'Extrusion Along Path' dialog box : rearrange widgets

[modules/smesh.git] / src / SMESHGUI / SMESH_msg_en.po

diff --git a/src/SMESHGUI/SMESH_msg_en.po b/src/SMESHGUI/SMESH_msg_en.po
index c1187f34d3f8cf8eddbbebe1a0d0ce403fed3dfa..ddfd0b3e2ed10da1b742491fca637a556e87fcb5 100644 (file)
--- a/src/SMESHGUI/SMESH_msg_en.po
+++ b/src/SMESHGUI/SMESH_msg_en.po
@@ -722,6 +722,10 @@ msgstr "Rotation"
 msgid "SMESH_MESHINFO_TITLE"
 msgstr "Mesh Infos"
 
+#Standard Mesh Infos
+msgid "SMESH_STANDARD_MESHINFO_TITLE"
+msgstr "Standard Mesh Infos"
+
 #Mesh Infos
 msgid "SMESH_MESHINFO_NAME"
 msgstr "Name"
@@ -790,6 +794,10 @@ msgstr "Heterogenous"
 msgid "SMESH_BAD_SELECTION"
 msgstr "No valid selection"
 
+#Information :
+msgid "SMESH_INFORMATION"
+msgstr "Information"
+
 # --------- Create hypotheses/algorithms ---------
 
 msgid "SMESH_CREATE_HYPOTHESES"
@@ -953,12 +961,21 @@ msgstr "Free borders"
 msgid "SMESHGUI_FilterTable::MULTI_BORDERS"
 msgstr "Borders at multi-connections"
 
+#msgid "SMESHGUI_FilterTable::MULTI2D_BORDERS"
+#msgstr "Borders at multi-connections 2D"
+
 msgid "SMESHGUI_FilterTable::LENGTH"
 msgstr "Length"
 
+#msgid "SMESHGUI_FilterTable::LENGTH2D"
+#msgstr "Length2D"
+
 msgid "SMESHGUI_FilterTable::ASPECT_RATIO"
 msgstr "Aspect ratio"
 
+msgid "SMESHGUI_FilterTable::ASPECT_RATIO_3D"
+msgstr "Aspect ratio 3D"
+
 msgid "SMESHGUI_FilterTable::WARPING"
 msgstr "Warping"
 
@@ -1031,6 +1048,9 @@ msgstr "Belong to Plane"
 msgid "SMESHGUI_FilterTable::BELONG_TO_CYLINDER"
 msgstr "Belong to Cylinder"
 
+msgid "SMESHGUI_FilterTable::LYING_ON_GEOM"
+msgstr "Lying on Geom"
+
 # -------------- SMESHGUI_FilterDlg --------------
 msgid "SMESHGUI_FilterDlg::TLT"
 msgstr "Selection filter"
@@ -1084,11 +1104,17 @@ msgstr "This command is available in VTK viewer only\nPlease, create VTK viewer
 msgid "LENGTH_EDGES"
 msgstr "Length"
 
+msgid "LENGTH2D_EDGES"
+msgstr "Length 2D"
+
 msgid "FREE_BORDERS"
-msgstr "Free borders"
+msgstr "Free Borders"
 
 msgid "MULTI_BORDERS"
-msgstr "Borders at multi-connections"
+msgstr "Borders at Multi-Connections"
+
+msgid "MULTI2D_BORDERS"
+msgstr "Borders at Multi-Connections 2D"
 
 msgid "AREA_ELEMENTS"
 msgstr "Area"
@@ -1099,6 +1125,9 @@ msgstr "Taper"
 msgid "ASPECTRATIO_ELEMENTS"
 msgstr "Aspect Ratio"
 
+msgid "ASPECTRATIO_3D_ELEMENTS"
+msgstr "Aspect Ratio 3D"
+
 msgid "MINIMUMANGLE_ELEMENTS"
 msgstr "Minimum Angle"
 
@@ -1406,7 +1435,6 @@ msgstr "Centroidal"
 msgid "SMESHGUI_ExtrusionDlg::EXTRUSION_ALONG_LINE"
 msgstr "Extrusion along a line"
 
-
 msgid "SMESHGUI_ExtrusionDlg::EXTRUSION_1D"
 msgstr "Extrusion of 1D elements"
 
@@ -1415,6 +1443,59 @@ msgstr "Extrusion of 2D elements"
 
 #----------------------------------------------------
 
+msgid "SMESHGUI_ExtrusionAlongPathDlg::EXTRUSION_ALONG_PATH"
+msgstr "Extrusion along a path"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::EXTRUSION_1D"
+msgstr "Extrusion of 1D elements"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::EXTRUSION_2D"
+msgstr "Extrusion of 2D elements"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_PATH"
+msgstr "Path"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_PATH_MESH"
+msgstr "Mesh"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_PATH_SHAPE"
+msgstr "Shape (edge or wire)"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_PATH_START"
+msgstr "Start point"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_USE_ANGLES"
+msgstr "Use Angles"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_ANGLES"
+msgstr "Rotation Angles"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_USE_BASE_POINT"
+msgstr "Use Base Point"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::SMESH_BASE_POINT"
+msgstr "Base Point"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::NO_ELEMENTS_SELECTED"
+msgstr "No mesh elements are selected for extrusion"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::SELECTED_PATH_IS_NOT_EDGE"
+msgstr "Path mesh should be of edge type"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::BAD_SHAPE_TYPE"
+msgstr "The shape selected for the path is not edge"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::EXTR_BAD_STARTING_NODE"
+msgstr "Wrong path starting node"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::WRONG_ANGLES_NUMBER"
+msgstr "The number of angles should correspond to the number of path nodes"
+
+msgid "SMESHGUI_ExtrusionAlongPathDlg::CANT_GET_TANGENT"
+msgstr "Can't get tangent for one of the path nodes"
+
+#----------------------------------------------------
+
 msgid "SMESHGUI_RevolutionDlg::REVOLUTION_AROUND_AXIS"
 msgstr "Revolution around an axis"
 
@@ -1597,6 +1678,20 @@ msgstr "It is impossible to load pattern\nThere are no elements in it"
 msgid "SMESHGUI_MeshPatternDlg::ERR_READ_BAD_KEY_POINT"
 msgstr "It is impossible to load pattern\nKey-point not on a boundary"
 
+msgid "SMESHGUI_MeshPatternDlg::REFINE"
+msgstr "Refine selected mesh elements"
+
+msgid "SMESHGUI_MeshPatternDlg::NODE_1"
+msgstr "Node 1"
+
+msgid "SMESHGUI_MeshPatternDlg::NODE_2"
+msgstr "Node 2"
+
+msgid "SMESHGUI_MeshPatternDlg::MESH_FACES"
+msgstr "Mesh faces"
+
+msgid "SMESHGUI_MeshPatternDlg::MESH_VOLUMES"
+msgstr "Mesh volumes"
 
 #----------------------------------------------------
 
@@ -1665,8 +1760,8 @@ msgstr "Number of digits after point"
 msgid "SMESHGUI_PrecisionDlg::NOT_USE"
 msgstr "Do not use"
 
-
-
+msgid "NON_SMESH_OBJECTS_SELECTED"
+msgstr "There are objects selected which do not belong to %1 component."