myToCreate( theToCreate ),
myIsMesh( theIsMesh ),
myDlg( 0 ),
- myShapeByMeshDlg( 0 )
+ myShapeByMeshOp( 0 )
{
if ( GeometryGUI::GetGeomGen()->_is_nil() )// check that GEOM_Gen exists
GeometryGUI::InitGeomGen();
QString aMess;
if ( !isValid( aMess ) )
{
+ dlg()->show();
if ( aMess != "" )
SUIT_MessageBox::warn1( myDlg,
tr( "SMESH_WRN_WARNING" ), aMess, tr( "SMESH_BUT_OK" ) );
for ( int i = SMESH::DIM_1D; i <= SMESH::DIM_3D; i++ )
{
connect( myDlg->tab( i ), SIGNAL( createHyp( const int, const int ) ),
- this, SLOT( onCreateHyp( const int, const int) ) );
+ this, SLOT( onCreateHyp( const int, const int ) ) );
connect( myDlg->tab( i ), SIGNAL( editHyp( const int, const int ) ),
- this, SLOT( onEditHyp( const int, const int) ) );
+ this, SLOT( onEditHyp( const int, const int ) ) );
+ connect( myDlg->tab( i ), SIGNAL( selectAlgo( const int ) ),
+ this, SLOT( onAlgoSelected( const int ) ) );
}
connect( myDlg, SIGNAL( hypoSet( const QString& )), SLOT( onHypoSet( const QString& )));
connect( myDlg, SIGNAL( geomSelectionByMesh( bool )), SLOT( onGeomSelectionByMesh( bool )));
+
+ if ( myToCreate )
+ if ( myIsMesh ) myHelpFileName = "/files/constructing_meshes.htm";
+ else myHelpFileName = "/files/constructing_submeshes.htm";
+ else myHelpFileName = "files/reassigning_hypotheses_and_algorithms.htm";
}
SMESHGUI_SelectionOp::startOperation();
- // iterate through dimensions and get available and existing algoritms and hypotheses,
+ // iterate through dimensions and get available algoritms,
// set them to the dialog
- int i, j;
_PTR(SComponent) aFather = SMESH::GetActiveStudyDocument()->FindComponent( "SMESH" );
- for ( i = SMESH::DIM_1D; i <= SMESH::DIM_3D; i++ )
+ for ( int i = SMESH::DIM_1D; i <= SMESH::DIM_3D; i++ )
{
SMESHGUI_MeshTab* aTab = myDlg->tab( i );
- QStringList anAvailable, anExisting;
- for ( j = Algo; j <= AddHyp; j++ )
- {
- availableHyps( i, j, anAvailable );
- existingHyps( i, j, aFather, anExisting, myExistingHyps[ i ][ j ] );
-
- aTab->setAvailableHyps( j, anAvailable );
- aTab->setExistingHyps( j, anExisting );
- }
+ QStringList hypList;
+ // clear available hypotheses
+ aTab->setAvailableHyps( MainHyp, hypList );
+ aTab->setAvailableHyps( AddHyp, hypList );
+ aTab->setExistingHyps( MainHyp, hypList );
+ aTab->setExistingHyps( AddHyp, hypList );
+ myExistingHyps[ i ][ MainHyp ].clear();
+ myExistingHyps[ i ][ AddHyp ].clear();
+ // set algos
+ availableHyps( i, Algo, hypList, myAvailableHypData[i][Algo] );
+ aTab->setAvailableHyps( Algo, hypList );
}
if ( myToCreate )
{
myDlg->setHypoSets( SMESH::GetHypothesesSets() );
+ myDlg->setCurrentTab( SMESH::DIM_3D );
+ myDlg->show();
+
selectionDone();
- myDlg->setCurrentTab( SMESH::DIM_1D );
- myDlg->show();
+ myIgnoreAlgoSelection = false;
}
//================================================================================
case GEOM::COMPOUND: tag = SUBMESH_ON_COMPOUND_TAG; break;
default:;
}
+ _PTR(GenericAttribute) anAttr;
_PTR(SObject) aSubmeshRoot;
_PTR(Study) aStudy = SMESH::GetActiveStudyDocument();
if ( pMesh->FindSubObject( tag, aSubmeshRoot ) )
for (; smIter->More(); smIter->Next() )
{
_PTR(SObject) aSmObj = smIter->Value();
+ if ( ! aSmObj->FindAttribute( anAttr, "AttributeIOR" ))
+ continue;
_PTR(ChildIterator) anIter1 = aStudy->NewChildIterator(aSmObj);
for (; anIter1->More(); anIter1->Next()) {
_PTR(SObject) pGeom2 = anIter1->Value();
//================================================================================
void SMESHGUI_MeshOp::selectionDone()
{
- if ( myShapeByMeshDlg && myShapeByMeshDlg->isShown() )
+ if ( !dlg()->isShown() )
return;
SMESHGUI_SelectionOp::selectionDone();
}
myDlg->setMaxHypoDim( shapeDim );
+
if ( !myToCreate ) // edition: read hypotheses
{
QString anObjEntry = myDlg->selectedObject( SMESHGUI_MeshDlg::Obj );
}
else
{
- selectObject( _PTR(SObject)() );
myDlg->selectObject( "", SMESHGUI_MeshDlg::Geom, "" );
+ selectObject( _PTR(SObject)() );
+ selectionDone();
}
}
SMESH::SMESH_Mesh_var mesh = SMESH::SObjectToInterface<SMESH::SMESH_Mesh>( pMesh );
if ( !mesh->_is_nil() )
enable = ( shapeDim > 1 ) && ( mesh->NbEdges() > 0 );
- }
+ }
myDlg->setGeomPopupEnabled( enable );
}
}
return true;
}
+//================================================================================
+/*!
+ * \brief check compatibility of the algorithm and another algorithm or hypothesis
+ * \param theAlgoData - algorithm data
+ * \param theHypData - hypothesis data
+ * \param theHypType - hypothesis type
+ * \param theHypTypeName - hypothesis type name, must be provided if 2-nd arg is not algo
+ * \retval bool - check result
+ */
+//================================================================================
+
+static bool isCompatible(const HypothesisData* theAlgoData,
+ const HypothesisData* theHypData,
+ const int theHypType)
+{
+ if ( !theAlgoData )
+ return true;
+
+ if ( theHypType == SMESHGUI_MeshOp::Algo )
+ return SMESH::IsCompatibleAlgorithm( theAlgoData, theHypData );
+
+ bool isOptional;
+ return ( SMESH::IsAvailableHypothesis( theAlgoData, theHypData->TypeName, isOptional ));
+}
+
//================================================================================
/*!
* \brief Gets available hypotheses or algorithms
* \param theHypType - specifies whether algorims or hypotheses or additional ones
* are retrieved (possible values are in HypType enumeration)
* \param theHyps - Output list of hypotheses' names
+ * \param theAlgoData - to select hypos able to be used by this algo (optional)
*
* Gets available hypotheses or algorithm in accordance with input parameters
*/
//================================================================================
-void SMESHGUI_MeshOp::availableHyps( const int theDim,
- const int theHypType,
- QStringList& theHyps ) const
+void SMESHGUI_MeshOp::availableHyps( const int theDim,
+ const int theHypType,
+ QStringList& theHyps,
+ THypDataList& theDataList,
+ HypothesisData* theAlgoData ) const
{
+ theDataList.clear();
theHyps.clear();
- QStringList aHypTypeNameList = SMESH::GetAvailableHypotheses(
- theHypType == Algo , theDim, theHypType == AddHyp );
+ bool isAlgo = ( theHypType == Algo );
+ bool isAux = ( theHypType == AddHyp );
+ QStringList aHypTypeNameList = SMESH::GetAvailableHypotheses( isAlgo, theDim, isAux );
+
QStringList::const_iterator anIter;
for ( anIter = aHypTypeNameList.begin(); anIter != aHypTypeNameList.end(); ++anIter )
{
HypothesisData* aData = SMESH::GetHypothesisData( *anIter );
- theHyps.append( aData->Label );
+ if ( isCompatible ( theAlgoData, aData, theHypType )) {
+ theDataList.append( aData );
+ theHyps.append( aData->Label );
+ }
}
}
* \param theHypType - specifies whether algorims or hypotheses or additional ones
* are retrieved (possible values are in HypType enumeration)
* \param theFather - start object for finding ( may be component, mesh, or sub-mesh )
+ * \param theDataList - output list of hypotheses data
* \param theHyps - output list of names.
* \param theHypVars - output list of variables.
+ * \param theAlgoData - to select hypos able to be used by this algo (optional)
*
* Gets existing (i.e. already created) hypotheses or algorithm in accordance with
* input parameters
const int theHypType,
_PTR(SObject) theFather,
QStringList& theHyps,
- QValueList<SMESH::SMESH_Hypothesis_var>& theHypVars )
+ QValueList<SMESH::SMESH_Hypothesis_var>& theHypVars,
+ HypothesisData* theAlgoData)
{
// Clear hypoheses list
theHyps.clear();
if ( !theFather )
return;
+ const bool isAux = ( theHypType == AddHyp );
+
_PTR(SObject) aHypRoot;
_PTR(GenericAttribute) anAttr;
_PTR(AttributeName) aName;
QString aHypType( aHypVar->GetName() );
HypothesisData* aData = SMESH::GetHypothesisData( aHypType );
if ( ( theDim == -1 || aData->Dim.contains( theDim ) ) &&
- ( theHypType == AddHyp ) == aData->IsAux )
+ ( isCompatible ( theAlgoData, aData, theHypType )) &&
+ ( isAux == aData->IsAux ))
{
+ //theDataList.append( aData );
theHyps.append( aName->Value().c_str() );
theHypVars.append( aHypVar );
}
//================================================================================
/*!
- * \brief Calls plugin methods for hypothesis creation
- * \param theHypType - specifies whether main hypotheses or additional ones
- * are created
+ * \Brief Returns tab dimention
+ * \param tab - the tab in the dlg
+ * \param dlg - my dialogue
+ * \retval int - dimention
+ */
+//================================================================================
+
+static int getTabDim (const QObject* tab, SMESHGUI_MeshDlg* dlg )
+{
+ int aDim = -1;
+ for (int i = SMESH::DIM_1D; i <= SMESH::DIM_3D; i++)
+ if (tab == dlg->tab(i))
+ aDim = i;
+ return aDim;
+}
+
+//================================================================================
+/*!
+ * \brief Create hypothesis
+ * \param theHypType - hypothesis category (main or additional)
* \param theIndex - index of type of hypothesis to be cerated
*
- * Speicfies dimension of hypothesis to be created (using sender() method), specifies
- * its type and calls plugin methods for hypothesis creation
+ * Specifies dimension of hypothesis to be created (using sender() method),
+ * specifies its type and calls method for hypothesis creation
*/
//================================================================================
void SMESHGUI_MeshOp::onCreateHyp( const int theHypType, const int theIndex )
{
- // Speicfies dimension of hypothesis to be created
- const QObject* aSender = sender();
- int aDim = -1;
- for ( int i = SMESH::DIM_1D; i <= SMESH::DIM_3D; i++ )
- if ( aSender == myDlg->tab( i ) )
- aDim = i;
- if ( aDim == -1 )
+ // Specifies dimension of hypothesis to be created
+ int aDim = getTabDim( sender(), myDlg );
+ if (aDim == -1)
return;
- // Speicfies type of hypothesis to be created
- QStringList aHypTypeNames = SMESH::GetAvailableHypotheses( false , aDim, theHypType == AddHyp );
- if ( theIndex < 0 || theIndex >= aHypTypeNames.count() )
+ // Specifies type of hypothesis to be created
+ THypDataList& dataList = myAvailableHypData[ aDim ][ theHypType ];
+ if (theIndex < 0 || theIndex >= dataList.count())
return;
+ QString aHypTypeName = dataList[ theIndex ]->TypeName;
- QString aHypTypeName = aHypTypeNames[ theIndex ];
- HypothesisData* aData = SMESH::GetHypothesisData( aHypTypeName.latin1() );
- if ( aData == 0 )
+ // Create hypothesis
+ createHypothesis(aDim, theHypType, aHypTypeName);
+}
+
+//================================================================================
+/*!
+ * Create hypothesis and update dialog.
+ * \param theDim - dimension of hypothesis to be created
+ * \param theType - hypothesis category (algorithm, hypothesis, additional hypothesis)
+ * \param theTypeName - specifies hypothesis to be created
+ */
+//================================================================================
+void SMESHGUI_MeshOp::createHypothesis (const int theDim,
+ const int theType,
+ const QString& theTypeName)
+{
+ HypothesisData* aData = SMESH::GetHypothesisData(theTypeName.latin1());
+ if (!aData)
return;
- QString aClientLibName = aData->ClientLibName;
- QStringList anOldHyps;
- _PTR(SComponent) aFather = SMESH::GetActiveStudyDocument()->FindComponent( "SMESH" );
- existingHyps( aDim, theHypType, aFather, anOldHyps, myExistingHyps[ aDim ][ theHypType ] );
+ // existing hypos
+ int nbHyp = myExistingHyps[theDim][theType].count();
- if ( aClientLibName == "" )
- {
+ QString aClientLibName = aData->ClientLibName;
+ if (aClientLibName == "") {
// Call hypothesis creation server method (without GUI)
- QString aHypName = aData->Label;
- SMESH::CreateHypothesis( aHypTypeName, aHypName, false );
- }
- else
- {
+ SMESH::CreateHypothesis(theTypeName, aData->Label, false);
+ } else {
// Get hypotheses creator client (GUI)
- SMESHGUI_GenericHypothesisCreator* aCreator = SMESH::GetHypothesisCreator( aHypTypeName );
+ SMESHGUI_GenericHypothesisCreator* aCreator = SMESH::GetHypothesisCreator(theTypeName);
// Create hypothesis
- if ( aCreator )
- {
+ if (aCreator) {
// When create or edit a submesh, try to initialize a new hypothesis
// with values used to mesh a subshape
SMESH::SMESH_Hypothesis_var initParamHyp =
- getInitParamsHypothesis( aHypTypeName, aData->ServerLibName );
-
- if ( initParamHyp->_is_nil() )
- aCreator->create( false, myDlg );
- else
- aCreator->create( initParamHyp, myDlg );
- }
- else
- {
- SMESH::CreateHypothesis( aHypTypeName, aData->Label, false );
+ getInitParamsHypothesis(theTypeName, aData->ServerLibName);
+ aCreator->create(initParamHyp, myDlg);
+ } else {
+ SMESH::CreateHypothesis(theTypeName, aData->Label, false);
}
}
+ _PTR(SComponent) aFather = SMESH::GetActiveStudyDocument()->FindComponent("SMESH");
+
+ HypothesisData* algoData = hypData( theDim, Algo, currentHyp( theDim, Algo ));
QStringList aNewHyps;
- aFather = SMESH::GetActiveStudyDocument()->FindComponent( "SMESH" );
- existingHyps( aDim, theHypType, aFather, aNewHyps, myExistingHyps[ aDim ][ theHypType ] );
- if ( aNewHyps.count() > anOldHyps.count() )
- {
- for ( int i = anOldHyps.count(); i < aNewHyps.count(); i++ )
- myDlg->tab( aDim )->addHyp( theHypType, aNewHyps[ i ] );
+ existingHyps(theDim, theType, aFather, aNewHyps, myExistingHyps[theDim][theType], algoData);
+ if (aNewHyps.count() > nbHyp) {
+ for (int i = nbHyp; i < aNewHyps.count(); i++)
+ myDlg->tab(theDim)->addHyp(theType, aNewHyps[i]);
}
}
void SMESHGUI_MeshOp::onEditHyp( const int theHypType, const int theIndex )
{
// Speicfies dimension of hypothesis to be created
- const QObject* aSender = sender();
- int aDim = -1;
- for ( int i = SMESH::DIM_1D; i <= SMESH::DIM_3D; i++ )
- if ( aSender == myDlg->tab( i ) )
- aDim = i;
- if ( aDim == -1 )
+ int aDim = getTabDim( sender(), myDlg );
+ if (aDim == -1)
return;
QValueList<SMESH::SMESH_Hypothesis_var> aList = myExistingHyps[ aDim ][ theHypType ];
- SMESH::SMESH_Hypothesis_var aHyp = aList[ theIndex - 1 ];
+ if ( theIndex < 0 || theIndex >= aList.count() )
+ return;
+ SMESH::SMESH_Hypothesis_var aHyp = aList[ theIndex ];
if ( aHyp->_is_nil() )
return;
//================================================================================
/*!
- * \brief Creates and selects hypothesis of hypotheses set
- * \param theSetName - The name of hypotheses set
+ * \brief access to hypothesis data
+ * \param theDim - hyp dimension
+ * \param theHypType - hyp type (Algo,MainHyp or AddHyp)
+ * \param theIndex - index in the list
+ * \retval HypothesisData* - result data, may be 0
*/
//================================================================================
-void SMESHGUI_MeshOp::onHypoSet( const QString& theSetName )
+HypothesisData* SMESHGUI_MeshOp::hypData( const int theDim,
+ const int theHypType,
+ const int theIndex)
{
- HypothesesSet* aHypoSet = SMESH::GetHypothesesSet( theSetName );
- if ( !aHypoSet ) return;
+ if ( theDim > -1 && theDim < 3 &&
+ theHypType > -1 && theHypType < NbHypTypes &&
+ theIndex > -1 && theIndex < myAvailableHypData[ theDim ][ theHypType ].count() )
+ return myAvailableHypData[ theDim ][ theHypType ][ theIndex ];
+ return 0;
+}
+
+//================================================================================
+/*!
+ * \brief Set available algos and hypos according to the selected algorithm
+ * \param theIndex - algorithm index
+ */
+//================================================================================
+
+void SMESHGUI_MeshOp::onAlgoSelected( const int theIndex,
+ const int theDim )
+{
+ if ( myIgnoreAlgoSelection )
+ return;
- for ( int aHypType = Algo; aHypType < AddHyp; aHypType++ )
+ int aDim = theDim < 0 ? getTabDim( sender(), myDlg ): theDim;
+ if (aDim == -1)
+ return;
+
+ // find highest available dimension, all algos of this dimension are available for choice
+ int aTopDim = -1;
+ for (int i = SMESH::DIM_1D; i <= SMESH::DIM_3D; i++)
+ if (isAccessibleDim( i ))
+ aTopDim = i;
+ if (aTopDim == -1)
+ return;
+
+ const bool isSubmesh = ( myToCreate ? !myIsMesh : myDlg->isObjectShown( SMESHGUI_MeshDlg::Mesh ));
+
+ HypothesisData* algoData = hypData( aDim, Algo, theIndex );
+ HypothesisData* algoByDim[3];
+ algoByDim[ aDim ] = algoData;
+
+ QStringList anAvailable;
+ if ( !algoData ) { // all algos becomes available
+ availableHyps( aDim, Algo, anAvailable, myAvailableHypData[ aDim ][ Algo ]);
+ myDlg->tab( aDim )->setAvailableHyps( Algo, anAvailable );
+ }
+
+ // check that algorithms of other dimentions are compatible with
+ // the selected one
+
+ // 2 loops: backward and forward from algo dimension
+ for ( int forward = false; forward <= true; ++forward )
{
- bool isAlgo = (aHypType == Algo);
+ int dim = aDim + 1, lastDim = SMESH::DIM_3D, dir = 1;
+ if ( !forward ) {
+ dim = aDim - 1; lastDim = SMESH::DIM_1D; dir = -1;
+ }
+ HypothesisData* prevAlgo = algoData;
+ bool noCompatible = false;
+ for ( ; dim * dir <= lastDim * dir ; dim += dir )
+ {
+ if ( !isAccessibleDim( dim ))
+ continue;
+ if ( noCompatible ) { // the selected algo has no compatible ones
+ anAvailable.clear();
+ myDlg->tab( dim )->setAvailableHyps( Algo, anAvailable );
+ myAvailableHypData[dim][Algo].clear();
+ algoByDim[ dim ] = 0;
+ continue;
+ }
+ // get currently selected algo
+ int algoIndex = currentHyp( dim, Algo );
+ HypothesisData* curAlgo = hypData( dim, Algo, algoIndex );
+ if ( curAlgo ) { // some algo selected
+ if ( !isCompatible( prevAlgo, curAlgo, Algo ))
+ curAlgo = 0;
+ }
+ // set new available algoritms
+ availableHyps( dim, Algo, anAvailable, myAvailableHypData[dim][Algo], prevAlgo );
+ HypothesisData* soleCompatible = 0;
+ if ( anAvailable.count() == 1 )
+ soleCompatible = myAvailableHypData[dim][Algo][0];
+ if ( dim == aTopDim && prevAlgo ) // all available algoritms should be selectable any way
+ availableHyps( dim, Algo, anAvailable, myAvailableHypData[dim][Algo], 0 );
+ myDlg->tab( dim )->setAvailableHyps( Algo, anAvailable );
+ noCompatible = anAvailable.isEmpty();
+
+ // restore previously selected algo
+ algoIndex = myAvailableHypData[dim][Algo].findIndex( curAlgo );
+ if ( !isSubmesh && algoIndex < 0 && soleCompatible )
+ // select the sole compatible algo
+ algoIndex = myAvailableHypData[dim][Algo].findIndex( soleCompatible );
+ setCurrentHyp( dim, Algo, algoIndex );
+
+ // remember current algo
+ prevAlgo = algoByDim[ dim ] = hypData( dim, Algo, algoIndex );
+ }
+ }
- // clear all hyps
- for ( int dim = SMESH::DIM_1D; dim <= SMESH::DIM_3D; dim++ )
- setCurrentHyp( dim, aHypType, -1 );
+ // set hypotheses corresponding to the found algoritms
- // set hyps from the set
-
- QStringList* aHypoList = isAlgo ? & aHypoSet->AlgoList : & aHypoSet->HypoList;
- for ( int i = 0, n = aHypoList->count(); i < n; i++ )
+ _PTR(SObject) pObj = SMESH::GetActiveStudyDocument()->FindComponent("SMESH");
+
+ for ( int dim = SMESH::DIM_1D; dim <= SMESH::DIM_3D; dim++ )
+ {
+ if ( !isAccessibleDim( dim ))
+ continue;
+ for ( int type = MainHyp; type < NbHypTypes; type++ )
{
+ myAvailableHypData[ dim ][ type ].clear();
+ QStringList anAvailable, anExisting;
+
+ HypothesisData* curAlgo = algoByDim[ dim ];
+ int hypIndex = currentHyp( dim, type );
+
+ SMESH::SMESH_Hypothesis_var curHyp;
+ if ( hypIndex >= 0 && hypIndex < myExistingHyps[ dim ][ type ].count() )
+ curHyp = myExistingHyps[ dim ][ type ][ hypIndex ];
+
+ if ( !myToCreate && !curAlgo && !curHyp->_is_nil() ) { // edition, algo not selected
+ // try to find algo by selected hypothesis in order to keep it selected
+ bool algoDeselectedByUser = ( theDim < 0 && aDim == dim );
+ QString curHypType = curHyp->GetName();
+ if ( !algoDeselectedByUser &&
+ myObjHyps[ dim ][ type ].count() > 0 &&
+ curHypType == myObjHyps[ dim ][ type ][ 0 ]->GetName())
+ {
+ HypothesisData* hypData = SMESH::GetHypothesisData( curHyp->GetName() );
+ for ( int i = 0 ; i < myAvailableHypData[ dim ][ Algo ].count(); ++i ) {
+ curAlgo = myAvailableHypData[ dim ][ Algo ][ i ];
+ if ( curAlgo && hypData && isCompatible( curAlgo, hypData, type ))
+ break;
+ else
+ curAlgo = 0;
+ }
+ }
+ }
+ // get hyps compatible with curAlgo
+ if ( curAlgo )
+ {
+ // check if a selected hyp is compatible with the curAlgo
+ if ( !curHyp->_is_nil() ) {
+ HypothesisData* hypData = SMESH::GetHypothesisData( curHyp->GetName() );
+ if ( !isCompatible( curAlgo, hypData, type ))
+ curHyp = SMESH::SMESH_Hypothesis::_nil();
+ }
+ existingHyps( dim, type, pObj, anExisting, myExistingHyps[ dim ][ type ], curAlgo);
+ availableHyps( dim, type, anAvailable, myAvailableHypData[ dim ][ type ], curAlgo);
+ }
+ // set list of hypotheses
+ myDlg->tab( dim )->setAvailableHyps( type, anAvailable );
+ myDlg->tab( dim )->setExistingHyps( type, anExisting );
+
+ // set current existing hypothesis
+ if ( !curHyp->_is_nil() && !anExisting.isEmpty() )
+ hypIndex = this->find( curHyp, myExistingHyps[ dim ][ type ]);
+ else
+ hypIndex = -1;
+ if ( !isSubmesh && hypIndex < 0 && anExisting.count() == 1 ) {
+ // none is yet selected => select the sole existing if it is not optional
+ QString hypTypeName = myExistingHyps[ dim ][ type ][ 0 ]->GetName();
+ bool isOptional = true;
+ if ( algoByDim[ dim ] &&
+ SMESH::IsAvailableHypothesis( algoByDim[ dim ], hypTypeName, isOptional ) &&
+ !isOptional )
+ hypIndex = 0;
+ }
+ setCurrentHyp( dim, type, hypIndex );
+ }
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Creates and selects hypothesis of hypotheses set
+ * \param theSetName - The name of hypotheses set
+ */
+//================================================================================
+void SMESHGUI_MeshOp::onHypoSet( const QString& theSetName )
+{
+ HypothesesSet* aHypoSet = SMESH::GetHypothesesSet(theSetName);
+ if (!aHypoSet) return;
+
+ // clear all hyps
+ for (int dim = SMESH::DIM_1D; dim <= SMESH::DIM_3D; dim++) {
+ setCurrentHyp(dim, Algo, -1);
+ setCurrentHyp(dim, AddHyp, -1);
+ setCurrentHyp(dim, MainHyp, -1);
+ }
+
+ for (int aHypType = Algo; aHypType < AddHyp; aHypType++) {
+ bool isAlgo = (aHypType == Algo);
+
+ // set hyps from the set
+ QStringList* aHypoList = isAlgo ? &aHypoSet->AlgoList : &aHypoSet->HypoList;
+ for (int i = 0, n = aHypoList->count(); i < n; i++) {
const QString& aHypoTypeName = (*aHypoList)[ i ];
- HypothesisData* aHypData = SMESH::GetHypothesisData( aHypoTypeName );
- if ( !aHypData )
+ HypothesisData* aHypData = SMESH::GetHypothesisData(aHypoTypeName);
+ if (!aHypData)
continue;
int aDim = aHypData->Dim[0];
// create or/and set
- int index = -1;
- if ( isAlgo )
- {
- QStringList aHypTypeNameList = SMESH::GetAvailableHypotheses( isAlgo, aDim );
- index = aHypTypeNameList.findIndex( aHypoTypeName );
- if ( index < 0 ) continue;
- setCurrentHyp ( aDim, aHypType, index );
- }
- else
- {
- // try to find an existing hypo
- QValueList<SMESH::SMESH_Hypothesis_var> & aList = myExistingHyps[ aDim ][ aHypType ];
- int /*iHyp = 0,*/ nbHyp = aList.count();
-// for ( ; iHyp < nbHyp; ++iHyp )
-// {
-// SMESH::SMESH_Hypothesis_var aHyp = aList[ iHyp ];
-// if ( !aHyp->_is_nil() && aHypoTypeName == aHyp->GetName() ) {
-// index = iHyp;
-// break;
-// }
-// }
- if ( index >= 0 ) // found
- {
- // select the found hypothesis
- setCurrentHyp ( aDim, aHypType, index );
+ if (isAlgo) {
+ int index = myAvailableHypData[aDim][Algo].findIndex( aHypData );
+ if ( index < 0 ) {
+ QStringList anAvailable;
+ availableHyps( aDim, Algo, anAvailable, myAvailableHypData[aDim][Algo] );
+ myDlg->tab( aDim )->setAvailableHyps( Algo, anAvailable );
+ index = myAvailableHypData[aDim][Algo].findIndex( aHypData );
}
- else
- {
- // create a hypothesis
- QString aClientLibName = aHypData->ClientLibName;
- if ( aClientLibName == "" ) {
- // Call hypothesis creation server method (without GUI)
- SMESH::CreateHypothesis( aHypoTypeName, aHypData->Label, isAlgo );
- }
- else {
- // Get hypotheses creator client (GUI)
- SMESHGUI_GenericHypothesisCreator* aCreator =
- SMESH::GetHypothesisCreator( aHypoTypeName );
- if ( aCreator )
- {
- // When create or edit a submesh, try to initialize a new hypothesis
- // with values used to mesh a subshape
- SMESH::SMESH_Hypothesis_var initParamHyp =
- getInitParamsHypothesis( aHypoTypeName, aHypData->ServerLibName );
- aCreator->create( initParamHyp, myDlg );
- }
- else
- {
- SMESH::CreateHypothesis( aHypoTypeName, aHypData->Label, isAlgo );
- }
- }
- QStringList aNewHyps;
- _PTR(SComponent) aFather = SMESH::GetActiveStudyDocument()->FindComponent( "SMESH" );
- existingHyps( aDim, aHypType, aFather, aNewHyps, aList );
- if ( aList.count() > nbHyp )
- {
- for ( int i = nbHyp; i < aNewHyps.count(); i++ )
- myDlg->tab( aDim )->addHyp( aHypType, aNewHyps[ i ] );
- }
+ setCurrentHyp( aDim, Algo, index );
+ onAlgoSelected( index, aDim );
+ }
+ else {
+ bool mainHyp = true;
+ int index = myAvailableHypData[aDim][MainHyp].findIndex( aHypData );
+ if ( index < 0 ) {
+ mainHyp = false;
+ index = myAvailableHypData[aDim][AddHyp].findIndex( aHypData );
}
+ if (index >= 0)
+ createHypothesis(aDim, mainHyp ? MainHyp : AddHyp, aHypoTypeName);
}
} // loop on hypos in the set
} // loop on algo/hypo
}
}
}
+
+ // deselect geometry: next submesh sould be created on other subshape
+ myDlg->selectObject( "", SMESHGUI_MeshDlg::Geom, "" );
+ selectObject( _PTR(SObject)() );
+ selectionDone();
+
return true;
}
* \retval bool - result
*/
//================================================================================
-bool SMESHGUI_MeshOp::isAccessibleDim( const int theDim) const
+bool SMESHGUI_MeshOp::isAccessibleDim( const int theDim ) const
{
return myDlg->tab( theDim )->isEnabled();
}
const int theHypType,
const int theIndex )
{
+ myIgnoreAlgoSelection = true;
myDlg->tab( theDim )->setCurrentHyp( theHypType, theIndex + 1 );
+ myIgnoreAlgoSelection = false;
}
//================================================================================
SMESH::SMESH_Hypothesis_var SMESHGUI_MeshOp::getAlgo( const int theDim )
{
SMESH::SMESH_Hypothesis_var anAlgoVar;
+
+ // get type of the selected algo
int aHypIndex = currentHyp( theDim, Algo );
- QStringList aHypTypeNameList = SMESH::GetAvailableHypotheses( true, theDim, false );
- if ( aHypIndex < 0 || aHypIndex >= aHypTypeNameList.count() )
+ THypDataList& dataList = myAvailableHypData[ theDim ][ Algo ];
+ if ( aHypIndex < 0 || aHypIndex >= dataList.count())
return anAlgoVar;
- QString aHypName = aHypTypeNameList[ aHypIndex ];
+ QString aHypName = dataList[ aHypIndex ]->TypeName;
+
+ // get existing algoritms
+ _PTR(SObject) pObj = SMESH::GetActiveStudyDocument()->FindComponent("SMESH");
+ QStringList tmp;
+ existingHyps( theDim, Algo, pObj, tmp, myExistingHyps[ theDim ][ Algo ]);
+
+ // look for anexisting algo of such a type
QValueList<SMESH::SMESH_Hypothesis_var>& aHypVarList = myExistingHyps[ theDim ][ Algo ];
QValueList<SMESH::SMESH_Hypothesis_var>::iterator anIter;
for ( anIter = aHypVarList.begin(); anIter != aHypVarList.end(); anIter++ )
break;
}
}
- if ( anAlgoVar->_is_nil() )
- {
+
+ if (anAlgoVar->_is_nil()) {
HypothesisData* aHypData = SMESH::GetHypothesisData( aHypName );
- if ( aHypData )
- {
+ if (aHypData) {
QString aClientLibName = aHypData->ClientLibName;
- if ( aClientLibName == "" )
- SMESH::CreateHypothesis( aHypName, aHypData->Label, true );
- else
- {
- SMESHGUI_GenericHypothesisCreator* aCreator =
- SMESH::GetHypothesisCreator( aHypName );
- if ( aCreator )
- aCreator->create( true, myDlg );
+ if (aClientLibName == "") {
+ // Call hypothesis creation server method (without GUI)
+ SMESH::CreateHypothesis(aHypName, aHypData->Label, true);
+ } else {
+ // Get hypotheses creator client (GUI)
+ SMESHGUI_GenericHypothesisCreator* aCreator = SMESH::GetHypothesisCreator(aHypName);
+
+ // Create algorithm
+ if (aCreator)
+ aCreator->create(true, myDlg);
+ else
+ SMESH::CreateHypothesis(aHypName, aHypData->Label, true);
}
QStringList tmpList;
_PTR(SComponent) aFather = SMESH::GetActiveStudyDocument()->FindComponent( "SMESH" );
}
// Get hypotheses and algorithms assigned to the mesh/sub-mesh
+ QStringList anExisting;
for ( int dim = SMESH::DIM_1D; dim <= SMESH::DIM_3D; dim++ )
{
// get algorithm
- QStringList anExisting;
- int aHypIndex = -1;
existingHyps( dim, Algo, pObj, anExisting, myObjHyps[ dim ][ Algo ] );
+ // find algo index among available ones
+ int aHypIndex = -1;
if ( myObjHyps[ dim ][ Algo ].count() > 0 )
{
SMESH::SMESH_Hypothesis_var aVar = myObjHyps[ dim ][ Algo ].first();
QString aHypTypeName = aVar->GetName();
-
- QStringList aHypTypeNameList = SMESH::GetAvailableHypotheses( true , dim, false );
- for ( int i = 0, n = aHypTypeNameList.count(); i < n; i++ )
- if ( aHypTypeName == aHypTypeNameList[ i ] )
- {
- aHypIndex = i;
- break;
- }
+ HypothesisData* algoData = SMESH::GetHypothesisData( aHypTypeName );
+ aHypIndex = myAvailableHypData[ dim ][ Algo ].findIndex ( algoData );
+// if ( aHypIndex < 0 && algoData ) {
+// // assigned algo is incompatible with other algorithms
+// myAvailableHypData[ dim ][ Algo ].push_back( algoData );
+// aHypIndex = myAvailableHypData[ dim ][ hypType ].count() - 1;
+// }
}
setCurrentHyp( dim, Algo, aHypIndex );
+ // set existing and available hypothesis according to the selected algo
+ onAlgoSelected( aHypIndex, dim );
+ }
- // get hypotheses
+ // get hypotheses
+ bool hypWithoutAlgo = false;
+ for ( int dim = SMESH::DIM_1D; dim <= SMESH::DIM_3D; dim++ )
+ {
for ( int hypType = MainHyp; hypType <= AddHyp; hypType++ )
{
// get hypotheses
existingHyps( dim, hypType, pObj, anExisting, myObjHyps[ dim ][ hypType ] );
- // find index of requered hypothesis among existing ones for this dimension
- // and hyp types
+ // find index of requered hypothesis among existing ones for this dimension and type
int aHypIndex = -1;
- if ( myObjHyps[ dim ][ hypType ].count() > 0 )
+ if ( myObjHyps[ dim ][ hypType ].count() > 0 ) {
aHypIndex = find( myObjHyps[ dim ][ hypType ].first(),
myExistingHyps[ dim ][ hypType ] );
+ if ( aHypIndex < 0 ) {
+ // assigned hypothesis is incompatible with the algorithm
+ if ( currentHyp( dim, Algo ) < 0 )
+ { // none algo selected; it is edition for sure, of submesh maybe
+ hypWithoutAlgo = true;
+ myExistingHyps[ dim ][ hypType ].push_back( myObjHyps[ dim ][ hypType ].first() );
+ aHypIndex = myExistingHyps[ dim ][ hypType ].count() - 1;
+ myDlg->tab( dim )->setExistingHyps( hypType, anExisting );
+ }
+ }
+ }
setCurrentHyp( dim, hypType, aHypIndex );
}
}
+ // make available other hyps of same type as one without algo
+ if ( hypWithoutAlgo )
+ onAlgoSelected( currentHyp( 0, Algo ), 0 );
}
//================================================================================
}
}
// remove old algorithm
- if ( toDelete )
- SMESH::RemoveHypothesisOrAlgorithmOnMesh
- ( pObj, myObjHyps[ dim ][ Algo ].first() );
+ if ( toDelete ) {
+ SMESH::RemoveHypothesisOrAlgorithmOnMesh ( pObj, myObjHyps[ dim ][ Algo ].first() );
+ myObjHyps[ dim ][ Algo ].clear();
+ }
// assign new algorithm
if ( toAdd ) {
if ( !aVar->_is_nil() )
SMESH::AddHypothesisOnSubMesh( aVar, anAlgoVar );
}
+ myObjHyps[ dim ][ Algo ].append( anAlgoVar );
}
// assign hypotheses
if ( aNewHypIndex != anOldHypIndex )
{
// remove old hypotheses
- if ( anOldHypIndex >= 0 )
+ if ( anOldHypIndex >= 0 ) {
SMESH::RemoveHypothesisOrAlgorithmOnMesh(
pObj, myExistingHyps[ dim ][ hypType ][ anOldHypIndex ] );
+ myObjHyps[ dim ][ hypType ].clear();
+ }
// assign new hypotheses
if ( aNewHypIndex != -1 )
void SMESHGUI_MeshOp::onGeomSelectionByMesh( bool theByMesh )
{
if ( theByMesh ) {
- if ( !myShapeByMeshDlg ) {
- myShapeByMeshDlg = new SMESHGUI_ShapeByMeshDlg( SMESHGUI::GetSMESHGUI(), "ShapeByMeshDlg");
- connect(myShapeByMeshDlg, SIGNAL(PublishShape()), SLOT(onPublishShapeByMeshDlg()));
- connect(myShapeByMeshDlg, SIGNAL(Close()), SLOT(onCloseShapeByMeshDlg()));
+ if ( !myShapeByMeshOp ) {
+ myShapeByMeshOp = new SMESHGUI_ShapeByMeshOp();
+ connect(myShapeByMeshOp, SIGNAL(committed(SUIT_Operation*)),
+ SLOT(onPublishShapeByMeshDlg(SUIT_Operation*)));
+ connect(myShapeByMeshOp, SIGNAL(aborted(SUIT_Operation*)),
+ SLOT(onCloseShapeByMeshDlg(SUIT_Operation*)));
}
- // set mesh object to dlg
+ // set mesh object to SMESHGUI_ShapeByMeshOp and start it
QString aMeshEntry = myDlg->selectedObject( SMESHGUI_MeshDlg::Mesh );
if ( _PTR(SObject) pMesh = studyDS()->FindObjectID( aMeshEntry.latin1() )) {
SMESH::SMESH_Mesh_var aMeshVar =
SMESH::SMESH_Mesh::_narrow( _CAST( SObject,pMesh )->GetObject() );
if ( !aMeshVar->_is_nil() ) {
- myDlg->hide();
- myDlg->activateObject( SMESHGUI_MeshDlg::Mesh );
- myShapeByMeshDlg->Init();
- myShapeByMeshDlg->SetMesh( aMeshVar );
- myShapeByMeshDlg->show();
+ myDlg->hide(); // stop processing selection
+ myShapeByMeshOp->setModule( getSMESHGUI() );
+ myShapeByMeshOp->setStudy( 0 ); // it's really necessary
+ myShapeByMeshOp->SetMesh( aMeshVar );
+ myShapeByMeshOp->start();
}
}
}
*/
//================================================================================
-void SMESHGUI_MeshOp::onPublishShapeByMeshDlg()
+void SMESHGUI_MeshOp::onPublishShapeByMeshDlg(SUIT_Operation* op)
{
- if ( myShapeByMeshDlg ) {
+ if ( myShapeByMeshOp == op ) {
+ myDlg->show();
// Select a found geometry object
- GEOM::GEOM_Object_var aGeomVar = myShapeByMeshDlg->GetShape();
+ GEOM::GEOM_Object_var aGeomVar = myShapeByMeshOp->GetShape();
if ( !aGeomVar->_is_nil() )
{
QString ID = aGeomVar->GetStudyEntry();
- if ( _PTR(SObject) aGeomSO = studyDS()->FindObjectID( ID )) {
- SMESH::SMESH_Mesh_ptr aMeshPtr = myShapeByMeshDlg->GetMesh();
- if ( !CORBA::is_nil( aMeshPtr )) {
- if (_PTR(SObject) aMeshSO = SMESH::FindSObject( aMeshPtr )) {
- myDlg->activateObject( SMESHGUI_MeshDlg::Mesh );
- myDlg->selectObject( aMeshSO->GetName(), SMESHGUI_MeshDlg::Mesh, aMeshSO->GetID() );
- }
- }
- myDlg->activateObject( SMESHGUI_MeshDlg::Geom );
+ if ( _PTR(SObject) aGeomSO = studyDS()->FindObjectID( ID.latin1() )) {
selectObject( aGeomSO );
- //selectionDone();
+ selectionDone();
}
}
- else {
- onCloseShapeByMeshDlg();
- }
}
- myDlg->show();
}
//================================================================================
*/
//================================================================================
-void SMESHGUI_MeshOp::onCloseShapeByMeshDlg()
+void SMESHGUI_MeshOp::onCloseShapeByMeshDlg(SUIT_Operation* op)
{
- if ( myDlg ) {
+ if ( myShapeByMeshOp == op && myDlg ) {
myDlg->show();
- myDlg->activateObject( SMESHGUI_MeshDlg::Geom );
- myDlg->selectObject( "", SMESHGUI_MeshDlg::Geom, "" );
}
}
