-#import SMESH
-import smeshpy
-import salome
-from salome import sg
+# -*- coding: iso-8859-1 -*-
+# Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
+#
+# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+# File : SMESH_test3.py
+# Module : SMESH
+#import salome
+#
import math
-#import SMESH_BasicHypothesis_idl
-
import geompy
-geom = salome.lcc.FindOrLoadComponent("FactoryServer", "GEOM")
-myBuilder = salome.myStudy.NewBuilder()
-from geompy import gg
+pi = math.pi
-smeshgui = salome.ImportComponentGUI("SMESH")
-smeshgui.Init(salome.myStudyId);
+# ---------------------------------------------
+xa = math.sin(pi/12)
+ya = 0
+za = math.cos(pi/12)
-ShapeTypeCompSolid = 1
-ShapeTypeSolid = 2
-ShapeTypeShell = 3
-ShapeTypeFace = 4
-ShapeTypeWire = 5
-ShapeTypeEdge = 6
-ShapeTypeVertex = 7
+xb = 0
+yb = math.sin(pi/18)
+zb = math.cos(pi/18)
-pi=math.pi
+xc = math.cos(-pi/18)
+yc = 0
+zc = math.sin(-pi/18)
-# ---------------------------------------------
-xa=math.sin(pi/12)
-ya=0
-za=math.cos(pi/12)
-
-xb=0
-yb=math.sin(pi/18)
-zb=math.cos(pi/18)
-
-xc=math.cos(-pi/18)
-yc=0
-zc=math.sin(-pi/18)
-
-rc1=150
-hc1=300
-rc2=150
-rc3=150
-rc4=300
-# ---------------------------------------------
-point_0 = geom.MakePointStruct(0, 0, 0)
-point_z = geom.MakePointStruct(0, 0, 1)
+rc1 = 150
+rc2 = 150
+rc3 = 150
+rc4 = 300
-point_a = geom.MakePointStruct(xa, ya, za)
-point_b = geom.MakePointStruct(xb, yb, zb)
-point_c = geom.MakePointStruct(xc, yc, zc)
+hc1 = 300
+hc2 = 2*hc1
+hc3 = 2*hc1
+hc4 = 2*hc1
-dir_z = geom.MakeDirection(point_z)
-axe_z = geom.MakeAxisStruct(0, 0, 0, 0, 0, 1)
+# ---------------------------------------------
+point_0 = geompy.MakeVertex(0, 0, 0)
+point_z = geompy.MakeVertex(0, 0, 1)
-dir_a = geom.MakeDirection(point_a)
-axe_a = geom.MakeAxisStruct(0, 0, 0, xa, ya, za)
+point_a = geompy.MakeVertex(xa, ya, za)
+point_b = geompy.MakeVertex(xb, yb, zb)
+point_c = geompy.MakeVertex(xc, yc, zc)
-dir_b = geom.MakeDirection(point_b)
-axe_b = geom.MakeAxisStruct(0, 0, 0, xb, yb, zb)
+dir_z = geompy.MakeVector(point_0, point_z)
+dir_a = geompy.MakeVector(point_0, point_a)
+dir_b = geompy.MakeVector(point_0, point_b)
+dir_c = geompy.MakeVector(point_0, point_c)
-dir_c = geom.MakeDirection(point_c)
-axe_c = geom.MakeAxisStruct(0, 0, 0, xc, yc, zc)
+axe_z = dir_z
+axe_a = dir_a
+axe_b = dir_b
+axe_c = dir_c
cyl_1 = geompy.MakeCylinder(point_0, dir_z, rc1, hc1)
-hc2=2*hc1
cyl_t = geompy.MakeCylinder(point_0, dir_a, rc2, hc2)
cyl_a = geompy.MakeTranslation(cyl_t, 1.2*rc1, 0.1*rc1, -0.5*hc1)
-hc3=2*hc1
cyl_t = geompy.MakeCylinder(point_0, dir_b, rc3, hc3)
cyl_b = geompy.MakeTranslation(cyl_t, -1.2*rc1, -0.1*rc1, -0.5*hc1)
-hc4=2*hc1
cyl_t = geompy.MakeCylinder(point_0, dir_c, rc4, hc4)
cyl_t = geompy.MakeRotation(cyl_t, axe_c, pi/2)
cyl_c = geompy.MakeTranslation(cyl_t, -hc1, 0, 0)
