-// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
interface SMESH_MeshEditor
{
+ /*!
+ * Returns a mesh subject to edition
+ */
+ SMESH_Mesh GetMesh();
+
/*!
* Return data of mesh edition preview which is computed provided
- * that the editor was obtained trough SMESH_Mesh::GetMeshEditPreviewer()
+ * that the editor was obtained through SMESH_Mesh::GetMeshEditPreviewer()
*/
MeshPreviewStruct GetPreviewData() raises (SALOME::SALOME_Exception);
/*!
* If during last operation of MeshEditor some nodes were
- * created this method returns list of their IDs, if new nodes
+ * created, this method returns list of their IDs, if new nodes
* not created - returns empty list
*/
long_array GetLastCreatedNodes() raises (SALOME::SALOME_Exception);
/*!
* If during last operation of MeshEditor some elements were
- * created this method returns list of their IDs, if new elements
+ * created, this method returns list of their IDs, if new elements
* not created - returns empty list
*/
long_array GetLastCreatedElems() raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Clears sequences of last created elements and nodes
+ */
+ void ClearLastCreated() raises (SALOME::SALOME_Exception);
+
/*!
* \brief Returns description of an error/warning occured during the last operation
*/
long AddPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
+ /*!
+ * Create a quadratic polygonal face
+ * \param IdsOfNodes - nodes of the polygon; corner nodes follow first
+ * \return long - ID of a new polygon
+ */
+ long AddQuadPolygonalFace(in long_array IdsOfNodes) raises (SALOME::SALOME_Exception);
+
/*!
* Create volume, either linear and quadratic (this is determed
* by number of given nodes).
* \param theFace - ID of face whose orientation is checked.
* It can be < 1 then \a thePoint is used to find a face.
* \param thePoint - is used to find a face if \a theFace < 1.
- * \return number of reoriented elements.
+ * \return number of reoriented faces.
*/
long Reorient2D(in SMESH_IDSource the2Dgroup,
in DirStruct theDirection,
in long theFace,
in PointStruct thePoint) raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Reorient faces basing on orientation of adjacent volumes.
+ * \param faces - a list of objects containing face to reorient
+ * \param volumes - an object containing volumes.
+ * \param outsideNormal - to orient faces to have their normal
+ * pointing either \a outside or \a inside the adjacent volumes.
+ * \return number of reoriented faces.
+ */
+ long Reorient2DBy3D(in ListOfIDSources faces,
+ in SMESH_IDSource volumes,
+ in boolean outsideNormal) raises (SALOME::SALOME_Exception);
/*!
* \brief Fuse neighbour triangles into quadrangles.
- * \param theElems The triangles to be fused.
+ * \param IDsOfElements Ids of triangles to be fused.
* \param theCriterion Is used to choose a neighbour to fuse with.
* \param theMaxAngle Is a max angle between element normals at which fusion
* is still performed; theMaxAngle is mesured in radians.
- * \return TRUE in case of success, FALSE otherwise.
+ * \return \c true in case of success, FALSE otherwise.
*/
boolean TriToQuad (in long_array IDsOfElements,
in NumericalFunctor Criterion,
in double MaxAngle) raises (SALOME::SALOME_Exception);
-
/*!
* \brief Fuse neighbour triangles into quadrangles.
*
- * Behaves like the above method, taking list of elements from \a theObject
+ * Behaves like the above method, taking a list of elements from \a theObject
*/
boolean TriToQuadObject (in SMESH_IDSource theObject,
in NumericalFunctor Criterion,
/*!
* \brief Split quadrangles into triangles.
- * \param theElems The faces to be splitted.
+ * \param IDsOfElements Ids of quadrangles to split.
* \param theCriterion Is used to choose a diagonal for splitting.
* \return TRUE in case of success, FALSE otherwise.
*/
boolean QuadToTri (in long_array IDsOfElements,
in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception);
-
/*!
* \brief Split quadrangles into triangles.
*
- * Behaves like the above method, taking list of elements from \a theObject
+ * Behaves like the above method, taking a list of elements from \a theObject
*/
boolean QuadToTriObject (in SMESH_IDSource theObject,
in NumericalFunctor Criterion) raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Split each of quadrangles into 4 triangles.
+ * \param theQuads Container of quadrangles to split.
+ */
+ void QuadTo4Tri (in SMESH_IDSource theQuads) raises (SALOME::SALOME_Exception);
/*!
* \brief Split quadrangles into triangles.
*/
boolean SplitQuad (in long_array IDsOfElements,
in boolean Diag13) raises (SALOME::SALOME_Exception);
-
/*!
* \brief Split quadrangles into triangles.
*
void SplitVolumesIntoTetra(in SMESH_IDSource elems, in short methodFlags)
raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Split hexahedra into triangular prisms
+ * \param elems - elements to split
+ * \param startHexPoint - a point used to find a hexahedron for which \a facetToSplitNormal
+ * gives a normal vector defining facets to split into triangles.
+ * \param facetToSplitNormal - normal used to find a facet of hexahedron
+ * to split into triangles.
+ * \param methodFlags - flags passing splitting method:
+ * 1 - split the hexahedron into 2 prisms
+ * 2 - split the hexahedron into 4 prisms
+ * \param allDomains - if \c False, only hexahedra adjacent to one closest
+ * to \a facetToSplitNormal location are split, else \a facetToSplitNormal
+ * is used to find the facet to split in all domains present in \a elems.
+ */
+ void SplitHexahedraIntoPrisms(in SMESH_IDSource elems,
+ in SMESH::PointStruct startHexPoint,
+ in SMESH::DirStruct facetToSplitNormal,
+ in short methodFlags,
+ in boolean allDomains)
+ raises (SALOME::SALOME_Exception);
+
enum Smooth_Method { LAPLACIAN_SMOOTH, CENTROIDAL_SMOOTH };
void ConvertFromQuadraticObject(in SMESH_IDSource theObject)
raises (SALOME::SALOME_Exception);
- void ConvertToBiQuadratic(in boolean theForce3d,
+ void ConvertToBiQuadratic(in boolean theForce3d,
in SMESH_IDSource theObject)
raises (SALOME::SALOME_Exception);
void RenumberElements() raises (SALOME::SALOME_Exception);
/*!
- * \brief Genarate dim+1 elements by rotation of given elements around axis
- * \param IDsOfElements - elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweep(in long_array IDsOfElements,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepMakeGroups(in long_array IDsOfElements,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObjectMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject1D(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObject1DMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Genarate dim+1 elements by rotation of the object around axis
- * \param theObject - object containing elements to ratate
- * \param Axix - rotation axis
- * \param AngleInRadians - rotation angle
- * \param NbOfSteps - number of elements to generate from one element
- */
- void RotationSweepObject2D(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups RotationSweepObject2DMakeGroups(in SMESH_IDSource theObject,
- in AxisStruct Axix,
- in double AngleInRadians,
- in long NbOfSteps,
- in double Tolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Genarate dim+1 elements by extrusion of elements along vector
- * \param IDsOfElements - elements to sweep
- * \param StepVector - vector giving direction and distance of an extrusion step
- * \param NbOfSteps - number of elements to generate from one element
- */
- void ExtrusionSweep(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Genarate dim+1 elements by extrusion of elements along vector
- * \param IDsOfElements - elements to sweep
- * \param StepVector - vector giving direction and distance of an extrusion step
- * \param NbOfSteps - number of elements to generate from one element
- */
- void ExtrusionSweep0D(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups ExtrusionSweepMakeGroups(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but elements are nodes
- */
- ListOfGroups ExtrusionSweepMakeGroups0D(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- /*!
- * Generate new elements by extrusion of theElements
- * by StepVector by NbOfSteps
- * param ExtrFlags set flags for performing extrusion
- * param SewTolerance - uses for comparing locations of nodes if flag
- * EXTRUSION_FLAG_SEW is set
- */
- void AdvancedExtrusion(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps,
- in long ExtrFlags,
- in double SewTolerance)
- raises (SALOME::SALOME_Exception);
- /*!
- * \brief Same as previous but additionally create groups of elements
- * generated from elements belonging to preexisting groups
- */
- ListOfGroups AdvancedExtrusionMakeGroups(in long_array IDsOfElements,
- in DirStruct StepVector,
- in long NbOfSteps,
- in long ExtrFlags,
- in double SewTolerance)
- raises (SALOME::SALOME_Exception);
-
- void ExtrusionSweepObject(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionSweepObjectMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
-
- void ExtrusionSweepObject0D(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionSweepObject0DMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
-
- void ExtrusionSweepObject1D(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionSweepObject1DMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
-
- void ExtrusionSweepObject2D(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionSweepObject2DMakeGroups(in SMESH_IDSource theObject,
- in DirStruct StepVector,
- in long NbOfSteps)
+ * \brief Generate dim+1 elements by rotation of the object around axis
+ * \param Nodes - nodes to revolve: a list including groups, sub-meshes or a mesh
+ * \param Edges - edges to revolve: a list including groups, sub-meshes or a mesh
+ * \param Faces - faces to revolve: a list including groups, sub-meshes or a mesh
+ * \param Axis - rotation axis
+ * \param AngleInRadians - rotation angle
+ * \param NbOfSteps - number of elements to generate from one element
+ * \param ToMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups craeted if \a ToMakeGroups is true
+ */
+ ListOfGroups RotationSweepObjects(in ListOfIDSources Nodes,
+ in ListOfIDSources Edges,
+ in ListOfIDSources Faces,
+ in AxisStruct Axis,
+ in double AngleInRadians,
+ in long NbOfSteps,
+ in double Tolerance,
+ in boolean ToMakeGroups)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * \brief Generate dim+1 elements by extrusion of elements along vector
+ * \param nodes - nodes to extrude: a list including groups, sub-meshes or a mesh
+ * \param edges - edges to extrude: a list including groups, sub-meshes or a mesh
+ * \param faces - faces to extrude: a list including groups, sub-meshes or a mesh
+ * \param stepVector - vector giving direction and distance of an extrusion step
+ * \param nbOfSteps - number of elements to generate from one element
+ * \param toMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups craeted if \a toMakeGroups is true
+ */
+ ListOfGroups ExtrusionSweepObjects(in ListOfIDSources nodes,
+ in ListOfIDSources edges,
+ in ListOfIDSources faces,
+ in DirStruct stepVector,
+ in long nbOfSteps,
+ in boolean toMakeGroups)
+ raises (SALOME::SALOME_Exception);
+
+ /*! Generates new elements by extrusion along the normal to a discretized surface or wire
+ */
+ ListOfGroups ExtrusionByNormal(in ListOfIDSources theObjects,
+ in double stepSize,
+ in long nbOfSteps,
+ in boolean byAverageNormal,
+ in boolean useInputElemsOnly,
+ in boolean makeGroups,
+ in short dim)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Generate new elements by extrusion of theElements
+ * by StepVector by NbOfSteps
+ * \param ExtrFlags set flags for performing extrusion
+ * \param SewTolerance - uses for comparing locations of nodes if flag
+ * EXTRUSION_FLAG_SEW is set
+ * \param ToMakeGroups - if true, new elements will be included into new groups
+ * corresponding to groups the input elements included in.
+ * \return ListOfGroups - new groups craeted if \a ToMakeGroups is true
+ */
+ ListOfGroups AdvancedExtrusion(in long_array IDsOfElements,
+ in DirStruct StepVector,
+ in long NbOfSteps,
+ in long ExtrFlags,
+ in double SewTolerance,
+ in boolean ToMakeGroups)
raises (SALOME::SALOME_Exception);
enum Extrusion_Error {
EXTR_BAD_STARTING_NODE,
EXTR_BAD_ANGLES_NUMBER,
EXTR_CANT_GET_TANGENT
- };
-
- ListOfGroups ExtrusionAlongPathX(in long_array IDsOfElements,
- in SMESH_IDSource Path,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean LinearVariation,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- in boolean MakeGroups,
- in ElementType ElemType,
- out Extrusion_Error Error)
- raises (SALOME::SALOME_Exception);
-
- ListOfGroups ExtrusionAlongPathObjX(in SMESH_IDSource theObject,
- in SMESH_IDSource Path,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean LinearVariation,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- in boolean MakeGroups,
- in ElementType ElemType,
- out Extrusion_Error Error)
- raises (SALOME::SALOME_Exception);
-
- Extrusion_Error ExtrusionAlongPath(in long_array IDsOfElements,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionAlongPathMakeGroups(in long_array IDsOfElements,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error)
- raises (SALOME::SALOME_Exception);
-
- Extrusion_Error ExtrusionAlongPathObject(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionAlongPathObjectMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error)
- raises (SALOME::SALOME_Exception);
-
- Extrusion_Error ExtrusionAlongPathObject1D(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionAlongPathObject1DMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error)
- raises (SALOME::SALOME_Exception);
-
- Extrusion_Error ExtrusionAlongPathObject2D(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint)
- raises (SALOME::SALOME_Exception);
- ListOfGroups ExtrusionAlongPathObject2DMakeGroups(in SMESH_IDSource theObject,
- in SMESH_Mesh PathMesh,
- in GEOM::GEOM_Object PathShape,
- in long NodeStart,
- in boolean HasAngles,
- in double_array Angles,
- in boolean HasRefPoint,
- in PointStruct RefPoint,
- out Extrusion_Error Error)
+ };
+
+ ListOfGroups ExtrusionAlongPathObjects(in ListOfIDSources Nodes,
+ in ListOfIDSources Edges,
+ in ListOfIDSources Faces,
+ in SMESH_IDSource Path,
+ in GEOM::GEOM_Object PathShape,
+ in long NodeStart,
+ in boolean HasAngles,
+ in double_array Angles,
+ in boolean LinearVariation,
+ in boolean HasRefPoint,
+ in PointStruct RefPoint,
+ in boolean MakeGroups,
+ out Extrusion_Error Error)
raises (SALOME::SALOME_Exception);
/*!
in AxisStruct Axis,
in double AngleInRadians,
in boolean CopyGroups,
- in string MeshName)
+ in string MeshName)
raises (SALOME::SALOME_Exception);
void RotateObject (in SMESH_IDSource theObject,
in AxisStruct Axis,
in double AngleInRadians,
- in boolean Copy)
+ in boolean Copy)
raises (SALOME::SALOME_Exception);
ListOfGroups RotateObjectMakeGroups (in SMESH_IDSource theObject,
in AxisStruct Axis,
- in double AngleInRadians)
+ in double AngleInRadians)
raises (SALOME::SALOME_Exception);
SMESH_Mesh RotateObjectMakeMesh (in SMESH_IDSource theObject,
in AxisStruct Axis,
in double AngleInRadians,
in boolean CopyGroups,
- in string MeshName)
+ in string MeshName)
raises (SALOME::SALOME_Exception);
void FindCoincidentNodes (in double Tolerance,
- out array_of_long_array GroupsOfNodes)
+ out array_of_long_array GroupsOfNodes,
+ in boolean SeparateCornersAndMedium)
raises (SALOME::SALOME_Exception);
void FindCoincidentNodesOnPart (in SMESH_IDSource SubMeshOrGroup,
in double Tolerance,
- out array_of_long_array GroupsOfNodes)
+ out array_of_long_array GroupsOfNodes,
+ in boolean SeparateCornersAndMedium)
raises (SALOME::SALOME_Exception);
void FindCoincidentNodesOnPartBut (in SMESH_IDSource SubMeshOrGroup,
in double Tolerance,
out array_of_long_array GroupsOfNodes,
- in ListOfIDSources ExceptSubMeshOrGroups)
+ in ListOfIDSources ExceptSubMeshOrGroups,
+ in boolean SeparateCornersAndMedium)
raises (SALOME::SALOME_Exception);
- void MergeNodes (in array_of_long_array GroupsOfNodes)
+ void MergeNodes (in array_of_long_array GroupsOfNodes)
raises (SALOME::SALOME_Exception);
/*!
boolean ChangeElemNodes(in long ide, in long_array newIDs)
raises (SALOME::SALOME_Exception);
+ /*!
+ * \brief Duplicates given elements, i.e. creates new elements based on the
+ * same nodes as the given ones.
+ * \param theElements - container of elements to duplicate.
+ * \param theGroupName - a name of group to contain the generated elements.
+ * If a group with such a name already exists, the new elements
+ * are added to the existng group, else a new group is created.
+ * If \a theGroupName is empty, new elements are not added
+ * in any group.
+ * \return a group where the new elements are added. NULL if theGroupName == "".
+ * \sa DoubleNode()
+ */
+ SMESH_Group DoubleElements( in SMESH_IDSource theElements,
+ in string theGroupName )
+ raises (SALOME::SALOME_Exception);
+
/*!
* \brief Creates a hole in a mesh by doubling the nodes of some particular elements
* \param theNodes - identifiers of nodes to be doubled
* \param theModifiedElems - identifiers of elements to be updated by the new (doubled)
* nodes. If list of element identifiers is empty then nodes are doubled but
* they not assigned to elements
- * \return TRUE if operation has been completed successfully, FALSE otherwise
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
* \sa DoubleNode(), DoubleNodeGroup(), DoubleNodeGroups()
*/
boolean DoubleNodes( in long_array theNodes, in long_array theModifiedElems )
* Triangles are transformed in prisms, and quadrangles in hexahedrons.
* \param theDomains - list of groups of volumes
* \param createJointElems - if TRUE, create the elements
+ * \param onAllBoundaries - if TRUE, the nodes and elements are also created on
+ * the boundary between \a theDomains and the rest mesh
* \return TRUE if operation has been completed successfully, FALSE otherwise
*/
boolean DoubleNodesOnGroupBoundaries( in ListOfGroups theDomains,
- in boolean createJointElems )
+ in boolean createJointElems,
+ in boolean onAllBoundaries)
raises (SALOME::SALOME_Exception);
/*!
