IMPs 00022364, 0022363, 0022362

[modules/smesh.git] / resources / StdMeshers.xml.in

diff --git a/resources/StdMeshers.xml.in b/resources/StdMeshers.xml.in
index c205f0355397bc542ea5a567849becbc7dcaf1e9..39307c745007b263334c44499999934d3b6f9ceb 100644 (file)
--- a/resources/StdMeshers.xml.in
+++ b/resources/StdMeshers.xml.in
@@ -55,6 +55,11 @@
                 icon-id  ="mesh_hypo_length.png"
                 dim      ="1"/>
 
+    <hypothesis type     ="GeometricProgression"
+                label-id ="Geometric Progression"
+                icon-id  ="mesh_hypo_length.png"
+                dim      ="1"/>
+
     <hypothesis type     ="FixedPoints1D"
                 label-id ="Fixed Points 1D"
                 icon-id  ="mesh_hypo_length.png"
@@ -75,10 +80,23 @@
                 icon-id  ="mesh_hypo_length.png"
                 dim      ="1"/>
 
+    <hypothesis type     ="Adaptive1D"
+                label-id ="Adaptive"
+                icon-id  ="mesh_hypo_length.png"
+                dim      ="1"/>
+
     <hypothesis type     ="Propagation"
                 label-id ="Propagation of 1D Hyp. on Opposite Edges"
                 icon-id  ="mesh_hypo_length.png"
                 dim      ="1"
+                context  ="LOCAL"
+                auxiliary="true"/>
+
+    <hypothesis type     ="PropagOfDistribution"
+                label-id ="Propagation of Node Distribution on Opposite Edges"
+                icon-id  ="mesh_hypo_length.png"
+                dim      ="1"
+                context  ="LOCAL"
                 auxiliary="true"/>
 
     <hypothesis type     ="AutomaticLength"
@@ -101,6 +119,7 @@
                 label-id ="Quadratic Mesh"
                 icon-id  ="mesh_algo_quad.png"
                 dim      ="1"
+                context  ="GLOBAL"
                 auxiliary="true"/>                
 
     <hypothesis type     ="MaxElementArea"
@@ -112,6 +131,7 @@
                 label-id ="Not Conform Mesh Allowed"
                 icon-id  ="mesh_hypo_length.png"
                 dim      ="1,2,3"
+                context  ="GLOBAL"
                 auxiliary="true"/>                
 
     <hypothesis type     ="MaxElementVolume"
@@ -184,6 +204,7 @@
     <hypothesis type     ="CartesianParameters3D"
                 label-id ="Body Fitting Parameters"
                 icon-id  ="mesh_hypo_length.png"
+                context  ="GLOBAL"
                 dim      ="3"/>
 
   </hypotheses>
@@ -195,26 +216,31 @@
               icon-id  ="mesh_algo_regular.png"
                hypos    ="SegmentLengthAroundVertex"
                output   ="VERTEX"
+               need-hyp ="true"
                dim      ="0"/>
 
     <algorithm type     ="Regular_1D"
               label-id ="Wire Discretisation"
               icon-id  ="mesh_algo_regular.png"
-               hypos    ="LocalLength,MaxLength,Arithmetic1D,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
-               opt-hypos="Propagation,QuadraticMesh"
+               hypos    ="Adaptive1D,LocalLength,MaxLength,Arithmetic1D,GeometricProgression,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
+               opt-hypos="Propagation,PropagOfDistribution,QuadraticMesh"
                input    ="VERTEX"
                output   ="EDGE"
+               need-hyp ="true"
                dim      ="1">
       <python-wrap>
         <algo>Regular_1D=Segment()</algo>
         <hypo>LocalLength=LocalLength(SetLength(1),,SetPrecision(1))</hypo>
         <hypo>MaxLength=MaxSize(SetLength(1))</hypo>
         <hypo>Arithmetic1D=Arithmetic1D(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
+        <hypo>GeometricProgression=GeometricProgression(SetStartLength(),SetCommonRatio(),SetReversedEdges())</hypo>
         <hypo>StartEndLength=StartEndLength(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
         <hypo>Deflection1D=Deflection1D(SetDeflection())</hypo>
+        <hypo>Adaptive1D=Adaptive(SetMinSize(),SetMaxSize(),SetDeflection())</hypo>
         <hypo>AutomaticLength=AutomaticLength(SetFineness())</hypo>
         <hypo>FixedPoints1D=FixedPoints1D(SetPoints(),SetNbSegments(),SetReversedEdges())</hypo>
         <hypo>Propagation=Propagation()</hypo>
+        <hypo>PropagOfDistribution=PropagationOfDistribution()</hypo>
         <hypo>QuadraticMesh=QuadraticMesh()</hypo>
       </python-wrap>
     </algorithm>
@@ -222,21 +248,25 @@
     <algorithm type     ="CompositeSegment_1D"
               label-id ="Composite Side Discretisation"
               icon-id  ="mesh_algo_regular.png"
-               hypos    ="LocalLength,MaxLength,Arithmetic1D,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
-               opt-hypos="Propagation,QuadraticMesh"
+               hypos    ="Adaptive1D,LocalLength,MaxLength,Arithmetic1D,GeometricProgression,StartEndLength,NumberOfSegments,Deflection1D,AutomaticLength,FixedPoints1D"
+               opt-hypos="Propagation,PropagOfDistribution,QuadraticMesh"
                input    ="VERTEX"
                output   ="EDGE"
+               need-hyp ="true"
                dim      ="1">
       <python-wrap>
         <algo>CompositeSegment_1D=Segment(algo=smeshBuilder.COMPOSITE)</algo>
         <hypo>LocalLength=LocalLength(SetLength(), ,SetPrecision())</hypo>
         <hypo>MaxLength=MaxSize(SetLength())</hypo>
         <hypo>Arithmetic1D=Arithmetic1D(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
+        <hypo>GeometricProgression=GeometricProgression(SetStartLength(),SetCommonRatio(),SetReversedEdges())</hypo>
         <hypo>StartEndLength=StartEndLength(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
         <hypo>Deflection1D=Deflection1D(SetDeflection())</hypo>
+        <hypo>Adaptive1D=Adaptive(SetMinSize(),SetMaxSize(),SetDeflection())</hypo>
         <hypo>AutomaticLength=AutomaticLength(SetFineness())</hypo>
         <hypo>FixedPoints1D=FixedPoints1D(SetPoints(),SetNbSegments(),SetReversedEdges())</hypo>
         <hypo>Propagation=Propagation()</hypo>
+        <hypo>PropagOfDistribution=PropagationOfDistribution()</hypo>
         <hypo>QuadraticMesh=QuadraticMesh()</hypo>
       </python-wrap>
     </algorithm>
@@ -276,7 +306,7 @@
                dim      ="2">
       <python-wrap>
         <algo>Quadrangle_2D=Quadrangle(algo=smeshBuilder.QUADRANGLE)</algo>
-        <hypo>QuadrangleParams=QuadrangleParameters(SetQuadType(),SetTriaVertex())</hypo>
+        <hypo>QuadrangleParams=QuadrangleParameters(SetQuadType(),SetTriaVertex(),SetEnforcedNodes(1),SetEnforcedNodes(2))</hypo>
         <hypo>ViscousLayers2D=ViscousLayers2D(SetTotalThickness(),SetNumberLayers(),SetStretchFactor(),SetIgnoreEdges())</hypo>
       </python-wrap>
     </algorithm>
@@ -285,6 +315,7 @@
                label-id ="Hexahedron (i,j,k)"
                icon-id  ="mesh_algo_hexa.png"
                input    ="QUAD"
+               output   ="HEXA,PENTA"
               need-geom="false"
                opt-hypos="ViscousLayers"
                dim      ="3">
@@ -299,6 +330,7 @@
                icon-id ="mesh_algo_regular.png"
                hypos   ="ProjectionSource1D"
                output  ="EDGE"
+               need-hyp="true"
                dim     ="1">
       <python-wrap>
         <algo>Projection_1D=Projection1D()</algo>
@@ -312,6 +344,7 @@
                input   ="EDGE"
                hypos   ="ProjectionSource2D"
                output  ="QUAD,TRIA"
+               need-hyp="true"
                dim     ="2">
       <python-wrap>
         <algo>Projection_2D=Projection2D()</algo>
@@ -324,6 +357,7 @@
                icon-id ="mesh_algo_quad.png"
                hypos   ="ProjectionSource2D"
                output  ="QUAD,TRIA"
+               need-hyp="true"
                dim     ="2">
       <python-wrap>
         <algo>Projection_1D2D=Projection1D2D()</algo>
@@ -336,6 +370,7 @@
                icon-id ="mesh_algo_hexa.png"
                hypos   ="ProjectionSource3D"
                input   ="QUAD,TRIA"
+               need-hyp="true"
                dim     ="3">
       <python-wrap>
         <algo>Projection_3D=Projection3D()</algo>
@@ -348,6 +383,7 @@
                icon-id ="mesh_algo_regular.png"
                hypos   ="ImportSource1D"
                output  ="EDGE"
+               need-hyp="true"
                dim     ="1">
       <python-wrap>
         <algo>Import_1D=UseExisting1DElements()</algo>
@@ -361,6 +397,7 @@
                hypos            ="ImportSource2D"
                output           ="QUAD,TRIA"
                support-submeshes="false"
+               need-hyp         ="true"
                dim              ="2">
       <python-wrap>
         <algo>Import_1D2D=UseExisting2DElements()</algo>
@@ -372,6 +409,7 @@
                label-id="3D Extrusion"
                icon-id ="mesh_algo_hexa.png"
                input   ="QUAD,TRIA"
+               output  ="HEXA,PENTA,OCTA,POLYHEDRON"
                dim     ="3">
       <python-wrap>
         <algo>Prism_3D=Prism()</algo>
@@ -383,6 +421,8 @@
                icon-id ="mesh_algo_hexa.png"
                hypos   ="NumberOfLayers, LayerDistribution"
                input   ="QUAD,TRIA"
+               output  ="HEXA,PENTA,OCTA,POLYHEDRON"
+               need-hyp="true"
                dim     ="3">
       <python-wrap>
         <algo>RadialPrism_3D=Prism('RadialPrism_3D')</algo>
@@ -417,7 +457,7 @@
                icon-id ="mesh_algo_quad.png"
                hypos   ="NumberOfLayers2D, LayerDistribution2D"
                input   ="EDGE"
-               output  ="QUAD,TRIA"
+               output  ="QUAD"
                dim     ="2">
       <python-wrap>
         <algo>RadialQuadrangle_1D2D=Quadrangle(algo=smeshBuilder.RADIAL_QUAD)</algo>
@@ -430,6 +470,9 @@
                icon-id          ="mesh_algo_hexa.png"
                hypos            ="CartesianParameters3D"
                support-submeshes="false"
+               output           ="HEXA"
+               need-hyp         ="true"
+               context          ="GLOBAL"
                dim              ="3">
       <python-wrap>
         <algo>Cartesian_3D=BodyFitted()</algo>