-// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#define _SMESH_MESHEDITOR_IDL_
#include "SMESH_Mesh.idl"
+#include "SMESH_Gen.idl"
module SMESH
{
+ interface NumericalFunctor;
+
enum Bnd_Dimension { BND_2DFROM3D, BND_1DFROM3D, BND_1DFROM2D };
+
+ struct FreeBorder
+ {
+ SMESH::long_array nodeIDs; // all nodes defining a free border
+ // 1st and last node is same in a closed border
+ };
+ struct FreeBorderPart
+ {
+ short border; // border index within a sequence<FreeBorder>
+ long node1; // node index within the border-th FreeBorder
+ long node2;
+ long nodeLast;
+ };
+ typedef sequence<FreeBorder> ListOfFreeBorders;
+ typedef sequence<FreeBorderPart> FreeBordersGroup;
+ typedef sequence<FreeBordersGroup> ListOfFreeBorderGroups;
+
+ struct CoincidentFreeBorders
+ {
+ ListOfFreeBorders borders; // nodes of all free borders
+ ListOfFreeBorderGroups coincidentGroups; // groups of coincident parts of borders
+ };
+
+
/*!
* This interface makes modifications on the Mesh - removing elements and nodes etc.
*/
- interface NumericalFunctor;
interface SMESH_MeshEditor
{
+ /*!
+ * Returns a mesh subject to edition
+ */
+ SMESH_Mesh GetMesh();
+
+ /*!
+ * Return data of mesh edition preview which is computed provided
+ * that the editor was obtained through SMESH_Mesh::GetMeshEditPreviewer()
+ */
+ MeshPreviewStruct GetPreviewData() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * If during last operation of MeshEditor some nodes were
+ * created, this method returns list of their IDs, if new nodes
+ * not created - returns empty list
+ */
+ long_array GetLastCreatedNodes() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * If during last operation of MeshEditor some elements were
+ * created, this method returns list of their IDs, if new elements
+ * not created - returns empty list
+ */
+ long_array GetLastCreatedElems() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Clears sequences of last created elements and nodes
+ */
+ void ClearLastCreated() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Returns description of an error/warning occured during the last operation
+ */
+ ComputeError GetLastError() raises (SALOME::SALOME_Exception);
+
/*!
* \brief Wrap a sequence of ids in a SMESH_IDSource
* \param IDsOfElements list of mesh elements identifiers
* \param IDsOfElements list of mesh elements identifiers
* \return \c true if elements are correctly removed or \c false otherwise
*/
- boolean RemoveElements(in long_array IDsOfElements);
+ boolean RemoveElements(in long_array IDsOfElements) raises (SALOME::SALOME_Exception);
/*!
* \brief Remove mesh nodes specified by their identifiers.
* \param IDsOfNodes list of mesh nodes identifiers
* \return \c true if nodes are correctly removed or \c false otherwise
*/
- boolean RemoveNodes(in long_array IDsOfNodes);
+ boolean RemoveNodes(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
/*!
* \brief Remove all orphan nodes.
* \return number of removed nodes
*/
- long RemoveOrphanNodes();
+ long RemoveOrphanNodes() raises (SALOME::SALOME_Exception);
/*!
* \brief Add a new node.
* \param z Z coordinate of new node
* \return integer identifier of new node
*/
- long AddNode(in double x, in double y, in double z);
+ long AddNode(in double x, in double y, in double z) raises (SALOME::SALOME_Exception);
/*!
* Create a 0D element on the given node.
* \param IdOfNode Node IDs for creation of element.
*/
- long Add0DElement(in long IDOfNode);
+ long Add0DElement(in long IDOfNode) raises (SALOME::SALOME_Exception);
/*!
* Create a ball element on the given node.
* \param IdOfNode Node IDs for creation of element.
*/
- long AddBall(in long IDOfNode, in double diameter);
+ long AddBall(in long IDOfNode, in double diameter) raises (SALOME::SALOME_Exception);
/*!
* Create an edge, either linear and quadratic (this is determed
* of MED. This description is located by the following link:
* http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3.
*/
- long AddEdge(in long_array IDsOfNodes);
+ long AddEdge(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
/*!
* Create face, either linear and quadratic (this is determed
* of MED. This description is located by the following link:
* http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3.
*/
- long AddFace(in long_array IDsOfNodes);
+ long AddFace(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
- long AddPolygonalFace(in long_array IdsOfNodes);
+ long AddPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Create a quadratic polygonal face
+ * \param IdsOfNodes - nodes of the polygon; corner nodes follow first
+ * \return long - ID of a new polygon
+ */
+ long AddQuadPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
/*!
* Create volume, either linear and quadratic (this is determed
* of MED. This description is located by the following link:
* http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3.
*/
- long AddVolume(in long_array IDsOfNodes);
+ long AddVolume(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
/*!
* Create volume of many faces, giving nodes for each face.
* gives quantity of nodes in face number i.
*/
long AddPolyhedralVolume (in long_array IdsOfNodes,
- in long_array Quantities);
-
+ in long_array Quantities) raises (SALOME::SALOME_Exception);
/*!
* Create volume of many faces, giving IDs of existing faces.
* \param IdsOfFaces List of face IDs for volume creation.
* \note The created volume will refer only to nodes
* of the given faces, not to the faces itself.
*/
- long AddPolyhedralVolumeByFaces (in long_array IdsOfFaces);
+ long AddPolyhedralVolumeByFaces (in long_array IdsOfFaces) raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Create 0D elements on all nodes of the given object except those
+ * nodes on which a 0D element already exists.
+ * \param theObject object on whose nodes 0D elements will be created.
+ * \param theGroupName optional name of a group to add 0D elements created
+ * and/or found on nodes of \a theObject.
+ * \return an object (a new group or a temporary SMESH_IDSource) holding
+ * ids of new and/or found 0D elements.
+ */
+ SMESH_IDSource Create0DElementsOnAllNodes(in SMESH_IDSource theObject,
+ in string theGroupName)
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Bind a node to a vertex
raises (SALOME::SALOME_Exception);
- boolean MoveNode(in long NodeID, in double x, in double y, in double z);
+ boolean MoveNode(in long NodeID, in double x, in double y, in double z)
+ raises (SALOME::SALOME_Exception);
- boolean InverseDiag(in long NodeID1, in long NodeID2);
+ boolean InverseDiag(in long NodeID1, in long NodeID2)
+ raises (SALOME::SALOME_Exception);
- boolean DeleteDiag(in long NodeID1, in long NodeID2);
+ boolean DeleteDiag(in long NodeID1, in long NodeID2)
+ raises (SALOME::SALOME_Exception);
- boolean Reorient(in long_array IDsOfElements);
+ boolean Reorient(in long_array IDsOfElements)
+ raises (SALOME::SALOME_Exception);
- boolean ReorientObject(in SMESH_IDSource theObject);
+ boolean ReorientObject(in SMESH_IDSource theObject)
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Reorient faces contained in \a the2Dgroup.
* \param the2Dgroup - the mesh or its part to reorient
* \param theFace - ID of face whose orientation is checked.
* It can be < 1 then \a thePoint is used to find a face.
* \param thePoint - is used to find a face if \a theFace < 1.
- * \return number of reoriented elements.
+ * \return number of reoriented faces.
*/
long Reorient2D(in SMESH_IDSource the2Dgroup,
in DirStruct theDirection,
in long theFace,
in PointStruct thePoint) raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Reorient faces basing on orientation of adjacent volumes.
+ * \param faces - a list of objects containing face to reorient
+ * \param volumes - an object containing volumes.
+ * \param outsideNormal - to orient faces to have their normal
+ * pointing either \a outside or \a inside the adjacent volumes.
+ * \return number of reoriented faces.
+ */
+ long Reorient2DBy3D(in ListOfIDSources faces,
+ in SMESH_IDSource volumes,
+ in boolean outsideNormal) raises (SALOME::SALOME_Exception);
/*!
* \brief Fuse neighbour triangles into quadrangles.
- * \param theElems The triangles to be fused.
+ * \param IDsOfElements Ids of triangles to be fused.
* \param theCriterion Is used to choose a neighbour to fuse with.
* \param theMaxAngle Is a max angle between element normals at which fusion
* is still performed; theMaxAngle is mesured in radians.
- * \return TRUE in case of success, FALSE otherwise.
+ * \return \c true in case of success, FALSE otherwise.
*/
boolean TriToQuad (in long_array IDsOfElements,
in NumericalFunctor Criterion,
- in double MaxAngle);
-
+ in double MaxAngle) raises (SALOME::SALOME_Exception);
/*!
* \brief Fuse neighbour triangles into quadrangles.
*
- * Behaves like the above method, taking list of elements from \a theObject
+ * Behaves like the above method, taking a list of elements from \a theObject
*/
boolean TriToQuadObject (in SMESH_IDSource theObject,
in NumericalFunctor Criterion,
- in double MaxAngle);
+ in double MaxAngle) raises (SALOME::SALOME_Exception);
/*!
* \brief Split quadrangles into triangles.
- * \param theElems The faces to be splitted.
+ * \param IDsOfElements Ids of quadrangles to split.
* \param theCriterion Is used to choose a diagonal for splitting.
* \return TRUE in case of success, FALSE otherwise.
*/
boolean QuadToTri (in long_array IDsOfElements,
- in NumericalFunctor Criterion);
-
+ in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception);
/*!
* \brief Split quadrangles into triangles.
*
- * Behaves like the above method, taking list of elements from \a theObject
+ * Behaves like the above method, taking a list of elements from \a theObject
*/
boolean QuadToTriObject (in SMESH_IDSource theObject,
- in NumericalFunctor Criterion);
+ in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Split each of quadrangles into 4 triangles.
+ * \param theQuads Container of quadrangles to split.
+ */
+ void QuadTo4Tri (in SMESH_IDSource theQuads) raises (SALOME::SALOME_Exception);
/*!
* \brief Split quadrangles into triangles.
* \return TRUE in case of success, FALSE otherwise.
*/
boolean SplitQuad (in long_array IDsOfElements,
- in boolean Diag13);
-
+ in boolean Diag13) raises (SALOME::SALOME_Exception);
/*!
* \brief Split quadrangles into triangles.
*
* Behaves like the above method, taking list of elements from \a theObject
*/
boolean SplitQuadObject (in SMESH_IDSource theObject,
- in boolean Diag13);
+ in boolean Diag13) raises (SALOME::SALOME_Exception);
/*!
* Find better splitting of the given quadrangle.
* diagonal is better, 0 if error occurs.
*/
long BestSplit (in long IDOfQuad,
- in NumericalFunctor Criterion);
+ in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception);
/*!
* \brief Split volumic elements into tetrahedrons
void SplitVolumesIntoTetra(in SMESH_IDSource elems, in short methodFlags)
raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Split hexahedra into triangular prisms
+ * \param elems - elements to split
+ * \param startHexPoint - a point used to find a hexahedron for which \a facetToSplitNormal
+ * gives a normal vector defining facets to split into triangles.
+ * \param facetToSplitNormal - normal used to find a facet of hexahedron
+ * to split into triangles.
+ * \param methodFlags - flags passing splitting method:
+ * 1 - split the hexahedron into 2 prisms
+ * 2 - split the hexahedron into 4 prisms
+ * \param allDomains - if \c False, only hexahedra adjacent to one closest
+ * to \a facetToSplitNormal location are split, else \a facetToSplitNormal
+ * is used to find the facet to split in all domains present in \a elems.
+ */
+ void SplitHexahedraIntoPrisms(in SMESH_IDSource elems,
+ in SMESH::PointStruct startHexPoint,
+ in SMESH::DirStruct facetToSplitNormal,
+ in short methodFlags,
+ in boolean allDomains)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Split bi-quadratic elements into linear ones without creation of additional nodes.
+ * - bi-quadratic triangle will be split into 3 linear quadrangles;
+ * - bi-quadratic quadrangle will be split into 4 linear quadrangles;
+ * - tri-quadratic hexahedron will be split into 8 linear hexahedra;
+ * Quadratic elements of lower dimension adjacent to the split bi-quadratic element
+ * will be split in order to keep the mesh conformal.
+ * \param elems - elements to split
+ */
+ void SplitBiQuadraticIntoLinear(in ListOfIDSources elems)
+ raises (SALOME::SALOME_Exception);
+
enum Smooth_Method { LAPLACIAN_SMOOTH, CENTROIDAL_SMOOTH };
in long_array IDsOfFixedNodes,
in long MaxNbOfIterations,
in double MaxAspectRatio,
- in Smooth_Method Method);
+ in Smooth_Method Method) raises (SALOME::SALOME_Exception);
boolean SmoothObject(in SMESH_IDSource theObject,
in long_array IDsOfFixedNodes,
in long MaxNbOfIterations,
in double MaxAspectRatio,
- in Smooth_Method Method);
+ in Smooth_Method Method) raises (SALOME::SALOME_Exception);
boolean SmoothParametric(in long_array IDsOfElements,
in long_array IDsOfFixedNodes,
in long MaxNbOfIterations,
in double MaxAspectRatio,
- in Smooth_Method Method);
+ in Smooth_Method Method) raises (SALOME::SALOME_Exception);
boolean SmoothParametricObject(in SMESH_IDSource theObject,
in long_array IDsOfFixedNodes,
in long MaxNbOfIterations,
in double MaxAspectRatio,
- in Smooth_Method Method);
-
- void ConvertToQuadratic(in boolean theForce3d);
-
- boolean ConvertFromQuadratic();
+ in Smooth_Method Method) raises (SALOME::SALOME_Exception);
+ void ConvertToQuadratic(in boolean theForce3d)
+ raises (SALOME::SALOME_Exception);
void ConvertToQuadraticObject(in boolean theForce3d,
in SMESH_IDSource theObject)
raises (SALOME::SALOME_Exception);
+
+ boolean ConvertFromQuadratic()
+ raises (SALOME::SALOME_Exception);
+ void ConvertFromQuadraticObject(in SMESH_IDSource theObject)
+ raises (SALOME::SALOME_Exception);
- void ConvertFromQuadraticObject(in SMESH_IDSource theObject)
- raises (SALOME::SALOME_Exception);
-
- void RenumberNodes();
-
- void RenumberElements();
-
- /*!
- * \brief Genarate dim+1 elements by rotation of given elements around axis
- * \param IDsOfElements - elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweep(in long_array IDsOfElements,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepMakeGroups(in long_array IDsOfElements,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObjectMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject1D(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObject1DMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject2D(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObject2DMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Genarate dim+1 elements by extrusion of elements along vector
- * \param IDsOfElements - elements to sweep
- * \param StepVector - vector giving direction and distance of an extrusion step
- * \param NbOfSteps - number of elements to generate from one element
- */
- void ExtrusionSweep(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps);
- /*!
- * \brief Genarate dim+1 elements by extrusion of elements along vector
- * \param IDsOfElements - elements to sweep
- * \param StepVector - vector giving direction and distance of an extrusion step
- * \param NbOfSteps - number of elements to generate from one element
- */
- void ExtrusionSweep0D(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups ExtrusionSweepMakeGroups(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps);
- /*!
- * \brief Same as previous but elements are nodes
+ void ConvertToBiQuadratic(in boolean theForce3d,
+ in SMESH_IDSource theObject)
+ raises (SALOME::SALOME_Exception);
+
+ void RenumberNodes() raises (SALOME::SALOME_Exception);
+
+ void RenumberElements() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Generate dim+1 elements by rotation of the object around axis
+ * \param Nodes - nodes to revolve: a list including groups, sub-meshes or a mesh
+ * \param Edges - edges to revolve: a list including groups, sub-meshes or a mesh
+ * \param Faces - faces to revolve: a list including groups, sub-meshes or a mesh
+ * \param Axis - rotation axis
+ * \param AngleInRadians - rotation angle
+ * \param NbOfSteps - number of elements to generate from one element
+ * \param ToMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups craeted if \a ToMakeGroups is true
+ */
+ ListOfGroups RotationSweepObjects(in ListOfIDSources Nodes,
+ in ListOfIDSources Edges,
+ in ListOfIDSources Faces,
+ in AxisStruct Axis,
+ in double AngleInRadians,
+ in long NbOfSteps,
+ in double Tolerance,
+ in boolean ToMakeGroups)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Generate dim+1 elements by extrusion of elements along vector
+ * \param nodes - nodes to extrude: a list including groups, sub-meshes or a mesh
+ * \param edges - edges to extrude: a list including groups, sub-meshes or a mesh
+ * \param faces - faces to extrude: a list including groups, sub-meshes or a mesh
+ * \param stepVector - vector giving direction and distance of an extrusion step
+ * \param nbOfSteps - number of elements to generate from one element
+ * \param toMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups craeted if \a toMakeGroups is true
+ */
+ ListOfGroups ExtrusionSweepObjects(in ListOfIDSources nodes,
+ in ListOfIDSources edges,
+ in ListOfIDSources faces,
+ in DirStruct stepVector,
+ in long nbOfSteps,
+ in boolean toMakeGroups)
+ raises (SALOME::SALOME_Exception);
+
+ /*! Generates new elements by extrusion along the normal to a discretized surface or wire
*/
- ListOfGroups ExtrusionSweepMakeGroups0D(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps);
- /*!
- * Generate new elements by extrusion of theElements
- * by StepVector by NbOfSteps
- * param ExtrFlags set flags for performing extrusion
- * param SewTolerance - uses for comparing locations of nodes if flag
- * EXTRUSION_FLAG_SEW is set
- */
- void AdvancedExtrusion(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps,
- in long ExtrFlags,
- in double SewTolerance);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups AdvancedExtrusionMakeGroups(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps,
- in long ExtrFlags,
- in double SewTolerance);
-
- void ExtrusionSweepObject(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
- ListOfGroups ExtrusionSweepObjectMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
-
- void ExtrusionSweepObject0D(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
- ListOfGroups ExtrusionSweepObject0DMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
-
- void ExtrusionSweepObject1D(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
- ListOfGroups ExtrusionSweepObject1DMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
-
- void ExtrusionSweepObject2D(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
- ListOfGroups ExtrusionSweepObject2DMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
+ ListOfGroups ExtrusionByNormal(in ListOfIDSources theObjects,
+ in double stepSize,
+ in long nbOfSteps,
+ in boolean byAverageNormal,
+ in boolean useInputElemsOnly,
+ in boolean makeGroups,
+ in short dim)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Generate new elements by extrusion of theElements
+ * by StepVector by NbOfSteps
+ * \param ExtrFlags set flags for performing extrusion
+ * \param SewTolerance - uses for comparing locations of nodes if flag
+ * EXTRUSION_FLAG_SEW is set
+ * \param ToMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups craeted if \a ToMakeGroups is true
+ */
+ ListOfGroups AdvancedExtrusion(in long_array IDsOfElements,
+ in DirStruct StepVector,
+ in long NbOfSteps,
+ in long ExtrFlags,
+ in double SewTolerance,
+ in boolean ToMakeGroups)
+ raises (SALOME::SALOME_Exception);
enum Extrusion_Error {
EXTR_OK,
EXTR_BAD_STARTING_NODE,
EXTR_BAD_ANGLES_NUMBER,
EXTR_CANT_GET_TANGENT
- };
-
- ListOfGroups ExtrusionAlongPathX(in long_array IDsOfElements,
- in SMESH_IDSource Path,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean LinearVariation,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- in boolean MakeGroups,
- in ElementType ElemType,
- out Extrusion_Error Error);
-
- ListOfGroups ExtrusionAlongPathObjX(in SMESH_IDSource theObject,
- in SMESH_IDSource Path,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean LinearVariation,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- in boolean MakeGroups,
- in ElementType ElemType,
- out Extrusion_Error Error);
-
- Extrusion_Error ExtrusionAlongPath(in long_array IDsOfElements,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint);
- ListOfGroups ExtrusionAlongPathMakeGroups(in long_array IDsOfElements,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error);
-
- Extrusion_Error ExtrusionAlongPathObject(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint);
- ListOfGroups ExtrusionAlongPathObjectMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error);
-
- Extrusion_Error ExtrusionAlongPathObject1D(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint);
- ListOfGroups ExtrusionAlongPathObject1DMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error);
-
- Extrusion_Error ExtrusionAlongPathObject2D(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint);
- ListOfGroups ExtrusionAlongPathObject2DMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error);
+ };
+
+ ListOfGroups ExtrusionAlongPathObjects(in ListOfIDSources Nodes,
+ in ListOfIDSources Edges,
+ in ListOfIDSources Faces,
+ in SMESH_IDSource Path,
+ in GEOM::GEOM_Object PathShape,
+ in long NodeStart,
+ in boolean HasAngles,
+ in double_array Angles,
+ in boolean LinearVariation,
+ in boolean HasRefPoint,
+ in PointStruct RefPoint,
+ in boolean MakeGroups,
+ out Extrusion_Error Error)
+ raises (SALOME::SALOME_Exception);
/*!
* Compute rotation angles for ExtrusionAlongPath as linear variation
void Mirror (in long_array IDsOfElements,
in AxisStruct Mirror,
in MirrorType Type,
- in boolean Copy);
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups MirrorMakeGroups (in long_array IDsOfElements,
in AxisStruct Mirror,
- in MirrorType Type);
+ in MirrorType Type)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh MirrorMakeMesh (in long_array IDsOfElements,
in AxisStruct Mirror,
in MirrorType Type,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void MirrorObject (in SMESH_IDSource theObject,
in AxisStruct Mirror,
in MirrorType Type,
- in boolean Copy);
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups MirrorObjectMakeGroups (in SMESH_IDSource theObject,
in AxisStruct Mirror,
- in MirrorType Type);
+ in MirrorType Type)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh MirrorObjectMakeMesh (in SMESH_IDSource theObject,
in AxisStruct Mirror,
in MirrorType Type,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void Translate (in long_array IDsOfElements,
in DirStruct Vector,
- in boolean Copy);
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups TranslateMakeGroups (in long_array IDsOfElements,
- in DirStruct Vector);
+ in DirStruct Vector)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh TranslateMakeMesh (in long_array IDsOfElements,
in DirStruct Vector,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void TranslateObject (in SMESH_IDSource theObject,
in DirStruct Vector,
- in boolean Copy);
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups TranslateObjectMakeGroups (in SMESH_IDSource theObject,
- in DirStruct Vector);
+ in DirStruct Vector)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh TranslateObjectMakeMesh (in SMESH_IDSource theObject,
in DirStruct Vector,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void Scale (in SMESH_IDSource theObject,
in PointStruct thePoint,
in double_array theScaleFact,
- in boolean Copy);
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups ScaleMakeGroups (in SMESH_IDSource theObject,
in PointStruct thePoint,
- in double_array theScaleFact);
+ in double_array theScaleFact)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh ScaleMakeMesh (in SMESH_IDSource theObject,
in PointStruct thePoint,
in double_array theScaleFact,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void Rotate (in long_array IDsOfElements,
in AxisStruct Axis,
in double AngleInRadians,
- in boolean Copy);
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups RotateMakeGroups (in long_array IDsOfElements,
in AxisStruct Axis,
- in double AngleInRadians);
+ in double AngleInRadians)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh RotateMakeMesh (in long_array IDsOfElements,
in AxisStruct Axis,
in double AngleInRadians,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void RotateObject (in SMESH_IDSource theObject,
in AxisStruct Axis,
in double AngleInRadians,
- in boolean Copy);
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups RotateObjectMakeGroups (in SMESH_IDSource theObject,
in AxisStruct Axis,
- in double AngleInRadians);
+ in double AngleInRadians)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh RotateObjectMakeMesh (in SMESH_IDSource theObject,
in AxisStruct Axis,
in double AngleInRadians,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void FindCoincidentNodes (in double Tolerance,
- out array_of_long_array GroupsOfNodes);
+ out array_of_long_array GroupsOfNodes,
+ in boolean SeparateCornersAndMedium)
+ raises (SALOME::SALOME_Exception);
void FindCoincidentNodesOnPart (in SMESH_IDSource SubMeshOrGroup,
in double Tolerance,
- out array_of_long_array GroupsOfNodes);
+ out array_of_long_array GroupsOfNodes,
+ in boolean SeparateCornersAndMedium)
+ raises (SALOME::SALOME_Exception);
void FindCoincidentNodesOnPartBut (in SMESH_IDSource SubMeshOrGroup,
in double Tolerance,
out array_of_long_array GroupsOfNodes,
- in ListOfIDSources ExceptSubMeshOrGroups);
+ in ListOfIDSources ExceptSubMeshOrGroups,
+ in boolean SeparateCornersAndMedium)
+ raises (SALOME::SALOME_Exception);
- void MergeNodes (in array_of_long_array GroupsOfNodes);
+ void MergeNodes (in array_of_long_array GroupsOfNodes,
+ in SMESH::ListOfIDSources NodesToKeep)
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Find elements built on the same nodes.
* \return List of groups of equal elements.
*/
void FindEqualElements (in SMESH_IDSource MeshOrSubMeshOrGroup,
- out array_of_long_array GroupsOfElementsID);
+ out array_of_long_array GroupsOfElementsID)
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Merge elements in each given group.
* \param GroupsOfElementsID Groups of elements for merging.
*/
- void MergeElements(in array_of_long_array GroupsOfElementsID);
+ void MergeElements(in array_of_long_array GroupsOfElementsID)
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Merge equal elements in the whole mesh.
*/
- void MergeEqualElements();
+ void MergeEqualElements()
+ raises (SALOME::SALOME_Exception);
/*!
* If the given ID is a valid node ID (nodeID > 0), just move this node, else
* move the node closest to the point to point's location and return ID of the node
*/
- long MoveClosestNodeToPoint(in double x, in double y, in double z, in long nodeID);
+ long MoveClosestNodeToPoint(in double x, in double y, in double z, in long nodeID)
+ raises (SALOME::SALOME_Exception);
/*!
* Return ID of node closest to a given point
*/
- long FindNodeClosestTo(in double x, in double y, in double z);
+ long FindNodeClosestTo(in double x, in double y, in double z)
+ raises (SALOME::SALOME_Exception);
/*!
* Return elements of given type where the given point is IN or ON.
*
* 'ALL' type means elements of any type excluding nodes and 0D elements
*/
- long_array FindElementsByPoint(in double x, in double y, in double z, in ElementType type);
+ long_array FindElementsByPoint(in double x, in double y, in double z, in ElementType type)
+ raises (SALOME::SALOME_Exception);
/*!
* Searching among the given elements, return elements of given type
*/
long_array FindAmongElementsByPoint(in SMESH_IDSource elements,
in double x, in double y, in double z,
- in ElementType type);
+ in ElementType type)
+ raises (SALOME::SALOME_Exception);
/*!
* Return point state in a closed 2D mesh in terms of TopAbs_State enumeration.
* TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails.
*/
- short GetPointState(in double x, in double y, in double z);
+ short GetPointState(in double x, in double y, in double z)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns groups of FreeBorder's coincident within the given tolerance.
+ * If the tolerance <= 0.0 then one tenth of an average size of elements adjacent
+ * to free borders being compared is used.
+ */
+ CoincidentFreeBorders FindCoincidentFreeBorders(in double tolerance);
+
+ /*!
+ * Sew FreeBorder's of each group
+ */
+ short SewCoincidentFreeBorders (in CoincidentFreeBorders freeBorders,
+ in boolean createPolygons,
+ in boolean createPolyedrs)
+ raises (SALOME::SALOME_Exception);
enum Sew_Error {
SEW_OK,
in long SecondNodeID2,
in long LastNodeID2,
in boolean CreatePolygons,
- in boolean CreatePolyedrs);
+ in boolean CreatePolyedrs)
+ raises (SALOME::SALOME_Exception);
Sew_Error SewConformFreeBorders (in long FirstNodeID1,
in long SecondNodeID1,
in long LastNodeID1,
in long FirstNodeID2,
- in long SecondNodeID2);
+ in long SecondNodeID2)
+ raises (SALOME::SALOME_Exception);
Sew_Error SewBorderToSide (in long FirstNodeIDOnFreeBorder,
in long SecondNodeIDOnFreeBorder,
in long FirstNodeIDOnSide,
in long LastNodeIDOnSide,
in boolean CreatePolygons,
- in boolean CreatePolyedrs);
+ in boolean CreatePolyedrs)
+ raises (SALOME::SALOME_Exception);
Sew_Error SewSideElements (in long_array IDsOfSide1Elements,
in long_array IDsOfSide2Elements,
in long NodeID1OfSide1ToMerge,
in long NodeID1OfSide2ToMerge,
in long NodeID2OfSide1ToMerge,
- in long NodeID2OfSide2ToMerge);
+ in long NodeID2OfSide2ToMerge)
+ raises (SALOME::SALOME_Exception);
/*!
* Set new nodes for given element.
* If number of nodes is not corresponded to type of
* element - returns false
*/
- boolean ChangeElemNodes(in long ide, in long_array newIDs);
-
- /*!
- * Return data of mesh edition preview which is computed provided
- * that the editor was obtained trough SMESH_Mesh::GetMeshEditPreviewer()
- */
- MeshPreviewStruct GetPreviewData();
-
- /*!
- * If during last operation of MeshEditor some nodes were
- * created this method returns list of it's IDs, if new nodes
- * not creared - returns empty list
- */
- long_array GetLastCreatedNodes();
+ boolean ChangeElemNodes(in long ide, in long_array newIDs)
+ raises (SALOME::SALOME_Exception);
- /*!
- * If during last operation of MeshEditor some elements were
- * created this method returns list of it's IDs, if new elements
- * not creared - returns empty list
- */
- long_array GetLastCreatedElems();
+ /*!
+ * \brief Duplicates given elements, i.e. creates new elements based on the
+ * same nodes as the given ones.
+ * \param theElements - container of elements to duplicate.
+ * \param theGroupName - a name of group to contain the generated elements.
+ * If a group with such a name already exists, the new elements
+ * are added to the existng group, else a new group is created.
+ * If \a theGroupName is empty, new elements are not added
+ * in any group.
+ * \return a group where the new elements are added. NULL if theGroupName == "".
+ * \sa DoubleNode()
+ */
+ SMESH_Group DoubleElements( in SMESH_IDSource theElements,
+ in string theGroupName )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
* \param theModifiedElems - identifiers of elements to be updated by the new (doubled)
* nodes. If list of element identifiers is empty then nodes are doubled but
* they not assigned to elements
- * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
* \sa DoubleNode(), DoubleNodeGroup(), DoubleNodeGroups()
*/
- boolean DoubleNodes( in long_array theNodes, in long_array theModifiedElems );
+ boolean DoubleNodes( in long_array theNodes, in long_array theModifiedElems )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
* \return TRUE if operation has been completed successfully, FALSE otherwise
* \sa DoubleNodes(), DoubleNodeGroup(), DoubleNodeGroups()
*/
- boolean DoubleNode( in long theNodeId, in long_array theModifiedElems );
+ boolean DoubleNode( in long theNodeId, in long_array theModifiedElems )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
* \sa DoubleNode(), DoubleNodes(), DoubleNodeGroups(), DoubleNodeGroupNew()
*/
boolean DoubleNodeGroup( in SMESH_GroupBase theNodes,
- in SMESH_GroupBase theModifiedElems );
+ in SMESH_GroupBase theModifiedElems )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements.
* Works as DoubleNodeGroup() described above, but returns a new group with
* \sa DoubleNodeGroup()
*/
SMESH_Group DoubleNodeGroupNew( in SMESH_GroupBase theNodes,
- in SMESH_GroupBase theModifiedElems );
+ in SMESH_GroupBase theModifiedElems )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
* \sa DoubleNode(), DoubleNodeGroup(), DoubleNodes()
*/
boolean DoubleNodeGroups( in ListOfGroups theNodes,
- in ListOfGroups theModifiedElems );
+ in ListOfGroups theModifiedElems )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
* Works as DoubleNodeGroups() described above, but returns a new group with
* \sa DoubleNodeGroups()
*/
SMESH_Group DoubleNodeGroupsNew( in ListOfGroups theNodes,
- in ListOfGroups theModifiedElems );
+ in ListOfGroups theModifiedElems )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
*/
boolean DoubleNodeElem( in long_array theElems,
in long_array theNodesNot,
- in long_array theAffectedElems );
+ in long_array theAffectedElems )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
*/
boolean DoubleNodeElemInRegion( in long_array theElems,
in long_array theNodesNot,
- in GEOM::GEOM_Object theShape );
+ in GEOM::GEOM_Object theShape )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
*/
boolean DoubleNodeElemGroup( in SMESH_GroupBase theElems,
in SMESH_GroupBase theNodesNot,
- in SMESH_GroupBase theAffectedElems );
+ in SMESH_GroupBase theAffectedElems )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements.
* Works as DoubleNodeElemGroup() described above, but returns a new group with
*/
SMESH_Group DoubleNodeElemGroupNew( in SMESH_GroupBase theElems,
in SMESH_GroupBase theNodesNot,
- in SMESH_GroupBase theAffectedElems );
+ in SMESH_GroupBase theAffectedElems )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements.
* Works as DoubleNodeElemGroup() described above, but returns two new groups:
in SMESH_GroupBase theNodesNot,
in SMESH_GroupBase theAffectedElems,
in boolean theElemGroupNeeded,
- in boolean theNodeGroupNeeded);
+ in boolean theNodeGroupNeeded)
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
*/
boolean DoubleNodeElemGroupInRegion( in SMESH_GroupBase theElems,
in SMESH_GroupBase theNodesNot,
- in GEOM::GEOM_Object theShape );
+ in GEOM::GEOM_Object theShape )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
*/
boolean DoubleNodeElemGroups( in ListOfGroups theElems,
in ListOfGroups theNodesNot,
- in ListOfGroups theAffectedElems );
+ in ListOfGroups theAffectedElems )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements.
* Works as DoubleNodeElemGroups() described above, but returns a new group with
*/
SMESH_Group DoubleNodeElemGroupsNew( in ListOfGroups theElems,
in ListOfGroups theNodesNot,
- in ListOfGroups theAffectedElems );
+ in ListOfGroups theAffectedElems )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements.
* Works as DoubleNodeElemGroups() described above, but returns two new groups:
in ListOfGroups theNodesNot,
in ListOfGroups theAffectedElems,
in boolean theElemGroupNeeded,
- in boolean theNodeGroupNeeded );
+ in boolean theNodeGroupNeeded )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
*/
boolean DoubleNodeElemGroupsInRegion( in ListOfGroups theElems,
in ListOfGroups theNodesNot,
- in GEOM::GEOM_Object theShape );
+ in GEOM::GEOM_Object theShape )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Identify the elements that will be affected by node duplication (actual duplication is not performed).
+ * This method is the first step of DoubleNodeElemGroupsInRegion.
+ * \param theElems - list of groups of elements (edges or faces) to be replicated
+ * \param theNodesNot - list of groups of nodes not to replicated
+ * \param theShape - shape to detect affected elements (element which geometric center
+ * located on or inside shape).
+ * The replicated nodes should be associated to affected elements.
+ * \return groups of affected elements
+ * \sa DoubleNodeElemGroupsInRegion()
+ */
+ ListOfGroups AffectedElemGroupsInRegion( in ListOfGroups theElems,
+ in ListOfGroups theNodesNot,
+ in GEOM::GEOM_Object theShape )
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Generates skin mesh (containing 2D cells) from 3D mesh
* The created 2D mesh elements based on nodes of free faces of boundary volumes
* \return TRUE if operation has been completed successfully, FALSE otherwise
*/
- boolean Make2DMeshFrom3D();
+ boolean Make2DMeshFrom3D() raises (SALOME::SALOME_Exception);
/*!
* \brief Creates missing boundary elements
in string meshName,
in boolean toCopyElements,
in boolean toCopyExistingBondary,
- out SMESH_Group group);
+ out SMESH_Group group) raises (SALOME::SALOME_Exception);
/*!
* \brief Creates missing boundary elements around either the whole mesh or
* groups of 2D elements
* Triangles are transformed in prisms, and quadrangles in hexahedrons.
* \param theDomains - list of groups of volumes
* \param createJointElems - if TRUE, create the elements
+ * \param onAllBoundaries - if TRUE, the nodes and elements are also created on
+ * the boundary between \a theDomains and the rest mesh
* \return TRUE if operation has been completed successfully, FALSE otherwise
*/
boolean DoubleNodesOnGroupBoundaries( in ListOfGroups theDomains,
- in boolean createJointElems )
+ in boolean createJointElems,
+ in boolean onAllBoundaries)
raises (SALOME::SALOME_Exception);
/*!
* \param theGroupsOfFaces - list of groups of faces
* \return TRUE if operation has been completed successfully, FALSE otherwise
*/
- boolean CreateFlatElementsOnFacesGroups( in ListOfGroups theGroupsOfFaces );
+ boolean CreateFlatElementsOnFacesGroups( in ListOfGroups theGroupsOfFaces )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief identify all the elements around a geom shape, get the faces delimiting the hole
+ * Build groups of volume to remove, groups of faces to replace on the skin of the object,
+ * groups of faces to remove insidethe object, (idem edges).
+ * Build ordered list of nodes at the border of each group of faces to replace (to be used to build a geom subshape)
+ */
+ void CreateHoleSkin(in double radius,
+ in GEOM::GEOM_Object theShape,
+ in string groupName,
+ in double_array theNodesCoords,
+ out array_of_long_array GroupsOfNodes)
+ raises (SALOME::SALOME_Exception);
};
};
