-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#include <LDOMParser.hxx>
-#ifdef WNT
+#ifdef WIN32
#include <windows.h>
#else
#include <unistd.h>
#endif
-
-IMPLEMENT_STANDARD_HANDLE (_pyObject ,Standard_Transient);
-IMPLEMENT_STANDARD_HANDLE (_pyCommand ,Standard_Transient);
-IMPLEMENT_STANDARD_HANDLE (_pyHypothesisReader,Standard_Transient);
-IMPLEMENT_STANDARD_HANDLE (_pyGen ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyMesh ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pySubMesh ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyMeshEditor ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyHypothesis ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pySelfEraser ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyGroup ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyFilter ,_pyObject);
-IMPLEMENT_STANDARD_HANDLE (_pyAlgorithm ,_pyHypothesis);
-IMPLEMENT_STANDARD_HANDLE (_pyComplexParamHypo,_pyHypothesis);
-IMPLEMENT_STANDARD_HANDLE (_pyNumberOfSegmentsHyp,_pyHypothesis);
-
IMPLEMENT_STANDARD_RTTIEXT(_pyObject ,Standard_Transient);
IMPLEMENT_STANDARD_RTTIEXT(_pyCommand ,Standard_Transient);
IMPLEMENT_STANDARD_RTTIEXT(_pyHypothesisReader,Standard_Transient);
/*!
* \brief Container of commands into which the initial script is split.
- * It also contains data coresponding to SMESH_Gen contents
+ * It also contains data corresponding to SMESH_Gen contents
*/
static Handle(_pyGen) theGen;
if ( cmd->GetString().Location( TPythonDump::NotPublishedObjectName(), 1, cmd->Length() ))
{
bool isResultPublished = false;
- for ( int i = 0; i < cmd->GetNbResultValues(); i++ )
+ const int nbRes = cmd->GetNbResultValues();
+ for ( int i = 0; i < nbRes; i++ )
{
_pyID objID = cmd->GetResultValue( i+1 );
if ( cmd->IsStudyEntry( objID ))
}
// check if an Object was created in the script
_AString comment;
- const _pyID& obj = cmd->GetObject();
- if ( !obj.IsEmpty() && cmd->IsStudyEntry( obj ) && !presentObjects.count( obj ))
+
+ _pyID obj = cmd->GetObject();
+ if ( obj.Search( "print(" ) == 1 )
+ return; // print statement
+
+ if ( !obj.IsEmpty() && obj.Value( obj.Length() ) == ')' )
+ // remove an accessor method
+ obj = _pyCommand( obj ).GetObject();
+
+ const bool isMethodCall = cmd->IsMethodCall();
+ if ( !obj.IsEmpty() && isMethodCall && !presentObjects.count( obj ) )
{
comment = "not created Object";
theGen->ObjectCreationRemoved( obj );
comment += *id + " has not been yet created";
break;
}
+ // if ( idList.empty() && cmd->IsID( arg ) && !presentObjects.count( arg ))
+ // comment += arg + " has not been yet created";
}
// treat result objects
const _pyID& result = cmd->GetResultValue();
list< _pyID > idList = cmd->GetStudyEntries( result );
list< _pyID >::iterator id = idList.begin();
for ( ; id != idList.end(); ++id )
+ {
if ( comment.IsEmpty() )
presentObjects.insert( *id );
else
theGen->ObjectCreationRemoved( *id ); // objID.SetName( name ) is not needed
+ }
+ if ( idList.empty() && cmd->IsID( result ))
+ presentObjects.insert( result );
}
// comment the command
if ( !comment.IsEmpty() )
// - FT_EntityType = 36
// v 7.3.0: FT_Undefined == 46, new items:
// - FT_ConnectedElements = 39
+ // v 7.6.0: FT_Undefined == 47, new items:
+ // - FT_BelongToMeshGroup = 22
+ // v 8.1.0: FT_Undefined == 48, new items:
+ // - FT_NodeConnectivityNumber= 22
+ // v 8.5.0: FT_Undefined == 49, new items:
+ // - FT_Deflection2D = 22
+ // v 9.3.0: FT_Undefined == 50, new items:
+ // - FT_Length3D = 22
//
// It's necessary to continue recording this history and to fill
// undef2newItems (see below) accordingly.
undef2newItems[ 44 ].push_back( 37 );
undef2newItems[ 45 ].push_back( 36 );
undef2newItems[ 46 ].push_back( 39 );
+ undef2newItems[ 47 ].push_back( 22 );
+ undef2newItems[ 48 ].push_back( 22 );
+ undef2newItems[ 49 ].push_back( 22 );
+ undef2newItems[ 50 ].push_back( 22 );
ASSERT( undef2newItems.rbegin()->first == SMESH::FT_Undefined );
}
//================================================================================
/*!
* \brief Replaces "SMESH.PointStruct(x,y,z)" and "SMESH.DirStruct( SMESH.PointStruct(x,y,z))"
- * arguments of a given command by a list "[x,y,z]" if the list is accesible
+ * arguments of a given command by a list "[x,y,z]" if the list is accessible
* type of argument.
*/
//================================================================================
- void StructToList( Handle( _pyCommand)& theCommand )
+ void StructToList( Handle( _pyCommand)& theCommand, const bool checkMethod=true )
{
static TStringSet methodsAcceptingList;
if ( methodsAcceptingList.empty() ) {
"ExtrusionSweepObjectMakeGroups","ExtrusionSweepObject0D",
"ExtrusionSweepObject1D","ExtrusionSweepObject1DMakeGroups",
"ExtrusionSweepObject2D","ExtrusionSweepObject2DMakeGroups",
+ "ExtrusionSweepObjects","RotationSweepObjects","ExtrusionAlongPathObjects",
"Translate","TranslateMakeGroups","TranslateMakeMesh",
"TranslateObject","TranslateObjectMakeGroups", "TranslateObjectMakeMesh",
- "ExtrusionAlongPathX","ExtrusionAlongPathObjX"
+ "ExtrusionAlongPathX","ExtrusionAlongPathObjX","SplitHexahedraIntoPrisms"
,"" }; // <- mark of the end
methodsAcceptingList.Insert( methodNames );
}
- if ( methodsAcceptingList.Contains( theCommand->GetMethod() ))
+ if ( !checkMethod || methodsAcceptingList.Contains( theCommand->GetMethod() ))
{
for ( int i = theCommand->GetNbArgs(); i > 0; --i )
{
//================================================================================
/*!
* \brief Replaces "mesh.GetIDSource([id1,id2])" argument of a given command by
- * a list "[id1,id2]" if the list is an accesible type of argument.
+ * a list "[id1,id2]" if the list is an accessible type of argument.
*/
//================================================================================
"ExportCGNS","ExportGMF",
"Create0DElementsOnAllNodes","Reorient2D","QuadTo4Tri",
"ScaleMakeGroups","Scale","ScaleMakeMesh",
- "FindCoincidentNodesOnPartBut","DoubleElements"
+ "FindCoincidentNodesOnPartBut","DoubleElements",
+ "ExtrusionSweepObjects","RotationSweepObjects","ExtrusionAlongPathObjects"
,"" }; // <- mark of the end
methodsAcceptingList.Insert( methodNames );
}
}
}
}
+
+ bool _FilterArg( const _AString& theArg )
+ {
+ static std::list<_AString> filteredArgs;
+ static bool initialized = false;
+ if ( !initialized ) {
+ initialized = true;
+ filteredArgs.push_back( "SMESH.MED_V2_1" );
+ filteredArgs.push_back( "SMESH.MED_V2_2" );
+ }
+ return std::find( filteredArgs.begin(), filteredArgs.end(), theArg ) != filteredArgs.end();
+ }
}
//================================================================================
/*!
* \brief Convert a python script using commands of smeshBuilder.py
- * \param theScript - Input script
+ * \param theScriptLines - Lines of the input script
* \param theEntry2AccessorMethod - returns method names to access to
* objects wrapped with python class
* \param theObjectNames - names of objects
* \param theRemovedObjIDs - entries of objects whose created commands were removed
* \param theHistoricalDump - true means to keep all commands, false means
* to exclude commands relating to objects removed from study
- * \retval TCollection_AsciiString - Convertion result
+ * \retval TCollection_AsciiString - Conversion result
*/
//================================================================================
-TCollection_AsciiString
-SMESH_2smeshpy::ConvertScript(const TCollection_AsciiString& theScript,
+void
+SMESH_2smeshpy::ConvertScript(std::list< TCollection_AsciiString >& theScriptLines,
Resource_DataMapOfAsciiStringAsciiString& theEntry2AccessorMethod,
Resource_DataMapOfAsciiStringAsciiString& theObjectNames,
std::set< TCollection_AsciiString >& theRemovedObjIDs,
- SALOMEDS::Study_ptr& theStudy,
const bool theToKeepAllCommands)
{
- theGen = new _pyGen( theEntry2AccessorMethod,
- theObjectNames,
- theRemovedObjIDs,
- theStudy,
- theToKeepAllCommands );
+ std::list< TCollection_AsciiString >::iterator lineIt;
+ // process notebook variables
+ {
+ SMESH_NoteBook aNoteBook;
- // split theScript into separate commands
+ for ( lineIt = theScriptLines.begin(); lineIt != theScriptLines.end(); ++lineIt )
+ aNoteBook.AddCommand( *lineIt );
- SMESH_NoteBook * aNoteBook = new SMESH_NoteBook();
+ theScriptLines.clear();
- int from = 1, end = theScript.Length(), to;
- while ( from < end && ( to = theScript.Location( "\n", from, end )))
- {
- if ( to != from )
- // cut out and store a command
- aNoteBook->AddCommand( theScript.SubString( from, to - 1 ));
- from = to + 1;
+ aNoteBook.ReplaceVariables();
+
+ aNoteBook.GetResultLines( theScriptLines );
}
- aNoteBook->ReplaceVariables();
+ // convert to smeshBuilder.py API
- TCollection_AsciiString aNoteScript = aNoteBook->GetResultScript();
- delete aNoteBook;
- aNoteBook = 0;
+ theGen = new _pyGen( theEntry2AccessorMethod,
+ theObjectNames,
+ theRemovedObjIDs,
+ theToKeepAllCommands );
- // split theScript into separate commands
- from = 1, end = aNoteScript.Length();
- while ( from < end && ( to = aNoteScript.Location( "\n", from, end )))
- {
- if ( to != from )
- // cut out and store a command
- theGen->AddCommand( aNoteScript.SubString( from, to - 1 ));
- from = to + 1;
- }
+ for ( lineIt = theScriptLines.begin(); lineIt != theScriptLines.end(); ++lineIt )
+ theGen->AddCommand( *lineIt );
+
+ theScriptLines.clear();
// finish conversion
theGen->Flush();
MESSAGE_BEGIN ( std::endl << " ######## RESULT ######## " << std::endl<< std::endl );
#endif
- // clean commmands of removed objects depending on myIsPublished flag
+ // clean commands of removed objects depending on myIsPublished flag
theGen->ClearCommands();
// reorder commands after conversion
} while ( orderChanges );
// concat commands back into a script
- TCollection_AsciiString aScript, aPrevCmd;
+ TCollection_AsciiString aPrevCmd;
set<_pyID> createdObjects;
+ createdObjects.insert( "smeshBuilder" );
+ createdObjects.insert( "smesh" );
for ( cmd = theGen->GetCommands().begin(); cmd != theGen->GetCommands().end(); ++cmd )
{
#ifdef DUMP_CONVERSION
#endif
if ( !(*cmd)->IsEmpty() && aPrevCmd != (*cmd)->GetString()) {
CheckObjectPresence( *cmd, createdObjects );
- aPrevCmd = (*cmd)->GetString();
- aScript += "\n";
- aScript += aPrevCmd;
+ if ( !(*cmd)->IsEmpty() ) {
+ aPrevCmd = (*cmd)->GetString();
+ theScriptLines.push_back( aPrevCmd );
+ }
}
}
- aScript += "\n";
theGen->Free();
theGen.Nullify();
-
- return aScript;
}
//================================================================================
_pyGen::_pyGen(Resource_DataMapOfAsciiStringAsciiString& theEntry2AccessorMethod,
Resource_DataMapOfAsciiStringAsciiString& theObjectNames,
std::set< TCollection_AsciiString >& theRemovedObjIDs,
- SALOMEDS::Study_ptr& theStudy,
const bool theToKeepAllCommands)
: _pyObject( new _pyCommand( "", 0 )),
myNbCommands( 0 ),
myRemovedObjIDs( theRemovedObjIDs ),
myNbFilters( 0 ),
myToKeepAllCommands( theToKeepAllCommands ),
- myStudy( SALOMEDS::Study::_duplicate( theStudy )),
myGeomIDNb(0), myGeomIDIndex(-1)
{
// make that GetID() to return TPythonDump::SMESHGenName()
GetCreationCmd()->GetString() += "=";
// Find 1st digit of study entry by which a GEOM object differs from a SMESH object
- if ( !theObjectNames.IsEmpty() && !CORBA::is_nil( theStudy ))
+ if ( !theObjectNames.IsEmpty() )
{
// find a GEOM entry
_pyID geomID;
- SALOMEDS::SComponent_wrap geomComp = theStudy->FindComponent("GEOM");
+ SALOMEDS::SComponent_wrap geomComp = SMESH_Gen_i::getStudyServant()->FindComponent("GEOM");
if ( geomComp->_is_nil() ) return;
CORBA::String_var entry = geomComp->GetID();
geomID = entry.in();
//================================================================================
/*!
* \brief Convert a command using a specific converter
- * \param theCommand - the command to convert
+ * \param theCommand - the command to convert
*/
//================================================================================
// Method( SMESH.PointStruct(x,y,z)... -> Method( [x,y,z]...
StructToList( aCommand );
+ const TCollection_AsciiString& method = aCommand->GetMethod();
+
// not to erase _pySelfEraser's etc. used as args in some commands
- std::list< _pyID >::const_iterator id = myKeepAgrCmdsIDs.begin();
- for ( ; id != myKeepAgrCmdsIDs.end(); ++id )
- if ( *id != objID && theCommand.Search( *id ) > id->Length() )
+ {
+#ifdef USE_STRING_FAMILY
+ std::list<_pyID> objIDs;
+ if ( myKeepAgrCmdsIDs.IsInArgs( aCommand, objIDs ))
{
- Handle(_pyObject) obj = FindObject( *id );
- if ( !obj.IsNull() )
- obj->AddArgCmd( aCommand );
+ std::list<_pyID>::iterator objID = objIDs.begin();
+ for ( ; objID != objIDs.end(); ++objID )
+ {
+ Handle(_pyObject) obj = FindObject( *objID );
+ if ( !obj.IsNull() )
+ {
+ obj->AddArgCmd( aCommand );
+ //cout << objID << " found in " << theCommand << endl;
+ }
+ }
}
+#else
+ std::list< _pyID >::const_iterator id = myKeepAgrCmdsIDs.begin();
+ for ( ; id != myKeepAgrCmdsIDs.end(); ++id )
+ if ( *id != objID && theCommand.Search( *id ) > id->Length() )
+ {
+ Handle(_pyObject) obj = FindObject( *id );
+ if ( !obj.IsNull() )
+ obj->AddArgCmd( aCommand );
+ }
+#endif
+ }
// Find an object to process theCommand
{
//id_mesh->second->AddProcessedCmd( aCommand );
+ // Wrap Export*() into try-except
+ if ( aCommand->MethodStartsFrom("Export"))
+ {
+ _AString tab = "\t";
+ _AString indent = aCommand->GetIndentation();
+ _AString tryStr = indent + "try:";
+ _AString newCmd = indent + tab + ( aCommand->GetString().ToCString() + indent.Length() );
+ _AString pasCmd = indent + tab + "pass"; // to keep valid if newCmd is erased
+ _AString excStr = indent + "except:";
+ _AString msgStr = indent + "\tprint('"; msgStr += method + "() failed. Invalid file name?')";
+
+ myCommands.insert( --myCommands.end(), new _pyCommand( tryStr, myNbCommands ));
+ aCommand->Clear();
+ aCommand->GetString() = newCmd;
+ aCommand->SetOrderNb( ++myNbCommands );
+ myCommands.push_back( new _pyCommand( pasCmd, ++myNbCommands ));
+ myCommands.push_back( new _pyCommand( excStr, ++myNbCommands ));
+ myCommands.push_back( new _pyCommand( msgStr, ++myNbCommands ));
+ }
// check for mesh editor object
if ( aCommand->GetMethod() == "GetMeshEditor" ) { // MeshEditor creation
_pyID editorID = aCommand->GetResultValue();
else if ( aCommand->GetMethod() == "GetSubMesh" ) { // SubMesh creation
_pyID subMeshID = aCommand->GetResultValue();
Handle(_pySubMesh) subMesh = new _pySubMesh( aCommand );
- CheckObjectIsReCreated( subMesh );
- myObjects.insert( make_pair( subMeshID, subMesh ));
+ AddObject( subMesh );
}
// Method( mesh.GetIDSource([id1,id2]) -> Method( [id1,id2]
//addFilterUser( aCommand, theGen ); // protect filters from clearing
- const TCollection_AsciiString& method = aCommand->GetMethod();
-
// some commands of SMESH_MeshEditor create meshes and groups
_pyID meshID, groups;
if ( method.Search("MakeMesh") != -1 )
else if ( method == "MakeBoundaryElements")
meshID = aCommand->GetResultValue(2);
- if ( method.Search("MakeGroups") != -1 ||
- method == "ExtrusionAlongPathX" ||
- method == "ExtrusionAlongPathObjX" ||
- method == "DoubleNodeGroupNew" ||
- method == "DoubleNodeGroupsNew" ||
- method == "DoubleNodeElemGroupNew" ||
- method == "DoubleNodeElemGroupsNew"||
- method == "DoubleNodeElemGroup2New"||
- method == "DoubleNodeElemGroups2New"
+ if ( method.Search("MakeGroups") != -1 ||
+ method == "ExtrusionAlongPathX" ||
+ method == "ExtrusionAlongPathObjX" ||
+ method == "DoubleNodeGroupNew" ||
+ method == "DoubleNodeGroupsNew" ||
+ method == "DoubleNodeElemGroupNew" ||
+ method == "DoubleNodeElemGroupsNew" ||
+ method == "DoubleNodeElemGroup2New" ||
+ method == "DoubleNodeElemGroups2New" ||
+ method == "AffectedElemGroupsInRegion"
)
groups = aCommand->GetResultValue();
else if ( method == "MakeBoundaryMesh" )
aCommand->GetString() += tmpCmd.GetString();
}
// IMP issue 0021014
- // set GetCriterion(elementType,CritType,Compare,Treshold,UnaryOp,BinaryOp,Tolerance)
- // 1 2 3 4 5 6 7
+ // set GetCriterion(elementType,CritType,Compare,Threshold,UnaryOp,BinaryOp,Tolerance)
+ // 1 2 3 4 5 6 7
// instead of "SMESH.Filter.Criterion(
// Type,Compare,Threshold,ThresholdStr,ThresholdID,UnaryOp,BinaryOp,Tolerance,TypeOfElement,Precision)
// 1 2 3 4 5 6 7 8 9 10
if ( Type == "SMESH.FT_ElemGeomType" )
{
// set SMESH.GeometryType instead of a numerical Threshold
- const char* types[SMESH::Geom_BALL+1] = {
+ const int nbTypes = SMESH::Geom_LAST;
+ const char* types[] = {
"Geom_POINT", "Geom_EDGE", "Geom_TRIANGLE", "Geom_QUADRANGLE", "Geom_POLYGON",
"Geom_TETRA", "Geom_PYRAMID", "Geom_HEXA", "Geom_PENTA", "Geom_HEXAGONAL_PRISM",
"Geom_POLYHEDRA", "Geom_BALL" };
- if ( -1 < iGeom && iGeom < SMESH::Geom_POLYHEDRA+1 )
+ if ( -1 < iGeom && iGeom < nbTypes )
Threshold = SMESH + types[ iGeom ];
+#ifdef _DEBUG_
+ // is types complete? (compilation failure mains that enum GeometryType changed)
+ int _asrt[( sizeof(types) / sizeof(const char*) == nbTypes ) ? 2 : -1 ]; _asrt[0]=_asrt[1];
+#endif
}
if (Type == "SMESH.FT_EntityType")
{
// set SMESH.EntityType instead of a numerical Threshold
- const char* types[SMESH::Entity_Ball+1] = {
+ const int nbTypes = SMESH::Entity_Last;
+ const char* types[] = {
"Entity_Node", "Entity_0D", "Entity_Edge", "Entity_Quad_Edge",
"Entity_Triangle", "Entity_Quad_Triangle", "Entity_BiQuad_Triangle",
"Entity_Quadrangle", "Entity_Quad_Quadrangle", "Entity_BiQuad_Quadrangle",
"Entity_Polygon", "Entity_Quad_Polygon", "Entity_Tetra", "Entity_Quad_Tetra",
"Entity_Pyramid", "Entity_Quad_Pyramid",
"Entity_Hexa", "Entity_Quad_Hexa", "Entity_TriQuad_Hexa",
- "Entity_Penta", "Entity_Quad_Penta", "Entity_Hexagonal_Prism",
+ "Entity_Penta", "Entity_Quad_Penta", "Entity_BiQuad_Penta", "Entity_Hexagonal_Prism",
"Entity_Polyhedra", "Entity_Quad_Polyhedra", "Entity_Ball" };
- if ( -1 < iGeom && iGeom < SMESH::Entity_Quad_Polyhedra+1 )
+ if ( -1 < iGeom && iGeom < nbTypes )
Threshold = SMESH + types[ iGeom ];
+#ifdef _DEBUG_
+ // is 'types' complete? (compilation failure mains that enum EntityType changed)
+ int _asrt[( sizeof(types) / sizeof(const char*) == nbTypes ) ? 2 : -1 ]; _asrt[0]=_asrt[1];
+#endif
}
}
if ( ThresholdID.Length() != 2 ) // neither '' nor ""
//================================================================================
/*!
* \brief Convert the command or remember it for later conversion
- * \param theCommand - The python command calling a method of SMESH_Gen
+ * \param theCommand - The python command calling a method of SMESH_Gen
*/
//================================================================================
AddObject( mesh );
return;
}
- if( method == "CreateMeshesFromMED" ||
- method == "CreateMeshesFromSAUV"||
- method == "CreateMeshesFromCGNS" ||
- method == "CreateMeshesFromGMF" ) // command result is ( [mesh1,mesh2], status )
+ if ( method == "CreateMeshesFromMED" ||
+ method == "CreateMeshesFromSAUV"||
+ method == "CreateMeshesFromCGNS" ||
+ method == "CreateMeshesFromGMF" ) // command result is ( [mesh1,mesh2], status )
{
- for ( int ind = 0; ind < theCommand->GetNbResultValues(); ind++ )
+ std::list< _pyID > meshIDs = theCommand->GetStudyEntries( theCommand->GetResultValue() );
+ std::list< _pyID >::iterator meshID = meshIDs.begin();
+ for ( ; meshID != meshIDs.end(); ++meshID )
{
- _pyID meshID = theCommand->GetResultValue(ind+1);
- if ( !theCommand->IsStudyEntry( meshID ) ) continue;
- Handle(_pyMesh) mesh = new _pyMesh( theCommand, theCommand->GetResultValue(ind+1));
+ Handle(_pyMesh) mesh = new _pyMesh( theCommand, *meshID );
AddObject( mesh );
}
if ( method == "CreateMeshesFromGMF" )
theCommand->SetArg( 1, file );
}
}
+ if ( method == "CopyMeshWithGeom" )
+ {
+ std::list< _pyID > entries = theCommand->GetStudyEntries( theCommand->GetResultValue() );
+ Handle(_pyMesh) mesh = new _pyMesh( theCommand, entries.front() );
+ AddObject( mesh );
+ }
// CreateHypothesis()
if ( method == "CreateHypothesis" )
method == "CreateMeasurements" )
{
Handle(_pyObject) obj = new _pySelfEraser( theCommand );
- if ( !myObjects.insert( make_pair( obj->GetID(), obj )).second )
+ if ( !AddObject( obj ) )
theCommand->Clear(); // already created
}
// Concatenate( [mesh1, ...], ... )
static TStringSet smeshpyMethods;
if ( smeshpyMethods.empty() ) {
const char * names[] =
- { "SetEmbeddedMode","IsEmbeddedMode","SetCurrentStudy","GetCurrentStudy",
+ { "SetEmbeddedMode","IsEmbeddedMode","UpdateStudy","GetStudy",
"GetPattern","GetSubShapesId",
"" }; // <- mark of array end
smeshpyMethods.Insert( names );
id_hyp->second->GetCreationCmd()->SetObject( SMESH_2smeshpy::GenName() );
}
- // Flush other objects
- for ( id_obj = myObjects.begin(); id_obj != myObjects.end(); ++id_obj )
- if ( ! id_obj->second.IsNull() )
- id_obj->second->Flush();
+ // Flush other objects. 2 times, for objects depending on Flush() of later created objects
+ std::list< Handle(_pyObject) >::reverse_iterator robj = myOrderedObjects.rbegin();
+ for ( ; robj != myOrderedObjects.rend(); ++robj )
+ if ( ! robj->IsNull() )
+ (*robj)->Flush();
+ std::list< Handle(_pyObject) >::iterator obj = myOrderedObjects.begin();
+ for ( ; obj != myOrderedObjects.end(); ++obj )
+ if ( ! obj->IsNull() )
+ (*obj)->Flush();
myLastCommand->SetOrderNb( ++myNbCommands );
myCommands.push_back( myLastCommand );
void _pyGen::PlaceSubmeshAfterItsCreation( Handle(_pyCommand) theCmdUsingSubmesh ) const
{
- map< _pyID, Handle(_pyObject) >::const_iterator id_obj = myObjects.begin();
- for ( ; id_obj != myObjects.end(); ++id_obj )
- {
- if ( !id_obj->second->IsKind( STANDARD_TYPE( _pySubMesh ))) continue;
- for ( int iArg = theCmdUsingSubmesh->GetNbArgs(); iArg; --iArg )
- {
- const _pyID& arg = theCmdUsingSubmesh->GetArg( iArg );
- if ( arg.IsEmpty() || arg.Value( 1 ) == '"' || arg.Value( 1 ) == '\'' )
- continue;
- list< _pyID > idList = theCmdUsingSubmesh->GetStudyEntries( arg );
- list< _pyID >::iterator id = idList.begin();
- for ( ; id != idList.end(); ++id )
- if ( id_obj->first == *id )
- // _pySubMesh::Process() does what we need
- Handle(_pySubMesh)::DownCast( id_obj->second )->Process( theCmdUsingSubmesh );
- }
- }
+ // map< _pyID, Handle(_pyObject) >::const_iterator id_obj = myObjects.begin();
+ // for ( ; id_obj != myObjects.end(); ++id_obj )
+ // {
+ // if ( !id_obj->second->IsKind( STANDARD_TYPE( _pySubMesh ))) continue;
+ // for ( int iArg = theCmdUsingSubmesh->GetNbArgs(); iArg; --iArg )
+ // {
+ // const _pyID& arg = theCmdUsingSubmesh->GetArg( iArg );
+ // if ( arg.IsEmpty() || arg.Value( 1 ) == '"' || arg.Value( 1 ) == '\'' )
+ // continue;
+ // list< _pyID > idList = theCmdUsingSubmesh->GetStudyEntries( arg );
+ // list< _pyID >::iterator id = idList.begin();
+ // for ( ; id != idList.end(); ++id )
+ // if ( id_obj->first == *id )
+ // // _pySubMesh::Process() does what we need
+ // Handle(_pySubMesh)::DownCast( id_obj->second )->Process( theCmdUsingSubmesh );
+ // }
+ // }
}
//================================================================================
/*!
- * \brief Clean commmands of removed objects depending on myIsPublished flag
+ * \brief Clean commands of removed objects depending on myIsPublished flag
*/
//================================================================================
if ( !id_hyp->second.IsNull() )
id_hyp->second->ClearCommands();
- map< _pyID, Handle(_pyObject) >::iterator id_obj = myObjects.begin();
- for ( ; id_obj != myObjects.end(); ++id_obj )
- id_obj->second->ClearCommands();
+ // Other objects. 2 times, for objects depending on ClearCommands() of later created objects
+ std::list< Handle(_pyObject) >::reverse_iterator robj = myOrderedObjects.rbegin();
+ for ( ; robj != myOrderedObjects.rend(); ++robj )
+ if ( ! robj->IsNull() )
+ (*robj)->ClearCommands();
+ std::list< Handle(_pyObject) >::iterator obj = myOrderedObjects.begin();
+ for ( ; obj != myOrderedObjects.end(); ++obj )
+ if ( ! obj->IsNull() )
+ (*obj)->ClearCommands();
}
//================================================================================
myHypos.clear();
myFile2ExportedMesh.clear();
+
+ //myKeepAgrCmdsIDs.Print();
}
//================================================================================
/*!
* \brief Add access method to mesh that is an argument
- * \param theCmd - command to add access method
- * \retval bool - true if added
+ * \param theCmd - command to add access method
+ * \retval bool - true if added
*/
//================================================================================
//================================================================================
/*!
* \brief Add access method to algo that is an object or an argument
- * \param theCmd - command to add access method
- * \retval bool - true if added
+ * \param theCmd - command to add access method
+ * \retval bool - true if added
*/
//================================================================================
//================================================================================
/*!
* \brief Find hypothesis by ID (entry)
- * \param theHypID - The hypothesis ID
- * \retval Handle(_pyHypothesis) - The found hypothesis
+ * \param theHypID - The hypothesis ID
+ * \retval Handle(_pyHypothesis) - The found hypothesis
*/
//================================================================================
//================================================================================
/*!
* \brief Find algorithm able to create a hypothesis
- * \param theGeom - The shape ID the algorithm was created on
- * \param theMesh - The mesh ID that created the algorithm
- * \param theHypothesis - The hypothesis the algorithm sould be able to create
- * \retval Handle(_pyHypothesis) - The found algo
+ * \param theGeom - The shape ID the algorithm was created on
+ * \param theMesh - The mesh ID that created the algorithm
+ * \param theHypothesis - The hypothesis the algorithm should be able to create
+ * \retval Handle(_pyHypothesis) - The found algo
*/
//================================================================================
//================================================================================
/*!
* \brief Find subMesh by ID (entry)
- * \param theSubMeshID - The subMesh ID
- * \retval Handle(_pySubMesh) - The found subMesh
+ * \param theSubMeshID - The subMesh ID
+ * \retval Handle(_pySubMesh) - The found subMesh
*/
//================================================================================
//================================================================================
/*!
* \brief Change order of commands in the script
- * \param theCmd1 - One command
- * \param theCmd2 - Another command
+ * \param theCmd1 - One command
+ * \param theCmd2 - Another command
*/
//================================================================================
int nb1 = theCmd1->GetOrderNb();
theCmd1->SetOrderNb( theCmd2->GetOrderNb() );
theCmd2->SetOrderNb( nb1 );
-// cout << "BECOME " << theCmd1->GetOrderNb() << "\t" << theCmd1->GetString() << endl
-// << "BECOME " << theCmd2->GetOrderNb() << "\t" << theCmd2->GetString() << endl << endl;
+ // cout << "BECOME " << theCmd1->GetOrderNb() << "\t" << theCmd1->GetString() << endl
+ // << "BECOME " << theCmd2->GetOrderNb() << "\t" << theCmd2->GetString() << endl << endl;
}
//================================================================================
/*!
* \brief Set one command after the other
- * \param theCmd - Command to move
- * \param theAfterCmd - Command ater which to insert the first one
+ * \param theCmd - Command to move
+ * \param theAfterCmd - Command ater which to insert the first one
*/
//================================================================================
//================================================================================
/*!
* \brief Set one command before the other
- * \param theCmd - Command to move
- * \param theBeforeCmd - Command before which to insert the first one
+ * \param theCmd - Command to move
+ * \param theBeforeCmd - Command before which to insert the first one
*/
//================================================================================
//================================================================================
/*!
* \brief Set one command before or after the other
- * \param theCmd - Command to move
- * \param theOtherCmd - Command ater or before which to insert the first one
+ * \param theCmd - Command to move
+ * \param theOtherCmd - Command ater or before which to insert the first one
*/
//================================================================================
// void _pyGen::addFilterUser( Handle(_pyCommand)& theCommand, const Handle(_pyObject)& user )
// {
- // No more needed after adding _pyObject::myArgCommands
+// No more needed after adding _pyObject::myArgCommands
// const char filterPrefix[] = "aFilter0x";
// if ( theCommand->GetString().Search( filterPrefix ) < 1 )
//================================================================================
/*!
* \brief Set command be last in list of commands
- * \param theCmd - Command to be last
+ * \param theCmd - Command to be last
*/
//================================================================================
//================================================================================
/*!
* \brief Set method to access to object wrapped with python class
- * \param theID - The wrapped object entry
- * \param theMethod - The accessor method
+ * \param theID - The wrapped object entry
+ * \param theMethod - The accessor method
*/
//================================================================================
//================================================================================
/*!
* \brief Generated new ID for object and assign with existing name
- * \param theID - ID of existing object
+ * \param theID - ID of existing object
*/
//================================================================================
}
while ( myObjectNames.IsBound( aNewID ) );
- myObjectNames.Bind( aNewID, myObjectNames.IsBound( theID )
- ? (myObjectNames.Find( theID ) + _pyID( "_" ) + _pyID( index-1 ))
- : _pyID( "A" ) + aNewID );
+ if ( myObjectNames.IsBound( theID ) )
+ myObjectNames.Bind( aNewID, ( myObjectNames.Find( theID ) + _pyID( "_" ) + _pyID( index-1 ) ) );
+ else
+ myObjectNames.Bind( aNewID, ( _pyID( "A" ) + aNewID ) );
return aNewID;
}
*/
//================================================================================
-void _pyGen::AddObject( Handle(_pyObject)& theObj )
+bool _pyGen::AddObject( Handle(_pyObject)& theObj )
{
- if ( theObj.IsNull() ) return;
+ if ( theObj.IsNull() ) return false;
CheckObjectIsReCreated( theObj );
- if ( theObj->IsKind( STANDARD_TYPE( _pyMesh )))
- myMeshes.insert( make_pair( theObj->GetID(), Handle(_pyMesh)::DownCast( theObj )));
-
- else if ( theObj->IsKind( STANDARD_TYPE( _pyMeshEditor )))
- myMeshEditors.insert( make_pair( theObj->GetID(), Handle(_pyMeshEditor)::DownCast( theObj )));
+ bool add;
- else
- myObjects.insert( make_pair( theObj->GetID(), theObj ));
+ if ( theObj->IsKind( STANDARD_TYPE( _pyMesh ))) {
+ add = myMeshes.insert( make_pair( theObj->GetID(),
+ Handle(_pyMesh)::DownCast( theObj ))).second;
+ }
+ else if ( theObj->IsKind( STANDARD_TYPE( _pyMeshEditor ))) {
+ add = myMeshEditors.insert( make_pair( theObj->GetID(),
+ Handle(_pyMeshEditor)::DownCast( theObj ))).second;
+ }
+ else {
+ add = myObjects.insert( make_pair( theObj->GetID(), theObj )).second;
+ if ( add ) myOrderedObjects.push_back( theObj );
+ }
+ return add;
}
//================================================================================
return;
const bool isHyp = theObj->IsKind( STANDARD_TYPE( _pyHypothesis ));
- Handle(_pyObject) existing =
- isHyp ? FindHyp( theObj->GetID() ) : FindObject( theObj->GetID() );
+ Handle(_pyObject) existing;
+ if( isHyp )
+ existing = FindHyp( theObj->GetID() );
+ else
+ existing = FindObject( theObj->GetID() );
if ( !existing.IsNull() && existing != theObj )
{
existing->SetRemovedFromStudy( true );
return id_obj->second;
}
{
- map< _pyID, Handle(_pyMesh) >::const_iterator id_obj = myMeshes.find( theObjID );
+ _pyGen* me = const_cast< _pyGen* >( this );
+ map< _pyID, Handle(_pyMesh) >::iterator id_obj = me->myMeshes.find( theObjID );
if ( id_obj != myMeshes.end() )
return id_obj->second;
}
// either the SMESH object is not in study or it is a GEOM object
if ( IsGeomObject( theObjID ))
{
- SALOMEDS::SObject_wrap so = myStudy->FindObjectID( theObjID.ToCString() );
+ SALOMEDS::SObject_wrap so = SMESH_Gen_i::getStudyServant()->FindObjectID( theObjID.ToCString() );
if ( so->_is_nil() ) return true;
CORBA::Object_var obj = so->GetObject();
return CORBA::is_nil( obj );
//================================================================================
/*!
* \brief Convert an IDL API command of SMESH::SMESH_Mesh to a method call of python Mesh
- * \param theCommand - Engine method called for this mesh
+ * \param theCommand - Engine method called for this mesh
*/
//================================================================================
list< Handle(_pyHypothesis) >::iterator hyp;
if ( !myLastComputeCmd.IsNull() )
{
- for ( hyp = myHypos.begin(); hyp != myHypos.end(); ++hyp )
- (*hyp)->ComputeDiscarded( myLastComputeCmd );
+ // check if the previously computed mesh has been edited,
+ // if so then we do not clear the previous Compute()
+ bool toClear = true;
+ if ( myLastComputeCmd->GetMethod() == "Compute" )
+ {
+ list< Handle(_pyMeshEditor)>::iterator e = myEditors.begin();
+ for ( ; e != myEditors.end() && toClear; ++e )
+ {
+ list< Handle(_pyCommand)>& cmds = (*e)->GetProcessedCmds();
+ list< Handle(_pyCommand) >::reverse_iterator cmd = cmds.rbegin();
+ if ( cmd != cmds.rend() &&
+ (*cmd)->GetOrderNb() > myLastComputeCmd->GetOrderNb() )
+ toClear = false;
+ }
+ }
+ if ( toClear )
+ {
+ // clear hyp commands called before myLastComputeCmd
+ for ( hyp = myHypos.begin(); hyp != myHypos.end(); ++hyp )
+ (*hyp)->ComputeDiscarded( myLastComputeCmd );
- myLastComputeCmd->Clear();
+ myLastComputeCmd->Clear();
+ }
}
myLastComputeCmd = theCommand;
}
}
// ----------------------------------------------------------------------
- else if ( method == "GetSubMesh" ) { // collect submeshes of the mesh
+ else if ( method == "GetSubMesh" ) { // collect sub-meshes of the mesh
Handle(_pySubMesh) subMesh = theGen->FindSubMesh( theCommand->GetResultValue() );
if ( !subMesh.IsNull() ) {
subMesh->SetCreator( this );
}
}
// ----------------------------------------------------------------------
+ else if ( method == "GetSubMeshes" ) { // clear as the command does nothing (0023156)
+ theCommand->Clear();
+ }
+ // ----------------------------------------------------------------------
else if ( method == "AddHypothesis" ) { // mesh.AddHypothesis(geom, HYPO )
myAddHypCmds.push_back( theCommand );
// set mesh to hypo
// ----------------------------------------------------------------------
else if ( method == "CreateGroup" ||
method == "CreateGroupFromGEOM" ||
- method == "CreateGroupFromFilter" )
+ method == "CreateGroupFromFilter" ||
+ method == "CreateDimGroup" )
{
Handle(_pyGroup) group = new _pyGroup( theCommand );
myGroups.push_back( group );
TCollection_AsciiString grIDs = theCommand->GetResultValue();
list< _pyID > idList = theCommand->GetStudyEntries( grIDs );
list< _pyID >::iterator grID = idList.begin();
- const int nbGroupsBefore = myGroups.size();
+ const size_t nbGroupsBefore = myGroups.size();
Handle(_pyObject) obj;
for ( ; grID != idList.end(); ++grID )
{
// ----------------------------------------------------------------------
else if ( theCommand->MethodStartsFrom( "Export" ))
{
- if ( method == "ExportToMED" || // ExportToMED() --> ExportMED()
- method == "ExportToMEDX" ) // ExportToMEDX() --> ExportMED()
+ if ( method == "ExportToMED" || // ExportToMED() --> ExportMED()
+ method == "ExportToMEDX" || // ExportToMEDX() --> ExportMED()
+ method == "ExportMED" )
{
theCommand->SetMethod( "ExportMED" );
- if ( theCommand->GetNbArgs() == 5 )
+ // filter out deprecated version parameter
+ vector< _AString > args;
+ for ( int i = 1; i <= theCommand->GetNbArgs(); i++ ) {
+ if ( !_FilterArg( theCommand->GetArg( i ) ) )
+ args.push_back( theCommand->GetArg( i ) );
+ }
+ theCommand->RemoveArgs();
+ for ( unsigned int i = 0; i < args.size(); i++ )
+ theCommand->SetArg( i+1, args[i] );
+ if ( theCommand->GetNbArgs() == 4 )
{
// ExportToMEDX(...,autoDimension) -> ExportToMEDX(...,meshPart=None,autoDimension)
- _AString autoDimension = theCommand->GetArg( 5 );
- theCommand->SetArg( 5, "None" );
- theCommand->SetArg( 6, autoDimension );
+ _AString autoDimension = theCommand->GetArg( 4 );
+ theCommand->SetArg( 4, "None" );
+ theCommand->SetArg( 5, autoDimension );
}
}
else if ( method == "ExportCGNS" )
//
// remove "PartTo" from the method
TCollection_AsciiString newMethod = method;
- newMethod.Remove( 7, 6 );
+ newMethod.Remove( /*where=*/7, /*howmany=*/6 );
theCommand->SetMethod( newMethod );
- // make the 1st arg be the last one (or last but one for ExportMED())
- _pyID partID = theCommand->GetArg( 1 );
- int nbArgs = theCommand->GetNbArgs() - (newMethod == "ExportMED");
- for ( int i = 2; i <= nbArgs; ++i )
- theCommand->SetArg( i-1, theCommand->GetArg( i ));
- theCommand->SetArg( nbArgs, partID );
+ // replace version parameter by minor
+ std::list< _AString > args;
+ for ( int i = 1; i <= theCommand->GetNbArgs(); i++ ) {
+ if ( _FilterArg( theCommand->GetArg( i )))
+ args.push_back( "minor=0");
+ else
+ args.push_back( theCommand->GetArg( i ));
+ }
+ // check the 1st arg meshPart, it must be SMESH_IDSource
+ _AString meshPart = args.front();
+ if ( _pyCommand::IsStudyEntry( meshPart ) ||
+ meshPart.Search( "Filter" ) > 0 ||
+ meshPart.Search( "GetIDSource" ) > 0 ||
+ meshPart.Search( "meshPart" ) > 0 )
+ {
+ // set the 1st arg meshPart
+ // - to 5th place for ExportMED command
+ // - to last place for the rest commands
+ std::list< _AString >::iterator newPos = args.end();
+ if ( newMethod == "ExportMED" )
+ std::advance( newPos = args.begin(), 5 );
+ args.splice( newPos, args, args.begin() );
+ }
+ std::list< _AString >::iterator a = args.begin();
+ for ( unsigned int i = 1; a != args.end(); ++i, ++a )
+ theCommand->SetArg( i, *a );
}
// remember file name
theGen->AddExportedMesh( theCommand->GetArg( 1 ),
{
addCmd = *cmd;
cmd = addHypCmds.erase( cmd );
- if ( !theGen->IsToKeepAllCommands() ) {
+ if ( !theGen->IsToKeepAllCommands() /*&& CanClear()*/ ) {
addCmd->Clear();
theCommand->Clear();
}
+ else
+ {
+ // mesh.AddHypothesis(geom, hyp) --> mesh.AddHypothesis(hyp, geom=0)
+ addCmd->RemoveArgs();
+ addCmd->SetArg( 1, hypID );
+ if ( isLocal )
+ addCmd->SetArg( 2, geomID );
+ }
}
else
{
else if ( method == "GetMeshOrder" || method == "SetMeshOrder" )
{
// make commands GetSubMesh() returning sub-meshes be before using sub-meshes
- // by GetMeshOrder() and SetMeshOrder(), since by defalut GetSubMesh()
+ // by GetMeshOrder() and SetMeshOrder(), since by default GetSubMesh()
// commands are moved at the end of the script
TCollection_AsciiString subIDs =
( method == "SetMeshOrder" ) ? theCommand->GetArg(1) : theCommand->GetResultValue();
if ( sameMethods.empty() ) {
const char * names[] =
{ "ExportDAT","ExportUNV","ExportSTL","ExportSAUV", "RemoveGroup","RemoveGroupWithContents",
- "GetGroups","UnionGroups","IntersectGroups","CutGroups","GetLog","GetId","ClearLog",
- "GetStudyId","HasDuplicatedGroupNamesMED","GetMEDMesh","NbNodes","NbElements",
+ "GetGroups","UnionGroups","IntersectGroups","CutGroups","CreateDimGroup","GetLog","GetId",
+ "ClearLog","HasDuplicatedGroupNamesMED","GetMEDMesh","NbNodes","NbElements",
"NbEdges","NbEdgesOfOrder","NbFaces","NbFacesOfOrder","NbTriangles",
"NbTrianglesOfOrder","NbQuadrangles","NbQuadranglesOfOrder","NbPolygons","NbVolumes",
"NbVolumesOfOrder","NbTetras","NbTetrasOfOrder","NbHexas","NbHexasOfOrder",
"GetSubMeshElementsId","GetSubMeshNodesId","GetSubMeshElementType","Dump","GetNodeXYZ",
"GetNodeInverseElements","GetShapeID","GetShapeIDForElem","GetElemNbNodes",
"GetElemNode","IsMediumNode","IsMediumNodeOfAnyElem","ElemNbEdges","ElemNbFaces",
+ "GetElemFaceNodes", "GetFaceNormal", "FindElementByNodes",
"IsPoly","IsQuadratic","BaryCenter","GetHypothesisList", "SetAutoColor", "GetAutoColor",
"Clear", "ConvertToStandalone", "GetMeshOrder", "SetMeshOrder"
,"" }; // <- mark of end
for ( ; m != fatherMeshes.end(); ++m )
addFatherMesh( *m );
// if ( removedGeom )
- // SetRemovedFromStudy(); // as reffered geometry not in study
+ // SetRemovedFromStudy(); // as referred geometry not in study
}
if ( myGeomNotInStudy )
return;
"AddNode","Add0DElement","AddEdge","AddFace","AddPolygonalFace","AddBall",
"AddVolume","AddPolyhedralVolume","AddPolyhedralVolumeByFaces",
"MoveNode", "MoveClosestNodeToPoint",
- "InverseDiag","DeleteDiag","Reorient","ReorientObject",
+ "InverseDiag","DeleteDiag","Reorient","ReorientObject","Reorient2DBy3D",
"TriToQuad","TriToQuadObject", "QuadTo4Tri", "SplitQuad","SplitQuadObject",
"BestSplit","Smooth","SmoothObject","SmoothParametric","SmoothParametricObject",
"ConvertToQuadratic","ConvertFromQuadratic","RenumberNodes","RenumberElements",
"RotationSweep","RotationSweepObject","RotationSweepObject1D","RotationSweepObject2D",
"ExtrusionSweep","AdvancedExtrusion","ExtrusionSweepObject","ExtrusionSweepObject1D",
- "ExtrusionSweepObject2D","ExtrusionAlongPath","ExtrusionAlongPathObject",
+ "ExtrusionByNormal", "ExtrusionSweepObject2D","ExtrusionAlongPath","ExtrusionAlongPathObject",
"ExtrusionAlongPathX","ExtrusionAlongPathObject1D","ExtrusionAlongPathObject2D",
+ "ExtrusionSweepObjects","RotationSweepObjects","ExtrusionAlongPathObjects",
"Mirror","MirrorObject","Translate","TranslateObject","Rotate","RotateObject",
- "FindCoincidentNodes","MergeNodes","FindEqualElements",
+ "FindCoincidentNodes","MergeNodes","FindEqualElements","FillHole",
"MergeElements","MergeEqualElements","SewFreeBorders","SewConformFreeBorders",
+ "FindCoincidentFreeBorders", "SewCoincidentFreeBorders",
"SewBorderToSide","SewSideElements","ChangeElemNodes","GetLastCreatedNodes",
- "GetLastCreatedElems",
+ "GetLastCreatedElems", "FaceGroupsSeparatedByEdges",
"MirrorMakeMesh","MirrorObjectMakeMesh","TranslateMakeMesh","TranslateObjectMakeMesh",
"Scale","ScaleMakeMesh","RotateMakeMesh","RotateObjectMakeMesh","MakeBoundaryMesh",
- "MakeBoundaryElements", "SplitVolumesIntoTetra",
+ "MakeBoundaryElements", "SplitVolumesIntoTetra","SplitHexahedraIntoPrisms",
"DoubleElements","DoubleNodes","DoubleNode","DoubleNodeGroup","DoubleNodeGroups",
- "DoubleNodeElem","DoubleNodeElemInRegion","DoubleNodeElemGroup",
+ "DoubleNodeElem","DoubleNodeElemInRegion","DoubleNodeElemGroup","AffectedElemGroupsInRegion",
"DoubleNodeElemGroupInRegion","DoubleNodeElemGroups","DoubleNodeElemGroupsInRegion",
"DoubleNodesOnGroupBoundaries","CreateFlatElementsOnFacesGroups","CreateHoleSkin"
,"" }; // <- mark of the end
//================================================================================
/*!
* \brief _pyHypothesis constructor
- * \param theCreationCmd -
+ * \param theCreationCmd -
*/
//================================================================================
//================================================================================
/*!
* \brief Creates algorithm or hypothesis
- * \param theCreationCmd - The engine command creating a hypothesis
- * \retval Handle(_pyHypothesis) - Result _pyHypothesis
+ * \param theCreationCmd - The engine command creating a hypothesis
+ * \retval Handle(_pyHypothesis) - Result _pyHypothesis
*/
//================================================================================
hyp->SetConvMethodAndType( "SetGrid", "Cartesian_3D");
for ( int iArg = 0; iArg < 4; ++iArg )
hyp->setCreationArg( iArg+1, "[]");
+ hyp->AddAccumulativeMethod( "SetGrid" );
+ hyp->AddAccumulativeMethod( "SetGridSpacing" );
}
else
{
//================================================================================
/*!
* \brief Convert the command adding a hypothesis to mesh into a smesh command
- * \param theCmd - The command like mesh.AddHypothesis( geom, hypo )
- * \param theAlgo - The algo that can create this hypo
- * \retval bool - false if the command cant be converted
+ * \param theCmd - The command like mesh.AddHypothesis( geom, hypo )
+ * \param theAlgo - The algo that can create this hypo
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
//================================================================================
/*!
* \brief Remember hypothesis parameter values
- * \param theCommand - The called hypothesis method
+ * \param theCommand - The called hypothesis method
*/
//================================================================================
myArgCommands.push_back( theCommand );
usedCommand = true;
while ( crMethod.myArgs.size() < i+1 )
- crMethod.myArgs.push_back( "[]" );
+ crMethod.myArgs.push_back( "None" );
crMethod.myArgs[ i ] = theCommand->GetArg( crMethod.myArgNb[i] );
}
}
//================================================================================
/*!
- * \brief clear creation, arg and unkown commands
+ * \brief clear creation, arg and unknown commands
*/
//================================================================================
// parameters are discriminated by method name
_AString method = theCommand->GetMethod();
if ( myAccumulativeMethods.count( method ))
- return; // this method adds values and not override the previus value
+ return; // this method adds values and not override the previous value
// discriminate commands setting different parameters via one method
// by passing parameter names like e.g. SetOption("size", "0.2")
{
if ( myCurCrMethod )
{
- while ( myCurCrMethod->myArgs.size() < argNb )
+ while ( (int) myCurCrMethod->myArgs.size() < argNb )
myCurCrMethod->myArgs.push_back( "None" );
if ( arg.IsEmpty() )
myCurCrMethod->myArgs[ argNb-1 ] = "None";
//================================================================================
/*!
* \brief Remember hypothesis parameter values
- * \param theCommand - The called hypothesis method
+ * \param theCommand - The called hypothesis method
*/
//================================================================================
{
// CartesianParameters3D hyp
- if ( theCommand->GetMethod() == "SetSizeThreshold" )
+ if ( theCommand->GetMethod() == "SetSizeThreshold" ||
+ theCommand->GetMethod() == "SetToAddEdges" )
{
- setCreationArg( 4, theCommand->GetArg( 1 ));
+ int iEdges = ( theCommand->GetMethod().Value( 4 ) == 'T' );
+ setCreationArg( 4+iEdges, theCommand->GetArg( 1 ));
myArgCommands.push_back( theCommand );
return;
}
myCurCrMethod->myArgs[ iArg ] += "]";
}
myArgCommands.push_back( theCommand );
- rememberCmdOfParameter( theCommand );
+ //rememberCmdOfParameter( theCommand ); -- these commands are marked as
+ // accumulative, else, if the creation
+ // is not converted, commands for axes 1 and 2 are lost
return;
}
}
for ( ; type2meth != myAlgoType2CreationMethod.end(); ++type2meth )
{
CreationMethod& crMethod = type2meth->second;
- while ( crMethod.myArgs.size() < i+1 )
- crMethod.myArgs.push_back( "[]" );
- crMethod.myArgs[ i ] = theCommand->GetArg( 1 ); // arg value
+ while ( (int) crMethod.myArgs.size() < i+1 )
+ crMethod.myArgs.push_back( "[]" );
+ crMethod.myArgs[ i ] = theCommand->GetArg( 1 ); // arg value
}
myArgCommands.push_back( theCommand );
}
void _pyComplexParamHypo::Flush()
{
+ list < Handle(_pyCommand) >::iterator cmd;
if ( IsWrapped() )
{
- list < Handle(_pyCommand) >::iterator cmd = myUnusedCommands.begin();
- for ( ; cmd != myUnusedCommands.end(); ++cmd )
+ for ( cmd = myUnusedCommands.begin(); cmd != myUnusedCommands.end(); ++cmd )
if ((*cmd)->GetMethod() == "SetObjectEntry" )
(*cmd)->Clear();
}
+
+ // if ( GetAlgoType() == "Cartesian_3D" )
+ // {
+ // _pyID algo = myCreationCmd->GetObject();
+ // for ( cmd = myProcessedCmds.begin(); cmd != myProcessedCmds.end(); ++cmd )
+ // {
+ // if ( IsWrapped() )
+ // {
+ // StructToList( *cmd, /*checkMethod=*/false );
+ // const _AString & method = (*cmd)->GetMethod();
+ // if ( method == "SetFixedPoint" )
+ // (*cmd)->SetObject( algo );
+ // }
+ // }
+ // }
}
//================================================================================
/*!
* \brief Convert methods of 1D hypotheses to my own methods
- * \param theCommand - The called hypothesis method
+ * \param theCommand - The called hypothesis method
*/
//================================================================================
//================================================================================
/*!
* \brief
- * \param theAdditionCmd - command to be converted
- * \param theMesh - mesh instance
- * \retval bool - status
+ * \param theAdditionCmd - command to be converted
+ * \param theMesh - mesh instance
+ * \retval bool - status
*/
//================================================================================
//================================================================================
/*!
* \brief additionally to Addition2Creation, clears SetDistrType() command
- * \param theCmd - AddHypothesis() command
- * \param theMesh - mesh to which a hypothesis is added
- * \retval bool - convertion result
+ * \param theCmd - AddHypothesis() command
+ * \param theMesh - mesh to which a hypothesis is added
+ * \retval bool - conversion result
*/
//================================================================================
/*!
* \brief Convert the command adding "SegmentLengthAroundVertex" to mesh
* into regular1D.LengthNearVertex( length, vertex )
- * \param theCmd - The command like mesh.AddHypothesis( vertex, SegmentLengthAroundVertex )
- * \param theMesh - The mesh needing this hypo
- * \retval bool - false if the command cant be converted
+ * \param theCmd - The command like mesh.AddHypothesis( vertex, SegmentLengthAroundVertex )
+ * \param theMesh - The mesh needing this hypo
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
_pyID vertex = theCmd->GetArg( 1 );
- // the problem here is that segment algo will not be found
+ // the problem here is that segment algo can be not found
// by pyHypothesis::Addition2Creation() for <vertex>, so we try to find
// geometry where segment algorithm is assigned
- Handle(_pyHypothesis) algo;
_pyID geom = vertex;
+ Handle(_pyHypothesis) algo = theGen->FindAlgo( geom, theMeshID, this );
while ( algo.IsNull() && !geom.IsEmpty()) {
// try to find geom as a father of <vertex>
geom = FatherID( geom );
algo = theGen->FindAlgo( geom, theMeshID, this );
}
- if ( algo.IsNull() )
+ if ( algo.IsNull() || geom.IsEmpty() )
return false; // also possible to find geom as brother of veretex...
+
// set geom instead of vertex
theCmd->SetArg( 1, geom );
- // set vertex as a second arg
- if ( myCurCrMethod->myArgs.size() < 1) setCreationArg( 1, "1" ); // :(
- setCreationArg( 2, vertex );
-
// mesh.AddHypothesis(vertex, SegmentLengthAroundVertex) -->
- // theMeshID.LengthNearVertex( length, vertex )
- return _pyHypothesis::Addition2Creation( theCmd, theMeshID );
+ // SegmentLengthAroundVertex = Regular_1D.LengthNearVertex( length )
+ if ( _pyHypothesis::Addition2Creation( theCmd, theMeshID ))
+ {
+ // set vertex as a second arg
+ theCmd->SetArg( 2, vertex );
+
+ return true;
+ }
}
return false;
}
//================================================================================
/*!
* \brief _pyAlgorithm constructor
- * \param theCreationCmd - The command like "algo = smeshgen.CreateHypothesis(type,lib)"
+ * \param theCreationCmd - The command like "algo = smeshgen.CreateHypothesis(type,lib)"
*/
//================================================================================
//================================================================================
/*!
* \brief Convert the command adding an algorithm to mesh
- * \param theCmd - The command like mesh.AddHypothesis( geom, algo )
- * \param theMesh - The mesh needing this algo
- * \retval bool - false if the command cant be converted
+ * \param theCmd - The command like mesh.AddHypothesis( geom, algo )
+ * \param theMesh - The mesh needing this algo
+ * \retval bool - false if the command can't be converted
*/
//================================================================================
//================================================================================
/*!
* \brief Return starting position of a part of python command
- * \param thePartIndex - The index of command part
- * \retval int - Part position
+ * \param thePartIndex - The index of command part
+ * \retval int - Part position
*/
//================================================================================
-int _pyCommand::GetBegPos( int thePartIndex )
+int _pyCommand::GetBegPos( int thePartIndex ) const
{
if ( IsEmpty() )
return EMPTY;
//================================================================================
/*!
* \brief Store starting position of a part of python command
- * \param thePartIndex - The index of command part
- * \param thePosition - Part position
+ * \param thePartIndex - The index of command part
+ * \param thePosition - Part position
*/
//================================================================================
//================================================================================
/*!
* \brief Returns whitespace symbols at the line beginning
- * \retval TCollection_AsciiString - result
+ * \retval TCollection_AsciiString - result
*/
//================================================================================
TCollection_AsciiString _pyCommand::GetIndentation()
{
int end = 1;
- if ( GetBegPos( RESULT_IND ) == UNKNOWN )
- GetWord( myString, end, true );
- else
- end = GetBegPos( RESULT_IND );
- return myString.SubString( 1, end - 1 );
+ //while ( end <= Length() && isblank( myString.Value( end )))
+ //ANA: isblank() function isn't provided in VC2010 compiler
+ while ( end <= Length() && ( myString.Value( end ) == ' ' || myString.Value( end ) == '\t') )
+ ++end;
+ return ( end == 1 ) ? _AString("") : myString.SubString( 1, end - 1 );
}
//================================================================================
/*!
* \brief Return substring of python command looking like ResultValue = Obj.Meth()
- * \retval const TCollection_AsciiString & - ResultValue substring
+ * \retval const TCollection_AsciiString & - ResultValue substring
*/
//================================================================================
int _pyCommand::GetNbResultValues()
{
- int nb = 0;
- int begPos = 1;
- int endPos = myString.Location( "=", 1, Length() );
- while ( begPos < endPos )
- {
- _AString str = GetWord( myString, begPos, true );
- begPos = begPos+ str.Length();
- nb++;
- }
- return (nb-1);
+ GetResultValue(1);
+ return myResults.Length();
}
* \retval const TCollection_AsciiString & - ResultValue with res index substring
*/
//================================================================================
-TCollection_AsciiString _pyCommand::GetResultValue(int res)
+const _AString& _pyCommand::GetResultValue(int res)
{
- int begPos = 1;
- if ( SkipSpaces( myString, begPos ) && myString.Value( begPos ) == '[' )
- ++begPos; // skip [, else the whole list is returned
- int endPos = myString.Location( "=", 1, Length() );
- int Nb=0;
- while ( begPos < endPos) {
- _AString result = GetWord( myString, begPos, true );
- begPos = begPos + result.Length();
- Nb++;
- if(res == Nb) {
- result.RemoveAll('[');
- result.RemoveAll(']');
- return result;
+ if ( GetResultValue().IsEmpty() )
+ return theEmptyString;
+
+ if ( myResults.IsEmpty() )
+ {
+ int begPos = 1;
+ if ( SkipSpaces( myRes, begPos ) && myRes.Value( begPos ) == '[' )
+ ++begPos; // skip [, else the whole list is returned
+ while ( begPos < myRes.Length() ) {
+ _AString result = GetWord( myRes, begPos, true );
+ begPos += result.Length();
+ // if(res == Nb) {
+ // result.RemoveAll('[');
+ // result.RemoveAll(']');
+ // return result;
+ // }
+ // if(Nb>res)
+ // break;
+ myResults.Append( result );
}
- if(Nb>res)
- break;
}
+ if ( res > 0 && res <= myResults.Length() )
+ return myResults( res );
return theEmptyString;
}
//================================================================================
/*!
* \brief Return substring of python command looking like ResVal = Object.Meth()
- * \retval const TCollection_AsciiString & - Object substring
+ * \retval const TCollection_AsciiString & - Object substring
*/
//================================================================================
if ( begPos < 1 ) {
begPos = myString.Location( "=", 1, Length() ) + 1;
// is '=' in the string argument (for example, name) or not
- int nb1 = 0; // number of ' character at the left of =
- int nb2 = 0; // number of " character at the left of =
- for ( int i = 1; i < begPos-1; i++ ) {
- if ( myString.Value( i )=='\'' )
- nb1 += 1;
- else if ( myString.Value( i )=='"' )
- nb2 += 1;
- }
- // if number of ' or " is not divisible by 2,
+ int nb[4] = { 0, 0, 0, 0 }; // number of '"() character at the left of =
+ for ( int i = 1; i < begPos-1; i++ )
+ switch ( myString.Value( i )) {
+ case '\'': nb[0]++; break;
+ case '"' : nb[1]++; break;
+ case '(' : nb[2]++; break;
+ case ')' : nb[3]++; break;
+ }
+ // if = is inside a string or a list
// then get an object at the start of the command
- if ( nb1 % 2 != 0 || nb2 % 2 != 0 )
+ if ( nb[0] % 2 != 0 || nb[1] % 2 != 0 || nb[2] != nb[3])
begPos = 1;
}
else {
//================================================================================
/*!
* \brief Return substring of python command looking like ResVal = Obj.Method()
- * \retval const TCollection_AsciiString & - Method substring
+ * \retval const TCollection_AsciiString & - Method substring
*/
//================================================================================
if ( GetBegPos( METHOD_IND ) == UNKNOWN )
{
// beginning
- int begPos = GetBegPos( OBJECT_IND ) + myObj.Length();
+ int begPos = GetBegPos( OBJECT_IND );
bool forward = true;
if ( begPos < 1 ) {
begPos = myString.Location( "(", 1, Length() ) - 1;
forward = false;
}
+ else {
+ begPos += myObj.Length();
+ }
// store
myMeth = GetWord( myString, begPos, forward );
SetBegPos( METHOD_IND, begPos );
return myMeth;
}
+//================================================================================
+/*!
+ * \brief Returns true if there are brackets after the method
+ */
+//================================================================================
+
+bool _pyCommand::IsMethodCall()
+{
+ if ( GetMethod().IsEmpty() )
+ return false;
+ const char* s = myString.ToCString() + GetBegPos( METHOD_IND ) + myMeth.Length() - 1;
+ return ( s[0] == '(' || s[1] == '(' );
+}
+
//================================================================================
/*!
* \brief Return substring of python command looking like ResVal = Obj.Meth(Arg1,...)
- * \retval const TCollection_AsciiString & - Arg<index> substring
+ * \retval const TCollection_AsciiString & - Arg<index> substring
*/
//================================================================================
return myArgs( index );
}
+//================================================================================
+/*!
+ * \brief Return position where arguments begin
+ */
+//================================================================================
+
+int _pyCommand::GetArgBeginning() const
+{
+ int pos = GetBegPos( ARG1_IND );
+ if ( pos == UNKNOWN )
+ {
+ pos = GetBegPos( METHOD_IND ) + myMeth.Length();
+ if ( pos < 1 )
+ pos = myString.Location( "(", 4, Length() ); // 4 = strlen("b.c(")
+ }
+ return pos;
+}
+
//================================================================================
/*!
* \brief Check if char is a word part
- * \param c - The character to check
- * \retval bool - The check result
+ * \param c - The character to check
+ * \retval bool - The check result
*/
//================================================================================
//================================================================================
/*!
* \brief Looks for a word in the string and returns word's beginning
- * \param theString - The input string
- * \param theStartPos - The position to start the search, returning word's beginning
- * \param theForward - The search direction
- * \retval TCollection_AsciiString - The found word
+ * \param theString - The input string
+ * \param theStartPos - The position to start the search, returning word's beginning
+ * \param theForward - The search direction
+ * \retval TCollection_AsciiString - The found word
*/
//================================================================================
//================================================================================
/*!
- * \brief Finds entries in a sting
+ * \brief Returns true if the string looks like an object ID but not like a list,
+ * string, command etc.
+ */
+//================================================================================
+
+bool _pyCommand::IsID( const TCollection_AsciiString& str )
+{
+ if ( str.Length() < 1 ) return false;
+
+ const char* s = str.ToCString();
+
+ for ( int i = 0; i < str.Length(); ++i )
+ if ( !IsIDChar( s[i] ))
+ return false;
+
+ return true;
+}
+
+//================================================================================
+/*!
+ * \brief Finds entries in a string
*/
//================================================================================
//================================================================================
/*!
* \brief Look for position where not space char is
- * \param theString - The string
- * \param thePos - The position to search from and which returns result
- * \retval bool - false if there are only space after thePos in theString
+ * \param theString - The string
+ * \param thePos - The position to search from and which returns result
+ * \retval bool - false if there are only space after thePos in theString
*/
//================================================================================
//================================================================================
/*!
* \brief Modify a part of the command
- * \param thePartIndex - The index of the part
- * \param thePart - The new part string
- * \param theOldPart - The old part
+ * \param thePartIndex - The index of the part
+ * \param thePart - The new part string
+ * \param theOldPart - The old part
*/
//================================================================================
void _pyCommand::SetPart(int thePartIndex, const TCollection_AsciiString& thePart,
- TCollection_AsciiString& theOldPart)
+ TCollection_AsciiString& theOldPart)
{
int pos = GetBegPos( thePartIndex );
if ( pos <= Length() && theOldPart != thePart)
//================================================================================
/*!
- * \brief Set agrument
- * \param index - The argument index, it counts from 1
- * \param theArg - The argument string
+ * \brief Set argument
+ * \param index - The argument index, it counts from 1
+ * \param theArg - The argument string
*/
//================================================================================
myString.Insert( i, "#" );
for ( int iPart = 1; iPart <= myBegPos.Length(); ++iPart )
{
- int begPos = GetBegPos( iPart + 1 );
- if ( begPos != UNKNOWN )
- SetBegPos( iPart + 1, begPos + 1 );
+ int begPos = GetBegPos( iPart );
+ if ( begPos != UNKNOWN && begPos != EMPTY )
+ SetBegPos( iPart, begPos + 1 );
}
}
}
//================================================================================
/*!
* \brief Insert accessor method after theObjectID
- * \param theObjectID - id of the accessed object
- * \param theAcsMethod - name of the method giving access to the object
- * \retval bool - false if theObjectID is not found in the command string
+ * \param theObjectID - id of the accessed object
+ * \param theAcsMethod - name of the method giving access to the object
+ * \retval bool - false if theObjectID is not found in the command string
*/
//================================================================================
// check that theObjectID is not just a part of a longer ID
int afterEnd = beg + theObjectID.Length();
Standard_Character c = myString.Value( afterEnd );
- if ( !isalnum( c ) && c != ':' ) {
+ if ( !IsIDChar( c ))
+ {
// check if accessor method already present
if ( c != '.' ||
myString.Location( (char*) theAcsMethod, afterEnd, Length() ) != afterEnd+1) {
added = true;
}
}
- beg = afterEnd; // is a part - next search
+ beg = afterEnd; // is a part -> next search
}
return added;
}
//================================================================================
/*!
* \brief Return method name giving access to an interaface object wrapped by python class
- * \retval const char* - method name
+ * \retval const char* - method name
*/
//================================================================================
//================================================================================
/*!
- * \brief SelfEraser erases creation command if no more it's commands invoked
+ * \brief SelfEraser erases creation command if none of it's commands invoked
+ * (e.g. filterManager) or it's not used as a command argument (e.g. a filter)
*/
//================================================================================
//================================================================================
/*!
- * \brief SelfEraser erases creation command if no more it's commands invoked
+ * \brief SelfEraser erases creation command if none of it's commands invoked
+ * (e.g. filterManager) or it's not used as a command argument (e.g. a filter)
*/
//================================================================================
-void _pySelfEraser::Flush()
+bool _pySelfEraser::CanClear()
{
bool toErase = false;
if ( myIgnoreOwnCalls ) // check if this obj is used as argument
int nbArgUses = 0;
list< Handle(_pyCommand) >::iterator cmd = myArgCmds.begin();
for ( ; cmd != myArgCmds.end(); ++cmd )
- nbArgUses += !(*cmd)->IsEmpty();
+ nbArgUses += IsAliveCmd( *cmd );
+
toErase = ( nbArgUses < 1 );
}
else
{
- int nbCalls = GetNbCalls();
- if ( nbCalls > 0 )
- {
- // ignore cleared commands
- std::list< Handle(_pyCommand) >& cmds = GetProcessedCmds();
- std::list< Handle(_pyCommand) >::const_iterator cmd = cmds.begin();
- for ( ; cmd != cmds.end(); ++cmd )
- nbCalls -= (*cmd)->IsEmpty();
- }
+ int nbCalls = 0;
+ std::list< Handle(_pyCommand) >& cmds = GetProcessedCmds();
+ std::list< Handle(_pyCommand) >::iterator cmd = cmds.begin();
+ for ( ; cmd != cmds.end(); )
+ // check of cmd emptiness is not enough as object can change
+ if (( *cmd )->GetString().Search( GetID() ) > 0 )
+ ++nbCalls, ++cmd;
+ else
+ cmd = cmds.erase( cmd ); // save the cmd from clearing
+
toErase = ( nbCalls < 1 );
}
- if ( toErase )
+ return toErase;
+}
+
+//================================================================================
+/*!
+ * \brief Check if a command is or can be cleared
+ */
+//================================================================================
+
+bool _pySelfEraser::IsAliveCmd( const Handle(_pyCommand)& theCmd )
+{
+ if ( theCmd->IsEmpty() )
+ return false;
+
+ if ( !theGen->IsToKeepAllCommands() )
+ {
+ const _pyID& objID = theCmd->GetObject();
+ Handle( _pyObject ) obj = theGen->FindObject( objID );
+ if ( !obj.IsNull() )
+ return !obj->CanClear();
+ }
+ return true;
+}
+
+//================================================================================
+/*!
+ * \brief SelfEraser erases creation command if none of it's commands invoked
+ * (e.g. filterManager) or it's not used as a command argument (e.g. a filter)
+ */
+//================================================================================
+
+void _pySelfEraser::Flush()
+{
+ if ( CanClear() )
{
myIsPublished = false;
_pyObject::ClearCommands();
*/
//================================================================================
-_pySubMesh::_pySubMesh(const Handle(_pyCommand)& theCreationCmd):
+_pySubMesh::_pySubMesh(const Handle(_pyCommand)& theCreationCmd, bool toKeepAgrCmds):
_pyObject(theCreationCmd)
{
myMesh = ObjectToMesh( theGen->FindObject( theCreationCmd->GetObject() ));
- theGen->KeepAgrCmds( GetID() ); // ask to fill myArgCmds
+ if ( toKeepAgrCmds )
+ theGen->KeepAgrCmds( GetID() ); // ask to fill myArgCmds
}
//================================================================================
bool _pySubMesh::CanBeArgOfMethod(const _AString& theMethodName)
{
return false;
-// // names of all methods where a sub-mesh can be used as argument
-// static TStringSet methods;
-// if ( methods.empty() ) {
-// const char * names[] = {
-// // methods of SMESH_Gen
-// "CopyMesh",
-// // methods of SMESH_Group
-// "AddFrom",
-// // methods of SMESH_Measurements
-// "MinDistance",
-// // methods of SMESH_Mesh
-// "ExportPartToMED","ExportCGNS","ExportPartToDAT","ExportPartToUNV","ExportPartToSTL",
-// "RemoveSubMesh",
-// // methods of SMESH_MeshEditor
-// "ReorientObject","Reorient2D","TriToQuadObject","QuadToTriObject","SplitQuadObject",
-// "SplitVolumesIntoTetra","SmoothObject","SmoothParametricObject","ConvertFromQuadraticObject",
-// "RotationSweepObject","RotationSweepObjectMakeGroups","RotationSweepObject1D",
-// "RotationSweepObject1DMakeGroups","RotationSweepObject2D","RotationSweepObject2DMakeGroups",
-// "ExtrusionSweepObject","ExtrusionSweepObjectMakeGroups","ExtrusionSweepObject0D",
-// "ExtrusionSweepObject0DMakeGroups","ExtrusionSweepObject1D","ExtrusionSweepObject2D",
-// "ExtrusionSweepObject1DMakeGroups","ExtrusionSweepObject2DMakeGroups",
-// "ExtrusionAlongPathObjX","ExtrusionAlongPathObject","ExtrusionAlongPathObjectMakeGroups",
-// "ExtrusionAlongPathObject1D","ExtrusionAlongPathObject1DMakeGroups",
-// "ExtrusionAlongPathObject2D","ExtrusionAlongPathObject2DMakeGroups","MirrorObject",
-// "MirrorObjectMakeGroups","MirrorObjectMakeMesh","TranslateObject","Scale",
-// "TranslateObjectMakeGroups","TranslateObjectMakeMesh","ScaleMakeGroups","ScaleMakeMesh",
-// "RotateObject","RotateObjectMakeGroups","RotateObjectMakeMesh","FindCoincidentNodesOnPart",
-// "FindCoincidentNodesOnPartBut","FindEqualElements","FindAmongElementsByPoint",
-// "MakeBoundaryMesh","Create0DElementsOnAllNodes",
-// "" }; // <- mark of end
-// methods.Insert( names );
-// }
-// return methods.Contains( theMethodName );
+ // names of all methods where a sub-mesh can be used as argument
+ // static TStringSet methods;
+ // if ( methods.empty() ) {
+ // const char * names[] = {
+ // // methods of SMESH_Gen
+ // "CopyMesh",
+ // // methods of SMESH_Group
+ // "AddFrom",
+ // // methods of SMESH_Measurements
+ // "MinDistance",
+ // // methods of SMESH_Mesh
+ // "ExportPartToMED","ExportCGNS","ExportPartToDAT","ExportPartToUNV","ExportPartToSTL",
+ // "RemoveSubMesh",
+ // // methods of SMESH_MeshEditor
+ // "ReorientObject","Reorient2D","TriToQuadObject","QuadToTriObject","SplitQuadObject",
+ // "SplitVolumesIntoTetra","SmoothObject","SmoothParametricObject","ConvertFromQuadraticObject",
+ // "RotationSweepObject","RotationSweepObjectMakeGroups","RotationSweepObject1D",
+ // "RotationSweepObject1DMakeGroups","RotationSweepObject2D","RotationSweepObject2DMakeGroups",
+ // "ExtrusionSweepObject","ExtrusionSweepObjectMakeGroups","ExtrusionSweepObject0D",
+ // "ExtrusionSweepObject0DMakeGroups","ExtrusionSweepObject1D","ExtrusionSweepObject2D",
+ // "ExtrusionSweepObject1DMakeGroups","ExtrusionSweepObject2DMakeGroups",
+ // "ExtrusionAlongPathObjX","ExtrusionAlongPathObject","ExtrusionAlongPathObjectMakeGroups",
+ // "ExtrusionAlongPathObject1D","ExtrusionAlongPathObject1DMakeGroups",
+ // "ExtrusionAlongPathObject2D","ExtrusionAlongPathObject2DMakeGroups","MirrorObject",
+ // "MirrorObjectMakeGroups","MirrorObjectMakeMesh","TranslateObject","Scale",
+ // "TranslateObjectMakeGroups","TranslateObjectMakeMesh","ScaleMakeGroups","ScaleMakeMesh",
+ // "RotateObject","RotateObjectMakeGroups","RotateObjectMakeMesh","FindCoincidentNodesOnPart",
+ // "FindCoincidentNodesOnPartBut","FindEqualElements","FindAmongElementsByPoint",
+ // "MakeBoundaryMesh","Create0DElementsOnAllNodes",
+ // "" }; // <- mark of end
+ // methods.Insert( names );
+ // }
+ // return methods.Contains( theMethodName );
}
//================================================================================
//================================================================================
_pyGroup::_pyGroup(const Handle(_pyCommand)& theCreationCmd, const _pyID & id)
- :_pySubMesh(theCreationCmd)
+ :_pySubMesh(theCreationCmd, /*toKeepAgrCmds=*/false)
{
if ( !id.IsEmpty() )
setID( id );
//}
//else {
// ------------------------->>>>> GroupOnGeom( geom, name, typ )
- _pyID type = theCreationCmd->GetArg( 1 );
- _pyID name = theCreationCmd->GetArg( 2 );
- theCreationCmd->SetMethod( "GroupOnGeom" );
- theCreationCmd->RemoveArgs();
- theCreationCmd->SetArg( 1, geom );
- theCreationCmd->SetArg( 2, name );
- theCreationCmd->SetArg( 3, type );
+ _pyID type = theCreationCmd->GetArg( 1 );
+ _pyID name = theCreationCmd->GetArg( 2 );
+ theCreationCmd->SetMethod( "GroupOnGeom" );
+ theCreationCmd->RemoveArgs();
+ theCreationCmd->SetArg( 1, geom );
+ theCreationCmd->SetArg( 2, name );
+ theCreationCmd->SetArg( 3, type );
//}
}
else if ( method == "CreateGroupFromFilter" )
GetCreationCmd()->GetString() = theCommand->GetString();
theCommand->Clear();
theCommand->AddDependantCmd( GetCreationCmd() );
+ // why swap? -- it's needed
+ //GetCreationCmd()->Clear();
}
else if ( theCommand->GetMethod() == "SetMesh" )
{
}
return resHyp;
}
+
+//================================================================================
+/*!
+ * \brief Adds an object ID to some family of IDs with a common prefix
+ * \param [in] str - the object ID
+ * \return bool - \c false if \a str does not have the same prefix as \a this family
+ * (for internal usage)
+ */
+//================================================================================
+
+bool _pyStringFamily::Add( const char* str )
+{
+ if ( strncmp( str, _prefix.ToCString(), _prefix.Length() ) != 0 )
+ return false; // expected prefix is missing
+
+ str += _prefix.Length(); // skip _prefix
+
+ // try to add to some of child falimies
+ std::list< _pyStringFamily >::iterator itSub = _subFams.begin();
+ for ( ; itSub != _subFams.end(); ++itSub )
+ if ( itSub->Add( str ))
+ return true;
+
+ // no suitable family found - add str to _strings or create a new child family
+
+ // look for a proper place within sorted _strings
+ std::list< _AString >::iterator itStr = _strings.begin();
+ while ( itStr != _strings.end() && itStr->IsLess( str ))
+ ++itStr;
+ if ( itStr != _strings.end() && itStr->IsEqual( str ))
+ return true; // same ID already kept
+
+ const int minPrefixSize = 4;
+
+ // count "smaller" strings with the same prefix
+ std::list< _AString >::iterator itLess = itStr; --itLess;
+ int nbLess = 0;
+ for ( ; itLess != _strings.end(); --itLess )
+ if ( strncmp( str, itLess->ToCString(), minPrefixSize ) == 0 )
+ ++nbLess;
+ else
+ break;
+ ++itLess;
+ // count "greater" strings with the same prefix
+ std::list< _AString >::iterator itMore = itStr;
+ int nbMore = 0;
+ for ( ; itMore != _strings.end(); ++itMore )
+ if ( strncmp( str, itMore->ToCString(), minPrefixSize ) == 0 )
+ ++nbMore;
+ else
+ break;
+ --itMore;
+ if ( nbLess + nbMore > 1 ) // ------- ADD a NEW CHILD FAMILY -------------
+ {
+ // look for a maximal prefix length
+ // int lessPrefSize = 3, morePrefSize = 3;
+ // if ( nbLess > 0 )
+ // while( itLess->ToCString()[ lessPrefSize ] == str[ lessPrefSize ] )
+ // ++lessPrefSize;
+ // if ( nbMore > 0 )
+ // while ( itMore->ToCString()[ morePrefSize ] == str[ morePrefSize ] )
+ // ++morePrefSize;
+ // int prefixSize = 3;
+ // if ( nbLess == 0 )
+ // prefixSize = morePrefSize;
+ // else if ( nbMore == 0 )
+ // prefixSize = lessPrefSize;
+ // else
+ // prefixSize = Min( lessPrefSize, morePrefSize );
+ int prefixSize = minPrefixSize;
+ _AString newPrefix ( str, prefixSize );
+
+ // look for a proper place within _subFams sorted by _prefix
+ for ( itSub = _subFams.begin(); itSub != _subFams.end(); ++itSub )
+ if ( !itSub->_prefix.IsLess( newPrefix ))
+ break;
+
+ // add the new _pyStringFamily
+ itSub = _subFams.insert( itSub, _pyStringFamily());
+ _pyStringFamily& newSubFam = *itSub;
+ newSubFam._prefix = newPrefix;
+
+ // pass this->_strings to newSubFam._strings
+ for ( itStr = itLess; nbLess > 0; --nbLess, ++itStr )
+ newSubFam._strings.push_back( itStr->ToCString() + prefixSize );
+ newSubFam._strings.push_back( str + prefixSize );
+ for ( ; nbMore > 0; --nbMore, ++itStr )
+ newSubFam._strings.push_back( itStr->ToCString() + prefixSize );
+
+ _strings.erase( itLess, ++itMore );
+ }
+ else // too few string to make a family for them
+ {
+ _strings.insert( itStr, str );
+ }
+ return true;
+}
+
+//================================================================================
+/*!
+ * \brief Finds an object ID in the command
+ * \param [in] longStr - the command string
+ * \param [out] subStr - the found object ID
+ * \return bool - \c true if the object ID found
+ */
+//================================================================================
+
+bool _pyStringFamily::IsInArgs( Handle( _pyCommand)& cmd, std::list<_AString>& subStr )
+{
+ const _AString& longStr = cmd->GetString();
+ const char* s = longStr.ToCString();
+
+ // look in _subFams
+ std::list< _pyStringFamily >::iterator itSub = _subFams.begin();
+ int nbFound = 0, pos, len, from, argBeg = cmd->GetArgBeginning();
+ if ( argBeg < 4 || argBeg > longStr.Length() )
+ return false;
+ for ( ; itSub != _subFams.end(); ++itSub )
+ {
+ from = argBeg;
+ while (( pos = longStr.Location( itSub->_prefix, from, longStr.Length() )))
+ if (( len = itSub->isIn( s + pos-1 + itSub->_prefix.Length() )) >= 0 )
+ {
+ subStr.push_back( _AString( s + pos-1, len + itSub->_prefix.Length() ));
+ from = pos + len + itSub->_prefix.Length();
+ nbFound++;
+ }
+ else
+ {
+ from += itSub->_prefix.Length();
+ }
+ }
+ // look among _strings
+ std::list< _AString >::iterator itStr = _strings.begin();
+ for ( ; itStr != _strings.end(); ++itStr )
+ if (( pos = longStr.Location( *itStr, argBeg, longStr.Length() )))
+ // check that object ID does not continue after len
+ if ( !cmd->IsIDChar( s[ pos + itStr->Length() - 1 ] ))
+ {
+ subStr.push_back( *itStr );
+ nbFound++;
+ }
+ return nbFound;
+}
+
+//================================================================================
+/*!
+ * \brief Return remainder length of the object ID after my _prefix
+ * \param [in] str - remainder of the command after my _prefix
+ * \return int - length of the object ID or -1 if not found
+ */
+//================================================================================
+
+int _pyStringFamily::isIn( const char* str )
+{
+ std::list< _pyStringFamily >::iterator itSub = _subFams.begin();
+ int len = -1;
+ for ( ; itSub != _subFams.end(); ++itSub )
+ {
+ int cmp = strncmp( str, itSub->_prefix.ToCString(), itSub->_prefix.Length() );
+ if ( cmp == 0 )
+ {
+ if (( len = itSub->isIn( str + itSub->_prefix.Length() )) >= 0 )
+ return itSub->_prefix.Length() + len;
+ }
+ else if ( cmp < 0 )
+ break;
+ }
+ if ( !_strings.empty() )
+ {
+ std::list< _AString >::iterator itStr = _strings.begin();
+ bool firstEmpty = itStr->IsEmpty();
+ if ( firstEmpty )
+ ++itStr, len = 0;
+ for ( ; itStr != _strings.end(); ++itStr )
+ {
+ int cmp = strncmp( str, itStr->ToCString(), itStr->Length() );
+ if ( cmp == 0 )
+ {
+ len = itStr->Length();
+ break;
+ }
+ else if ( cmp < 0 )
+ {
+ break;
+ }
+ }
+
+ // check that object ID does not continue after len
+ if ( len >= 0 && _pyCommand::IsIDChar( str[len] ))
+ len = -1;
+ }
+
+ return len;
+}
+
+//================================================================================
+/*!
+ * \brief DEBUG
+ */
+//================================================================================
+
+void _pyStringFamily::Print( int level )
+{
+ cout << string( level, ' ' ) << "prefix = '" << _prefix << "' : ";
+ std::list< _AString >::iterator itStr = _strings.begin();
+ for ( ; itStr != _strings.end(); ++itStr )
+ cout << *itStr << " | ";
+ cout << endl;
+ std::list< _pyStringFamily >::iterator itSub = _subFams.begin();
+ for ( ; itSub != _subFams.end(); ++itSub )
+ itSub->Print( level + 1 );
+ if ( level == 0 )
+ cout << string( 70, '-' ) << endl;
+}
+
