-// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
// File : SMESH_MeshEditor.idl
-//
#ifndef _SMESH_MESHEDITOR_IDL_
#define _SMESH_MESHEDITOR_IDL_
#include "SMESH_Mesh.idl"
+#include "SMESH_Gen.idl"
module SMESH
{
+ interface NumericalFunctor;
+
+ enum Bnd_Dimension { BND_2DFROM3D, BND_1DFROM3D, BND_1DFROM2D };
+
+
+ struct FreeBorder
+ {
+ SMESH::long_array nodeIDs; // all nodes defining a free border
+ // 1st and last node is same in a closed border
+ };
+ struct FreeBorderPart
+ {
+ short border; // border index within a sequence<FreeBorder>
+ long node1; // node index within the border-th FreeBorder
+ long node2;
+ long nodeLast;
+ };
+ typedef sequence<FreeBorder> ListOfFreeBorders;
+ typedef sequence<FreeBorderPart> FreeBordersGroup;
+ typedef sequence<FreeBordersGroup> ListOfFreeBorderGroups;
+
+ struct CoincidentFreeBorders
+ {
+ ListOfFreeBorders borders; // nodes of all free borders
+ ListOfFreeBorderGroups coincidentGroups; // groups of coincident parts of borders
+ };
+
+
+ // structure used in MakePolyLine() to define a cutting plane
+ struct PolySegment
+ {
+ // point 1: if node1ID2 > 0, then the point is in the middle of a face edge defined
+ // by two nodes, else it is at node1ID1
+ long node1ID1;
+ long node1ID2;
+
+ // point 2: if node2ID2 > 0, then the point is in the middle of a face edge defined
+ // by two nodes, else it is at node2ID1
+ long node2ID1;
+ long node2ID2;
+
+ DirStruct vector; // vector on the plane; to use a default plane set vector = (0,0,0)
+ };
+ typedef sequence<PolySegment> ListOfPolySegments;
+
+
/*!
* This interface makes modifications on the Mesh - removing elements and nodes etc.
*/
- interface NumericalFunctor;
interface SMESH_MeshEditor
{
- boolean RemoveElements(in long_array IDsOfElements);
+ /*!
+ * Returns a mesh subject to edition
+ */
+ SMESH_Mesh GetMesh();
+
+ /*!
+ * Return data of mesh edition preview which is computed provided
+ * that the editor was obtained through SMESH_Mesh::GetMeshEditPreviewer()
+ */
+ MeshPreviewStruct GetPreviewData() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * If during last operation of MeshEditor some nodes were
+ * created, this method returns list of their IDs, if new nodes
+ * not created - returns empty list
+ */
+ long_array GetLastCreatedNodes() raises (SALOME::SALOME_Exception);
- boolean RemoveNodes(in long_array IDsOfNodes);
+ /*!
+ * If during last operation of MeshEditor some elements were
+ * created, this method returns list of their IDs, if new elements
+ * not created - returns empty list
+ */
+ long_array GetLastCreatedElems() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Clears sequences of last created elements and nodes
+ */
+ void ClearLastCreated() raises (SALOME::SALOME_Exception);
- long AddNode(in double x, in double y, in double z);
+ /*!
+ * \brief Returns description of an error/warning occurred during the last operation
+ */
+ ComputeError GetLastError() raises (SALOME::SALOME_Exception);
/*!
- * Create edge, either linear and quadratic (this is determed
- * by number of given nodes).
+ * \brief Wrap a sequence of ids in a SMESH_IDSource
+ * \param IDsOfElements list of mesh elements identifiers
+ * \return new ID source object
+ */
+ SMESH_IDSource MakeIDSource(in long_array IDsOfElements, in ElementType type);
+
+ /*!
+ * \brief Remove mesh elements specified by their identifiers.
+ * \param IDsOfElements list of mesh elements identifiers
+ * \return \c true if elements are correctly removed or \c false otherwise
+ */
+ boolean RemoveElements(in long_array IDsOfElements) raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Remove mesh nodes specified by their identifiers.
+ * \param IDsOfNodes list of mesh nodes identifiers
+ * \return \c true if nodes are correctly removed or \c false otherwise
+ */
+ boolean RemoveNodes(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Remove all orphan nodes.
+ * \return number of removed nodes
+ */
+ long RemoveOrphanNodes() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Add a new node.
+ * \param x X coordinate of new node
+ * \param y Y coordinate of new node
+ * \param z Z coordinate of new node
+ * \return integer identifier of new node
+ */
+ long AddNode(in double x, in double y, in double z) raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Create a 0D element on the given node.
+ * \param IdOfNode Node IDs for creation of element.
+ * \param DuplicateElements to add one more 0D element to a node or not
+ */
+ long Add0DElement(in long IDOfNode,
+ in boolean DuplicateElements) raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Create a ball element on the given node.
+ * \param IdOfNode Node IDs for creation of element.
+ */
+ long AddBall(in long IDOfNode, in double diameter) raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Create an edge, either linear and quadratic (this is determed
+ * by number of given nodes, two or three).
* \param IdsOfNodes List of node IDs for creation of element.
* Needed order of nodes in this list corresponds to description
* of MED. This description is located by the following link:
* http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3.
*/
- long AddEdge(in long_array IDsOfNodes);
+ long AddEdge(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
/*!
* Create face, either linear and quadratic (this is determed
* of MED. This description is located by the following link:
* http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3.
*/
- long AddFace(in long_array IDsOfNodes);
+ long AddFace(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
- long AddPolygonalFace(in long_array IdsOfNodes);
+ long AddPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Create a quadratic polygonal face
+ * \param IdsOfNodes - nodes of the polygon; corner nodes follow first
+ * \return long - ID of a new polygon
+ */
+ long AddQuadPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
/*!
* Create volume, either linear and quadratic (this is determed
* of MED. This description is located by the following link:
* http://www.salome-platform.org/salome2/web_med_internet/logiciels/medV2.2.2_doc_html/html/modele_de_donnees.html#3.
*/
- long AddVolume(in long_array IDsOfNodes);
+ long AddVolume(in long_array IDsOfNodes) raises (SALOME::SALOME_Exception);
/*!
* Create volume of many faces, giving nodes for each face.
* gives quantity of nodes in face number i.
*/
long AddPolyhedralVolume (in long_array IdsOfNodes,
- in long_array Quantities);
-
+ in long_array Quantities) raises (SALOME::SALOME_Exception);
/*!
* Create volume of many faces, giving IDs of existing faces.
* \param IdsOfFaces List of face IDs for volume creation.
* \note The created volume will refer only to nodes
* of the given faces, not to the faces itself.
*/
- long AddPolyhedralVolumeByFaces (in long_array IdsOfFaces);
+ long AddPolyhedralVolumeByFaces (in long_array IdsOfFaces) raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Create 0D elements on all nodes of the given object.
+ * \param theObject object on whose nodes 0D elements will be created.
+ * \param theGroupName optional name of a group to add 0D elements created
+ * and/or found on nodes of \a theObject.
+ * \param theDuplicateElements to add one more 0D element to a node or not
+ * \return an object (a new group or a temporary SMESH_IDSource) holding
+ * ids of new and/or found 0D elements.
+ */
+ SMESH_IDSource Create0DElementsOnAllNodes(in SMESH_IDSource theObject,
+ in string theGroupName,
+ in boolean theDuplicateElements)
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Bind a node to a vertex
raises (SALOME::SALOME_Exception);
- boolean MoveNode(in long NodeID, in double x, in double y, in double z);
+ boolean MoveNode(in long NodeID, in double x, in double y, in double z)
+ raises (SALOME::SALOME_Exception);
- boolean InverseDiag(in long NodeID1, in long NodeID2);
+ boolean InverseDiag(in long NodeID1, in long NodeID2)
+ raises (SALOME::SALOME_Exception);
- boolean DeleteDiag(in long NodeID1, in long NodeID2);
+ boolean DeleteDiag(in long NodeID1, in long NodeID2)
+ raises (SALOME::SALOME_Exception);
- boolean Reorient(in long_array IDsOfElements);
+ boolean Reorient(in long_array IDsOfElements)
+ raises (SALOME::SALOME_Exception);
- boolean ReorientObject(in SMESH_IDSource theObject);
+ boolean ReorientObject(in SMESH_IDSource theObject)
+ raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Reorient faces contained in \a the2Dgroup.
+ * \param the2Dgroup - the mesh or its part to reorient
+ * \param theDirection - desired direction of normal of \a theFace
+ * \param theFace - ID of face whose orientation is checked.
+ * It can be < 1 then \a thePoint is used to find a face.
+ * \param thePoint - is used to find a face if \a theFace < 1.
+ * \return number of reoriented faces.
+ */
+ long Reorient2D(in SMESH_IDSource the2Dgroup,
+ in DirStruct theDirection,
+ in long theFace,
+ in PointStruct thePoint) raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Reorient faces basing on orientation of adjacent volumes.
+ * \param faces - a list of objects containing face to reorient
+ * \param volumes - an object containing volumes.
+ * \param outsideNormal - to orient faces to have their normal
+ * pointing either \a outside or \a inside the adjacent volumes.
+ * \return number of reoriented faces.
+ */
+ long Reorient2DBy3D(in ListOfIDSources faces,
+ in SMESH_IDSource volumes,
+ in boolean outsideNormal) raises (SALOME::SALOME_Exception);
/*!
* \brief Fuse neighbour triangles into quadrangles.
- * \param theElems The triangles to be fused.
+ * \param IDsOfElements Ids of triangles to be fused.
* \param theCriterion Is used to choose a neighbour to fuse with.
* \param theMaxAngle Is a max angle between element normals at which fusion
- * is still performed; theMaxAngle is mesured in radians.
- * \return TRUE in case of success, FALSE otherwise.
+ * is still performed; theMaxAngle is measured in radians.
+ * \return \c true in case of success, FALSE otherwise.
*/
boolean TriToQuad (in long_array IDsOfElements,
- in NumericalFunctor Criterion,
- in double MaxAngle);
-
+ in NumericalFunctor Criterion,
+ in double MaxAngle) raises (SALOME::SALOME_Exception);
/*!
* \brief Fuse neighbour triangles into quadrangles.
*
- * Behaves like the above method, taking list of elements from \a theObject
+ * Behaves like the above method, taking a list of elements from \a theObject
*/
boolean TriToQuadObject (in SMESH_IDSource theObject,
- in NumericalFunctor Criterion,
- in double MaxAngle);
+ in NumericalFunctor Criterion,
+ in double MaxAngle) raises (SALOME::SALOME_Exception);
/*!
* \brief Split quadrangles into triangles.
- * \param theElems The faces to be splitted.
+ * \param IDsOfElements Ids of quadrangles to split.
* \param theCriterion Is used to choose a diagonal for splitting.
* \return TRUE in case of success, FALSE otherwise.
*/
boolean QuadToTri (in long_array IDsOfElements,
- in NumericalFunctor Criterion);
-
+ in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception);
/*!
* \brief Split quadrangles into triangles.
*
- * Behaves like the above method, taking list of elements from \a theObject
+ * Behaves like the above method, taking a list of elements from \a theObject
*/
boolean QuadToTriObject (in SMESH_IDSource theObject,
- in NumericalFunctor Criterion);
+ in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Split each of quadrangles into 4 triangles.
+ * \param theQuads Container of quadrangles to split.
+ */
+ void QuadTo4Tri (in SMESH_IDSource theQuads) raises (SALOME::SALOME_Exception);
/*!
* \brief Split quadrangles into triangles.
- * \param theElems The faces to be splitted.
+ * \param theElems The faces to be split.
* \param the13Diag Is used to choose a diagonal for splitting.
* \return TRUE in case of success, FALSE otherwise.
*/
boolean SplitQuad (in long_array IDsOfElements,
- in boolean Diag13);
-
+ in boolean Diag13) raises (SALOME::SALOME_Exception);
/*!
* \brief Split quadrangles into triangles.
*
* Behaves like the above method, taking list of elements from \a theObject
*/
boolean SplitQuadObject (in SMESH_IDSource theObject,
- in boolean Diag13);
+ in boolean Diag13) raises (SALOME::SALOME_Exception);
/*!
* Find better splitting of the given quadrangle.
- * \param IDOfQuad ID of the quadrangle to be splitted.
+ * \param IDOfQuad ID of the quadrangle to be split.
* \param Criterion A criterion to choose a diagonal for splitting.
* \return 1 if 1-3 diagonal is better, 2 if 2-4
* diagonal is better, 0 if error occurs.
*/
long BestSplit (in long IDOfQuad,
- in NumericalFunctor Criterion);
+ in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Split volumic elements into tetrahedrons
+ * \param elems - elements to split
+ * \param methodFlags - flags passing splitting method:
+ * 1 - split the hexahedron into 5 tetrahedrons
+ * 2 - split the hexahedron into 6 tetrahedrons
+ * 3 - split the hexahedron into 24 tetrahedrons
+ */
+ void SplitVolumesIntoTetra(in SMESH_IDSource elems, in short methodFlags)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Split hexahedra into triangular prisms
+ * \param elems - elements to split
+ * \param startHexPoint - a point used to find a hexahedron for which \a facetToSplitNormal
+ * gives a normal vector defining facets to split into triangles.
+ * \param facetToSplitNormal - normal used to find a facet of hexahedron
+ * to split into triangles.
+ * \param methodFlags - flags passing splitting method:
+ * 1 - split the hexahedron into 2 prisms
+ * 2 - split the hexahedron into 4 prisms
+ * \param allDomains - if \c False, only hexahedra adjacent to one closest
+ * to \a facetToSplitNormal location are split, else \a facetToSplitNormal
+ * is used to find the facet to split in all domains present in \a elems.
+ */
+ void SplitHexahedraIntoPrisms(in SMESH_IDSource elems,
+ in SMESH::PointStruct startHexPoint,
+ in SMESH::DirStruct facetToSplitNormal,
+ in short methodFlags,
+ in boolean allDomains)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Split bi-quadratic elements into linear ones without creation of additional nodes.
+ * - bi-quadratic triangle will be split into 3 linear quadrangles;
+ * - bi-quadratic quadrangle will be split into 4 linear quadrangles;
+ * - tri-quadratic hexahedron will be split into 8 linear hexahedra;
+ * Quadratic elements of lower dimension adjacent to the split bi-quadratic element
+ * will be split in order to keep the mesh conformal.
+ * \param elems - elements to split
+ */
+ void SplitBiQuadraticIntoLinear(in ListOfIDSources elems)
+ raises (SALOME::SALOME_Exception);
+
enum Smooth_Method { LAPLACIAN_SMOOTH, CENTROIDAL_SMOOTH };
in long_array IDsOfFixedNodes,
in long MaxNbOfIterations,
in double MaxAspectRatio,
- in Smooth_Method Method);
+ in Smooth_Method Method) raises (SALOME::SALOME_Exception);
boolean SmoothObject(in SMESH_IDSource theObject,
- in long_array IDsOfFixedNodes,
- in long MaxNbOfIterations,
- in double MaxAspectRatio,
- in Smooth_Method Method);
+ in long_array IDsOfFixedNodes,
+ in long MaxNbOfIterations,
+ in double MaxAspectRatio,
+ in Smooth_Method Method) raises (SALOME::SALOME_Exception);
boolean SmoothParametric(in long_array IDsOfElements,
in long_array IDsOfFixedNodes,
in long MaxNbOfIterations,
in double MaxAspectRatio,
- in Smooth_Method Method);
+ in Smooth_Method Method) raises (SALOME::SALOME_Exception);
boolean SmoothParametricObject(in SMESH_IDSource theObject,
in long_array IDsOfFixedNodes,
in long MaxNbOfIterations,
in double MaxAspectRatio,
- in Smooth_Method Method);
-
- void ConvertToQuadratic(in boolean theForce3d);
-
- boolean ConvertFromQuadratic();
-
- void RenumberNodes();
-
- void RenumberElements();
-
- /*!
- * \brief Genarate dim+1 elements by rotation of given elements around axis
- * \param IDsOfElements - elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweep(in long_array IDsOfElements,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepMakeGroups(in long_array IDsOfElements,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObjectMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject1D(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObject1DMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject2D(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObject2DMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance);
- /*!
- * \brief Genarate dim+1 elements by extrusion of elements along vector
- * \param IDsOfElements - elements to sweep
- * \param StepVector - vector giving direction and distance of an extrusion step
- * \param NbOfSteps - number of elements to generate from one element
- */
- void ExtrusionSweep(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups ExtrusionSweepMakeGroups(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps);
- /*!
- * Generate new elements by extrusion of theElements
- * by StepVector by NbOfSteps
- * param ExtrFlags set flags for performing extrusion
- * param SewTolerance - uses for comparing locations of nodes if flag
- * EXTRUSION_FLAG_SEW is set
- */
- void AdvancedExtrusion(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps,
- in long ExtrFlags,
- in double SewTolerance);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups AdvancedExtrusionMakeGroups(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps,
- in long ExtrFlags,
- in double SewTolerance);
-
- void ExtrusionSweepObject(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
- ListOfGroups ExtrusionSweepObjectMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
-
- void ExtrusionSweepObject1D(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
- ListOfGroups ExtrusionSweepObject1DMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
-
- void ExtrusionSweepObject2D(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
- ListOfGroups ExtrusionSweepObject2DMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps);
+ in Smooth_Method Method) raises (SALOME::SALOME_Exception);
+
+ void ConvertToQuadratic(in boolean theForce3d)
+ raises (SALOME::SALOME_Exception);
+ void ConvertToQuadraticObject(in boolean theForce3d,
+ in SMESH_IDSource theObject)
+ raises (SALOME::SALOME_Exception);
+
+ boolean ConvertFromQuadratic()
+ raises (SALOME::SALOME_Exception);
+ void ConvertFromQuadraticObject(in SMESH_IDSource theObject)
+ raises (SALOME::SALOME_Exception);
+
+ void ConvertToBiQuadratic(in boolean theForce3d,
+ in SMESH_IDSource theObject)
+ raises (SALOME::SALOME_Exception);
+
+ void RenumberNodes() raises (SALOME::SALOME_Exception);
+
+ void RenumberElements() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Generate dim+1 elements by rotation of the object around axis
+ * \param Nodes - nodes to revolve: a list including groups, sub-meshes or a mesh
+ * \param Edges - edges to revolve: a list including groups, sub-meshes or a mesh
+ * \param Faces - faces to revolve: a list including groups, sub-meshes or a mesh
+ * \param Axis - rotation axis
+ * \param AngleInRadians - rotation angle
+ * \param NbOfSteps - number of elements to generate from one element
+ * \param ToMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups created if \a ToMakeGroups is true
+ */
+ ListOfGroups RotationSweepObjects(in ListOfIDSources Nodes,
+ in ListOfIDSources Edges,
+ in ListOfIDSources Faces,
+ in AxisStruct Axis,
+ in double AngleInRadians,
+ in long NbOfSteps,
+ in double Tolerance,
+ in boolean ToMakeGroups)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Generate dim+1 elements by extrusion of elements along vector
+ * \param nodes - nodes to extrude: a list including groups, sub-meshes or a mesh
+ * \param edges - edges to extrude: a list including groups, sub-meshes or a mesh
+ * \param faces - faces to extrude: a list including groups, sub-meshes or a mesh
+ * \param stepVector - vector giving direction and distance of an extrusion step
+ * \param nbOfSteps - number of elements to generate from one element
+ * \param toMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups created if \a toMakeGroups is true
+ */
+ ListOfGroups ExtrusionSweepObjects(in ListOfIDSources nodes,
+ in ListOfIDSources edges,
+ in ListOfIDSources faces,
+ in DirStruct stepVector,
+ in long nbOfSteps,
+ in double_array scaleFactors,
+ in boolean linearVariation,
+ in double_array basePoint,
+ in boolean toMakeGroups)
+ raises (SALOME::SALOME_Exception);
+
+ /*! Generates new elements by extrusion along the normal to a discretized surface or wire
+ */
+ ListOfGroups ExtrusionByNormal(in ListOfIDSources theObjects,
+ in double stepSize,
+ in long nbOfSteps,
+ in boolean byAverageNormal,
+ in boolean useInputElemsOnly,
+ in boolean makeGroups,
+ in short dim)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Generate new elements by extrusion of theElements
+ * by StepVector by NbOfSteps
+ * \param ExtrFlags set flags for performing extrusion
+ * \param SewTolerance - uses for comparing locations of nodes if flag
+ * EXTRUSION_FLAG_SEW is set
+ * \param ToMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups created if \a ToMakeGroups is true
+ */
+ ListOfGroups AdvancedExtrusion(in long_array IDsOfElements,
+ in DirStruct StepVector,
+ in long NbOfSteps,
+ in long ExtrFlags,
+ in double SewTolerance,
+ in boolean ToMakeGroups)
+ raises (SALOME::SALOME_Exception);
enum Extrusion_Error {
EXTR_OK,
EXTR_BAD_STARTING_NODE,
EXTR_BAD_ANGLES_NUMBER,
EXTR_CANT_GET_TANGENT
- };
-
- Extrusion_Error ExtrusionAlongPath(in long_array IDsOfElements,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint);
- ListOfGroups ExtrusionAlongPathMakeGroups(in long_array IDsOfElements,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error);
-
- Extrusion_Error ExtrusionAlongPathObject(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint);
- ListOfGroups ExtrusionAlongPathObjectMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error);
-
- Extrusion_Error ExtrusionAlongPathObject1D(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint);
- ListOfGroups ExtrusionAlongPathObject1DMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error);
-
- Extrusion_Error ExtrusionAlongPathObject2D(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint);
- ListOfGroups ExtrusionAlongPathObject2DMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error);
+ };
+
+ ListOfGroups ExtrusionAlongPathObjects(in ListOfIDSources Nodes,
+ in ListOfIDSources Edges,
+ in ListOfIDSources Faces,
+ in SMESH_IDSource Path,
+ in GEOM::GEOM_Object PathShape,
+ in long NodeStart,
+ in boolean HasAngles,
+ in double_array Angles,
+ in boolean LinearVariation,
+ in boolean HasRefPoint,
+ in PointStruct RefPoint,
+ in boolean MakeGroups,
+ out Extrusion_Error Error)
+ raises (SALOME::SALOME_Exception);
/*!
* Compute rotation angles for ExtrusionAlongPath as linear variation
* of given angles along path steps
- * param PathMesh mesh containing a 1D sub-mesh on the edge, along
+ * param PathMesh mesh containing a 1D sub-mesh on the edge, along
* which proceeds the extrusion
- * param PathShape is shape(edge); as the mesh can be complex, the edge
+ * param PathShape is shape(edge); as the mesh can be complex, the edge
* is used to define the sub-mesh for the path
*/
double_array LinearAnglesVariation(in SMESH_Mesh PathMesh,
void Mirror (in long_array IDsOfElements,
in AxisStruct Mirror,
in MirrorType Type,
- in boolean Copy);
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups MirrorMakeGroups (in long_array IDsOfElements,
in AxisStruct Mirror,
- in MirrorType Type);
+ in MirrorType Type)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh MirrorMakeMesh (in long_array IDsOfElements,
in AxisStruct Mirror,
in MirrorType Type,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void MirrorObject (in SMESH_IDSource theObject,
- in AxisStruct Mirror,
- in MirrorType Type,
- in boolean Copy);
+ in AxisStruct Mirror,
+ in MirrorType Type,
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups MirrorObjectMakeGroups (in SMESH_IDSource theObject,
in AxisStruct Mirror,
- in MirrorType Type);
+ in MirrorType Type)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh MirrorObjectMakeMesh (in SMESH_IDSource theObject,
in AxisStruct Mirror,
in MirrorType Type,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void Translate (in long_array IDsOfElements,
in DirStruct Vector,
- in boolean Copy);
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups TranslateMakeGroups (in long_array IDsOfElements,
- in DirStruct Vector);
+ in DirStruct Vector)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh TranslateMakeMesh (in long_array IDsOfElements,
in DirStruct Vector,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void TranslateObject (in SMESH_IDSource theObject,
- in DirStruct Vector,
- in boolean Copy);
+ in DirStruct Vector,
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups TranslateObjectMakeGroups (in SMESH_IDSource theObject,
- in DirStruct Vector);
+ in DirStruct Vector)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh TranslateObjectMakeMesh (in SMESH_IDSource theObject,
in DirStruct Vector,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
+
+ void Scale (in SMESH_IDSource theObject,
+ in PointStruct thePoint,
+ in double_array theScaleFact,
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
+ ListOfGroups ScaleMakeGroups (in SMESH_IDSource theObject,
+ in PointStruct thePoint,
+ in double_array theScaleFact)
+ raises (SALOME::SALOME_Exception);
+ SMESH_Mesh ScaleMakeMesh (in SMESH_IDSource theObject,
+ in PointStruct thePoint,
+ in double_array theScaleFact,
+ in boolean CopyGroups,
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void Rotate (in long_array IDsOfElements,
in AxisStruct Axis,
in double AngleInRadians,
- in boolean Copy);
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups RotateMakeGroups (in long_array IDsOfElements,
in AxisStruct Axis,
- in double AngleInRadians);
+ in double AngleInRadians)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh RotateMakeMesh (in long_array IDsOfElements,
in AxisStruct Axis,
in double AngleInRadians,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
void RotateObject (in SMESH_IDSource theObject,
- in AxisStruct Axis,
- in double AngleInRadians,
- in boolean Copy);
+ in AxisStruct Axis,
+ in double AngleInRadians,
+ in boolean Copy)
+ raises (SALOME::SALOME_Exception);
ListOfGroups RotateObjectMakeGroups (in SMESH_IDSource theObject,
in AxisStruct Axis,
- in double AngleInRadians);
+ in double AngleInRadians)
+ raises (SALOME::SALOME_Exception);
SMESH_Mesh RotateObjectMakeMesh (in SMESH_IDSource theObject,
in AxisStruct Axis,
in double AngleInRadians,
in boolean CopyGroups,
- in string MeshName);
+ in string MeshName)
+ raises (SALOME::SALOME_Exception);
+
+ SMESH_Mesh Offset(in SMESH_IDSource theObject,
+ in double Value,
+ in boolean CopyGroups,
+ in boolean CopyElements,
+ in string MeshName,
+ out ListOfGroups Groups)
+ raises (SALOME::SALOME_Exception);
void FindCoincidentNodes (in double Tolerance,
- out array_of_long_array GroupsOfNodes);
+ out array_of_long_array GroupsOfNodes,
+ in boolean SeparateCornersAndMedium)
+ raises (SALOME::SALOME_Exception);
void FindCoincidentNodesOnPart (in SMESH_IDSource SubMeshOrGroup,
- in double Tolerance,
- out array_of_long_array GroupsOfNodes);
+ in double Tolerance,
+ out array_of_long_array GroupsOfNodes,
+ in boolean SeparateCornersAndMedium)
+ raises (SALOME::SALOME_Exception);
- void MergeNodes (in array_of_long_array GroupsOfNodes);
+ void FindCoincidentNodesOnPartBut (in SMESH_IDSource SubMeshOrGroup,
+ in double Tolerance,
+ out array_of_long_array GroupsOfNodes,
+ in ListOfIDSources ExceptSubMeshOrGroups,
+ in boolean SeparateCornersAndMedium)
+ raises (SALOME::SALOME_Exception);
+
+ void MergeNodes (in array_of_long_array GroupsOfNodes,
+ in SMESH::ListOfIDSources NodesToKeep,
+ in boolean AvoidMakingHoles)
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Find elements built on the same nodes.
* \return List of groups of equal elements.
*/
void FindEqualElements (in SMESH_IDSource MeshOrSubMeshOrGroup,
- out array_of_long_array GroupsOfElementsID);
+ out array_of_long_array GroupsOfElementsID)
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Merge elements in each given group.
* \param GroupsOfElementsID Groups of elements for merging.
*/
- void MergeElements(in array_of_long_array GroupsOfElementsID);
+ void MergeElements(in array_of_long_array GroupsOfElementsID)
+ raises (SALOME::SALOME_Exception);
/*!
* \brief Merge equal elements in the whole mesh.
*/
- void MergeEqualElements();
-
+ void MergeEqualElements()
+ raises (SALOME::SALOME_Exception);
+
/*!
* If the given ID is a valid node ID (nodeID > 0), just move this node, else
* move the node closest to the point to point's location and return ID of the node
*/
- long MoveClosestNodeToPoint(in double x, in double y, in double z, in long nodeID);
+ long MoveClosestNodeToPoint(in double x, in double y, in double z, in long nodeID)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Return ID of node closest to a given point
+ */
+ long FindNodeClosestTo(in double x, in double y, in double z)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Return elements of given type where the given point is IN or ON.
+ *
+ * 'ALL' type means elements of any type excluding nodes and 0D elements
+ */
+ long_array FindElementsByPoint(in double x, in double y, in double z, in ElementType type)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Searching among the given elements, return elements of given type
+ * where the given point is IN or ON.
+ *
+ * 'ALL' type means elements of any type excluding nodes and 0D elements
+ */
+ long_array FindAmongElementsByPoint(in SMESH_IDSource elements,
+ in double x, in double y, in double z,
+ in ElementType type)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Project a point to a mesh object.
+ * Return ID of an element of given type where the given point is projected
+ * and coordinates of the projection point.
+ * In the case if nothing found, return -1 and []
+ */
+ long ProjectPoint(in double x,
+ in double y,
+ in double z,
+ in SMESH_IDSource meshObject,
+ in ElementType type,
+ out double_array projecton)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Return point state in a closed 2D mesh in terms of TopAbs_State enumeration.
+ * TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails.
+ */
+ short GetPointState(in double x, in double y, in double z)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Check if a 2D mesh is manifold
+ */
+ boolean IsManifold()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Check if orientation of 2D elements is coherent
+ */
+ boolean IsCoherentOrientation2D()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns all or only closed FreeBorder's.
+ */
+ ListOfFreeBorders FindFreeBorders(in boolean closedOnly)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Fill with 2D elements a hole defined by a FreeBorder.
+ * Optionally add new faces to a given group, which is returned.
+ */
+ SMESH_Group FillHole(in FreeBorder hole, in string groupName)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns groups of FreeBorder's coincident within the given tolerance.
+ * If the tolerance <= 0.0 then one tenth of an average size of elements adjacent
+ * to free borders being compared is used.
+ */
+ CoincidentFreeBorders FindCoincidentFreeBorders(in double tolerance);
+
+ /*!
+ * Sew FreeBorder's of each group
+ */
+ short SewCoincidentFreeBorders (in CoincidentFreeBorders freeBorders,
+ in boolean createPolygons,
+ in boolean createPolyedrs)
+ raises (SALOME::SALOME_Exception);
enum Sew_Error {
SEW_OK,
SEW_DIFF_NB_OF_ELEMENTS,
SEW_TOPO_DIFF_SETS_OF_ELEMENTS,
SEW_BAD_SIDE1_NODES,
- SEW_BAD_SIDE2_NODES
- };
+ SEW_BAD_SIDE2_NODES,
+ SEW_INTERNAL_ERROR
+ };
Sew_Error SewFreeBorders (in long FirstNodeID1,
in long SecondNodeID1,
in long FirstNodeID2,
in long SecondNodeID2,
in long LastNodeID2,
- in boolean CreatePolygons,
- in boolean CreatePolyedrs);
+ in boolean CreatePolygons,
+ in boolean CreatePolyedrs)
+ raises (SALOME::SALOME_Exception);
Sew_Error SewConformFreeBorders (in long FirstNodeID1,
in long SecondNodeID1,
in long LastNodeID1,
in long FirstNodeID2,
- in long SecondNodeID2);
+ in long SecondNodeID2)
+ raises (SALOME::SALOME_Exception);
Sew_Error SewBorderToSide (in long FirstNodeIDOnFreeBorder,
in long SecondNodeIDOnFreeBorder,
in long LastNodeIDOnFreeBorder,
in long FirstNodeIDOnSide,
in long LastNodeIDOnSide,
- in boolean CreatePolygons,
- in boolean CreatePolyedrs);
+ in boolean CreatePolygons,
+ in boolean CreatePolyedrs)
+ raises (SALOME::SALOME_Exception);
Sew_Error SewSideElements (in long_array IDsOfSide1Elements,
in long_array IDsOfSide2Elements,
in long NodeID1OfSide1ToMerge,
in long NodeID1OfSide2ToMerge,
in long NodeID2OfSide1ToMerge,
- in long NodeID2OfSide2ToMerge);
+ in long NodeID2OfSide2ToMerge)
+ raises (SALOME::SALOME_Exception);
/*!
* Set new nodes for given element.
* If number of nodes is not corresponded to type of
* element - returns false
*/
- boolean ChangeElemNodes(in long ide, in long_array newIDs);
-
- /*!
- * Return data of mesh edition preview which is computed provided
- * that the editor was obtained trough SMESH_Mesh::GetMeshEditPreviewer()
- */
- MeshPreviewStruct GetPreviewData();
+ boolean ChangeElemNodes(in long ide, in long_array newIDs)
+ raises (SALOME::SALOME_Exception);
- /*!
- * If during last operation of MeshEditor some nodes were
- * created this method returns list of it's IDs, if new nodes
- * not creared - returns empty list
- */
- long_array GetLastCreatedNodes();
+ /*!
+ * \brief Duplicates given elements, i.e. creates new elements based on the
+ * same nodes as the given ones.
+ * \param theElements - container of elements to duplicate.
+ * \param theGroupName - a name of group to contain the generated elements.
+ * If a group with such a name already exists, the new elements
+ * are added to the existing group, else a new group is created.
+ * If \a theGroupName is empty, new elements are not added
+ * in any group.
+ * \return a group where the new elements are added. NULL if theGroupName == "".
+ * \sa DoubleNode()
+ */
+ SMESH_Group DoubleElements( in SMESH_IDSource theElements,
+ in string theGroupName )
+ raises (SALOME::SALOME_Exception);
- /*!
- * If during last operation of MeshEditor some elements were
- * created this method returns list of it's IDs, if new elements
- * not creared - returns empty list
- */
- long_array GetLastCreatedElems();
-
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
* \param theNodes - identifiers of nodes to be doubled
- * \param theModifiedElems - identifiers of elements to be updated by the new (doubled)
- * nodes. If list of element identifiers is empty then nodes are doubled but
+ * \param theModifiedElems - identifiers of elements to be updated by the new (doubled)
+ * nodes. If list of element identifiers is empty then nodes are doubled but
* they not assigned to elements
- * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
* \sa DoubleNode(), DoubleNodeGroup(), DoubleNodeGroups()
- */
- boolean DoubleNodes( in long_array theNodes, in long_array theModifiedElems );
+ */
+ boolean DoubleNodes( in long_array theNodes, in long_array theModifiedElems )
+ raises (SALOME::SALOME_Exception);
/*!
- * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
- * This method provided for convenience works as DoubleNodes() described above.
- * \param theNodeId - identifier of node to be doubled.
- * \param theModifiedElems - identifiers of elements to be updated.
- * \return TRUE if operation has been completed successfully, FALSE otherwise
- * \sa DoubleNodes(), DoubleNodeGroup(), DoubleNodeGroups()
- */
- boolean DoubleNode( in long theNodeId, in long_array theModifiedElems );
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
+ * This method provided for convenience works as DoubleNodes() described above.
+ * \param theNodeId - identifier of node to be doubled.
+ * \param theModifiedElems - identifiers of elements to be updated.
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \sa DoubleNodes(), DoubleNodeGroup(), DoubleNodeGroups()
+ */
+ boolean DoubleNode( in long theNodeId, in long_array theModifiedElems )
+ raises (SALOME::SALOME_Exception);
/*!
- * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
- * This method provided for convenience works as DoubleNodes() described above.
- * \param theNodes - group of nodes to be doubled.
- * \param theModifiedElems - group of elements to be updated.
- * \return TRUE if operation has been completed successfully, FALSE otherwise
- * \sa DoubleNode(), DoubleNodes(), DoubleNodeGroups()
- */
- boolean DoubleNodeGroup( in SMESH_GroupBase theNodes,
- in SMESH_GroupBase theModifiedElems );
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
+ * This method provided for convenience works as DoubleNodes() described above.
+ * \param theNodes - group of nodes to be doubled.
+ * \param theModifiedElems - group of elements to be updated.
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \sa DoubleNode(), DoubleNodes(), DoubleNodeGroups(), DoubleNodeGroupNew()
+ */
+ boolean DoubleNodeGroup( in SMESH_GroupBase theNodes,
+ in SMESH_GroupBase theModifiedElems )
+ raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements.
+ * Works as DoubleNodeGroup() described above, but returns a new group with
+ * newly created nodes.
+ * \param theNodes - group of nodes to be doubled.
+ * \param theModifiedElems - group of elements to be updated.
+ * \return a new group with newly created nodes
+ * \sa DoubleNodeGroup()
+ */
+ SMESH_Group DoubleNodeGroupNew( in SMESH_GroupBase theNodes,
+ in SMESH_GroupBase theModifiedElems )
+ raises (SALOME::SALOME_Exception);
/*!
- \brief Creates a hole in a mesh by doubling the nodes of some particular elements
- This method provided for convenience works as DoubleNodes() described above.
- \param theNodes - list of groups of nodes to be doubled
- \param theModifiedElems - list of groups of elements to be updated.
- \return TRUE if operation has been completed successfully, FALSE otherwise
- \sa DoubleNode(), DoubleNodeGroup(), DoubleNodes()
- */
- boolean DoubleNodeGroups( in ListOfGroups theNodes,
- in ListOfGroups theModifiedElems );
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
+ * This method provided for convenience works as DoubleNodes() described above.
+ * \param theNodes - list of groups of nodes to be doubled
+ * \param theModifiedElems - list of groups of elements to be updated.
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \sa DoubleNode(), DoubleNodeGroup(), DoubleNodes()
+ */
+ boolean DoubleNodeGroups( in ListOfGroups theNodes,
+ in ListOfGroups theModifiedElems )
+ raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
+ * Works as DoubleNodeGroups() described above, but returns a new group with
+ * newly created nodes.
+ * \param theNodes - list of groups of nodes to be doubled
+ * \param theModifiedElems - list of groups of elements to be updated.
+ * \return a new group with newly created nodes
+ * \sa DoubleNodeGroups()
+ */
+ SMESH_Group DoubleNodeGroupsNew( in ListOfGroups theNodes,
+ in ListOfGroups theModifiedElems )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
+ * \param theElems - the list of elements (edges or faces) to be replicated
+ * The nodes for duplication could be found from these elements
+ * \param theNodesNot - list of nodes to NOT replicate
+ * \param theAffectedElems - the list of elements (cells and edges) to which the
+ * replicated nodes should be associated to.
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \sa DoubleNodeGroup(), DoubleNodeGroups()
+ */
+ boolean DoubleNodeElem( in long_array theElems,
+ in long_array theNodesNot,
+ in long_array theAffectedElems )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
+ * \param theElems - the list of elements (edges or faces) to be replicated
+ * The nodes for duplication could be found from these elements
+ * \param theNodesNot - list of nodes to NOT replicate
+ * \param theShape - shape to detect affected elements (element which geometric center
+ * located on or inside shape).
+ * The replicated nodes should be associated to affected elements.
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \sa DoubleNodeGroupInRegion(), DoubleNodeGroupsInRegion()
+ */
+ boolean DoubleNodeElemInRegion( in long_array theElems,
+ in long_array theNodesNot,
+ in GEOM::GEOM_Object theShape )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
+ * This method provided for convenience works as DoubleNodes() described above.
+ * \param theElems - group of of elements (edges or faces) to be replicated
+ * \param theNodesNot - group of nodes not to replicated
+ * \param theAffectedElems - group of elements to which the replicated nodes
+ * should be associated to.
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \sa DoubleNodes(), DoubleNodeGroups(), DoubleNodeElemGroupNew()
+ */
+ boolean DoubleNodeElemGroup( in SMESH_GroupBase theElems,
+ in SMESH_GroupBase theNodesNot,
+ in SMESH_GroupBase theAffectedElems )
+ raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements.
+ * Works as DoubleNodeElemGroup() described above, but returns a new group with
+ * newly created elements.
+ * \param theElems - group of of elements (edges or faces) to be replicated
+ * \param theNodesNot - group of nodes not to replicated
+ * \param theAffectedElems - group of elements to which the replicated nodes
+ * should be associated to.
+ * \return a new group with newly created elements
+ * \sa DoubleNodeElemGroup()
+ */
+ SMESH_Group DoubleNodeElemGroupNew( in SMESH_GroupBase theElems,
+ in SMESH_GroupBase theNodesNot,
+ in SMESH_GroupBase theAffectedElems )
+ raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements.
+ * Works as DoubleNodeElemGroup() described above, but returns two new groups:
+ * a group of newly created elements and a group of newly created nodes
+ * \param theElems - group of of elements (edges or faces) to be replicated
+ * \param theNodesNot - group of nodes not to replicated
+ * \param theAffectedElems - group of elements to which the replicated nodes
+ * should be associated to.
+ * \param theElemGroupNeeded - to create group of new elements or not
+ * \param theNodeGroupNeeded - to create group of new nodes or not
+ * \return two new groups of newly created elements (1st) and nodes (2nd)
+ * \sa DoubleNodeElemGroup()
+ */
+ ListOfGroups DoubleNodeElemGroup2New( in SMESH_GroupBase theElems,
+ in SMESH_GroupBase theNodesNot,
+ in SMESH_GroupBase theAffectedElems,
+ in boolean theElemGroupNeeded,
+ in boolean theNodeGroupNeeded)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
+ * This method provided for convenience works as DoubleNodes() described above.
+ * \param theElems - group of elements (edges or faces) to be replicated
+ * \param theNodesNot - group of nodes not to replicated
+ * \param theShape - shape to detect affected elements (element which geometric center
+ * located on or inside shape).
+ * The replicated nodes should be associated to affected elements.
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \sa DoubleNodesInRegion(), DoubleNodeGroupsInRegion()
+ */
+ boolean DoubleNodeElemGroupInRegion( in SMESH_GroupBase theElems,
+ in SMESH_GroupBase theNodesNot,
+ in GEOM::GEOM_Object theShape )
+ raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
+ * This method provided for convenience works as DoubleNodes() described above.
+ * \param theElems - list of groups of elements (edges or faces) to be replicated
+ * \param theNodesNot - list of groups of nodes not to replicated
+ * \param theAffectedElems - group of elements to which the replicated nodes
+ * should be associated to.
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \sa DoubleNodeGroup(), DoubleNodes(), DoubleNodeElemGroupsNew()
+ */
+ boolean DoubleNodeElemGroups( in ListOfGroups theElems,
+ in ListOfGroups theNodesNot,
+ in ListOfGroups theAffectedElems )
+ raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements.
+ * Works as DoubleNodeElemGroups() described above, but returns a new group with
+ * newly created elements.
+ * \param theElems - list of groups of elements (edges or faces) to be replicated
+ * \param theNodesNot - list of groups of nodes not to replicated
+ * \param theAffectedElems - group of elements to which the replicated nodes
+ * should be associated to.
+ * \return a new group with newly created elements
+ * \sa DoubleNodeElemGroups()
+ */
+ SMESH_Group DoubleNodeElemGroupsNew( in ListOfGroups theElems,
+ in ListOfGroups theNodesNot,
+ in ListOfGroups theAffectedElems )
+ raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements.
+ * Works as DoubleNodeElemGroups() described above, but returns two new groups:
+ * a group of newly created elements and a group of newly created nodes.
+ * \param theElems - list of groups of elements (edges or faces) to be replicated
+ * \param theNodesNot - list of groups of nodes not to replicated
+ * \param theAffectedElems - group of elements to which the replicated nodes
+ * should be associated to.
+ * \param theElemGroupNeeded - to create group of new elements or not
+ * \param theNodeGroupNeeded - to create group of new nodes or not
+ * \return two new groups of newly created elements (1st) and nodes (2nd)
+ * \sa DoubleNodeElemGroups()
+ */
+ ListOfGroups DoubleNodeElemGroups2New( in ListOfGroups theElems,
+ in ListOfGroups theNodesNot,
+ in ListOfGroups theAffectedElems,
+ in boolean theElemGroupNeeded,
+ in boolean theNodeGroupNeeded )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Creates a hole in a mesh by doubling the nodes of some particular elements
+ * This method provided for convenience works as DoubleNodes() described above.
+ * \param theElems - list of groups of elements (edges or faces) to be replicated
+ * \param theNodesNot - list of groups of nodes not to replicated
+ * \param theShape - shape to detect affected elements (element which geometric center
+ * located on or inside shape).
+ * The replicated nodes should be associated to affected elements.
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \sa DoubleNodeGroupInRegion(), DoubleNodesInRegion()
+ */
+ boolean DoubleNodeElemGroupsInRegion( in ListOfGroups theElems,
+ in ListOfGroups theNodesNot,
+ in GEOM::GEOM_Object theShape )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Identify the elements that will be affected by node duplication (actual duplication is not performed).
+ * This method is the first step of DoubleNodeElemGroupsInRegion.
+ * \param theElems - list of groups of elements (edges or faces) to be replicated
+ * \param theNodesNot - list of groups of nodes not to replicated
+ * \param theShape - shape to detect affected elements (element which geometric center
+ * located on or inside shape).
+ * The replicated nodes should be associated to affected elements.
+ * \return groups of affected elements
+ * \sa DoubleNodeElemGroupsInRegion()
+ */
+ ListOfGroups AffectedElemGroupsInRegion( in ListOfGroups theElems,
+ in ListOfGroups theNodesNot,
+ in GEOM::GEOM_Object theShape )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Generates skin mesh (containing 2D cells) from 3D mesh
+ * The created 2D mesh elements based on nodes of free faces of boundary volumes
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ */
+ boolean Make2DMeshFrom3D() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Creates missing boundary elements
+ * \param elements - elements whose boundary is to be checked
+ * \param dimension - defines type of boundary elements to create
+ * BND_1DFROM3D creates mesh edges on all borders of free facets of 3D elements.
+ * \param groupName - a name of group to store created boundary elements in,
+ * "" means not to create the group
+ * \param meshName - a name of new mesh to store created boundary elements in,
+ * "" means not to create the new mesh
+ * \param toCopyElements - if true, the checked elements will be copied into the new mesh
+ * else only boundary elements will be copied into the new mesh
+ * \param toCopyExistingBondary - if true, not only new but also pre-existing
+ * boundary elements will be copied into the new mesh
+ * \param group - returns the create group, if any
+ * \retval SMESH::SMESH_Mesh - the mesh where elements were added to
+ */
+ SMESH_Mesh MakeBoundaryMesh(in SMESH_IDSource elements,
+ in Bnd_Dimension dimension,
+ in string groupName,
+ in string meshName,
+ in boolean toCopyElements,
+ in boolean toCopyExistingBondary,
+ out SMESH_Group group) raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Creates missing boundary elements around either the whole mesh or
+ * groups of 2D elements
+ * \param dimension - defines type of boundary elements to create
+ * \param groupName - a name of group to store all boundary elements in,
+ * "" means not to create the group
+ * \param meshName - a name of a new mesh, which is a copy of the initial
+ * mesh + created boundary elements; "" means not to create the new mesh
+ * \param toCopyAll - if true, the whole initial mesh will be copied into
+ * the new mesh else only boundary elements will be copied into the new mesh
+ * \param groups - optional groups of 2D elements to make boundary around
+ * \param mesh - returns the mesh where elements were added to
+ * \param group - returns the created group, if any
+ * \retval long - number of added boundary elements
+ */
+ long MakeBoundaryElements(in Bnd_Dimension dimension,
+ in string groupName,
+ in string meshName,
+ in boolean toCopyAll,
+ in ListOfIDSources groups,
+ out SMESH_Mesh mesh,
+ out SMESH_Group group) raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Double nodes on shared faces between groups of volumes and create flat elements on demand.
+ * Flat elements are mainly used by some types of mechanic calculations.
+ *
+ * The list of groups must describe a partition of the mesh volumes.
+ * The nodes of the internal faces at the boundaries of the groups are doubled.
+ * In option, the internal faces are replaced by flat elements.
+ * Triangles are transformed in prisms, and quadrangles in hexahedrons.
+ * \param theDomains - list of groups of volumes
+ * \param createJointElems - if TRUE, create the elements
+ * \param onAllBoundaries - if TRUE, the nodes and elements are also created on
+ * the boundary between \a theDomains and the rest mesh
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ */
+ boolean DoubleNodesOnGroupBoundaries( in ListOfGroups theDomains,
+ in boolean createJointElems,
+ in boolean onAllBoundaries)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Double nodes on some external faces and create flat elements.
+ * Flat elements are mainly used by some types of mechanic calculations.
+ *
+ * Each group of the list must be constituted of faces.
+ * Triangles are transformed in prisms, and quadrangles in hexahedrons.
+ * \param theGroupsOfFaces - list of groups of faces
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
+ */
+ boolean CreateFlatElementsOnFacesGroups( in ListOfGroups theGroupsOfFaces )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief identify all the elements around a geom shape, get the faces delimiting the hole
+ * Build groups of volume to remove, groups of faces to replace on the skin of the object,
+ * groups of faces to remove insidethe object, (idem edges).
+ * Build ordered list of nodes at the border of each group of faces to replace (to be used to build a geom subshape)
+ */
+ void CreateHoleSkin(in double radius,
+ in GEOM::GEOM_Object theShape,
+ in string groupName,
+ in double_array theNodesCoords,
+ out array_of_long_array GroupsOfNodes)
+ raises (SALOME::SALOME_Exception);
+
+
+ /*!
+ * \brief Create a polyline consisting of 1D mesh elements each lying on a 2D element of
+ * the initial mesh. Positions of new nodes are found by cutting the mesh by the
+ * plane passing through pairs of points specified by each PolySegment structure.
+ * If there are several paths connecting a pair of points, the shortest path is
+ * selected by the module. Position of the cutting plane is defined by the two
+ * points and an optional vector lying on the plane specified by a PolySegment.
+ * By default the vector is defined by Mesh module as following. A middle point
+ * of the two given points is computed. The middle point is projected to the mesh.
+ * The vector goes from the middle point to the projection point. In case of planar
+ * mesh, the vector is normal to the mesh.
+ * \param [inout] segments - PolySegment's defining positions of cutting planes.
+ * Return the used vector which goes from the middle point to its projection.
+ * \param [in] groupName - optional name of a group where created mesh segments will
+ * be added.
+ */
+ void MakePolyLine(inout ListOfPolySegments segments,
+ in string groupName)
+ raises (SALOME::SALOME_Exception);
};
};
