Merge remote branch 'origin/V8_5_asterstudy'

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index afca8a694dffbe90b329cba8fdaa4d98755cdcf3..75d649a726f19b4b7b69f63efbe1a24faa1a52b6 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -11,6 +11,10 @@
         <source>MED_FILES_FILTER</source>
         <translation>MED files</translation>
     </message>
+    <message>
+        <source>SAUV_FILES_FILTER</source>
+        <translation>SAUV files</translation>
+    </message>
     <message>
         <source>IDEAS_FILES_FILTER</source>
         <translation>IDEAS files</translation>
@@ -39,6 +43,10 @@
         <source>CGNS_FILES_FILTER</source>
         <translation>CGNS files</translation>
     </message>
+    <message>
+        <source>CGNS_EXPORT_ELEMS_BY_TYPE</source>
+        <translation>Group elements by type</translation>
+    </message>
     <message>
         <source>GMF_ASCII_FILES_FILTER</source>
         <translation>GMF ASCII files</translation>
@@ -63,10 +71,46 @@
         <source>AREA_ELEMENTS</source>
         <translation>Area</translation>
     </message>
+    <message>
+        <source>FREE_NODES</source>
+        <translation>Free nodes</translation>
+    </message>
+    <message>
+        <source>NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
+    <message>
+        <source>FREE_EDGES</source>
+        <translation>Free edges</translation>
+    </message>
+    <message>
+        <source>FREE_FACES</source>
+        <translation>Free faces</translation>
+    </message>
+    <message>
+        <source>BARE_BORDER_FACE</source>
+        <translation>Faces with bare border</translation>
+    </message>
+    <message>
+        <source>OVER_CONSTRAINED_FACE</source>
+        <translation>Over-constrained faces</translation>
+    </message>
+    <message>
+        <source>BARE_BORDER_VOLUME</source>
+        <translation>Volumes with bare border</translation>
+    </message>
+    <message>
+        <source>OVER_CONSTRAINED_VOLUME</source>
+        <translation>Over-constrained volumes</translation>
+    </message>
     <message>
         <source>MIN_DIAG_ELEMENTS</source>
         <translation>Minimum diagonal</translation>
     </message>
+    <message>
+        <source>MIN_ELEM_EDGE</source>
+        <translation>Minimum Edge Length</translation>
+    </message>
     <message>
         <source>ASPECTRATIO_3D_ELEMENTS</source>
         <translation>Aspect Ratio 3D</translation>
@@ -188,6 +232,10 @@
         <source>LENGTH2D_EDGES</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>DEFLECTION2D_FACES</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>LENGTH_EDGES</source>
         <translation>Length</translation>
@@ -204,6 +252,10 @@
         <source>MAX_ELEMENT_LENGTH_3D</source>
         <translation>Element Diameter 3D</translation>
     </message>
+    <message>
+        <source>DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>MEN_ADD</source>
         <translation>Add</translation>
@@ -256,6 +308,10 @@
         <source>MEN_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>MEN_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>MEN_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -286,7 +342,7 @@
     </message>
     <message>
         <source>MEN_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>MEN_CREATE_GROUP</source>
@@ -348,6 +404,22 @@
         <source>MEN_DEL_GROUP</source>
         <translation>Delete Groups with Contents</translation>
     </message>
+    <message>
+        <source>MEN_ADD_TO_GROUP</source>
+        <translation>Add to Group</translation>
+    </message>
+    <message>
+        <source>MEN_REMOVE_FROM_GROUP</source>
+        <translation>Remove from Group</translation>
+    </message>
+    <message>
+        <source>STB_ADD_TO_GROUP</source>
+        <translation>Add selected elements to group</translation>
+    </message>
+    <message>
+        <source>STB_REMOVE_FROM_GROUP</source>
+        <translation>Remove selected elements from group</translation>
+    </message>
     <message>
         <source>MEN_FACE_ORIENTATION</source>
         <translation>Orientation of Faces</translation>
@@ -396,6 +468,10 @@
         <source>MEN_EDGES</source>
         <translation>Edges</translation>
     </message>
+    <message>
+        <source>MEN_CHOOSE</source>
+        <translation>Choose...</translation>
+    </message>
     <message>
         <source>MEN_EDIT</source>
         <translation>Edit</translation>
@@ -416,6 +492,14 @@
         <source>MEN_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>MEN_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>MEN_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>MEN_EXPORT</source>
         <translation>Export</translation>
@@ -470,15 +554,15 @@
     </message>
     <message>
         <source>TOP_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>MEN_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>STB_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>TOP_FIND_ELEM</source>
@@ -580,6 +664,10 @@
         <source>MEN_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>MEN_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>MEN_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -620,6 +708,10 @@
         <source>MEN_LENGTH_2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>MEN_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>MEN_MAP</source>
         <translation>Pattern Mapping</translation>
@@ -744,7 +836,7 @@
         <source>TOP_MEASURE_AREA</source>
         <translation>Area</translation>
     </message>
-     <message>
+    <message>
         <source>MEN_MEASURE_VOLUME</source>
         <translation>Volume</translation>
     </message>
@@ -788,6 +880,10 @@
         <source>MEN_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>MEN_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>MEN_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -816,6 +912,10 @@
         <source>MEN_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>MEN_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>MEN_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -928,6 +1028,10 @@
         <source>MEN_SHADE</source>
         <translation>Shading</translation>
     </message>
+    <message>
+        <source>MEN_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>MEN_QUADRATIC_REPRESENT</source>
         <translation>2D Quadratic</translation>
@@ -992,6 +1096,10 @@
         <source>MEN_SCALE</source>
         <translation>Scale Transform</translation>
     </message>
+    <message>
+        <source>MEN_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
     <message>
         <source>MEN_DUPLICATE_NODES</source>
         <translation>Duplicate Nodes or/and Elements</translation>
@@ -1034,7 +1142,7 @@
     </message>
     <message>
         <source>MEN_UNDERLYING_ELEMS</source>
-        <translation>Group of underlying entities</translation>
+        <translation>Group based on nodes of other groups</translation>
     </message>
     <message>
         <source>MEN_UPDATE</source>
@@ -1066,15 +1174,31 @@
     </message>
     <message>
         <source>MEN_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>TOP_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
+    </message>
+    <message>
+        <source>STB_OVERALL_MESH_QUALITY</source>
+        <translation>Overall Mesh Quality</translation>
     </message>
     <message>
         <source>STB_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
+    </message>
+    <message>
+        <source>MEN_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>TOP_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>STB_SPLIT_BIQUAD</source>
+        <translation>Split bi-quadratic into linear</translation>
     </message>
     <message>
         <source>MESHERS_FILE_CANT_OPEN</source>
@@ -1119,8 +1243,13 @@ Please, select a mesh and try again</translation>
 Please enter a name of new group to be created or choose an existing one.</translation>
     </message>
     <message>
-        <source>MESH_STANDALONE_GRP_CHOSEN</source>
+        <source>MESH_GEOM_GRP_CHOSEN</source>
         <translation>Group on geometry is chosen: %1.
+Do you want to convert it to the standalone group?</translation>
+    </message>
+    <message>
+        <source>MESH_FILTER_GRP_CHOSEN</source>
+        <translation>Group on filter is chosen: %1.
 Do you want to convert it to the standalone group?</translation>
     </message>
     <message>
@@ -1164,6 +1293,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_ELEM0D_TITLE</source>
         <translation>Add 0D Element</translation>
     </message>
+    <message>
+        <source>SMESH_DUPLICATE_0D</source>
+        <translation>Allow duplicate elements</translation>
+    </message>
     <message>
         <source>SMESH_ADD_BALL</source>
         <translation>Add Ball Element</translation>
@@ -1217,6 +1350,14 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_POLYGON_TITLE</source>
         <translation>Add Polygon</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON</source>
+        <translation>Add Quadratic polygon</translation>
+    </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON_TITLE</source>
+        <translation>Add Quadratic Polygon</translation>
+    </message>
     <message>
         <source>SMESH_ADD_PENTA</source>
         <translation>Add pentahedron</translation>
@@ -1257,6 +1398,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_QUADRATIC_PENTAHEDRON_TITLE</source>
         <translation>Add Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_BIQUADRATIC_PENTAHEDRON_TITLE</source>
+        <translation>Add BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>SMESH_ADD_QUADRATIC_PYRAMID_TITLE</source>
         <translation>Add Quadratic Pyramid</translation>
@@ -1283,7 +1428,7 @@ Please enter correct values and try again</translation>
     </message>
     <message>
         <source>SMESH_ADD_SUBMESH</source>
-        <translation>SubMesh Construction</translation>
+        <translation>Sub-mesh Construction</translation>
     </message>
     <message>
         <source>SMESH_ADD_TETRAS</source>
@@ -1643,20 +1788,18 @@ Probably, there is not enough space on disk.</translation>
 You can cancel exporting and rename them,
 otherwise some group names in the resulting file
 will not match ones in the study.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_DUPLICATED_MESH_NAMES</source>
         <translation>There are some mesh objects with the same names in the selection.
 The result file may be incorrect.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
     </message>
     <message>
-        <source>SMESH_EXPORT_MED_V2_1</source>
-        <translation>During export mesh with name - &quot;%1&quot; to MED 2.1
-polygons and polyhedrons elements will be missed
-For correct export use MED 2.2
-Are you sure want to export to MED 2.1 ?</translation>
+        <source>SMESH_EXPORT_ONLY_GPOUP</source>
+        <translation>You are going to export the group without its mesh.
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXPORT_MED_VERSION_COLLISION</source>
@@ -1675,7 +1818,7 @@ Overwrite the file?</translation>
         <source>EXPORT_NOT_SUPPORTED</source>
         <translation>During export mesh with name &quot;%1&quot; to %2
 %3 will be missed.
-Do you want to continue ?</translation>
+Do you want to continue?</translation>
     </message>
     <message>
         <source>SMESH_EXTRUSION</source>
@@ -1689,6 +1832,10 @@ Do you want to continue ?</translation>
         <source>SMESH_EXTRUSION_ALONG_VECTOR</source>
         <translation>Extrusion Along Vector</translation>
     </message>
+    <message>
+        <source>SMESH_EXTRUSION_BY_NORMAL</source>
+        <translation>Extrusion By Normal</translation>
+    </message>
     <message>
         <source>SMESH_FACE</source>
         <translation>Face</translation>
@@ -1780,7 +1927,7 @@ add the exported data to its contents?</translation>
         <translation>Hexahedrons</translation>
     </message>
     <message>
-        <source>SMESH_HILIGHT_COLOR</source>
+        <source>SMESH_HIGHLIGHT_COLOR</source>
         <translation>Highlight Color</translation>
     </message>
     <message>
@@ -1797,7 +1944,7 @@ add the exported data to its contents?</translation>
     </message>
     <message>
         <source>SMESH_HYP_10</source>
-        <translation>Hypothesis and submesh dimensions mismatch</translation>
+        <translation>Hypothesis and sub-mesh dimensions mismatch</translation>
     </message>
     <message>
         <source>SMESH_HYP_11</source>
@@ -1822,7 +1969,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_HYP_4</source>
-        <translation>Submesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
+        <translation>Sub-mesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
     </message>
     <message>
         <source>SMESH_HYP_5</source>
@@ -1842,23 +1989,27 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_HYP_9</source>
-        <translation>Such dimention hypothesis is already assigned to the shape</translation>
+        <translation>Such dimension hypothesis is already assigned to the shape</translation>
     </message>
     <message>
         <source>SMESH_ID_DIAGONAL</source>
-        <translation>Id Edges</translation>
+        <translation>Edges IDs</translation>
+    </message>
+    <message>
+        <source>SMESH_ID_EDGES</source>
+        <translation>Edge IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_ELEMENTS</source>
-        <translation>Id Elements</translation>
+        <translation>Element IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_FACES</source>
-        <translation>Id Faces</translation>
+        <translation>Face IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_NODES</source>
-        <translation>Id Nodes</translation>
+        <translation>Node IDs</translation>
     </message>
     <message>
         <source>SMESH_INCORRECT_INPUT</source>
@@ -1930,23 +2081,23 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnCompound</source>
-        <translation>SubMeshes On Compound</translation>
+        <translation>Sub-meshes On Compound</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnEdge</source>
-        <translation>SubMeshes On Edge</translation>
+        <translation>Sub-meshes On Edge</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnFace</source>
-        <translation>SubMeshes On Face</translation>
+        <translation>Sub-meshes On Face</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnSolid</source>
-        <translation>SubMeshes On Solid</translation>
+        <translation>Sub-meshes On Solid</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnVertex</source>
-        <translation>SubMeshes On Vertex</translation>
+        <translation>Sub-meshes On Vertex</translation>
     </message>
     <message>
         <source>SMESH_AUTOMATIC</source>
@@ -1998,7 +2149,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_MESHINFO_ALL_TYPES</source>
-        <translation>Heterogenous</translation>
+        <translation>Heterogeneous</translation>
     </message>
     <message>
         <source>SMESH_MESHINFO_EDGES</source>
@@ -2040,6 +2191,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_MESHINFO_ORDER2</source>
         <translation>Quadratic</translation>
     </message>
+    <message>
+        <source>SMESH_MESHINFO_ORDER3</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
     <message>
         <source>SMESH_MESHINFO_HEXAPRISM</source>
         <translation>Hexagonal prisms</translation>
@@ -2156,9 +2311,13 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_OBJECT_MESH</source>
         <translation>Mesh</translation>
     </message>
+    <message>
+        <source>SMESH_OBJECTS</source>
+        <translation>Objects</translation>
+    </message>
     <message>
         <source>SMESH_OBJECT_MESHorSUBMESH</source>
-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_OPERATION_FAILED</source>
@@ -2300,9 +2459,9 @@ Check algorithm documentation for supported geometry</translation>
         <source>PREF_NUMBERING_NODE</source>
         <translation>Nodes: Color</translation>
     </message>
-     <message>
+    <message>
         <source>PREF_NUMBERING_ELEM</source>
-        <translation>Edges: Color</translation>
+        <translation>Elements: Color</translation>
     </message>
     <message>
         <source>PREF_NUMBERING_FONT</source>
@@ -2396,10 +2555,18 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>SMESH_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>SMESH_QUADRATIC_PENTAHEDRONS</source>
         <translation>Quadratic Pentahedrons</translation>
     </message>
+    <message>
+        <source>SMESH_BIQUADRATIC_PENTAHEDRONS</source>
+        <translation>BiQuadratic Pentahedrons</translation>
+    </message>
     <message>
         <source>SMESH_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -2565,6 +2732,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_SEWING</source>
         <translation>Sewing</translation>
     </message>
+    <message>
+        <source>SMESH_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>SMESH_SMOOTHING</source>
         <translation>Smoothing</translation>
@@ -2575,11 +2746,11 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_SUBMESH</source>
-        <translation>SubMesh</translation>
+        <translation>Sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_SUBMESH_SELECTED</source>
-        <translation>%1 SubMeshes</translation>
+        <translation>%1 Sub-meshes</translation>
     </message>
     <message>
         <source>SMESH_SYMMETRY</source>
@@ -2784,6 +2955,10 @@ Use Display Entity menu command to show them.
         <source>SMESH_WRN_WARNING</source>
         <translation>Warning</translation>
     </message>
+    <message>
+        <source>SMESH_WRN_SHOW_DLG_CHECKBOX</source>
+        <translation>Don't show this warning anymore.</translation>
+    </message>
     <message>
         <source>SMESH_X</source>
         <translation>X</translation>
@@ -2872,6 +3047,10 @@ Use Display Entity menu command to show them.
         <source>STB_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>STB_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>STB_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -2902,7 +3081,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>STB_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>STB_CREATE_GROUP</source>
@@ -3004,6 +3183,14 @@ Use Display Entity menu command to show them.
         <source>STB_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>STB_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>STB_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>STB_EXPORT_DAT</source>
         <translation>Export to DAT file</translation>
@@ -3072,6 +3259,10 @@ Use Display Entity menu command to show them.
         <source>STB_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>STB_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>STB_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -3104,6 +3295,10 @@ Use Display Entity menu command to show them.
         <source>STB_LENGTH_2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>STB_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>STB_MAP</source>
         <translation>Pattern mapping</translation>
@@ -3200,6 +3395,10 @@ Use Display Entity menu command to show them.
         <source>STB_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>STB_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>STB_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -3224,6 +3423,10 @@ Use Display Entity menu command to show them.
         <source>STB_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>STB_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>STB_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -3276,6 +3479,10 @@ Use Display Entity menu command to show them.
         <source>STB_SHOW_DISTRIBUTION</source>
         <translation>Show Distribution</translation>
     </message>
+    <message>
+        <source>STB_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar bar</translation>
+    </message>
     <message>
         <source>STB_REVOLUTION</source>
         <translation>Revolution</translation>
@@ -3348,6 +3555,10 @@ Use Display Entity menu command to show them.
         <source>STB_SCALE</source>
         <translation>Scale Transform</translation>
     </message>
+    <message>
+        <source>STB_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
     <message>
         <source>STB_DUPLICATE_NODES</source>
         <translation>Duplicate Nodes or/and Elements</translation>
@@ -3386,7 +3597,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>STB_UNDERLYING_ELEMS</source>
-        <translation>Create groups of entities from existing groups of superior dimensions</translation>
+        <translation>Create groups of entities basing on nodes of other groups</translation>
     </message>
     <message>
         <source>STB_UPDATE</source>
@@ -3532,6 +3743,10 @@ Use Display Entity menu command to show them.
         <source>TOP_COMPUTE</source>
         <translation>Compute</translation>
     </message>
+    <message>
+        <source>TOP_COMPUTE_SUBMESH</source>
+        <translation>Compute Sub-mesh</translation>
+    </message>
     <message>
         <source>TOP_PRECOMPUTE</source>
         <translation>Preview</translation>
@@ -3562,7 +3777,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>TOP_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>TOP_CREATE_GROUP</source>
@@ -3664,6 +3879,14 @@ Use Display Entity menu command to show them.
         <source>TOP_EDIT_MESHSUBMESH</source>
         <translation>Edit Mesh/Sub-mesh</translation>
     </message>
+    <message>
+        <source>TOP_EDIT_MESH</source>
+        <translation>Edit Mesh</translation>
+    </message>
+    <message>
+        <source>TOP_EDIT_SUBMESH</source>
+        <translation>Edit Sub-mesh</translation>
+    </message>
     <message>
         <source>TOP_EXPORT_DAT</source>
         <translation>Export to DAT file</translation>
@@ -3724,6 +3947,10 @@ Use Display Entity menu command to show them.
         <source>TOP_FREE_NODE</source>
         <translation>Free Nodes</translation>
     </message>
+    <message>
+        <source>TOP_NODE_CONNECTIVITY_NB</source>
+        <translation>Node connectivity number</translation>
+    </message>
     <message>
         <source>TOP_FREE_FACES</source>
         <translation>Free Faces</translation>
@@ -3756,6 +3983,10 @@ Use Display Entity menu command to show them.
         <source>TOP_LENGTH_2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>TOP_DEFLECTION_2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>TOP_MAP</source>
         <translation>Pattern mapping</translation>
@@ -3852,6 +4083,10 @@ Use Display Entity menu command to show them.
         <source>TOP_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>TOP_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>TOP_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -3876,6 +4111,10 @@ Use Display Entity menu command to show them.
         <source>TOP_QUADRATIC_PENTAHEDRON</source>
         <translation>Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>TOP_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>TOP_QUADRATIC_PYRAMID</source>
         <translation>Quadratic Pyramid</translation>
@@ -4000,6 +4239,10 @@ Use Display Entity menu command to show them.
         <source>TOP_SCALE</source>
         <translation>Scale Transform</translation>
     </message>
+    <message>
+        <source>TOP_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
     <message>
         <source>TOP_DUPLICATE_NODES</source>
         <translation>Duplicate Nodes or/and Elements</translation>
@@ -4038,7 +4281,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>TOP_UNDERLYING_ELEMS</source>
-        <translation>Create groups of entities from existing groups of superior dimensions</translation>
+        <translation>Create groups of entities basing on nodes of other groups</translation>
     </message>
     <message>
         <source>TOP_UPDATE</source>
@@ -4082,7 +4325,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>MEN_FILE_INFO</source>
-        <translation>MED File Information</translation>
+        <translation>File Information</translation>
     </message>
     <message>
         <source>SMESH_WRN_NO_APPROPRIATE_SELECTION</source>
@@ -4219,20 +4462,102 @@ It can&apos;t be deleted </translation>
         <source>STB_SORT_CHILD_ITEMS</source>
         <translation>Sort child items</translation>
     </message>
+    <message>
+        <source>SMESH_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_ALGO_GROUP_BASIC</source>
+        <translation>Basic</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_BASIC</source>
+        <translation>Basic</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_PROGRESSION</source>
+        <translation>Progression</translation>
+    </message>
+    <message>
+        <source>SMESH_1D_HYP_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_REGULAR</source>
+        <translation>Regular faces</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_FREE</source>
+        <translation>Free faces</translation>
+    </message>
+    <message>
+        <source>SMESH_2D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_REGULAR</source>
+        <translation>Regular volumes</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_FREE</source>
+        <translation>Free volumes</translation>
+    </message>
+    <message>
+        <source>SMESH_3D_ALGO_GROUP_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_FieldSelectorWdg</name>
+    <message>
+        <source>FIELDS_TO_EXPORT</source>
+        <translation>Export Fields</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_OffsetDlg</name>
+    <message>
+        <source>SMESH_OFFSET_TITLE</source>
+        <translation>Offset</translation>
+    </message>
+    <message>
+        <source>SMESH_OFFSET</source>
+        <translation>Offset</translation>
+    </message>
+    <message>
+        <source>OFFSET_VALUE</source>
+        <translation>Offset Value</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_AddMeshElementDlg</name>
+    <message>
+        <source>NB_ADDED</source>
+        <translation>%1 elements have been added since 0D
+elements already present on the selected nodes.</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Dialog</name>
     <message>
         <source>DLG_MESH</source>
-        <translation>meshes</translation>
+        <translation>mesh(s)</translation>
     </message>
     <message>
         <source>DLG_HYPO</source>
-        <translation>hypotheses</translation>
+        <translation>hypothesis(s)</translation>
     </message>
     <message>
         <source>DLG_ALGO</source>
-        <translation>algorithms</translation>
+        <translation>algorithm(s)</translation>
+    </message>
+    <message>
+        <source>DLG_GEOM</source>
+        <translation>object(s)</translation>
     </message>
 </context>
 <context>
@@ -4246,6 +4571,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_AUTO_GROUPS</source>
         <translation>Automatically create groups for MED export</translation>
     </message>
+    <message>
+        <source>PREF_SHOW_WARN</source>
+        <translation>Show warning when exporting group</translation>
+    </message>
     <message>
         <source>PREF_GROUP_SEGMENT_LENGTH</source>
         <translation>Automatic parameters</translation>
@@ -4305,7 +4634,7 @@ Please, create VTK viewer and try again</translation>
     <message>
         <source>PREF_PRE_SELECTION</source>
         <translation>Pre-selection color</translation>
-    </message>    
+    </message>
     <message>
         <source>PREF_COLOR</source>
         <translation>Color</translation>
@@ -4327,17 +4656,25 @@ Please, create VTK viewer and try again</translation>
         <translation>Display entity</translation>
     </message>
     <message>
-        <source>QUADRATIC_REPRESENT_MODE</source>
+        <source>QUADRATIC_REPRESENT_MODE_GROUP</source>
         <translation>Representation of the 2D quadratic elements</translation>
     </message>
+    <message>
+        <source>QUADRATIC_REPRESENT_MODE</source>
+        <translation>Default mode of the 2D quadratic elements</translation>
+    </message>
     <message>
         <source>MAX_ARC_ANGLE</source>
         <translation>Maximum angle</translation>
     </message>
     <message>
-        <source>PREF_DISPLAY_MODE</source>
+        <source>PREF_DISPLAY_MODE_GROUP</source>
         <translation>Display mode</translation>
     </message>
+    <message>
+        <source>PREF_DISPLAY_MODE</source>
+        <translation>Default display mode</translation>
+    </message>
     <message>
         <source>PREF_ELEMENTS</source>
         <translation>Elements</translation>
@@ -4490,6 +4827,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_OBJECTS</source>
         <translation>Objects</translation>
     </message>
+    <message>
+        <source>PREF_SELECTION_INCREMENT</source>
+        <translation>Elements width increment</translation>
+    </message>
     <message>
         <source>PREF_OBJECT_COLOR</source>
         <translation>Object color</translation>
@@ -4548,7 +4889,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_COLOR_0D</source>
-        <translation>0D elements</translation>
+        <translation>0D element color</translation>
     </message>
     <message>
         <source>PREF_SIZE_0D</source>
@@ -4556,12 +4897,20 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_BALL_COLOR</source>
-        <translation>Balls</translation>
+        <translation>Ball color</translation>
+    </message>
+    <message>
+        <source>PREF_BALL_DIAMETER</source>
+        <translation>Default diameter of ball elements</translation>
     </message>
     <message>
         <source>PREF_BALL_SIZE</source>
         <translation>Size of ball elements</translation>
     </message>
+    <message>
+        <source>PREF_BALL_SCALE</source>
+        <translation>Scale factor of ball elements</translation>
+    </message>
     <message>
         <source>PREF_WIDTH</source>
         <translation>Line width</translation>
@@ -4581,6 +4930,10 @@ Please, create VTK viewer and try again</translation>
         <source>ALLOW_ELEM_LIST_MODIF</source>
         <translation>Enable manual edition</translation>
     </message>
+    <message>
+        <source>SELECT_ALL</source>
+        <translation>Select All</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Add0DElemsOnAllNodesDlg</name>
@@ -4622,6 +4975,10 @@ Please, create VTK viewer and try again</translation>
         <source>SMESH_ADD_QUADRATIC_PENTAHEDRON</source>
         <translation>Add Quadratic Pentahedron</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_BIQUADRATIC_PENTAHEDRON</source>
+        <translation>Add BiQuadratic Pentahedron</translation>
+    </message>
     <message>
         <source>SMESH_ADD_QUADRATIC_PYRAMID</source>
         <translation>Add Quadratic Pyramid</translation>
@@ -4683,7 +5040,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>CREATE_COMMON_GROUPS</source>
-        <translation>Create common groups for initial meshes</translation>
+        <translation>Create groups from input objects</translation>
     </message>
     <message>
         <source>MERGE_NODES_AND_ELEMENTS</source>
@@ -4691,7 +5048,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>MESHES</source>
-        <translation>Meshes</translation>
+        <translation>Meshes, sub-meshes, groups</translation>
     </message>
     <message>
         <source>PROCESSING_IDENTICAL_GROUPS</source>
@@ -4802,9 +5159,7 @@ Please, create VTK viewer and try again</translation>
     <name>SMESHGUI_PrecomputeOp</name>
     <message>
         <source>CLEAR_SUBMESH_QUESTION</source>
-        <translation>Temporary submeshes on the selected geometry
-were created during preview operation.
-Do you want to remove all these submeshes?</translation>
+        <translation>Do you want to remove mesh entities generated during preview operation?</translation>
     </message>
     <message>
         <source>SMESH_WRN_NOTHING_PREVIEW</source>
@@ -4812,8 +5167,35 @@ Do you want to remove all these submeshes?</translation>
     </message>
     <message>
         <source>SMESH_REJECT_MESH_ORDER</source>
-        <translation>The submesh priority changed during preview operation.
-Do you want to restore original submesh priority?</translation>
+        <translation>The sub-mesh priority changed during preview operation.
+Do you want to restore original sub-mesh priority?</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_SplitBiQuadDlg</name>
+    <message>
+        <source>CAPTION</source>
+        <translation>Split bi-quadratic into linear</translation>
+    </message>
+    <message>
+        <source>MESH</source>
+        <translation>Mesh, Group or Sub-mesh</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_SplitBiQuadOp</name>
+    <message>
+        <source>MESH_IS_NOT_SELECTED</source>
+        <translation>No object to split is selected.
+Please specify it and try again</translation>
+    </message>
+    <message>
+        <source>REF_IS_NULL</source>
+        <translation>No valid mesh object selected</translation>
+    </message>
+    <message>
+        <source>DIFFERENT_MESHES</source>
+        <translation>Selected objects belong to different meshes</translation>
     </message>
 </context>
 <context>
@@ -4838,11 +5220,11 @@ Do you want to restore original submesh priority?</translation>
         <source>RADIOBTN_2</source>
         <translation>Convert to quadratic</translation>
     </message>
-      <message>
+    <message>
         <source>RADIOBTN_3</source>
         <translation>Convert to bi-quadratic</translation>
-      </message>
-      <message>
+    </message>
+    <message>
         <source>NON_CONFORM_WARNING</source>
         <translation>Warning: mesh can become non-conformal</translation>
     </message>
@@ -4909,7 +5291,7 @@ Please verify validity of entered information</translation>
     </message>
     <message>
         <source>MESH_OR_SUBMESH</source>
-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>
     </message>
     <message>
         <source>PATTERN</source>
@@ -4997,8 +5379,12 @@ Please select a group and try again</translation>
         <translation>Detect</translation>
     </message>
     <message>
-        <source>EDIT_SELECTED_GROUP</source>
-        <translation>Edit selected group</translation>
+        <source>EDIT_SELECTED_NODE_GROUP</source>
+        <translation>Edit selected group of coincident nodes</translation>
+    </message>
+    <message>
+        <source>EDIT_SELECTED_ELEM_GROUP</source>
+        <translation>Edit selected group of coincident elements</translation>
     </message>
     <message>
         <source>SELECT_ALL</source>
@@ -5014,7 +5400,27 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>EXCLUDE_GROUPS</source>
-        <translation>Exclude Groups</translation>
+        <translation>Exclude groups from detection</translation>
+    </message>
+    <message>
+        <source>SEPARATE_CORNERS_AND_MEDIUM</source>
+        <translation>No merge of corner and medium nodes of quadratic cells</translation>
+    </message>
+    <message>
+        <source>AVOID_MAKING_HOLES</source>
+        <translation>Avoid making holes</translation>
+    </message>
+    <message>
+        <source>KEEP_NODES</source>
+        <translation>Nodes to keep during the merge</translation>
+    </message>
+    <message>
+        <source>GROUP_SUBMESH</source>
+        <translation>Groups and sub-meshes</translation>
+    </message>
+    <message>
+        <source>SELECT</source>
+        <translation>Select: </translation>
     </message>
 </context>
 <context>
@@ -5073,7 +5479,7 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_PATH_MESH</source>
-        <translation>Mesh or submesh</translation>
+        <translation>Mesh or sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_PATH_SHAPE</source>
@@ -5114,6 +5520,26 @@ Please select a group and try again</translation>
         <source>EXTRUSION_ALONG_LINE</source>
         <translation>Extrusion along a line</translation>
     </message>
+    <message>
+        <source>BY_AVERAGE_NORMAL</source>
+        <translation>Along average normal</translation>
+    </message>
+    <message>
+        <source>USE_INPUT_ELEMS_ONLY</source>
+        <translation>Use only input elements</translation>
+    </message>
+    <message>
+        <source>SMESH_SCALES</source>
+        <translation>Scale Factors</translation>
+    </message>
+    <message>
+        <source>LINEAR_SCALES</source>
+        <translation>Linear Variation of Scale Factors</translation>
+    </message>
+    <message>
+        <source>BASE_POINT</source>
+        <translation>Scaling Center</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FilterDlg</name>
@@ -5124,7 +5550,7 @@ Please select valid object and try again</translation>
     </message>
     <message>
         <source>CURRENT_DIALOG</source>
-        <translation>Current Group</translation>
+        <translation>Current Dialog</translation>
     </message>
     <message>
         <source>EDGES_TLT</source>
@@ -5160,7 +5586,7 @@ Please select valid object and try again</translation>
     </message>
     <message>
         <source>SHAPE_IS_NOT_A_CYLINDER</source>
-        <translation>&quot;%1&quot; is not a cylinderical face
+        <translation>&quot;%1&quot; is not a cylindrical face
 Please select a cylindrical face and try again</translation>
     </message>
     <message>
@@ -5378,6 +5804,10 @@ Please check input data and try again</translation>
         <source>OVER_CONSTRAINED_FACE</source>
         <translation>Over-constrained faces</translation>
     </message>
+    <message>
+        <source>BELONG_TO_MESH_GROUP</source>
+        <translation>Belong to Mesh Group</translation>
+    </message>
     <message>
         <source>BELONG_TO_CYLINDER</source>
         <translation>Belong to Cylinder</translation>
@@ -5414,10 +5844,14 @@ Please check input data and try again</translation>
         <source>CONNECTED_ELEMS</source>
         <translation>Elements of a domain</translation>
     </message>
-  <message>
-    <source>NUMBEROFNODESINELEMENT</source>
-    <translation>Number Of Nodes In Element</translation>
-  </message>
+    <message>
+        <source>NODE_CONN_NUMBER</source>
+        <translation>Connectivity number</translation>
+    </message>
+    <message>
+        <source>NUMBEROFNODESINELEMENT</source>
+        <translation>Number Of Nodes In Element</translation>
+    </message>
     <message>
         <source>COPY_FROM</source>
         <translation>Copy from...</translation>
@@ -5487,6 +5921,10 @@ Please enter correct value and try again</translation>
         <source>LENGTH2D</source>
         <translation>Length 2D</translation>
     </message>
+    <message>
+        <source>DEFLECTION2D</source>
+        <translation>Deflection 2D</translation>
+    </message>
     <message>
         <source>LESS_THAN</source>
         <translation>Less than</translation>
@@ -5583,7 +6021,7 @@ Please enter correct value and try again</translation>
     </message>
     <message>
         <source>ELEMENTS</source>
-        <translation>Elements</translation>
+        <translation>All</translation>
     </message>
     <message>
         <source>ENTITY_TYPE</source>
@@ -5675,18 +6113,22 @@ Please enter correct value and try again</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_21</source>
-        <translation>OCTA12</translation>
+        <translation>PENTA18</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_22</source>
-        <translation>POLYEDRE</translation>
+        <translation>OCTA12</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_23</source>
-        <translation>QPOLYEDRE</translation>
+        <translation>POLYEDRE</translation>
     </message>
     <message>
         <source>ENTITY_TYPE_24</source>
+        <translation>QPOLYEDRE</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_25</source>
         <translation>BALL</translation>
     </message>
     <message>
@@ -5771,8 +6213,8 @@ Please specify non-empty name and try again</translation>
 Please specify them and try again</translation>
     </message>
     <message>
-        <source>NAME</source>
-        <translation>Name</translation>
+        <source>RESULT</source>
+        <translation>Result</translation>
     </message>
     <message>
         <source>OBJECT_1</source>
@@ -5784,7 +6226,7 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>RESULT_NAME</source>
-        <translation>Result name</translation>
+        <translation>Group name</translation>
     </message>
     <message>
         <source>TOOL_OBJECT</source>
@@ -5795,13 +6237,6 @@ Please specify them and try again</translation>
         <translation>Union of two groups</translation>
     </message>
 </context>
-<context>
-    <name>SMESHGUI_GroupDlg</name>
-    <message>
-        <source>SELECT_ALL</source>
-        <translation>Select All</translation>
-    </message>
-</context>
 <context>
     <name>SMESHGUI_UnionGroupsDlg</name>
     <message>
@@ -5813,27 +6248,35 @@ Please specify them and try again</translation>
     <name>SMESHGUI_DimGroupDlg</name>
     <message>
         <source>CREATE_GROUP_OF_UNDERLYING_ELEMS</source>
-        <translation>Create group of underlying entities</translation>
+        <translation>Group based on nodes of other groups</translation>
     </message>
     <message>
         <source>ELEMENTS_TYPE</source>
         <translation>Elements type</translation>
     </message>
     <message>
-        <source>NODE</source>
-        <translation>Node</translation>
+        <source>UNDERLYING_ENTITIES_ONLY</source>
+        <translation>Include underlying entities only</translation>
     </message>
     <message>
-        <source>EDGE</source>
-        <translation>Edge</translation>
+        <source>NUMBER_OF_COMMON_NODES</source>
+        <translation>Number of common nodes</translation>
     </message>
     <message>
-        <source>FACE</source>
-        <translation>Face</translation>
+        <source>ALL</source>
+        <translation>All</translation>
     </message>
     <message>
-        <source>VOLUME</source>
-        <translation>Volume</translation>
+        <source>MAIN</source>
+        <translation>Main</translation>
+    </message>
+    <message>
+        <source>AT_LEAST_ONE</source>
+        <translation>At least one</translation>
+    </message>
+    <message>
+        <source>MAJORITY</source>
+        <translation>Majority</translation>
     </message>
 </context>
 <context>
@@ -5962,8 +6405,12 @@ Please specify them and try again</translation>
         <translation>3D</translation>
     </message>
     <message>
-        <source>EDIT_MESH_SUBMESH</source>
-        <translation>Edit mesh/sub-mesh</translation>
+        <source>EDIT_MESH</source>
+        <translation>Edit mesh</translation>
+    </message>
+    <message>
+        <source>EDIT_SUBMESH</source>
+        <translation>Edit sub-mesh</translation>
     </message>
     <message>
         <source>GEOMETRY</source>
@@ -5977,6 +6424,10 @@ Please specify them and try again</translation>
         <source>MESH</source>
         <translation>Mesh</translation>
     </message>
+    <message>
+        <source>MESH_TYPE</source>
+        <translation>Mesh type</translation>
+    </message>
     <message>
         <source>NAME</source>
         <translation>Name</translation>
@@ -5990,16 +6441,22 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>EDIT_SUBMESH_QUESTION</source>
-        <translation>A submesh on the selected geometry already exists.
- Do you want to edit this submesh?</translation>
+        <translation>A sub-mesh on the selected geometry already exists.
+ Do you want to edit this sub-mesh?</translation>
     </message>
     <message>
         <source>SUBMESH_NOT_ALLOWED</source>
-        <translation>No sense in creating a submesh ignored by global algorithm &quot;%1&quot;</translation>
+        <translation>No sense in creating a sub-mesh ignored by global algorithm &quot;%1&quot;</translation>
+    </message>
+    <message>
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
+        <translation>Geometry object is not defined.
+Do you want to create an empty mesh 
+without algorithms and hypotheses? </translation>
     </message>
     <message>
-        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED</source>
-        <translation>Geometry object is not defined
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_SUBMESH</source>
+        <translation>Geometry object is not defined.
 Please specify it and try again</translation>
     </message>
     <message>
@@ -6031,6 +6488,26 @@ Please specify it and try again</translation>
         <source>MESH_IS_NULL</source>
         <translation>Mesh is null</translation>
     </message>
+    <message>
+        <source>MT_ANY</source>
+        <translation>Any</translation>
+    </message>
+    <message>
+        <source>MT_HEXAHEDRAL</source>
+        <translation>Hexahedral</translation>
+    </message>
+    <message>
+        <source>MT_TETRAHEDRAL</source>
+        <translation>Tetrahedral</translation>
+    </message>
+    <message>
+        <source>MT_TRIANGULAR</source>
+        <translation>Triangular</translation>
+    </message>
+    <message>
+        <source>MT_QUADRILATERAL</source>
+        <translation>Quadrilateral</translation>
+    </message>
     <message>
         <source>NAME_OF_MESH_IS_EMPTY</source>
         <translation>Name of mesh is empty
@@ -6038,7 +6515,7 @@ Please enter valid name and try again</translation>
     </message>
     <message>
         <source>NAME_OF_SUBMESH_IS_EMPTY</source>
-        <translation>Name of submesh is empty
+        <translation>Name of sub-mesh is empty
 Please enter valid name and try again</translation>
     </message>
     <message>
@@ -6046,6 +6523,14 @@ Please enter valid name and try again</translation>
         <translation>There is no object for editing. Please
 select mesh or sub-mesh and try again</translation>
     </message>
+    <message>
+        <source>CONCURRENT_SUBMESH_APPEARS</source>
+        <translation> 
+The assigned algorithm has the same priority as one assigned to an 
+adjacent sub-mesh, hence it&apos;s undefined which algorithm to use for
+meshing boundary shared by two sub-meshes. Would you like to set
+the order of sub-mesh computation? </translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshPatternDlg</name>
@@ -6208,6 +6693,14 @@ It is impossible to read point coordinates from file</translation>
         <source>NONE</source>
         <translation>&lt;None&gt;</translation>
     </message>
+    <message>
+        <source>DEFAULT</source>
+        <translation>&lt;Default&gt;</translation>
+    </message>
+    <message>
+        <source>SELECT</source>
+        <translation>&lt;Select&gt;</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MultiEditDlg</name>
@@ -6253,10 +6746,10 @@ It is impossible to read point coordinates from file</translation>
     </message>
 </context>
 <context>
-    <name>SMESHGUI_CuttingIntoTetraDlg</name>
+    <name>SMESHGUI_SplitVolumesDlg</name>
     <message>
         <source>CAPTION</source>
-        <translation>Splitting volumes into tetrahedra</translation>
+        <translation>Splitting volumes</translation>
     </message>
     <message>
         <source>SPLIT_METHOD</source>
@@ -6274,6 +6767,34 @@ It is impossible to read point coordinates from file</translation>
         <source>SPLIT_HEX_TO_24_TETRA</source>
         <translation>Into 24 tetrahedra</translation>
     </message>
+    <message>
+        <source>SPLIT_HEX_TO_2_PRISMS</source>
+        <translation>Into 2 prisms</translation>
+    </message>
+    <message>
+        <source>SPLIT_HEX_TO_4_PRISMS</source>
+        <translation>Into 4 Prisms</translation>
+    </message>
+    <message>
+        <source>TARGET_ELEM_TYPE</source>
+        <translation>Target element type</translation>
+    </message>
+    <message>
+        <source>FACET_TO_SPLIT</source>
+        <translation>Facet to split</translation>
+    </message>
+    <message>
+        <source>START_POINT</source>
+        <translation>Hexa location</translation>
+    </message>
+    <message>
+        <source>FACET_NORMAL</source>
+        <translation>Facet normal</translation>
+    </message>
+    <message>
+        <source>ALL_DOMAINS</source>
+        <translation>All domains</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_PrecisionDlg</name>
@@ -6301,8 +6822,8 @@ It is impossible to read point coordinates from file</translation>
         <translation>Preview</translation>
     </message>
     <message>
-        <source>REVOLUTION_1D</source>
-        <translation>Revolution of 1D elements</translation>
+        <source>REVOLUTION</source>
+        <translation>Revolution</translation>
     </message>
     <message>
         <source>REVOLUTION_2D</source>
@@ -6435,6 +6956,42 @@ It is impossible to read point coordinates from file</translation>
         <source>SIDE_2</source>
         <translation>Side 2</translation>
     </message>
+    <message>
+        <source>AUTO_SEWING</source>
+        <translation>Auto Sewing</translation>
+    </message>
+    <message>
+        <source>COINCIDENT_FREE_BORDERS</source>
+        <translation>Coincident Free Borders</translation>
+    </message>
+    <message>
+        <source>DETECT</source>
+        <translation>Detect</translation>
+    </message>
+    <message>
+        <source>SELECT_ALL</source>
+        <translation>Select all</translation>
+    </message>
+    <message>
+        <source>EDIT_SELECTED_GROUP</source>
+        <translation>Edit Selected Group</translation>
+    </message>
+    <message>
+        <source>STEP</source>
+        <translation>Step</translation>
+    </message>
+    <message>
+        <source>NO_BORDERS_TO_SEW</source>
+        <translation>No free borders to sew found</translation>
+    </message>
+    <message>
+        <source>NOT_ALL_BORDERS_SEWED</source>
+        <translation>%1 of %2 groups of borders sewed</translation>
+    </message>
+    <message>
+        <source>ALL_BORDERS_SEWED</source>
+        <translation>%1 group(s) of borders sewed</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_ShapeByMeshDlg</name>
@@ -6531,19 +7088,27 @@ It is impossible to read point coordinates from file</translation>
         <source>SMESH_CREATE_GROUP_FROM_GEOM</source>
         <translation>Create Groups from Geometry</translation>
     </message>
+    <message>
+        <source>ELEMENTS</source>
+        <translation>Elements</translation>
+    </message>
+    <message>
+        <source>ELEMENTS_TOOLTIP</source>
+        <translation>No 0D elements</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOrderDlg</name>
     <message>
         <source>SMESH_MESHORDER_TITLE</source>
-        <translation>Order of submesh in meshing process</translation>
+        <translation>Order of sub-mesh in meshing process</translation>
     </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOrderOp</name>
     <message>
         <source>SMESH_NO_CONCURENT_MESH</source>
-        <translation>No concurent submeshes detected</translation>
+        <translation>No concurrent sub-meshes detected</translation>
     </message>
 </context>
 <context>
@@ -6667,6 +7232,10 @@ It is impossible to read point coordinates from file</translation>
         <source>DUPLICATION_ONLY_ELEMS</source>
         <translation>Duplicate elements only</translation>
     </message>
+    <message>
+        <source>DUPLICATION_GROUP_BOUNDARY</source>
+        <translation>Duplicate nodes on group boundaries</translation>
+    </message>
     <message>
         <source>GROUP_ELEMS_TO_DUPLICATE</source>
         <translation>Group of elements to duplicate</translation>
@@ -6679,6 +7248,10 @@ It is impossible to read point coordinates from file</translation>
         <source>GROUP_ELEMS_TO_REPLACE</source>
         <translation>Group of elements to replace nodes with new ones</translation>
     </message>
+    <message>
+        <source>GROUP_VOLUME_GROUPS</source>
+        <translation>Groups (faces or volumes)</translation>
+    </message>
     <message>
         <source>CONSTRUCT_NEW_GROUP_NODES</source>
         <translation>Construct group with newly created nodes</translation>
@@ -6687,6 +7260,18 @@ It is impossible to read point coordinates from file</translation>
         <source>CONSTRUCT_NEW_GROUP_ELEMENTS</source>
         <translation>Construct group with newly created elements</translation>
     </message>
+    <message>
+        <source>CREATE_JOINT_ELEMENTS</source>
+        <translation>Create joint elements</translation>
+    </message>
+    <message>
+        <source>ON_ALL_BOUNDARIES</source>
+        <translation>On all boundaries</translation>
+    </message>
+    <message>
+        <source>GENERATE_GROUPS</source>
+        <translation>Generate</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Make2DFrom3DDlg</name>
@@ -6761,7 +7346,7 @@ as they are of improper type:
     </message>
     <message>
         <source>SMESH_NOT_ONLY_GROUPS</source>
-        <translation>Can't process meshes and groups at once</translation>
+        <translation>Can&apos;t process meshes and groups at once</translation>
     </message>
     <message>
         <source>SMESH_ERR_NO_3D_ELEMENTS</source>
@@ -6814,6 +7399,10 @@ as they are of improper type:
         <source>QUADRATIC_LAB</source>
         <translation>Quadratic</translation>
     </message>
+    <message>
+        <source>BI_QUADRATIC_LAB</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
     <message>
         <source>0D_LAB</source>
         <translation>0D:</translation>
@@ -6941,6 +7530,10 @@ as they are of improper type:
         <source>ELEM_MODE</source>
         <translation>Element</translation>
     </message>
+    <message>
+        <source>SHOW_IDS</source>
+        <translation>Show IDs</translation>
+    </message>
     <message>
         <source>BUT_DUMP_MESH</source>
         <translation>&amp;Dump</translation>
@@ -6976,6 +7569,10 @@ as they are of improper type:
         <source>GRAVITY_CENTER</source>
         <translation>Gravity Center</translation>
     </message>
+    <message>
+        <source>NORMAL_VECTOR</source>
+        <translation>Normal</translation>
+    </message>
     <message>
         <source>NODE</source>
         <translation>Node</translation>
@@ -7124,8 +7721,8 @@ as they are of improper type:
 <context>
     <name>SMESHGUI_TreeElemInfo</name>
     <message>
-      <source>SHOW_ITEM_INFO</source>
-      <translation>Show info</translation>
+        <source>SHOW_ITEM_INFO</source>
+        <translation>Show info</translation>
     </message>
     <message>
         <source>PROPERTY</source>
@@ -7325,6 +7922,10 @@ as they are of improper type:
         <source>NUMBER_OF_THE_FREE_NODES</source>
         <translation>Number of the free nodes</translation>
     </message>
+    <message>
+        <source>MAX_NODE_CONNECTIVITY</source>
+        <translation>Max. number of connected elements</translation>
+    </message>
     <message>
         <source>DOUBLE_NODES_TOLERANCE</source>
         <translation>Double nodes tolerance</translation>
@@ -7348,7 +7949,7 @@ as they are of improper type:
     <message>
         <source>NUMBER_OF_THE_DOUBLE_FACES</source>
         <translation>Number of the double faces</translation>
-    </message>   
+    </message>
     <message>
         <source>ASPECT_RATIO_HISTOGRAM</source>
         <translation>Aspect Ratio histogram</translation>
@@ -7546,7 +8147,7 @@ as they are of improper type:
     <name>SMESHGUI_ReorientFacesDlg</name>
     <message>
         <source>CAPTION</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>REORIENT_FACES</source>
@@ -7576,6 +8177,14 @@ as they are of improper type:
         <source>ORIENTATION</source>
         <translation>Orientation</translation>
     </message>
+    <message>
+        <source>VOLUMES</source>
+        <translation>Volumes</translation>
+    </message>
+    <message>
+        <source>OUTSIDE_VOLUME_NORMAL</source>
+        <translation>Face normal outside volume</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_ReorientFacesOp</name>
@@ -7583,10 +8192,18 @@ as they are of improper type:
         <source>NO_OBJECT_SELECTED</source>
         <translation>No object selected</translation>
     </message>
+    <message>
+        <source>NO_VOLUME_OBJECT_SELECTED</source>
+        <translation>No volume object selected</translation>
+    </message>
     <message>
         <source>NO_FACES</source>
         <translation>Object includes no faces</translation>
     </message>
+    <message>
+        <source>NO_VOLUMES</source>
+        <translation>Volume object includes no volumes</translation>
+    </message>
     <message>
         <source>ZERO_SIZE_VECTOR</source>
         <translation>Zero size vector</translation>
@@ -7667,7 +8284,7 @@ as they are of improper type:
         <translation>Size:</translation>
     </message>
     <message>
-        <source>ORIENTATION_SCALE</source>
+        <source>SCALE_FACTOR</source>
         <translation>Scale:</translation>
     </message>
     <message>
@@ -7679,4 +8296,30 @@ as they are of improper type:
         <translation>Shrink coef:</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_DisplayEntitiesDlg</name>
+    <message>
+        <source>WRN_AT_LEAST_ONE</source>
+        <translation>At least one entity type should be chosen!</translation>
+    </message>
+</context>
+<context>
+    <name>SMESH_AdvOptionsWdg</name>
+    <message>
+        <source>ADD_OPTION_BTN</source>
+        <translation>Add option</translation>
+    </message>
+    <message>
+        <source>CHOICE</source>
+        <translation>Choice</translation>
+    </message>
+    <message>
+        <source>OPTION_NAME</source>
+        <translation>Option name</translation>
+    </message>
+    <message>
+        <source>OPTION_VALUE</source>
+        <translation>Option value</translation>
+    </message>
+</context>
 </TS>