-// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2021 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#include "SMESH_Mesh.idl"
#include "SMESH_Hypothesis.idl"
+#include "SMESH_smIdType.idl"
module SMESH
{
interface FilterManager;
interface SMESH_Pattern;
interface Measurements;
+ interface MG_ADAPT;
+ interface MG_ADAPT_OBJECT;
/*!
* Tags definition
const long Tag_LastGroup = 16;
/*!
- * Hypothesis definintion error
+ * Hypothesis definition error
*/
struct AlgoStateError
{
};
typedef sequence<ComputeError> compute_error_array;
+ /*!
+ * Way to initialize hypothesis
+ */
+ struct HypInitParams
+ {
+ short way; // 0 - by mesh, 1 - by geometry size + preferred parameters, 2 - by averageLength
+ double averageLength;
+ boolean quadDominated;
+ };
interface SMESH_Gen : Engines::EngineComponent, SALOMEDS::Driver
{
boolean IsEmbeddedMode();
/*!
- Set the current study
+ Update the study
*/
- void SetCurrentStudy( in SALOMEDS::Study theStudy );
-
+ void UpdateStudy();
+
+ /*!
+ Set enable publishing in the study
+ */
+ void SetEnablePublish( in boolean theIsEnablePublish );
+
/*!
- Get the current study
+ Get enable publishing in the study
*/
- SALOMEDS::Study GetCurrentStudy();
+ boolean IsEnablePublish();
/*!
* Create a hypothesis that can be shared by different parts of the mesh.
in string theLibName )
raises ( SALOME::SALOME_Exception );
+ /*!
+ * Create a hypothesis and initialize it by average length
+ */
+ SMESH_Hypothesis CreateHypothesisByAverageLength( in string theHypName,
+ in string theLibName,
+ in double theAverageLength,
+ in boolean theQuadDominated)
+ raises ( SALOME::SALOME_Exception );
+
/*!
* Return a hypothesis holding parameter values corresponding either to the mesh
* existing on the given geometry or to size of the geometry.
in string theLibName,
in SMESH_Mesh theMesh,
in GEOM::GEOM_Object theGeom,
- in boolean byMesh)
+ in HypInitParams theWay)
raises ( SALOME::SALOME_Exception );
/*!
raises ( SALOME::SALOME_Exception );
/*!
- * Concatenate the given meshes or groups into one mesh.
+ * Create a mesh by copying definitions of another mesh to a given geometry
+ * \param sourceMesh - a mesh to copy
+ * \param newGeometry - a new geometry
+ * \param meshName - a name of the new mesh
+ * \param toCopyGroups - to create groups in the new mesh
+ * \param toReuseHypotheses - if True, existing hypothesis will be used by the new mesh,
+ * otherwise new hypotheses with the same parameters will be created for the new mesh.
+ * \param toCopyElements - to copy mesh elements of same sub-shapes of the two geometries
+ * \param newMesh - return a new mesh
+ * \param newGroups - return new groups
+ * \param newSubmeshes - return new sub-meshes
+ * \param newHypotheses - return new algorithms and hypotheses
+ * \param invalidEntries - return study entries of objects whose
+ * counterparts are not found in the newGeometry, followed by entries
+ * of mesh sub-objects that are invalid because they depend on a not found
+ * preceding sub-shape
+ */
+ boolean CopyMeshWithGeom( in SMESH_Mesh sourceMesh,
+ in GEOM::GEOM_Object newGeometry,
+ in string meshName,
+ in boolean toCopyGroups,
+ in boolean toReuseHypotheses,
+ in boolean toCopyElements,
+ out SMESH_Mesh newMesh,
+ out ListOfGroups newGroups,
+ out submesh_array newSubmeshes,
+ out ListOfHypothesis newHypotheses,
+ out string_array invalidEntries)
+ raises ( SALOME::SALOME_Exception );
+
+ /*!
+ * Concatenate the given meshes or groups into one mesh,
+ * optionally to theMeshToAppendTo.
* Union groups with the same name and type if
* theUniteIdenticalGroups flag is true.
* Merge coincident nodes and elements if
SMESH_Mesh Concatenate(in ListOfIDSources theMeshesArray,
in boolean theUniteIdenticalGroups,
in boolean theMergeNodesAndElements,
- in double theMergeTolerance)
+ in double theMergeTolerance,
+ in SMESH_Mesh theMeshToAppendTo)
raises ( SALOME::SALOME_Exception );
/*!
- * Concatenate the given meshes into one mesh.
+ * Concatenate the given meshes into one mesh,
+ * optionally to theMeshToAppendTo.
* Union groups with the same name and type if
* theUniteIdenticalGroups flag is true.
* Merge coincident nodes and elements if
SMESH_Mesh ConcatenateWithGroups(in ListOfIDSources theMeshesArray,
in boolean theUniteIdenticalGroups,
in boolean theMergeNodesAndElements,
- in double theMergeTolerance)
+ in double theMergeTolerance,
+ in SMESH_Mesh theMeshToAppendTo)
raises ( SALOME::SALOME_Exception );
/*!
/*!
* Evaluates size of prospective mesh on a shape
*/
- long_array Evaluate(in SMESH_Mesh theMesh,
- in GEOM::GEOM_Object theSubObject)
+ smIdType_array Evaluate(in SMESH_Mesh theMesh,
+ in GEOM::GEOM_Object theSubObject)
raises ( SALOME::SALOME_Exception );
/*!
raises ( SALOME::SALOME_Exception );
/*!
- * Return errors of hypotheses definintion
+ * Return errors of hypotheses definition
* algo_error_array is empty if everything is OK
*/
algo_error_array GetAlgoState( in SMESH_Mesh theMesh,
* The returned geometrical object, if not nil, is either found in the
* study or is published by this method with the given name
*/
- GEOM::GEOM_Object GetGeometryByMeshElement( in SMESH_Mesh theMesh,
- in long theElementID,
- in string theGeomName)
+ GEOM::GEOM_Object GetGeometryByMeshElement( in SMESH_Mesh theMesh,
+ in smIdType theElementID,
+ in string theGeomName)
raises ( SALOME::SALOME_Exception );
/*!
* Return geometrical object the given element is built on.
* The returned geometrical object not published in study by this method.
*/
- GEOM::GEOM_Object FindGeometryByMeshElement( in SMESH_Mesh theMesh,
- in long theElementID)
+ GEOM::GEOM_Object FindGeometryByMeshElement( in SMESH_Mesh theMesh,
+ in smIdType theElementID)
raises ( SALOME::SALOME_Exception );
/*!
*/
long GetObjectId(in Object theObject);
+ /*!
+ * \brief Get version of MED format being used.
+ */
+ string GetMEDFileVersion();
+
/*!
* \brief Get MED version of the file by its name.
*/
- boolean GetMEDVersion(in string theFileName, out MED_VERSION theVersion);
+ string GetMEDVersion(in string theFileName);
+
+ /*!
+ * \brief Check compatibility of file with MED format being used, for read only.
+ */
+ boolean CheckCompatibility(in string theFileName);
+
+ /*!
+ * \brief Check compatibility of file with MED format being used, for append on write.
+ */
+ boolean CheckWriteCompatibility(in string theFileName);
/*!
* \brief Get names of meshes defined in file with the specified name.
* Return indices of elements, which are located inside the sphere
* \param theSource - mesh, sub-mesh or group
* \param theElemType - mesh element type
- * \param theX - x cooridate of the center of the sphere
- * \param theY - y cooridate of the center of the sphere
- * \param theZ - y cooridate of the center of the sphere
+ * \param theX - x coordinate of the center of the sphere
+ * \param theY - y coordinate of the center of the sphere
+ * \param theZ - y coordinate of the center of the sphere
* \param theR - radius of the sphere
*/
long_array GetInsideSphere( in SMESH_IDSource theSource,
* Return indices of elements, which are located inside the box
* \param theSource - mesh, sub-mesh or group
* \param theElemType - mesh element type
- * \param theX1 - x cooridate of the first opposite point
- * \param theY1 - y cooridate of the first opposite point
- * \param theZ1 - y cooridate of the first opposite point
- * \param theX2 - x cooridate of the second opposite point
- * \param theY2 - y cooridate of the second opposite point
- * \param theZ2 - y cooridate of the second opposite point
+ * \param theX1 - x coordinate of the first opposite point
+ * \param theY1 - y coordinate of the first opposite point
+ * \param theZ1 - y coordinate of the first opposite point
+ * \param theX2 - x coordinate of the second opposite point
+ * \param theY2 - y coordinate of the second opposite point
+ * \param theZ2 - y coordinate of the second opposite point
*/
long_array GetInsideBox( in SMESH_IDSource theSource,
in ElementType theElemType,
* Return indices of elements, which are located inside the box
* \param theSource - mesh, sub-mesh or group
* \param theElemType - mesh element type
- * \param theX - x cooridate of the cented of the bottom face
- * \param theY - y cooridate of the cented of the bottom face
- * \param theZ - y cooridate of the cented of the bottom face
- * \param theDX - x cooridate of the cented of the base vector
- * \param theDY - y cooridate of the cented of the base vector
- * \param theDZ - z cooridate of the cented of the base vector
+ * \param theX - x coordinate of the cented of the bottom face
+ * \param theY - y coordinate of the cented of the bottom face
+ * \param theZ - y coordinate of the cented of the bottom face
+ * \param theDX - x coordinate of the cented of the base vector
+ * \param theDY - y coordinate of the cented of the base vector
+ * \param theDZ - z coordinate of the cented of the base vector
* \param theH - height of the cylinder
* \param theR - radius of the cylinder
*/
in GEOM::GEOM_Object theGeom,
in double theTolerance );
-
+ MG_ADAPT CreateMG_ADAPT();
+ MG_ADAPT_OBJECT Adaptation(in string adaptType);
+ MG_ADAPT CreateAdaptationHypothesis();
};
};
