-// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
+// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
//
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
// File : SMESH_BasicHypothesis.idl
// Author : Paul RASCLE, EDF
-// $Header$
-
+//
#ifndef _SMESH_BASICHYPOTHESIS_IDL_
#define _SMESH_BASICHYPOTHESIS_IDL_
#include "SALOME_Exception.idl"
#include "SMESH_Hypothesis.idl"
-
+#include "SMESH_Mesh.idl"
/*!
* StdMeshers: interfaces to standard hypotheses and algorithms
/*!
* Sets <length> parameter value
*/
- void SetLength(in double length)
+ void SetLength(in double length)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Sets <precision> parameter value
+ *
+ * Precision parameter is used to allow rounding a number of segments,
+ * calculated from the edge length and average length of segment,
+ * to the lower integer, if this value outstands from it in bounds of the precision.
+ * Otherwise, the number of segments is rounded to the higher integer.
+ * Use value 0.5 to provide rounding to the nearest integer,
+ * 1.0 for the lower integer, 0.0 for the higher integer.
+ * Default value is 1e-07. In old studies, restored from file,
+ * this value will be set to zero, what corresponds to the old behaviour.
+ */
+ void SetPrecision(in double precision)
raises (SALOME::SALOME_Exception);
/*!
* Returns <length> parameter value
*/
double GetLength();
+
+ /*!
+ * Returns <precision> parameter value
+ */
+ double GetPrecision();
+ };
+
+ /*!
+ * StdMeshers_MaxLength: interface of "Max length" hypothesis
+ */
+ interface StdMeshers_MaxLength : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets <length> parameter value
+ */
+ void SetLength(in double length)
+ raises (SALOME::SALOME_Exception);
+ /*!
+ * Returns <length> parameter value
+ */
+ double GetLength();
+ /*!
+ * Returns true if preestemated length is defined
+ */
+ boolean HavePreestimatedLength();
+ /*!
+ * Returns preestemated length
+ */
+ double GetPreestimatedLength();
+ /*!
+ * Sets preestemated length
+ */
+ void SetPreestimatedLength(in double length);
+ /*!
+ * Sets boolean parameter enabling/desabling usage of length computed
+ * basing on size of bounding box of shape to mesh
+ */
+ void SetUsePreestimatedLength(in boolean toUse);
+ /*!
+ * Returns value of boolean parameter enabling/desabling usage of length computed
+ * basing on size of bounding box of shape to mesh
+ */
+ boolean GetUsePreestimatedLength();
+ };
+
+ /*!
+ * StdMeshers_AutomaticLength: interface of "Automatic length" hypothesis
+ */
+ interface StdMeshers_AutomaticLength : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets Fineness parameter value
+ */
+ void SetFineness(in double theFineness)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns <Fineness> parameter value
+ */
+ double GetFineness();
};
/*!
*/
interface StdMeshers_NumberOfSegments : SMESH::SMESH_Hypothesis
{
+ /*!
+ * Builds and returns point distribution according to passed density function
+ */
+ SMESH::double_array BuildDistributionExpr( in string func, in long nbSeg, in long conv )
+ raises (SALOME::SALOME_Exception);
+ SMESH::double_array BuildDistributionTab( in SMESH::double_array func, in long nbSeg, in long conv )
+ raises (SALOME::SALOME_Exception);
+
/*!
* Sets <number of segments> parameter value
*/
- void SetNumberOfSegments(in long segmentsNumber)
+ void SetNumberOfSegments(in long segmentsNumber)
raises (SALOME::SALOME_Exception);
/*!
*/
long GetNumberOfSegments();
+ /*!
+ * Sets <distribution type> parameter value
+ */
+ void SetDistrType(in long typ)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns <distribution type> parameter value
+ */
+ long GetDistrType();
+
/*!
* Sets <scale factor> parameter value
*/
/*!
* Returns <scale factor> parameter value
*/
- double GetScaleFactor();
+ double GetScaleFactor()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Sets <table function> parameter value for distribution DT_TabFunc
+ */
+ void SetTableFunction(in SMESH::double_array table)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns <table function> parameter value for distribution DT_TabFunc
+ */
+ SMESH::double_array GetTableFunction()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Sets <expression function> parameter value for distribution DT_ExprFunc
+ */
+ void SetExpressionFunction(in string expr)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns <expression function> parameter value for distribution DT_ExprFunc
+ */
+ string GetExpressionFunction()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Sets <conversion mode> parameter value for functional distributions
+ */
+ void SetConversionMode(in long conv )
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns <conversion mode> parameter value for functional distributions
+ */
+ long ConversionMode()
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Set list of edges to reverse
+ */
+ void SetReversedEdges( in SMESH::long_array list );
+
+ /*!
+ * Returns list of edges to reverse
+ */
+ SMESH::long_array GetReversedEdges();
+
+ /*!
+ * Set entry of the main object
+ */
+ void SetObjectEntry( in string entry );
+
+ /*!
+ * Get the entry of the main object
+ */
+ string GetObjectEntry();
+ };
+
+ /*!
+ * StdMeshers_Arithmetic1D: interface of "Arithmetic 1D" hypothesis
+ */
+ interface StdMeshers_Arithmetic1D : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets <start segment length> or <end segment length> parameter value
+ * * OBSOLETE *. Avoid such a way of interface design
+ * * It is recommended to dedicate a method to each parameter.
+ */
+ void SetLength(in double length, in boolean isStartLength)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Sets <start segment length> parameter value
+ */
+ void SetStartLength(in double length)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Sets <end segment length> parameter value
+ */
+ void SetEndLength(in double length)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns <start segment length> or <end segment length> parameter value
+ */
+ double GetLength(in boolean isStartLength);
+
+ /*!
+ * Set list of edges to reverse
+ */
+ void SetReversedEdges( in SMESH::long_array list );
+
+ /*!
+ * Returns list of edges to reverse
+ */
+ SMESH::long_array GetReversedEdges();
+
+ /*!
+ * Set entry of the main object
+ */
+ void SetObjectEntry( in string entry );
+
+ /*!
+ * Get the entry of the main object
+ */
+ string GetObjectEntry();
};
/*!
long GetMode();
};
+ /*!
+ * StdMeshers_StartEndLength: interface of "Start and End Length" hypothesis
+ */
+ interface StdMeshers_StartEndLength : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets <start segment length> or <end segment length> parameter value
+ * * OBSOLETE *. Avoid such a way of interface design.
+ * * It is recommended to dedicate a method to each parameter.
+ */
+ void SetLength(in double length, in boolean isStartLength)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Sets <start segment length> parameter value
+ */
+ void SetStartLength(in double length)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Sets <end segment length> parameter value
+ */
+ void SetEndLength(in double length)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns <start segment length> or <end segment length> parameter value
+ */
+ double GetLength(in boolean isStartLength);
+
+ /*!
+ * Set list of edges to reverse
+ */
+ void SetReversedEdges( in SMESH::long_array list );
+
+ /*!
+ * Returns list of edges to reverse
+ */
+ SMESH::long_array GetReversedEdges();
+
+ /*!
+ * Set entry of the main object
+ */
+ void SetObjectEntry( in string entry );
+
+ /*!
+ * Get the entry of the main object
+ */
+ string GetObjectEntry();
+ };
+
+
+ /*!
+ * StdMeshers_Deflection1D: interface of "Deflection 1D" hypothesis
+ */
+ interface StdMeshers_Deflection1D : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets <deflection> parameter value
+ */
+ void SetDeflection(in double deflection)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns <deflection> parameter value
+ */
+ double GetDeflection();
+ };
+
+
+ /*!
+ * StdMeshers_FixedPoints1D: interface of "Fixed points 1D" hypothesis
+ */
+ interface StdMeshers_FixedPoints1D : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets some points on edge using parameter on curve from 0 to 1
+ * (additionally it is neecessary to check orientation of edges and
+ * create list of reversed edges if it is needed) and sets numbers
+ * of segments between given points (default values are equals 1)
+ */
+ void SetPoints(in SMESH::double_array listParams)
+ raises (SALOME::SALOME_Exception);
+ void SetNbSegments(in SMESH::long_array listNbSeg)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns list of point's parameters
+ */
+ SMESH::double_array GetPoints();
+
+ /*!
+ * Returns list of numbers of segments
+ */
+ SMESH::long_array GetNbSegments();
+
+ /*!
+ * Set list of edges to reverse
+ */
+ void SetReversedEdges( in SMESH::long_array list );
+
+ /*!
+ * Returns list of edges to reverse
+ */
+ SMESH::long_array GetReversedEdges();
+
+ /*!
+ * Set entry of the main object
+ */
+ void SetObjectEntry( in string entry );
+
+ /*!
+ * Get the entry of the main object
+ */
+ string GetObjectEntry();
+ };
+
+
/*!
* StdMeshers_MaxElementVolume: interface of "Max. Hexahedron or Tetrahedron Volume" hypothesis
*/
{
};
+ /*!
+ * StdMeshers_Propagation: interface of "Propagation" hypothesis.
+ * Presence of this hypothesis on any edge propagates any other 1D
+ * hypothesis from this edge on all edges, opposite to it.
+ * It concerns only edges of quadrangle faces.
+ */
+ interface StdMeshers_Propagation : SMESH::SMESH_Hypothesis
+ {
+ };
+
+ /*!
+ * StdMeshers_QuadranglePreference: interface of "QuadranglePreference" hypothesis.
+ * This hypothesis is used by StdMeshers_Quadrangle_2D algorithm.
+ * Presence of this hypothesis forces construction of quadrangles if the number
+ * of nodes on opposite edges is not the same in the case where the global number
+ * of nodes on edges is even
+ */
+ interface StdMeshers_QuadranglePreference : SMESH::SMESH_Hypothesis
+ {
+ };
+
+ /*!
+ * StdMeshers_TrianglePreference: interface of "TrianglePreference" hypothesis.
+ * This hypothesis is used by StdMeshers_Quadrangle_2D algorithm.
+ * Presence of this hypothesis forces construction of triangles in the refinement
+ * area if the number of nodes on opposite edges is not the same.
+ */
+ interface StdMeshers_TrianglePreference : SMESH::SMESH_Hypothesis
+ {
+ };
+
+ /*!
+ * StdMeshers_QuadraticMesh: interface of "QuadraticMesh" hypothesis.
+ * This is an auxiliary 1D hypothesis whose presence forces construction
+ * of quadratic edges.
+ * If the 2D mesher sees that all boundary edges are quadratic ones,
+ * it generates quadratic faces, else it generates linear faces using
+ * medium nodes as if they were vertex ones.
+ * The 3D mesher generates quadratic volumes only if all boundary faces
+ * are quadratic ones, else it fails.
+ */
+ interface StdMeshers_QuadraticMesh : SMESH::SMESH_Hypothesis
+ {
+ };
+
+
+ /*!
+ * StdMeshers_NumberOfLayers: interface of "Nb. Layers" hypothesis.
+ * This hypothesis is used by "Radial prism" algorithm.
+ * It specifies number of segments between the internal
+ * and the external surfaces.
+ */
+ interface StdMeshers_NumberOfLayers : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets <number of segments> parameter value
+ */
+ void SetNumberOfLayers(in long numberOfLayers)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns <number of layers> parameter value
+ */
+ long GetNumberOfLayers();
+
+ };
+
+ /*!
+ * StdMeshers_LayerDistribution: interface of "Distribution of Layers" hypothesis.
+ * This hypothesis is used by "Radial prism" algorithm.
+ * It specifies 1D hypothesis defining distribution of segments between the internal
+ * and the external surfaces.
+ */
+ interface StdMeshers_LayerDistribution : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets 1D hypothesis specifying distribution of layers
+ */
+ void SetLayerDistribution(in SMESH::SMESH_Hypothesis distributionHyp)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns 1D hypothesis specifying distribution of layers
+ */
+ SMESH::SMESH_Hypothesis GetLayerDistribution();
+
+ };
+
+ /*!
+ * StdMeshers_NumberOfLayers2D: interface of "Nb. Layers" hypothesis.
+ * This hypothesis is used by "Radial quadrangle" algorithm.
+ * It specifies number of segments between the internal
+ * and the external surfaces.
+ */
+ interface StdMeshers_NumberOfLayers2D : StdMeshers_NumberOfLayers
+ {
+ };
+
+ /*!
+ * StdMeshers_LayerDistribution2D: interface of "Distribution of Layers" hypothesis.
+ * This hypothesis is used by "Radial quadrangle" algorithm.
+ * It specifies 1D hypothesis defining distribution of segments between the internal
+ * and the external surfaces.
+ */
+ interface StdMeshers_LayerDistribution2D : StdMeshers_LayerDistribution
+ {
+ };
+
+ /*!
+ * interface of "ProjectionSource1D" hypothesis.
+ * This hypothesis specifies a meshed edge to take a mesh pattern from
+ * and optionally association of vertices between the source edge and a
+ * target one (where a hipothesis is assigned to)
+ */
+ interface StdMeshers_ProjectionSource1D : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets source <edge> to take a mesh pattern from
+ */
+ void SetSourceEdge(in GEOM::GEOM_Object edge)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns the source edge
+ */
+ GEOM::GEOM_Object GetSourceEdge();
+
+ /*!
+ * Sets source <mesh> to take a mesh pattern from
+ */
+ void SetSourceMesh(in SMESH::SMESH_Mesh mesh);
+
+ /*!
+ * Return source mesh
+ */
+ SMESH::SMESH_Mesh GetSourceMesh();
+
+ /*!
+ * Sets vertex association between the source edge and the target one.
+ * This parameter is optional
+ */
+ void SetVertexAssociation(in GEOM::GEOM_Object sourceVertex,
+ in GEOM::GEOM_Object targetVertex)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns the vertex associated with the target vertex.
+ * Result may be nil if association not set
+ */
+ GEOM::GEOM_Object GetSourceVertex();
+
+ /*!
+ * Returns the vertex associated with the source vertex.
+ * Result may be nil if association not set
+ */
+ GEOM::GEOM_Object GetTargetVertex();
+ };
+
+ /*!
+ * interface of "ProjectionSource2D" hypothesis.
+ * This hypothesis specifies a meshed face to take a mesh pattern from
+ * and optionally association of vertices between the source face and a
+ * target one (where a hipothesis is assigned to)
+ */
+ interface StdMeshers_ProjectionSource2D : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets a source <face> to take a mesh pattern from
+ */
+ void SetSourceFace(in GEOM::GEOM_Object face)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns the source face
+ */
+ GEOM::GEOM_Object GetSourceFace();
+
+ /*!
+ * Sets source <mesh> to take a mesh pattern from
+ */
+ void SetSourceMesh(in SMESH::SMESH_Mesh mesh);
+
+ /*!
+ * Return source mesh
+ */
+ SMESH::SMESH_Mesh GetSourceMesh();
+
+ /*!
+ * Sets vertex association between the source face and the target one.
+ * This parameter is optional.
+ * Two vertices must belong to one edge of a face
+ */
+ void SetVertexAssociation(in GEOM::GEOM_Object sourceVertex1,
+ in GEOM::GEOM_Object sourceVertex2,
+ in GEOM::GEOM_Object targetVertex1,
+ in GEOM::GEOM_Object targetVertex2)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns the <i>-th source vertex associated with the <i>-th target vertex.
+ * Result may be nil if association not set.
+ * Valid indices are 1 and 2
+ */
+ GEOM::GEOM_Object GetSourceVertex(in long i)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns the <i>-th target vertex associated with the <i>-th source vertex.
+ * Result may be nil if association not set.
+ * Valid indices are 1 and 2
+ */
+ GEOM::GEOM_Object GetTargetVertex(in long i)
+ raises (SALOME::SALOME_Exception);
+ };
+
+ /*!
+ * interface of "ProjectionSource3D" hypothesis.
+ * This hypothesis specifies a meshed shell or solid to take a mesh pattern from
+ * and optionally association of vertices between the source shape and a
+ * target one (where a hipothesis is assigned to)
+ */
+ interface StdMeshers_ProjectionSource3D : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets a source <shape> to take a mesh pattern from
+ */
+ void SetSource3DShape(in GEOM::GEOM_Object shape)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns the source shape
+ */
+ GEOM::GEOM_Object GetSource3DShape();
+
+ /*!
+ * Sets source <mesh> to take a mesh pattern from
+ */
+ void SetSourceMesh(in SMESH::SMESH_Mesh mesh);
+
+ /*!
+ * Return source mesh
+ */
+ SMESH::SMESH_Mesh GetSourceMesh();
+
+ /*!
+ * Sets vertex association between the source shape and the target one.
+ * This parameter is optional.
+ * Two vertices must belong to one edge of a shape
+ */
+ void SetVertexAssociation(in GEOM::GEOM_Object sourceVertex1,
+ in GEOM::GEOM_Object sourceVertex2,
+ in GEOM::GEOM_Object targetVertex1,
+ in GEOM::GEOM_Object targetVertex2)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns the <i>-th source vertex associated with the <i>-th target vertex.
+ * Result may be nil if association not set.
+ * Valid indices are 1 and 2
+ */
+ GEOM::GEOM_Object GetSourceVertex(in long i)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns the <i>-th target vertex associated with the <i>-th source vertex.
+ * Result may be nil if association not set.
+ * Valid indices are 1 and 2
+ */
+ GEOM::GEOM_Object GetTargetVertex(in long i)
+ raises (SALOME::SALOME_Exception);
+ };
+
+ /*!
+ * interface of "SegmentLengthAroundVertex" hypothesis.
+ * This hypothesis specifies length of segments adjacent to the vertex the
+ * hypothesis is assigned to
+ */
+ interface StdMeshers_SegmentLengthAroundVertex : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Sets <length> parameter value
+ */
+ void SetLength(in double length)
+ raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Returns <length> parameter value
+ */
+ double GetLength();
+ };
+
+ /*!
+ * StdMeshers_QuadrangleParams: interface of "Quadrangle Params" hypothesis
+ */
+ interface StdMeshers_QuadrangleParams : SMESH::SMESH_Hypothesis
+ {
+ /*!
+ * Set base vertex for triangles
+ */
+ void SetTriaVertex( in long vertID );
+
+ /*!
+ * Returns base vertex for triangles
+ */
+ long GetTriaVertex();
+
+ /*!
+ * Set entry of the main object
+ */
+ void SetObjectEntry( in string entry );
+
+ /*!
+ * Get the entry of the main object
+ */
+ string GetObjectEntry();
+ };
+
+ /*!
+ * StdMeshers_SegmentAroundVertex_0D: interface of "SegmentAroundVertex" algorithm
+ */
+ interface StdMeshers_SegmentAroundVertex_0D : SMESH::SMESH_0D_Algo
+ {
+ };
+
/*!
* StdMeshers_Regular_1D: interface of "Wire discretisation" algorithm
*/
{
};
+ /*!
+ * StdMeshers_CompositeSegment_1D: interface of "Composite side discretisation" algorithm
+ */
+ interface StdMeshers_CompositeSegment_1D : SMESH::SMESH_1D_Algo
+ {
+ };
+
/*!
* StdMeshers_MEFISTO_2D: interface of "Triangle (Mefisto)" algorithm
*/
{
};
+ /*!
+ * StdMeshers_Prism_3D: interface of "3D extrusion" algorithm
+ */
+ interface StdMeshers_Prism_3D : SMESH::SMESH_3D_Algo
+ {
+ };
+
+ /*!
+ * StdMeshers_RadialPrism_3D: interface of "Radial Prism" algorithm
+ */
+ interface StdMeshers_RadialPrism_3D : SMESH::SMESH_3D_Algo
+ {
+ };
+
+ /*!
+ * StdMeshers_Projection_3D: interface of "Projection 3D" algorithm
+ */
+ interface StdMeshers_Projection_3D : SMESH::SMESH_3D_Algo
+ {
+ };
+
+ /*!
+ * StdMeshers_Projection_2D: interface of "Projection 2D" algorithm
+ */
+ interface StdMeshers_Projection_2D : SMESH::SMESH_2D_Algo
+ {
+ };
+
+ /*!
+ * StdMeshers_Projection_1D: interface of "Projection 1D" algorithm
+ */
+ interface StdMeshers_Projection_1D : SMESH::SMESH_1D_Algo
+ {
+ };
+
+ /*!
+ * StdMeshers_UseExisting_2D: interface of "UseExisting 2D" algorithm
+ * doing nothing to allow mesh generation by mesh edition functions in TUI mode
+ */
+ interface StdMeshers_UseExisting_2D : SMESH::SMESH_2D_Algo
+ {
+ };
+
+ /*!
+ * StdMeshers_UseExisting_1D: interface of "UseExisting 1D" algorithm
+ * doing nothing to allow mesh generation by mesh edition functions in TUI mode
+ */
+ interface StdMeshers_UseExisting_1D : SMESH::SMESH_1D_Algo
+ {
+ };
+
+ /*!
+ * StdMeshers_RadialQuadrangle_1D2D: interface of "Radial quadrangle" algorithm
+ */
+ interface StdMeshers_RadialQuadrangle_1D2D : SMESH::SMESH_2D_Algo
+ {
+ };
+
};
#endif
