-// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#include <unistd.h>
#endif
-
-IMPLEMENT_STANDARD_HANDLE (_pyObject ,Standard_Transient);
-IMPLEMENT_STANDARD_HANDLE (_pyCommand ,Standard_Transient);
-IMPLEMENT_STANDARD_HANDLE (_pyHypothesisReader,Standard_Transient);
-IMPLEMENT_STANDARD_HANDLE (_pyGen ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyMesh ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pySubMesh ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyMeshEditor ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyHypothesis ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pySelfEraser ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyGroup ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyFilter ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyAlgorithm ,_pyHypothesis);
-IMPLEMENT_STANDARD_HANDLE (_pyComplexParamHypo,_pyHypothesis);
-IMPLEMENT_STANDARD_HANDLE (_pyNumberOfSegmentsHyp,_pyHypothesis);
-
IMPLEMENT_STANDARD_RTTIEXT(_pyObject ,Standard_Transient);
IMPLEMENT_STANDARD_RTTIEXT(_pyCommand ,Standard_Transient);
IMPLEMENT_STANDARD_RTTIEXT(_pyHypothesisReader,Standard_Transient);
/*!
* \brief Container of commands into which the initial script is split.
- * It also contains data coresponding to SMESH_Gen contents
+ * It also contains data corresponding to SMESH_Gen contents
*/
static Handle(_pyGen) theGen;
// - FT_EntityType = 36
// v 7.3.0: FT_Undefined == 46, new items:
// - FT_ConnectedElements = 39
+ // v 7.6.0: FT_Undefined == 47, new items:
+ // - FT_BelongToMeshGroup = 22
+ // v 8.1.0: FT_Undefined == 48, new items:
+ // - FT_NodeConnectivityNumber= 22
+ // v 8.5.0: FT_Undefined == 49, new items:
+ // - FT_Deflection2D = 22
//
// It's necessary to continue recording this history and to fill
// undef2newItems (see below) accordingly.
undef2newItems[ 44 ].push_back( 37 );
undef2newItems[ 45 ].push_back( 36 );
undef2newItems[ 46 ].push_back( 39 );
+ undef2newItems[ 47 ].push_back( 22 );
+ undef2newItems[ 48 ].push_back( 22 );
+ undef2newItems[ 49 ].push_back( 22 );
ASSERT( undef2newItems.rbegin()->first == SMESH::FT_Undefined );
}
"ExtrusionSweepObjectMakeGroups","ExtrusionSweepObject0D",
"ExtrusionSweepObject1D","ExtrusionSweepObject1DMakeGroups",
"ExtrusionSweepObject2D","ExtrusionSweepObject2DMakeGroups",
+ "ExtrusionSweepObjects","RotationSweepObjects","ExtrusionAlongPathObjects",
"Translate","TranslateMakeGroups","TranslateMakeMesh",
"TranslateObject","TranslateObjectMakeGroups", "TranslateObjectMakeMesh",
"ExtrusionAlongPathX","ExtrusionAlongPathObjX","SplitHexahedraIntoPrisms"
"ExportCGNS","ExportGMF",
"Create0DElementsOnAllNodes","Reorient2D","QuadTo4Tri",
"ScaleMakeGroups","Scale","ScaleMakeMesh",
- "FindCoincidentNodesOnPartBut","DoubleElements"
+ "FindCoincidentNodesOnPartBut","DoubleElements",
+ "ExtrusionSweepObjects","RotationSweepObjects","ExtrusionAlongPathObjects"
,"" }; // <- mark of the end
methodsAcceptingList.Insert( methodNames );
}
* \param theRemovedObjIDs - entries of objects whose created commands were removed
* \param theHistoricalDump - true means to keep all commands, false means
* to exclude commands relating to objects removed from study
- * \retval TCollection_AsciiString - Convertion result
+ * \retval TCollection_AsciiString - Conversion result
*/
//================================================================================
MESSAGE_BEGIN ( std::endl << " ######## RESULT ######## " << std::endl<< std::endl );
#endif
- // clean commmands of removed objects depending on myIsPublished flag
+ // clean commands of removed objects depending on myIsPublished flag
theGen->ClearCommands();
// reorder commands after conversion
//================================================================================
/*!
* \brief Convert a command using a specific converter
- * \param theCommand - the command to convert
+ * \param theCommand - the command to convert
*/
//================================================================================
{
//id_mesh->second->AddProcessedCmd( aCommand );
+ // Wrap Export*() into try-except
+ if ( aCommand->MethodStartsFrom("Export"))
+ {
+ _AString tab = "\t";
+ _AString indent = aCommand->GetIndentation();
+ _AString tryStr = indent + "try:";
+ _AString newCmd = indent + tab + ( aCommand->GetString().ToCString() + indent.Length() );
+ _AString pasCmd = indent + tab + "pass"; // to keep valid if newCmd is erased
+ _AString excStr = indent + "except:";
+ _AString msgStr = indent + "\tprint '"; msgStr += method + "() failed. Invalid file name?'";
+
+ myCommands.insert( --myCommands.end(), new _pyCommand( tryStr, myNbCommands ));
+ aCommand->Clear();
+ aCommand->GetString() = newCmd;
+ aCommand->SetOrderNb( ++myNbCommands );
+ myCommands.push_back( new _pyCommand( pasCmd, ++myNbCommands ));
+ myCommands.push_back( new _pyCommand( excStr, ++myNbCommands ));
+ myCommands.push_back( new _pyCommand( msgStr, ++myNbCommands ));
+ }
// check for mesh editor object
if ( aCommand->GetMethod() == "GetMeshEditor" ) { // MeshEditor creation
_pyID editorID = aCommand->GetResultValue();
else if ( method == "MakeBoundaryElements")
meshID = aCommand->GetResultValue(2);
- if ( method.Search("MakeGroups") != -1 ||
- method == "ExtrusionAlongPathX" ||
- method == "ExtrusionAlongPathObjX" ||
- method == "DoubleNodeGroupNew" ||
- method == "DoubleNodeGroupsNew" ||
- method == "DoubleNodeElemGroupNew" ||
- method == "DoubleNodeElemGroupsNew"||
- method == "DoubleNodeElemGroup2New"||
- method == "DoubleNodeElemGroups2New"
+ if ( method.Search("MakeGroups") != -1 ||
+ method == "ExtrusionAlongPathX" ||
+ method == "ExtrusionAlongPathObjX" ||
+ method == "DoubleNodeGroupNew" ||
+ method == "DoubleNodeGroupsNew" ||
+ method == "DoubleNodeElemGroupNew" ||
+ method == "DoubleNodeElemGroupsNew" ||
+ method == "DoubleNodeElemGroup2New" ||
+ method == "DoubleNodeElemGroups2New" ||
+ method == "AffectedElemGroupsInRegion"
)
groups = aCommand->GetResultValue();
else if ( method == "MakeBoundaryMesh" )
aCommand->GetString() += tmpCmd.GetString();
}
// IMP issue 0021014
- // set GetCriterion(elementType,CritType,Compare,Treshold,UnaryOp,BinaryOp,Tolerance)
- // 1 2 3 4 5 6 7
+ // set GetCriterion(elementType,CritType,Compare,Threshold,UnaryOp,BinaryOp,Tolerance)
+ // 1 2 3 4 5 6 7
// instead of "SMESH.Filter.Criterion(
// Type,Compare,Threshold,ThresholdStr,ThresholdID,UnaryOp,BinaryOp,Tolerance,TypeOfElement,Precision)
// 1 2 3 4 5 6 7 8 9 10
if ( Type == "SMESH.FT_ElemGeomType" )
{
// set SMESH.GeometryType instead of a numerical Threshold
- const int nbTypes = SMESH::Geom_BALL+1;
- const char* types[nbTypes] = {
+ const int nbTypes = SMESH::Geom_LAST;
+ const char* types[] = {
"Geom_POINT", "Geom_EDGE", "Geom_TRIANGLE", "Geom_QUADRANGLE", "Geom_POLYGON",
"Geom_TETRA", "Geom_PYRAMID", "Geom_HEXA", "Geom_PENTA", "Geom_HEXAGONAL_PRISM",
"Geom_POLYHEDRA", "Geom_BALL" };
if ( -1 < iGeom && iGeom < nbTypes )
Threshold = SMESH + types[ iGeom ];
+#ifdef _DEBUG_
+ // is types complete? (compilation failure mains that enum GeometryType changed)
+ int _asrt[( sizeof(types) / sizeof(const char*) == nbTypes ) ? 2 : -1 ]; _asrt[0]=_asrt[1];
+#endif
}
if (Type == "SMESH.FT_EntityType")
{
// set SMESH.EntityType instead of a numerical Threshold
- const int nbTypes = SMESH::Entity_Ball+1;
- const char* types[nbTypes] = {
+ const int nbTypes = SMESH::Entity_Last;
+ const char* types[] = {
"Entity_Node", "Entity_0D", "Entity_Edge", "Entity_Quad_Edge",
"Entity_Triangle", "Entity_Quad_Triangle", "Entity_BiQuad_Triangle",
"Entity_Quadrangle", "Entity_Quad_Quadrangle", "Entity_BiQuad_Quadrangle",
"Entity_Polygon", "Entity_Quad_Polygon", "Entity_Tetra", "Entity_Quad_Tetra",
"Entity_Pyramid", "Entity_Quad_Pyramid",
"Entity_Hexa", "Entity_Quad_Hexa", "Entity_TriQuad_Hexa",
- "Entity_Penta", "Entity_Quad_Penta", "Entity_Hexagonal_Prism",
+ "Entity_Penta", "Entity_Quad_Penta", "Entity_BiQuad_Penta", "Entity_Hexagonal_Prism",
"Entity_Polyhedra", "Entity_Quad_Polyhedra", "Entity_Ball" };
if ( -1 < iGeom && iGeom < nbTypes )
Threshold = SMESH + types[ iGeom ];
+#ifdef _DEBUG_
+ // is 'types' complete? (compilation failure mains that enum EntityType changed)
+ int _asrt[( sizeof(types) / sizeof(const char*) == nbTypes ) ? 2 : -1 ]; _asrt[0]=_asrt[1];
+#endif
}
}
if ( ThresholdID.Length() != 2 ) // neither '' nor ""
//================================================================================
/*!
* \brief Convert the command or remember it for later conversion
- * \param theCommand - The python command calling a method of SMESH_Gen
+ * \param theCommand - The python command calling a method of SMESH_Gen
*/
//================================================================================
//================================================================================
/*!
- * \brief Clean commmands of removed objects depending on myIsPublished flag
+ * \brief Clean commands of removed objects depending on myIsPublished flag
*/
//================================================================================
//================================================================================
/*!
* \brief Add access method to mesh that is an argument
- * \param theCmd - command to add access method
- * \retval bool - true if added
+ * \param theCmd - command to add access method
+ * \retval bool - true if added
*/
//================================================================================
//================================================================================
/*!
* \brief Add access method to algo that is an object or an argument
- * \param theCmd - command to add access method
- * \retval bool - true if added
+ * \param theCmd - command to add access method
+ * \retval bool - true if added
*/
//================================================================================
//================================================================================
/*!
* \brief Find hypothesis by ID (entry)
- * \param theHypID - The hypothesis ID
- * \retval Handle(_pyHypothesis) - The found hypothesis
+ * \param theHypID - The hypothesis ID
+ * \retval Handle(_pyHypothesis) - The found hypothesis
*/
//================================================================================
//================================================================================
/*!
* \brief Find algorithm able to create a hypothesis
- * \param theGeom - The shape ID the algorithm was created on
- * \param theMesh - The mesh ID that created the algorithm
- * \param theHypothesis - The hypothesis the algorithm sould be able to create
- * \retval Handle(_pyHypothesis) - The found algo
+ * \param theGeom - The shape ID the algorithm was created on
+ * \param theMesh - The mesh ID that created the algorithm
+ * \param theHypothesis - The hypothesis the algorithm should be able to create
+ * \retval Handle(_pyHypothesis) - The found algo
*/
//================================================================================
//================================================================================
/*!
* \brief Find subMesh by ID (entry)
- * \param theSubMeshID - The subMesh ID
- * \retval Handle(_pySubMesh) - The found subMesh
+ * \param theSubMeshID - The subMesh ID
+ * \retval Handle(_pySubMesh) - The found subMesh
*/
//================================================================================
//================================================================================
/*!
* \brief Change order of commands in the script
- * \param theCmd1 - One command
- * \param theCmd2 - Another command
+ * \param theCmd1 - One command
+ * \param theCmd2 - Another command
*/
//================================================================================
int nb1 = theCmd1->GetOrderNb();
theCmd1->SetOrderNb( theCmd2->GetOrderNb() );
theCmd2->SetOrderNb( nb1 );
-// cout << "BECOME " << theCmd1->GetOrderNb() << "\t" << theCmd1->GetString() << endl
-// << "BECOME " << theCmd2->GetOrderNb() << "\t" << theCmd2->GetString() << endl << endl;
+ // cout << "BECOME " << theCmd1->GetOrderNb() << "\t" << theCmd1->GetString() << endl
+ // << "BECOME " << theCmd2->GetOrderNb() << "\t" << theCmd2->GetString() << endl << endl;
}
//================================================================================
/*!
* \brief Set one command after the other
- * \param theCmd - Command to move
- * \param theAfterCmd - Command ater which to insert the first one
+ * \param theCmd - Command to move
+ * \param theAfterCmd - Command ater which to insert the first one
*/
//================================================================================
//================================================================================
/*!
* \brief Set one command before the other
- * \param theCmd - Command to move
- * \param theBeforeCmd - Command before which to insert the first one
+ * \param theCmd - Command to move
+ * \param theBeforeCmd - Command before which to insert the first one
*/
//================================================================================
//================================================================================
/*!
* \brief Set one command before or after the other
- * \param theCmd - Command to move
- * \param theOtherCmd - Command ater or before which to insert the first one
+ * \param theCmd - Command to move
+ * \param theOtherCmd - Command ater or before which to insert the first one
*/
//================================================================================
// void _pyGen::addFilterUser( Handle(_pyCommand)& theCommand, const Handle(_pyObject)& user )
// {
- // No more needed after adding _pyObject::myArgCommands
+// No more needed after adding _pyObject::myArgCommands
// const char filterPrefix[] = "aFilter0x";
// if ( theCommand->GetString().Search( filterPrefix ) < 1 )
//================================================================================
/*!
* \brief Set command be last in list of commands
- * \param theCmd - Command to be last
+ * \param theCmd - Command to be last
*/
//================================================================================
//================================================================================
/*!
* \brief Set method to access to object wrapped with python class
- * \param theID - The wrapped object entry
- * \param theMethod - The accessor method
+ * \param theID - The wrapped object entry
+ * \param theMethod - The accessor method
*/
//================================================================================
//================================================================================
/*!
* \brief Generated new ID for object and assign with existing name
- * \param theID - ID of existing object
+ * \param theID - ID of existing object
*/
//================================================================================
}
while ( myObjectNames.IsBound( aNewID ) );
- myObjectNames.Bind( aNewID, myObjectNames.IsBound( theID )
- ? (myObjectNames.Find( theID ) + _pyID( "_" ) + _pyID( index-1 ))
- : _pyID( "A" ) + aNewID );
+ if ( myObjectNames.IsBound( theID ) )
+ myObjectNames.Bind( aNewID, ( myObjectNames.Find( theID ) + _pyID( "_" ) + _pyID( index-1 ) ) );
+ else
+ myObjectNames.Bind( aNewID, ( _pyID( "A" ) + aNewID ) );
return aNewID;
}
}
else if ( theObj->IsKind( STANDARD_TYPE( _pyMeshEditor ))) {
add = myMeshEditors.insert( make_pair( theObj->GetID(),
- Handle(_pyMeshEditor)::DownCast( theObj ))).second;
+ Handle(_pyMeshEditor)::DownCast( theObj ))).second;
}
else {
add = myObjects.insert( make_pair( theObj->GetID(), theObj )).second;
return;
const bool isHyp = theObj->IsKind( STANDARD_TYPE( _pyHypothesis ));
- Handle(_pyObject) existing =
- isHyp ? FindHyp( theObj->GetID() ) : FindObject( theObj->GetID() );
+ Handle(_pyObject) existing;
+ if( isHyp )
+ existing = FindHyp( theObj->GetID() );
+ else
+ existing = FindObject( theObj->GetID() );
if ( !existing.IsNull() && existing != theObj )
{
existing->SetRemovedFromStudy( true );
return id_obj->second;
}
{
- map< _pyID, Handle(_pyMesh) >::const_iterator id_obj = myMeshes.find( theObjID );
+ _pyGen* me = const_cast< _pyGen* >( this );
+ map< _pyID, Handle(_pyMesh) >::iterator id_obj = me->myMeshes.find( theObjID );
if ( id_obj != myMeshes.end() )
return id_obj->second;
}
//================================================================================
/*!
* \brief Convert an IDL API command of SMESH::SMESH_Mesh to a method call of python Mesh
- * \param theCommand - Engine method called for this mesh
+ * \param theCommand - Engine method called for this mesh
*/
//================================================================================
}
}
// ----------------------------------------------------------------------
- else if ( method == "GetSubMesh" ) { // collect submeshes of the mesh
+ else if ( method == "GetSubMesh" ) { // collect sub-meshes of the mesh
Handle(_pySubMesh) subMesh = theGen->FindSubMesh( theCommand->GetResultValue() );
if ( !subMesh.IsNull() ) {
subMesh->SetCreator( this );
}
}
// ----------------------------------------------------------------------
+ else if ( method == "GetSubMeshes" ) { // clear as the command does nothing (0023156)
+ theCommand->Clear();
+ }
+ // ----------------------------------------------------------------------
else if ( method == "AddHypothesis" ) { // mesh.AddHypothesis(geom, HYPO )
myAddHypCmds.push_back( theCommand );
// set mesh to hypo
// ----------------------------------------------------------------------
else if ( method == "CreateGroup" ||
method == "CreateGroupFromGEOM" ||
- method == "CreateGroupFromFilter" )
+ method == "CreateGroupFromFilter" ||
+ method == "CreateDimGroup" )
{
Handle(_pyGroup) group = new _pyGroup( theCommand );
myGroups.push_back( group );
TCollection_AsciiString grIDs = theCommand->GetResultValue();
list< _pyID > idList = theCommand->GetStudyEntries( grIDs );
list< _pyID >::iterator grID = idList.begin();
- const int nbGroupsBefore = myGroups.size();
+ const size_t nbGroupsBefore = myGroups.size();
Handle(_pyObject) obj;
for ( ; grID != idList.end(); ++grID )
{
{
addCmd = *cmd;
cmd = addHypCmds.erase( cmd );
- if ( !theGen->IsToKeepAllCommands() && CanClear() ) {
+ if ( !theGen->IsToKeepAllCommands() /*&& CanClear()*/ ) {
addCmd->Clear();
theCommand->Clear();
}
if ( sameMethods.empty() ) {
const char * names[] =
{ "ExportDAT","ExportUNV","ExportSTL","ExportSAUV", "RemoveGroup","RemoveGroupWithContents",
- "GetGroups","UnionGroups","IntersectGroups","CutGroups","GetLog","GetId","ClearLog",
- "GetStudyId","HasDuplicatedGroupNamesMED","GetMEDMesh","NbNodes","NbElements",
+ "GetGroups","UnionGroups","IntersectGroups","CutGroups","CreateDimGroup","GetLog","GetId",
+ "ClearLog","GetStudyId","HasDuplicatedGroupNamesMED","GetMEDMesh","NbNodes","NbElements",
"NbEdges","NbEdgesOfOrder","NbFaces","NbFacesOfOrder","NbTriangles",
"NbTrianglesOfOrder","NbQuadrangles","NbQuadranglesOfOrder","NbPolygons","NbVolumes",
"NbVolumesOfOrder","NbTetras","NbTetrasOfOrder","NbHexas","NbHexasOfOrder",
for ( ; m != fatherMeshes.end(); ++m )
addFatherMesh( *m );
// if ( removedGeom )
- // SetRemovedFromStudy(); // as reffered geometry not in study
+ // SetRemovedFromStudy(); // as referred geometry not in study
}
if ( myGeomNotInStudy )
return;
"ConvertToQuadratic","ConvertFromQuadratic","RenumberNodes","RenumberElements",
"RotationSweep","RotationSweepObject","RotationSweepObject1D","RotationSweepObject2D",
"ExtrusionSweep","AdvancedExtrusion","ExtrusionSweepObject","ExtrusionSweepObject1D",
- "ExtrusionSweepObject2D","ExtrusionAlongPath","ExtrusionAlongPathObject",
+ "ExtrusionByNormal", "ExtrusionSweepObject2D","ExtrusionAlongPath","ExtrusionAlongPathObject",
"ExtrusionAlongPathX","ExtrusionAlongPathObject1D","ExtrusionAlongPathObject2D",
+ "ExtrusionSweepObjects","RotationSweepObjects","ExtrusionAlongPathObjects",
"Mirror","MirrorObject","Translate","TranslateObject","Rotate","RotateObject",
- "FindCoincidentNodes","MergeNodes","FindEqualElements",
+ "FindCoincidentNodes","MergeNodes","FindEqualElements","FillHole",
"MergeElements","MergeEqualElements","SewFreeBorders","SewConformFreeBorders",
+ "FindCoincidentFreeBorders", "SewCoincidentFreeBorders",
"SewBorderToSide","SewSideElements","ChangeElemNodes","GetLastCreatedNodes",
"GetLastCreatedElems",
"MirrorMakeMesh","MirrorObjectMakeMesh","TranslateMakeMesh","TranslateObjectMakeMesh",
"Scale","ScaleMakeMesh","RotateMakeMesh","RotateObjectMakeMesh","MakeBoundaryMesh",
"MakeBoundaryElements", "SplitVolumesIntoTetra","SplitHexahedraIntoPrisms",
"DoubleElements","DoubleNodes","DoubleNode","DoubleNodeGroup","DoubleNodeGroups",
- "DoubleNodeElem","DoubleNodeElemInRegion","DoubleNodeElemGroup",
+ "DoubleNodeElem","DoubleNodeElemInRegion","DoubleNodeElemGroup","AffectedElemGroupsInRegion",
"DoubleNodeElemGroupInRegion","DoubleNodeElemGroups","DoubleNodeElemGroupsInRegion",
"DoubleNodesOnGroupBoundaries","CreateFlatElementsOnFacesGroups","CreateHoleSkin"
,"" }; // <- mark of the end
//================================================================================
/*!
* \brief _pyHypothesis constructor
- * \param theCreationCmd -
+ * \param theCreationCmd -
*/
//================================================================================
//================================================================================
/*!
* \brief Creates algorithm or hypothesis
- * \param theCreationCmd - The engine command creating a hypothesis
- * \retval Handle(_pyHypothesis) - Result _pyHypothesis
+ * \param theCreationCmd - The engine command creating a hypothesis
+ * \retval Handle(_pyHypothesis) - Result _pyHypothesis
*/
//================================================================================
//================================================================================
/*!
* \brief Convert the command adding a hypothesis to mesh into a smesh command
- * \param theCmd - The command like mesh.AddHypothesis( geom, hypo )
- * \param theAlgo - The algo that can create this hypo
- * \retval bool - false if the command cant be converted
+ * \param theCmd - The command like mesh.AddHypothesis( geom, hypo )
+ * \param theAlgo - The algo that can create this hypo
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
//================================================================================
/*!
* \brief Remember hypothesis parameter values
- * \param theCommand - The called hypothesis method
+ * \param theCommand - The called hypothesis method
*/
//================================================================================
myArgCommands.push_back( theCommand );
usedCommand = true;
while ( crMethod.myArgs.size() < i+1 )
- crMethod.myArgs.push_back( "[]" );
+ crMethod.myArgs.push_back( "None" );
crMethod.myArgs[ i ] = theCommand->GetArg( crMethod.myArgNb[i] );
}
}
//================================================================================
/*!
- * \brief clear creation, arg and unkown commands
+ * \brief clear creation, arg and unknown commands
*/
//================================================================================
{
if ( myCurCrMethod )
{
- while ( myCurCrMethod->myArgs.size() < argNb )
+ while ( (int) myCurCrMethod->myArgs.size() < argNb )
myCurCrMethod->myArgs.push_back( "None" );
if ( arg.IsEmpty() )
myCurCrMethod->myArgs[ argNb-1 ] = "None";
//================================================================================
/*!
* \brief Remember hypothesis parameter values
- * \param theCommand - The called hypothesis method
+ * \param theCommand - The called hypothesis method
*/
//================================================================================
for ( ; type2meth != myAlgoType2CreationMethod.end(); ++type2meth )
{
CreationMethod& crMethod = type2meth->second;
- while ( crMethod.myArgs.size() < i+1 )
- crMethod.myArgs.push_back( "[]" );
- crMethod.myArgs[ i ] = theCommand->GetArg( 1 ); // arg value
+ while ( (int) crMethod.myArgs.size() < i+1 )
+ crMethod.myArgs.push_back( "[]" );
+ crMethod.myArgs[ i ] = theCommand->GetArg( 1 ); // arg value
}
myArgCommands.push_back( theCommand );
}
//================================================================================
/*!
* \brief Convert methods of 1D hypotheses to my own methods
- * \param theCommand - The called hypothesis method
+ * \param theCommand - The called hypothesis method
*/
//================================================================================
//================================================================================
/*!
* \brief
- * \param theAdditionCmd - command to be converted
- * \param theMesh - mesh instance
- * \retval bool - status
+ * \param theAdditionCmd - command to be converted
+ * \param theMesh - mesh instance
+ * \retval bool - status
*/
//================================================================================
//================================================================================
/*!
* \brief additionally to Addition2Creation, clears SetDistrType() command
- * \param theCmd - AddHypothesis() command
- * \param theMesh - mesh to which a hypothesis is added
- * \retval bool - convertion result
+ * \param theCmd - AddHypothesis() command
+ * \param theMesh - mesh to which a hypothesis is added
+ * \retval bool - conversion result
*/
//================================================================================
/*!
* \brief Convert the command adding "SegmentLengthAroundVertex" to mesh
* into regular1D.LengthNearVertex( length, vertex )
- * \param theCmd - The command like mesh.AddHypothesis( vertex, SegmentLengthAroundVertex )
- * \param theMesh - The mesh needing this hypo
- * \retval bool - false if the command cant be converted
+ * \param theCmd - The command like mesh.AddHypothesis( vertex, SegmentLengthAroundVertex )
+ * \param theMesh - The mesh needing this hypo
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
_pyID vertex = theCmd->GetArg( 1 );
- // the problem here is that segment algo will not be found
+ // the problem here is that segment algo can be not found
// by pyHypothesis::Addition2Creation() for <vertex>, so we try to find
// geometry where segment algorithm is assigned
- Handle(_pyHypothesis) algo;
_pyID geom = vertex;
+ Handle(_pyHypothesis) algo = theGen->FindAlgo( geom, theMeshID, this );
while ( algo.IsNull() && !geom.IsEmpty()) {
// try to find geom as a father of <vertex>
geom = FatherID( geom );
algo = theGen->FindAlgo( geom, theMeshID, this );
}
- if ( algo.IsNull() )
+ if ( algo.IsNull() || geom.IsEmpty() )
return false; // also possible to find geom as brother of veretex...
+
// set geom instead of vertex
theCmd->SetArg( 1, geom );
- // set vertex as a second arg
- if ( myCurCrMethod->myArgs.size() < 1) setCreationArg( 1, "1" ); // :(
- setCreationArg( 2, vertex );
-
// mesh.AddHypothesis(vertex, SegmentLengthAroundVertex) -->
- // theMeshID.LengthNearVertex( length, vertex )
- return _pyHypothesis::Addition2Creation( theCmd, theMeshID );
+ // SegmentLengthAroundVertex = Regular_1D.LengthNearVertex( length )
+ if ( _pyHypothesis::Addition2Creation( theCmd, theMeshID ))
+ {
+ // set vertex as a second arg
+ theCmd->SetArg( 2, vertex );
+
+ return true;
+ }
}
return false;
}
//================================================================================
/*!
* \brief _pyAlgorithm constructor
- * \param theCreationCmd - The command like "algo = smeshgen.CreateHypothesis(type,lib)"
+ * \param theCreationCmd - The command like "algo = smeshgen.CreateHypothesis(type,lib)"
*/
//================================================================================
//================================================================================
/*!
* \brief Convert the command adding an algorithm to mesh
- * \param theCmd - The command like mesh.AddHypothesis( geom, algo )
- * \param theMesh - The mesh needing this algo
- * \retval bool - false if the command cant be converted
+ * \param theCmd - The command like mesh.AddHypothesis( geom, algo )
+ * \param theMesh - The mesh needing this algo
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
//================================================================================
/*!
* \brief Return starting position of a part of python command
- * \param thePartIndex - The index of command part
- * \retval int - Part position
+ * \param thePartIndex - The index of command part
+ * \retval int - Part position
*/
//================================================================================
//================================================================================
/*!
* \brief Store starting position of a part of python command
- * \param thePartIndex - The index of command part
- * \param thePosition - Part position
+ * \param thePartIndex - The index of command part
+ * \param thePosition - Part position
*/
//================================================================================
//================================================================================
/*!
* \brief Returns whitespace symbols at the line beginning
- * \retval TCollection_AsciiString - result
+ * \retval TCollection_AsciiString - result
*/
//================================================================================
TCollection_AsciiString _pyCommand::GetIndentation()
{
int end = 1;
- if ( GetBegPos( RESULT_IND ) == UNKNOWN )
- GetWord( myString, end, true );
- else
- end = GetBegPos( RESULT_IND );
- return myString.SubString( 1, Max( end - 1, 1 ));
+ //while ( end <= Length() && isblank( myString.Value( end )))
+ //ANA: isblank() function isn't provided in VC2010 compiler
+ while ( end <= Length() && ( myString.Value( end ) == ' ' || myString.Value( end ) == '\t') )
+ ++end;
+ return ( end == 1 ) ? _AString("") : myString.SubString( 1, end - 1 );
}
//================================================================================
/*!
* \brief Return substring of python command looking like ResultValue = Obj.Meth()
- * \retval const TCollection_AsciiString & - ResultValue substring
+ * \retval const TCollection_AsciiString & - ResultValue substring
*/
//================================================================================
//================================================================================
/*!
* \brief Return substring of python command looking like ResVal = Obj.Method()
- * \retval const TCollection_AsciiString & - Method substring
+ * \retval const TCollection_AsciiString & - Method substring
*/
//================================================================================
if ( GetBegPos( METHOD_IND ) == UNKNOWN )
{
// beginning
- int begPos = GetBegPos( OBJECT_IND ) + myObj.Length();
+ int begPos = GetBegPos( OBJECT_IND );
bool forward = true;
if ( begPos < 1 ) {
begPos = myString.Location( "(", 1, Length() ) - 1;
forward = false;
}
+ else {
+ begPos += myObj.Length();
+ }
// store
myMeth = GetWord( myString, begPos, forward );
SetBegPos( METHOD_IND, begPos );
//================================================================================
/*!
* \brief Return substring of python command looking like ResVal = Obj.Meth(Arg1,...)
- * \retval const TCollection_AsciiString & - Arg<index> substring
+ * \retval const TCollection_AsciiString & - Arg<index> substring
*/
//================================================================================
//================================================================================
/*!
* \brief Check if char is a word part
- * \param c - The character to check
- * \retval bool - The check result
+ * \param c - The character to check
+ * \retval bool - The check result
*/
//================================================================================
//================================================================================
/*!
* \brief Looks for a word in the string and returns word's beginning
- * \param theString - The input string
- * \param theStartPos - The position to start the search, returning word's beginning
- * \param theForward - The search direction
- * \retval TCollection_AsciiString - The found word
+ * \param theString - The input string
+ * \param theStartPos - The position to start the search, returning word's beginning
+ * \param theForward - The search direction
+ * \retval TCollection_AsciiString - The found word
*/
//================================================================================
//================================================================================
/*!
* \brief Look for position where not space char is
- * \param theString - The string
- * \param thePos - The position to search from and which returns result
- * \retval bool - false if there are only space after thePos in theString
+ * \param theString - The string
+ * \param thePos - The position to search from and which returns result
+ * \retval bool - false if there are only space after thePos in theString
*/
//================================================================================
//================================================================================
/*!
* \brief Modify a part of the command
- * \param thePartIndex - The index of the part
- * \param thePart - The new part string
- * \param theOldPart - The old part
+ * \param thePartIndex - The index of the part
+ * \param thePart - The new part string
+ * \param theOldPart - The old part
*/
//================================================================================
void _pyCommand::SetPart(int thePartIndex, const TCollection_AsciiString& thePart,
- TCollection_AsciiString& theOldPart)
+ TCollection_AsciiString& theOldPart)
{
int pos = GetBegPos( thePartIndex );
if ( pos <= Length() && theOldPart != thePart)
//================================================================================
/*!
- * \brief Set agrument
- * \param index - The argument index, it counts from 1
- * \param theArg - The argument string
+ * \brief Set argument
+ * \param index - The argument index, it counts from 1
+ * \param theArg - The argument string
*/
//================================================================================
//================================================================================
/*!
* \brief Insert accessor method after theObjectID
- * \param theObjectID - id of the accessed object
- * \param theAcsMethod - name of the method giving access to the object
- * \retval bool - false if theObjectID is not found in the command string
+ * \param theObjectID - id of the accessed object
+ * \param theAcsMethod - name of the method giving access to the object
+ * \retval bool - false if theObjectID is not found in the command string
*/
//================================================================================
//================================================================================
/*!
* \brief Return method name giving access to an interaface object wrapped by python class
- * \retval const char* - method name
+ * \retval const char* - method name
*/
//================================================================================
bool _pySubMesh::CanBeArgOfMethod(const _AString& theMethodName)
{
return false;
-// // names of all methods where a sub-mesh can be used as argument
-// static TStringSet methods;
-// if ( methods.empty() ) {
-// const char * names[] = {
-// // methods of SMESH_Gen
-// "CopyMesh",
-// // methods of SMESH_Group
-// "AddFrom",
-// // methods of SMESH_Measurements
-// "MinDistance",
-// // methods of SMESH_Mesh
-// "ExportPartToMED","ExportCGNS","ExportPartToDAT","ExportPartToUNV","ExportPartToSTL",
-// "RemoveSubMesh",
-// // methods of SMESH_MeshEditor
-// "ReorientObject","Reorient2D","TriToQuadObject","QuadToTriObject","SplitQuadObject",
-// "SplitVolumesIntoTetra","SmoothObject","SmoothParametricObject","ConvertFromQuadraticObject",
-// "RotationSweepObject","RotationSweepObjectMakeGroups","RotationSweepObject1D",
-// "RotationSweepObject1DMakeGroups","RotationSweepObject2D","RotationSweepObject2DMakeGroups",
-// "ExtrusionSweepObject","ExtrusionSweepObjectMakeGroups","ExtrusionSweepObject0D",
-// "ExtrusionSweepObject0DMakeGroups","ExtrusionSweepObject1D","ExtrusionSweepObject2D",
-// "ExtrusionSweepObject1DMakeGroups","ExtrusionSweepObject2DMakeGroups",
-// "ExtrusionAlongPathObjX","ExtrusionAlongPathObject","ExtrusionAlongPathObjectMakeGroups",
-// "ExtrusionAlongPathObject1D","ExtrusionAlongPathObject1DMakeGroups",
-// "ExtrusionAlongPathObject2D","ExtrusionAlongPathObject2DMakeGroups","MirrorObject",
-// "MirrorObjectMakeGroups","MirrorObjectMakeMesh","TranslateObject","Scale",
-// "TranslateObjectMakeGroups","TranslateObjectMakeMesh","ScaleMakeGroups","ScaleMakeMesh",
-// "RotateObject","RotateObjectMakeGroups","RotateObjectMakeMesh","FindCoincidentNodesOnPart",
-// "FindCoincidentNodesOnPartBut","FindEqualElements","FindAmongElementsByPoint",
-// "MakeBoundaryMesh","Create0DElementsOnAllNodes",
-// "" }; // <- mark of end
-// methods.Insert( names );
-// }
-// return methods.Contains( theMethodName );
+ // names of all methods where a sub-mesh can be used as argument
+ // static TStringSet methods;
+ // if ( methods.empty() ) {
+ // const char * names[] = {
+ // // methods of SMESH_Gen
+ // "CopyMesh",
+ // // methods of SMESH_Group
+ // "AddFrom",
+ // // methods of SMESH_Measurements
+ // "MinDistance",
+ // // methods of SMESH_Mesh
+ // "ExportPartToMED","ExportCGNS","ExportPartToDAT","ExportPartToUNV","ExportPartToSTL",
+ // "RemoveSubMesh",
+ // // methods of SMESH_MeshEditor
+ // "ReorientObject","Reorient2D","TriToQuadObject","QuadToTriObject","SplitQuadObject",
+ // "SplitVolumesIntoTetra","SmoothObject","SmoothParametricObject","ConvertFromQuadraticObject",
+ // "RotationSweepObject","RotationSweepObjectMakeGroups","RotationSweepObject1D",
+ // "RotationSweepObject1DMakeGroups","RotationSweepObject2D","RotationSweepObject2DMakeGroups",
+ // "ExtrusionSweepObject","ExtrusionSweepObjectMakeGroups","ExtrusionSweepObject0D",
+ // "ExtrusionSweepObject0DMakeGroups","ExtrusionSweepObject1D","ExtrusionSweepObject2D",
+ // "ExtrusionSweepObject1DMakeGroups","ExtrusionSweepObject2DMakeGroups",
+ // "ExtrusionAlongPathObjX","ExtrusionAlongPathObject","ExtrusionAlongPathObjectMakeGroups",
+ // "ExtrusionAlongPathObject1D","ExtrusionAlongPathObject1DMakeGroups",
+ // "ExtrusionAlongPathObject2D","ExtrusionAlongPathObject2DMakeGroups","MirrorObject",
+ // "MirrorObjectMakeGroups","MirrorObjectMakeMesh","TranslateObject","Scale",
+ // "TranslateObjectMakeGroups","TranslateObjectMakeMesh","ScaleMakeGroups","ScaleMakeMesh",
+ // "RotateObject","RotateObjectMakeGroups","RotateObjectMakeMesh","FindCoincidentNodesOnPart",
+ // "FindCoincidentNodesOnPartBut","FindEqualElements","FindAmongElementsByPoint",
+ // "MakeBoundaryMesh","Create0DElementsOnAllNodes",
+ // "" }; // <- mark of end
+ // methods.Insert( names );
+ // }
+ // return methods.Contains( theMethodName );
}
//================================================================================
//}
//else {
// ------------------------->>>>> GroupOnGeom( geom, name, typ )
- _pyID type = theCreationCmd->GetArg( 1 );
- _pyID name = theCreationCmd->GetArg( 2 );
- theCreationCmd->SetMethod( "GroupOnGeom" );
- theCreationCmd->RemoveArgs();
- theCreationCmd->SetArg( 1, geom );
- theCreationCmd->SetArg( 2, name );
- theCreationCmd->SetArg( 3, type );
+ _pyID type = theCreationCmd->GetArg( 1 );
+ _pyID name = theCreationCmd->GetArg( 2 );
+ theCreationCmd->SetMethod( "GroupOnGeom" );
+ theCreationCmd->RemoveArgs();
+ theCreationCmd->SetArg( 1, geom );
+ theCreationCmd->SetArg( 2, name );
+ theCreationCmd->SetArg( 3, type );
//}
}
else if ( method == "CreateGroupFromFilter" )
_strings.erase( itLess, ++itMore );
}
- else // to few string to make a family fot them
+ else // too few string to make a family for them
{
_strings.insert( itStr, str );
}
if (( len = itSub->isIn( str + itSub->_prefix.Length() )) >= 0 )
return itSub->_prefix.Length() + len;
}
- else if ( cmp > 0 )
+ else if ( cmp < 0 )
break;
}
if ( !_strings.empty() )
