-// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
+
// File : SMESH_Filter.idl
// Author : Alexey Petrov, OCC
//
FT_Skew,
FT_Area,
FT_Volume3D,
+ FT_MaxElementLength2D,
+ FT_MaxElementLength3D,
FT_FreeBorders,
FT_FreeEdges,
FT_FreeNodes,
FT_FreeFaces,
+ FT_EqualNodes, // IMPORTANT: when a new item is added, please
+ FT_EqualEdges, // 1) update getFunctNames() in SMESH_Filter_i.cxx: line 3910
+ FT_EqualFaces, // 2) update fixFunctorType() in SMESH_2smeshpy.cxx: line 234
+ FT_EqualVolumes,
FT_MultiConnection,
FT_MultiConnection2D,
FT_Length,
FT_LyingOnGeom,
FT_RangeOfIds,
FT_BadOrientedVolume,
+ FT_BareBorderVolume,
+ FT_BareBorderFace,
+ FT_OverConstrainedVolume,
+ FT_OverConstrainedFace,
FT_LinearOrQuadratic,
FT_GroupColor,
FT_ElemGeomType,
+ FT_CoplanarFaces,
+ FT_BallDiameter,
FT_LessThan,
FT_MoreThan,
FT_EqualTo,
FT_Undefined
};
+ /*!
+ * Parameters of a reclangle of histogram
+ */
+ struct HistogramRectangle
+ {
+ long nbEvents;
+ double min;
+ double max;
+ };
+ typedef sequence<HistogramRectangle> Histogram;
+
+
/*!
* Base interface for all functors ( i.e. numerical functors and predicates )
*/
ElementType GetElementType();
};
-
-
/*!
* Numerical functors are intended for calculating value by Id of mesh entity
*/
{
double GetValue( in long theElementId );
+ Histogram GetHistogram( in short nbIntervals, in boolean isLogarithmic );
+
/*!
* Set precision for calculation. It is a position after point which is
* used to functor value after calculation.
interface Skew : NumericalFunctor{};
interface Area : NumericalFunctor{};
interface Volume3D : NumericalFunctor{};
+ interface MaxElementLength2D : NumericalFunctor{};
+ interface MaxElementLength3D : NumericalFunctor{};
interface Length : NumericalFunctor{};
interface Length2D : NumericalFunctor
{
typedef sequence<Value> Values;
Values GetValues();
};
+ interface BallDiameter : NumericalFunctor{};
+
/*!
* Predicates are intended for verification of criteria,
* must return bool value by mesh id
*/
interface BadOrientedVolume: Predicate {};
+ /*!
+ * Logical functor (predicate) "Volumes with bare border".
+ * Verify whether a mesh volume has a free facet without a mesh face on it
+ */
+ interface BareBorderVolume: Predicate {};
+ /*!
+ * Logical functor (predicate) "Faces with bare border".
+ * Verify whether a mesh face has a side not shared with another face
+ * and without a mesh edge on it
+ */
+ interface BareBorderFace: Predicate {};
+
+ /*!
+ * Logical functor (predicate) "Over-constrained Volume"
+ * Verify whether a mesh volume has only one facet shared with other volumes
+ */
+ interface OverConstrainedVolume: Predicate {};
+ /*!
+ * Logical functor (predicate) "Over-constrained Face".
+ * Verify whether a mesh face has only one border shared with other faces
+ */
+ interface OverConstrainedFace: Predicate {};
+
+ /*!
+ * Logical functor (predicate) "Equal Nodes".
+ * Verify whether there is another mesh node with same coordinates
+ */
+ interface EqualNodes: Predicate
+ {
+ void SetTolerance( in double theToler );
+ double GetTolerance();
+ };
+ /*!
+ * Logical functor (predicate) "Equal Edges".
+ * Verify whether there is another mesh edge basing on the same nodes
+ */
+ interface EqualEdges: Predicate {};
+ /*!
+ * Logical functor (predicate) "Equal Faces".
+ * Verify whether there is another mesh face basing on the same nodes
+ */
+ interface EqualFaces: Predicate {};
+ /*!
+ * Logical functor (predicate) "Equal Volumes".
+ * Verify whether there is another mesh volumes basing on the same nodes
+ */
+ interface EqualVolumes: Predicate {};
+
/*!
* Logical functor (predicate) "Belong To Geometry".
* Verify whether mesh element or node belong to pointed Geom Object
void SetGeometryType( in GeometryType theType );
};
+ /*!
+ * Functor "Coplanar faces"
+ * Returns true if a mesh face is a coplanar neighbour to a given one. It checks
+ * if normal of a face has angle with the threshold face less than a tolerance.
+ */
+ interface CoplanarFaces : Predicate{
+ void SetFace ( in long theFaceID );
+ void SetTolerance( in double theToler );
+ };
+
/*!
* Filter
*/
* BinaryOp - binary logical operation FT_LogicalAND, FT_LogicalOR or
* (FT_Undefined must be for the last criterion)
* ThresholdStr - Threshold value defined as string. Used for:
- * 1. Diaposon of identifiers. Example: "1,2,3,5-10,12,27-29"
+ * 1. Diapason of identifiers. Example: "1,2,3,5-10,12,27-29"
* 2. BelongToGeom predicate for storing name of shape
* 3. GroupColor predicate for storing group color "0.2;0;0.5"
* ThresholdID - One more threshold value defined as string. Used for:
* 1. BelongToGeom predicate for storing id of shape
* Tolerance - Tolerance is used for comparators (EqualTo comparision) and for
- * "Belong to plane" and "Belong to cylinder" predicates
+ * "Belong to plane", "Belong to cylinder" etc predicates
* TypeOfElement - type of element SMESH::NODE, SMESH::FACE (used by BelongToGeom predicate only)
* Precision - Precision of numerical functors
*/
Skew CreateSkew();
Area CreateArea();
Volume3D CreateVolume3D();
+ MaxElementLength2D CreateMaxElementLength2D();
+ MaxElementLength3D CreateMaxElementLength3D();
Length CreateLength();
Length2D CreateLength2D();
MultiConnection CreateMultiConnection();
MultiConnection2D CreateMultiConnection2D();
+ BallDiameter CreateBallDiameter();
/*!
* Create logical functors ( predicates )
FreeNodes CreateFreeNodes();
FreeFaces CreateFreeFaces();
+ EqualNodes CreateEqualNodes();
+ EqualEdges CreateEqualEdges();
+ EqualFaces CreateEqualFaces();
+ EqualVolumes CreateEqualVolumes();
+
RangeOfIds CreateRangeOfIds();
BadOrientedVolume CreateBadOrientedVolume();
+ BareBorderVolume CreateBareBorderVolume();
+ BareBorderFace CreateBareBorderFace();
+ OverConstrainedVolume CreateOverConstrainedVolume();
+ OverConstrainedFace CreateOverConstrainedFace();
LinearOrQuadratic CreateLinearOrQuadratic();
GroupColor CreateGroupColor();
ElemGeomType CreateElemGeomType();
+ CoplanarFaces CreateCoplanarFaces();
/*!
* Create comparators ( predicates )
