23320: EDF13201 - Create group from geometry

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index 7fe4e8f7c0cda1356c77c709e427275917b43a76..a5e80c6594129f1b5e6b9f370e5f2a5c779e4f0f 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -63,6 +63,38 @@
         <source>AREA_ELEMENTS</source>
         <translation>Area</translation>
     </message>
+    <message>
+        <source>FREE_NODES</source>
+        <translation>Free nodes</translation>
+    </message>
+    <message>
+        <source>NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
+    <message>
+        <source>FREE_EDGES</source>
+        <translation>Free edges</translation>
+    </message>
+    <message>
+        <source>FREE_FACES</source>
+        <translation>Free faces</translation>
+    </message>
+    <message>
+        <source>BARE_BORDER_FACE</source>
+        <translation>Faces with bare border</translation>
+    </message>
+    <message>
+        <source>OVER_CONSTRAINED_FACE</source>
+        <translation>Over-constrained faces</translation>
+    </message>
+    <message>
+        <source>BARE_BORDER_VOLUME</source>
+        <translation>Volumes with bare border</translation>
+    </message>
+    <message>
+        <source>OVER_CONSTRAINED_VOLUME</source>
+        <translation>Over-constrained volumes</translation>
+    </message>
     <message>
         <source>MIN_DIAG_ELEMENTS</source>
         <translation>Minimum diagonal</translation>
@@ -123,6 +155,10 @@
         <source>COMPERR_STD_EXCEPTION</source>
         <translation>std::exception</translation>
     </message>
+    <message>
+        <source>COMPERR_WARNING</source>
+        <translation>Warning</translation>
+    </message>
     <message>
         <source>COMPERR_UNKNOWN</source>
         <translation>Unknown error</translation>
@@ -135,6 +171,10 @@
         <source>COMPERR_NO_MESH_ON_SHAPE</source>
         <translation>No mesh elements assigned to a Sub-shape</translation>
     </message>
+    <message>
+        <source>COMPERR_BAD_PARMETERS</source>
+        <translation>Invalid input parameters</translation>
+    </message>
     <message>
         <source>EDITERR_NO_MEDIUM_ON_GEOM</source>
         <translation>Some medium nodes not placed on geometry to avoid
@@ -248,6 +288,10 @@
         <source>MEN_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>MEN_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>MEN_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -278,7 +322,7 @@
     </message>
     <message>
         <source>MEN_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>MEN_CREATE_GROUP</source>
@@ -340,6 +384,22 @@
         <source>MEN_DEL_GROUP</source>
         <translation>Delete Groups with Contents</translation>
     </message>
+    <message>
+        <source>MEN_ADD_TO_GROUP</source>
+        <translation>Add to Group</translation>
+    </message>
+    <message>
+        <source>MEN_REMOVE_FROM_GROUP</source>
+        <translation>Remove from Group</translation>
+    </message>
+    <message>
+        <source>STB_ADD_TO_GROUP</source>
+        <translation>Add selected elements to group</translation>
+    </message>
+    <message>
+        <source>STB_REMOVE_FROM_GROUP</source>
+        <translation>Remove selected elements from group</translation>
+    </message>
     <message>
         <source>MEN_FACE_ORIENTATION</source>
         <translation>Orientation of Faces</translation>
@@ -388,6 +448,10 @@
         <source>MEN_EDGES</source>
         <translation>Edges</translation>
     </message>
+    <message>
+        <source>MEN_CHOOSE</source>
+        <translation>Choose...</translation>
+    </message>
     <message>
         <source>MEN_EDIT</source>
         <translation>Edit</translation>
@@ -408,6 +472,14 @@
         <source>MEN_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>MEN_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>MEN_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>MEN_EXPORT</source>
         <translation>Export</translation>
@@ -462,15 +534,15 @@
     </message>
     <message>
         <source>TOP_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>MEN_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>STB_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>TOP_FIND_ELEM</source>
@@ -572,6 +644,10 @@
         <source>MEN_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>MEN_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>MEN_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -708,6 +784,46 @@
         <source>TOP_MEASURE_BND_BOX</source>
         <translation>Bounding box</translation>
     </message>
+    <message>
+        <source>MEN_BASIC_PROPERTIES</source>
+        <translation>Basic Properties</translation>
+    </message>
+    <message>
+        <source>MEN_MEASURE_LENGTH</source>
+        <translation>Length</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_LENGTH</source>
+        <translation>Calculate sum of length of all 1D elements of the selected object(s)</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_LENGTH</source>
+        <translation>Length</translation>
+    </message>
+    <message>
+        <source>MEN_MEASURE_AREA</source>
+        <translation>Area</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_AREA</source>
+        <translation>Calculate sum of area of all 2D elements of the selected object(s)</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_AREA</source>
+        <translation>Area</translation>
+    </message>
+    <message>
+        <source>MEN_MEASURE_VOLUME</source>
+        <translation>Volume</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_VOLUME</source>
+        <translation>Calculate sum of volume of all 3D elements of the selected object(s)</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_VOLUME</source>
+        <translation>Volume</translation>
+    </message>
     <message>
         <source>MEN_MOVE</source>
         <translation>Move Node</translation>
@@ -740,6 +856,10 @@
         <source>MEN_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>MEN_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>MEN_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -824,6 +944,10 @@
         <source>MEN_RESET</source>
         <translation>Reset</translation>
     </message>
+    <message>
+        <source>MEN_OVERALL_MESH_QUALITY</source>
+        <translation>Overall Mesh Quality</translation>
+    </message>
     <message>
         <source>MEN_DISTRIBUTION_CTRL</source>
         <translation>Distribution</translation>
@@ -876,6 +1000,10 @@
         <source>MEN_SHADE</source>
         <translation>Shading</translation>
     </message>
+    <message>
+        <source>MEN_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>MEN_QUADRATIC_REPRESENT</source>
         <translation>2D Quadratic</translation>
@@ -942,7 +1070,7 @@
     </message>
     <message>
         <source>MEN_DUPLICATE_NODES</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes or/and Elements</translation>
     </message>
     <message>
         <source>MEN_TRANSF</source>
@@ -982,7 +1110,7 @@
     </message>
     <message>
         <source>MEN_UNDERLYING_ELEMS</source>
-        <translation>Group of underlying entities</translation>
+        <translation>Group based on nodes of other groups</translation>
     </message>
     <message>
         <source>MEN_UPDATE</source>
@@ -1014,15 +1142,31 @@
     </message>
     <message>
         <source>MEN_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>TOP_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
+    </message>
+    <message>
+        <source>STB_OVERALL_MESH_QUALITY</source>
+        <translation>Overall Mesh Quality</translation>
     </message>
     <message>
         <source>STB_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
+    </message>
+    <message>
+        <source>MEN_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>TOP_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>STB_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
     </message>
     <message>
         <source>MESHERS_FILE_CANT_OPEN</source>
@@ -1067,8 +1211,13 @@ Please, select a mesh and try again</translation>
 Please enter a name of new group to be created or choose an existing one.</translation>
     </message>
     <message>
-        <source>MESH_STANDALONE_GRP_CHOSEN</source>
+        <source>MESH_GEOM_GRP_CHOSEN</source>
         <translation>Group on geometry is chosen: %1.
+Do you want to convert it to the standalone group?</translation>
+    </message>
+    <message>
+        <source>MESH_FILTER_GRP_CHOSEN</source>
+        <translation>Group on filter is chosen: %1.
 Do you want to convert it to the standalone group?</translation>
     </message>
     <message>
@@ -1112,6 +1261,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_ELEM0D_TITLE</source>
         <translation>Add 0D Element</translation>
     </message>
+    <message>
+        <source>SMESH_DUPLICATE_0D</source>
+        <translation>Allow duplicate elements</translation>
+    </message>
     <message>
         <source>SMESH_ADD_BALL</source>
         <translation>Add Ball Element</translation>
@@ -1165,6 +1318,14 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_POLYGON_TITLE</source>
         <translation>Add Polygon</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON</source>
+        <translation>Add Quadratic polygon</translation>
+    </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON_TITLE</source>
+        <translation>Add Quadratic Polygon</translation>
+    </message>
     <message>
         <source>SMESH_ADD_PENTA</source>
         <translation>Add pentahedron</translation>
@@ -1231,7 +1392,7 @@ Please enter correct values and try again</translation>
     </message>
     <message>
         <source>SMESH_ADD_SUBMESH</source>
-        <translation>SubMesh Construction</translation>
+        <translation>Sub-mesh Construction</translation>
     </message>
     <message>
         <source>SMESH_ADD_TETRAS</source>
@@ -1265,6 +1426,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_AUTO_GROUPS</source>
         <translation>Automatically create groups</translation>
     </message>
+    <message>
+        <source>SMESH_AUTO_DIM</source>
+        <translation>Automatically define space dimension</translation>
+    </message>
     <message>
         <source>SMESH_REQUIRED_GROUPS</source>
         <translation>Create groups of required entities</translation>
@@ -1587,20 +1752,25 @@ Probably, there is not enough space on disk.</translation>
 You can cancel exporting and rename them,
 otherwise some group names in the resulting file
 will not match ones in the study.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_DUPLICATED_MESH_NAMES</source>
         <translation>There are some mesh objects with the same names in the selection.
 The result file may be incorrect.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
+    </message>
+    <message>
+        <source>SMESH_EXPORT_ONLY_GPOUP</source>
+        <translation>You are going to export the group without its mesh.
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_V2_1</source>
         <translation>During export mesh with name - &quot;%1&quot; to MED 2.1
 polygons and polyhedrons elements will be missed
 For correct export use MED 2.2
-Are you sure want to export to MED 2.1 ?</translation>
+Are you sure want to export to MED 2.1?</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_VERSION_COLLISION</source>
@@ -1619,7 +1789,7 @@ Overwrite the file?</translation>
         <source>EXPORT_NOT_SUPPORTED</source>
         <translation>During export mesh with name &quot;%1&quot; to %2
 %3 will be missed.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION</source>
@@ -1633,10 +1803,18 @@ Do you want to continue ?</translation>
         <source>SMESH_EXTRUSION_ALONG_VECTOR</source>
         <translation>Extrusion Along Vector</translation>
     </message>
+    <message>
+        <source>SMESH_EXTRUSION_BY_NORMAL</source>
+        <translation>Extrusion By Normal</translation>
+    </message>
     <message>
         <source>SMESH_FACE</source>
         <translation>Face</translation>
     </message>
+    <message>
+        <source>SMESH_FACES</source>
+        <translation>Faces</translation>
+    </message>
     <message>
         <source>SMESH_FEATUREANGLE</source>
         <translation>Feature Angle</translation>
@@ -1737,7 +1915,7 @@ add the exported data to its contents?</translation>
     </message>
     <message>
         <source>SMESH_HYP_10</source>
-        <translation>Hypothesis and submesh dimensions mismatch</translation>
+        <translation>Hypothesis and sub-mesh dimensions mismatch</translation>
     </message>
     <message>
         <source>SMESH_HYP_11</source>
@@ -1762,7 +1940,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_HYP_4</source>
-        <translation>Submesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
+        <translation>Sub-mesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
     </message>
     <message>
         <source>SMESH_HYP_5</source>
@@ -1782,23 +1960,27 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_HYP_9</source>
-        <translation>Such dimention hypothesis is already assigned to the shape</translation>
+        <translation>Such dimension hypothesis is already assigned to the shape</translation>
     </message>
     <message>
         <source>SMESH_ID_DIAGONAL</source>
-        <translation>Id Edges</translation>
+        <translation>Edges IDs</translation>
+    </message>
+    <message>
+        <source>SMESH_ID_EDGES</source>
+        <translation>Edge IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_ELEMENTS</source>
-        <translation>Id Elements</translation>
+        <translation>Element IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_FACES</source>
-        <translation>Id Faces</translation>
+        <translation>Face IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_NODES</source>
-        <translation>Id Nodes</translation>
+        <translation>Node IDs</translation>
     </message>
     <message>
         <source>SMESH_INCORRECT_INPUT</source>
@@ -1870,23 +2052,23 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnCompound</source>
-        <translation>SubMeshes On Compound</translation>
+        <translation>Sub-meshes On Compound</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnEdge</source>
-        <translation>SubMeshes On Edge</translation>
+        <translation>Sub-meshes On Edge</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnFace</source>
-        <translation>SubMeshes On Face</translation>
+        <translation>Sub-meshes On Face</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnSolid</source>
-        <translation>SubMeshes On Solid</translation>
+        <translation>Sub-meshes On Solid</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnVertex</source>
-        <translation>SubMeshes On Vertex</translation>
+        <translation>Sub-meshes On Vertex</translation>
     </message>
     <message>
         <source>SMESH_AUTOMATIC</source>
@@ -1980,6 +2162,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_MESHINFO_ORDER2</source>
         <translation>Quadratic</translation>
     </message>
+    <message>
+        <source>SMESH_MESHINFO_ORDER3</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
     <message>
         <source>SMESH_MESHINFO_HEXAPRISM</source>
         <translation>Hexagonal prisms</translation>
@@ -2096,9 +2282,13 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_OBJECT_MESH</source>
         <translation>Mesh</translation>
     </message>
+    <message>
+        <source>SMESH_OBJECTS</source>
+        <translation>Objects</translation>
+    </message>
     <message>
         <source>SMESH_OBJECT_MESHorSUBMESH</source>
-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_OPERATION_FAILED</source>
@@ -2240,9 +2430,9 @@ Check algorithm documentation for supported geometry</translation>
         <source>PREF_NUMBERING_NODE</source>
         <translation>Nodes: Color</translation>
     </message>
-     <message>
+    <message>
         <source>PREF_NUMBERING_ELEM</source>
-        <translation>Edges: Color</translation>
+        <translation>Elements: Color</translation>
     </message>
     <message>
         <source>PREF_NUMBERING_FONT</source>
@@ -2505,6 +2695,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_SEWING</source>
         <translation>Sewing</translation>
     </message>
+    <message>
+        <source>SMESH_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>SMESH_SMOOTHING</source>
         <translation>Smoothing</translation>
@@ -2515,11 +2709,11 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_SUBMESH</source>
-        <translation>SubMesh</translation>
+        <translation>Sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_SUBMESH_SELECTED</source>
-        <translation>%1 SubMeshes</translation>
+        <translation>%1 Sub-meshes</translation>
     </message>
     <message>
         <source>SMESH_SYMMETRY</source>
@@ -2551,7 +2745,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_DUPLICATE_TITLE</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes and/or Elements</translation>
     </message>
     <message>
         <source>SMESH_SCALE</source>
@@ -2643,6 +2837,10 @@ Consider saving your work before application crash</translation>
         <source>SMESH_VOLUME</source>
         <translation>Volume</translation>
     </message>
+    <message>
+        <source>SMESH_VOLUMES</source>
+        <translation>Volumes</translation>
+    </message>
     <message>
         <source>SMESH_WARNING</source>
         <translation>Warning</translation>
@@ -2705,14 +2903,25 @@ Consider saving your work before application crash</translation>
     </message>
     <message>
         <source>SMESH_WRN_SIZE_LIMIT_EXCEEDED</source>
-        <translation>No automatic update of the presentation has been done: new mesh size (%1 elements) exceeds current size limit (%2 elements).
-Please check preferences of Mesh module.
+        <translation>No automatic update of the presentation has been done:
+New mesh size (%1 elements) exceeds current size limit of automatic update (%2 elements).
+</translation>
+    </message>
+    <message>
+        <source>SMESH_WRN_SIZE_INC_LIMIT_EXCEEDED</source>
+        <translation>New mesh size (%1 elements) exceeds current size limit of automatic update (%2 elements).
+The following elements are not shown: %3.
+Use Display Entity menu command to show them.
 </translation>
     </message>
     <message>
         <source>SMESH_WRN_WARNING</source>
         <translation>Warning</translation>
     </message>
+    <message>
+        <source>SMESH_WRN_SHOW_DLG_CHECKBOX</source>
+        <translation>Don't show this warning anymore.</translation>
+    </message>
     <message>
         <source>SMESH_X</source>
         <translation>X</translation>
@@ -2801,6 +3010,10 @@ Please check preferences of Mesh module.
         <source>STB_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>STB_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>STB_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -2831,7 +3044,7 @@ Please check preferences of Mesh module.
     </message>
     <message>
         <source>STB_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>STB_CREATE_GROUP</source>
@@ -2933,6 +3146,14 @@ Please check preferences of Mesh module.
         <source>STB_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>STB_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>STB_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>STB_EXPORT_DAT</source>
         <translation>Export to DAT file</translation>
@@ -3001,6 +3222,10 @@ Please check preferences of Mesh module.
         <source>STB_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>STB_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>STB_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -3129,6 +3354,10 @@ Please check preferences of Mesh module.
         <source>STB_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>STB_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>STB_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -3205,6 +3434,10 @@ Please check preferences of Mesh module.
         <source>STB_SHOW_DISTRIBUTION</source>
         <translation>Show Distribution</translation>
     </message>
+    <message>
+        <source>STB_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar bar</translation>
+    </message>
     <message>
         <source>STB_REVOLUTION</source>
         <translation>Revolution</translation>
@@ -3279,7 +3512,7 @@ Please check preferences of Mesh module.
     </message>
     <message>
         <source>STB_DUPLICATE_NODES</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes or/and Elements</translation>
     </message>
     <message>
         <source>STB_TRANSP</source>
@@ -3315,7 +3548,7 @@ Please check preferences of Mesh module.
     </message>
     <message>
         <source>STB_UNDERLYING_ELEMS</source>
-        <translation>Create groups of entities from existing groups of superior dimensions</translation>
+        <translation>Create groups of entities basing on nodes of other groups</translation>
     </message>
     <message>
         <source>STB_UPDATE</source>
@@ -3346,12 +3579,44 @@ Please check preferences of Mesh module.
         <translation>Taper</translation>
     </message>
     <message>
-        <source>TB_ADD_REMOVE</source>
-        <translation>Add/Remove Toolbar</translation>
+        <source>TB_ADD</source>
+        <translation>Add Element Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_ADDNON</source>
+        <translation>Add Non Linear Element Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_REM</source>
+        <translation>Remove Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_RENUMBER</source>
+        <translation>Renumbering Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_TRANSFORM</source>
+        <translation>Transformation Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL0D</source>
+        <translation>Node Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL1D</source>
+        <translation>Edge Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL2D</source>
+        <translation>Face Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL3D</source>
+        <translation>Volume Controls Toolbar</translation>
     </message>
     <message>
-        <source>TB_CTRL</source>
-        <translation>Controls Toolbar</translation>
+        <source>TB_MEASUREM</source>
+        <translation>Measurements Toolbar</translation>
     </message>
     <message>
         <source>TB_DISP_MODE</source>
@@ -3365,6 +3630,18 @@ Please check preferences of Mesh module.
         <source>TB_MESH</source>
         <translation>Mesh Toolbar</translation>
     </message>
+    <message>
+        <source>TB_GROUP</source>
+        <translation>Group Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_INFO</source>
+        <translation>Information Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_ADD1D</source>
+        <translation>Mesh Toolbar</translation>
+    </message>
     <message>
         <source>TB_MODIFY</source>
         <translation>Modification Toolbar</translation>
@@ -3417,6 +3694,10 @@ Please check preferences of Mesh module.
         <source>TOP_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>TOP_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>TOP_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -3447,7 +3728,7 @@ Please check preferences of Mesh module.
     </message>
     <message>
         <source>TOP_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>TOP_CREATE_GROUP</source>
@@ -3549,6 +3830,14 @@ Please check preferences of Mesh module.
         <source>TOP_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>TOP_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>TOP_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>TOP_EXPORT_DAT</source>
         <translation>Export to DAT file</translation>
@@ -3609,6 +3898,10 @@ Please check preferences of Mesh module.
         <source>TOP_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>TOP_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>TOP_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -3737,6 +4030,10 @@ Please check preferences of Mesh module.
         <source>TOP_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>TOP_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>TOP_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -3887,7 +4184,7 @@ Please check preferences of Mesh module.
     </message>
     <message>
         <source>TOP_DUPLICATE_NODES</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes or/and Elements</translation>
     </message>
     <message>
         <source>TOP_TRANSP</source>
@@ -3923,7 +4220,7 @@ Please check preferences of Mesh module.
     </message>
     <message>
         <source>TOP_UNDERLYING_ELEMS</source>
-        <translation>Create groups of entities from existing groups of superior dimensions</translation>
+        <translation>Create groups of entities basing on nodes of other groups</translation>
     </message>
     <message>
         <source>TOP_UPDATE</source>
@@ -3953,6 +4250,10 @@ Please check preferences of Mesh module.
         <source>UNKNOWN_CONTROL</source>
         <translation>Unknown</translation>
     </message>
+    <message>
+        <source>UPDATE_DESTINATION</source>
+        <translation>Update Destination</translation>
+    </message>
     <message>
         <source>VOLUME_3D_ELEMENTS</source>
         <translation>Volume</translation>
@@ -4084,20 +4385,103 @@ Input value precision can be adjusted using
         <translation>Selected object has been used to create another one.
 It can&apos;t be deleted </translation>
     </message>
+    <message>
+        <source>SMESH_FREERAM</source>
+        <translation>Free RAM</translation>
+    </message>
+    <message>
+        <source>SMESH_GIGABYTE</source>
+        <translation>%1 GB</translation>
+    </message>
+    <message>
+        <source>MEN_SORT_CHILD_ITEMS</source>
+        <translation>Sort children</translation>
+    </message>
+    <message>
+        <source>STB_SORT_CHILD_ITEMS</source>
+        <translation>Sort child items</translation>
+    </message>
+    <message>
+        <source>SMESH_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_ALGO_GROUP_BASIC</source>
+        <translation>Basic</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_BASIC</source>
+        <translation>Basic</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_PROGRESSION</source>
+        <translation>Progression</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_REGULAR</source>
+        <translation>Regular faces</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_FREE</source>
+        <translation>Free faces</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_REGULAR</source>
+        <translation>Regular volumes</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_FREE</source>
+        <translation>Free volumes</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_FieldSelectorWdg</name>
+    <message>
+        <source>FIELDS_TO_EXPORT</source>
+        <translation>Export Fields</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_AddMeshElementDlg</name>
+    <message>
+        <source>NB_ADDED</source>
+        <translation>%1 elements have been added since 0D
+elements already present on the selected nodes.</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Dialog</name>
     <message>
         <source>DLG_MESH</source>
-        <translation>meshes</translation>
+        <translation>mesh(s)</translation>
     </message>
     <message>
         <source>DLG_HYPO</source>
-        <translation>hypotheses</translation>
+        <translation>hypothesis(s)</translation>
     </message>
     <message>
         <source>DLG_ALGO</source>
-        <translation>algorithms</translation>
+        <translation>algorithm(s)</translation>
+    </message>
+    <message>
+        <source>DLG_GEOM</source>
+        <translation>object(s)</translation>
     </message>
 </context>
 <context>
@@ -4111,6 +4495,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_AUTO_GROUPS</source>
         <translation>Automatically create groups for MED export</translation>
     </message>
+    <message>
+        <source>PREF_SHOW_WARN</source>
+        <translation>Show warning when exporting group</translation>
+    </message>
     <message>
         <source>PREF_GROUP_SEGMENT_LENGTH</source>
         <translation>Automatic parameters</translation>
@@ -4143,6 +4531,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_UPDATE_LIMIT_NOLIMIT</source>
         <translation>No limit</translation>
     </message>
+    <message>
+        <source>PREF_INCREMENTAL_LIMIT</source>
+        <translation>Incremental limit check</translation>
+    </message>
     <message>
         <source>PREF_BACKFACE</source>
         <translation>Back surface color</translation>
@@ -4166,7 +4558,7 @@ Please, create VTK viewer and try again</translation>
     <message>
         <source>PREF_PRE_SELECTION</source>
         <translation>Pre-selection color</translation>
-    </message>    
+    </message>
     <message>
         <source>PREF_COLOR</source>
         <translation>Color</translation>
@@ -4188,17 +4580,25 @@ Please, create VTK viewer and try again</translation>
         <translation>Display entity</translation>
     </message>
     <message>
-        <source>QUADRATIC_REPRESENT_MODE</source>
+        <source>QUADRATIC_REPRESENT_MODE_GROUP</source>
         <translation>Representation of the 2D quadratic elements</translation>
     </message>
+    <message>
+        <source>QUADRATIC_REPRESENT_MODE</source>
+        <translation>Default mode of the 2D quadratic elements</translation>
+    </message>
     <message>
         <source>MAX_ARC_ANGLE</source>
         <translation>Maximum angle</translation>
     </message>
     <message>
-        <source>PREF_DISPLAY_MODE</source>
+        <source>PREF_DISPLAY_MODE_GROUP</source>
         <translation>Display mode</translation>
     </message>
+    <message>
+        <source>PREF_DISPLAY_MODE</source>
+        <translation>Default display mode</translation>
+    </message>
     <message>
         <source>PREF_ELEMENTS</source>
         <translation>Elements</translation>
@@ -4211,6 +4611,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_FILL</source>
         <translation>Surface color</translation>
     </message>
+    <message>
+        <source>PREF_PREVIEW_COLOR</source>
+        <translation>Preview color</translation>
+    </message>
     <message>
         <source>PREF_NOTIFY_MODE</source>
         <translation>Show a computation result notification</translation>
@@ -4255,10 +4659,18 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_DUMP_ADD_INFO</source>
         <translation>Dump additional information</translation>
     </message>
+    <message>
+        <source>PREF_DUMP_CTRL_INFO</source>
+        <translation>Dump controls information</translation>
+    </message>
     <message>
         <source>PREF_GPP_NODES_LIMIT</source>
         <translation>Automatic nodes compute limit</translation>
     </message>
+    <message>
+        <source>PREF_CTRL_LIMIT</source>
+        <translation>Automatic controls compute limit</translation>
+    </message>
     <message>
         <source>SMESH_PREF_GROUP_PRECISION</source>
         <translation>Input fields precision</translation>
@@ -4397,7 +4809,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_COLOR_0D</source>
-        <translation>0D elements</translation>
+        <translation>0D element color</translation>
     </message>
     <message>
         <source>PREF_SIZE_0D</source>
@@ -4405,12 +4817,20 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_BALL_COLOR</source>
-        <translation>Balls</translation>
+        <translation>Ball color</translation>
+    </message>
+    <message>
+        <source>PREF_BALL_DIAMETER</source>
+        <translation>Default diameter of ball elements</translation>
     </message>
     <message>
         <source>PREF_BALL_SIZE</source>
         <translation>Size of ball elements</translation>
     </message>
+    <message>
+        <source>PREF_BALL_SCALE</source>
+        <translation>Scale factor of ball elements</translation>
+    </message>
     <message>
         <source>PREF_WIDTH</source>
         <translation>Line width</translation>
@@ -4430,6 +4850,10 @@ Please, create VTK viewer and try again</translation>
         <source>ALLOW_ELEM_LIST_MODIF</source>
         <translation>Enable manual edition</translation>
     </message>
+    <message>
+        <source>SELECT_ALL</source>
+        <translation>Select All</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Add0DElemsOnAllNodesDlg</name>
@@ -4532,7 +4956,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>CREATE_COMMON_GROUPS</source>
-        <translation>Create common groups for initial meshes</translation>
+        <translation>Create groups from input objects</translation>
     </message>
     <message>
         <source>MERGE_NODES_AND_ELEMENTS</source>
@@ -4540,7 +4964,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>MESHES</source>
-        <translation>Meshes</translation>
+        <translation>Meshes, sub-meshes, groups</translation>
     </message>
     <message>
         <source>PROCESSING_IDENTICAL_GROUPS</source>
@@ -4609,6 +5033,21 @@ Please, create VTK viewer and try again</translation>
         <translation>Bad Mesh to Group</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_ComputeDlg_QThreadQDialog</name>
+    <message>
+        <source>CANCEL</source>
+        <translation>Cancel</translation>
+    </message>
+    <message>
+        <source>CANCELING</source>
+        <translation>Canceling...</translation>
+    </message>
+    <message>
+        <source>TITLE</source>
+        <translation>Compute</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_PrecomputeDlg</name>
     <message>
@@ -4636,9 +5075,7 @@ Please, create VTK viewer and try again</translation>
     <name>SMESHGUI_PrecomputeOp</name>
     <message>
         <source>CLEAR_SUBMESH_QUESTION</source>
-        <translation>Temporary submeshes on the selected geometry
-were created during preview operation.
-Do you want to remove all these submeshes?</translation>
+        <translation>Do you want to remove mesh entities generated during preview operation?</translation>
     </message>
     <message>
         <source>SMESH_WRN_NOTHING_PREVIEW</source>
@@ -4646,8 +5083,35 @@ Do you want to remove all these submeshes?</translation>
     </message>
     <message>
         <source>SMESH_REJECT_MESH_ORDER</source>
-        <translation>The submesh priority changed during preview operation.
-Do you want to restore original submesh priority?</translation>
+        <translation>The sub-mesh priority changed during preview operation.
+Do you want to restore original sub-mesh priority?</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_SplitBiQuadDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>MESH</source>
+        <translation>Mesh, Group or Sub-mesh</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_SplitBiQuadOp</name>
+    <message>
+        <source>MESH_IS_NOT_SELECTED</source>
+        <translation>No object to split is selected.
+Please specify it and try again</translation>
+    </message>
+    <message>
+        <source>REF_IS_NULL</source>
+        <translation>No valid mesh object selected</translation>
+    </message>
+    <message>
+        <source>DIFFERENT_MESHES</source>
+        <translation>Selected objects belong to different meshes</translation>
     </message>
 </context>
 <context>
@@ -4672,11 +5136,11 @@ Do you want to restore original submesh priority?</translation>
         <source>RADIOBTN_2</source>
         <translation>Convert to quadratic</translation>
     </message>
-      <message>
+    <message>
         <source>RADIOBTN_3</source>
         <translation>Convert to bi-quadratic</translation>
-      </message>
-      <message>
+    </message>
+    <message>
         <source>NON_CONFORM_WARNING</source>
         <translation>Warning: mesh can become non-conformal</translation>
     </message>
@@ -4743,7 +5207,7 @@ Please verify validity of entered information</translation>
     </message>
     <message>
         <source>MESH_OR_SUBMESH</source>
-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>
     </message>
     <message>
         <source>PATTERN</source>
@@ -4831,8 +5295,12 @@ Please select a group and try again</translation>
         <translation>Detect</translation>
     </message>
     <message>
-        <source>EDIT_SELECTED_GROUP</source>
-        <translation>Edit selected group</translation>
+        <source>EDIT_SELECTED_NODE_GROUP</source>
+        <translation>Edit selected group of coincident nodes</translation>
+    </message>
+    <message>
+        <source>EDIT_SELECTED_ELEM_GROUP</source>
+        <translation>Edit selected group of coincident elements</translation>
     </message>
     <message>
         <source>SELECT_ALL</source>
@@ -4848,7 +5316,27 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>EXCLUDE_GROUPS</source>
-        <translation>Exclude Groups</translation>
+        <translation>Exclude groups from detection</translation>
+    </message>
+    <message>
+        <source>SEPARATE_CORNERS_AND_MEDIUM</source>
+        <translation>No merge of corner and medium nodes of quadratic cells</translation>
+    </message>
+    <message>
+        <source>AVOID_MAKING_HOLES</source>
+        <translation>Avoid making holes</translation>
+    </message>
+    <message>
+        <source>KEEP_NODES</source>
+        <translation>Nodes to keep during the merge</translation>
+    </message>
+    <message>
+        <source>GROUP_SUBMESH</source>
+        <translation>Groups and sub-meshes</translation>
+    </message>
+    <message>
+        <source>SELECT</source>
+        <translation>Select: </translation>
     </message>
 </context>
 <context>
@@ -4907,7 +5395,7 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_PATH_MESH</source>
-        <translation>Mesh or submesh</translation>
+        <translation>Mesh or sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_PATH_SHAPE</source>
@@ -4948,6 +5436,26 @@ Please select a group and try again</translation>
         <source>EXTRUSION_ALONG_LINE</source>
         <translation>Extrusion along a line</translation>
     </message>
+    <message>
+        <source>BY_AVERAGE_NORMAL</source>
+        <translation>Along average normal</translation>
+    </message>
+    <message>
+        <source>USE_INPUT_ELEMS_ONLY</source>
+        <translation>Use only input elements</translation>
+    </message>
+    <message>
+        <source>SMESH_SCALES</source>
+        <translation>Scale Factors</translation>
+    </message>
+    <message>
+        <source>LINEAR_SCALES</source>
+        <translation>Linear Variation of Scale Factors</translation>
+    </message>
+    <message>
+        <source>BASE_POINT</source>
+        <translation>Scaling Center</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FilterDlg</name>
@@ -4958,7 +5466,7 @@ Please select valid object and try again</translation>
     </message>
     <message>
         <source>CURRENT_DIALOG</source>
-        <translation>Current Group</translation>
+        <translation>Current Dialog</translation>
     </message>
     <message>
         <source>EDGES_TLT</source>
@@ -4994,7 +5502,7 @@ Please select valid object and try again</translation>
     </message>
     <message>
         <source>SHAPE_IS_NOT_A_CYLINDER</source>
-        <translation>&quot;%1&quot; is not a cylinderical face
+        <translation>&quot;%1&quot; is not a cylindrical face
 Please select a cylindrical face and try again</translation>
     </message>
     <message>
@@ -5212,6 +5720,10 @@ Please check input data and try again</translation>
         <source>OVER_CONSTRAINED_FACE</source>
         <translation>Over-constrained faces</translation>
     </message>
+    <message>
+        <source>BELONG_TO_MESH_GROUP</source>
+        <translation>Belong to Mesh Group</translation>
+    </message>
     <message>
         <source>BELONG_TO_CYLINDER</source>
         <translation>Belong to Cylinder</translation>
@@ -5248,10 +5760,14 @@ Please check input data and try again</translation>
         <source>CONNECTED_ELEMS</source>
         <translation>Elements of a domain</translation>
     </message>
-  <message>
-    <source>NUMBEROFNODESINELEMENT</source>
-    <translation>Number Of Nodes In Element</translation>
-  </message>
+    <message>
+        <source>NODE_CONN_NUMBER</source>
+        <translation>Connectivity number</translation>
+    </message>
+    <message>
+        <source>NUMBEROFNODESINELEMENT</source>
+        <translation>Number Of Nodes In Element</translation>
+    </message>
     <message>
         <source>COPY_FROM</source>
         <translation>Copy from...</translation>
@@ -5417,7 +5933,7 @@ Please enter correct value and try again</translation>
     </message>
     <message>
         <source>ELEMENTS</source>
-        <translation>Elements</translation>
+        <translation>All</translation>
     </message>
     <message>
         <source>ENTITY_TYPE</source>
@@ -5605,8 +6121,8 @@ Please specify non-empty name and try again</translation>
 Please specify them and try again</translation>
     </message>
     <message>
-        <source>NAME</source>
-        <translation>Name</translation>
+        <source>RESULT</source>
+        <translation>Result</translation>
     </message>
     <message>
         <source>OBJECT_1</source>
@@ -5618,7 +6134,7 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>RESULT_NAME</source>
-        <translation>Result name</translation>
+        <translation>Group name</translation>
     </message>
     <message>
         <source>TOOL_OBJECT</source>
@@ -5629,13 +6145,6 @@ Please specify them and try again</translation>
         <translation>Union of two groups</translation>
     </message>
 </context>
-<context>
-    <name>SMESHGUI_GroupDlg</name>
-    <message>
-        <source>SELECT_ALL</source>
-        <translation>Select All</translation>
-    </message>
-</context>
 <context>
     <name>SMESHGUI_UnionGroupsDlg</name>
     <message>
@@ -5647,27 +6156,35 @@ Please specify them and try again</translation>
     <name>SMESHGUI_DimGroupDlg</name>
     <message>
         <source>CREATE_GROUP_OF_UNDERLYING_ELEMS</source>
-        <translation>Create group of underlying entities</translation>
+        <translation>Group based on nodes of other groups</translation>
     </message>
     <message>
         <source>ELEMENTS_TYPE</source>
         <translation>Elements type</translation>
     </message>
     <message>
-        <source>NODE</source>
-        <translation>Node</translation>
+        <source>UNDERLYING_ENTITIES_ONLY</source>
+        <translation>Include underlying entities only</translation>
     </message>
     <message>
-        <source>EDGE</source>
-        <translation>Edge</translation>
+        <source>NUMBER_OF_COMMON_NODES</source>
+        <translation>Number of common nodes</translation>
     </message>
     <message>
-        <source>FACE</source>
-        <translation>Face</translation>
+        <source>ALL</source>
+        <translation>All</translation>
     </message>
     <message>
-        <source>VOLUME</source>
-        <translation>Volume</translation>
+        <source>MAIN</source>
+        <translation>Main</translation>
+    </message>
+    <message>
+        <source>AT_LEAST_ONE</source>
+        <translation>At least one</translation>
+    </message>
+    <message>
+        <source>MAJORITY</source>
+        <translation>Majority</translation>
     </message>
 </context>
 <context>
@@ -5796,8 +6313,12 @@ Please specify them and try again</translation>
         <translation>3D</translation>
     </message>
     <message>
-        <source>EDIT_MESH_SUBMESH</source>
-        <translation>Edit mesh/sub-mesh</translation>
+        <source>EDIT_MESH</source>
+        <translation>Edit mesh</translation>
+    </message>
+    <message>
+        <source>EDIT_SUBMESH</source>
+        <translation>Edit sub-mesh</translation>
     </message>
     <message>
         <source>GEOMETRY</source>
@@ -5811,6 +6332,10 @@ Please specify them and try again</translation>
         <source>MESH</source>
         <translation>Mesh</translation>
     </message>
+    <message>
+        <source>MESH_TYPE</source>
+        <translation>Mesh type</translation>
+    </message>
     <message>
         <source>NAME</source>
         <translation>Name</translation>
@@ -5824,16 +6349,22 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>EDIT_SUBMESH_QUESTION</source>
-        <translation>A submesh on the selected geometry already exists.
- Do you want to edit this submesh?</translation>
+        <translation>A sub-mesh on the selected geometry already exists.
+ Do you want to edit this sub-mesh?</translation>
     </message>
     <message>
         <source>SUBMESH_NOT_ALLOWED</source>
-        <translation>No sense in creating a submesh ignored by global algorithm &quot;%1&quot;</translation>
+        <translation>No sense in creating a sub-mesh ignored by global algorithm &quot;%1&quot;</translation>
+    </message>
+    <message>
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
+        <translation>Geometry object is not defined.
+Do you want to create an empty mesh 
+without algorithms and hypotheses? </translation>
     </message>
     <message>
-        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED</source>
-        <translation>Geometry object is not defined
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_SUBMESH</source>
+        <translation>Geometry object is not defined.
 Please specify it and try again</translation>
     </message>
     <message>
@@ -5865,6 +6396,26 @@ Please specify it and try again</translation>
         <source>MESH_IS_NULL</source>
         <translation>Mesh is null</translation>
     </message>
+    <message>
+        <source>MT_ANY</source>
+        <translation>Any</translation>
+    </message>
+    <message>
+        <source>MT_HEXAHEDRAL</source>
+        <translation>Hexahedral</translation>
+    </message>
+    <message>
+        <source>MT_TETRAHEDRAL</source>
+        <translation>Tetrahedral</translation>
+    </message>
+    <message>
+        <source>MT_TRIANGULAR</source>
+        <translation>Triangular</translation>
+    </message>
+    <message>
+        <source>MT_QUADRILATERAL</source>
+        <translation>Quadrilateral</translation>
+    </message>
     <message>
         <source>NAME_OF_MESH_IS_EMPTY</source>
         <translation>Name of mesh is empty
@@ -5872,7 +6423,7 @@ Please enter valid name and try again</translation>
     </message>
     <message>
         <source>NAME_OF_SUBMESH_IS_EMPTY</source>
-        <translation>Name of submesh is empty
+        <translation>Name of sub-mesh is empty
 Please enter valid name and try again</translation>
     </message>
     <message>
@@ -5880,6 +6431,14 @@ Please enter valid name and try again</translation>
         <translation>There is no object for editing. Please
 select mesh or sub-mesh and try again</translation>
     </message>
+    <message>
+        <source>CONCURRENT_SUBMESH_APPEARS</source>
+        <translation> 
+The assigned algorithm has the same priority as one assigned to an 
+adjacent sub-mesh, hence it&apos;s undefined which algorithm to use for
+meshing boundary shared by two sub-meshes. Would you like to set
+the order of sub-mesh computation? </translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshPatternDlg</name>
@@ -6042,6 +6601,14 @@ It is impossible to read point coordinates from file</translation>
         <source>NONE</source>
         <translation>&lt;None&gt;</translation>
     </message>
+    <message>
+        <source>DEFAULT</source>
+        <translation>&lt;Default&gt;</translation>
+    </message>
+    <message>
+        <source>SELECT</source>
+        <translation>&lt;Select&gt;</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MultiEditDlg</name>
@@ -6087,10 +6654,10 @@ It is impossible to read point coordinates from file</translation>
     </message>
 </context>
 <context>
-    <name>SMESHGUI_CuttingIntoTetraDlg</name>
+    <name>SMESHGUI_SplitVolumesDlg</name>
     <message>
         <source>CAPTION</source>
-        <translation>Splitting volumes into tetrahedra</translation>
+        <translation>Splitting volumes</translation>
     </message>
     <message>
         <source>SPLIT_METHOD</source>
@@ -6108,6 +6675,34 @@ It is impossible to read point coordinates from file</translation>
         <source>SPLIT_HEX_TO_24_TETRA</source>
         <translation>Into 24 tetrahedra</translation>
     </message>
+    <message>
+        <source>SPLIT_HEX_TO_2_PRISMS</source>
+        <translation>Into 2 prisms</translation>
+    </message>
+    <message>
+        <source>SPLIT_HEX_TO_4_PRISMS</source>
+        <translation>Into 4 Prisms</translation>
+    </message>
+    <message>
+        <source>TARGET_ELEM_TYPE</source>
+        <translation>Target element type</translation>
+    </message>
+    <message>
+        <source>FACET_TO_SPLIT</source>
+        <translation>Facet to split</translation>
+    </message>
+    <message>
+        <source>START_POINT</source>
+        <translation>Hexa location</translation>
+    </message>
+    <message>
+        <source>FACET_NORMAL</source>
+        <translation>Facet normal</translation>
+    </message>
+    <message>
+        <source>ALL_DOMAINS</source>
+        <translation>All domains</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_PrecisionDlg</name>
@@ -6135,8 +6730,8 @@ It is impossible to read point coordinates from file</translation>
         <translation>Preview</translation>
     </message>
     <message>
-        <source>REVOLUTION_1D</source>
-        <translation>Revolution of 1D elements</translation>
+        <source>REVOLUTION</source>
+        <translation>Revolution</translation>
     </message>
     <message>
         <source>REVOLUTION_2D</source>
@@ -6269,6 +6864,42 @@ It is impossible to read point coordinates from file</translation>
         <source>SIDE_2</source>
         <translation>Side 2</translation>
     </message>
+    <message>
+        <source>AUTO_SEWING</source>
+        <translation>Auto Sewing</translation>
+    </message>
+    <message>
+        <source>COINCIDENT_FREE_BORDERS</source>
+        <translation>Coincident Free Borders</translation>
+    </message>
+    <message>
+        <source>DETECT</source>
+        <translation>Detect</translation>
+    </message>
+    <message>
+        <source>SELECT_ALL</source>
+        <translation>Select all</translation>
+    </message>
+    <message>
+        <source>EDIT_SELECTED_GROUP</source>
+        <translation>Edit Selected Group</translation>
+    </message>
+    <message>
+        <source>STEP</source>
+        <translation>Step</translation>
+    </message>
+    <message>
+        <source>NO_BORDERS_TO_SEW</source>
+        <translation>No free borders to sew found</translation>
+    </message>
+    <message>
+        <source>NOT_ALL_BORDERS_SEWED</source>
+        <translation>%1 of %2 groups of borders sewed</translation>
+    </message>
+    <message>
+        <source>ALL_BORDERS_SEWED</source>
+        <translation>%1 group(s) of borders sewed</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_ShapeByMeshDlg</name>
@@ -6365,19 +6996,27 @@ It is impossible to read point coordinates from file</translation>
         <source>SMESH_CREATE_GROUP_FROM_GEOM</source>
         <translation>Create Groups from Geometry</translation>
     </message>
+    <message>
+        <source>ELEMENTS</source>
+        <translation>Elements</translation>
+    </message>
+    <message>
+        <source>ELEMENTS_TOOLTIP</source>
+        <translation>No 0D elements</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOrderDlg</name>
     <message>
         <source>SMESH_MESHORDER_TITLE</source>
-        <translation>Order of submesh in meshing process</translation>
+        <translation>Order of sub-mesh in meshing process</translation>
     </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOrderOp</name>
     <message>
         <source>SMESH_NO_CONCURENT_MESH</source>
-        <translation>No concurent submeshes detected</translation>
+        <translation>No concurent sub-meshes detected</translation>
     </message>
 </context>
 <context>
@@ -6386,6 +7025,10 @@ It is impossible to read point coordinates from file</translation>
         <source>CLIP_PLANES</source>
         <translation>Clipping planes</translation>
     </message>
+    <message>
+        <source>IS_OPENGL_CLIPPING</source>
+        <translation>OpenGL clipping</translation>
+    </message>
     <message>
         <source>MESHES_SUBMESHES_GROUPS</source>
         <translation>Meshes, sub-meshes and groups</translation>
@@ -6446,6 +7089,30 @@ It is impossible to read point coordinates from file</translation>
         <source>NO_PLANES</source>
         <translation>No planes</translation>
     </message>
+    <message>
+        <source>ABSOLUTE</source>
+        <translation>Absolute</translation>
+    </message>
+    <message>
+        <source>RELATIVE</source>
+        <translation>Relative</translation>
+    </message>
+    <message>
+        <source>BASE_POINT</source>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>DIRECTION</source>
+        <translation>Direction</translation>
+    </message>
+    <message>
+        <source>RESET</source>
+        <translation>Reset</translation>
+    </message>
+    <message>
+        <source>INVERT</source>
+        <translation>Invert</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_DuplicateNodesDlg</name>
@@ -6455,7 +7122,7 @@ It is impossible to read point coordinates from file</translation>
     </message>
     <message>
         <source>DUPLICATION_WITHOUT_ELEMS</source>
-        <translation>Without duplication of border elements</translation>
+        <translation>Duplicate nodes only</translation>
     </message>
     <message>
         <source>GROUP_NODES_TO_DUPLICATE</source>
@@ -6467,7 +7134,15 @@ It is impossible to read point coordinates from file</translation>
     </message>
     <message>
         <source>DUPLICATION_WITH_ELEMS</source>
-        <translation>With duplication of border elements</translation>
+        <translation>Duplicate nodes and border elements</translation>
+    </message>
+    <message>
+        <source>DUPLICATION_ONLY_ELEMS</source>
+        <translation>Duplicate elements only</translation>
+    </message>
+    <message>
+        <source>DUPLICATION_GROUP_BOUNDARY</source>
+        <translation>Duplicate nodes on group boundaries</translation>
     </message>
     <message>
         <source>GROUP_ELEMS_TO_DUPLICATE</source>
@@ -6481,6 +7156,10 @@ It is impossible to read point coordinates from file</translation>
         <source>GROUP_ELEMS_TO_REPLACE</source>
         <translation>Group of elements to replace nodes with new ones</translation>
     </message>
+    <message>
+        <source>GROUP_VOLUME_GROUPS</source>
+        <translation>Groups (faces or volumes)</translation>
+    </message>
     <message>
         <source>CONSTRUCT_NEW_GROUP_NODES</source>
         <translation>Construct group with newly created nodes</translation>
@@ -6489,6 +7168,14 @@ It is impossible to read point coordinates from file</translation>
         <source>CONSTRUCT_NEW_GROUP_ELEMENTS</source>
         <translation>Construct group with newly created elements</translation>
     </message>
+    <message>
+        <source>CREATE_JOINT_ELEMENTS</source>
+        <translation>Create joint elements</translation>
+    </message>
+    <message>
+        <source>ON_ALL_BOUNDARIES</source>
+        <translation>On all boundaries</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Make2DFrom3DDlg</name>
@@ -6563,7 +7250,7 @@ as they are of improper type:
     </message>
     <message>
         <source>SMESH_NOT_ONLY_GROUPS</source>
-        <translation>Can't process meshes and groups at once</translation>
+        <translation>Can&apos;t process meshes and groups at once</translation>
     </message>
     <message>
         <source>SMESH_ERR_NO_3D_ELEMENTS</source>
@@ -6616,6 +7303,10 @@ as they are of improper type:
         <source>QUADRATIC_LAB</source>
         <translation>Quadratic</translation>
     </message>
+    <message>
+        <source>BI_QUADRATIC_LAB</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
     <message>
         <source>0D_LAB</source>
         <translation>0D:</translation>
@@ -6731,6 +7422,10 @@ as they are of improper type:
         <source>ADDITIONAL_INFO</source>
         <translation>Additional Info</translation>
     </message>
+    <message>
+        <source>CTRL_INFO</source>
+        <translation>Quality Info</translation>
+    </message>
     <message>
         <source>NODE_MODE</source>
         <translation>Node</translation>
@@ -6739,6 +7434,10 @@ as they are of improper type:
         <source>ELEM_MODE</source>
         <translation>Element</translation>
     </message>
+    <message>
+        <source>SHOW_IDS</source>
+        <translation>Show IDs</translation>
+    </message>
     <message>
         <source>BUT_DUMP_MESH</source>
         <translation>&amp;Dump</translation>
@@ -6774,6 +7473,10 @@ as they are of improper type:
         <source>GRAVITY_CENTER</source>
         <translation>Gravity Center</translation>
     </message>
+    <message>
+        <source>NORMAL_VECTOR</source>
+        <translation>Normal</translation>
+    </message>
     <message>
         <source>NODE</source>
         <translation>Node</translation>
@@ -6922,8 +7625,8 @@ as they are of improper type:
 <context>
     <name>SMESHGUI_TreeElemInfo</name>
     <message>
-      <source>SHOW_ITEM_INFO</source>
-      <translation>Show info</translation>
+        <source>SHOW_ITEM_INFO</source>
+        <translation>Show info</translation>
     </message>
     <message>
         <source>PROPERTY</source>
@@ -7097,6 +7800,100 @@ as they are of improper type:
         <translation>Vertex</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_CtrlInfo</name>
+    <message>
+        <source>CTRL_INFO</source>
+        <translation>Quality information</translation>
+    </message>
+    <message>
+        <source>NAME_LAB</source>
+        <translation>Name:</translation>
+    </message>
+    <message>
+        <source>VALUE</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>BUT_COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+    <message>
+        <source>NODES_INFO</source>
+        <translation>Nodes Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_FREE_NODES</source>
+        <translation>Number of the free nodes</translation>
+    </message>
+    <message>
+        <source>MAX_NODE_CONNECTIVITY</source>
+        <translation>Max. number of connected elements</translation>
+    </message>
+    <message>
+        <source>DOUBLE_NODES_TOLERANCE</source>
+        <translation>Double nodes tolerance</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_NODES</source>
+        <translation>Number of the double nodes</translation>
+    </message>
+    <message>
+        <source>EDGES_INFO</source>
+        <translation>Edges Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_EDGES</source>
+        <translation>Number of the double edges</translation>
+    </message>
+    <message>
+        <source>FACES_INFO</source>
+        <translation>Faces Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_FACES</source>
+        <translation>Number of the double faces</translation>
+    </message>
+    <message>
+        <source>ASPECT_RATIO_HISTOGRAM</source>
+        <translation>Aspect Ratio histogram</translation>
+    </message>
+    <message>
+        <source>VOLUMES_INFO</source>
+        <translation>Volumes Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_VOLUMES</source>
+        <translation>Number of the double volumes</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_OVER_CONSTRAINED</source>
+        <translation>Number of the over-constrained</translation>
+    </message>
+    <message>
+        <source>ASPECT_RATIO_3D_HISTOGRAM</source>
+        <translation>Aspect Ratio 3D histogram</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_CtrlInfoDlg</name>
+    <message>
+        <source>CTRL_INFO</source>
+        <translation>Quality Info</translation>
+    </message>
+    <message>
+        <source>BUT_DUMP_MESH</source>
+        <translation>&amp;Dump</translation>
+    </message>
+    <message>
+        <source>TEXT_FILES</source>
+        <translation>Text files (*.txt)</translation>
+    </message>
+    <message>
+        <source>SAVE_INFO</source>
+        <translation>Save info</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_MinDistance</name>
     <message>
@@ -7136,6 +7933,33 @@ as they are of improper type:
         <translation>Distance</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_BasicProperties</name>
+    <message>
+        <source>PROPERTY</source>
+        <translation>Property</translation>
+    </message>
+    <message>
+        <source>LENGTH</source>
+        <translation>Length</translation>
+    </message>
+    <message>
+        <source>AREA</source>
+        <translation>Area</translation>
+    </message>
+    <message>
+        <source>VOLUME</source>
+        <translation>Volume</translation>
+    </message>
+    <message>
+        <source>SOURCE_MESH_SUBMESH_GROUP</source>
+        <translation>Source (mesh, sub-mesh or group)</translation>
+    </message>
+    <message>
+        <source>COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_CopyMeshDlg</name>
     <message>
@@ -7165,6 +7989,10 @@ as they are of improper type:
         <source>BND_BOX</source>
         <translation>Bounding Box</translation>
     </message>
+    <message>
+        <source>BASIC_PROPERTIES</source>
+        <translation>Basic Properties</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_BoundingBox</name>
@@ -7223,7 +8051,7 @@ as they are of improper type:
     <name>SMESHGUI_ReorientFacesDlg</name>
     <message>
         <source>CAPTION</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>REORIENT_FACES</source>
@@ -7253,6 +8081,14 @@ as they are of improper type:
         <source>ORIENTATION</source>
         <translation>Orientation</translation>
     </message>
+    <message>
+        <source>VOLUMES</source>
+        <translation>Volumes</translation>
+    </message>
+    <message>
+        <source>OUTSIDE_VOLUME_NORMAL</source>
+        <translation>Face normal outside volume</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_ReorientFacesOp</name>
@@ -7260,10 +8096,18 @@ as they are of improper type:
         <source>NO_OBJECT_SELECTED</source>
         <translation>No object selected</translation>
     </message>
+    <message>
+        <source>NO_VOLUME_OBJECT_SELECTED</source>
+        <translation>No volume object selected</translation>
+    </message>
     <message>
         <source>NO_FACES</source>
         <translation>Object includes no faces</translation>
     </message>
+    <message>
+        <source>NO_VOLUMES</source>
+        <translation>Volume object includes no volumes</translation>
+    </message>
     <message>
         <source>ZERO_SIZE_VECTOR</source>
         <translation>Zero size vector</translation>
@@ -7344,7 +8188,7 @@ as they are of improper type:
         <translation>Size:</translation>
     </message>
     <message>
-        <source>ORIENTATION_SCALE</source>
+        <source>SCALE_FACTOR</source>
         <translation>Scale:</translation>
     </message>
     <message>
@@ -7356,4 +8200,30 @@ as they are of improper type:
         <translation>Shrink coef:</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_DisplayEntitiesDlg</name>
+    <message>
+        <source>WRN_AT_LEAST_ONE</source>
+        <translation>At least one entity type should be chosen!</translation>
+    </message>
+</context>
+<context>
+    <name>SMESH_AdvOptionsWdg</name>
+    <message>
+        <source>ADD_OPTION_BTN</source>
+        <translation>Add option</translation>
+    </message>
+    <message>
+        <source>CHOICE</source>
+        <translation>Choice</translation>
+    </message>
+    <message>
+        <source>OPTION_NAME</source>
+        <translation>Option name</translation>
+    </message>
+    <message>
+        <source>OPTION_VALUE</source>
+        <translation>Option value</translation>
+    </message>
+</context>
 </TS>