<li>In the \b Mesh menu select <b>Create Mesh</b> or click <em>"Create
Mesh"</em> button in the toolbar.
+ <center>
\image html image32.png
<em>"Create Mesh" button</em>
+ </center>
The following dialog box will appear:
mesh in the Object Browser and click "Select" button near \b Geometry
field (if the name of the object has not yet appeared in \b Geometry field).
+ <center>
\image html image120.png
<em>"Select" button</em>
+ </center>
Now you can define 3D Algorithm and 3D Hypotheses, which will be
applied to the solids of your geometrical object. Click the <em>"Add
Hypothesis"</em> button to add a hypothesis.
+ <center>
\image html image121.png
<em>"Add Hypothesis" button</em>
+ </center>
Click the <em>"Edit Hypothesis"</em> button to change the values for the
current hypothesis.
+ <center>
\image html image122.png
<em>"Edit Hypothesis" button</em>
+ </center>
Most standard 2D and 3D algorithms can work without hypotheses
using some default parameters. The use of additional hypotheses
the higher dimension algorithm.
Some algorithms generate mesh of several dimensions, while others
- produce mesh of only one dimension. In the latter case there must be one Algorithm and zero or several
+ produce mesh of only one dimension. In the latter case there must
+ be one Algorithm and zero or several
Hypotheses for each dimension of your object, otherwise you will
not get any mesh at all. Of course, if you wish to mesh a face,
which is a 2D object, you do not need to define a 3D Algorithm and
In the <b>Object Browser</b> the structure of the new mesh will be
displayed as follows:
- \image html image88.jpg
+ <center>
+ \image html image88.jpg
+ </center>
- It contains:
+ It contains:
<ul>
<li>a reference to the geometrical object on the basis of
which the mesh has been constructed;</li>
select \b Preview or click "Preview" button in the toolbar or activate
"Preview" item from the pop-up menu.
+<center>
\image html mesh_precompute.png
<em>"Preview" button</em>
+</center>
Select <b>1D mesh</b> or <b>2D mesh</b> preview mode in the Preview dialog.
the <b>Object Browser</b>. From the \b Mesh menu select \b Compute or
click "Compute" button of the toolbar.
+<center>
\image html image28.png
<em>"Compute" button</em>
+</center>
-The Mesh Computation information box appears.
+After the mesh computation finishes, the Mesh Computation information
+box appears. In case of a success, the box shows
+information on number of entities of different types in the mesh.
\image html meshcomputationsucceed.png
If the mesh computation failed, the information about the cause of the
-failure is provided.
+failure is provided in \b Errors table.
\image html meshcomputationfail.png
After you select the error, <b>Show Sub-shape</b> button allows
-visualizing in magenta the geometrical entity that causes it.
+visualizing in magenta the geometrical entity that causes the error.
\image html failed_computation.png
<em>3D algorithm failed to compute mesh on a box shown using <b>Show
Sub-shape</b> button</em>
-
-\note Mesh Computation Information box does not appear if you set
-"Mesh computation/Show a computation result notification" preference
-to the "Never" value. This option gives the possibility to control mesh
-computation reporting. There are the following possibilities: always
-show the information box, show only if an error occurs or never.
-By default, the information box is always shown after mesh computation operation.
-
<b>Publish Sub-shape</b> button publishes the sub-shape, whose meshing
has failed, in GEOM component as a child of the mesh geometry, which
allows analyzing the problem geometry and creating a submesh on it in
switching the mesh to Wireframe visualization mode or switching off
the visualization of faces and volumes (if any).
+<b>Bad Mesh to Group</b> button creates groups of the bad mesh entities,
+thus allowing you for more comfortable analysis of these entities.
+
\image html show_bad_mesh.png
-<em>Too close nodes causing meshing failure are shown in magenta using <b>Show
+<em>Edges bounding a hole in the surface are shown in magenta using <b>Show
bad Mesh</b> button</em>
+
+\note Mesh Computation Information box does not appear if you set
+"Mesh computation/Show a computation result notification" preference
+to the "Never" value. This option gives the possibility to control mesh
+computation reporting. There are the following possibilities: always
+show the information box, show only if an error occurs or never.
+By default, the information box is always shown after mesh computation operation.
+
<br><br>
\anchor use_existing_anchor
existing faces</b>.
For example, you want to use standard algorithms to generate 1D and 3D
meshes and to create 2D mesh by your python code. Then you
-<ul>
- <li> create a mesh object, assign a 1D algorithm,</li>
- <li> invoke \b Compute command, which computes a 1D mesh,</li>
+<ol>
+ <li> create a mesh object, assign an 1D algorithm,</li>
+ <li> invoke \b Compute command, which computes an 1D mesh,</li>
<li> assign <b>Use existing faces</b> and a 3D algorithm,</li>
<li> run your python code, which creates a 2D mesh,</li>
<li> invoke \b Compute command, which computes a 3D mesh.</li>
-</ul>
+</ol>
Consider trying a sample script demonstrating the usage of
\ref tui_use_existing_faces "Use existing faces" algorithm for
