IPAL54414: MED file info is not persistent

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index a235b9cc9dc8cac5118d807d583cb4f9e970029b..f8c8ba3d2a74824c27896d8baaf8eea76e46806e 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -11,6 +11,10 @@
         <source>MED_FILES_FILTER</source>
         <translation>MED files</translation>
     </message>
+    <message>
+        <source>SAUV_FILES_FILTER</source>
+        <translation>SAUV files</translation>
+    </message>
     <message>
         <source>IDEAS_FILES_FILTER</source>
         <translation>IDEAS files</translation>
@@ -23,10 +27,6 @@
         <source>TEXT_FILES_FILTER</source>
         <translation>TXT files</translation>
     </message>
-    <message>
-        <source>MED_VX_FILES_FILTER</source>
-        <translation>MED %1 files</translation>
-    </message>
     <message>
         <source>STL_FILES_FILTER</source>
         <translation>STL files</translation>
@@ -39,6 +39,10 @@
         <source>CGNS_FILES_FILTER</source>
         <translation>CGNS files</translation>
     </message>
+    <message>
+        <source>CGNS_EXPORT_ELEMS_BY_TYPE</source>
+        <translation>Group elements by type</translation>
+    </message>
     <message>
         <source>GMF_ASCII_FILES_FILTER</source>
         <translation>GMF ASCII files</translation>
@@ -63,10 +67,46 @@
         <source>AREA_ELEMENTS</source>
         <translation>Area</translation>
     </message>
+    <message>
+        <source>FREE_NODES</source>
+        <translation>Free nodes</translation>
+    </message>
+    <message>
+        <source>NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
+    <message>
+        <source>FREE_EDGES</source>
+        <translation>Free edges</translation>
+    </message>
+    <message>
+        <source>FREE_FACES</source>
+        <translation>Free faces</translation>
+    </message>
+    <message>
+        <source>BARE_BORDER_FACE</source>
+        <translation>Faces with bare border</translation>
+    </message>
+    <message>
+        <source>OVER_CONSTRAINED_FACE</source>
+        <translation>Over-constrained faces</translation>
+    </message>
+    <message>
+        <source>BARE_BORDER_VOLUME</source>
+        <translation>Volumes with bare border</translation>
+    </message>
+    <message>
+        <source>OVER_CONSTRAINED_VOLUME</source>
+        <translation>Over-constrained volumes</translation>
+    </message>
     <message>
         <source>MIN_DIAG_ELEMENTS</source>
         <translation>Minimum diagonal</translation>
     </message>
+    <message>
+        <source>MIN_ELEM_EDGE</source>
+        <translation>Minimum Edge Length</translation>
+    </message>
     <message>
         <source>ASPECTRATIO_3D_ELEMENTS</source>
         <translation>Aspect Ratio 3D</translation>
@@ -188,6 +228,10 @@
         <source>LENGTH2D_EDGES</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>DEFLECTION2D_FACES</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>LENGTH_EDGES</source>
         <translation>Length</translation>
@@ -204,6 +248,10 @@
         <source>MAX_ELEMENT_LENGTH_3D</source>
         <translation>Element Diameter 3D</translation>
     </message>
+    <message>
+        <source>DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>MEN_ADD</source>
         <translation>Add</translation>
@@ -256,6 +304,10 @@
         <source>MEN_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>MEN_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>MEN_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -348,6 +400,22 @@
         <source>MEN_DEL_GROUP</source>
         <translation>Delete Groups with Contents</translation>
     </message>
+    <message>
+        <source>MEN_ADD_TO_GROUP</source>
+        <translation>Add to Group</translation>
+    </message>
+    <message>
+        <source>MEN_REMOVE_FROM_GROUP</source>
+        <translation>Remove from Group</translation>
+    </message>
+    <message>
+        <source>STB_ADD_TO_GROUP</source>
+        <translation>Add selected elements to group</translation>
+    </message>
+    <message>
+        <source>STB_REMOVE_FROM_GROUP</source>
+        <translation>Remove selected elements from group</translation>
+    </message>
     <message>
         <source>MEN_FACE_ORIENTATION</source>
         <translation>Orientation of Faces</translation>
@@ -420,6 +488,14 @@
         <source>MEN_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>MEN_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>MEN_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>MEN_EXPORT</source>
         <translation>Export</translation>
@@ -584,6 +660,10 @@
         <source>MEN_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>MEN_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>MEN_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -624,6 +704,10 @@
         <source>MEN_LENGTH_2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>MEN_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>MEN_MAP</source>
         <translation>Pattern Mapping</translation>
@@ -824,6 +908,10 @@
         <source>MEN_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>MEN_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>MEN_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -1004,6 +1092,10 @@
         <source>MEN_SCALE</source>
         <translation>Scale Transform</translation>
     </message>
+    <message>
+        <source>MEN_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
     <message>
         <source>MEN_DUPLICATE_NODES</source>
         <translation>Duplicate Nodes or/and Elements</translation>
@@ -1084,6 +1176,10 @@
         <source>TOP_SPLIT_TO_TETRA</source>
         <translation>Split Volumes</translation>
     </message>
+    <message>
+        <source>STB_OVERALL_MESH_QUALITY</source>
+        <translation>Overall Mesh Quality</translation>
+    </message>
     <message>
         <source>STB_SPLIT_TO_TETRA</source>
         <translation>Split Volumes</translation>
@@ -1193,6 +1289,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_ELEM0D_TITLE</source>
         <translation>Add 0D Element</translation>
     </message>
+    <message>
+        <source>SMESH_DUPLICATE_0D</source>
+        <translation>Allow duplicate elements</translation>
+    </message>
     <message>
         <source>SMESH_ADD_BALL</source>
         <translation>Add Ball Element</translation>
@@ -1294,6 +1394,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_QUADRATIC_PENTAHEDRON_TITLE</source>
         <translation>Add Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_BIQUADRATIC_PENTAHEDRON_TITLE</source>
+        <translation>Add BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>SMESH_ADD_QUADRATIC_PYRAMID_TITLE</source>
         <translation>Add Quadratic Pyramid</translation>
@@ -1680,20 +1784,18 @@ Probably, there is not enough space on disk.</translation>
 You can cancel exporting and rename them,
 otherwise some group names in the resulting file
 will not match ones in the study.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_DUPLICATED_MESH_NAMES</source>
         <translation>There are some mesh objects with the same names in the selection.
 The result file may be incorrect.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
     </message>
     <message>
-        <source>SMESH_EXPORT_MED_V2_1</source>
-        <translation>During export mesh with name - &quot;%1&quot; to MED 2.1
-polygons and polyhedrons elements will be missed
-For correct export use MED 2.2
-Are you sure want to export to MED 2.1 ?</translation>
+        <source>SMESH_EXPORT_ONLY_GPOUP</source>
+        <translation>You are going to export the group without its mesh.
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_VERSION_COLLISION</source>
@@ -1712,7 +1814,7 @@ Overwrite the file?</translation>
         <source>EXPORT_NOT_SUPPORTED</source>
         <translation>During export mesh with name &quot;%1&quot; to %2
 %3 will be missed.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION</source>
@@ -1821,7 +1923,7 @@ add the exported data to its contents?</translation>
         <translation>Hexahedrons</translation>
     </message>
     <message>
-        <source>SMESH_HILIGHT_COLOR</source>
+        <source>SMESH_HIGHLIGHT_COLOR</source>
         <translation>Highlight Color</translation>
     </message>
     <message>
@@ -1883,7 +1985,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_HYP_9</source>
-        <translation>Such dimention hypothesis is already assigned to the shape</translation>
+        <translation>Such dimension hypothesis is already assigned to the shape</translation>
     </message>
     <message>
         <source>SMESH_ID_DIAGONAL</source>
@@ -2043,7 +2145,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_MESHINFO_ALL_TYPES</source>
-        <translation>Heterogenous</translation>
+        <translation>Heterogeneous</translation>
     </message>
     <message>
         <source>SMESH_MESHINFO_EDGES</source>
@@ -2449,10 +2551,18 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>SMESH_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>SMESH_QUADRATIC_PENTAHEDRONS</source>
         <translation>Quadratic Pentahedrons</translation>
     </message>
+    <message>
+        <source>SMESH_BIQUADRATIC_PENTAHEDRONS</source>
+        <translation>BiQuadratic Pentahedrons</translation>
+    </message>
     <message>
         <source>SMESH_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -2841,6 +2951,10 @@ Use Display Entity menu command to show them.
         <source>SMESH_WRN_WARNING</source>
         <translation>Warning</translation>
     </message>
+    <message>
+        <source>SMESH_WRN_SHOW_DLG_CHECKBOX</source>
+        <translation>Don't show this warning anymore.</translation>
+    </message>
     <message>
         <source>SMESH_X</source>
         <translation>X</translation>
@@ -2929,6 +3043,10 @@ Use Display Entity menu command to show them.
         <source>STB_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>STB_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>STB_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -3061,6 +3179,14 @@ Use Display Entity menu command to show them.
         <source>STB_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>STB_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>STB_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>STB_EXPORT_DAT</source>
         <translation>Export to DAT file</translation>
@@ -3129,6 +3255,10 @@ Use Display Entity menu command to show them.
         <source>STB_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>STB_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>STB_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -3161,6 +3291,10 @@ Use Display Entity menu command to show them.
         <source>STB_LENGTH_2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>STB_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>STB_MAP</source>
         <translation>Pattern mapping</translation>
@@ -3285,6 +3419,10 @@ Use Display Entity menu command to show them.
         <source>STB_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>STB_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>STB_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -3413,6 +3551,10 @@ Use Display Entity menu command to show them.
         <source>STB_SCALE</source>
         <translation>Scale Transform</translation>
     </message>
+    <message>
+        <source>STB_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
     <message>
         <source>STB_DUPLICATE_NODES</source>
         <translation>Duplicate Nodes or/and Elements</translation>
@@ -3597,6 +3739,10 @@ Use Display Entity menu command to show them.
         <source>TOP_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>TOP_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>TOP_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -3729,6 +3875,14 @@ Use Display Entity menu command to show them.
         <source>TOP_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>TOP_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>TOP_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>TOP_EXPORT_DAT</source>
         <translation>Export to DAT file</translation>
@@ -3789,6 +3943,10 @@ Use Display Entity menu command to show them.
         <source>TOP_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>TOP_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>TOP_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -3821,6 +3979,10 @@ Use Display Entity menu command to show them.
         <source>TOP_LENGTH_2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>TOP_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>TOP_MAP</source>
         <translation>Pattern mapping</translation>
@@ -3945,6 +4107,10 @@ Use Display Entity menu command to show them.
         <source>TOP_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>TOP_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>TOP_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -4069,6 +4235,10 @@ Use Display Entity menu command to show them.
         <source>TOP_SCALE</source>
         <translation>Scale Transform</translation>
     </message>
+    <message>
+        <source>TOP_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
     <message>
         <source>TOP_DUPLICATE_NODES</source>
         <translation>Duplicate Nodes or/and Elements</translation>
@@ -4151,7 +4321,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>MEN_FILE_INFO</source>
-        <translation>MED File Information</translation>
+        <translation>File Information</translation>
     </message>
     <message>
         <source>SMESH_WRN_NO_APPROPRIATE_SELECTION</source>
@@ -4288,6 +4458,54 @@ It can&apos;t be deleted </translation>
         <source>STB_SORT_CHILD_ITEMS</source>
         <translation>Sort child items</translation>
     </message>
+    <message>
+        <source>SMESH_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_ALGO_GROUP_BASIC</source>
+        <translation>Basic</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_BASIC</source>
+        <translation>Basic</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_PROGRESSION</source>
+        <translation>Progression</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_REGULAR</source>
+        <translation>Regular faces</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_FREE</source>
+        <translation>Free faces</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_REGULAR</source>
+        <translation>Regular volumes</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_FREE</source>
+        <translation>Free volumes</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FieldSelectorWdg</name>
@@ -4296,6 +4514,29 @@ It can&apos;t be deleted </translation>
         <translation>Export Fields</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_OffsetDlg</name>
+    <message>
+        <source>SMESH_OFFSET_TITLE</source>
+        <translation>Offset</translation>
+    </message>
+    <message>
+        <source>SMESH_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
+    <message>
+        <source>OFFSET_VALUE</source>
+        <translation>Offset Value</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_AddMeshElementDlg</name>
+    <message>
+        <source>NB_ADDED</source>
+        <translation>%1 elements have been added since 0D
+elements already present on the selected nodes.</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_Dialog</name>
     <message>
@@ -4326,6 +4567,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_AUTO_GROUPS</source>
         <translation>Automatically create groups for MED export</translation>
     </message>
+    <message>
+        <source>PREF_SHOW_WARN</source>
+        <translation>Show warning when exporting group</translation>
+    </message>
     <message>
         <source>PREF_GROUP_SEGMENT_LENGTH</source>
         <translation>Automatic parameters</translation>
@@ -4722,6 +4967,10 @@ Please, create VTK viewer and try again</translation>
         <source>SMESH_ADD_QUADRATIC_PENTAHEDRON</source>
         <translation>Add Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>Add BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>SMESH_ADD_QUADRATIC_PYRAMID</source>
         <translation>Add Quadratic Pyramid</translation>
@@ -5149,6 +5398,10 @@ Please select a group and try again</translation>
         <source>SEPARATE_CORNERS_AND_MEDIUM</source>
         <translation>No merge of corner and medium nodes of quadratic cells</translation>
     </message>
+    <message>
+        <source>AVOID_MAKING_HOLES</source>
+        <translation>Avoid making holes</translation>
+    </message>
     <message>
         <source>KEEP_NODES</source>
         <translation>Nodes to keep during the merge</translation>
@@ -5267,6 +5520,18 @@ Please select a group and try again</translation>
         <source>USE_INPUT_ELEMS_ONLY</source>
         <translation>Use only input elements</translation>
     </message>
+    <message>
+        <source>SMESH_SCALES</source>
+        <translation>Scale Factors</translation>
+    </message>
+    <message>
+        <source>LINEAR_SCALES</source>
+        <translation>Linear Variation of Scale Factors</translation>
+    </message>
+    <message>
+        <source>BASE_POINT</source>
+        <translation>Scaling Center</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FilterDlg</name>
@@ -5571,6 +5836,10 @@ Please check input data and try again</translation>
         <source>CONNECTED_ELEMS</source>
         <translation>Elements of a domain</translation>
     </message>
+    <message>
+        <source>NODE_CONN_NUMBER</source>
+        <translation>Connectivity number</translation>
+    </message>
     <message>
         <source>NUMBEROFNODESINELEMENT</source>
         <translation>Number Of Nodes In Element</translation>
@@ -5644,6 +5913,10 @@ Please enter correct value and try again</translation>
         <source>LENGTH2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>DEFLECTION2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>LESS_THAN</source>
         <translation>Less than</translation>
@@ -5832,18 +6105,22 @@ Please enter correct value and try again</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_21</source>
-        <translation>OCTA12</translation>
+        <translation>PENTA18</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_22</source>
-        <translation>POLYEDRE</translation>
+        <translation>OCTA12</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_23</source>
-        <translation>QPOLYEDRE</translation>
+        <translation>POLYEDRE</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_24</source>
+        <translation>QPOLYEDRE</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_25</source>
         <translation>BALL</translation>
     </message>
     <message>
@@ -6120,8 +6397,12 @@ Please specify them and try again</translation>
         <translation>3D</translation>
     </message>
     <message>
-        <source>EDIT_MESH_SUBMESH</source>
-        <translation>Edit mesh/sub-mesh</translation>
+        <source>EDIT_MESH</source>
+        <translation>Edit mesh</translation>
+    </message>
+    <message>
+        <source>EDIT_SUBMESH</source>
+        <translation>Edit sub-mesh</translation>
     </message>
     <message>
         <source>GEOMETRY</source>
@@ -6799,6 +7080,14 @@ It is impossible to read point coordinates from file</translation>
         <source>SMESH_CREATE_GROUP_FROM_GEOM</source>
         <translation>Create Groups from Geometry</translation>
     </message>
+    <message>
+        <source>ELEMENTS</source>
+        <translation>Elements</translation>
+    </message>
+    <message>
+        <source>ELEMENTS_TOOLTIP</source>
+        <translation>No 0D elements</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOrderDlg</name>
@@ -6811,7 +7100,7 @@ It is impossible to read point coordinates from file</translation>
     <name>SMESHGUI_MeshOrderOp</name>
     <message>
         <source>SMESH_NO_CONCURENT_MESH</source>
-        <translation>No concurent sub-meshes detected</translation>
+        <translation>No concurrent sub-meshes detected</translation>
     </message>
 </context>
 <context>
@@ -6971,6 +7260,10 @@ It is impossible to read point coordinates from file</translation>
         <source>ON_ALL_BOUNDARIES</source>
         <translation>On all boundaries</translation>
     </message>
+    <message>
+        <source>GENERATE_GROUPS</source>
+        <translation>Generate</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Make2DFrom3DDlg</name>
@@ -7229,6 +7522,10 @@ as they are of improper type:
         <source>ELEM_MODE</source>
         <translation>Element</translation>
     </message>
+    <message>
+        <source>SHOW_IDS</source>
+        <translation>Show IDs</translation>
+    </message>
     <message>
         <source>BUT_DUMP_MESH</source>
         <translation>&amp;Dump</translation>
@@ -7617,6 +7914,10 @@ as they are of improper type:
         <source>NUMBER_OF_THE_FREE_NODES</source>
         <translation>Number of the free nodes</translation>
     </message>
+    <message>
+        <source>MAX_NODE_CONNECTIVITY</source>
+        <translation>Max. number of connected elements</translation>
+    </message>
     <message>
         <source>DOUBLE_NODES_TOLERANCE</source>
         <translation>Double nodes tolerance</translation>
@@ -7994,4 +8295,23 @@ as they are of improper type:
         <translation>At least one entity type should be chosen!</translation>
     </message>
 </context>
+<context>
+    <name>SMESH_AdvOptionsWdg</name>
+    <message>
+        <source>ADD_OPTION_BTN</source>
+        <translation>Add option</translation>
+    </message>
+    <message>
+        <source>CHOICE</source>
+        <translation>Choice</translation>
+    </message>
+    <message>
+        <source>OPTION_NAME</source>
+        <translation>Option name</translation>
+    </message>
+    <message>
+        <source>OPTION_VALUE</source>
+        <translation>Option value</translation>
+    </message>
+</context>
 </TS>