-// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
module SMESH
{
+ interface NumericalFunctor;
+
enum Bnd_Dimension { BND_2DFROM3D, BND_1DFROM3D, BND_1DFROM2D };
+
+ struct FreeBorder
+ {
+ SMESH::long_array nodeIDs; // all nodes defining a free border
+ // 1st and last node is same in a closed border
+ };
+ struct FreeBorderPart
+ {
+ short border; // border index within a sequence<FreeBorder>
+ long node1; // node index within the border-th FreeBorder
+ long node2;
+ long nodeLast;
+ };
+ typedef sequence<FreeBorder> ListOfFreeBorders;
+ typedef sequence<FreeBorderPart> FreeBordersGroup;
+ typedef sequence<FreeBordersGroup> ListOfFreeBorderGroups;
+
+ struct CoincidentFreeBorders
+ {
+ ListOfFreeBorders borders; // nodes of all free borders
+ ListOfFreeBorderGroups coincidentGroups; // groups of coincident parts of borders
+ };
+
+
+ // structure used in MakePolyLine() to define a cutting plane
+ struct PolySegment
+ {
+ // point 1: if node1ID2 > 0, then the point is in the middle of a face edge defined
+ // by two nodes, else it is at node1ID1
+ long node1ID1;
+ long node1ID2;
+
+ // point 2: if node2ID2 > 0, then the point is in the middle of a face edge defined
+ // by two nodes, else it is at node2ID1
+ long node2ID1;
+ long node2ID2;
+
+ DirStruct vector; // vector on the plane; to use a default plane set vector = (0,0,0)
+ };
+ typedef sequence<PolySegment> ListOfPolySegments;
+
+
/*!
* This interface makes modifications on the Mesh - removing elements and nodes etc.
*/
- interface NumericalFunctor;
-
interface SMESH_MeshEditor
{
+ /*!
+ * Returns a mesh subject to edition
+ */
+ SMESH_Mesh GetMesh();
+
/*!
* Return data of mesh edition preview which is computed provided
- * that the editor was obtained trough SMESH_Mesh::GetMeshEditPreviewer()
+ * that the editor was obtained through SMESH_Mesh::GetMeshEditPreviewer()
*/
MeshPreviewStruct GetPreviewData() raises (SALOME::SALOME_Exception);
/*!
* If during last operation of MeshEditor some nodes were
- * created this method returns list of their IDs, if new nodes
+ * created, this method returns list of their IDs, if new nodes
* not created - returns empty list
*/
long_array GetLastCreatedNodes() raises (SALOME::SALOME_Exception);
/*!
* If during last operation of MeshEditor some elements were
- * created this method returns list of their IDs, if new elements
+ * created, this method returns list of their IDs, if new elements
* not created - returns empty list
*/
long_array GetLastCreatedElems() raises (SALOME::SALOME_Exception);
void ClearLastCreated() raises (SALOME::SALOME_Exception);
/*!
- * \brief Returns description of an error/warning occured during the last operation
+ * \brief Returns description of an error/warning occurred during the last operation
*/
ComputeError GetLastError() raises (SALOME::SALOME_Exception);
/*!
* Create a 0D element on the given node.
* \param IdOfNode Node IDs for creation of element.
+ * \param DuplicateElements to add one more 0D element to a node or not
*/
- long Add0DElement(in long IDOfNode) raises (SALOME::SALOME_Exception);
+ long Add0DElement(in long IDOfNode,
+ in boolean DuplicateElements) raises (SALOME::SALOME_Exception);
/*!
* Create a ball element on the given node.
long AddPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
+ /*!
+ * Create a quadratic polygonal face
+ * \param IdsOfNodes - nodes of the polygon; corner nodes follow first
+ * \return long - ID of a new polygon
+ */
+ long AddQuadPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
+
/*!
* Create volume, either linear and quadratic (this is determed
* by number of given nodes).
long AddPolyhedralVolumeByFaces (in long_array IdsOfFaces) raises (SALOME::SALOME_Exception);
/*!
- * Create 0D elements on all nodes of the given object except those
- * nodes on which a 0D element already exists.
+ * Create 0D elements on all nodes of the given object.
* \param theObject object on whose nodes 0D elements will be created.
* \param theGroupName optional name of a group to add 0D elements created
* and/or found on nodes of \a theObject.
+ * \param theDuplicateElements to add one more 0D element to a node or not
* \return an object (a new group or a temporary SMESH_IDSource) holding
* ids of new and/or found 0D elements.
*/
SMESH_IDSource Create0DElementsOnAllNodes(in SMESH_IDSource theObject,
- in string theGroupName)
+ in string theGroupName,
+ in boolean theDuplicateElements)
raises (SALOME::SALOME_Exception);
/*!
* \param theFace - ID of face whose orientation is checked.
* It can be < 1 then \a thePoint is used to find a face.
* \param thePoint - is used to find a face if \a theFace < 1.
- * \return number of reoriented elements.
+ * \return number of reoriented faces.
*/
long Reorient2D(in SMESH_IDSource the2Dgroup,
in DirStruct theDirection,
in long theFace,
in PointStruct thePoint) raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Reorient faces basing on orientation of adjacent volumes.
+ * \param faces - a list of objects containing face to reorient
+ * \param volumes - an object containing volumes.
+ * \param outsideNormal - to orient faces to have their normal
+ * pointing either \a outside or \a inside the adjacent volumes.
+ * \return number of reoriented faces.
+ */
+ long Reorient2DBy3D(in ListOfIDSources faces,
+ in SMESH_IDSource volumes,
+ in boolean outsideNormal) raises (SALOME::SALOME_Exception);
/*!
* \brief Fuse neighbour triangles into quadrangles.
* \param IDsOfElements Ids of triangles to be fused.
* \param theCriterion Is used to choose a neighbour to fuse with.
* \param theMaxAngle Is a max angle between element normals at which fusion
- * is still performed; theMaxAngle is mesured in radians.
+ * is still performed; theMaxAngle is measured in radians.
* \return \c true in case of success, FALSE otherwise.
*/
boolean TriToQuad (in long_array IDsOfElements,
/*!
* \brief Split quadrangles into triangles.
- * \param theElems The faces to be splitted.
+ * \param theElems The faces to be split.
* \param the13Diag Is used to choose a diagonal for splitting.
* \return TRUE in case of success, FALSE otherwise.
*/
/*!
* Find better splitting of the given quadrangle.
- * \param IDOfQuad ID of the quadrangle to be splitted.
+ * \param IDOfQuad ID of the quadrangle to be split.
* \param Criterion A criterion to choose a diagonal for splitting.
* \return 1 if 1-3 diagonal is better, 2 if 2-4
* diagonal is better, 0 if error occurs.
* to \a facetToSplitNormal location are split, else \a facetToSplitNormal
* is used to find the facet to split in all domains present in \a elems.
*/
- void SplitHexahedraIntoPrisms(in SMESH_IDSource elems,
+ void SplitHexahedraIntoPrisms(in SMESH_IDSource elems,
in SMESH::PointStruct startHexPoint,
in SMESH::DirStruct facetToSplitNormal,
in short methodFlags,
in boolean allDomains)
raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Split bi-quadratic elements into linear ones without creation of additional nodes.
+ * - bi-quadratic triangle will be split into 3 linear quadrangles;
+ * - bi-quadratic quadrangle will be split into 4 linear quadrangles;
+ * - tri-quadratic hexahedron will be split into 8 linear hexahedra;
+ * Quadratic elements of lower dimension adjacent to the split bi-quadratic element
+ * will be split in order to keep the mesh conformal.
+ * \param elems - elements to split
+ */
+ void SplitBiQuadraticIntoLinear(in ListOfIDSources elems)
+ raises (SALOME::SALOME_Exception);
+
enum Smooth_Method { LAPLACIAN_SMOOTH, CENTROIDAL_SMOOTH };
void ConvertFromQuadraticObject(in SMESH_IDSource theObject)
raises (SALOME::SALOME_Exception);
- void ConvertToBiQuadratic(in boolean theForce3d,
+ void ConvertToBiQuadratic(in boolean theForce3d,
in SMESH_IDSource theObject)
raises (SALOME::SALOME_Exception);
void RenumberElements() raises (SALOME::SALOME_Exception);
/*!
- * \brief Genarate dim+1 elements by rotation of given elements around axis
- * \param IDsOfElements - elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweep(in long_array IDsOfElements,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepMakeGroups(in long_array IDsOfElements,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObjectMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject1D(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObject1DMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject2D(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObject2DMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Genarate dim+1 elements by extrusion of elements along vector
- * \param IDsOfElements - elements to sweep
- * \param StepVector - vector giving direction and distance of an extrusion step
- * \param NbOfSteps - number of elements to generate from one element
- */
- void ExtrusionSweep(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Genarate dim+1 elements by extrusion of elements along vector
- * \param IDsOfElements - elements to sweep
- * \param StepVector - vector giving direction and distance of an extrusion step
- * \param NbOfSteps - number of elements to generate from one element
- */
- void ExtrusionSweep0D(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups ExtrusionSweepMakeGroups(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but elements are nodes
- */
- ListOfGroups ExtrusionSweepMakeGroups0D(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- /*!
- * Generate new elements by extrusion of theElements
- * by StepVector by NbOfSteps
- * param ExtrFlags set flags for performing extrusion
- * param SewTolerance - uses for comparing locations of nodes if flag
- * EXTRUSION_FLAG_SEW is set
- */
- void AdvancedExtrusion(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps,
- in long ExtrFlags,
- in double SewTolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups AdvancedExtrusionMakeGroups(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps,
- in long ExtrFlags,
- in double SewTolerance)
- raises (SALOME::SALOME_Exception);
-
- void ExtrusionSweepObject(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionSweepObjectMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
-
- void ExtrusionSweepObject0D(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionSweepObject0DMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
-
- void ExtrusionSweepObject1D(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionSweepObject1DMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
-
- void ExtrusionSweepObject2D(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionSweepObject2DMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
+ * \brief Generate dim+1 elements by rotation of the object around axis
+ * \param Nodes - nodes to revolve: a list including groups, sub-meshes or a mesh
+ * \param Edges - edges to revolve: a list including groups, sub-meshes or a mesh
+ * \param Faces - faces to revolve: a list including groups, sub-meshes or a mesh
+ * \param Axis - rotation axis
+ * \param AngleInRadians - rotation angle
+ * \param NbOfSteps - number of elements to generate from one element
+ * \param ToMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups created if \a ToMakeGroups is true
+ */
+ ListOfGroups RotationSweepObjects(in ListOfIDSources Nodes,
+ in ListOfIDSources Edges,
+ in ListOfIDSources Faces,
+ in AxisStruct Axis,
+ in double AngleInRadians,
+ in long NbOfSteps,
+ in double Tolerance,
+ in boolean ToMakeGroups)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Generate dim+1 elements by extrusion of elements along vector
+ * \param nodes - nodes to extrude: a list including groups, sub-meshes or a mesh
+ * \param edges - edges to extrude: a list including groups, sub-meshes or a mesh
+ * \param faces - faces to extrude: a list including groups, sub-meshes or a mesh
+ * \param stepVector - vector giving direction and distance of an extrusion step
+ * \param nbOfSteps - number of elements to generate from one element
+ * \param toMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups created if \a toMakeGroups is true
+ */
+ ListOfGroups ExtrusionSweepObjects(in ListOfIDSources nodes,
+ in ListOfIDSources edges,
+ in ListOfIDSources faces,
+ in DirStruct stepVector,
+ in long nbOfSteps,
+ in double_array scaleFactors,
+ in boolean linearVariation,
+ in double_array basePoint,
+ in boolean toMakeGroups)
+ raises (SALOME::SALOME_Exception);
+
+ /*! Generates new elements by extrusion along the normal to a discretized surface or wire
+ */
+ ListOfGroups ExtrusionByNormal(in ListOfIDSources theObjects,
+ in double stepSize,
+ in long nbOfSteps,
+ in boolean byAverageNormal,
+ in boolean useInputElemsOnly,
+ in boolean makeGroups,
+ in short dim)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Generate new elements by extrusion of theElements
+ * by StepVector by NbOfSteps
+ * \param ExtrFlags set flags for performing extrusion
+ * \param SewTolerance - uses for comparing locations of nodes if flag
+ * EXTRUSION_FLAG_SEW is set
+ * \param ToMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups created if \a ToMakeGroups is true
+ */
+ ListOfGroups AdvancedExtrusion(in long_array IDsOfElements,
+ in DirStruct StepVector,
+ in long NbOfSteps,
+ in long ExtrFlags,
+ in double SewTolerance,
+ in boolean ToMakeGroups)
raises (SALOME::SALOME_Exception);
enum Extrusion_Error {
EXTR_BAD_STARTING_NODE,
EXTR_BAD_ANGLES_NUMBER,
EXTR_CANT_GET_TANGENT
- };
-
- ListOfGroups ExtrusionAlongPathX(in long_array IDsOfElements,
- in SMESH_IDSource Path,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean LinearVariation,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- in boolean MakeGroups,
- in ElementType ElemType,
- out Extrusion_Error Error)
- raises (SALOME::SALOME_Exception);
-
- ListOfGroups ExtrusionAlongPathObjX(in SMESH_IDSource theObject,
- in SMESH_IDSource Path,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean LinearVariation,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- in boolean MakeGroups,
- in ElementType ElemType,
- out Extrusion_Error Error)
- raises (SALOME::SALOME_Exception);
-
- Extrusion_Error ExtrusionAlongPath(in long_array IDsOfElements,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionAlongPathMakeGroups(in long_array IDsOfElements,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error)
- raises (SALOME::SALOME_Exception);
-
- Extrusion_Error ExtrusionAlongPathObject(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionAlongPathObjectMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error)
- raises (SALOME::SALOME_Exception);
-
- Extrusion_Error ExtrusionAlongPathObject1D(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionAlongPathObject1DMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error)
- raises (SALOME::SALOME_Exception);
-
- Extrusion_Error ExtrusionAlongPathObject2D(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionAlongPathObject2DMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error)
+ };
+
+ ListOfGroups ExtrusionAlongPathObjects(in ListOfIDSources Nodes,
+ in ListOfIDSources Edges,
+ in ListOfIDSources Faces,
+ in SMESH_IDSource Path,
+ in GEOM::GEOM_Object PathShape,
+ in long NodeStart,
+ in boolean HasAngles,
+ in double_array Angles,
+ in boolean LinearVariation,
+ in boolean HasRefPoint,
+ in PointStruct RefPoint,
+ in boolean MakeGroups,
+ out Extrusion_Error Error)
raises (SALOME::SALOME_Exception);
/*!
in AxisStruct Axis,
in double AngleInRadians,
in boolean CopyGroups,
- in string MeshName)
+ in string MeshName)
raises (SALOME::SALOME_Exception);
void RotateObject (in SMESH_IDSource theObject,
in AxisStruct Axis,
in double AngleInRadians,
- in boolean Copy)
+ in boolean Copy)
raises (SALOME::SALOME_Exception);
ListOfGroups RotateObjectMakeGroups (in SMESH_IDSource theObject,
in AxisStruct Axis,
- in double AngleInRadians)
+ in double AngleInRadians)
raises (SALOME::SALOME_Exception);
SMESH_Mesh RotateObjectMakeMesh (in SMESH_IDSource theObject,
in AxisStruct Axis,
in double AngleInRadians,
in boolean CopyGroups,
- in string MeshName)
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
+
+ SMESH_Mesh Offset(in SMESH_IDSource theObject,
+ in double Value,
+ in boolean CopyGroups,
+ in boolean CopyElements,
+ in string MeshName,
+ out ListOfGroups Groups)
raises (SALOME::SALOME_Exception);
void FindCoincidentNodes (in double Tolerance,
- out array_of_long_array GroupsOfNodes)
+ out array_of_long_array GroupsOfNodes,
+ in boolean SeparateCornersAndMedium)
raises (SALOME::SALOME_Exception);
void FindCoincidentNodesOnPart (in SMESH_IDSource SubMeshOrGroup,
in double Tolerance,
- out array_of_long_array GroupsOfNodes)
+ out array_of_long_array GroupsOfNodes,
+ in boolean SeparateCornersAndMedium)
raises (SALOME::SALOME_Exception);
void FindCoincidentNodesOnPartBut (in SMESH_IDSource SubMeshOrGroup,
in double Tolerance,
out array_of_long_array GroupsOfNodes,
- in ListOfIDSources ExceptSubMeshOrGroups)
+ in ListOfIDSources ExceptSubMeshOrGroups,
+ in boolean SeparateCornersAndMedium)
raises (SALOME::SALOME_Exception);
- void MergeNodes (in array_of_long_array GroupsOfNodes)
+ void MergeNodes (in array_of_long_array GroupsOfNodes,
+ in SMESH::ListOfIDSources NodesToKeep,
+ in boolean AvoidMakingHoles)
raises (SALOME::SALOME_Exception);
/*!
in ElementType type)
raises (SALOME::SALOME_Exception);
+ /*!
+ * Project a point to a mesh object.
+ * Return ID of an element of given type where the given point is projected
+ * and coordinates of the projection point.
+ * In the case if nothing found, return -1 and []
+ */
+ long ProjectPoint(in double x,
+ in double y,
+ in double z,
+ in SMESH_IDSource meshObject,
+ in ElementType type,
+ out double_array projecton)
+ raises (SALOME::SALOME_Exception);
+
/*!
* Return point state in a closed 2D mesh in terms of TopAbs_State enumeration.
* TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails.
*/
- short GetPointState(in double x, in double y, in double z)
+ short GetPointState(in double x, in double y, in double z)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Check if a 2D mesh is manifold
+ */
+ boolean IsManifold()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Check if orientation of 2D elements is coherent
+ */
+ boolean IsCoherentOrientation2D()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns all or only closed FreeBorder's.
+ */
+ ListOfFreeBorders FindFreeBorders(in boolean closedOnly)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Fill with 2D elements a hole defined by a FreeBorder.
+ * Optionally add new faces to a given group, which is returned.
+ */
+ SMESH_Group FillHole(in FreeBorder hole, in string groupName)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns groups of FreeBorder's coincident within the given tolerance.
+ * If the tolerance <= 0.0 then one tenth of an average size of elements adjacent
+ * to free borders being compared is used.
+ */
+ CoincidentFreeBorders FindCoincidentFreeBorders(in double tolerance);
+
+ /*!
+ * Sew FreeBorder's of each group
+ */
+ short SewCoincidentFreeBorders (in CoincidentFreeBorders freeBorders,
+ in boolean createPolygons,
+ in boolean createPolyedrs)
raises (SALOME::SALOME_Exception);
enum Sew_Error {
SEW_DIFF_NB_OF_ELEMENTS,
SEW_TOPO_DIFF_SETS_OF_ELEMENTS,
SEW_BAD_SIDE1_NODES,
- SEW_BAD_SIDE2_NODES
- };
+ SEW_BAD_SIDE2_NODES,
+ SEW_INTERNAL_ERROR
+ };
Sew_Error SewFreeBorders (in long FirstNodeID1,
in long SecondNodeID1,
* \param theElements - container of elements to duplicate.
* \param theGroupName - a name of group to contain the generated elements.
* If a group with such a name already exists, the new elements
- * are added to the existng group, else a new group is created.
+ * are added to the existing group, else a new group is created.
* If \a theGroupName is empty, new elements are not added
* in any group.
* \return a group where the new elements are added. NULL if theGroupName == "".
* Triangles are transformed in prisms, and quadrangles in hexahedrons.
* \param theDomains - list of groups of volumes
* \param createJointElems - if TRUE, create the elements
+ * \param onAllBoundaries - if TRUE, the nodes and elements are also created on
+ * the boundary between \a theDomains and the rest mesh
* \return TRUE if operation has been completed successfully, FALSE otherwise
*/
boolean DoubleNodesOnGroupBoundaries( in ListOfGroups theDomains,
- in boolean createJointElems )
+ in boolean createJointElems,
+ in boolean onAllBoundaries)
raises (SALOME::SALOME_Exception);
/*!
in GEOM::GEOM_Object theShape,
in string groupName,
in double_array theNodesCoords,
- out array_of_long_array GroupsOfNodes)
+ out array_of_long_array GroupsOfNodes)
+ raises (SALOME::SALOME_Exception);
+
+
+ /*!
+ * \brief Create a polyline consisting of 1D mesh elements each lying on a 2D element of
+ * the initial mesh. Positions of new nodes are found by cutting the mesh by the
+ * plane passing through pairs of points specified by each PolySegment structure.
+ * If there are several paths connecting a pair of points, the shortest path is
+ * selected by the module. Position of the cutting plane is defined by the two
+ * points and an optional vector lying on the plane specified by a PolySegment.
+ * By default the vector is defined by Mesh module as following. A middle point
+ * of the two given points is computed. The middle point is projected to the mesh.
+ * The vector goes from the middle point to the projection point. In case of planar
+ * mesh, the vector is normal to the mesh.
+ * \param [inout] segments - PolySegment's defining positions of cutting planes.
+ * Return the used vector which goes from the middle point to its projection.
+ * \param [in] groupName - optional name of a group where created mesh segments will
+ * be added.
+ */
+ void MakePolyLine(inout ListOfPolySegments segments,
+ in string groupName)
raises (SALOME::SALOME_Exception);
};
};
