underlying geometrical edge. <b>"Reverse Edges"</b> list box allows to
specify the edges for which the splitting should be made in the
direction opposing to their orientation. This list box is enabled only
-if the geometry object is selected for the meshing. In this case the
-user can select edges to be reversed either by directly picking them
+if the geometry object is selected for the meshing. In this case it is
+possible to select edges to be reversed either by directly picking them
in the 3D viewer or by selecting the edges or groups of edges in the
Object Browser.
pairs <b>t - F(t)</b>, where \b t ranges from 0 to 1, and the module computes the
formula, which will rule the change of length of segments and shows
in the plot the density function curve in red and the node
-distribution as blue crosses. The node distribution is computed the
+distribution as blue crosses. The node distribution is computed in the
same way as for
\ref analyticdensity_anchor "Distribution with Analytic Density". You
can select the <b>Conversion mode</b> from\b Exponent and <b>Cut
The direction of the splitting is defined by the orientation of the
underlying geometrical edge. <b>"Reverse Edges"</b> list box allows to
-specify the edges for which the splitting should be made in the
+specify the edges, for which the splitting should be made in the
direction opposing to their orientation. This list box is enabled only
-if the geometry object is selected for the meshing. In this case the
-user can select edges to be reversed either by directly picking them
+if the geometry object is selected for the meshing. In this case it is
+possible to select edges to be reversed either by directly picking them
in the 3D viewer or by selecting the edges or groups of edges in the
Object Browser.
\anchor automatic_length_anchor
<h2>Automatic Length</h2>
-This hypothesis is automatically applied when you select <b>Assign a
-set of hypotheses</b> option in Create Mesh menu.
-
-\image html automaticlength.png
-
The dialog box prompts you to define the quality of the future mesh by
only one parameter, which is \b Fineness, ranging from 0 (coarse mesh,
low number of elements) to 1 (extremely fine mesh, great number of
-elements). Compare one and the same object (sphere) meshed with
+elements).
+
+\image html automaticlength.png
+
+Compare one and the same object (sphere) meshed with
minimum and maximum value of this parameter.
\image html image147.gif "Example of a very rough mesh. Automatic Length works for 0."
