};
+ // structure used in MakePolyLine() to define a cutting plane
+ struct PolySegment
+ {
+ // point 1: if node1ID2 > 0, then the point is in the middle of a face edge defined
+ // by two nodes, else it is at node1ID1
+ long node1ID1;
+ long node1ID2;
+
+ // point 2: if node2ID2 > 0, then the point is in the middle of a face edge defined
+ // by two nodes, else it is at node2ID1
+ long node2ID1;
+ long node2ID2;
+
+ DirStruct vector; // vector on the plane; to use a default plane set vector = (0,0,0)
+ };
+ typedef sequence<PolySegment> ListOfPolySegments;
+
+
/*!
* This interface makes modifications on the Mesh - removing elements and nodes etc.
*/
* \param IDsOfElements Ids of triangles to be fused.
* \param theCriterion Is used to choose a neighbour to fuse with.
* \param theMaxAngle Is a max angle between element normals at which fusion
- * is still performed; theMaxAngle is mesured in radians.
+ * is still performed; theMaxAngle is measured in radians.
* \return \c true in case of success, FALSE otherwise.
*/
boolean TriToQuad (in long_array IDsOfElements,
/*!
* \brief Split quadrangles into triangles.
- * \param theElems The faces to be splitted.
+ * \param theElems The faces to be split.
* \param the13Diag Is used to choose a diagonal for splitting.
* \return TRUE in case of success, FALSE otherwise.
*/
/*!
* Find better splitting of the given quadrangle.
- * \param IDOfQuad ID of the quadrangle to be splitted.
+ * \param IDOfQuad ID of the quadrangle to be split.
* \param Criterion A criterion to choose a diagonal for splitting.
* \return 1 if 1-3 diagonal is better, 2 if 2-4
* diagonal is better, 0 if error occurs.
in string MeshName)
raises (SALOME::SALOME_Exception);
+ SMESH_Mesh Offset(in SMESH_IDSource theObject,
+ in double Value,
+ in boolean CopyGroups,
+ in string MeshName,
+ out ListOfGroups Groups)
+ raises (SALOME::SALOME_Exception);
+
void FindCoincidentNodes (in double Tolerance,
out array_of_long_array GroupsOfNodes,
in boolean SeparateCornersAndMedium)
raises (SALOME::SALOME_Exception);
void MergeNodes (in array_of_long_array GroupsOfNodes,
- in SMESH::ListOfIDSources NodesToKeep)
+ in SMESH::ListOfIDSources NodesToKeep,
+ in boolean AvoidMakingHoles)
raises (SALOME::SALOME_Exception);
/*!
* Return point state in a closed 2D mesh in terms of TopAbs_State enumeration.
* TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails.
*/
- short GetPointState(in double x, in double y, in double z)
+ short GetPointState(in double x, in double y, in double z)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Check if a 2D mesh is manifold
+ */
+ boolean IsManifold()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Check if orientation of 2D elements is coherent
+ */
+ boolean IsCoherentOrientation2D()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns all or only closed FreeBorder's.
+ */
+ ListOfFreeBorders FindFreeBorders(in boolean closedOnly)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Fill with 2D elements a hole defined by a FreeBorder.
+ */
+ void FillHole(in FreeBorder hole)
raises (SALOME::SALOME_Exception);
/*!
* \param theElements - container of elements to duplicate.
* \param theGroupName - a name of group to contain the generated elements.
* If a group with such a name already exists, the new elements
- * are added to the existng group, else a new group is created.
+ * are added to the existing group, else a new group is created.
* If \a theGroupName is empty, new elements are not added
* in any group.
* \return a group where the new elements are added. NULL if theGroupName == "".
in GEOM::GEOM_Object theShape,
in string groupName,
in double_array theNodesCoords,
- out array_of_long_array GroupsOfNodes)
+ out array_of_long_array GroupsOfNodes)
+ raises (SALOME::SALOME_Exception);
+
+
+ /*!
+ * \brief Create a polyline consisting of 1D mesh elements each lying on a 2D element of
+ * the initial mesh. Positions of new nodes are found by cutting the mesh by the
+ * plane passing through pairs of points specified by each PolySegment structure.
+ * If there are several paths connecting a pair of points, the shortest path is
+ * selected by the module. Position of the cutting plane is defined by the two
+ * points and an optional vector lying on the plane specified by a PolySegment.
+ * By default the vector is defined by Mesh module as following. A middle point
+ * of the two given points is computed. The middle point is projected to the mesh.
+ * The vector goes from the middle point to the projection point. In case of planar
+ * mesh, the vector is normal to the mesh.
+ * \param [inout] segments - PolySegment's defining positions of cutting planes.
+ * Return the used vector which goes from the middle point to its projection.
+ * \param [in] groupName - optional name of a group where created mesh segments will
+ * be added.
+ */
+ void MakePolyLine(inout ListOfPolySegments segments,
+ in string groupName)
raises (SALOME::SALOME_Exception);
};
};
