0022362: EDF SMESH: Quadrangle (mapping) algorithm: enforced vortices

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index 5d43fc78ac5bb2b5ccad02a69e2e5f80c4afab0f..4f87f5cf5528ea2564959a42982dce4d46583b04 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -75,18 +75,6 @@
         <source>ASPECTRATIO_ELEMENTS</source>
         <translation>Aspect Ratio</translation>
     </message>
-    <message>
-        <source>NODE_POSITION</source>
-        <translation>Position</translation>
-    </message>
-    <message>
-        <source>U_POSITION</source>
-        <translation>U</translation>
-    </message>
-    <message>
-        <source>V_POSITION</source>
-        <translation>V</translation>
-    </message>
     <message>
         <source>COL_ALGO_HEADER</source>
         <translation>Algorithm</translation>
@@ -135,6 +123,10 @@
         <source>COMPERR_STD_EXCEPTION</source>
         <translation>std::exception</translation>
     </message>
+    <message>
+        <source>COMPERR_WARNING</source>
+        <translation>Warning</translation>
+    </message>
     <message>
         <source>COMPERR_UNKNOWN</source>
         <translation>Unknown error</translation>
@@ -147,6 +139,10 @@
         <source>COMPERR_NO_MESH_ON_SHAPE</source>
         <translation>No mesh elements assigned to a Sub-shape</translation>
     </message>
+    <message>
+        <source>COMPERR_BAD_PARMETERS</source>
+        <translation>Invalid input parameters</translation>
+    </message>
     <message>
         <source>EDITERR_NO_MEDIUM_ON_GEOM</source>
         <translation>Some medium nodes not placed on geometry to avoid
@@ -720,6 +716,46 @@
         <source>TOP_MEASURE_BND_BOX</source>
         <translation>Bounding box</translation>
     </message>
+    <message>
+        <source>MEN_BASIC_PROPERTIES</source>
+        <translation>Basic Properties</translation>
+    </message>
+    <message>
+        <source>MEN_MEASURE_LENGTH</source>
+        <translation>Length</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_LENGTH</source>
+        <translation>Calculate sum of length of all 1D elements of the selected object(s)</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_LENGTH</source>
+        <translation>Length</translation>
+    </message>
+    <message>
+        <source>MEN_MEASURE_AREA</source>
+        <translation>Area</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_AREA</source>
+        <translation>Calculate sum of area of all 2D elements of the selected object(s)</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_AREA</source>
+        <translation>Area</translation>
+    </message>
+     <message>
+        <source>MEN_MEASURE_VOLUME</source>
+        <translation>Volume</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_VOLUME</source>
+        <translation>Calculate sum of volume of all 3D elements of the selected object(s)</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_VOLUME</source>
+        <translation>Volume</translation>
+    </message>
     <message>
         <source>MEN_MOVE</source>
         <translation>Move Node</translation>
@@ -836,6 +872,10 @@
         <source>MEN_RESET</source>
         <translation>Reset</translation>
     </message>
+    <message>
+        <source>MEN_OVERALL_MESH_QUALITY</source>
+        <translation>Overall Mesh Quality</translation>
+    </message>
     <message>
         <source>MEN_DISTRIBUTION_CTRL</source>
         <translation>Distribution</translation>
@@ -954,7 +994,7 @@
     </message>
     <message>
         <source>MEN_DUPLICATE_NODES</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes or/and Elements</translation>
     </message>
     <message>
         <source>MEN_TRANSF</source>
@@ -1026,15 +1066,15 @@
     </message>
     <message>
         <source>MEN_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>TOP_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>STB_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>MESHERS_FILE_CANT_OPEN</source>
@@ -1237,6 +1277,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_QUADRATIC_TRIANGLE_TITLE</source>
         <translation>Add Quadratic Triangle</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_BIQUADRATIC_TRIANGLE_TITLE</source>
+        <translation>Add BiQuadratic Triangle</translation>
+    </message>
     <message>
         <source>SMESH_ADD_SUBMESH</source>
         <translation>SubMesh Construction</translation>
@@ -1273,6 +1317,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_AUTO_GROUPS</source>
         <translation>Automatically create groups</translation>
     </message>
+    <message>
+        <source>SMESH_AUTO_DIM</source>
+        <translation>Automatically define space dimension</translation>
+    </message>
     <message>
         <source>SMESH_REQUIRED_GROUPS</source>
         <translation>Create groups of required entities</translation>
@@ -1490,6 +1538,10 @@ so that the application may crash. Do you wish to continue visualization?</trans
     </message>
     <message>
         <source>SMESH_DRS_4</source>
+        <translation>MED file contains some elements in descending connectivity. They were not read.</translation>
+    </message>
+    <message>
+        <source>SMESH_DRS_5</source>
         <translation>The file is incorrect, some data is missed</translation>
     </message>
     <message>
@@ -1641,6 +1693,10 @@ Do you want to continue ?</translation>
         <source>SMESH_FACE</source>
         <translation>Face</translation>
     </message>
+    <message>
+        <source>SMESH_FACES</source>
+        <translation>Faces</translation>
+    </message>
     <message>
         <source>SMESH_FEATUREANGLE</source>
         <translation>Feature Angle</translation>
@@ -1836,6 +1892,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_LENGTH</source>
         <translation>Length</translation>
     </message>
+    <message>
+        <source>SMESH_LOGARITHMIC_SCALARBAR</source>
+        <translation>Logarithmic</translation>
+    </message>
     <message>
         <source>SMESH_MAKE_GROUPS</source>
         <translation>Generate groups</translation>
@@ -1910,7 +1970,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_MERGED_NODES</source>
-        <translation>%1 nodes successfully merged.</translation>
+        <translation>%1 groups of nodes successfully merged.</translation>
     </message>
     <message>
         <source>SMESH_NO_ELEMENTS_DETECTED</source>
@@ -2232,6 +2292,22 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_PRECISION</source>
         <translation>Precision</translation>
     </message>
+    <message>
+        <source>PREF_GROUP_NUMBERING</source>
+        <translation>Numbering</translation>
+    </message>
+    <message>
+        <source>PREF_NUMBERING_NODE</source>
+        <translation>Nodes: Color</translation>
+    </message>
+     <message>
+        <source>PREF_NUMBERING_ELEM</source>
+        <translation>Edges: Color</translation>
+    </message>
+    <message>
+        <source>PREF_NUMBERING_FONT</source>
+        <translation>Font</translation>
+    </message>
     <message>
         <source>SMESH_PREFERENCES_SCALARBAR</source>
         <translation>Scalar Bar Preferences</translation>
@@ -2360,6 +2436,26 @@ Check algorithm documentation for supported geometry</translation>
         <source>STB_BIQUADRATIC_QUADRANGLE</source>
         <translation>BiQuadratic Quadrangle</translation>
     </message>
+    <message>
+        <source>SMESH_BIQUADRATIC_TRIANGLE</source>
+        <translation>BiQuadratic Triangle</translation>
+    </message>
+    <message>
+        <source>SMESH_BIQUADRATIC_TRIANGLES</source>
+        <translation>BiQuadratic Triangles</translation>
+    </message>
+    <message>
+        <source>MEN_BIQUADRATIC_TRIANGLE</source>
+        <translation>BiQuadratic Triangle</translation>
+    </message>
+    <message>
+        <source>TOP_BIQUADRATIC_TRIANGLE</source>
+        <translation>BiQuadratic Triangle</translation>
+    </message>
+    <message>
+        <source>STB_BIQUADRATIC_TRIANGLE</source>
+        <translation>BiQuadratic Triangle</translation>
+    </message>
     <message>
         <source>SMESH_QUADRATIC_TETRAHEDRON</source>
         <translation>Quadratic Tetrahedron</translation>
@@ -2515,7 +2611,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_DUPLICATE_TITLE</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes and/or Elements</translation>
     </message>
     <message>
         <source>SMESH_SCALE</source>
@@ -2591,6 +2687,10 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_VISU_PROBLEM</source>
+        <translation>Mesh visualization failed</translation>
+    </message>
+    <message>
+        <source>SMESH_VISU_PROBLEM_MEMORY</source>
         <translation>Mesh visualization failed, probably due to lack of memory</translation>
     </message>
     <message>
@@ -2603,6 +2703,10 @@ Consider saving your work before application crash</translation>
         <source>SMESH_VOLUME</source>
         <translation>Volume</translation>
     </message>
+    <message>
+        <source>SMESH_VOLUMES</source>
+        <translation>Volumes</translation>
+    </message>
     <message>
         <source>SMESH_WARNING</source>
         <translation>Warning</translation>
@@ -2665,8 +2769,15 @@ Consider saving your work before application crash</translation>
     </message>
     <message>
         <source>SMESH_WRN_SIZE_LIMIT_EXCEEDED</source>
-        <translation>No automatic update of the presentation has been done: new mesh size (%1 elements) exceeds current size limit (%2 elements).
-Please check preferences of Mesh module.
+        <translation>No automatic update of the presentation has been done:
+New mesh size (%1 elements) exceeds current size limit of automatic update (%2 elements).
+</translation>
+    </message>
+    <message>
+        <source>SMESH_WRN_SIZE_INC_LIMIT_EXCEEDED</source>
+        <translation>New mesh size (%1 elements) exceeds current size limit of automatic update (%2 elements).
+The following elements are not shown: %3.
+Use Display Entity menu command to show them.
 </translation>
     </message>
     <message>
@@ -3239,7 +3350,7 @@ Please check preferences of Mesh module.
     </message>
     <message>
         <source>STB_DUPLICATE_NODES</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes or/and Elements</translation>
     </message>
     <message>
         <source>STB_TRANSP</source>
@@ -3306,12 +3417,44 @@ Please check preferences of Mesh module.
         <translation>Taper</translation>
     </message>
     <message>
-        <source>TB_ADD_REMOVE</source>
-        <translation>Add/Remove Toolbar</translation>
+        <source>TB_ADD</source>
+        <translation>Add Element Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_ADDNON</source>
+        <translation>Add Non Linear Element Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_REM</source>
+        <translation>Remove Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_RENUMBER</source>
+        <translation>Renumbering Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_TRANSFORM</source>
+        <translation>Transformation Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL0D</source>
+        <translation>Node Controls Toolbar</translation>
     </message>
     <message>
-        <source>TB_CTRL</source>
-        <translation>Controls Toolbar</translation>
+        <source>TB_CTRL1D</source>
+        <translation>Edge Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL2D</source>
+        <translation>Face Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL3D</source>
+        <translation>Volume Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_MEASUREM</source>
+        <translation>Measurements Toolbar</translation>
     </message>
     <message>
         <source>TB_DISP_MODE</source>
@@ -3325,6 +3468,18 @@ Please check preferences of Mesh module.
         <source>TB_MESH</source>
         <translation>Mesh Toolbar</translation>
     </message>
+    <message>
+        <source>TB_GROUP</source>
+        <translation>Group Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_INFO</source>
+        <translation>Information Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_ADD1D</source>
+        <translation>Mesh Toolbar</translation>
+    </message>
     <message>
         <source>TB_MODIFY</source>
         <translation>Modification Toolbar</translation>
@@ -3847,7 +4002,7 @@ Please check preferences of Mesh module.
     </message>
     <message>
         <source>TOP_DUPLICATE_NODES</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes or/and Elements</translation>
     </message>
     <message>
         <source>TOP_TRANSP</source>
@@ -3913,6 +4068,10 @@ Please check preferences of Mesh module.
         <source>UNKNOWN_CONTROL</source>
         <translation>Unknown</translation>
     </message>
+    <message>
+        <source>UPDATE_DESTINATION</source>
+        <translation>Update Destination</translation>
+    </message>
     <message>
         <source>VOLUME_3D_ELEMENTS</source>
         <translation>Volume</translation>
@@ -4044,6 +4203,22 @@ Input value precision can be adjusted using
         <translation>Selected object has been used to create another one.
 It can&apos;t be deleted </translation>
     </message>
+    <message>
+        <source>SMESH_FREERAM</source>
+        <translation>Free RAM</translation>
+    </message>
+    <message>
+        <source>SMESH_GIGABYTE</source>
+        <translation>%1 GB</translation>
+    </message>
+    <message>
+        <source>MEN_SORT_CHILD_ITEMS</source>
+        <translation>Sort children</translation>
+    </message>
+    <message>
+        <source>STB_SORT_CHILD_ITEMS</source>
+        <translation>Sort child items</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Dialog</name>
@@ -4103,6 +4278,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_UPDATE_LIMIT_NOLIMIT</source>
         <translation>No limit</translation>
     </message>
+    <message>
+        <source>PREF_INCREMENTAL_LIMIT</source>
+        <translation>Incremental limit check</translation>
+    </message>
     <message>
         <source>PREF_BACKFACE</source>
         <translation>Back surface color</translation>
@@ -4171,6 +4350,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_FILL</source>
         <translation>Surface color</translation>
     </message>
+    <message>
+        <source>PREF_PREVIEW_COLOR</source>
+        <translation>Preview color</translation>
+    </message>
     <message>
         <source>PREF_NOTIFY_MODE</source>
         <translation>Show a computation result notification</translation>
@@ -4199,10 +4382,34 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_ELEM_INFO_TREE</source>
         <translation>Tree</translation>
     </message>
+    <message>
+        <source>PREF_ELEM_INFO_GRP_DETAILS</source>
+        <translation>Show details on groups in element information tab</translation>
+    </message>
+    <message>
+        <source>PREF_DUMP_BASE_INFO</source>
+        <translation>Dump base information</translation>
+    </message>
+    <message>
+        <source>PREF_DUMP_ELEM_INFO</source>
+        <translation>Dump element information</translation>
+    </message>
+    <message>
+        <source>PREF_DUMP_ADD_INFO</source>
+        <translation>Dump additional information</translation>
+    </message>
+    <message>
+        <source>PREF_DUMP_CTRL_INFO</source>
+        <translation>Dump controls information</translation>
+    </message>
     <message>
         <source>PREF_GPP_NODES_LIMIT</source>
         <translation>Automatic nodes compute limit</translation>
     </message>
+    <message>
+        <source>PREF_CTRL_LIMIT</source>
+        <translation>Automatic controls compute limit</translation>
+    </message>
     <message>
         <source>SMESH_PREF_GROUP_PRECISION</source>
         <translation>Input fields precision</translation>
@@ -4435,6 +4642,10 @@ Please, create VTK viewer and try again</translation>
         <source>SMESH_ADD_QUADRATIC_TRIANGLE</source>
         <translation>Add Quadratic Triangle</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_BIQUADRATIC_TRIANGLE</source>
+        <translation>Add BiQuadratic Triangle</translation>
+    </message>
     <message>
         <source>SMESH_CORNER_NODES</source>
         <translation>Corner Nodes:</translation>
@@ -4544,6 +4755,25 @@ Please, create VTK viewer and try again</translation>
         <source>SHOW_BAD_MESH</source>
         <translation>Show bad Mesh</translation>
     </message>
+    <message>
+        <source>GROUP_OF_BAD_MESH</source>
+        <translation>Bad Mesh to Group</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_ComputeDlg_QThreadQDialog</name>
+    <message>
+        <source>CANCEL</source>
+        <translation>Cancel</translation>
+    </message>
+    <message>
+        <source>CANCELING</source>
+        <translation>Canceling...</translation>
+    </message>
+    <message>
+        <source>TITLE</source>
+        <translation>Compute</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_PrecomputeDlg</name>
@@ -4602,13 +4832,17 @@ Do you want to restore original submesh priority?</translation>
     </message>
     <message>
         <source>RADIOBTN_1</source>
-        <translation>Convert to quadratic</translation>
+        <translation>Convert to linear</translation>
     </message>
     <message>
         <source>RADIOBTN_2</source>
-        <translation>Convert from quadratic</translation>
+        <translation>Convert to quadratic</translation>
     </message>
-    <message>
+      <message>
+        <source>RADIOBTN_3</source>
+        <translation>Convert to bi-quadratic</translation>
+      </message>
+      <message>
         <source>NON_CONFORM_WARNING</source>
         <translation>Warning: mesh can become non-conformal</translation>
     </message>
@@ -4727,6 +4961,10 @@ Please verify validity of entered information</translation>
         <source>CAPTION</source>
         <translation>Cutting of quadrangles</translation>
     </message>
+    <message>
+        <source>TO_4_TRIA</source>
+        <translation>Cut into 4 triangles</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_DeleteGroupDlg</name>
@@ -4766,6 +5004,14 @@ Please select a group and try again</translation>
         <source>SELECT_ALL</source>
         <translation>Select all</translation>
     </message>
+    <message>
+        <source>SHOW_NODES_IDS</source>
+        <translation>Show double nodes IDs</translation>
+    </message>
+    <message>
+        <source>SHOW_ELEMS_IDS</source>
+        <translation>Show double elements IDs</translation>
+    </message>
     <message>
         <source>EXCLUDE_GROUPS</source>
         <translation>Exclude Groups</translation>
@@ -5164,6 +5410,14 @@ Please check input data and try again</translation>
         <source>COPLANAR_FACES</source>
         <translation>Coplanar faces</translation>
     </message>
+    <message>
+        <source>CONNECTED_ELEMS</source>
+        <translation>Elements of a domain</translation>
+    </message>
+  <message>
+    <source>NUMBEROFNODESINELEMENT</source>
+    <translation>Number Of Nodes In Element</translation>
+  </message>
     <message>
         <source>COPY_FROM</source>
         <translation>Copy from...</translation>
@@ -5184,10 +5438,6 @@ Please check input data and try again</translation>
         <source>EDGES</source>
         <translation>Edges</translation>
     </message>
-    <message>
-        <source>ENTITY_TYPE</source>
-        <translation>Entity type</translation>
-    </message>
     <message>
         <source>EQUAL_TO</source>
         <translation>Equal to</translation>
@@ -5335,6 +5585,110 @@ Please enter correct value and try again</translation>
         <source>ELEMENTS</source>
         <translation>Elements</translation>
     </message>
+    <message>
+        <source>ENTITY_TYPE</source>
+        <translation>Entity type</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_0</source>
+        <translation>NONE</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_1</source>
+        <translation>POINT1</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_2</source>
+        <translation>SEG2</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_3</source>
+        <translation>SEG3</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_4</source>
+        <translation>TRIA3</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_5</source>
+        <translation>TRIA6</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_6</source>
+        <translation>TRIA7</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_7</source>
+        <translation>QUAD4</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_8</source>
+        <translation>QUAD8</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_9</source>
+        <translation>QUAD9</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_10</source>
+        <translation>POLYGON</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_11</source>
+        <translation>QPOLYGON</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_12</source>
+        <translation>TETRA4</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_13</source>
+        <translation>TETRA10</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_14</source>
+        <translation>PYRA5</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_15</source>
+        <translation>PYRA13</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_16</source>
+        <translation>HEXA8</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_17</source>
+        <translation>HEXA20</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_18</source>
+        <translation>HEXA27</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_19</source>
+        <translation>PENTA6</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_20</source>
+        <translation>PENTA15</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_21</source>
+        <translation>OCTA12</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_22</source>
+        <translation>POLYEDRE</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_23</source>
+        <translation>QPOLYEDRE</translation>
+    </message>
+    <message>
+        <source>ENTITY_TYPE_24</source>
+        <translation>BALL</translation>
+    </message>
     <message>
         <source>GEOM_TYPE</source>
         <translation>Geometry type</translation>
@@ -5623,6 +5977,10 @@ Please specify them and try again</translation>
         <source>MESH</source>
         <translation>Mesh</translation>
     </message>
+    <message>
+        <source>MESH_TYPE</source>
+        <translation>Mesh type</translation>
+    </message>
     <message>
         <source>NAME</source>
         <translation>Name</translation>
@@ -5644,8 +6002,14 @@ Please specify them and try again</translation>
         <translation>No sense in creating a submesh ignored by global algorithm &quot;%1&quot;</translation>
     </message>
     <message>
-        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED</source>
-        <translation>Geometry object is not defined
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
+        <translation>Geometry object is not defined.
+Do you want to create an empty mesh 
+without algorithms and hypotheses? </translation>
+    </message>
+    <message>
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_SUBMESH</source>
+        <translation>Geometry object is not defined.
 Please specify it and try again</translation>
     </message>
     <message>
@@ -5677,6 +6041,26 @@ Please specify it and try again</translation>
         <source>MESH_IS_NULL</source>
         <translation>Mesh is null</translation>
     </message>
+    <message>
+        <source>MT_ANY</source>
+        <translation>Any</translation>
+    </message>
+    <message>
+        <source>MT_HEXAHEDRAL</source>
+        <translation>Hexahedral</translation>
+    </message>
+    <message>
+        <source>MT_TETRAHEDRAL</source>
+        <translation>Tetrahedral</translation>
+    </message>
+    <message>
+        <source>MT_TRIANGULAR</source>
+        <translation>Triangular</translation>
+    </message>
+    <message>
+        <source>MT_QUADRILATERAL</source>
+        <translation>Quadrilateral</translation>
+    </message>
     <message>
         <source>NAME_OF_MESH_IS_EMPTY</source>
         <translation>Name of mesh is empty
@@ -5692,6 +6076,14 @@ Please enter valid name and try again</translation>
         <translation>There is no object for editing. Please
 select mesh or sub-mesh and try again</translation>
     </message>
+    <message>
+        <source>CONCURRENT_SUBMESH_APPEARS</source>
+        <translation> 
+The assigned algorithm has the same priority as one assigned to an 
+adjacent sub-mesh, hence it's undefined which algorithm to use for
+meshing boundary shared by two sub-meshes. Would you like to set
+the order of sub-mesh computation? </translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshPatternDlg</name>
@@ -5854,6 +6246,14 @@ It is impossible to read point coordinates from file</translation>
         <source>NONE</source>
         <translation>&lt;None&gt;</translation>
     </message>
+    <message>
+        <source>DEFAULT</source>
+        <translation>&lt;Default&gt;</translation>
+    </message>
+    <message>
+        <source>SELECT</source>
+        <translation>&lt;Select&gt;</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MultiEditDlg</name>
@@ -5899,10 +6299,10 @@ It is impossible to read point coordinates from file</translation>
     </message>
 </context>
 <context>
-    <name>SMESHGUI_CuttingIntoTetraDlg</name>
+    <name>SMESHGUI_SplitVolumesDlg</name>
     <message>
         <source>CAPTION</source>
-        <translation>Splitting volumes into tetrahedra</translation>
+        <translation>Splitting volumes</translation>
     </message>
     <message>
         <source>SPLIT_METHOD</source>
@@ -5920,6 +6320,34 @@ It is impossible to read point coordinates from file</translation>
         <source>SPLIT_HEX_TO_24_TETRA</source>
         <translation>Into 24 tetrahedra</translation>
     </message>
+    <message>
+        <source>SPLIT_HEX_TO_2_PRISMS</source>
+        <translation>Into 2 prisms</translation>
+    </message>
+    <message>
+        <source>SPLIT_HEX_TO_4_PRISMS</source>
+        <translation>Into 4 Prisms</translation>
+    </message>
+    <message>
+        <source>TARGET_ELEM_TYPE</source>
+        <translation>Target element type</translation>
+    </message>
+    <message>
+        <source>FACET_TO_SPLIT</source>
+        <translation>Facet to split</translation>
+    </message>
+    <message>
+        <source>START_POINT</source>
+        <translation>Hexa location</translation>
+    </message>
+    <message>
+        <source>FACET_NORMAL</source>
+        <translation>Facet normal</translation>
+    </message>
+    <message>
+        <source>ALL_DOMAINS</source>
+        <translation>All domains</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_PrecisionDlg</name>
@@ -6198,6 +6626,10 @@ It is impossible to read point coordinates from file</translation>
         <source>CLIP_PLANES</source>
         <translation>Clipping planes</translation>
     </message>
+    <message>
+        <source>IS_OPENGL_CLIPPING</source>
+        <translation>OpenGL clipping</translation>
+    </message>
     <message>
         <source>MESHES_SUBMESHES_GROUPS</source>
         <translation>Meshes, sub-meshes and groups</translation>
@@ -6258,6 +6690,30 @@ It is impossible to read point coordinates from file</translation>
         <source>NO_PLANES</source>
         <translation>No planes</translation>
     </message>
+    <message>
+        <source>ABSOLUTE</source>
+        <translation>Absolute</translation>
+    </message>
+    <message>
+        <source>RELATIVE</source>
+        <translation>Relative</translation>
+    </message>
+    <message>
+        <source>BASE_POINT</source>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>DIRECTION</source>
+        <translation>Direction</translation>
+    </message>
+    <message>
+        <source>RESET</source>
+        <translation>Reset</translation>
+    </message>
+    <message>
+        <source>INVERT</source>
+        <translation>Invert</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_DuplicateNodesDlg</name>
@@ -6267,7 +6723,7 @@ It is impossible to read point coordinates from file</translation>
     </message>
     <message>
         <source>DUPLICATION_WITHOUT_ELEMS</source>
-        <translation>Without duplication of border elements</translation>
+        <translation>Duplicate nodes only</translation>
     </message>
     <message>
         <source>GROUP_NODES_TO_DUPLICATE</source>
@@ -6279,7 +6735,11 @@ It is impossible to read point coordinates from file</translation>
     </message>
     <message>
         <source>DUPLICATION_WITH_ELEMS</source>
-        <translation>With duplication of border elements</translation>
+        <translation>Duplicate nodes and border elements</translation>
+    </message>
+    <message>
+        <source>DUPLICATION_ONLY_ELEMS</source>
+        <translation>Duplicate elements only</translation>
     </message>
     <message>
         <source>GROUP_ELEMS_TO_DUPLICATE</source>
@@ -6396,6 +6856,10 @@ as they are of improper type:
 </context>
 <context>
     <name>SMESHGUI_MeshInfo</name>
+    <message>
+        <source>BASE_INFO</source>
+        <translation>Base information</translation>
+    </message>
     <message>
         <source>NAME_LAB</source>
         <translation>Name:</translation>
@@ -6539,6 +7003,10 @@ as they are of improper type:
         <source>ADDITIONAL_INFO</source>
         <translation>Additional Info</translation>
     </message>
+    <message>
+        <source>CTRL_INFO</source>
+        <translation>Quality Info</translation>
+    </message>
     <message>
         <source>NODE_MODE</source>
         <translation>Node</translation>
@@ -6547,6 +7015,18 @@ as they are of improper type:
         <source>ELEM_MODE</source>
         <translation>Element</translation>
     </message>
+    <message>
+        <source>BUT_DUMP_MESH</source>
+        <translation>&amp;Dump</translation>
+    </message>
+    <message>
+        <source>TEXT_FILES</source>
+        <translation>Text files (*.txt)</translation>
+    </message>
+    <message>
+        <source>SAVE_INFO</source>
+        <translation>Save info</translation>
+    </message>
     <message>
         <source>X_FROM_Y_ITEMS_SHOWN</source>
         <translation>%1-%2 from %3 items shown</translation>
@@ -6554,61 +7034,65 @@ as they are of improper type:
 </context>
 <context>
     <name>SMESHGUI_ElemInfo</name>
+    <message>
+        <source>ELEM_INFO</source>
+        <translation>Element information</translation>
+    </message>
     <message>
         <source>COORDINATES</source>
-        <translation>COORDINATES</translation>
+        <translation>Coordinates</translation>
     </message>
     <message>
         <source>CONNECTIVITY</source>
-        <translation>CONNECTIVITY</translation>
+        <translation>Connectivity</translation>
     </message>
     <message>
         <source>GRAVITY_CENTER</source>
-        <translation>GRAVITY CENTER</translation>
+        <translation>Gravity Center</translation>
     </message>
     <message>
         <source>NODE</source>
-        <translation>NODE</translation>
+        <translation>Node</translation>
     </message>
     <message>
         <source>0D_ELEMENT</source>
-        <translation>0D ELEMENT</translation>
+        <translation>0D Element</translation>
     </message>
     <message>
         <source>0D_ELEMENTS</source>
-        <translation>0D ELEMENTS</translation>
+        <translation>0D Elements</translation>
     </message>
     <message>
         <source>BALL_ELEMENT</source>
-        <translation>BALL ELEMENT</translation>
+        <translation>Ball Element</translation>
     </message>
     <message>
         <source>BALL_ELEMENTS</source>
-        <translation>BALL ELEMENTS</translation>
+        <translation>Ball Elements</translation>
     </message>
     <message>
         <source>EDGE</source>
-        <translation>EDGE</translation>
+        <translation>Edge</translation>
     </message>
     <message>
         <source>EDGES</source>
-        <translation>EDGES</translation>
+        <translation>Edges</translation>
     </message>
     <message>
         <source>FACE</source>
-        <translation>FACE</translation>
+        <translation>Face</translation>
     </message>
     <message>
         <source>FACES</source>
-        <translation>FACES</translation>
+        <translation>Faces</translation>
     </message>
     <message>
         <source>VOLUME</source>
-        <translation>VOLUME</translation>
+        <translation>Volume</translation>
     </message>
     <message>
         <source>VOLUMES</source>
-        <translation>VOLUMES</translation>
+        <translation>Volumes</translation>
     </message>
     <message>
         <source>FREE_NODE</source>
@@ -6616,7 +7100,7 @@ as they are of improper type:
     </message>
     <message>
         <source>TYPE</source>
-        <translation>TYPE</translation>
+        <translation>Type</translation>
     </message>
     <message>
         <source>TRIANGLE</source>
@@ -6656,7 +7140,7 @@ as they are of improper type:
     </message>
     <message>
         <source>QUADRATIC</source>
-        <translation>QUADRATIC</translation>
+        <translation>Quadratic</translation>
     </message>
     <message>
         <source>YES</source>
@@ -6666,6 +7150,57 @@ as they are of improper type:
         <source>NO</source>
         <translation>No</translation>
     </message>
+    <message>
+        <source>BALL_DIAMETER</source>
+        <translation>Diameter</translation>
+    </message>
+    <message>
+        <source>GEOM_VERTEX</source>
+        <translation>Vertex</translation>
+    </message>
+    <message>
+        <source>GEOM_EDGE</source>
+        <translation>Edge</translation>
+    </message>
+    <message>
+        <source>GEOM_FACE</source>
+        <translation>Face</translation>
+    </message>
+    <message>
+        <source>GEOM_SOLID</source>
+        <translation>Solid</translation>
+    </message>
+    <message>
+        <source>GEOM_SHELL</source>
+        <translation>Shell</translation>
+    </message>
+    <message>
+        <source>GEOM_SHAPE</source>
+        <translation>Shape</translation>
+    </message>
+    <message>
+        <source>POSITION</source>
+        <translation>Position</translation>
+    </message>
+    <message>
+        <source>U_POSITION</source>
+        <translation>U</translation>
+    </message>
+    <message>
+        <source>V_POSITION</source>
+        <translation>V</translation>
+    </message>
+    <message>
+        <source>CONTROLS</source>
+        <translation>Quality Controls</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_TreeElemInfo</name>
+    <message>
+      <source>SHOW_ITEM_INFO</source>
+      <translation>Show info</translation>
+    </message>
     <message>
         <source>PROPERTY</source>
         <translation>Property</translation>
@@ -6677,6 +7212,10 @@ as they are of improper type:
 </context>
 <context>
     <name>SMESHGUI_AddInfo</name>
+    <message>
+        <source>ADDITIONAL_INFO</source>
+        <translation>Additional information</translation>
+    </message>
     <message>
         <source>NAME</source>
         <translation>Name</translation>
@@ -6834,6 +7373,96 @@ as they are of improper type:
         <translation>Vertex</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_CtrlInfo</name>
+    <message>
+        <source>CTRL_INFO</source>
+        <translation>Quality information</translation>
+    </message>
+    <message>
+        <source>NAME_LAB</source>
+        <translation>Name:</translation>
+    </message>
+    <message>
+        <source>VALUE</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>BUT_COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+    <message>
+        <source>NODES_INFO</source>
+        <translation>Nodes Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_FREE_NODES</source>
+        <translation>Number of the free nodes</translation>
+    </message>
+    <message>
+        <source>DOUBLE_NODES_TOLERANCE</source>
+        <translation>Double nodes tolerance</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_NODES</source>
+        <translation>Number of the double nodes</translation>
+    </message>
+    <message>
+        <source>EDGES_INFO</source>
+        <translation>Edges Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_EDGES</source>
+        <translation>Number of the double edges</translation>
+    </message>
+    <message>
+        <source>FACES_INFO</source>
+        <translation>Faces Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_FACES</source>
+        <translation>Number of the double faces</translation>
+    </message>   
+    <message>
+        <source>ASPECT_RATIO_HISTOGRAM</source>
+        <translation>Aspect Ratio histogram</translation>
+    </message>
+    <message>
+        <source>VOLUMES_INFO</source>
+        <translation>Volumes Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_VOLUMES</source>
+        <translation>Number of the double volumes</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_OVER_CONSTRAINED</source>
+        <translation>Number of the over-constrained</translation>
+    </message>
+    <message>
+        <source>ASPECT_RATIO_3D_HISTOGRAM</source>
+        <translation>Aspect Ratio 3D histogram</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_CtrlInfoDlg</name>
+    <message>
+        <source>CTRL_INFO</source>
+        <translation>Quality Info</translation>
+    </message>
+    <message>
+        <source>BUT_DUMP_MESH</source>
+        <translation>&amp;Dump</translation>
+    </message>
+    <message>
+        <source>TEXT_FILES</source>
+        <translation>Text files (*.txt)</translation>
+    </message>
+    <message>
+        <source>SAVE_INFO</source>
+        <translation>Save info</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_MinDistance</name>
     <message>
@@ -6873,6 +7502,33 @@ as they are of improper type:
         <translation>Distance</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_BasicProperties</name>
+    <message>
+        <source>PROPERTY</source>
+        <translation>Property</translation>
+    </message>
+    <message>
+        <source>LENGTH</source>
+        <translation>Length</translation>
+    </message>
+    <message>
+        <source>AREA</source>
+        <translation>Area</translation>
+    </message>
+    <message>
+        <source>VOLUME</source>
+        <translation>Volume</translation>
+    </message>
+    <message>
+        <source>SOURCE_MESH_SUBMESH_GROUP</source>
+        <translation>Source (mesh, sub-mesh or group)</translation>
+    </message>
+    <message>
+        <source>COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_CopyMeshDlg</name>
     <message>
@@ -6902,6 +7558,10 @@ as they are of improper type:
         <source>BND_BOX</source>
         <translation>Bounding Box</translation>
     </message>
+    <message>
+        <source>BASIC_PROPERTIES</source>
+        <translation>Basic Properties</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_BoundingBox</name>