Salome HOME
projects / modules / smesh.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
23080: [CEA 1497] Do not merge a middle node in quadratic with the extreme nodes...
[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts
diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index afca8a694dffbe90b329cba8fdaa4d98755cdcf3..45fef3733593638fdce486d31c4b204c347cfe4c 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -286,7 +286,7 @@
     </message>
     <message>
         <source>MEN_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>MEN_CREATE_GROUP</source>
@@ -396,6 +396,10 @@
         <source>MEN_EDGES</source>
         <translation>Edges</translation>
     </message>
+    <message>
+        <source>MEN_CHOOSE</source>
+        <translation>Choose...</translation>
+    </message>
     <message>
         <source>MEN_EDIT</source>
         <translation>Edit</translation>
@@ -470,15 +474,15 @@
     </message>
     <message>
         <source>TOP_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>MEN_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>STB_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>TOP_FIND_ELEM</source>
@@ -744,7 +748,7 @@
         <source>TOP_MEASURE_AREA</source>
         <translation>Area</translation>
     </message>
-     <message>
+    <message>
         <source>MEN_MEASURE_VOLUME</source>
         <translation>Volume</translation>
     </message>
@@ -788,6 +792,10 @@
         <source>MEN_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>MEN_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>MEN_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -928,6 +936,10 @@
         <source>MEN_SHADE</source>
         <translation>Shading</translation>
     </message>
+    <message>
+        <source>MEN_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>MEN_QUADRATIC_REPRESENT</source>
         <translation>2D Quadratic</translation>
@@ -1034,7 +1046,7 @@
     </message>
     <message>
         <source>MEN_UNDERLYING_ELEMS</source>
-        <translation>Group of underlying entities</translation>
+        <translation>Group based on nodes of other groups</translation>
     </message>
     <message>
         <source>MEN_UPDATE</source>
@@ -1066,15 +1078,15 @@
     </message>
     <message>
         <source>MEN_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>TOP_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>STB_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>MESHERS_FILE_CANT_OPEN</source>
@@ -1119,8 +1131,13 @@ Please, select a mesh and try again</translation>
 Please enter a name of new group to be created or choose an existing one.</translation>
     </message>
     <message>
-        <source>MESH_STANDALONE_GRP_CHOSEN</source>
+        <source>MESH_GEOM_GRP_CHOSEN</source>
         <translation>Group on geometry is chosen: %1.
+Do you want to convert it to the standalone group?</translation>
+    </message>
+    <message>
+        <source>MESH_FILTER_GRP_CHOSEN</source>
+        <translation>Group on filter is chosen: %1.
 Do you want to convert it to the standalone group?</translation>
     </message>
     <message>
@@ -1217,6 +1234,14 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_POLYGON_TITLE</source>
         <translation>Add Polygon</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON</source>
+        <translation>Add Quadratic polygon</translation>
+    </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON_TITLE</source>
+        <translation>Add Quadratic Polygon</translation>
+    </message>
     <message>
         <source>SMESH_ADD_PENTA</source>
         <translation>Add pentahedron</translation>
@@ -1283,7 +1308,7 @@ Please enter correct values and try again</translation>
     </message>
     <message>
         <source>SMESH_ADD_SUBMESH</source>
-        <translation>SubMesh Construction</translation>
+        <translation>Sub-mesh Construction</translation>
     </message>
     <message>
         <source>SMESH_ADD_TETRAS</source>
@@ -1689,6 +1714,10 @@ Do you want to continue ?</translation>
         <source>SMESH_EXTRUSION_ALONG_VECTOR</source>
         <translation>Extrusion Along Vector</translation>
     </message>
+    <message>
+        <source>SMESH_EXTRUSION_BY_NORMAL</source>
+        <translation>Extrusion By Normal</translation>
+    </message>
     <message>
         <source>SMESH_FACE</source>
         <translation>Face</translation>
@@ -1797,7 +1826,7 @@ add the exported data to its contents?</translation>
     </message>
     <message>
         <source>SMESH_HYP_10</source>
-        <translation>Hypothesis and submesh dimensions mismatch</translation>
+        <translation>Hypothesis and sub-mesh dimensions mismatch</translation>
     </message>
     <message>
         <source>SMESH_HYP_11</source>
@@ -1822,7 +1851,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_HYP_4</source>
-        <translation>Submesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
+        <translation>Sub-mesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
     </message>
     <message>
         <source>SMESH_HYP_5</source>
@@ -1845,20 +1874,20 @@ Check algorithm documentation for supported geometry</translation>
         <translation>Such dimention hypothesis is already assigned to the shape</translation>
     </message>
     <message>
-        <source>SMESH_ID_DIAGONAL</source>
-        <translation>Id Edges</translation>
+        <source>SMESH_ID_EDGES</source>
+        <translation>Edge IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_ELEMENTS</source>
-        <translation>Id Elements</translation>
+        <translation>Element IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_FACES</source>
-        <translation>Id Faces</translation>
+        <translation>Face IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_NODES</source>
-        <translation>Id Nodes</translation>
+        <translation>Node IDs</translation>
     </message>
     <message>
         <source>SMESH_INCORRECT_INPUT</source>
@@ -1930,23 +1959,23 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnCompound</source>
-        <translation>SubMeshes On Compound</translation>
+        <translation>Sub-meshes On Compound</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnEdge</source>
-        <translation>SubMeshes On Edge</translation>
+        <translation>Sub-meshes On Edge</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnFace</source>
-        <translation>SubMeshes On Face</translation>
+        <translation>Sub-meshes On Face</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnSolid</source>
-        <translation>SubMeshes On Solid</translation>
+        <translation>Sub-meshes On Solid</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnVertex</source>
-        <translation>SubMeshes On Vertex</translation>
+        <translation>Sub-meshes On Vertex</translation>
     </message>
     <message>
         <source>SMESH_AUTOMATIC</source>
@@ -2040,6 +2069,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_MESHINFO_ORDER2</source>
         <translation>Quadratic</translation>
     </message>
+    <message>
+        <source>SMESH_MESHINFO_ORDER3</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
     <message>
         <source>SMESH_MESHINFO_HEXAPRISM</source>
         <translation>Hexagonal prisms</translation>
@@ -2156,9 +2189,13 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_OBJECT_MESH</source>
         <translation>Mesh</translation>
     </message>
+    <message>
+        <source>SMESH_OBJECTS</source>
+        <translation>Objects</translation>
+    </message>
     <message>
         <source>SMESH_OBJECT_MESHorSUBMESH</source>
-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_OPERATION_FAILED</source>
@@ -2300,9 +2337,9 @@ Check algorithm documentation for supported geometry</translation>
         <source>PREF_NUMBERING_NODE</source>
         <translation>Nodes: Color</translation>
     </message>
-     <message>
+    <message>
         <source>PREF_NUMBERING_ELEM</source>
-        <translation>Edges: Color</translation>
+        <translation>Elements: Color</translation>
     </message>
     <message>
         <source>PREF_NUMBERING_FONT</source>
@@ -2565,6 +2602,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_SEWING</source>
         <translation>Sewing</translation>
     </message>
+    <message>
+        <source>SMESH_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>SMESH_SMOOTHING</source>
         <translation>Smoothing</translation>
@@ -2575,11 +2616,11 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_SUBMESH</source>
-        <translation>SubMesh</translation>
+        <translation>Sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_SUBMESH_SELECTED</source>
-        <translation>%1 SubMeshes</translation>
+        <translation>%1 Sub-meshes</translation>
     </message>
     <message>
         <source>SMESH_SYMMETRY</source>
@@ -2902,7 +2943,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>STB_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>STB_CREATE_GROUP</source>
@@ -3200,6 +3241,10 @@ Use Display Entity menu command to show them.
         <source>STB_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>STB_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>STB_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -3312,6 +3357,10 @@ Use Display Entity menu command to show them.
         <source>STB_SHOW</source>
         <translation>Show</translation>
     </message>
+    <message>
+        <source>STB_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>STB_SHRINK</source>
         <translation>Shrink</translation>
@@ -3386,7 +3435,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>STB_UNDERLYING_ELEMS</source>
-        <translation>Create groups of entities from existing groups of superior dimensions</translation>
+        <translation>Create groups of entities basing on nodes of other groups</translation>
     </message>
     <message>
         <source>STB_UPDATE</source>
@@ -3562,7 +3611,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>TOP_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>TOP_CREATE_GROUP</source>
@@ -3852,6 +3901,10 @@ Use Display Entity menu command to show them.
         <source>TOP_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>TOP_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>TOP_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -4038,7 +4091,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>TOP_UNDERLYING_ELEMS</source>
-        <translation>Create groups of entities from existing groups of superior dimensions</translation>
+        <translation>Create groups of entities basing on nodes of other groups</translation>
     </message>
     <message>
         <source>TOP_UPDATE</source>
@@ -4220,19 +4273,30 @@ It can&apos;t be deleted </translation>
         <translation>Sort child items</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_FieldSelectorWdg</name>
+    <message>
+        <source>FIELDS_TO_EXPORT</source>
+        <translation>Export Fields</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_Dialog</name>
     <message>
         <source>DLG_MESH</source>
-        <translation>meshes</translation>
+        <translation>mesh(s)</translation>
     </message>
     <message>
         <source>DLG_HYPO</source>
-        <translation>hypotheses</translation>
+        <translation>hypothesis(s)</translation>
     </message>
     <message>
         <source>DLG_ALGO</source>
-        <translation>algorithms</translation>
+        <translation>algorithm(s)</translation>
+    </message>
+    <message>
+        <source>DLG_GEOM</source>
+        <translation>object(s)</translation>
     </message>
 </context>
 <context>
@@ -4305,7 +4369,7 @@ Please, create VTK viewer and try again</translation>
     <message>
         <source>PREF_PRE_SELECTION</source>
         <translation>Pre-selection color</translation>
-    </message>    
+    </message>
     <message>
         <source>PREF_COLOR</source>
         <translation>Color</translation>
@@ -4327,17 +4391,25 @@ Please, create VTK viewer and try again</translation>
         <translation>Display entity</translation>
     </message>
     <message>
-        <source>QUADRATIC_REPRESENT_MODE</source>
+        <source>QUADRATIC_REPRESENT_MODE_GROUP</source>
         <translation>Representation of the 2D quadratic elements</translation>
     </message>
+    <message>
+        <source>QUADRATIC_REPRESENT_MODE</source>
+        <translation>Default mode of the 2D quadratic elements</translation>
+    </message>
     <message>
         <source>MAX_ARC_ANGLE</source>
         <translation>Maximum angle</translation>
     </message>
     <message>
-        <source>PREF_DISPLAY_MODE</source>
+        <source>PREF_DISPLAY_MODE_GROUP</source>
         <translation>Display mode</translation>
     </message>
+    <message>
+        <source>PREF_DISPLAY_MODE</source>
+        <translation>Default display mode</translation>
+    </message>
     <message>
         <source>PREF_ELEMENTS</source>
         <translation>Elements</translation>
@@ -4548,7 +4620,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_COLOR_0D</source>
-        <translation>0D elements</translation>
+        <translation>0D element color</translation>
     </message>
     <message>
         <source>PREF_SIZE_0D</source>
@@ -4556,12 +4628,20 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_BALL_COLOR</source>
-        <translation>Balls</translation>
+        <translation>Ball color</translation>
+    </message>
+    <message>
+        <source>PREF_BALL_DIAMETER</source>
+        <translation>Default diameter of ball elements</translation>
     </message>
     <message>
         <source>PREF_BALL_SIZE</source>
         <translation>Size of ball elements</translation>
     </message>
+    <message>
+        <source>PREF_BALL_SCALE</source>
+        <translation>Scale factor of ball elements</translation>
+    </message>
     <message>
         <source>PREF_WIDTH</source>
         <translation>Line width</translation>
@@ -4581,6 +4661,10 @@ Please, create VTK viewer and try again</translation>
         <source>ALLOW_ELEM_LIST_MODIF</source>
         <translation>Enable manual edition</translation>
     </message>
+    <message>
+        <source>SELECT_ALL</source>
+        <translation>Select All</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Add0DElemsOnAllNodesDlg</name>
@@ -4683,7 +4767,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>CREATE_COMMON_GROUPS</source>
-        <translation>Create common groups for initial meshes</translation>
+        <translation>Create groups from input objects</translation>
     </message>
     <message>
         <source>MERGE_NODES_AND_ELEMENTS</source>
@@ -4691,7 +4775,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>MESHES</source>
-        <translation>Meshes</translation>
+        <translation>Meshes, sub-meshes, groups</translation>
     </message>
     <message>
         <source>PROCESSING_IDENTICAL_GROUPS</source>
@@ -4802,9 +4886,9 @@ Please, create VTK viewer and try again</translation>
     <name>SMESHGUI_PrecomputeOp</name>
     <message>
         <source>CLEAR_SUBMESH_QUESTION</source>
-        <translation>Temporary submeshes on the selected geometry
+        <translation>Temporary sub-meshes on the selected geometry
 were created during preview operation.
-Do you want to remove all these submeshes?</translation>
+Do you want to remove all these sub-meshes?</translation>
     </message>
     <message>
         <source>SMESH_WRN_NOTHING_PREVIEW</source>
@@ -4812,8 +4896,8 @@ Do you want to remove all these submeshes?</translation>
     </message>
     <message>
         <source>SMESH_REJECT_MESH_ORDER</source>
-        <translation>The submesh priority changed during preview operation.
-Do you want to restore original submesh priority?</translation>
+        <translation>The sub-mesh priority changed during preview operation.
+Do you want to restore original sub-mesh priority?</translation>
     </message>
 </context>
 <context>
@@ -4838,11 +4922,11 @@ Do you want to restore original submesh priority?</translation>
         <source>RADIOBTN_2</source>
         <translation>Convert to quadratic</translation>
     </message>
-      <message>
+    <message>
         <source>RADIOBTN_3</source>
         <translation>Convert to bi-quadratic</translation>
-      </message>
-      <message>
+    </message>
+    <message>
         <source>NON_CONFORM_WARNING</source>
         <translation>Warning: mesh can become non-conformal</translation>
     </message>
@@ -4909,7 +4993,7 @@ Please verify validity of entered information</translation>
     </message>
     <message>
         <source>MESH_OR_SUBMESH</source>
-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>
     </message>
     <message>
         <source>PATTERN</source>
@@ -5016,6 +5100,10 @@ Please select a group and try again</translation>
         <source>EXCLUDE_GROUPS</source>
         <translation>Exclude Groups</translation>
     </message>
+    <message>
+        <source>SEPARATE_CORNERS_AND_MEDIUM</source>
+        <translation>No merge of corner and medium nodes</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_ExtrusionAlongPathDlg</name>
@@ -5073,7 +5161,7 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_PATH_MESH</source>
-        <translation>Mesh or submesh</translation>
+        <translation>Mesh or sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_PATH_SHAPE</source>
@@ -5114,6 +5202,14 @@ Please select a group and try again</translation>
         <source>EXTRUSION_ALONG_LINE</source>
         <translation>Extrusion along a line</translation>
     </message>
+    <message>
+        <source>BY_AVERAGE_NORMAL</source>
+        <translation>Along average normal</translation>
+    </message>
+    <message>
+        <source>USE_INPUT_ELEMS_ONLY</source>
+        <translation>Use only input elements</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FilterDlg</name>
@@ -5124,7 +5220,7 @@ Please select valid object and try again</translation>
     </message>
     <message>
         <source>CURRENT_DIALOG</source>
-        <translation>Current Group</translation>
+        <translation>Current Dialog</translation>
     </message>
     <message>
         <source>EDGES_TLT</source>
@@ -5378,6 +5474,10 @@ Please check input data and try again</translation>
         <source>OVER_CONSTRAINED_FACE</source>
         <translation>Over-constrained faces</translation>
     </message>
+    <message>
+        <source>BELONG_TO_MESH_GROUP</source>
+        <translation>Belong to Mesh Group</translation>
+    </message>
     <message>
         <source>BELONG_TO_CYLINDER</source>
         <translation>Belong to Cylinder</translation>
@@ -5414,10 +5514,10 @@ Please check input data and try again</translation>
         <source>CONNECTED_ELEMS</source>
         <translation>Elements of a domain</translation>
     </message>
-  <message>
-    <source>NUMBEROFNODESINELEMENT</source>
-    <translation>Number Of Nodes In Element</translation>
-  </message>
+    <message>
+        <source>NUMBEROFNODESINELEMENT</source>
+        <translation>Number Of Nodes In Element</translation>
+    </message>
     <message>
         <source>COPY_FROM</source>
         <translation>Copy from...</translation>
@@ -5771,8 +5871,8 @@ Please specify non-empty name and try again</translation>
 Please specify them and try again</translation>
     </message>
     <message>
-        <source>NAME</source>
-        <translation>Name</translation>
+        <source>RESULT</source>
+        <translation>Result</translation>
     </message>
     <message>
         <source>OBJECT_1</source>
@@ -5784,7 +5884,7 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>RESULT_NAME</source>
-        <translation>Result name</translation>
+        <translation>Group name</translation>
     </message>
     <message>
         <source>TOOL_OBJECT</source>
@@ -5795,13 +5895,6 @@ Please specify them and try again</translation>
         <translation>Union of two groups</translation>
     </message>
 </context>
-<context>
-    <name>SMESHGUI_GroupDlg</name>
-    <message>
-        <source>SELECT_ALL</source>
-        <translation>Select All</translation>
-    </message>
-</context>
 <context>
     <name>SMESHGUI_UnionGroupsDlg</name>
     <message>
@@ -5813,27 +5906,35 @@ Please specify them and try again</translation>
     <name>SMESHGUI_DimGroupDlg</name>
     <message>
         <source>CREATE_GROUP_OF_UNDERLYING_ELEMS</source>
-        <translation>Create group of underlying entities</translation>
+        <translation>Group based on nodes of other groups</translation>
     </message>
     <message>
         <source>ELEMENTS_TYPE</source>
         <translation>Elements type</translation>
     </message>
     <message>
-        <source>NODE</source>
-        <translation>Node</translation>
+        <source>UNDERLYING_ENTITIES_ONLY</source>
+        <translation>Include underlying entities only</translation>
     </message>
     <message>
-        <source>EDGE</source>
-        <translation>Edge</translation>
+        <source>NUMBER_OF_COMMON_NODES</source>
+        <translation>Number of common nodes</translation>
     </message>
     <message>
-        <source>FACE</source>
-        <translation>Face</translation>
+        <source>ALL</source>
+        <translation>All</translation>
     </message>
     <message>
-        <source>VOLUME</source>
-        <translation>Volume</translation>
+        <source>MAIN</source>
+        <translation>Main</translation>
+    </message>
+    <message>
+        <source>AT_LEAST_ONE</source>
+        <translation>At least one</translation>
+    </message>
+    <message>
+        <source>MAJORITY</source>
+        <translation>Majority</translation>
     </message>
 </context>
 <context>
@@ -5977,6 +6078,10 @@ Please specify them and try again</translation>
         <source>MESH</source>
         <translation>Mesh</translation>
     </message>
+    <message>
+        <source>MESH_TYPE</source>
+        <translation>Mesh type</translation>
+    </message>
     <message>
         <source>NAME</source>
         <translation>Name</translation>
@@ -5990,16 +6095,22 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>EDIT_SUBMESH_QUESTION</source>
-        <translation>A submesh on the selected geometry already exists.
- Do you want to edit this submesh?</translation>
+        <translation>A sub-mesh on the selected geometry already exists.
+ Do you want to edit this sub-mesh?</translation>
     </message>
     <message>
         <source>SUBMESH_NOT_ALLOWED</source>
-        <translation>No sense in creating a submesh ignored by global algorithm &quot;%1&quot;</translation>
+        <translation>No sense in creating a sub-mesh ignored by global algorithm &quot;%1&quot;</translation>
     </message>
     <message>
-        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED</source>
-        <translation>Geometry object is not defined
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
+        <translation>Geometry object is not defined.
+Do you want to create an empty mesh 
+without algorithms and hypotheses? </translation>
+    </message>
+    <message>
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_SUBMESH</source>
+        <translation>Geometry object is not defined.
 Please specify it and try again</translation>
     </message>
     <message>
@@ -6031,6 +6142,26 @@ Please specify it and try again</translation>
         <source>MESH_IS_NULL</source>
         <translation>Mesh is null</translation>
     </message>
+    <message>
+        <source>MT_ANY</source>
+        <translation>Any</translation>
+    </message>
+    <message>
+        <source>MT_HEXAHEDRAL</source>
+        <translation>Hexahedral</translation>
+    </message>
+    <message>
+        <source>MT_TETRAHEDRAL</source>
+        <translation>Tetrahedral</translation>
+    </message>
+    <message>
+        <source>MT_TRIANGULAR</source>
+        <translation>Triangular</translation>
+    </message>
+    <message>
+        <source>MT_QUADRILATERAL</source>
+        <translation>Quadrilateral</translation>
+    </message>
     <message>
         <source>NAME_OF_MESH_IS_EMPTY</source>
         <translation>Name of mesh is empty
@@ -6038,7 +6169,7 @@ Please enter valid name and try again</translation>
     </message>
     <message>
         <source>NAME_OF_SUBMESH_IS_EMPTY</source>
-        <translation>Name of submesh is empty
+        <translation>Name of sub-mesh is empty
 Please enter valid name and try again</translation>
     </message>
     <message>
@@ -6046,6 +6177,14 @@ Please enter valid name and try again</translation>
         <translation>There is no object for editing. Please
 select mesh or sub-mesh and try again</translation>
     </message>
+    <message>
+        <source>CONCURRENT_SUBMESH_APPEARS</source>
+        <translation> 
+The assigned algorithm has the same priority as one assigned to an 
+adjacent sub-mesh, hence it&apos;s undefined which algorithm to use for
+meshing boundary shared by two sub-meshes. Would you like to set
+the order of sub-mesh computation? </translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshPatternDlg</name>
@@ -6208,6 +6347,14 @@ It is impossible to read point coordinates from file</translation>
         <source>NONE</source>
         <translation>&lt;None&gt;</translation>
     </message>
+    <message>
+        <source>DEFAULT</source>
+        <translation>&lt;Default&gt;</translation>
+    </message>
+    <message>
+        <source>SELECT</source>
+        <translation>&lt;Select&gt;</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MultiEditDlg</name>
@@ -6253,10 +6400,10 @@ It is impossible to read point coordinates from file</translation>
     </message>
 </context>
 <context>
-    <name>SMESHGUI_CuttingIntoTetraDlg</name>
+    <name>SMESHGUI_SplitVolumesDlg</name>
     <message>
         <source>CAPTION</source>
-        <translation>Splitting volumes into tetrahedra</translation>
+        <translation>Splitting volumes</translation>
     </message>
     <message>
         <source>SPLIT_METHOD</source>
@@ -6274,6 +6421,34 @@ It is impossible to read point coordinates from file</translation>
         <source>SPLIT_HEX_TO_24_TETRA</source>
         <translation>Into 24 tetrahedra</translation>
     </message>
+    <message>
+        <source>SPLIT_HEX_TO_2_PRISMS</source>
+        <translation>Into 2 prisms</translation>
+    </message>
+    <message>
+        <source>SPLIT_HEX_TO_4_PRISMS</source>
+        <translation>Into 4 Prisms</translation>
+    </message>
+    <message>
+        <source>TARGET_ELEM_TYPE</source>
+        <translation>Target element type</translation>
+    </message>
+    <message>
+        <source>FACET_TO_SPLIT</source>
+        <translation>Facet to split</translation>
+    </message>
+    <message>
+        <source>START_POINT</source>
+        <translation>Hexa location</translation>
+    </message>
+    <message>
+        <source>FACET_NORMAL</source>
+        <translation>Facet normal</translation>
+    </message>
+    <message>
+        <source>ALL_DOMAINS</source>
+        <translation>All domains</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_PrecisionDlg</name>
@@ -6301,8 +6476,8 @@ It is impossible to read point coordinates from file</translation>
         <translation>Preview</translation>
     </message>
     <message>
-        <source>REVOLUTION_1D</source>
-        <translation>Revolution of 1D elements</translation>
+        <source>REVOLUTION</source>
+        <translation>Revolution</translation>
     </message>
     <message>
         <source>REVOLUTION_2D</source>
@@ -6536,14 +6711,14 @@ It is impossible to read point coordinates from file</translation>
     <name>SMESHGUI_MeshOrderDlg</name>
     <message>
         <source>SMESH_MESHORDER_TITLE</source>
-        <translation>Order of submesh in meshing process</translation>
+        <translation>Order of sub-mesh in meshing process</translation>
     </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOrderOp</name>
     <message>
         <source>SMESH_NO_CONCURENT_MESH</source>
-        <translation>No concurent submeshes detected</translation>
+        <translation>No concurent sub-meshes detected</translation>
     </message>
 </context>
 <context>
@@ -6667,6 +6842,10 @@ It is impossible to read point coordinates from file</translation>
         <source>DUPLICATION_ONLY_ELEMS</source>
         <translation>Duplicate elements only</translation>
     </message>
+    <message>
+        <source>DUPLICATION_GROUP_BOUNDARY</source>
+        <translation>Duplicate nodes on group boundaries</translation>
+    </message>
     <message>
         <source>GROUP_ELEMS_TO_DUPLICATE</source>
         <translation>Group of elements to duplicate</translation>
@@ -6679,6 +6858,10 @@ It is impossible to read point coordinates from file</translation>
         <source>GROUP_ELEMS_TO_REPLACE</source>
         <translation>Group of elements to replace nodes with new ones</translation>
     </message>
+    <message>
+        <source>GROUP_VOLUME_GROUPS</source>
+        <translation>Groups (faces or volumes)</translation>
+    </message>
     <message>
         <source>CONSTRUCT_NEW_GROUP_NODES</source>
         <translation>Construct group with newly created nodes</translation>
@@ -6687,6 +6870,14 @@ It is impossible to read point coordinates from file</translation>
         <source>CONSTRUCT_NEW_GROUP_ELEMENTS</source>
         <translation>Construct group with newly created elements</translation>
     </message>
+    <message>
+        <source>CREATE_JOINT_ELEMENTS</source>
+        <translation>Create joint elements</translation>
+    </message>
+    <message>
+        <source>ON_ALL_BOUNDARIES</source>
+        <translation>On all boundaries</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Make2DFrom3DDlg</name>
@@ -6761,7 +6952,7 @@ as they are of improper type:
     </message>
     <message>
         <source>SMESH_NOT_ONLY_GROUPS</source>
-        <translation>Can't process meshes and groups at once</translation>
+        <translation>Can&apos;t process meshes and groups at once</translation>
     </message>
     <message>
         <source>SMESH_ERR_NO_3D_ELEMENTS</source>
@@ -6814,6 +7005,10 @@ as they are of improper type:
         <source>QUADRATIC_LAB</source>
         <translation>Quadratic</translation>
     </message>
+    <message>
+        <source>BI_QUADRATIC_LAB</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
     <message>
         <source>0D_LAB</source>
         <translation>0D:</translation>
@@ -6976,6 +7171,10 @@ as they are of improper type:
         <source>GRAVITY_CENTER</source>
         <translation>Gravity Center</translation>
     </message>
+    <message>
+        <source>NORMAL_VECTOR</source>
+        <translation>Normal</translation>
+    </message>
     <message>
         <source>NODE</source>
         <translation>Node</translation>
@@ -7124,8 +7323,8 @@ as they are of improper type:
 <context>
     <name>SMESHGUI_TreeElemInfo</name>
     <message>
-      <source>SHOW_ITEM_INFO</source>
-      <translation>Show info</translation>
+        <source>SHOW_ITEM_INFO</source>
+        <translation>Show info</translation>
     </message>
     <message>
         <source>PROPERTY</source>
@@ -7348,7 +7547,7 @@ as they are of improper type:
     <message>
         <source>NUMBER_OF_THE_DOUBLE_FACES</source>
         <translation>Number of the double faces</translation>
-    </message>   
+    </message>
     <message>
         <source>ASPECT_RATIO_HISTOGRAM</source>
         <translation>Aspect Ratio histogram</translation>
@@ -7546,7 +7745,7 @@ as they are of improper type:
     <name>SMESHGUI_ReorientFacesDlg</name>
     <message>
         <source>CAPTION</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>REORIENT_FACES</source>
@@ -7576,6 +7775,14 @@ as they are of improper type:
         <source>ORIENTATION</source>
         <translation>Orientation</translation>
     </message>
+    <message>
+        <source>VOLUMES</source>
+        <translation>Volumes</translation>
+    </message>
+    <message>
+        <source>OUTSIDE_VOLUME_NORMAL</source>
+        <translation>Face normal outside volume</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_ReorientFacesOp</name>
@@ -7583,10 +7790,18 @@ as they are of improper type:
         <source>NO_OBJECT_SELECTED</source>
         <translation>No object selected</translation>
     </message>
+    <message>
+        <source>NO_VOLUME_OBJECT_SELECTED</source>
+        <translation>No volume object selected</translation>
+    </message>
     <message>
         <source>NO_FACES</source>
         <translation>Object includes no faces</translation>
     </message>
+    <message>
+        <source>NO_VOLUMES</source>
+        <translation>Volume object includes no volumes</translation>
+    </message>
     <message>
         <source>ZERO_SIZE_VECTOR</source>
         <translation>Zero size vector</translation>
@@ -7667,7 +7882,7 @@ as they are of improper type:
         <translation>Size:</translation>
     </message>
     <message>
-        <source>ORIENTATION_SCALE</source>
+        <source>SCALE_FACTOR</source>
         <translation>Scale:</translation>
     </message>
     <message>
@@ -7679,4 +7894,11 @@ as they are of improper type:
         <translation>Shrink coef:</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_DisplayEntitiesDlg</name>
+    <message>
+        <source>WRN_AT_LEAST_ONE</source>
+        <translation>At least one entity type should be chosen!</translation>
+    </message>
+</context>
 </TS>
SALOME Mesh module

Copyright © 2005–2024 Open CASCADE.
All rights reserved.
Legal Information