23080: [CEA 1497] Do not merge a middle node in quadratic with the extreme nodes...

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index 2b430cef3cb17358f1d664e95854fa99ba6b8287..45fef3733593638fdce486d31c4b204c347cfe4c 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -286,7 +286,7 @@
     </message>
     <message>
         <source>MEN_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>MEN_CREATE_GROUP</source>
@@ -396,6 +396,10 @@
         <source>MEN_EDGES</source>
         <translation>Edges</translation>
     </message>
+    <message>
+        <source>MEN_CHOOSE</source>
+        <translation>Choose...</translation>
+    </message>
     <message>
         <source>MEN_EDIT</source>
         <translation>Edit</translation>
@@ -470,15 +474,15 @@
     </message>
     <message>
         <source>TOP_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>MEN_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>STB_REORIENT_2D</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>TOP_FIND_ELEM</source>
@@ -788,6 +792,10 @@
         <source>MEN_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>MEN_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>MEN_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -928,6 +936,10 @@
         <source>MEN_SHADE</source>
         <translation>Shading</translation>
     </message>
+    <message>
+        <source>MEN_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>MEN_QUADRATIC_REPRESENT</source>
         <translation>2D Quadratic</translation>
@@ -1034,7 +1046,7 @@
     </message>
     <message>
         <source>MEN_UNDERLYING_ELEMS</source>
-        <translation>Group of underlying entities</translation>
+        <translation>Group based on nodes of other groups</translation>
     </message>
     <message>
         <source>MEN_UPDATE</source>
@@ -1119,8 +1131,13 @@ Please, select a mesh and try again</translation>
 Please enter a name of new group to be created or choose an existing one.</translation>
     </message>
     <message>
-        <source>MESH_STANDALONE_GRP_CHOSEN</source>
+        <source>MESH_GEOM_GRP_CHOSEN</source>
         <translation>Group on geometry is chosen: %1.
+Do you want to convert it to the standalone group?</translation>
+    </message>
+    <message>
+        <source>MESH_FILTER_GRP_CHOSEN</source>
+        <translation>Group on filter is chosen: %1.
 Do you want to convert it to the standalone group?</translation>
     </message>
     <message>
@@ -1217,6 +1234,14 @@ Please enter correct values and try again</translation>
         <source>SMESH_ADD_POLYGON_TITLE</source>
         <translation>Add Polygon</translation>
     </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON</source>
+        <translation>Add Quadratic polygon</translation>
+    </message>
+    <message>
+        <source>SMESH_ADD_QUADRATIC_POLYGON_TITLE</source>
+        <translation>Add Quadratic Polygon</translation>
+    </message>
     <message>
         <source>SMESH_ADD_PENTA</source>
         <translation>Add pentahedron</translation>
@@ -1283,7 +1308,7 @@ Please enter correct values and try again</translation>
     </message>
     <message>
         <source>SMESH_ADD_SUBMESH</source>
-        <translation>SubMesh Construction</translation>
+        <translation>Sub-mesh Construction</translation>
     </message>
     <message>
         <source>SMESH_ADD_TETRAS</source>
@@ -1321,10 +1346,6 @@ Please enter correct values and try again</translation>
         <source>SMESH_AUTO_DIM</source>
         <translation>Automatically define space dimension</translation>
     </message>
-    <message>
-        <source>SMESH_AUTOMATIC_PRESENTATION</source>
-        <translation>Random input ID</translation>
-    </message>
     <message>
         <source>SMESH_REQUIRED_GROUPS</source>
         <translation>Create groups of required entities</translation>
@@ -1421,10 +1442,6 @@ Please enter correct values and try again</translation>
         <source>SMESH_BUT_APPLY_AND_CLOSE</source>
         <translation>A&amp;pply and Close</translation>
     </message>
-    <message>
-        <source>SMESH_BUT_GET_NEXT_SHAPE</source>
-        <translation>Get next shape</translation>
-    </message>
     <message>
         <source>SMESH_BUT_REMOVE</source>
         <translation>&amp;Remove</translation>
@@ -1697,6 +1714,10 @@ Do you want to continue ?</translation>
         <source>SMESH_EXTRUSION_ALONG_VECTOR</source>
         <translation>Extrusion Along Vector</translation>
     </message>
+    <message>
+        <source>SMESH_EXTRUSION_BY_NORMAL</source>
+        <translation>Extrusion By Normal</translation>
+    </message>
     <message>
         <source>SMESH_FACE</source>
         <translation>Face</translation>
@@ -1805,7 +1826,7 @@ add the exported data to its contents?</translation>
     </message>
     <message>
         <source>SMESH_HYP_10</source>
-        <translation>Hypothesis and submesh dimensions mismatch</translation>
+        <translation>Hypothesis and sub-mesh dimensions mismatch</translation>
     </message>
     <message>
         <source>SMESH_HYP_11</source>
@@ -1830,7 +1851,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_HYP_4</source>
-        <translation>Submesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
+        <translation>Sub-mesh is ignored as there is another algorithm of upper dimension generating %1D elements</translation>
     </message>
     <message>
         <source>SMESH_HYP_5</source>
@@ -1853,20 +1874,20 @@ Check algorithm documentation for supported geometry</translation>
         <translation>Such dimention hypothesis is already assigned to the shape</translation>
     </message>
     <message>
-        <source>SMESH_ID_DIAGONAL</source>
-        <translation>Id Edges</translation>
+        <source>SMESH_ID_EDGES</source>
+        <translation>Edge IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_ELEMENTS</source>
-        <translation>Id Elements</translation>
+        <translation>Element IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_FACES</source>
-        <translation>Id Faces</translation>
+        <translation>Face IDs</translation>
     </message>
     <message>
         <source>SMESH_ID_NODES</source>
-        <translation>Id Nodes</translation>
+        <translation>Node IDs</translation>
     </message>
     <message>
         <source>SMESH_INCORRECT_INPUT</source>
@@ -1938,23 +1959,23 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnCompound</source>
-        <translation>SubMeshes On Compound</translation>
+        <translation>Sub-meshes On Compound</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnEdge</source>
-        <translation>SubMeshes On Edge</translation>
+        <translation>Sub-meshes On Edge</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnFace</source>
-        <translation>SubMeshes On Face</translation>
+        <translation>Sub-meshes On Face</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnSolid</source>
-        <translation>SubMeshes On Solid</translation>
+        <translation>Sub-meshes On Solid</translation>
     </message>
     <message>
         <source>SMESH_MEN_SubMeshesOnVertex</source>
-        <translation>SubMeshes On Vertex</translation>
+        <translation>Sub-meshes On Vertex</translation>
     </message>
     <message>
         <source>SMESH_AUTOMATIC</source>
@@ -2168,9 +2189,13 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_OBJECT_MESH</source>
         <translation>Mesh</translation>
     </message>
+    <message>
+        <source>SMESH_OBJECTS</source>
+        <translation>Objects</translation>
+    </message>
     <message>
         <source>SMESH_OBJECT_MESHorSUBMESH</source>
-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_OPERATION_FAILED</source>
@@ -2314,7 +2339,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>PREF_NUMBERING_ELEM</source>
-        <translation>Edges: Color</translation>
+        <translation>Elements: Color</translation>
     </message>
     <message>
         <source>PREF_NUMBERING_FONT</source>
@@ -2577,6 +2602,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_SEWING</source>
         <translation>Sewing</translation>
     </message>
+    <message>
+        <source>SMESH_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>SMESH_SMOOTHING</source>
         <translation>Smoothing</translation>
@@ -2587,11 +2616,11 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_SUBMESH</source>
-        <translation>SubMesh</translation>
+        <translation>Sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_SUBMESH_SELECTED</source>
-        <translation>%1 SubMeshes</translation>
+        <translation>%1 Sub-meshes</translation>
     </message>
     <message>
         <source>SMESH_SYMMETRY</source>
@@ -2914,7 +2943,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>STB_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>STB_CREATE_GROUP</source>
@@ -3212,6 +3241,10 @@ Use Display Entity menu command to show them.
         <source>STB_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>STB_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>STB_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -3324,6 +3357,10 @@ Use Display Entity menu command to show them.
         <source>STB_SHOW</source>
         <translation>Show</translation>
     </message>
+    <message>
+        <source>STB_SHOW_SCALAR_BAR</source>
+        <translation>Show Scalar Bar</translation>
+    </message>
     <message>
         <source>STB_SHRINK</source>
         <translation>Shrink</translation>
@@ -3398,7 +3435,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>STB_UNDERLYING_ELEMS</source>
-        <translation>Create groups of entities from existing groups of superior dimensions</translation>
+        <translation>Create groups of entities basing on nodes of other groups</translation>
     </message>
     <message>
         <source>STB_UPDATE</source>
@@ -3574,7 +3611,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>TOP_MESH_ORDER</source>
-        <translation>Change submesh priority</translation>
+        <translation>Change sub-mesh priority</translation>
     </message>
     <message>
         <source>TOP_CREATE_GROUP</source>
@@ -3864,6 +3901,10 @@ Use Display Entity menu command to show them.
         <source>TOP_POLYGON</source>
         <translation>Polygon</translation>
     </message>
+    <message>
+        <source>TOP_QUADRATIC_POLYGON</source>
+        <translation>Quadratic Polygon</translation>
+    </message>
     <message>
         <source>TOP_POLYHEDRON</source>
         <translation>Polyhedron</translation>
@@ -4050,7 +4091,7 @@ Use Display Entity menu command to show them.
     </message>
     <message>
         <source>TOP_UNDERLYING_ELEMS</source>
-        <translation>Create groups of entities from existing groups of superior dimensions</translation>
+        <translation>Create groups of entities basing on nodes of other groups</translation>
     </message>
     <message>
         <source>TOP_UPDATE</source>
@@ -4350,17 +4391,25 @@ Please, create VTK viewer and try again</translation>
         <translation>Display entity</translation>
     </message>
     <message>
-        <source>QUADRATIC_REPRESENT_MODE</source>
+        <source>QUADRATIC_REPRESENT_MODE_GROUP</source>
         <translation>Representation of the 2D quadratic elements</translation>
     </message>
+    <message>
+        <source>QUADRATIC_REPRESENT_MODE</source>
+        <translation>Default mode of the 2D quadratic elements</translation>
+    </message>
     <message>
         <source>MAX_ARC_ANGLE</source>
         <translation>Maximum angle</translation>
     </message>
     <message>
-        <source>PREF_DISPLAY_MODE</source>
+        <source>PREF_DISPLAY_MODE_GROUP</source>
         <translation>Display mode</translation>
     </message>
+    <message>
+        <source>PREF_DISPLAY_MODE</source>
+        <translation>Default display mode</translation>
+    </message>
     <message>
         <source>PREF_ELEMENTS</source>
         <translation>Elements</translation>
@@ -4571,7 +4620,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_COLOR_0D</source>
-        <translation>0D elements</translation>
+        <translation>0D element color</translation>
     </message>
     <message>
         <source>PREF_SIZE_0D</source>
@@ -4579,7 +4628,11 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>PREF_BALL_COLOR</source>
-        <translation>Balls</translation>
+        <translation>Ball color</translation>
+    </message>
+    <message>
+        <source>PREF_BALL_DIAMETER</source>
+        <translation>Default diameter of ball elements</translation>
     </message>
     <message>
         <source>PREF_BALL_SIZE</source>
@@ -4714,7 +4767,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>CREATE_COMMON_GROUPS</source>
-        <translation>Create common groups for initial meshes</translation>
+        <translation>Create groups from input objects</translation>
     </message>
     <message>
         <source>MERGE_NODES_AND_ELEMENTS</source>
@@ -4722,7 +4775,7 @@ Please, create VTK viewer and try again</translation>
     </message>
     <message>
         <source>MESHES</source>
-        <translation>Meshes</translation>
+        <translation>Meshes, sub-meshes, groups</translation>
     </message>
     <message>
         <source>PROCESSING_IDENTICAL_GROUPS</source>
@@ -4833,9 +4886,9 @@ Please, create VTK viewer and try again</translation>
     <name>SMESHGUI_PrecomputeOp</name>
     <message>
         <source>CLEAR_SUBMESH_QUESTION</source>
-        <translation>Temporary submeshes on the selected geometry
+        <translation>Temporary sub-meshes on the selected geometry
 were created during preview operation.
-Do you want to remove all these submeshes?</translation>
+Do you want to remove all these sub-meshes?</translation>
     </message>
     <message>
         <source>SMESH_WRN_NOTHING_PREVIEW</source>
@@ -4843,8 +4896,8 @@ Do you want to remove all these submeshes?</translation>
     </message>
     <message>
         <source>SMESH_REJECT_MESH_ORDER</source>
-        <translation>The submesh priority changed during preview operation.
-Do you want to restore original submesh priority?</translation>
+        <translation>The sub-mesh priority changed during preview operation.
+Do you want to restore original sub-mesh priority?</translation>
     </message>
 </context>
 <context>
@@ -4940,7 +4993,7 @@ Please verify validity of entered information</translation>
     </message>
     <message>
         <source>MESH_OR_SUBMESH</source>
-        <translation>Mesh or SubMesh</translation>
+        <translation>Mesh or Sub-mesh</translation>
     </message>
     <message>
         <source>PATTERN</source>
@@ -5047,6 +5100,10 @@ Please select a group and try again</translation>
         <source>EXCLUDE_GROUPS</source>
         <translation>Exclude Groups</translation>
     </message>
+    <message>
+        <source>SEPARATE_CORNERS_AND_MEDIUM</source>
+        <translation>No merge of corner and medium nodes</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_ExtrusionAlongPathDlg</name>
@@ -5104,7 +5161,7 @@ Please select a group and try again</translation>
     </message>
     <message>
         <source>SMESH_PATH_MESH</source>
-        <translation>Mesh or submesh</translation>
+        <translation>Mesh or sub-mesh</translation>
     </message>
     <message>
         <source>SMESH_PATH_SHAPE</source>
@@ -5145,6 +5202,14 @@ Please select a group and try again</translation>
         <source>EXTRUSION_ALONG_LINE</source>
         <translation>Extrusion along a line</translation>
     </message>
+    <message>
+        <source>BY_AVERAGE_NORMAL</source>
+        <translation>Along average normal</translation>
+    </message>
+    <message>
+        <source>USE_INPUT_ELEMS_ONLY</source>
+        <translation>Use only input elements</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_FilterDlg</name>
@@ -5155,7 +5220,7 @@ Please select valid object and try again</translation>
     </message>
     <message>
         <source>CURRENT_DIALOG</source>
-        <translation>Current Group</translation>
+        <translation>Current Dialog</translation>
     </message>
     <message>
         <source>EDGES_TLT</source>
@@ -5409,6 +5474,10 @@ Please check input data and try again</translation>
         <source>OVER_CONSTRAINED_FACE</source>
         <translation>Over-constrained faces</translation>
     </message>
+    <message>
+        <source>BELONG_TO_MESH_GROUP</source>
+        <translation>Belong to Mesh Group</translation>
+    </message>
     <message>
         <source>BELONG_TO_CYLINDER</source>
         <translation>Belong to Cylinder</translation>
@@ -5802,8 +5871,8 @@ Please specify non-empty name and try again</translation>
 Please specify them and try again</translation>
     </message>
     <message>
-        <source>NAME</source>
-        <translation>Name</translation>
+        <source>RESULT</source>
+        <translation>Result</translation>
     </message>
     <message>
         <source>OBJECT_1</source>
@@ -5815,7 +5884,7 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>RESULT_NAME</source>
-        <translation>Result name</translation>
+        <translation>Group name</translation>
     </message>
     <message>
         <source>TOOL_OBJECT</source>
@@ -5837,27 +5906,35 @@ Please specify them and try again</translation>
     <name>SMESHGUI_DimGroupDlg</name>
     <message>
         <source>CREATE_GROUP_OF_UNDERLYING_ELEMS</source>
-        <translation>Create group of underlying entities</translation>
+        <translation>Group based on nodes of other groups</translation>
     </message>
     <message>
         <source>ELEMENTS_TYPE</source>
         <translation>Elements type</translation>
     </message>
     <message>
-        <source>NODE</source>
-        <translation>Node</translation>
+        <source>UNDERLYING_ENTITIES_ONLY</source>
+        <translation>Include underlying entities only</translation>
     </message>
     <message>
-        <source>EDGE</source>
-        <translation>Edge</translation>
+        <source>NUMBER_OF_COMMON_NODES</source>
+        <translation>Number of common nodes</translation>
     </message>
     <message>
-        <source>FACE</source>
-        <translation>Face</translation>
+        <source>ALL</source>
+        <translation>All</translation>
     </message>
     <message>
-        <source>VOLUME</source>
-        <translation>Volume</translation>
+        <source>MAIN</source>
+        <translation>Main</translation>
+    </message>
+    <message>
+        <source>AT_LEAST_ONE</source>
+        <translation>At least one</translation>
+    </message>
+    <message>
+        <source>MAJORITY</source>
+        <translation>Majority</translation>
     </message>
 </context>
 <context>
@@ -6018,12 +6095,12 @@ Please specify them and try again</translation>
     </message>
     <message>
         <source>EDIT_SUBMESH_QUESTION</source>
-        <translation>A submesh on the selected geometry already exists.
- Do you want to edit this submesh?</translation>
+        <translation>A sub-mesh on the selected geometry already exists.
+ Do you want to edit this sub-mesh?</translation>
     </message>
     <message>
         <source>SUBMESH_NOT_ALLOWED</source>
-        <translation>No sense in creating a submesh ignored by global algorithm &quot;%1&quot;</translation>
+        <translation>No sense in creating a sub-mesh ignored by global algorithm &quot;%1&quot;</translation>
     </message>
     <message>
         <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
@@ -6092,7 +6169,7 @@ Please enter valid name and try again</translation>
     </message>
     <message>
         <source>NAME_OF_SUBMESH_IS_EMPTY</source>
-        <translation>Name of submesh is empty
+        <translation>Name of sub-mesh is empty
 Please enter valid name and try again</translation>
     </message>
     <message>
@@ -6399,8 +6476,8 @@ It is impossible to read point coordinates from file</translation>
         <translation>Preview</translation>
     </message>
     <message>
-        <source>REVOLUTION_1D</source>
-        <translation>Revolution of 1D elements</translation>
+        <source>REVOLUTION</source>
+        <translation>Revolution</translation>
     </message>
     <message>
         <source>REVOLUTION_2D</source>
@@ -6634,14 +6711,14 @@ It is impossible to read point coordinates from file</translation>
     <name>SMESHGUI_MeshOrderDlg</name>
     <message>
         <source>SMESH_MESHORDER_TITLE</source>
-        <translation>Order of submesh in meshing process</translation>
+        <translation>Order of sub-mesh in meshing process</translation>
     </message>
 </context>
 <context>
     <name>SMESHGUI_MeshOrderOp</name>
     <message>
         <source>SMESH_NO_CONCURENT_MESH</source>
-        <translation>No concurent submeshes detected</translation>
+        <translation>No concurent sub-meshes detected</translation>
     </message>
 </context>
 <context>
@@ -6783,7 +6860,7 @@ It is impossible to read point coordinates from file</translation>
     </message>
     <message>
         <source>GROUP_VOLUME_GROUPS</source>
-        <translation>Groups of volumes</translation>
+        <translation>Groups (faces or volumes)</translation>
     </message>
     <message>
         <source>CONSTRUCT_NEW_GROUP_NODES</source>
@@ -7094,6 +7171,10 @@ as they are of improper type:
         <source>GRAVITY_CENTER</source>
         <translation>Gravity Center</translation>
     </message>
+    <message>
+        <source>NORMAL_VECTOR</source>
+        <translation>Normal</translation>
+    </message>
     <message>
         <source>NODE</source>
         <translation>Node</translation>
@@ -7664,7 +7745,7 @@ as they are of improper type:
     <name>SMESHGUI_ReorientFacesDlg</name>
     <message>
         <source>CAPTION</source>
-        <translation>Reorient faces by vector</translation>
+        <translation>Reorient faces</translation>
     </message>
     <message>
         <source>REORIENT_FACES</source>
@@ -7694,6 +7775,14 @@ as they are of improper type:
         <source>ORIENTATION</source>
         <translation>Orientation</translation>
     </message>
+    <message>
+        <source>VOLUMES</source>
+        <translation>Volumes</translation>
+    </message>
+    <message>
+        <source>OUTSIDE_VOLUME_NORMAL</source>
+        <translation>Face normal outside volume</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_ReorientFacesOp</name>
@@ -7701,10 +7790,18 @@ as they are of improper type:
         <source>NO_OBJECT_SELECTED</source>
         <translation>No object selected</translation>
     </message>
+    <message>
+        <source>NO_VOLUME_OBJECT_SELECTED</source>
+        <translation>No volume object selected</translation>
+    </message>
     <message>
         <source>NO_FACES</source>
         <translation>Object includes no faces</translation>
     </message>
+    <message>
+        <source>NO_VOLUMES</source>
+        <translation>Volume object includes no volumes</translation>
+    </message>
     <message>
         <source>ZERO_SIZE_VECTOR</source>
         <translation>Zero size vector</translation>
@@ -7797,4 +7894,11 @@ as they are of improper type:
         <translation>Shrink coef:</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_DisplayEntitiesDlg</name>
+    <message>
+        <source>WRN_AT_LEAST_ONE</source>
+        <translation>At least one entity type should be chosen!</translation>
+    </message>
+</context>
 </TS>