-// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
module SMESH
{
+ interface NumericalFunctor;
+
enum Bnd_Dimension { BND_2DFROM3D, BND_1DFROM3D, BND_1DFROM2D };
+
+ struct FreeBorder
+ {
+ SMESH::long_array nodeIDs; // all nodes defining a free border
+ // 1st and last node is same in a closed border
+ };
+ struct FreeBorderPart
+ {
+ short border; // border index within a sequence<FreeBorder>
+ long node1; // node index within the border-th FreeBorder
+ long node2;
+ long nodeLast;
+ };
+ typedef sequence<FreeBorder> ListOfFreeBorders;
+ typedef sequence<FreeBorderPart> FreeBordersGroup;
+ typedef sequence<FreeBordersGroup> ListOfFreeBorderGroups;
+
+ struct CoincidentFreeBorders
+ {
+ ListOfFreeBorders borders; // nodes of all free borders
+ ListOfFreeBorderGroups coincidentGroups; // groups of coincident parts of borders
+ };
+
+
+ // structure used in MakePolyLine() to define a cutting plane
+ struct PolySegment
+ {
+ // point 1: if node1ID2 > 0, then the point is in the middle of a face edge defined
+ // by two nodes, else it is at node1ID1
+ long node1ID1;
+ long node1ID2;
+
+ // point 2: if node2ID2 > 0, then the point is in the middle of a face edge defined
+ // by two nodes, else it is at node2ID1
+ long node2ID1;
+ long node2ID2;
+
+ DirStruct vector; // vector on the plane; to use a default plane set vector = (0,0,0)
+ };
+ typedef sequence<PolySegment> ListOfPolySegments;
+
+
/*!
* This interface makes modifications on the Mesh - removing elements and nodes etc.
*/
- interface NumericalFunctor;
-
interface SMESH_MeshEditor
{
/*!
void ClearLastCreated() raises (SALOME::SALOME_Exception);
/*!
- * \brief Returns description of an error/warning occured during the last operation
+ * \brief Returns description of an error/warning occurred during the last operation
*/
ComputeError GetLastError() raises (SALOME::SALOME_Exception);
/*!
* Create a 0D element on the given node.
* \param IdOfNode Node IDs for creation of element.
+ * \param DuplicateElements to add one more 0D element to a node or not
*/
- long Add0DElement(in long IDOfNode) raises (SALOME::SALOME_Exception);
+ long Add0DElement(in long IDOfNode,
+ in boolean DuplicateElements) raises (SALOME::SALOME_Exception);
/*!
* Create a ball element on the given node.
long AddPolyhedralVolumeByFaces (in long_array IdsOfFaces) raises (SALOME::SALOME_Exception);
/*!
- * Create 0D elements on all nodes of the given object except those
- * nodes on which a 0D element already exists.
+ * Create 0D elements on all nodes of the given object.
* \param theObject object on whose nodes 0D elements will be created.
* \param theGroupName optional name of a group to add 0D elements created
* and/or found on nodes of \a theObject.
+ * \param theDuplicateElements to add one more 0D element to a node or not
* \return an object (a new group or a temporary SMESH_IDSource) holding
* ids of new and/or found 0D elements.
*/
SMESH_IDSource Create0DElementsOnAllNodes(in SMESH_IDSource theObject,
- in string theGroupName)
+ in string theGroupName,
+ in boolean theDuplicateElements)
raises (SALOME::SALOME_Exception);
/*!
* \param IDsOfElements Ids of triangles to be fused.
* \param theCriterion Is used to choose a neighbour to fuse with.
* \param theMaxAngle Is a max angle between element normals at which fusion
- * is still performed; theMaxAngle is mesured in radians.
+ * is still performed; theMaxAngle is measured in radians.
* \return \c true in case of success, FALSE otherwise.
*/
boolean TriToQuad (in long_array IDsOfElements,
/*!
* \brief Split quadrangles into triangles.
- * \param theElems The faces to be splitted.
+ * \param theElems The faces to be split.
* \param the13Diag Is used to choose a diagonal for splitting.
* \return TRUE in case of success, FALSE otherwise.
*/
/*!
* Find better splitting of the given quadrangle.
- * \param IDOfQuad ID of the quadrangle to be splitted.
+ * \param IDOfQuad ID of the quadrangle to be split.
* \param Criterion A criterion to choose a diagonal for splitting.
* \return 1 if 1-3 diagonal is better, 2 if 2-4
* diagonal is better, 0 if error occurs.
* \param NbOfSteps - number of elements to generate from one element
* \param ToMakeGroups - if true, new elements will be included into new groups
* corresponding to groups the input elements included in.
- * \return ListOfGroups - new groups craeted if \a ToMakeGroups is true
+ * \return ListOfGroups - new groups created if \a ToMakeGroups is true
*/
ListOfGroups RotationSweepObjects(in ListOfIDSources Nodes,
in ListOfIDSources Edges,
* \param nbOfSteps - number of elements to generate from one element
* \param toMakeGroups - if true, new elements will be included into new groups
* corresponding to groups the input elements included in.
- * \return ListOfGroups - new groups craeted if \a toMakeGroups is true
+ * \return ListOfGroups - new groups created if \a toMakeGroups is true
*/
ListOfGroups ExtrusionSweepObjects(in ListOfIDSources nodes,
in ListOfIDSources edges,
in ListOfIDSources faces,
in DirStruct stepVector,
in long nbOfSteps,
+ in double_array scaleFactors,
+ in boolean linearVariation,
+ in double_array basePoint,
in boolean toMakeGroups)
raises (SALOME::SALOME_Exception);
* EXTRUSION_FLAG_SEW is set
* \param ToMakeGroups - if true, new elements will be included into new groups
* corresponding to groups the input elements included in.
- * \return ListOfGroups - new groups craeted if \a ToMakeGroups is true
+ * \return ListOfGroups - new groups created if \a ToMakeGroups is true
*/
ListOfGroups AdvancedExtrusion(in long_array IDsOfElements,
in DirStruct StepVector,
in string MeshName)
raises (SALOME::SALOME_Exception);
+ SMESH_Mesh Offset(in SMESH_IDSource theObject,
+ in double Value,
+ in boolean CopyGroups,
+ in boolean CopyElements,
+ in string MeshName,
+ out ListOfGroups Groups)
+ raises (SALOME::SALOME_Exception);
+
void FindCoincidentNodes (in double Tolerance,
out array_of_long_array GroupsOfNodes,
in boolean SeparateCornersAndMedium)
in boolean SeparateCornersAndMedium)
raises (SALOME::SALOME_Exception);
- void MergeNodes (in array_of_long_array GroupsOfNodes)
+ void MergeNodes (in array_of_long_array GroupsOfNodes,
+ in SMESH::ListOfIDSources NodesToKeep,
+ in boolean AvoidMakingHoles)
raises (SALOME::SALOME_Exception);
/*!
in ElementType type)
raises (SALOME::SALOME_Exception);
+ /*!
+ * Project a point to a mesh object.
+ * Return ID of an element of given type where the given point is projected
+ * and coordinates of the projection point.
+ * In the case if nothing found, return -1 and []
+ */
+ long ProjectPoint(in double x,
+ in double y,
+ in double z,
+ in SMESH_IDSource meshObject,
+ in ElementType type,
+ out double_array projecton)
+ raises (SALOME::SALOME_Exception);
+
/*!
* Return point state in a closed 2D mesh in terms of TopAbs_State enumeration.
* TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails.
*/
- short GetPointState(in double x, in double y, in double z)
+ short GetPointState(in double x, in double y, in double z)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Check if a 2D mesh is manifold
+ */
+ boolean IsManifold()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Check if orientation of 2D elements is coherent
+ */
+ boolean IsCoherentOrientation2D()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns all or only closed FreeBorder's.
+ */
+ ListOfFreeBorders FindFreeBorders(in boolean closedOnly)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Fill with 2D elements a hole defined by a FreeBorder.
+ * Optionally add new faces to a given group, which is returned.
+ */
+ SMESH_Group FillHole(in FreeBorder hole, in string groupName)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns groups of FreeBorder's coincident within the given tolerance.
+ * If the tolerance <= 0.0 then one tenth of an average size of elements adjacent
+ * to free borders being compared is used.
+ */
+ CoincidentFreeBorders FindCoincidentFreeBorders(in double tolerance);
+
+ /*!
+ * Sew FreeBorder's of each group
+ */
+ short SewCoincidentFreeBorders (in CoincidentFreeBorders freeBorders,
+ in boolean createPolygons,
+ in boolean createPolyedrs)
raises (SALOME::SALOME_Exception);
enum Sew_Error {
SEW_DIFF_NB_OF_ELEMENTS,
SEW_TOPO_DIFF_SETS_OF_ELEMENTS,
SEW_BAD_SIDE1_NODES,
- SEW_BAD_SIDE2_NODES
- };
+ SEW_BAD_SIDE2_NODES,
+ SEW_INTERNAL_ERROR
+ };
Sew_Error SewFreeBorders (in long FirstNodeID1,
in long SecondNodeID1,
* \param theElements - container of elements to duplicate.
* \param theGroupName - a name of group to contain the generated elements.
* If a group with such a name already exists, the new elements
- * are added to the existng group, else a new group is created.
+ * are added to the existing group, else a new group is created.
* If \a theGroupName is empty, new elements are not added
* in any group.
* \return a group where the new elements are added. NULL if theGroupName == "".
in GEOM::GEOM_Object theShape,
in string groupName,
in double_array theNodesCoords,
- out array_of_long_array GroupsOfNodes)
+ out array_of_long_array GroupsOfNodes)
+ raises (SALOME::SALOME_Exception);
+
+
+ /*!
+ * \brief Create a polyline consisting of 1D mesh elements each lying on a 2D element of
+ * the initial mesh. Positions of new nodes are found by cutting the mesh by the
+ * plane passing through pairs of points specified by each PolySegment structure.
+ * If there are several paths connecting a pair of points, the shortest path is
+ * selected by the module. Position of the cutting plane is defined by the two
+ * points and an optional vector lying on the plane specified by a PolySegment.
+ * By default the vector is defined by Mesh module as following. A middle point
+ * of the two given points is computed. The middle point is projected to the mesh.
+ * The vector goes from the middle point to the projection point. In case of planar
+ * mesh, the vector is normal to the mesh.
+ * \param [inout] segments - PolySegment's defining positions of cutting planes.
+ * Return the used vector which goes from the middle point to its projection.
+ * \param [in] groupName - optional name of a group where created mesh segments will
+ * be added.
+ */
+ void MakePolyLine(inout ListOfPolySegments segments,
+ in string groupName)
raises (SALOME::SALOME_Exception);
};
};
