imn/auto-reorder_of_nodes_ver2

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.ts

diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts
index c10c3bad0d066a6b6df8cd4ea16371104255f900..2b430cef3cb17358f1d664e95854fa99ba6b8287 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.ts
+++ b/src/SMESHGUI/SMESH_msg_en.ts
@@ -139,6 +139,10 @@
         <source>COMPERR_NO_MESH_ON_SHAPE</source>
         <translation>No mesh elements assigned to a Sub-shape</translation>
     </message>
+    <message>
+        <source>COMPERR_BAD_PARMETERS</source>
+        <translation>Invalid input parameters</translation>
+    </message>
     <message>
         <source>EDITERR_NO_MEDIUM_ON_GEOM</source>
         <translation>Some medium nodes not placed on geometry to avoid
@@ -712,6 +716,46 @@
         <source>TOP_MEASURE_BND_BOX</source>
         <translation>Bounding box</translation>
     </message>
+    <message>
+        <source>MEN_BASIC_PROPERTIES</source>
+        <translation>Basic Properties</translation>
+    </message>
+    <message>
+        <source>MEN_MEASURE_LENGTH</source>
+        <translation>Length</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_LENGTH</source>
+        <translation>Calculate sum of length of all 1D elements of the selected object(s)</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_LENGTH</source>
+        <translation>Length</translation>
+    </message>
+    <message>
+        <source>MEN_MEASURE_AREA</source>
+        <translation>Area</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_AREA</source>
+        <translation>Calculate sum of area of all 2D elements of the selected object(s)</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_AREA</source>
+        <translation>Area</translation>
+    </message>
+    <message>
+        <source>MEN_MEASURE_VOLUME</source>
+        <translation>Volume</translation>
+    </message>
+    <message>
+        <source>STB_MEASURE_VOLUME</source>
+        <translation>Calculate sum of volume of all 3D elements of the selected object(s)</translation>
+    </message>
+    <message>
+        <source>TOP_MEASURE_VOLUME</source>
+        <translation>Volume</translation>
+    </message>
     <message>
         <source>MEN_MOVE</source>
         <translation>Move Node</translation>
@@ -828,6 +872,10 @@
         <source>MEN_RESET</source>
         <translation>Reset</translation>
     </message>
+    <message>
+        <source>MEN_OVERALL_MESH_QUALITY</source>
+        <translation>Overall Mesh Quality</translation>
+    </message>
     <message>
         <source>MEN_DISTRIBUTION_CTRL</source>
         <translation>Distribution</translation>
@@ -946,7 +994,7 @@
     </message>
     <message>
         <source>MEN_DUPLICATE_NODES</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes or/and Elements</translation>
     </message>
     <message>
         <source>MEN_TRANSF</source>
@@ -1018,15 +1066,15 @@
     </message>
     <message>
         <source>MEN_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>TOP_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>STB_SPLIT_TO_TETRA</source>
-        <translation>Split into Tetrahedra</translation>
+        <translation>Split Volumes</translation>
     </message>
     <message>
         <source>MESHERS_FILE_CANT_OPEN</source>
@@ -1269,6 +1317,14 @@ Please enter correct values and try again</translation>
         <source>SMESH_AUTO_GROUPS</source>
         <translation>Automatically create groups</translation>
     </message>
+    <message>
+        <source>SMESH_AUTO_DIM</source>
+        <translation>Automatically define space dimension</translation>
+    </message>
+    <message>
+        <source>SMESH_AUTOMATIC_PRESENTATION</source>
+        <translation>Random input ID</translation>
+    </message>
     <message>
         <source>SMESH_REQUIRED_GROUPS</source>
         <translation>Create groups of required entities</translation>
@@ -1365,6 +1421,10 @@ Please enter correct values and try again</translation>
         <source>SMESH_BUT_APPLY_AND_CLOSE</source>
         <translation>A&amp;pply and Close</translation>
     </message>
+    <message>
+        <source>SMESH_BUT_GET_NEXT_SHAPE</source>
+        <translation>Get next shape</translation>
+    </message>
     <message>
         <source>SMESH_BUT_REMOVE</source>
         <translation>&amp;Remove</translation>
@@ -1641,6 +1701,10 @@ Do you want to continue ?</translation>
         <source>SMESH_FACE</source>
         <translation>Face</translation>
     </message>
+    <message>
+        <source>SMESH_FACES</source>
+        <translation>Faces</translation>
+    </message>
     <message>
         <source>SMESH_FEATUREANGLE</source>
         <translation>Feature Angle</translation>
@@ -1984,6 +2048,10 @@ Check algorithm documentation for supported geometry</translation>
         <source>SMESH_MESHINFO_ORDER2</source>
         <translation>Quadratic</translation>
     </message>
+    <message>
+        <source>SMESH_MESHINFO_ORDER3</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
     <message>
         <source>SMESH_MESHINFO_HEXAPRISM</source>
         <translation>Hexagonal prisms</translation>
@@ -2244,7 +2312,7 @@ Check algorithm documentation for supported geometry</translation>
         <source>PREF_NUMBERING_NODE</source>
         <translation>Nodes: Color</translation>
     </message>
-     <message>
+    <message>
         <source>PREF_NUMBERING_ELEM</source>
         <translation>Edges: Color</translation>
     </message>
@@ -2555,7 +2623,7 @@ Check algorithm documentation for supported geometry</translation>
     </message>
     <message>
         <source>SMESH_DUPLICATE_TITLE</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes and/or Elements</translation>
     </message>
     <message>
         <source>SMESH_SCALE</source>
@@ -2647,6 +2715,10 @@ Consider saving your work before application crash</translation>
         <source>SMESH_VOLUME</source>
         <translation>Volume</translation>
     </message>
+    <message>
+        <source>SMESH_VOLUMES</source>
+        <translation>Volumes</translation>
+    </message>
     <message>
         <source>SMESH_WARNING</source>
         <translation>Warning</translation>
@@ -2709,8 +2781,15 @@ Consider saving your work before application crash</translation>
     </message>
     <message>
         <source>SMESH_WRN_SIZE_LIMIT_EXCEEDED</source>
-        <translation>No automatic update of the presentation has been done: new mesh size (%1 elements) exceeds current size limit (%2 elements).
-Please check preferences of Mesh module.
+        <translation>No automatic update of the presentation has been done:
+New mesh size (%1 elements) exceeds current size limit of automatic update (%2 elements).
+</translation>
+    </message>
+    <message>
+        <source>SMESH_WRN_SIZE_INC_LIMIT_EXCEEDED</source>
+        <translation>New mesh size (%1 elements) exceeds current size limit of automatic update (%2 elements).
+The following elements are not shown: %3.
+Use Display Entity menu command to show them.
 </translation>
     </message>
     <message>
@@ -3283,7 +3362,7 @@ Please check preferences of Mesh module.
     </message>
     <message>
         <source>STB_DUPLICATE_NODES</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes or/and Elements</translation>
     </message>
     <message>
         <source>STB_TRANSP</source>
@@ -3350,12 +3429,44 @@ Please check preferences of Mesh module.
         <translation>Taper</translation>
     </message>
     <message>
-        <source>TB_ADD_REMOVE</source>
-        <translation>Add/Remove Toolbar</translation>
+        <source>TB_ADD</source>
+        <translation>Add Element Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_ADDNON</source>
+        <translation>Add Non Linear Element Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_REM</source>
+        <translation>Remove Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_RENUMBER</source>
+        <translation>Renumbering Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_TRANSFORM</source>
+        <translation>Transformation Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL0D</source>
+        <translation>Node Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL1D</source>
+        <translation>Edge Controls Toolbar</translation>
     </message>
     <message>
-        <source>TB_CTRL</source>
-        <translation>Controls Toolbar</translation>
+        <source>TB_CTRL2D</source>
+        <translation>Face Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_CTRL3D</source>
+        <translation>Volume Controls Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_MEASUREM</source>
+        <translation>Measurements Toolbar</translation>
     </message>
     <message>
         <source>TB_DISP_MODE</source>
@@ -3369,6 +3480,18 @@ Please check preferences of Mesh module.
         <source>TB_MESH</source>
         <translation>Mesh Toolbar</translation>
     </message>
+    <message>
+        <source>TB_GROUP</source>
+        <translation>Group Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_INFO</source>
+        <translation>Information Toolbar</translation>
+    </message>
+    <message>
+        <source>TB_ADD1D</source>
+        <translation>Mesh Toolbar</translation>
+    </message>
     <message>
         <source>TB_MODIFY</source>
         <translation>Modification Toolbar</translation>
@@ -3891,7 +4014,7 @@ Please check preferences of Mesh module.
     </message>
     <message>
         <source>TOP_DUPLICATE_NODES</source>
-        <translation>Duplicate Nodes</translation>
+        <translation>Duplicate Nodes or/and Elements</translation>
     </message>
     <message>
         <source>TOP_TRANSP</source>
@@ -4092,20 +4215,47 @@ Input value precision can be adjusted using
         <translation>Selected object has been used to create another one.
 It can&apos;t be deleted </translation>
     </message>
+    <message>
+        <source>SMESH_FREERAM</source>
+        <translation>Free RAM</translation>
+    </message>
+    <message>
+        <source>SMESH_GIGABYTE</source>
+        <translation>%1 GB</translation>
+    </message>
+    <message>
+        <source>MEN_SORT_CHILD_ITEMS</source>
+        <translation>Sort children</translation>
+    </message>
+    <message>
+        <source>STB_SORT_CHILD_ITEMS</source>
+        <translation>Sort child items</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_FieldSelectorWdg</name>
+    <message>
+        <source>FIELDS_TO_EXPORT</source>
+        <translation>Export Fields</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Dialog</name>
     <message>
         <source>DLG_MESH</source>
-        <translation>meshes</translation>
+        <translation>mesh(s)</translation>
     </message>
     <message>
         <source>DLG_HYPO</source>
-        <translation>hypotheses</translation>
+        <translation>hypothesis(s)</translation>
     </message>
     <message>
         <source>DLG_ALGO</source>
-        <translation>algorithms</translation>
+        <translation>algorithm(s)</translation>
+    </message>
+    <message>
+        <source>DLG_GEOM</source>
+        <translation>object(s)</translation>
     </message>
 </context>
 <context>
@@ -4151,6 +4301,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_UPDATE_LIMIT_NOLIMIT</source>
         <translation>No limit</translation>
     </message>
+    <message>
+        <source>PREF_INCREMENTAL_LIMIT</source>
+        <translation>Incremental limit check</translation>
+    </message>
     <message>
         <source>PREF_BACKFACE</source>
         <translation>Back surface color</translation>
@@ -4174,7 +4328,7 @@ Please, create VTK viewer and try again</translation>
     <message>
         <source>PREF_PRE_SELECTION</source>
         <translation>Pre-selection color</translation>
-    </message>    
+    </message>
     <message>
         <source>PREF_COLOR</source>
         <translation>Color</translation>
@@ -4219,6 +4373,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_FILL</source>
         <translation>Surface color</translation>
     </message>
+    <message>
+        <source>PREF_PREVIEW_COLOR</source>
+        <translation>Preview color</translation>
+    </message>
     <message>
         <source>PREF_NOTIFY_MODE</source>
         <translation>Show a computation result notification</translation>
@@ -4263,10 +4421,18 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_DUMP_ADD_INFO</source>
         <translation>Dump additional information</translation>
     </message>
+    <message>
+        <source>PREF_DUMP_CTRL_INFO</source>
+        <translation>Dump controls information</translation>
+    </message>
     <message>
         <source>PREF_GPP_NODES_LIMIT</source>
         <translation>Automatic nodes compute limit</translation>
     </message>
+    <message>
+        <source>PREF_CTRL_LIMIT</source>
+        <translation>Automatic controls compute limit</translation>
+    </message>
     <message>
         <source>SMESH_PREF_GROUP_PRECISION</source>
         <translation>Input fields precision</translation>
@@ -4419,6 +4585,10 @@ Please, create VTK viewer and try again</translation>
         <source>PREF_BALL_SIZE</source>
         <translation>Size of ball elements</translation>
     </message>
+    <message>
+        <source>PREF_BALL_SCALE</source>
+        <translation>Scale factor of ball elements</translation>
+    </message>
     <message>
         <source>PREF_WIDTH</source>
         <translation>Line width</translation>
@@ -4438,6 +4608,10 @@ Please, create VTK viewer and try again</translation>
         <source>ALLOW_ELEM_LIST_MODIF</source>
         <translation>Enable manual edition</translation>
     </message>
+    <message>
+        <source>SELECT_ALL</source>
+        <translation>Select All</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Add0DElemsOnAllNodesDlg</name>
@@ -4617,6 +4791,21 @@ Please, create VTK viewer and try again</translation>
         <translation>Bad Mesh to Group</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_ComputeDlg_QThreadQDialog</name>
+    <message>
+        <source>CANCEL</source>
+        <translation>Cancel</translation>
+    </message>
+    <message>
+        <source>CANCELING</source>
+        <translation>Canceling...</translation>
+    </message>
+    <message>
+        <source>TITLE</source>
+        <translation>Compute</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_PrecomputeDlg</name>
     <message>
@@ -4680,11 +4869,11 @@ Do you want to restore original submesh priority?</translation>
         <source>RADIOBTN_2</source>
         <translation>Convert to quadratic</translation>
     </message>
-      <message>
+    <message>
         <source>RADIOBTN_3</source>
         <translation>Convert to bi-quadratic</translation>
-      </message>
-      <message>
+    </message>
+    <message>
         <source>NON_CONFORM_WARNING</source>
         <translation>Warning: mesh can become non-conformal</translation>
     </message>
@@ -5256,10 +5445,10 @@ Please check input data and try again</translation>
         <source>CONNECTED_ELEMS</source>
         <translation>Elements of a domain</translation>
     </message>
-  <message>
-    <source>NUMBEROFNODESINELEMENT</source>
-    <translation>Number Of Nodes In Element</translation>
-  </message>
+    <message>
+        <source>NUMBEROFNODESINELEMENT</source>
+        <translation>Number Of Nodes In Element</translation>
+    </message>
     <message>
         <source>COPY_FROM</source>
         <translation>Copy from...</translation>
@@ -5637,13 +5826,6 @@ Please specify them and try again</translation>
         <translation>Union of two groups</translation>
     </message>
 </context>
-<context>
-    <name>SMESHGUI_GroupDlg</name>
-    <message>
-        <source>SELECT_ALL</source>
-        <translation>Select All</translation>
-    </message>
-</context>
 <context>
     <name>SMESHGUI_UnionGroupsDlg</name>
     <message>
@@ -5819,6 +6001,10 @@ Please specify them and try again</translation>
         <source>MESH</source>
         <translation>Mesh</translation>
     </message>
+    <message>
+        <source>MESH_TYPE</source>
+        <translation>Mesh type</translation>
+    </message>
     <message>
         <source>NAME</source>
         <translation>Name</translation>
@@ -5840,8 +6026,14 @@ Please specify them and try again</translation>
         <translation>No sense in creating a submesh ignored by global algorithm &quot;%1&quot;</translation>
     </message>
     <message>
-        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED</source>
-        <translation>Geometry object is not defined
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_MESH</source>
+        <translation>Geometry object is not defined.
+Do you want to create an empty mesh 
+without algorithms and hypotheses? </translation>
+    </message>
+    <message>
+        <source>GEOMETRY_OBJECT_IS_NOT_DEFINED_SUBMESH</source>
+        <translation>Geometry object is not defined.
 Please specify it and try again</translation>
     </message>
     <message>
@@ -5873,6 +6065,26 @@ Please specify it and try again</translation>
         <source>MESH_IS_NULL</source>
         <translation>Mesh is null</translation>
     </message>
+    <message>
+        <source>MT_ANY</source>
+        <translation>Any</translation>
+    </message>
+    <message>
+        <source>MT_HEXAHEDRAL</source>
+        <translation>Hexahedral</translation>
+    </message>
+    <message>
+        <source>MT_TETRAHEDRAL</source>
+        <translation>Tetrahedral</translation>
+    </message>
+    <message>
+        <source>MT_TRIANGULAR</source>
+        <translation>Triangular</translation>
+    </message>
+    <message>
+        <source>MT_QUADRILATERAL</source>
+        <translation>Quadrilateral</translation>
+    </message>
     <message>
         <source>NAME_OF_MESH_IS_EMPTY</source>
         <translation>Name of mesh is empty
@@ -5888,6 +6100,14 @@ Please enter valid name and try again</translation>
         <translation>There is no object for editing. Please
 select mesh or sub-mesh and try again</translation>
     </message>
+    <message>
+        <source>CONCURRENT_SUBMESH_APPEARS</source>
+        <translation> 
+The assigned algorithm has the same priority as one assigned to an 
+adjacent sub-mesh, hence it&apos;s undefined which algorithm to use for
+meshing boundary shared by two sub-meshes. Would you like to set
+the order of sub-mesh computation? </translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MeshPatternDlg</name>
@@ -6050,6 +6270,14 @@ It is impossible to read point coordinates from file</translation>
         <source>NONE</source>
         <translation>&lt;None&gt;</translation>
     </message>
+    <message>
+        <source>DEFAULT</source>
+        <translation>&lt;Default&gt;</translation>
+    </message>
+    <message>
+        <source>SELECT</source>
+        <translation>&lt;Select&gt;</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_MultiEditDlg</name>
@@ -6095,10 +6323,10 @@ It is impossible to read point coordinates from file</translation>
     </message>
 </context>
 <context>
-    <name>SMESHGUI_CuttingIntoTetraDlg</name>
+    <name>SMESHGUI_SplitVolumesDlg</name>
     <message>
         <source>CAPTION</source>
-        <translation>Splitting volumes into tetrahedra</translation>
+        <translation>Splitting volumes</translation>
     </message>
     <message>
         <source>SPLIT_METHOD</source>
@@ -6116,6 +6344,34 @@ It is impossible to read point coordinates from file</translation>
         <source>SPLIT_HEX_TO_24_TETRA</source>
         <translation>Into 24 tetrahedra</translation>
     </message>
+    <message>
+        <source>SPLIT_HEX_TO_2_PRISMS</source>
+        <translation>Into 2 prisms</translation>
+    </message>
+    <message>
+        <source>SPLIT_HEX_TO_4_PRISMS</source>
+        <translation>Into 4 Prisms</translation>
+    </message>
+    <message>
+        <source>TARGET_ELEM_TYPE</source>
+        <translation>Target element type</translation>
+    </message>
+    <message>
+        <source>FACET_TO_SPLIT</source>
+        <translation>Facet to split</translation>
+    </message>
+    <message>
+        <source>START_POINT</source>
+        <translation>Hexa location</translation>
+    </message>
+    <message>
+        <source>FACET_NORMAL</source>
+        <translation>Facet normal</translation>
+    </message>
+    <message>
+        <source>ALL_DOMAINS</source>
+        <translation>All domains</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_PrecisionDlg</name>
@@ -6394,6 +6650,10 @@ It is impossible to read point coordinates from file</translation>
         <source>CLIP_PLANES</source>
         <translation>Clipping planes</translation>
     </message>
+    <message>
+        <source>IS_OPENGL_CLIPPING</source>
+        <translation>OpenGL clipping</translation>
+    </message>
     <message>
         <source>MESHES_SUBMESHES_GROUPS</source>
         <translation>Meshes, sub-meshes and groups</translation>
@@ -6454,6 +6714,30 @@ It is impossible to read point coordinates from file</translation>
         <source>NO_PLANES</source>
         <translation>No planes</translation>
     </message>
+    <message>
+        <source>ABSOLUTE</source>
+        <translation>Absolute</translation>
+    </message>
+    <message>
+        <source>RELATIVE</source>
+        <translation>Relative</translation>
+    </message>
+    <message>
+        <source>BASE_POINT</source>
+        <translation>Base point</translation>
+    </message>
+    <message>
+        <source>DIRECTION</source>
+        <translation>Direction</translation>
+    </message>
+    <message>
+        <source>RESET</source>
+        <translation>Reset</translation>
+    </message>
+    <message>
+        <source>INVERT</source>
+        <translation>Invert</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_DuplicateNodesDlg</name>
@@ -6463,7 +6747,7 @@ It is impossible to read point coordinates from file</translation>
     </message>
     <message>
         <source>DUPLICATION_WITHOUT_ELEMS</source>
-        <translation>Without duplication of border elements</translation>
+        <translation>Duplicate nodes only</translation>
     </message>
     <message>
         <source>GROUP_NODES_TO_DUPLICATE</source>
@@ -6475,7 +6759,15 @@ It is impossible to read point coordinates from file</translation>
     </message>
     <message>
         <source>DUPLICATION_WITH_ELEMS</source>
-        <translation>With duplication of border elements</translation>
+        <translation>Duplicate nodes and border elements</translation>
+    </message>
+    <message>
+        <source>DUPLICATION_ONLY_ELEMS</source>
+        <translation>Duplicate elements only</translation>
+    </message>
+    <message>
+        <source>DUPLICATION_GROUP_BOUNDARY</source>
+        <translation>Duplicate nodes on group boundaries</translation>
     </message>
     <message>
         <source>GROUP_ELEMS_TO_DUPLICATE</source>
@@ -6489,6 +6781,10 @@ It is impossible to read point coordinates from file</translation>
         <source>GROUP_ELEMS_TO_REPLACE</source>
         <translation>Group of elements to replace nodes with new ones</translation>
     </message>
+    <message>
+        <source>GROUP_VOLUME_GROUPS</source>
+        <translation>Groups of volumes</translation>
+    </message>
     <message>
         <source>CONSTRUCT_NEW_GROUP_NODES</source>
         <translation>Construct group with newly created nodes</translation>
@@ -6497,6 +6793,14 @@ It is impossible to read point coordinates from file</translation>
         <source>CONSTRUCT_NEW_GROUP_ELEMENTS</source>
         <translation>Construct group with newly created elements</translation>
     </message>
+    <message>
+        <source>CREATE_JOINT_ELEMENTS</source>
+        <translation>Create joint elements</translation>
+    </message>
+    <message>
+        <source>ON_ALL_BOUNDARIES</source>
+        <translation>On all boundaries</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_Make2DFrom3DDlg</name>
@@ -6571,7 +6875,7 @@ as they are of improper type:
     </message>
     <message>
         <source>SMESH_NOT_ONLY_GROUPS</source>
-        <translation>Can't process meshes and groups at once</translation>
+        <translation>Can&apos;t process meshes and groups at once</translation>
     </message>
     <message>
         <source>SMESH_ERR_NO_3D_ELEMENTS</source>
@@ -6624,6 +6928,10 @@ as they are of improper type:
         <source>QUADRATIC_LAB</source>
         <translation>Quadratic</translation>
     </message>
+    <message>
+        <source>BI_QUADRATIC_LAB</source>
+        <translation>Bi-Quadratic</translation>
+    </message>
     <message>
         <source>0D_LAB</source>
         <translation>0D:</translation>
@@ -6739,6 +7047,10 @@ as they are of improper type:
         <source>ADDITIONAL_INFO</source>
         <translation>Additional Info</translation>
     </message>
+    <message>
+        <source>CTRL_INFO</source>
+        <translation>Quality Info</translation>
+    </message>
     <message>
         <source>NODE_MODE</source>
         <translation>Node</translation>
@@ -6930,8 +7242,8 @@ as they are of improper type:
 <context>
     <name>SMESHGUI_TreeElemInfo</name>
     <message>
-      <source>SHOW_ITEM_INFO</source>
-      <translation>Show info</translation>
+        <source>SHOW_ITEM_INFO</source>
+        <translation>Show info</translation>
     </message>
     <message>
         <source>PROPERTY</source>
@@ -7105,6 +7417,96 @@ as they are of improper type:
         <translation>Vertex</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_CtrlInfo</name>
+    <message>
+        <source>CTRL_INFO</source>
+        <translation>Quality information</translation>
+    </message>
+    <message>
+        <source>NAME_LAB</source>
+        <translation>Name:</translation>
+    </message>
+    <message>
+        <source>VALUE</source>
+        <translation>Value</translation>
+    </message>
+    <message>
+        <source>BUT_COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+    <message>
+        <source>NODES_INFO</source>
+        <translation>Nodes Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_FREE_NODES</source>
+        <translation>Number of the free nodes</translation>
+    </message>
+    <message>
+        <source>DOUBLE_NODES_TOLERANCE</source>
+        <translation>Double nodes tolerance</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_NODES</source>
+        <translation>Number of the double nodes</translation>
+    </message>
+    <message>
+        <source>EDGES_INFO</source>
+        <translation>Edges Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_EDGES</source>
+        <translation>Number of the double edges</translation>
+    </message>
+    <message>
+        <source>FACES_INFO</source>
+        <translation>Faces Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_FACES</source>
+        <translation>Number of the double faces</translation>
+    </message>
+    <message>
+        <source>ASPECT_RATIO_HISTOGRAM</source>
+        <translation>Aspect Ratio histogram</translation>
+    </message>
+    <message>
+        <source>VOLUMES_INFO</source>
+        <translation>Volumes Information:</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_DOUBLE_VOLUMES</source>
+        <translation>Number of the double volumes</translation>
+    </message>
+    <message>
+        <source>NUMBER_OF_THE_OVER_CONSTRAINED</source>
+        <translation>Number of the over-constrained</translation>
+    </message>
+    <message>
+        <source>ASPECT_RATIO_3D_HISTOGRAM</source>
+        <translation>Aspect Ratio 3D histogram</translation>
+    </message>
+</context>
+<context>
+    <name>SMESHGUI_CtrlInfoDlg</name>
+    <message>
+        <source>CTRL_INFO</source>
+        <translation>Quality Info</translation>
+    </message>
+    <message>
+        <source>BUT_DUMP_MESH</source>
+        <translation>&amp;Dump</translation>
+    </message>
+    <message>
+        <source>TEXT_FILES</source>
+        <translation>Text files (*.txt)</translation>
+    </message>
+    <message>
+        <source>SAVE_INFO</source>
+        <translation>Save info</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_MinDistance</name>
     <message>
@@ -7144,6 +7546,33 @@ as they are of improper type:
         <translation>Distance</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_BasicProperties</name>
+    <message>
+        <source>PROPERTY</source>
+        <translation>Property</translation>
+    </message>
+    <message>
+        <source>LENGTH</source>
+        <translation>Length</translation>
+    </message>
+    <message>
+        <source>AREA</source>
+        <translation>Area</translation>
+    </message>
+    <message>
+        <source>VOLUME</source>
+        <translation>Volume</translation>
+    </message>
+    <message>
+        <source>SOURCE_MESH_SUBMESH_GROUP</source>
+        <translation>Source (mesh, sub-mesh or group)</translation>
+    </message>
+    <message>
+        <source>COMPUTE</source>
+        <translation>Compute</translation>
+    </message>
+</context>
 <context>
     <name>SMESHGUI_CopyMeshDlg</name>
     <message>
@@ -7173,6 +7602,10 @@ as they are of improper type:
         <source>BND_BOX</source>
         <translation>Bounding Box</translation>
     </message>
+    <message>
+        <source>BASIC_PROPERTIES</source>
+        <translation>Basic Properties</translation>
+    </message>
 </context>
 <context>
     <name>SMESHGUI_BoundingBox</name>
@@ -7352,7 +7785,7 @@ as they are of improper type:
         <translation>Size:</translation>
     </message>
     <message>
-        <source>ORIENTATION_SCALE</source>
+        <source>SCALE_FACTOR</source>
         <translation>Scale:</translation>
     </message>
     <message>