of smeshBuilder.Mesh class
"""
- docHelper = "Creates segment 1D algorithm for edges"
+ docHelper = "Create segment 1D algorithm for edges"
"""
doc string of the method
"""
Parameters:
l : for the length of segments that cut an edge
UseExisting : if == true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
p : precision, used for calculation of the number of segments.
The precision should be a positive, meaningful value within the range [0,1].
In general, the number of segments is calculated with the formula:
length : is optional maximal allowed length of segment, if it is omitted
the preestimated length is used that depends on geometry size
UseExisting : if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
Returns:
an instance of StdMeshers_MaxLength hypothesis
maxSize: defines the maximal allowed segment length
deflection: defines the maximal allowed distance from a segment to an edge
UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
Returns:
an instance of StdMeshers_Adaptive1D hypothesis
reversedEdges: is a list of edges to mesh using reversed orientation.
A list item can also be a tuple (edge, 1st_vertex_of_edge)
UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
Returns:
an instance of StdMeshers_Arithmetic1D hypothesis
reversedEdges: is a list of edges to mesh using reversed orientation.
A list item can also be a tuple (edge, 1st_vertex_of_edge)
UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
Returns:
an instance of StdMeshers_Geometric1D hypothesis
reversedEdges: is a list of edges to mesh using reversed orientation.
A list item can also be a tuple (edge, 1st_vertex_of_edge)
UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
Returns:
an instance of StdMeshers_FixedPoints1D hypothesis
reversedEdges: is a list of edges to mesh using reversed orientation.
A list item can also be a tuple (edge, 1st_vertex_of_edge)
UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
Returns:
an instance of StdMeshers_StartEndLength hypothesis
Any other integer value means that the hypothesis will be set on the
whole 1D shape, where Mesh_Segment algorithm is assigned.
UseExisting: if ==true - searches for an existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
import types
of smeshBuilder.Mesh class
"""
- docHelper = "Creates segment 1D algorithm for edges"
+ docHelper = "Create segment 1D algorithm for edges"
"""
doc string of the method
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates segment 1D algorithm for edges"
+ docHelper = "Create segment 1D algorithm for edges"
"""
doc string of the method
"""
n: for the number of segments that cut an edge
func: for the python function that calculates the length of all segments
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
compFun = lambda hyp, args: False
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates triangle 2D algorithm for faces"
+ docHelper = "Create triangle 2D algorithm for faces"
"""
doc string of the method
"""
Parameters:
area: for the maximum area of each triangle
UseExisting: if ==true - searches for an existing hypothesis created with the
- same parameters, else (default) - creates a new one
+ same parameters, else (default) - Create a new one
"""
from salome.smesh.smeshBuilder import IsEqual
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates quadrangle 2D algorithm for faces"
+ docHelper = "Create quadrangle 2D algorithm for faces"
"""
doc string of the method
"""
In the case if the defined QuadrangleParameters() refer to a sole face,
all given points must lie on this face, else the mesher fails.
UseExisting: if *True* - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
Parameters:
reversed: if True, transition area is located along the coarser meshed sides.
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
if reversed:
Parameters:
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
return self.QuadrangleParameters(QUAD_TRIANGLE_PREF,UseExisting=UseExisting)
Parameters:
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
return self.QuadrangleParameters(QUAD_REDUCED,UseExisting=UseExisting)
Vertex can be either a GEOM_Object or a vertex ID within the
shape to mesh
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
return self.QuadrangleParameters(QUAD_STANDARD,vertex,UseExisting)
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates hexahedron 3D algorithm for volumes"
+ docHelper = "Create hexahedron 3D algorithm for volumes"
"""
doc string of the method
"""
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates projection 1D algorithm for edges"
+ docHelper = "Create projection 1D algorithm for edges"
"""
doc string of the method
"""
srcV: a vertex of *edge* to associate with *tgtV* (optional)
tgtV: a vertex of *the edge* to which the algorithm is assigned, to associate with *srcV* (optional)
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
from salome.smesh.smeshBuilder import AssureGeomPublished, Mesh
AssureGeomPublished( self.mesh, edge )
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates projection 2D algorithm for faces"
+ docHelper = "Create projection 2D algorithm for faces"
"""
doc string of the method
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates projection 1D-2D algorithm for faces"
+ docHelper = "Create projection 1D-2D algorithm for faces"
"""
doc string of the method
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates projection 3D algorithm for volumes"
+ docHelper = "Create projection 3D algorithm for volumes"
"""
doc string of the method
"""
srcV2: a vertex of *solid* to associate with *tgtV1* (optional)
tgtV2: a vertex of *the solid* to which the algorithm is assigned,to associate with *srcV2* (optional)
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
Note:
association vertices must belong to one edge of a solid
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates prism 3D algorithm for volumes"
+ docHelper = "Create prism 3D algorithm for volumes"
"""
doc string of the method
"""
Parameters:
n: number of layers
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
if self.algoType != "RadialPrism_3D":
print("Prism_3D algorithm doesn't support any hypothesis")
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates Raial Prism 3D algorithm for volumes"
+ docHelper = "Create Raial Prism 3D algorithm for volumes"
"""
doc string of the method
"""
Parameters:
n: number of layers
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
if self.distribHyp:
self.mesh.GetMesh().RemoveHypothesis( self.geom, self.distribHyp )
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates quadrangle 1D-2D algorithm for faces having a shape of disk or a disk segment"
+ docHelper = "Create quadrangle 1D-2D algorithm for faces having a shape of disk or a disk segment"
"""
doc string of the method
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates quadrangle 1D-2D algorithm for faces"
+ docHelper = "Create quadrangle 1D-2D algorithm for faces"
"""
doc string of the method
"""
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates polygon 2D algorithm for faces"
+ docHelper = "Create polygon 2D algorithm for faces"
"""
doc string of the method
"""
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates 1D algorithm for edges with reusing of existing mesh elements"
+ docHelper = "Create 1D algorithm for edges with reusing of existing mesh elements"
"""
doc string of the method
"""
toCopyMesh: if True, the whole mesh *groups* belong to is imported
toCopyGroups: if True, all groups of the mesh *groups* belong to are imported
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
for group in groups:
from salome.smesh.smeshBuilder import AssureGeomPublished
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates 1D-2D algorithm for faces with reusing of existing mesh elements"
+ docHelper = "Create 1D-2D algorithm for faces with reusing of existing mesh elements"
"""
doc string of the method
"""
toCopyMesh: if True, the whole mesh *groups* belong to is imported
toCopyGroups: if True, all groups of the mesh *groups* belong to are imported
UseExisting: if ==true - searches for the existing hypothesis created with
- the same parameters, else (default) - creates a new one
+ the same parameters, else (default) - Create a new one
"""
import SMESH
compFun = lambda hyp, args: ( hyp.GetSourceFaces() == args[0] and \
flag pointing whether this algorithm should be used by default in dynamic method
of smeshBuilder.Mesh class
"""
- docHelper = "Creates Body Fitting 3D algorithm for volumes"
+ docHelper = "Create Body Fitting 3D algorithm for volumes"
"""
doc string of the method
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates 1D algorithm allowing batch meshing of edges"
+ docHelper = "Create 1D algorithm allowing batch meshing of edges"
"""
doc string of the method
"""
"""
type of algorithm used with helper function in smeshBuilder.Mesh class
"""
- docHelper = "Creates 2D algorithm allowing batch meshing of faces"
+ docHelper = "Create 2D algorithm allowing batch meshing of faces"
"""
doc string of the method
"""
