#include <unistd.h>
#endif
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyObject ,Standard_Transient);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyCommand ,Standard_Transient);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyHypothesisReader,Standard_Transient);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyGen ,_pyObject);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyMesh ,_pyObject);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pySubMesh ,_pyObject);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyMeshEditor ,_pyObject);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyHypothesis ,_pyObject);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pySelfEraser ,_pyObject);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyGroup ,_pyObject);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyFilter ,_pyObject);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyAlgorithm ,_pyHypothesis);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyComplexParamHypo,_pyHypothesis);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyNumberOfSegmentsHyp,_pyHypothesis);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pyLayerDistributionHypo,_pyHypothesis);
-OCCT_IMPLEMENT_STANDARD_RTTIEXT(_pySegmentLengthAroundVertexHyp,_pyHypothesis);
+IMPLEMENT_STANDARD_RTTIEXT(_pyObject ,Standard_Transient);
+IMPLEMENT_STANDARD_RTTIEXT(_pyCommand ,Standard_Transient);
+IMPLEMENT_STANDARD_RTTIEXT(_pyHypothesisReader,Standard_Transient);
+IMPLEMENT_STANDARD_RTTIEXT(_pyGen ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pyMesh ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pySubMesh ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pyMeshEditor ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pyHypothesis ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pySelfEraser ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pyGroup ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pyFilter ,_pyObject);
+IMPLEMENT_STANDARD_RTTIEXT(_pyAlgorithm ,_pyHypothesis);
+IMPLEMENT_STANDARD_RTTIEXT(_pyComplexParamHypo,_pyHypothesis);
+IMPLEMENT_STANDARD_RTTIEXT(_pyNumberOfSegmentsHyp,_pyHypothesis);
+IMPLEMENT_STANDARD_RTTIEXT(_pyLayerDistributionHypo,_pyHypothesis);
+IMPLEMENT_STANDARD_RTTIEXT(_pySegmentLengthAroundVertexHyp,_pyHypothesis);
using namespace std;
using SMESH::TPythonDump;
/*!
* \brief Container of commands into which the initial script is split.
- * It also contains data coresponding to SMESH_Gen contents
+ * It also contains data corresponding to SMESH_Gen contents
*/
static Handle(_pyGen) theGen;
// - FT_BelongToMeshGroup = 22
// v 8.1.0: FT_Undefined == 48, new items:
// - FT_NodeConnectivityNumber= 22
+ // v 8.5.0: FT_Undefined == 49, new items:
+ // - FT_Deflection2D = 22
//
// It's necessary to continue recording this history and to fill
// undef2newItems (see below) accordingly.
undef2newItems[ 46 ].push_back( 39 );
undef2newItems[ 47 ].push_back( 22 );
undef2newItems[ 48 ].push_back( 22 );
+ undef2newItems[ 49 ].push_back( 22 );
ASSERT( undef2newItems.rbegin()->first == SMESH::FT_Undefined );
}
//================================================================================
/*!
* \brief Convert a command using a specific converter
- * \param theCommand - the command to convert
+ * \param theCommand - the command to convert
*/
//================================================================================
aCommand->GetString() += tmpCmd.GetString();
}
// IMP issue 0021014
- // set GetCriterion(elementType,CritType,Compare,Treshold,UnaryOp,BinaryOp,Tolerance)
- // 1 2 3 4 5 6 7
+ // set GetCriterion(elementType,CritType,Compare,Threshold,UnaryOp,BinaryOp,Tolerance)
+ // 1 2 3 4 5 6 7
// instead of "SMESH.Filter.Criterion(
// Type,Compare,Threshold,ThresholdStr,ThresholdID,UnaryOp,BinaryOp,Tolerance,TypeOfElement,Precision)
// 1 2 3 4 5 6 7 8 9 10
"Entity_Polygon", "Entity_Quad_Polygon", "Entity_Tetra", "Entity_Quad_Tetra",
"Entity_Pyramid", "Entity_Quad_Pyramid",
"Entity_Hexa", "Entity_Quad_Hexa", "Entity_TriQuad_Hexa",
- "Entity_Penta", "Entity_Quad_Penta", "Entity_Hexagonal_Prism",
+ "Entity_Penta", "Entity_Quad_Penta", "Entity_BiQuad_Penta", "Entity_Hexagonal_Prism",
"Entity_Polyhedra", "Entity_Quad_Polyhedra", "Entity_Ball" };
if ( -1 < iGeom && iGeom < nbTypes )
Threshold = SMESH + types[ iGeom ];
//================================================================================
/*!
* \brief Convert the command or remember it for later conversion
- * \param theCommand - The python command calling a method of SMESH_Gen
+ * \param theCommand - The python command calling a method of SMESH_Gen
*/
//================================================================================
//================================================================================
/*!
* \brief Add access method to mesh that is an argument
- * \param theCmd - command to add access method
- * \retval bool - true if added
+ * \param theCmd - command to add access method
+ * \retval bool - true if added
*/
//================================================================================
//================================================================================
/*!
* \brief Add access method to algo that is an object or an argument
- * \param theCmd - command to add access method
- * \retval bool - true if added
+ * \param theCmd - command to add access method
+ * \retval bool - true if added
*/
//================================================================================
//================================================================================
/*!
* \brief Find hypothesis by ID (entry)
- * \param theHypID - The hypothesis ID
- * \retval Handle(_pyHypothesis) - The found hypothesis
+ * \param theHypID - The hypothesis ID
+ * \retval Handle(_pyHypothesis) - The found hypothesis
*/
//================================================================================
//================================================================================
/*!
* \brief Find algorithm able to create a hypothesis
- * \param theGeom - The shape ID the algorithm was created on
- * \param theMesh - The mesh ID that created the algorithm
- * \param theHypothesis - The hypothesis the algorithm should be able to create
- * \retval Handle(_pyHypothesis) - The found algo
+ * \param theGeom - The shape ID the algorithm was created on
+ * \param theMesh - The mesh ID that created the algorithm
+ * \param theHypothesis - The hypothesis the algorithm should be able to create
+ * \retval Handle(_pyHypothesis) - The found algo
*/
//================================================================================
//================================================================================
/*!
* \brief Find subMesh by ID (entry)
- * \param theSubMeshID - The subMesh ID
- * \retval Handle(_pySubMesh) - The found subMesh
+ * \param theSubMeshID - The subMesh ID
+ * \retval Handle(_pySubMesh) - The found subMesh
*/
//================================================================================
//================================================================================
/*!
* \brief Change order of commands in the script
- * \param theCmd1 - One command
- * \param theCmd2 - Another command
+ * \param theCmd1 - One command
+ * \param theCmd2 - Another command
*/
//================================================================================
int nb1 = theCmd1->GetOrderNb();
theCmd1->SetOrderNb( theCmd2->GetOrderNb() );
theCmd2->SetOrderNb( nb1 );
-// cout << "BECOME " << theCmd1->GetOrderNb() << "\t" << theCmd1->GetString() << endl
-// << "BECOME " << theCmd2->GetOrderNb() << "\t" << theCmd2->GetString() << endl << endl;
+ // cout << "BECOME " << theCmd1->GetOrderNb() << "\t" << theCmd1->GetString() << endl
+ // << "BECOME " << theCmd2->GetOrderNb() << "\t" << theCmd2->GetString() << endl << endl;
}
//================================================================================
/*!
* \brief Set one command after the other
- * \param theCmd - Command to move
- * \param theAfterCmd - Command ater which to insert the first one
+ * \param theCmd - Command to move
+ * \param theAfterCmd - Command ater which to insert the first one
*/
//================================================================================
//================================================================================
/*!
* \brief Set one command before the other
- * \param theCmd - Command to move
- * \param theBeforeCmd - Command before which to insert the first one
+ * \param theCmd - Command to move
+ * \param theBeforeCmd - Command before which to insert the first one
*/
//================================================================================
//================================================================================
/*!
* \brief Set one command before or after the other
- * \param theCmd - Command to move
- * \param theOtherCmd - Command ater or before which to insert the first one
+ * \param theCmd - Command to move
+ * \param theOtherCmd - Command ater or before which to insert the first one
*/
//================================================================================
// void _pyGen::addFilterUser( Handle(_pyCommand)& theCommand, const Handle(_pyObject)& user )
// {
- // No more needed after adding _pyObject::myArgCommands
+// No more needed after adding _pyObject::myArgCommands
// const char filterPrefix[] = "aFilter0x";
// if ( theCommand->GetString().Search( filterPrefix ) < 1 )
//================================================================================
/*!
* \brief Set command be last in list of commands
- * \param theCmd - Command to be last
+ * \param theCmd - Command to be last
*/
//================================================================================
//================================================================================
/*!
* \brief Set method to access to object wrapped with python class
- * \param theID - The wrapped object entry
- * \param theMethod - The accessor method
+ * \param theID - The wrapped object entry
+ * \param theMethod - The accessor method
*/
//================================================================================
//================================================================================
/*!
* \brief Generated new ID for object and assign with existing name
- * \param theID - ID of existing object
+ * \param theID - ID of existing object
*/
//================================================================================
}
else if ( theObj->IsKind( STANDARD_TYPE( _pyMeshEditor ))) {
add = myMeshEditors.insert( make_pair( theObj->GetID(),
- Handle(_pyMeshEditor)::DownCast( theObj ))).second;
+ Handle(_pyMeshEditor)::DownCast( theObj ))).second;
}
else {
add = myObjects.insert( make_pair( theObj->GetID(), theObj )).second;
//================================================================================
/*!
* \brief Convert an IDL API command of SMESH::SMESH_Mesh to a method call of python Mesh
- * \param theCommand - Engine method called for this mesh
+ * \param theCommand - Engine method called for this mesh
*/
//================================================================================
"ExtrusionAlongPathX","ExtrusionAlongPathObject1D","ExtrusionAlongPathObject2D",
"ExtrusionSweepObjects","RotationSweepObjects","ExtrusionAlongPathObjects",
"Mirror","MirrorObject","Translate","TranslateObject","Rotate","RotateObject",
- "FindCoincidentNodes","MergeNodes","FindEqualElements",
+ "FindCoincidentNodes","MergeNodes","FindEqualElements","FillHole",
"MergeElements","MergeEqualElements","SewFreeBorders","SewConformFreeBorders",
"FindCoincidentFreeBorders", "SewCoincidentFreeBorders",
"SewBorderToSide","SewSideElements","ChangeElemNodes","GetLastCreatedNodes",
//================================================================================
/*!
* \brief _pyHypothesis constructor
- * \param theCreationCmd -
+ * \param theCreationCmd -
*/
//================================================================================
//================================================================================
/*!
* \brief Creates algorithm or hypothesis
- * \param theCreationCmd - The engine command creating a hypothesis
- * \retval Handle(_pyHypothesis) - Result _pyHypothesis
+ * \param theCreationCmd - The engine command creating a hypothesis
+ * \retval Handle(_pyHypothesis) - Result _pyHypothesis
*/
//================================================================================
//================================================================================
/*!
* \brief Convert the command adding a hypothesis to mesh into a smesh command
- * \param theCmd - The command like mesh.AddHypothesis( geom, hypo )
- * \param theAlgo - The algo that can create this hypo
- * \retval bool - false if the command can't be converted
+ * \param theCmd - The command like mesh.AddHypothesis( geom, hypo )
+ * \param theAlgo - The algo that can create this hypo
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
//================================================================================
/*!
* \brief Remember hypothesis parameter values
- * \param theCommand - The called hypothesis method
+ * \param theCommand - The called hypothesis method
*/
//================================================================================
//================================================================================
/*!
* \brief Remember hypothesis parameter values
- * \param theCommand - The called hypothesis method
+ * \param theCommand - The called hypothesis method
*/
//================================================================================
{
CreationMethod& crMethod = type2meth->second;
while ( (int) crMethod.myArgs.size() < i+1 )
- crMethod.myArgs.push_back( "[]" );
- crMethod.myArgs[ i ] = theCommand->GetArg( 1 ); // arg value
+ crMethod.myArgs.push_back( "[]" );
+ crMethod.myArgs[ i ] = theCommand->GetArg( 1 ); // arg value
}
myArgCommands.push_back( theCommand );
}
//================================================================================
/*!
* \brief Convert methods of 1D hypotheses to my own methods
- * \param theCommand - The called hypothesis method
+ * \param theCommand - The called hypothesis method
*/
//================================================================================
//================================================================================
/*!
* \brief
- * \param theAdditionCmd - command to be converted
- * \param theMesh - mesh instance
- * \retval bool - status
+ * \param theAdditionCmd - command to be converted
+ * \param theMesh - mesh instance
+ * \retval bool - status
*/
//================================================================================
//================================================================================
/*!
* \brief additionally to Addition2Creation, clears SetDistrType() command
- * \param theCmd - AddHypothesis() command
- * \param theMesh - mesh to which a hypothesis is added
- * \retval bool - conversion result
+ * \param theCmd - AddHypothesis() command
+ * \param theMesh - mesh to which a hypothesis is added
+ * \retval bool - conversion result
*/
//================================================================================
/*!
* \brief Convert the command adding "SegmentLengthAroundVertex" to mesh
* into regular1D.LengthNearVertex( length, vertex )
- * \param theCmd - The command like mesh.AddHypothesis( vertex, SegmentLengthAroundVertex )
- * \param theMesh - The mesh needing this hypo
- * \retval bool - false if the command can't be converted
+ * \param theCmd - The command like mesh.AddHypothesis( vertex, SegmentLengthAroundVertex )
+ * \param theMesh - The mesh needing this hypo
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
//================================================================================
/*!
* \brief _pyAlgorithm constructor
- * \param theCreationCmd - The command like "algo = smeshgen.CreateHypothesis(type,lib)"
+ * \param theCreationCmd - The command like "algo = smeshgen.CreateHypothesis(type,lib)"
*/
//================================================================================
//================================================================================
/*!
* \brief Convert the command adding an algorithm to mesh
- * \param theCmd - The command like mesh.AddHypothesis( geom, algo )
- * \param theMesh - The mesh needing this algo
- * \retval bool - false if the command can't be converted
+ * \param theCmd - The command like mesh.AddHypothesis( geom, algo )
+ * \param theMesh - The mesh needing this algo
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
//================================================================================
/*!
* \brief Return starting position of a part of python command
- * \param thePartIndex - The index of command part
- * \retval int - Part position
+ * \param thePartIndex - The index of command part
+ * \retval int - Part position
*/
//================================================================================
//================================================================================
/*!
* \brief Store starting position of a part of python command
- * \param thePartIndex - The index of command part
- * \param thePosition - Part position
+ * \param thePartIndex - The index of command part
+ * \param thePosition - Part position
*/
//================================================================================
//================================================================================
/*!
* \brief Returns whitespace symbols at the line beginning
- * \retval TCollection_AsciiString - result
+ * \retval TCollection_AsciiString - result
*/
//================================================================================
//================================================================================
/*!
* \brief Return substring of python command looking like ResultValue = Obj.Meth()
- * \retval const TCollection_AsciiString & - ResultValue substring
+ * \retval const TCollection_AsciiString & - ResultValue substring
*/
//================================================================================
//================================================================================
/*!
* \brief Return substring of python command looking like ResVal = Obj.Method()
- * \retval const TCollection_AsciiString & - Method substring
+ * \retval const TCollection_AsciiString & - Method substring
*/
//================================================================================
//================================================================================
/*!
* \brief Return substring of python command looking like ResVal = Obj.Meth(Arg1,...)
- * \retval const TCollection_AsciiString & - Arg<index> substring
+ * \retval const TCollection_AsciiString & - Arg<index> substring
*/
//================================================================================
//================================================================================
/*!
* \brief Check if char is a word part
- * \param c - The character to check
- * \retval bool - The check result
+ * \param c - The character to check
+ * \retval bool - The check result
*/
//================================================================================
//================================================================================
/*!
* \brief Looks for a word in the string and returns word's beginning
- * \param theString - The input string
- * \param theStartPos - The position to start the search, returning word's beginning
- * \param theForward - The search direction
- * \retval TCollection_AsciiString - The found word
+ * \param theString - The input string
+ * \param theStartPos - The position to start the search, returning word's beginning
+ * \param theForward - The search direction
+ * \retval TCollection_AsciiString - The found word
*/
//================================================================================
//================================================================================
/*!
* \brief Look for position where not space char is
- * \param theString - The string
- * \param thePos - The position to search from and which returns result
- * \retval bool - false if there are only space after thePos in theString
+ * \param theString - The string
+ * \param thePos - The position to search from and which returns result
+ * \retval bool - false if there are only space after thePos in theString
*/
//================================================================================
//================================================================================
/*!
* \brief Modify a part of the command
- * \param thePartIndex - The index of the part
- * \param thePart - The new part string
- * \param theOldPart - The old part
+ * \param thePartIndex - The index of the part
+ * \param thePart - The new part string
+ * \param theOldPart - The old part
*/
//================================================================================
void _pyCommand::SetPart(int thePartIndex, const TCollection_AsciiString& thePart,
- TCollection_AsciiString& theOldPart)
+ TCollection_AsciiString& theOldPart)
{
int pos = GetBegPos( thePartIndex );
if ( pos <= Length() && theOldPart != thePart)
//================================================================================
/*!
* \brief Set agrument
- * \param index - The argument index, it counts from 1
- * \param theArg - The argument string
+ * \param index - The argument index, it counts from 1
+ * \param theArg - The argument string
*/
//================================================================================
//================================================================================
/*!
* \brief Insert accessor method after theObjectID
- * \param theObjectID - id of the accessed object
- * \param theAcsMethod - name of the method giving access to the object
- * \retval bool - false if theObjectID is not found in the command string
+ * \param theObjectID - id of the accessed object
+ * \param theAcsMethod - name of the method giving access to the object
+ * \retval bool - false if theObjectID is not found in the command string
*/
//================================================================================
//================================================================================
/*!
* \brief Return method name giving access to an interaface object wrapped by python class
- * \retval const char* - method name
+ * \retval const char* - method name
*/
//================================================================================
bool _pySubMesh::CanBeArgOfMethod(const _AString& theMethodName)
{
return false;
-// // names of all methods where a sub-mesh can be used as argument
-// static TStringSet methods;
-// if ( methods.empty() ) {
-// const char * names[] = {
-// // methods of SMESH_Gen
-// "CopyMesh",
-// // methods of SMESH_Group
-// "AddFrom",
-// // methods of SMESH_Measurements
-// "MinDistance",
-// // methods of SMESH_Mesh
-// "ExportPartToMED","ExportCGNS","ExportPartToDAT","ExportPartToUNV","ExportPartToSTL",
-// "RemoveSubMesh",
-// // methods of SMESH_MeshEditor
-// "ReorientObject","Reorient2D","TriToQuadObject","QuadToTriObject","SplitQuadObject",
-// "SplitVolumesIntoTetra","SmoothObject","SmoothParametricObject","ConvertFromQuadraticObject",
-// "RotationSweepObject","RotationSweepObjectMakeGroups","RotationSweepObject1D",
-// "RotationSweepObject1DMakeGroups","RotationSweepObject2D","RotationSweepObject2DMakeGroups",
-// "ExtrusionSweepObject","ExtrusionSweepObjectMakeGroups","ExtrusionSweepObject0D",
-// "ExtrusionSweepObject0DMakeGroups","ExtrusionSweepObject1D","ExtrusionSweepObject2D",
-// "ExtrusionSweepObject1DMakeGroups","ExtrusionSweepObject2DMakeGroups",
-// "ExtrusionAlongPathObjX","ExtrusionAlongPathObject","ExtrusionAlongPathObjectMakeGroups",
-// "ExtrusionAlongPathObject1D","ExtrusionAlongPathObject1DMakeGroups",
-// "ExtrusionAlongPathObject2D","ExtrusionAlongPathObject2DMakeGroups","MirrorObject",
-// "MirrorObjectMakeGroups","MirrorObjectMakeMesh","TranslateObject","Scale",
-// "TranslateObjectMakeGroups","TranslateObjectMakeMesh","ScaleMakeGroups","ScaleMakeMesh",
-// "RotateObject","RotateObjectMakeGroups","RotateObjectMakeMesh","FindCoincidentNodesOnPart",
-// "FindCoincidentNodesOnPartBut","FindEqualElements","FindAmongElementsByPoint",
-// "MakeBoundaryMesh","Create0DElementsOnAllNodes",
-// "" }; // <- mark of end
-// methods.Insert( names );
-// }
-// return methods.Contains( theMethodName );
+ // names of all methods where a sub-mesh can be used as argument
+ // static TStringSet methods;
+ // if ( methods.empty() ) {
+ // const char * names[] = {
+ // // methods of SMESH_Gen
+ // "CopyMesh",
+ // // methods of SMESH_Group
+ // "AddFrom",
+ // // methods of SMESH_Measurements
+ // "MinDistance",
+ // // methods of SMESH_Mesh
+ // "ExportPartToMED","ExportCGNS","ExportPartToDAT","ExportPartToUNV","ExportPartToSTL",
+ // "RemoveSubMesh",
+ // // methods of SMESH_MeshEditor
+ // "ReorientObject","Reorient2D","TriToQuadObject","QuadToTriObject","SplitQuadObject",
+ // "SplitVolumesIntoTetra","SmoothObject","SmoothParametricObject","ConvertFromQuadraticObject",
+ // "RotationSweepObject","RotationSweepObjectMakeGroups","RotationSweepObject1D",
+ // "RotationSweepObject1DMakeGroups","RotationSweepObject2D","RotationSweepObject2DMakeGroups",
+ // "ExtrusionSweepObject","ExtrusionSweepObjectMakeGroups","ExtrusionSweepObject0D",
+ // "ExtrusionSweepObject0DMakeGroups","ExtrusionSweepObject1D","ExtrusionSweepObject2D",
+ // "ExtrusionSweepObject1DMakeGroups","ExtrusionSweepObject2DMakeGroups",
+ // "ExtrusionAlongPathObjX","ExtrusionAlongPathObject","ExtrusionAlongPathObjectMakeGroups",
+ // "ExtrusionAlongPathObject1D","ExtrusionAlongPathObject1DMakeGroups",
+ // "ExtrusionAlongPathObject2D","ExtrusionAlongPathObject2DMakeGroups","MirrorObject",
+ // "MirrorObjectMakeGroups","MirrorObjectMakeMesh","TranslateObject","Scale",
+ // "TranslateObjectMakeGroups","TranslateObjectMakeMesh","ScaleMakeGroups","ScaleMakeMesh",
+ // "RotateObject","RotateObjectMakeGroups","RotateObjectMakeMesh","FindCoincidentNodesOnPart",
+ // "FindCoincidentNodesOnPartBut","FindEqualElements","FindAmongElementsByPoint",
+ // "MakeBoundaryMesh","Create0DElementsOnAllNodes",
+ // "" }; // <- mark of end
+ // methods.Insert( names );
+ // }
+ // return methods.Contains( theMethodName );
}
//================================================================================
//}
//else {
// ------------------------->>>>> GroupOnGeom( geom, name, typ )
- _pyID type = theCreationCmd->GetArg( 1 );
- _pyID name = theCreationCmd->GetArg( 2 );
- theCreationCmd->SetMethod( "GroupOnGeom" );
- theCreationCmd->RemoveArgs();
- theCreationCmd->SetArg( 1, geom );
- theCreationCmd->SetArg( 2, name );
- theCreationCmd->SetArg( 3, type );
+ _pyID type = theCreationCmd->GetArg( 1 );
+ _pyID name = theCreationCmd->GetArg( 2 );
+ theCreationCmd->SetMethod( "GroupOnGeom" );
+ theCreationCmd->RemoveArgs();
+ theCreationCmd->SetArg( 1, geom );
+ theCreationCmd->SetArg( 2, name );
+ theCreationCmd->SetArg( 3, type );
//}
}
else if ( method == "CreateGroupFromFilter" )
