointStruct( thePoint[0], thePoint[1], thePoint[2] )
if ( isinstance( theScaleFact, float )):
theScaleFact = [theScaleFact]
if ( isinstance( theScaleFact, int )):
## Creates a new mesh from the translated object
# @param theObject - the object to translate (mesh, submesh, or group)
- # @param thePoint - base point for scale
+ # @param thePoint - base point for scale (SMESH.PointStruct or list of 3 coordinates)
# @param theScaleFact - list of 1-3 scale factors for axises
# @param MakeGroups - forces the generation of new groups from existing ones
# @param NewMeshName - the name of the newly created mesh
# @return instance of Mesh class
def ScaleMakeMesh(self, theObject, thePoint, theScaleFact, MakeGroups=False, NewMeshName=""):
+ unRegister = genObjUnRegister()
if (isinstance(theObject, Mesh)):
theObject = theObject.GetMesh()
if ( isinstance( theObject, list )):
theObject = self.GetIDSource(theObject,SMESH.ALL)
+ unRegister.set( theObject )
+ if ( isinstance( thePoint, list )):
+ thePoint = PointStruct( thePoint[0], thePoint[1], thePoint[2] )
if ( isinstance( theScaleFact, float )):
theScaleFact = [theScaleFact]
if ( isinstance( theScaleFact, int )):
self.mesh.SetParameters(Parameters)
return Mesh( self.smeshpyD, self.geompyD, mesh )
- ## Finds groups of ajacent nodes within Tolerance.
+ ## Finds groups of adjacent nodes within Tolerance.
# @param Tolerance the value of tolerance
- # @return the list of groups of nodes
+ # @return the list of pairs of nodes IDs (e.g. [[1,12],[25,4]])
# @ingroup l2_modif_trsf
def FindCoincidentNodes (self, Tolerance):
return self.editor.FindCoincidentNodes(Tolerance)
# @param Tolerance the value of tolerance
# @param SubMeshOrGroup SubMesh or Group
# @param exceptNodes list of either SubMeshes, Groups or node IDs to exclude from search
- # @return the list of groups of nodes
+ # @return the list of pairs of nodes IDs (e.g. [[1,12],[25,4]])
# @ingroup l2_modif_trsf
def FindCoincidentNodesOnPart (self, SubMeshOrGroup, Tolerance, exceptNodes=[]):
+ unRegister = genObjUnRegister()
if (isinstance( SubMeshOrGroup, Mesh )):
SubMeshOrGroup = SubMeshOrGroup.GetMesh()
if not isinstance( exceptNodes, list):
exceptNodes = [ exceptNodes ]
if exceptNodes and isinstance( exceptNodes[0], int):
exceptNodes = [ self.GetIDSource( exceptNodes, SMESH.NODE)]
+ unRegister.set( exceptNodes )
return self.editor.FindCoincidentNodesOnPartBut(SubMeshOrGroup, Tolerance,exceptNodes)
## Merges nodes
- # @param GroupsOfNodes the list of groups of nodes
+ # @param GroupsOfNodes a list of pairs of nodes IDs for merging (e.g. [[1,12],[25,4]])
# @ingroup l2_modif_trsf
def MergeNodes (self, GroupsOfNodes):
self.editor.MergeNodes(GroupsOfNodes)
## Finds the elements built on the same nodes.
# @param MeshOrSubMeshOrGroup Mesh or SubMesh, or Group of elements for searching
- # @return a list of groups of equal elements
+ # @return the list of pairs of equal elements IDs (e.g. [[1,12],[25,4]])
# @ingroup l2_modif_trsf
def FindEqualElements (self, MeshOrSubMeshOrGroup):
if ( isinstance( MeshOrSubMeshOrGroup, Mesh )):
return self.editor.FindEqualElements(MeshOrSubMeshOrGroup)
## Merges elements in each given group.
- # @param GroupsOfElementsID groups of elements for merging
+ # @param GroupsOfElementsID a list of pairs of elements IDs for merging (e.g. [[1,12],[25,4]])
# @ingroup l2_modif_trsf
def MergeElements(self, GroupsOfElementsID):
self.editor.MergeElements(GroupsOfElementsID)
# @return a group where the new elements are added. None if theGroupName == "".
# @ingroup l2_modif_edit
def DoubleElements(self, theElements, theGroupName=""):
+ unRegister = genObjUnRegister()
if isinstance( theElements, Mesh ):
theElements = theElements.mesh
elif isinstance( theElements, list ):
theElements = self.GetIDSource( theElements, SMESH.ALL )
+ unRegister.set( theElements )
return self.editor.DoubleElements(theElements, theGroupName)
## Creates a hole in a mesh by doubling the nodes of some particular elements
# Triangles are transformed in prisms, and quadrangles in hexahedrons.
# @param theDomains - list of groups of volumes
# @param createJointElems - if TRUE, create the elements
+ # @param onAllBoundaries - if TRUE, the nodes and elements are also created on
+ # the boundary between \a theDomains and the rest mesh
# @return TRUE if operation has been completed successfully, FALSE otherwise
- def DoubleNodesOnGroupBoundaries(self, theDomains, createJointElems ):
- return self.editor.DoubleNodesOnGroupBoundaries( theDomains, createJointElems )
+ def DoubleNodesOnGroupBoundaries(self, theDomains, createJointElems, onAllBoundaries=False ):
+ return self.editor.DoubleNodesOnGroupBoundaries( theDomains, createJointElems, onAllBoundaries )
## Double nodes on some external faces and create flat elements.
# Flat elements are mainly used by some types of mechanic calculations.
val = 0
return val
- ## Get length of 1D element.
- # @param elemId mesh element ID
- # @return element's length value
+ ## Get length of 1D element or sum of lengths of all 1D mesh elements
+ # @param elemId mesh element ID (if not defined - sum of length of all 1D elements will be calculated)
+ # @return element's length value if \a elemId is specified or sum of all 1D mesh elements' lengths otherwise
# @ingroup l1_measurements
- def GetLength(self, elemId):
- return self._valueFromFunctor(SMESH.FT_Length, elemId)
+ def GetLength(self, elemId=None):
+ length = 0
+ if elemId == None:
+ length = self.smeshpyD.GetLength(self)
+ else:
+ length = self._valueFromFunctor(SMESH.FT_Length, elemId)
+ return length
- ## Get area of 2D element.
- # @param elemId mesh element ID
- # @return element's area value
+ ## Get area of 2D element or sum of areas of all 2D mesh elements
+ # @param elemId mesh element ID (if not defined - sum of areas of all 2D elements will be calculated)
+ # @return element's area value if \a elemId is specified or sum of all 2D mesh elements' areas otherwise
# @ingroup l1_measurements
- def GetArea(self, elemId):
- return self._valueFromFunctor(SMESH.FT_Area, elemId)
+ def GetArea(self, elemId=None):
+ area = 0
+ if elemId == None:
+ area = self.smeshpyD.GetArea(self)
+ else:
+ area = self._valueFromFunctor(SMESH.FT_Area, elemId)
+ return area
- ## Get volume of 3D element.
- # @param elemId mesh element ID
- # @return element's volume value
+ ## Get volume of 3D element or sum of volumes of all 3D mesh elements
+ # @param elemId mesh element ID (if not defined - sum of volumes of all 3D elements will be calculated)
+ # @return element's volume value if \a elemId is specified or sum of all 3D mesh elements' volumes otherwise
# @ingroup l1_measurements
- def GetVolume(self, elemId):
- return self._valueFromFunctor(SMESH.FT_Volume3D, elemId)
+ def GetVolume(self, elemId=None):
+ volume = 0
+ if elemId == None:
+ volume = self.smeshpyD.GetVolume(self)
+ else:
+ volume = self._valueFromFunctor(SMESH.FT_Volume3D, elemId)
+ return volume
## Get maximum element length.
# @param elemId mesh element ID
def GetSkew(self, elemId):
return self._valueFromFunctor(SMESH.FT_Skew, elemId)
+ ## Return minimal and maximal value of a given functor.
+ # @param funType a functor type, an item of SMESH.FunctorType enum
+ # (one of SMESH.FunctorType._items)
+ # @param meshPart a part of mesh (group, sub-mesh) to treat
+ # @return tuple (min,max)
+ # @ingroup l1_measurements
+ def GetMinMax(self, funType, meshPart=None):
+ unRegister = genObjUnRegister()
+ if isinstance( meshPart, list ):
+ meshPart = self.GetIDSource( meshPart, SMESH.ALL )
+ unRegister.set( meshPart )
+ if isinstance( meshPart, Mesh ):
+ meshPart = meshPart.mesh
+ fun = self._getFunctor( funType )
+ if fun:
+ if meshPart:
+ hist = fun.GetLocalHistogram( 1, False, meshPart )
+ else:
+ hist = fun.GetHistogram( 1, False )
+ if hist:
+ return hist[0].min, hist[0].max
+ return None
+
pass # end of Mesh class
-
+
## Helper class for wrapping of SMESH.SMESH_Pattern CORBA class
#
class Pattern(SMESH._objref_SMESH_Pattern):
raise ValueError, detail # wrong variable name
return result
+ pass
+
+# A helper class that call UnRegister() of SALOME.GenericObj'es stored in it
+class genObjUnRegister:
+
+ def __init__(self, genObj=None):
+ self.genObjList = []
+ self.set( genObj )
+ return
+
+ def set(self, genObj):
+ "Store one or a list of of SALOME.GenericObj'es"
+ if isinstance( genObj, list ):
+ self.genObjList.extend( genObj )
+ else:
+ self.genObjList.append( genObj )
+ return
+
+ def __del__(self):
+ for genObj in self.genObjList:
+ if genObj and hasattr( genObj, "UnRegister" ):
+ genObj.UnRegister()
for pluginName in os.environ[ "SMESH_MeshersList" ].split( ":" ):
#
try:
exec( "from salome.%s.%s import *" % (pluginName, pluginBuilderName))
except Exception, e:
- print "Exception while loading %s: %s" % ( pluginBuilderName, e )
+ from salome_utils import verbose
+ if verbose(): print "Exception while loading %s: %s" % ( pluginBuilderName, e )
continue
exec( "from salome.%s import %s" % (pluginName, pluginBuilderName))
plugin = eval( pluginBuilderName )
