23320: EDF13201 - Create group from geometry

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index ee06a2eb4eca63665aa1f50fb00953f6332acba0..a5e80c6594129f1b5e6b9f370e5f2a5c779e4f0f 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -63,6 +63,38 @@
         <source>AREA_ELEMENTS</source>
         <translation>Area</translation>
     </message>
+    <message>
+        <source>FREE_NODES</source>
+        <translation>Free nodes</translation>
+    </message>
+    <message>
+        <source>NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
+    <message>
+        <source>FREE_EDGES</source>
+        <translation>Free edges</translation>
+    </message>
+    <message>
+        <source>FREE_FACES</source>
+        <translation>Free faces</translation>
+    </message>
+    <message>
+        <source>BARE_BORDER_FACE</source>
+        <translation>Faces with bare border</translation>
+    </message>
+    <message>
+        <source>OVER_CONSTRAINED_FACE</source>
+        <translation>Over-constrained faces</translation>
+    </message>
+    <message>
+        <source>BARE_BORDER_VOLUME</source>
+        <translation>Volumes with bare border</translation>
+    </message>
+    <message>
+        <source>OVER_CONSTRAINED_VOLUME</source>
+        <translation>Over-constrained volumes</translation>
+    </message>
     <message>
         <source>MIN_DIAG_ELEMENTS</source>
         <translation>Minimum diagonal</translation>
@@ -256,6 +288,10 @@
         <source>MEN_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>MEN_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>MEN_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -348,6 +384,22 @@
         <source>MEN_DEL_GROUP</source>
         <translation>Delete Groups with Contents</translation>
     </message>
+    <message>
+        <source>MEN_ADD_TO_GROUP</source>
+        <translation>Add to Group</translation>
+    </message>
+    <message>
+        <source>MEN_REMOVE_FROM_GROUP</source>
+        <translation>Remove from Group</translation>
+    </message>
+    <message>
+        <source>STB_ADD_TO_GROUP</source>
+        <translation>Add selected elements to group</translation>
+    </message>
+    <message>
+        <source>STB_REMOVE_FROM_GROUP</source>
+        <translation>Remove selected elements from group</translation>
+    </message>
     <message>
         <source>MEN_FACE_ORIENTATION</source>
         <translation>Orientation of Faces</translation>
@@ -420,6 +472,14 @@
         <source>MEN_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>MEN_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>MEN_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>MEN_EXPORT</source>
         <translation>Export</translation>
@@ -584,6 +644,10 @@
         <source>MEN_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>MEN_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>MEN_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -792,6 +856,10 @@
         <source>MEN_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>MEN_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>MEN_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -932,6 +1000,10 @@
         <source>MEN_SHADE</source>
         <translation>Shading</translation>
     </message>
+    <message>
+        <source>MEN_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>MEN_QUADRATIC_REPRESENT</source>
         <translation>2D Quadratic</translation>
@@ -1076,10 +1148,26 @@
         <source>TOP_SPLIT_TO_TETRA</source>
         <translation>Split Volumes</translation>
     </message>
+    <message>
+        <source>STB_OVERALL_MESH_QUALITY</source>
+        <translation>Overall Mesh Quality</translation>
+    </message>
     <message>
         <source>STB_SPLIT_TO_TETRA</source>
         <translation>Split Volumes</translation>
     </message>
+    <message>
+        <source>MEN_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>TOP_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>STB_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
     <message>
         <source>MESHERS_FILE_CANT_OPEN</source>
         <translation>Can not open resource file</translation>
@@ -1123,8 +1211,13 @@ Please, select a mesh and try again</translation>
 Please enter a name of new group to be created or choose an existing one.</translation>
     </message>
     <message>
-        <source>MESH_STANDALONE_GRP_CHOSEN</source>
+        <source>MESH_GEOM_GRP_CHOSEN</source>
         <translation>Group on geometry is chosen: %1.
+Do you want to convert it to the standalone group?</translation>
+    </message>
+    <message>
+        <source>MESH_FILTER_GRP_CHOSEN</source>
+        <translation>Group on filter is chosen: %1.
 Do you want to convert it to the standalone group?</translation>
     </message>
     <message>
@@ -1168,6 +1261,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_ELEM0D_TITLE</source>
         <translation>Add 0D Element</translation>
     </message>
+    <message>
+        <source>SMESH_DUPLICATE_0D</source>
+        <translation>Allow duplicate elements</translation>
+    </message>
     <message>
         <source>SMESH_ADD_BALL</source>
         <translation>Add Ball Element</translation>
@@ -1221,6 +1318,14 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_POLYGON_TITLE</source>
         <translation>Add Polygon</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON</source>
+        <translation>Add Quadratic polygon</translation>
+    </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON_TITLE</source>
+        <translation>Add Quadratic Polygon</translation>
+    </message>
     <message>
         <source>SMESH_ADD_PENTA</source>
         <translation>Add pentahedron</translation>
@@ -1647,20 +1752,25 @@ Probably, there is not enough space on disk.</translation>
 You can cancel exporting and rename them,
 otherwise some group names in the resulting file
 will not match ones in the study.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_DUPLICATED_MESH_NAMES</source>
         <translation>There are some mesh objects with the same names in the selection.
 The result file may be incorrect.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
+    </message>
+    <message>
+        <source>SMESH_EXPORT_ONLY_GPOUP</source>
+        <translation>You are going to export the group without its mesh.
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_V2_1</source>
         <translation>During export mesh with name - &quot;%1&quot; to MED 2.1
 polygons and polyhedrons elements will be missed
 For correct export use MED 2.2
-Are you sure want to export to MED 2.1 ?</translation>
+Are you sure want to export to MED 2.1?</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_VERSION_COLLISION</source>
@@ -1679,7 +1789,7 @@ Overwrite the file?</translation>
         <source>EXPORT_NOT_SUPPORTED</source>
         <translation>During export mesh with name &quot;%1&quot; to %2
 %3 will be missed.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION</source>
@@ -1850,7 +1960,11 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_HYP_9</source>
-        <translation>Such dimention hypothesis is already assigned to the shape</translation>
+        <translation>Such dimension hypothesis is already assigned to the shape</translation>
+    </message>
+    <message>
+        <source>SMESH_ID_DIAGONAL</source>
+        <translation>Edges IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_EDGES</source>
@@ -2318,7 +2432,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>PREF_NUMBERING_ELEM</source>
-        <translation>Edges: Color</translation>
+        <translation>Elements: Color</translation>
     </message>
     <message>
         <source>PREF_NUMBERING_FONT</source>
@@ -2581,6 +2695,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_SEWING</source>
         <translation>Sewing</translation>
     </message>
+    <message>
+        <source>SMESH_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>SMESH_SMOOTHING</source>
         <translation>Smoothing</translation>
@@ -2800,6 +2918,10 @@ Use Display Entity menu command to show them.
         <source>SMESH_WRN_WARNING</source>
         <translation>Warning</translation>
     </message>
+    <message>
+        <source>SMESH_WRN_SHOW_DLG_CHECKBOX</source>
+        <translation>Don't show this warning anymore.</translation>
+    </message>
     <message>
         <source>SMESH_X</source>
         <translation>X</translation>
@@ -2888,6 +3010,10 @@ Use Display Entity menu command to show them.
         <source>STB_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>STB_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>STB_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -3020,6 +3146,14 @@ Use Display Entity menu command to show them.
         <source>STB_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>STB_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>STB_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>STB_EXPORT_DAT</source>
         <translation>Export to DAT file</translation>
@@ -3088,6 +3222,10 @@ Use Display Entity menu command to show them.
         <source>STB_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>STB_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>STB_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -3216,6 +3354,10 @@ Use Display Entity menu command to show them.
         <source>STB_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>STB_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>STB_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -3292,6 +3434,10 @@ Use Display Entity menu command to show them.
         <source>STB_SHOW_DISTRIBUTION</source>
         <translation>Show Distribution</translation>
     </message>
+    <message>
+        <source>STB_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar bar</translation>
+    </message>
     <message>
         <source>STB_REVOLUTION</source>
         <translation>Revolution</translation>
@@ -3548,6 +3694,10 @@ Use Display Entity menu command to show them.
         <source>TOP_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>TOP_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>TOP_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -3680,6 +3830,14 @@ Use Display Entity menu command to show them.
         <source>TOP_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>TOP_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>TOP_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>TOP_EXPORT_DAT</source>
         <translation>Export to DAT file</translation>
@@ -3740,6 +3898,10 @@ Use Display Entity menu command to show them.
         <source>TOP_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>TOP_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>TOP_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -3868,6 +4030,10 @@ Use Display Entity menu command to show them.
         <source>TOP_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>TOP_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>TOP_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -4235,6 +4401,54 @@ It can&apos;t be deleted </translation>
         <source>STB_SORT_CHILD_ITEMS</source>
         <translation>Sort child items</translation>
     </message>
+    <message>
+        <source>SMESH_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_ALGO_GROUP_BASIC</source>
+        <translation>Basic</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_BASIC</source>
+        <translation>Basic</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_PROGRESSION</source>
+        <translation>Progression</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_REGULAR</source>
+        <translation>Regular faces</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_FREE</source>
+        <translation>Free faces</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_REGULAR</source>
+        <translation>Regular volumes</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_FREE</source>
+        <translation>Free volumes</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FieldSelectorWdg</name>
@@ -4243,6 +4457,14 @@ It can&apos;t be deleted </translation>
         <translation>Export Fields</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_AddMeshElementDlg</name>
+    <message>
+        <source>NB_ADDED</source>
+        <translation>%1 elements have been added since 0D
+elements already present on the selected nodes.</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_Dialog</name>
     <message>
@@ -4273,6 +4495,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_AUTO_GROUPS</source>
         <translation>Automatically create groups for MED export</translation>
     </message>
+    <message>
+        <source>PREF_SHOW_WARN</source>
+        <translation>Show warning when exporting group</translation>
+    </message>
     <message>
         <source>PREF_GROUP_SEGMENT_LENGTH</source>
         <translation>Automatic parameters</translation>
@@ -4354,17 +4580,25 @@ Please, create VTK viewer and try again</translation>
         <translation>Display entity</translation>
     </message>
     <message>
-        <source>QUADRATIC_REPRESENT_MODE</source>
+        <source>QUADRATIC_REPRESENT_MODE_GROUP</source>
         <translation>Representation of the 2D quadratic elements</translation>
     </message>
+    <message>
+        <source>QUADRATIC_REPRESENT_MODE</source>
+        <translation>Default mode of the 2D quadratic elements</translation>
+    </message>
     <message>
         <source>MAX_ARC_ANGLE</source>
         <translation>Maximum angle</translation>
     </message>
     <message>
-        <source>PREF_DISPLAY_MODE</source>
+        <source>PREF_DISPLAY_MODE_GROUP</source>
         <translation>Display mode</translation>
     </message>
+    <message>
+        <source>PREF_DISPLAY_MODE</source>
+        <translation>Default display mode</translation>
+    </message>
     <message>
         <source>PREF_ELEMENTS</source>
         <translation>Elements</translation>
@@ -4575,7 +4809,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_COLOR_0D</source>
-        <translation>0D elements</translation>
+        <translation>0D element color</translation>
     </message>
     <message>
         <source>PREF_SIZE_0D</source>
@@ -4583,7 +4817,11 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_BALL_COLOR</source>
-        <translation>Balls</translation>
+        <translation>Ball color</translation>
+    </message>
+    <message>
+        <source>PREF_BALL_DIAMETER</source>
+        <translation>Default diameter of ball elements</translation>
     </message>
     <message>
         <source>PREF_BALL_SIZE</source>
@@ -4837,9 +5075,7 @@ Please, create VTK viewer and try again</translation>
     <name>SMESHGUI_PrecomputeOp</name>
     <message>
         <source>CLEAR_SUBMESH_QUESTION</source>
-        <translation>Temporary sub-meshes on the selected geometry
-were created during preview operation.
-Do you want to remove all these sub-meshes?</translation>
+        <translation>Do you want to remove mesh entities generated during preview operation?</translation>
     </message>
     <message>
         <source>SMESH_WRN_NOTHING_PREVIEW</source>
@@ -4851,6 +5087,33 @@ Do you want to remove all these sub-meshes?</translation>
 Do you want to restore original sub-mesh priority?</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_SplitBiQuadDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>MESH</source>
+        <translation>Mesh, Group or Sub-mesh</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_SplitBiQuadOp</name>
+    <message>
+        <source>MESH_IS_NOT_SELECTED</source>
+        <translation>No object to split is selected.
+Please specify it and try again</translation>
+    </message>
+    <message>
+        <source>REF_IS_NULL</source>
+        <translation>No valid mesh object selected</translation>
+    </message>
+    <message>
+        <source>DIFFERENT_MESHES</source>
+        <translation>Selected objects belong to different meshes</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_ConvToQuadDlg</name>
     <message>
@@ -5032,8 +5295,12 @@ Please select a group and try again</translation>
         <translation>Detect</translation>
     </message>
     <message>
-        <source>EDIT_SELECTED_GROUP</source>
-        <translation>Edit selected group</translation>
+        <source>EDIT_SELECTED_NODE_GROUP</source>
+        <translation>Edit selected group of coincident nodes</translation>
+    </message>
+    <message>
+        <source>EDIT_SELECTED_ELEM_GROUP</source>
+        <translation>Edit selected group of coincident elements</translation>
     </message>
     <message>
         <source>SELECT_ALL</source>
@@ -5049,7 +5316,27 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>EXCLUDE_GROUPS</source>
-        <translation>Exclude Groups</translation>
+        <translation>Exclude groups from detection</translation>
+    </message>
+    <message>
+        <source>SEPARATE_CORNERS_AND_MEDIUM</source>
+        <translation>No merge of corner and medium nodes of quadratic cells</translation>
+    </message>
+    <message>
+        <source>AVOID_MAKING_HOLES</source>
+        <translation>Avoid making holes</translation>
+    </message>
+    <message>
+        <source>KEEP_NODES</source>
+        <translation>Nodes to keep during the merge</translation>
+    </message>
+    <message>
+        <source>GROUP_SUBMESH</source>
+        <translation>Groups and sub-meshes</translation>
+    </message>
+    <message>
+        <source>SELECT</source>
+        <translation>Select: </translation>
     </message>
 </context>
 <context>
@@ -5157,6 +5444,18 @@ Please select a group and try again</translation>
         <source>USE_INPUT_ELEMS_ONLY</source>
         <translation>Use only input elements</translation>
     </message>
+    <message>
+        <source>SMESH_SCALES</source>
+        <translation>Scale Factors</translation>
+    </message>
+    <message>
+        <source>LINEAR_SCALES</source>
+        <translation>Linear Variation of Scale Factors</translation>
+    </message>
+    <message>
+        <source>BASE_POINT</source>
+        <translation>Scaling Center</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FilterDlg</name>
@@ -5203,7 +5502,7 @@ Please select valid object and try again</translation>
     </message>
     <message>
         <source>SHAPE_IS_NOT_A_CYLINDER</source>
-        <translation>&quot;%1&quot; is not a cylinderical face
+        <translation>&quot;%1&quot; is not a cylindrical face
 Please select a cylindrical face and try again</translation>
     </message>
     <message>
@@ -5421,6 +5720,10 @@ Please check input data and try again</translation>
         <source>OVER_CONSTRAINED_FACE</source>
         <translation>Over-constrained faces</translation>
     </message>
+    <message>
+        <source>BELONG_TO_MESH_GROUP</source>
+        <translation>Belong to Mesh Group</translation>
+    </message>
     <message>
         <source>BELONG_TO_CYLINDER</source>
         <translation>Belong to Cylinder</translation>
@@ -5457,6 +5760,10 @@ Please check input data and try again</translation>
         <source>CONNECTED_ELEMS</source>
         <translation>Elements of a domain</translation>
     </message>
+    <message>
+        <source>NODE_CONN_NUMBER</source>
+        <translation>Connectivity number</translation>
+    </message>
     <message>
         <source>NUMBEROFNODESINELEMENT</source>
         <translation>Number Of Nodes In Element</translation>
@@ -5626,7 +5933,7 @@ Please enter correct value and try again</translation>
     </message>
     <message>
         <source>ELEMENTS</source>
-        <translation>Elements</translation>
+        <translation>All</translation>
     </message>
     <message>
         <source>ENTITY_TYPE</source>
@@ -6006,8 +6313,12 @@ Please specify them and try again</translation>
         <translation>3D</translation>
     </message>
     <message>
-        <source>EDIT_MESH_SUBMESH</source>
-        <translation>Edit mesh/sub-mesh</translation>
+        <source>EDIT_MESH</source>
+        <translation>Edit mesh</translation>
+    </message>
+    <message>
+        <source>EDIT_SUBMESH</source>
+        <translation>Edit sub-mesh</translation>
     </message>
     <message>
         <source>GEOMETRY</source>
@@ -6553,6 +6864,42 @@ It is impossible to read point coordinates from file</translation>
         <source>SIDE_2</source>
         <translation>Side 2</translation>
     </message>
+    <message>
+        <source>AUTO_SEWING</source>
+        <translation>Auto Sewing</translation>
+    </message>
+    <message>
+        <source>COINCIDENT_FREE_BORDERS</source>
+        <translation>Coincident Free Borders</translation>
+    </message>
+    <message>
+        <source>DETECT</source>
+        <translation>Detect</translation>
+    </message>
+    <message>
+        <source>SELECT_ALL</source>
+        <translation>Select all</translation>
+    </message>
+    <message>
+        <source>EDIT_SELECTED_GROUP</source>
+        <translation>Edit Selected Group</translation>
+    </message>
+    <message>
+        <source>STEP</source>
+        <translation>Step</translation>
+    </message>
+    <message>
+        <source>NO_BORDERS_TO_SEW</source>
+        <translation>No free borders to sew found</translation>
+    </message>
+    <message>
+        <source>NOT_ALL_BORDERS_SEWED</source>
+        <translation>%1 of %2 groups of borders sewed</translation>
+    </message>
+    <message>
+        <source>ALL_BORDERS_SEWED</source>
+        <translation>%1 group(s) of borders sewed</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_ShapeByMeshDlg</name>
@@ -6649,6 +6996,14 @@ It is impossible to read point coordinates from file</translation>
         <source>SMESH_CREATE_GROUP_FROM_GEOM</source>
         <translation>Create Groups from Geometry</translation>
     </message>
+    <message>
+        <source>ELEMENTS</source>
+        <translation>Elements</translation>
+    </message>
+    <message>
+        <source>ELEMENTS_TOOLTIP</source>
+        <translation>No 0D elements</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOrderDlg</name>
@@ -7079,6 +7434,10 @@ as they are of improper type:
         <source>ELEM_MODE</source>
         <translation>Element</translation>
     </message>
+    <message>
+        <source>SHOW_IDS</source>
+        <translation>Show IDs</translation>
+    </message>
     <message>
         <source>BUT_DUMP_MESH</source>
         <translation>&amp;Dump</translation>
@@ -7467,6 +7826,10 @@ as they are of improper type:
         <source>NUMBER_OF_THE_FREE_NODES</source>
         <translation>Number of the free nodes</translation>
     </message>
+    <message>
+        <source>MAX_NODE_CONNECTIVITY</source>
+        <translation>Max. number of connected elements</translation>
+    </message>
     <message>
         <source>DOUBLE_NODES_TOLERANCE</source>
         <translation>Double nodes tolerance</translation>
@@ -7844,4 +8207,23 @@ as they are of improper type:
         <translation>At least one entity type should be chosen!</translation>
     </message>
 </context>
+<context>
+    <name>SMESH_AdvOptionsWdg</name>
+    <message>
+        <source>ADD_OPTION_BTN</source>
+        <translation>Add option</translation>
+    </message>
+    <message>
+        <source>CHOICE</source>
+        <translation>Choice</translation>
+    </message>
+    <message>
+        <source>OPTION_NAME</source>
+        <translation>Option name</translation>
+    </message>
+    <message>
+        <source>OPTION_VALUE</source>
+        <translation>Option value</translation>
+    </message>
+</context>
 </TS>