// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
//
//
//
ADD_EDGE,
ADD_TRIANGLE,
ADD_QUADRANGLE,
+ ADD_POLYGON,
ADD_TETRAHEDRON,
ADD_PYRAMID,
ADD_PRISM,
ADD_HEXAHEDRON,
+ ADD_POLYHEDRON,
REMOVE_NODE,
REMOVE_ELEMENT,
MOVE_NODE,
CHANGE_ELEMENT_NODES,
+ CHANGE_POLYHEDRON_NODES,
RENUMBER
};
long_array indexes;
};
- struct PointStruct { double x;
- double y;
- double z; } ;
+ struct PointStruct { double x;
+ double y;
+ double z; } ;
struct DirStruct { PointStruct PS ; } ; // analog to Occ Direction
-
+
struct AxisStruct { double x;
double y;
double z;
double vy;
double vz; } ;
-
+
/*!
* Enumeration for element type, like in SMDS
*/
FACE,
VOLUME
};
-
+
/*!
- * Enumeration for hypothesis status (used by AddHypothesis() and RemoveHypothesis() methods)
- */
+ * Enumeration for hypothesis status (used by AddHypothesis() and RemoveHypothesis() methods)
+ */
enum Hypothesis_Status // in the order of severity
{
HYP_OK,
HYP_NOTCONFORM, // not conform mesh is produced appling a hypothesis
HYP_ALREADY_EXIST,// such hypothesis already exist
HYP_BAD_DIM // bad dimension
- };
-
+ };
+
/*!
* Enumeration for DriverMED read status (used by ImportMEDFile() method)
- */
+ */
enum DriverMED_ReadStatus // in the order of severity
{
DRS_OK,
// so the numbers from the file are ignored
DRS_WARN_SKIP_ELEM, // some elements were skipped due to incorrect file data
DRS_FAIL // general failure (exception etc.)
- };
+ };
/*!
* Enumeration for DriverMED (used by Perform() method)
- */
+ */
enum MED_VERSION // in the order of severity
{
MED_V2_1,
typedef sequence<log_block> log_array;
+ /*!
+ * Auxilary flags for advanced extrusion.
+ * BOUNDARY: create or not boundary for result of extrusion
+ * SEW: try to use existing nodes or create new nodes in any case
+ */
+ const long EXTRUSION_FLAG_BOUNDARY = 1;
+ const long EXTRUSION_FLAG_SEW = 2;
+
interface SMESH_IDSource
{
/*!
*/
long_array GetIDs();
};
-
+
interface SMESH_GroupBase;
interface SMESH_Group;
interface SMESH_GroupOnGeom;
interface SMESH_MeshEditor;
interface SMESH_Mesh : SALOME::GenericObj, SMESH_IDSource
{
- /*!
- * Associate a Shape to a Mesh created with NewEmpty
- */
-
-// boolean SetMesh(in GEOM::GEOM_Object anObject)
-// raises (SALOME::SALOME_Exception);
+ ///*!
+ // * Associate a Shape to a Mesh created with NewEmpty
+ // */
+ //boolean SetMesh(in GEOM::GEOM_Object anObject)
+ // raises (SALOME::SALOME_Exception);
/*!
* Get the subMesh object associated to a subShape. The subMesh object
* gives access to nodes and elements IDs.
- * SubMesh will be used instead of SubShape in a next idl version to
+ * SubMesh will be used instead of SubShape in a next idl version to
* adress a specific subMesh...
*/
SMESH_subMesh GetSubMesh(in GEOM::GEOM_Object aSubObject, in string name)
raises (SALOME::SALOME_Exception);
- /*!
- * Create a subMesh without reference to a subShape
- */
-// SMESH_subMesh NewEmpty()
-// raises (SALOME::SALOME_Exception);
+ ///*!
+ // * Create a subMesh without reference to a subShape
+ // */
+ //SMESH_subMesh NewEmpty()
+ // raises (SALOME::SALOME_Exception);
/*!
* Get geom shape to mesh. A result may be nil
void RemoveGroup(in SMESH_GroupBase aGroup)
raises (SALOME::SALOME_Exception);
- /*!
+ /*!
* Remove group with its contents
*/
void RemoveGroupWithContents( in SMESH_GroupBase aGroup )
- raises (SALOME::SALOME_Exception);
+ raises (SALOME::SALOME_Exception);
/*!
* Union of two groups
- * New group is created. All mesh elements that are
+ * New group is created. All mesh elements that are
* present in initial groups are added to the new one
*/
SMESH_Group UnionGroups (in SMESH_GroupBase aGroup1,
in SMESH_GroupBase aGroup2,
in string name )
- raises (SALOME::SALOME_Exception);
+ raises (SALOME::SALOME_Exception);
/*!
* Intersection of two groups
- * New group is created. All mesh elements that are
+ * New group is created. All mesh elements that are
* present in both initial groups are added to the new one.
*/
SMESH_Group IntersectGroups (in SMESH_GroupBase aGroup1,
in SMESH_GroupBase aGroup2,
in string name )
- raises (SALOME::SALOME_Exception);
-
- /*!
- * Cut of two groups
- * New group is created. All mesh elements that are present in
- * main group but do not present in tool group are added to the new one
- */
- SMESH_Group CutGroups (in SMESH_GroupBase aMainGroup,
- in SMESH_GroupBase aToolGroup,
- in string name )
- raises (SALOME::SALOME_Exception);
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Cut of two groups
+ * New group is created. All mesh elements that are present in
+ * main group but do not present in tool group are added to the new one
+ */
+ SMESH_Group CutGroups (in SMESH_GroupBase aMainGroup,
+ in SMESH_GroupBase aToolGroup,
+ in string name )
+ raises (SALOME::SALOME_Exception);
/*!
* Add hypothesis to the mesh, under a particular subShape
* @params
* - aSubShape : subShape obtained by a shape explode in GEOM
* (or main shape)
- * - anHyp : hypothesis object
+ * - anHyp : hypothesis object
* @return
- * - OK if the hypothesis is compatible with the subShape
+ * - OK if the hypothesis is compatible with the subShape
* (and all previous hypothesis on the subShape)
* - NOK if the hypothesis is not compatible with the subShape
* (or one previous hypothesis on the subShape)
// boolean AddHypothesis(in SMESH_subMesh aSubMesh, in SMESH_Hypothesis anHyp)
// raises (SALOME::SALOME_Exception);
-
/*!
* Remove an hypothesis previouly added with AddHypothesis.
*/
raises (SALOME::SALOME_Exception);
/*!
- * Get the internal Id
+ * Get the internal Id
*/
- long GetId();
+ long GetId();
/*!
- * Get the study Id
+ * Get the study Id
*/
- long GetStudyId();
-
- SMESH_MeshEditor GetMeshEditor()
- raises (SALOME::SALOME_Exception);
+ long GetStudyId();
+
+ /*!
+ * Obtain instance of SMESH_MeshEditor
+ */
+ SMESH_MeshEditor GetMeshEditor()
+ raises (SALOME::SALOME_Exception);
/*!
- * Export Mesh to MED Formats
+ * Export Mesh to different MED Formats
* @params
* - auto_groups : boolean parameter for creating/not creating
* the groups Group_On_All_Nodes, Group_On_All_Faces, ... ;
* the typical use is auto_groups=false.
+ * - theVersion : define the version of format of MED file, that will be created
*/
void ExportToMED( in string file, in boolean auto_groups, in MED_VERSION theVersion )
raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Export Mesh to MED_V2_1 MED format
+ * Works, just the same as ExportToMED, with MED_VERSION parameter equal to MED_V2_1.
+ * The method is kept in order to support old functionality
+ */
void ExportMED( in string file, in boolean auto_groups )
raises (SALOME::SALOME_Exception);
SALOME_MED::MESH GetMEDMesh()
raises (SALOME::SALOME_Exception);
+ /*!
+ * Get informations about mesh contents
+ */
long NbNodes()
raises (SALOME::SALOME_Exception);
long NbQuadrangles()
raises (SALOME::SALOME_Exception);
+ long NbPolygons()
+ raises (SALOME::SALOME_Exception);
+
long NbVolumes()
raises (SALOME::SALOME_Exception);
long NbPrisms()
raises (SALOME::SALOME_Exception);
+ long NbPolyhedrons()
+ raises (SALOME::SALOME_Exception);
+
long NbSubMesh()
raises (SALOME::SALOME_Exception);
long_array GetNodesId()
raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns type of mesh element
+ */
+ ElementType GetElementType( in long id, in boolean iselem )
+ raises (SALOME::SALOME_Exception);
+ /*!
+ * Get mesh description
+ */
string Dump();
};
interface SMESH_subMesh : SALOME::GenericObj, SMESH_IDSource
{
/*!
- *
+ *
*/
long GetNumberOfElements()
raises (SALOME::SALOME_Exception);
/*!
- *
+ *
*/
long GetNumberOfNodes( in boolean all )
raises (SALOME::SALOME_Exception);
/*!
- *
+ *
*/
long_array GetElementsId()
raises (SALOME::SALOME_Exception);
/*!
- *
+ *
*/
long_array GetElementsByType( in ElementType theType )
raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Return type of submesh element
+ */
+ ElementType GetElementType( in long id, in boolean iselem )
+ raises (SALOME::SALOME_Exception);
/*!
- *
+ *
*/
long_array GetNodesId()
raises (SALOME::SALOME_Exception);
raises (SALOME::SALOME_Exception);
/*!
- * Get the internal Id
+ * Get the internal Id
*/
- long GetId();
+ long GetId();
/*!
* Get MED subMesh
SALOME_MED::FAMILY GetFamily()
raises (SALOME::SALOME_Exception);
};
-
- /*
+
+ /*!
* This interface makes modifications on the Mesh - removing elements and nodes etc.
*/
interface NumericalFunctor;
- interface SMESH_MeshEditor {
-
-
+ interface SMESH_MeshEditor
+ {
boolean RemoveElements(in long_array IDsOfElements);
boolean RemoveNodes(in long_array IDsOfNodes);
boolean AddVolume(in long_array IDsOfNodes);
+ /*!
+ * Create volume of many faces, giving nodes for each face.
+ * \param IdsOfNodes List of node IDs for volume creation face by face.
+ * \param Quantities List of integer values, Quantities[i]
+ * gives quantity of nodes in face number i.
+ */
+ boolean AddPolyhedralVolume (in long_array IdsOfNodes,
+ in long_array Quantities);
+
+ /*!
+ * Create volume of many faces, giving IDs of existing faces.
+ * \param IdsOfFaces List of face IDs for volume creation.
+ * \note The created volume will refer only to nodes
+ * of the given faces, not to the faces itself.
+ */
+ boolean AddPolyhedralVolumeByFaces (in long_array IdsOfFaces);
+
boolean MoveNode(in long NodeID, in double x, in double y, in double z);
boolean InverseDiag(in long NodeID1, in long NodeID2);
boolean DeleteDiag(in long NodeID1, in long NodeID2);
boolean Reorient(in long_array IDsOfElements);
-
- boolean ReorientObject(in SMESH_IDSource theObject);
- boolean TriToQuad(in long_array IDsOfElements,
- in NumericalFunctor Criterion,
- in double MaxAngle);
-
- boolean TriToQuadObject(in SMESH_IDSource theObject,
- in NumericalFunctor Criterion,
- in double MaxAngle);
-
- boolean QuadToTri(in long_array IDsOfElements,
- in NumericalFunctor Criterion);
+ boolean ReorientObject(in SMESH_IDSource theObject);
+
+ /*!
+ * \brief Fuse neighbour triangles into quadrangles.
+ * \param theElems The triangles to be fused.
+ * \param theCriterion Is used to choose a neighbour to fuse with.
+ * \param theMaxAngle Is a max angle between element normals at which fusion
+ * is still performed; theMaxAngle is mesured in radians.
+ * \return TRUE in case of success, FALSE otherwise.
+ */
+ boolean TriToQuad (in long_array IDsOfElements,
+ in NumericalFunctor Criterion,
+ in double MaxAngle);
- boolean SplitQuad(in long_array IDsOfElements,
- in boolean Diag13);
+ /*!
+ * \brief Fuse neighbour triangles into quadrangles.
+ *
+ * Behaves like the above method, taking list of elements from \a theObject
+ */
+ boolean TriToQuadObject (in SMESH_IDSource theObject,
+ in NumericalFunctor Criterion,
+ in double MaxAngle);
+
+ /*!
+ * \brief Split quadrangles into triangles.
+ * \param theElems The faces to be splitted.
+ * \param theCriterion Is used to choose a diagonal for splitting.
+ * \return TRUE in case of success, FALSE otherwise.
+ */
+ boolean QuadToTri (in long_array IDsOfElements,
+ in NumericalFunctor Criterion);
+
+ /*!
+ * \brief Split quadrangles into triangles.
+ *
+ * Behaves like the above method, taking list of elements from \a theObject
+ */
+ boolean QuadToTriObject (in SMESH_IDSource theObject,
+ in NumericalFunctor Criterion);
+
+ /*!
+ * \brief Split quadrangles into triangles.
+ * \param theElems The faces to be splitted.
+ * \param the13Diag Is used to choose a diagonal for splitting.
+ * \return TRUE in case of success, FALSE otherwise.
+ */
+ boolean SplitQuad (in long_array IDsOfElements,
+ in boolean Diag13);
+
+ /*!
+ * \brief Split quadrangles into triangles.
+ *
+ * Behaves like the above method, taking list of elements from \a theObject
+ */
+ boolean SplitQuadObject (in SMESH_IDSource theObject,
+ in boolean Diag13);
- boolean SplitQuadObject(in SMESH_IDSource theObject,
- in boolean Diag13);
+ /*!
+ * Find better splitting of the given quadrangle.
+ * \param IDOfQuad ID of the quadrangle to be splitted.
+ * \param Criterion A criterion to choose a diagonal for splitting.
+ * \return 1 if 1-3 diagonal is better, 2 if 2-4
+ * diagonal is better, 0 if error occurs.
+ */
+ long BestSplit (in long IDOfQuad,
+ in NumericalFunctor Criterion);
enum Smooth_Method { LAPLACIAN_SMOOTH, CENTROIDAL_SMOOTH };
in double MaxAspectRatio,
in Smooth_Method Method);
+ boolean SmoothParametric(in long_array IDsOfElements,
+ in long_array IDsOfFixedNodes,
+ in long MaxNbOfIterations,
+ in double MaxAspectRatio,
+ in Smooth_Method Method);
+
+ boolean SmoothParametricObject(in SMESH_IDSource theObject,
+ in long_array IDsOfFixedNodes,
+ in long MaxNbOfIterations,
+ in double MaxAspectRatio,
+ in Smooth_Method Method);
+
void RenumberNodes();
void RenumberElements();
in double AngleInRadians,
in long NbOfSteps,
in double Tolerance);
-
+
void ExtrusionSweep(in long_array IDsOfElements,
in DirStruct StepVector,
in long NbOfSteps);
+ /*!
+ * Generate new elements by extrusion of theElements
+ * by StepVector by NbOfSteps
+ * param ExtrFlags set flags for performing extrusion
+ * param SewTolerance - uses for comparing locations of nodes if flag
+ * EXTRUSION_FLAG_SEW is set
+ */
+ void AdvancedExtrusion(in long_array IDsOfElements,
+ in DirStruct StepVector,
+ in long NbOfSteps,
+ in long ExtrFlags,
+ in double SewTolerance);
+
void ExtrusionSweepObject(in SMESH_IDSource theObject,
in DirStruct StepVector,
in long NbOfSteps);
+ void ExtrusionSweepObject1D(in SMESH_IDSource theObject,
+ in DirStruct StepVector,
+ in long NbOfSteps);
+
+ void ExtrusionSweepObject2D(in SMESH_IDSource theObject,
+ in DirStruct StepVector,
+ in long NbOfSteps);
+
enum Extrusion_Error {
EXTR_OK,
- EXTR_NO_ELEMENTS,
+ EXTR_NO_ELEMENTS,
EXTR_PATH_NOT_EDGE,
EXTR_BAD_PATH_SHAPE,
EXTR_BAD_STARTING_NODE,
void TranslateObject (in SMESH_IDSource theObject,
in DirStruct Vector,
in boolean Copy);
-
+
void Rotate (in long_array IDsOfElements,
in AxisStruct Axis,
in double AngleInRadians,
in AxisStruct Axis,
in double AngleInRadians,
in boolean Copy);
-
+
void FindCoincidentNodes (in double Tolerance,
out array_of_long_array GroupsOfNodes);
in long LastNodeID1,
in long FirstNodeID2,
in long SecondNodeID2,
- in long LastNodeID2);
+ in long LastNodeID2,
+ in boolean CreatePolygons,
+ in boolean CreatePolyedrs);
Sew_Error SewConformFreeBorders (in long FirstNodeID1,
in long SecondNodeID1,
in long SecondNodeIDOnFreeBorder,
in long LastNodeIDOnFreeBorder,
in long FirstNodeIDOnSide,
- in long LastNodeIDOnSide);
+ in long LastNodeIDOnSide,
+ in boolean CreatePolygons,
+ in boolean CreatePolyedrs);
Sew_Error SewSideElements (in long_array IDsOfSide1Elements,
in long_array IDsOfSide2Elements,
